View fullsize

In this Field Test Shooting Video for the KJWorks MK1 Carbine Green Gas Airsoft Rifle, I checkout the velocity and power here in the Replica Airguns Indoor Airgun Shooting Range, to find out if the real world velocity is in the ballpark of the claimed 450+ fps velocity by KJWorks. I also shoot 10 rounds into a paper target from a distance of 30 feet to see how accurate of a grouping I can get. If you are interested in details, specifications and more close up video along with the Pro’s and Con’s for the KJWorks MK1 Carbine Green Gas Airsoft Rifle, then checkout my Table Top Video Review for it here.

Starting first with my velocity test, I loaded up the magazine with propane gas along with a full magazine of .20 gram Airsoft BB’s. The temperature was around 20 degrees Celsius or 68 degrees Fahrenheit, so not super warm or cold, in warmer conditions I would expect slightly higher fps from the KJWorks MK1 Carbine Green Gas Airsoft Rifle. KJWorks claims 450+ fps and my testing came pretty close to this with my five Chronograph readings hitting: 468, 451, 435, 436, 426 fps. Averaging 443 fps.

View fullsize

Next I made sure I still had 10 Airsoft rounds in the magazine and placed a fresh paper target 30 feet down range and shot all 10 rounds into the target using a semi rested shooting position, with my hands on a sand bag up front and sitting on a stool in the back. This allows me fairly stable shooting with less human factor. I did have to aim a few inches low on the center of the target as the KJWorks MK1 Carbine Green Gas Airsoft Rifle does shoot a bit high at 30 feet. 7 out of the 10 rounds hit all within about 2 inches of each other and then three rounds came out of the group increasing the 10 shot grouping from 2 inches to around 5 inches. I am wondering if perhaps I had some miss-formed Airsoft BB’s in the bunch as the shots that came out, really did come out a lot compared to the tighter 2 inch 7 shot main grouping.

Overall the KJWorks MK1 Carbine Green Gas Airsoft Rifle performed well, the velocity was right on the mark and was fairly consistent dropping off a bit as the Rifle cooled down from the gas. Accuracy was very good side to side but up and down I did notice more variation. The trigger is a double action only trigger so it is a bit longer and heavier than a real steel Ruger MK1 that is known for its beautiful short and light Single Action Trigger. Still the KJWorks MK1 Carbine Green Gas Airsoft Rifle performed well and I think with some good quality Airsoft BB’s, perhaps even a bit heavier than I used in this test, one could improve the accuracy at range and really be able to use this for some longer range outdoor Airsoft games. As it is a fairly light and short Rifle it would make for a super easy to pack around sniper rifle option.

• Buy the KJWorks MK1 Carbine Green Gas Airsoft Rifle in Canada

• Buy the KJWorks MK1 Carbine Green Gas Airsoft Rifle in the US

View fullsize

Type: Airsoft Gas Rifle.
Manufacturer: KJWorks.
Model: MK1 Carbine.
Materials: Metal and plastic.
Weight: 2.71 pounds (1.23 kg).
Total Length: 33 inches (83.8cm).
Barrel Length: 17 inches (43.2cm).
Barrel: Metal non-rifled.
Propulsion: Green Gas.
Action: Semi auto double action only trigger.
Hop-up: Adjustable metal Hop-up.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 17 round full size drop out metal magazine.
FPS: 450+.

View fullsize

Trigger Pull: The trigger pull on the KJWorks MK1 Carbine Green Gas Airsoft Rifle is double action only which will make it a bit longer and heavier than the real steal Ruger MK1 as it is Single Action Only. The trigger is smooth however and does have a nice satisfying click to it that sounds like a firing pin being release. The unfortunate part is that the real steel version has an amazing single action only trigger so the contrast between the Airsoft and 22LR version may make this gun not as practical is an optional training tool if you own the 22LR version.

View fullsize

Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting Test for this carbine, so stay posted for my official Field Shooting Test. For now you can watch my Ruger MK I Gas version Field Test Shooting Review to get an idea on how the KJWorks MK1 Carbine Green Gas Airsoft Rifle version should perform, as they are very similar with the Carbine version having a longer barrel and shoulder stock added to it with should increase the velocity and perhaps the accuracy a bit.

View fullsize

Build Quality: KJWorks as usual distributes quality Airguns, the fit and finish on the KJWorks MK1 Carbine Green Gas Airsoft Rifle is very good and there is good use of metal where it needs to be like with the upper receiver, the inner and outer barrel, the bolt and other internal mechanical parts, the trigger, the safety, the rear fully adjustable sight and the full size drop out metal magazine that holds the Gas and the Airsoft BB's.

View fullsize

Realism: The KJWorks MK1 Carbine Green Gas Airsoft Rifle is based on real steel Ruger MK1 and looks very close to it for the most part. There is no blowback operation or bolt operation so that means that only a double action trigger is possible, this is a bit unfortunate since the real Ruger MK1 has an absolutely beautiful smooth and light single action trigger. On the positive side you can field strip the KJWorks MK1 Carbine Green Gas Airsoft Rifle just like the real version but you will need to remove the rear stock that covers the area you need to get to to field strip it.

View fullsize

Pros:

• If you own a real Ruger 22LR you will be use to the design layout.

• Adjustable rear sight for windage and elevation.

• Metal hop-up for backspin tuning.

• Full size all metal drop out magazine that holds the Airsoft BB’s and gas.

• Satisfying trigger sound, sounds like a real firing pin a bit, not clanky like many other Airguns.

• Full Metal upper and barrel.

• Metal rear sight, bolt, trigger and magazine.

• Non blowback helps with velocity and gas efficiency.

• Field strips like original MK Series (will need to remover rear stock).

Cons:

• No blowback so longer DAO trigger not like the real steel Ruger MK 1.

• Some reviewers claim the hop-up is hard to adjust.

• May be a bit too powerful for use in close quarters Airsoft games.

View fullsize

Comments:

The KJWorks MK1 Carbine Green Gas Airsoft Rifle is really just a modified MK1 Pistol by adding a longer barrel and rear shoulder stock to the pistol grip. I guess it is a good use of an already popular pistol design to give us a light weight and somewhat compact Airsoft sniper rifle for Airsoft games as it does have a fairly high velocity claim. Because of the high 450+ fps I would not recommend it to anyone playing in close quarters as it could injure other players so keep that in mind. If you are looking for a lower cost and fairly compact Sniper Rifle for some outdoor shooting, then it might be just the right pick for that. I am hoping my upcoming Field Test Shooting Video showcases it nicely so keep checking back for that Review Video down the road a bit.

• Buy the KJWorks MK1 Carbine Green Gas Airsoft Rifle in Canada

• Buy the KJWorks MK1 Carbine Green Gas Airsoft Rifle in the US

This video was made right at the end of December 2024 but I am posting it in the new year so we will call it a late December video… That makes two Mystery Box Videos for December 2024 which means a lot of new products on my plate to review this new year. Hopefully I can get a bunch of them done before I head out to SHOT Show this year in a couple of weeks as I will have a lot of videos and interviews to post for SHOT Show as is always the case when I get back.

At least in this unboxing videos I can give you an idea of some of the new products we have in the Replica Airgun online Stores usually in both the Canada and the US Replica Airgun Stores. In this Unboxing Video I received 5 new products to show you. A Less Lethal Pistol and Spring Piston BB Pistol from Umarex, a Carbine Airsoft Rifle from KJWorks, a Multi-barrel super compact Airgun from Alias Airguns out of Canada, and Bug Exterminator from a company called Skell Inc. Here are some of the basics for each of them:

View fullsize

Umarex P2P HDP 50 Compact CO2 Paintball Gun

Type: Compact CO2 Training Rubber Ball Pistol.
Manufacturer: Umarex.
Model: P2P CO2 HDP Compact .50 Caliber Training Rubber Ball Pistol.
Caliber: .50 Caliber.
Ammo Type: .50 Caliber Powder Balls / Rubber Training Rounds.
Magazine Capacity: 4 Rounds.
Power Source: Single 8g CO2 Cartridge - 3 PCS INCLUDED.

View fullsize

Alias GEM Multi Ammo Mini CO2 Airgun

Type: CO2 Air Pistol.
Manufacturer: Alias Airguns.
Model: Gem.
Caliber: Multi Barrel Comes with 4.5mm Steel BB adn 6mm Airsoft.
Power Source: Single 8g CO2 Cartridge or 12 gram with adaptor.
Magazine Capacity: Single shot.
Buy the .50 Caliber Paintball Barrel Set: AA1002.
Buy the Rocket Barrel Set: AA1003.
Buy the 12 Gram CO2 Adaptor: AA1004.

View fullsize

Umarex DSX 45 Spring BB Pistol

Type: Spring Air BB Pistol.
Manufacturer: Umarex.
Model: DSX 45.
Ammo Type: 4.5mm Steel BBs.
Power Source: Spring Air.
Magazine Capacity: 13 Rounds (Rapid Load) with 200 Round Reservoir.

View fullsize

KJWorks MK1 Carbine Green Gas Airsoft Rifle

Type: Airsoft Rifle.
Manufacturer: KJ Works.
Model: MK-1 Carbine.
Power Source: Green Gas.
Action: Semi-Automatic.
Ammo Type: Airsoft BBs 6mm.
Ammo Capacity: 17 Rounds.

View fullsize

Bug-A-Salt 3.0 Insect Exterminator

Type: Pump Action Bug Exterminator.
Manufacturer: Skell Inc.
Model: Bug-A-Salt 3.0.
Ammo Type: table Salt.
Power Source: Spring Air.
Magazine Capacity: a bunch.

This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.

Let’s get into what I found in this most recent Mystery Box in order of appearance…

The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.

View fullsize

Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.

View fullsize

Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.

View fullsize

Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.

View fullsize

In this Preview Review Video I take a look at 4 newer products now in our Replica Airguns Online Store. One is a 4.5mm Steel BB Revolver, two are 6mm Airsoft Pistols and one is a .68 caliber Paintball Shotgun.

View fullsize

The first item I take look at in this video is the Umarex HK30 AEG Airsoft Pistol, this product is pretty entry level with analyst all plastic build and is very light to hold. It does however shoot in both semi and full auto since it is an AEG Airsfto Pistol (not many of them out there). The fps is rather low at a claimed fps at just under 200, the Umarex HK30 AEG Airsoft Pistol also comes with two 16 round remove; plastic magazines. Who knows, maybe it will be fun?

View fullsize

Next I take a look at the ASG Dan Wesson 2.5 inch 4.5mm Steel BB Gold Revolver. This is a CO2 powered shell loading BB revolver very much like similar ones I have reviewed in the past but in Gold finish. Will the gold finishes make it perform better, well I guess we better find out!

View fullsize

I then take a look at a “Glock Like” CO2 Blowback Airsoft Pistol for KJWorks called the KP13. It has a full size drop out metal magazine that holds the CO2 along with 24 rounds of 6mm Airsoft BB’s. The KJWorks KP-13 has a metal slide, metal magazine and polymer frame with a velocity over 360fps using the included barrel extension.

View fullsize

Last but perhaps the most interesting for me is the Umarex T4E HDB which is a lower cost Paintball/Rubber Ball Shotgun which could possibly be used for home protection? The T4E HDB is a mostly plastic constructed rifle with decent weight to it and uses an internal spring fed 16 round magazine. You will find all kinds of mounting points for accessories and for a sling on the Umarex T4E HDB and again at much lower cost than similar T4E rifle based Paintball/Rubber ball Airguns.

In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.

View fullsize

First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.

• 13 Oz Aluminum

• 10 Inches Long

• 2 Inches Diameter

• Integrated Pressure Gauge

• Includes Buttstock

• CO2 Adaptor Included

• 3000 PSI Fill

• 1100 PSI Regulated

View fullsize

Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.

• 6mm Airsoft BB’s

• Green Gas / Propane

• 370 fps

• 25 Round Magazine

• 2 Pounds

View fullsize

Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!

• 6mm Airsoft BB’s

• Green Gas / Propane

• 9.4 Inches

• 366 fps

• 28 Round Magazine

• 2.4 Pounds

View fullsize

Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.

• 4.5 mm Steel BB’s

• CO2 x 1

• 4.2 Inch Barrel

• 330 fps

• 19 Round Magazine

• 2.4 Pounds

• Comes with Laser Sight

View fullsize

Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.

• 6mm Airsoft BB’s

• CO2 x 1

• 36 Inches

• 440 fps

• 15 Round Magazine

• 3.5 Pounds

View fullsize

Type: Airsoft Rifle.
Manufacturer: KJWorks.
Model: M700P.
Materials: Metal with textured synthetic stock.
Weight: 7.8 pounds (3600 grams).
Barrel: Smooth bore barrel.
Propulsion: Gas operated (Green Gas or propane).
Action: Bolt..
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 10-11 round metal magazine.
FPS: Up to 550fps.

Trigger Pull: the trigger on the KJWorks M700P Gas Bolt Action Airsoft Rifle is what you would expect from a bolt action style hunting/sniper rifle. The working of the bolt does most of the work for your trigger finger so all that is required is the release of the firing pin from a very short and light tigger.

View fullsize

Accuracy: Checkout my full field test shooting video for the KJWorks M700P Gas Bolt Action Airsoft Rifle to see how it performed in detail. I did only shoot it inside the Sea Can shooting range since the weather outside this time of year is not favorable especially for gas guns so I was limited to ab out 30 feet, perhaps I can retest the KJWorks M700P Gas Bolt Action Airsoft Rifle outdoors at longer ranges when the weather is better. That said the KJWorks M700P Gas Bolt Action Airsoft Rifle did shot about a 1.5 inch shot grouping and averaged about 400 fps using .20 gram Airsoft BB's.

View fullsize

Build Quality: The KJWorks M700P Gas Bolt Action Airsoft Rifle is well built all around and the fit and finish feel good. all the mechanical parts functioned without any problems and I do like the textured stock and nice rubber butt pad. I did notice a couple of spots on the textured stock where it there where cosmetic imperfections, perhaps this is form the moulding of it?

Realism: The KJWorks M700P Gas Bolt Action Airsoft Rifle is based around the Remington 700 platform which looks like your standard high powered hunting rifle. The Airsoft version looks and functions just like the real deal since we are using Green Gas rather than a spring making the bolt easy and smooth to operate.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Bolt is super easy to use compared to a Spring style bolt action Airsoft rifle.

• Textured stock feels great.

• Lots of sight option with the built in scope rail and removable adjustable iron sights.

• Ready for Bipod or sling.

• Full size drop out metal magazine that holds the Gas and Airsoft BB’s.

• Easy to adjust Hop-up screw.

Cons:

• FPS was a little bit lower than expected.

• Was not able to get 11 rounds into the magazine.

• Some imperfections on the textured stock.

View fullsize

Comments:
I have revised a couple of spring bolt action Airsoft rifles in the past and although it's nice that all you need is a bag of Airsoft BB's and your ready to shoot, having the Gas operation makes the bolt so  much easier to operate allowing for much quicker follow up shoots. The more time you have to acquire your next target and make the shot can make all the difference when your enemy is closing in. The KJWorks M700P Gas Bolt Action Airsoft Rifle is a nice ready to shoot out of the box Airsoft rifle that if you want to can be customized pretty easy with a bipod or scope which I would recommend since not only will this make the KJWorks M700P Gas Bolt Action Airsoft Rifle look a lot better but also way more practical.

My YouTube Table Top Review Video for the KJWorks M700P Gas Bolt Action Airsoft Rifle:

View fullsize

I'm trying to remember if I have ever reviewed a Gas Operated Bolt Action Airsoft Rifle before or not? I know I have reviewed Spring Operated Bolt Action Airsoft Rifles but I think this is a first for me. With Spring Bolt Action Airsoft Rifles there is some work involved in the back and forth movement of the bolt since the power is coming from the spring tension, compared to a Gas Bolt Action Airsoft system there is virtually no resistance in the bolt so you can get off your follow up shots a lot quicker.

View fullsize

I would like to get out and test the KJWorks M700P Gas Bolt Action Airsoft Rifle at a much longer distance than here in my Indoor Sea Can Airgun Range but the weather outside right now is kind of cold and wet. Perhaps in the summer I can do a revisit of the KJWorks M700P Gas Bolt Action Airsoft Rifle and test it out at a much longer range using heavier Airsoft BB's.

View fullsize

For this indoor short range testing I used .20 gram Plastic Airsoft BB's and placing 5 shots through my Chrony Chronograph I got a an average of 382 fps. The gas magazine was fully topped up using propane gas and the temperate was around 15 degrees Celsius (60 degrees Fahrenheit).

View fullsize

Again using .20 gram Plastic Airsoft BB's I then performed my close range accuracy test (about 30 feet away) and the KJWorks M700P Gas Bolt Action Airsoft Rifle shot about a 1.5 inch grouping with one outlier that went kind of low, perhaps a bad Airsoft BB? With most sniper style Airsoft rifles you will want to use heavier gram Airsoft BB's which should help with accuracy so I would expect the KJWorks M700P Gas Bolt Action Airsoft Rifle to tighten up a bit using a .30 or higher gram BB.

View fullsize

I was surprised at how quiet the KJWorks M700P Gas Bolt Action Airsoft Rifle was and didn't mind the peep sights after some getting use to. I would recommend adding a 3 power or higher scope to the included scope mount. Throw a Bipod on the KJWorks M700P Gas Bolt Action Airsoft Rifle and you have yourself a nice sniper rifle setup indeed.

View fullsize

I don't get many Gas Blowback Airsoft Rifles to review all that often so when I get my hands on them I sure have a great time testing them out and feeling the blowback action tapping me in the shoulder as I shoot in semi or full auto modes. Sure Gas Blowback Airsoft Guns don't perform like their AEG counterparts, especially when you're shooting in full auto. You can expect way less rounds in each magazine and even with less rounds the last 5 or 10 shots when shooting rapid fire are going to be compromised but I really don't care because a well made Gas Blowback Airsoft rifle like the KJWorks M4 CQB Carbine GBB is just so much more fun to shoot than an AEG and way more realistic.

View fullsize

So let's get on with my test results for the KJWorks M4 CQB Carbine GBB Airsoft Rifle... The fps consistency was really decent, super consistent when I spaced out my 5 test shots they averaged 377 fps, not really having any low or high fps shots out of the bunch. I did have a full gassed up mag and was using .20 gram plastic 6mm Airsoft BB's for this part of the field test.

Again shooting in semi auto mode, I placed 10 rounds into my paper target setup downrange 30 feet and as per usual I was using a rested shooting setup sitting on a stool and resting the KJWorks M4 CQB Carbine GBB Airsoft Rifle on a sandbag up front. 9 out of the 10 rounds all grouped in about a 3/4 inch group with only 1 round coming outside a bit stretching the 10 shot grouping out to about 1.5 inches. Still really great for a Gas Blowback or any Airsoft rifle for that matter!

View fullsize

Next I shot the rest of the mag in full auto burst mode which was about 20 rounds left in the KJWorks M4 CQB Carbine GBB Airsoft Rifle at this point. As expected the KJWorks M4 CQB Carbine GBB Airsoft Rifle cooled down pretty quick and the last 5 rounds did fire just fine but there was a noticeable drop in power making the rounds shoot low on the target. Keep in mind I was shooting in a not too warm environment, about 15 degrees which is not bad but also not that warm.

View fullsize

I would have liked to have seen the KJWorks M4 CQB Carbine GBB Airsoft Rifle perform as consistently in full auto mode as it did in semi auto but that would have been asking  a bit too much from a Gas Blowback Airsoft rifle. The KJWorks M4 CQB Carbine GBB Airsoft Rifle is a really well put together Airsoft Rifle that didn't let me down in the end.

It's been a great year for Replica Airguns and I wanted to share with everyone some of my favorites that I reviewed this year. In this Vimeo Video I show some of my top Replica Airgun picks for 2016 and talk a little bit about each one and what I like about it.

Here is a list of the Replica Airguns in this lineup:

• ASG Dan Wesson 715 CO2 Revolver - Comes in 4.5mm Steel BB, 6mm Plastic Airsoft & .177 Pellet.

• Umarex Colt Combat Vet CO2 Blowback 1911 - 4.5mm Steel BB.

• Sig Sauer MPX ASP CO2 Rifle - .177 Pellet.

• Sig Sauer ASP P226 CO2 Blowback Pistol - .177 Pellets.

• Air Venturi ISSC M22 CO2 Blowback Pistol - 4.5mm Steel BB.

• KJWorks KC-02 V2 Ruger 10/22 GBB Rifle - 6mm Plastic Airsoft.

• Umarex S&W M&P40 CO2 Blowback Pistol - 4.5mm Steel BB.

Type: Airsoft Rifle.

Manufacturer: KJWorks

Model:KP-02 Version 2

Materials: Metal and Nylon Fiber build.

Weight: 5.84 Pounds (2650 Grams).

Barrel: 13 inch metalnon-rifled smooth bore.

Propulsion: Green gas or 12 Gram CO2 dependant on magazine used.

Action: Blowback,Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 29 rounds.

FPS: 410-440 fps

Trigger Pull: The trigger pull on the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine is pretty much exactly like a real Ruger 10/22, nice and short, not to light or heavy, crisp and single action only. If you already have a Ruger 10/22 and want to pickup this Airsoft version for some anytime shooting then you will not be disappointed in the trigger since it is already what you are used to.

Accuracy: I decided to setup my paper target a little further out than my standard 30 feet, so I took it back to around 50 feet and put around 24 shots into it in a fairly quick succession from a rested position. The KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine grouped continently and well centred on target getting around a 3 inch grouping. This was using a red dot scope but with the out of the box hop-up setting in place. I was a little bit surprised by my fps results as my Chronograph recorded an impressive 445 average 5 shot fps using the lower powered green gas magazine. All shot where within only a few fps of each other too! I can only imagine how hard this gun would shoot using the alternative CO2 Magazine. Blowback action was just enough to give some feedback and of course allowed for the bolt to cycle giving the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine a true single action trigger pull.

Build Quality: The build quality for all KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine is very good with a nice weight and feel to it, It really does feel like I am holding a real Ruger 10/22 and it is one of the most popular semi auto 22LR rifles out there for a reason. Mechanically this Ryger 10/22 copy works great, super consistent and very responsive. The fit and finish as with all KJWorks guns is top notch.

Realism: The KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine is for all intents and purposes simple an Airsoft version of the Ruger 10/22 and even though I have no way to confirm this, I would imagine many 10/22 after market accessories may actually work with the KJWork 10/22 Gas Blowback Airsoft Carbine. Everything works just like it would on a real 10/22 without the loud noise and ejecting shells.

Available in the:Replica Airguns Store

Pros:

• Built on the very popular 10/22 platform so lots of people are going to be very familiar with this rifle and may want an Airsoft version they can shoot just about any time they feel like it.

• Good weight and feel to it.

• Blowback semi auto action with true single action trigger.

• Lots of rail access points for tons of add on accessories.

• Pop-up fully adjustable sights stay out of the way but are ready to go when needed.

• Easy to adjust Hop-up.

• Available magazines in both CO2 and Green Gas.

• Adjustable AR styled rear stock with AR pistol grips.

• Sling mounts included.

• Works with standard Airsoft screw on flash hider or suppressors.

• Awesome FPS and consistency.

• Very accurate even at 50 feet, around a 3 inch 25 shot grouping.

Cons:

• No full auto mode.

• Higher capacity mag would have been nice.

• Would be nice to have a higher capacity magazine for it.

Comments:

I am really impressed with the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine! It feel and shoots a lot like the real steel version but with less noise and recoil. For back yard shooting fun and practice you can not find a cheaper gun out there to simulate shooting your real 10/22 and of course this rifle used on an Airsoft field would be a perfect fir for almost any shooting environment since it is light, compact, accurate and powerful. I think I found my newest favorite Blowback Airsoft Rifle :)

My Vimeo Table Top  Review of the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine:

Buy the KJWork KC-02 V2 10/22 Gas Blowback Airsoft Carbine in Canada

We recently recieved a KJWorls shipment so make sure to take a look at the full line of top quality KJWorks items we have in our Canada Replica Airguns Online Store.

I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).

I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).

And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)

So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!