Entries in Pellet,AEG

G&G RK Beta AK AEG Airsoft Rifle Table Top Review

No Comments

Type: AEG Airsoft Rifles
Manufacturer: G&G.
Model: RK Beta AK
Materials: Mostly metal/some plastic.
Weight: 7.1 pounds (3.2 kg).
Total Length: 28.5 inches (72.4 cm).
Barrel: 9 inches (22.9 cm) barrel non-rifled.
Propulsion: AEG.
Action: Single action semi & full auto.
Ammunition Type: 6mm plastic Airsoft BB’s.
Ammunition Capacity: High cap 600 round magazine.
FPS: 390 fps.

Trigger Pull: The trigger pull on the G&G RK Beta AK AEG Airsoft Rifle is short and light as it is basically a simple electric on/off switch that completes a circuit and tells the motor to turn, which activates the cycling of the spring piston. For this reason there is no real creep or feel of a release. When you get to a preset point in the trigger, the motor circuit is closed allowing for either semi or full auto, depending on your selector switch position at the time.

Accuracy: I will be making a dedicated Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle to find out what the actual velocity is in fps. I will also test what kind of accuracy I can get shooting a paper target in both semi and full auto from 30 feet away. For now I have no idea what to expect but as this is most certainly not a cheap Airsoft AEG Rifle, I am hoping for good results to justify the higher price point.

Build Quality: The build quality of the G&G RK Beta AK AEG Airsoft Rifle is very good, G&G Airsoft Rifles in general are well built. You are going to find metal in most of this AEG Airsoft Rifle including the receiver, dust cover, trigger guard, trigger, selector switch, barrel, front and rear sights and the magazine. The only plastic to be found will be in the pistol grip, rear stock and 3 of the picatinny rails. Fit and finish is very good but the stock and pistol grip material does seem to show scratches really easily.

Realism: The G&G RK Beta AK AEG Airsoft Rifle is a 1 to 1 scale Airsoft reproduction of the AK 47/74 in a compact modernized version. I don’t believe it is based on exactly one specific brand or type of AK 47 or AK 74, but is more or less a stylized version designed and built by G&G. The G&G RK Beta AK AEG Airsoft Rifle does have a lot of metal and weight to it adding to the realism and most of the mechanical parts work similar to a real steel version of an AK 47/74. G&G has added a bit of a bolt cycle motion with a motor that actuates it to some degree but this is not like the look and feel of a real internal bolt from an actual AK 47/74. Still a nice touch.

Pros:

  • Lots of metal in construction where you need it with good overall weight and feel.

  • 6 rail attachment options up front for lots of mounting positions.

  • Left side option to attach an additional AK style sight mount.

  • Adjustable front sight for elevation.

  • Nice and compact for easy maneuverability.

  • Rear stock has lots of room for battery sizes and options.

  • Dust cover comes off for easy access to internals.

  • G&G high quality build.

  • Comes with sling mounting options.

  • Super easy hopup adjustment slider.

  • Nice high capacity 600 round metal magazine.

  • No orange tip.

Cons:

  • Rear sight is all but useless.

  • Stock and grip scratch really easily.

  • Priced on the higher side.

Comments:

The G&G RK Beta AK AEG Airsoft Rifle may be priced a bit on the high side for some people but it is a solid AEG Airsoft Rifle and it seems there are not as many AK options out there so it is nice to have an offering from G&G. I like the almost full metal construction and I find the modernized styling and compact size to be appealing and would make it a great option for CQB Airsoft games. I am not sure what is going on with the rear site, as it looks like it is a sight, but does not have the sight grove in it? Maybe I am missing something here but other than opting to put a red dot way up front, your only other option is to put an AK side rail and mount a sight on the rear just above the metal dust cover. I am hoping when I make my Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle, it performs well for me to justify the higher price point.

My Vimeo Table Top Review for the G&G RK Beta AK AEG Airsoft Rifle:

Categories: 6mm, AEG, Airsoft, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: G&G, RK Beta, AK-47, Kalashnikov AK47, Kalashnikov AK74

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol Field Test Review

No Comments

In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here

When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.

Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.

All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.

Categories: 4.5mm / .177 cal, Field Test, Pellet, Pistol, Review, Single Shot, Spring Piston, Vimeo Video, Break Barrel Tags: Umarex, Markpoint

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle FIeld Test Review

No Comments

In this Field Test Shooting Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle, I get to test out a Replica .22 Caliber CO2 Rifle which I don’t get the chance to do so very often and .22 caliber combined with a Replica in a an Airgun is very uncommon! Well today I got to test one out and it was a lot of fun, I would say it performed very well for me. As usual, my main goal is to find out what the real world velocity is in fps and also to see how accurate the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is shooting at a paper target 30 feet away. Also make sure to checkout my Table Top Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for more details and specifications and close up video.

First in my to-do list was the velocity portion of my Field Test, and so I loaded up dual 12 gram CO2 cartridges into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle along with 10 preloaded .22 caliber shells. By the way I was using Gamo 15.43 grain (1 gram) lead pellets and the temperature was just a bit below room temperature, so not 100% ideal for maximum velocity but still warm enough for my purposes. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shot an average 5 shot velocity of 390 fps with the fastest shot hitting 411 fps and the slowest performer hitting 370 fps. That works out to 5.78 average foot pounds of energy.

Next up, I first recovered the 5 ejected shells I used in the velocity test, and again reloaded them with some more pellets and then back into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for my accuracy test. Keep in mind with a lever action rifle, I have to remove the rifle from my shooting position each time to work the lever action and chamber a round. This does cause me to have to fully reset for each shot which does kind of break a shooting grove just a bit, but it did not seem to make much of a difference as my accuracy results where still very good. I did notice vertically the grouping was about 2 inches while side to side it was closer to 1 inch. I attribute this to the sighting system as it was hard for me to focus on the rear sight and make sure I had it perfectly level with the front sight for each shot, which would account for some variation in elevation. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle was also shooting about 2 inches high from my aim point.

I have said this a bunch of times before, but I do really love shooting lever action rifles. Even a low cost Red Ryder BB Rifle brings a smile to my face. I also have a Henry Lever Action 22LR that I also really enjoy shooting when I get the chance. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is a really sweet looking rifle that performs as good as it looks thankfully! It’s also well priced for what you get in my opinion at just under $300 Canadian at the time of this video. If you want a fairly powerful Replica Air Rifle that hits hard and true and is super fun to shoot then get this one but make sure to get a bunch of extras shells cause they like to disappear on you pretty quickly. For now I still have all 10 of mine but they love to hide in the craziest places when they get ejected :)

Categories: .22 cal, CO2, Field Test, Pellet, Review, Rifle, Vimeo Video Tags: Barra, Barra 1866

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle Table Top Review

No Comments

Type: CO2 Pellet Rifle.
Manufacturer: Barra.
Model: Barra 1866 Lever Action.
Materials: Mostly plastic/some metal.
Weight: 6.5 pounds 2.9kg).
Total Length: 38.5 inches (90.7cm).
Barrel: 18.75 (47.6) barrel rifled.
Propulsion: Dual 12 gram CO2.
Action: Lever Action SAO.
Ammunition Type: .22 Caliber Pellets.
Ammunition Capacity: 30 round magazine.
FPS: 410 fps.

Trigger Pull: The trigger pull on the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is light short and crips with just a little bit of take-up before it releases. You will have to first either work the lever action which also chambers a preloaded shell into the breach of the barrel, or you will have to pull the hammer back in order for the trigger to be active as a single action trigger.

Accuracy: At this time I have not made my Field Test Shooting Video or shot the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. I am really looking forward to testing it out when I make my Filed Test Shooting Video Review for it hopefully soon! Barra claims is will shoot .22 caliber pellets up to 410 fps. I am not sure if this is for mid grain or light grain pellets but we will find out again when I make my shooting review video. The rear sight does have three positions of elevation so I should be able to find one that works here my Indoor Sea Can Airgun range where I setup paper targets at 30 feet away. I am hoping the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shoots close to the bullseye out of the box as it does not have any windage adjustment to space of.

Build Quality: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle seems to very well built and has a lot theft to it weighing in at 6.5 pounds so it feel very solid to hold and shoulder. It is mostly all metal which from what I can see, only the stock is plastic rather than actual wood. The faux wood does look very real and unless you get in close to it and notice none of the real wood imperfection, then you can figure out it is emotion wood. The fit and finish is all quality and I expect the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle to perform reliably.

Realism: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is based on the Winchester 1866 Lever Action Rifle and does look the part with all the expected working parts found on a lever action rifle. Barra has included a thumb safety behind the hammer along with a grip safety that requires the shooter to hold the lever tight to the stock or you will not be able to pull the trigger. Being a shell loading design that requires preloading pellets into the shells and then loading those shells into the rifle tub magazine also makes the experience feel very real. Barra has done a great job hiding the CO2 being the butt plate and the barrel open is about the diameter of a 45 caliber bullet.

Pros:

  • Not many rifles come in .22 Caliber. Should have a bit more down range power over .177 caliber.

  • Almost all metal construction with good weight and feel to it.

  • The Faux Wood stock looks very realistic, hard to tell it’s plastic!

  • Octagonal recessed barrel adds to realism.

  • White writing is mostly under the barrel so fairly discreet.

  • The gold receiver and but plate add to the look of quality.

  • Rear sight has three positions for different ranges and sighting types (standard low, peep mid, high distance).

  • Also have the option of mounting a red dot or magnified optical sight on the rear compact picatinny rail.

  • Dual 12 gram CO2 system is less expensive and reduces the cool down effect while allowing for lots of pellet reloads between heaving to change the CO2.

  • Has a secondary safety on the lever, it must be pressed into the stock to shoot, kind of like a grip safety.

  • Claimed 410 fps should be more than sufficient for mid range shooting.

  • Lever action rifles are just so much fun to shoot!

Cons:

  • Rear sight is not adjustable for windage.

  • More than likely going to lose some shells if you are shooting outside in the yard as they all eject into the grass or who knows where? Will probably need to buy some backup shells over time.

  • You will have to hold the lever snug to the stock or the trigger will not work.

Comments:

I was super excited this year at SHOT Show when I went to the Barra Booth and the Barra Team showed me their new Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. We also spoke about how the .22 caliber version shoudl be Canada friendly as it was under 500 fps. Here we now and I finally got my hands on one and it is nice to have a .22 Caliber Replica CO2 Lever Action Rifle available to us Airgun Collectors. Sure Umarex has their Legends CO2 Shell Loading BB Rifle but I like The Barra 1866 shooting pellets over BB’s. Price point for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is very reasonable for what you get as it is a lot of gun for the money. I am really looking forward to seeing how well it shoots and if it can get close to the claimed 400 fps.

My Vimeo Table Top Review for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle:

Categories: .22 cal, CO2, Pellet, Review, Rifle, Vimeo Video Tags: Barra 1866, Barra

September 2024 Another Mystery Box Unboxing Video

No Comments

Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…

Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle

  • ManufacturerBarra Airguns

  • Caliber: 0.22

  • Powerplant: CO2

  • Action: Lever

  • Loudness: Level 2

  • Max Velocity: 450 fps and above

  • Shot Capacity: 10

  • Weight: 6.5 lbs

  • Barrel Length: 18 inches

  • Total Length: 38.5 inches

  • Stock: Faux Wood

  • Barrel: Smoothbore

  • Sound Suppression: No

  • Trigger: 3 lbs

  • Safety: Manual and Grip

  • Optic Mount: Picatinny mount

  • Recommended Use: Plinking

Umarex HK 416 A4 GBB Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer: Umarex / KWA (Licensed by H&K)

  • PropulsionGas Blowback

  • Caliber: 6mm plastic Airsoft BB's.

  • Muzzle Velocity: 400~ FPS (Measured with 0.20g BBs)

  • Magazine Capacity: 30~rds

  • Gas Type: Green Gas, Propane

  • Fire Modes: Semi / Full-Auto / Safety

  • Hopup: Yes, Adjustable

  • Inner Barrel: 390~mm

  • Length: 790mm - 875mm

  • Weight: 2900g

  • Package Includes: Gun, Magazine, Manual

G&G RK Beta AK AEG Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer:G&G Armament

  • Model: RK Beta

  • Materials: Metal and PlasticWeight:

  • Barrel: Smoothbore

  • Power Source: Electric (Battery)

  • Action: Semi-Automatic/Full-Automatic

  • Ammo Type: Airsoft BBs 6mm

  • Ammo Capacity: 600 Rounds

  • FPS:390

Categories: 6mm, .22 cal, AEG, Airsoft, Blowback, CO2, Full Auto, Gas, GBB, Pellet, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, Barra, G&G, HK416, AK-47, RK Beta, Barra 1866

September 2024 Mystery Box Unboxing Video

No Comments

In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.

First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.

The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.

Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.

The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.

I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.

Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun

  • Type: Paintball gun

  • Model: T4E Walther PDP

  • Materials: Durable polymer and matte finish

  • Power Source: CO2

  • Weight: 690 g (1.52 lb)

  • Barrel: 4 in

  • Action: Semi-automatic, single-action, blowback

  • Ammo type: Paint, dust, and rubber .43 caliber ammo

EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol

  • FPS Range: 380-430

  • Dimensions: 205mm x 150mm

  • Holster Compatibility: EMG SAI 2011 pistols feature a slightly wider frame and may not fit some TM/WE compatible 2011 holsters

  • Magazine: 30+1 rounds.

  • Gas Type: CO2

  • Firing Mode: Semi Automatic, Safety

  • System: Gas Blowback

  • Hopup: Yes, Adjustable

  • Package Includes: Gun, Magazine, and Manual

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol

Caliber: .177 caliber that ensures accuracy and precision.

  • Stock Finish: Boasting a sleek black polymer finish, exuding a modern and tactical style.

  • Type: a lever cocking mechanism for swift and efficient operation.

  • FPS: With an impressive velocity of 425, delivers powerful and precise shots with every trigger pull.

  • Overall Length: Exhibiting a compact design with a total length of 10.8 inches, perfect for various shooting scenarios.

Umarex HK416 CO2 Blowback Burst BB Rifle

  • Type: BB Rifle

  • Manufacturer: Umarex

  • Model: Heckler & Koch HK416

  • Materials: Metal and Polymer

  • Weight: 6.2 lb (2817 g)

  • Power Source: 2x 12g CO2 cartridges

  • Action: Semi-auto and 6-shot burst

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 36 Rounds

  • FPS: up to 450

Categories: 4.5mm / .177 cal, .43 cal, 6mm, Airsoft, BB, Blowback, Break Barrel, CO2, Full Auto, Paintball, Pellet, Pistol, Review, Rifle, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, EMG, SAI 2011 DS 4.3, HK416, H&K 416, T4E PDP, Walther, Markpoint

Airgun Safety 101

No Comments

Airguns are not toys and as so require proper storage, transportation and handling so as not to cause an accident that could be minor or even deadly.

No matter if you are handling an Airgun or a “Real Gun”, they should both be handled in the same manner even if the consequences from an accident with an Airgun may be less serious. Life long injuries like the loss of an eye are nothing to be taken lightly.

For the most part, what I talk about in this Airgun Safety 101 video can also be applied to a “Real Gun” although most countries will have stricter laws and guidelines in the storage, transportation and handling of “Real Guns” over an Airgun.




Storing Your Airgun:

In Canada an unregulated Airgun does not have any real specific safe storage guidelines but common sense should be used and I recommend that you at the bare minimum keep your Airgun in some sort of locked space whether it be a safe, cabinet or room that is locked all of the time.

You can also put a trigger lock on your Airgun if you do not have a lockable storage location for it.

You should also make sure to store your Airgun unloaded, at least when it comes to BB’s and or Pellets. If there is some unused CO2 in it, or it is charged with Compressed Air, but unloaded in terms of ammunition, that is OK, but again keep it in a safe location away from anyone that may be able to get their hands on it and hurt themselves or others.




Transporting Your Airgun:

Again, in Canada an unregulated Airgun does not have any real transportation guidelines but if you keep your Airgun out in the open and someone sees it, they will most certainly call the police and more than likely you may find yourself staring down the wrong end of a police firearm, at least until they sort it all out. This is very serious as unfortunately people have died as a result of handling their Airguns out in the open and underestimating what kind of police response that may entail.

For that reason alone, always keep your Airgun out of sight in a case or backpack or the trunk of your car. Never transport your Airgun loaded and it is best if you can lock it in a case or put a trigger lock on it for added safety when transporting it.



Shooting Your Airgun:

Shooting your Airgun is always the most enjoyable part of owning an Airgun, so don’t do something stupid and turn that experience into a nightmare. Treat your Airgun as if it is deadly at all times, never point it at anything you do not intend on shooting.

Keep your safety on until you are ready to shoot. Never put your finger on the trigger until you are ready to shoot it and only shoot it in a safe location with an appropriate background and backstop.

Think of the barrel of your Airgun as a light saber that if it crosses even your arm, it could cut it off. Even a BB to the arm is a serious matter. I had a friend that shot himself in the arm with a BB Gun and the BB lodged in the tendons of his wrist requiring an operation to remove it. He was a violin player so this could have ended his violin playing, but luckily he was OK.

When Your finger is not on the trigger it should be held across the trigger guard in a straight position to ensure no accidental misfires.

Wear eye protection, Steel BB’s will bounce back when they hit a hard surface and can come back with enough force to injure an eye easily. Generally Airguns do not require ear protection but some can be loud enough that you may want to wear some sort of ear protection as a precaution.

Only shoot with others that are responsible and take Gun Safety very seriously. Young people will need constant supervision and it is best to go through all of this first before even considering handing them an Airgun for the first time. Perhaps start them off with something like an Airsoft gun which will have less consequences if an accident were to take place.

Airguns are awesome in so many ways and allow for a similar shooting experience to a “Real Gun”. They can be used in more situations, with less overall cost and are a great way to learn proper gun handling and how to improve your shooting ability even if you are a “Real Gun” owner. Always be responsible with your Airgun not only for yourself but for others as it only takes a few idiots to ruin things for the rest of us. Don’t be that Idiot please!

Categories: Airsoft, BB, Blank Gun, Gun Law, Gun Safety, How To, Pistol, Pellet, Paintball, Real Gun, Vimeo Video Tags:

Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle Table Top Review

No Comments

Type: AEG Airsoft Rifles
Manufacturer: Umarex.
Model: Elite Force M4 CFRX
Materials: Mostly plastic/some metal.
Weight: 5.2 pounds (2360 grams).
Total Length: 32.4-35.4 inches (820-900mm).
Barrel: 16.1 inch (410mm) barrel non-rifled.
Propulsion: AEG.
Action: Single action semi & full auto.
Ammunition Type: 6mm plastic Airsoft BB’s (Eye Trace compatible).
Ammunition Capacity: Mid/High cap 340 round magazine.
FPS: 370-400 fps.

Trigger Pull: The trigger pull on the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle is fairly short and light as it is basically a simple on and off switch as it is not mechanical but rather electrical. For this reason there is no real creep or feel of a release. When you get to a point in the trigger you close a circuit that activates the electric motor cycling the spring shooting in either semi or full auto depending on your selector switch position at the time.

Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle, I am planning to make a video for this rifle at the end of this week if all goes as planned. I do not have any of the “Eye Trace” Airsoft Ammo to show how this works and looks but I will be able to do my traditional accuracy and velocity testing here in the Replica Airguns Indoor Sea Can Airgun Range. When I do get access to some of the Eye Trace Airsoft Ammo I will make a short video most likely in a lower light situation to show how it looks.

Build Quality: The Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle does have a lot of plastic in the build including the upper and lower receiver, hand guard, rear stock, front and rear sights, grips and flash hider but as expected there are metal part where they are required as in the inner and outer barrel, magazine, buffer tube, trigger, selector switch, magazine release, charging handle, dust cover and of course many internal parts. It does have a decent weight to it being a fairly long AR and so it feels solid enough. I would have liked to have seen metal sights and perhaps a metal receiver since it is not a cheap or inexpensive AEG Airsoft Rifle.

Realism: The Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle is based on the M4/M16 platform of course in a modern version with all the tactical additions. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of it. The addition of the Tracer element will add to the realism when shooting it in low light situations, but so far I have not tested it as I do not have any Eye Trace Ammo on hand.

Pros:

  • Eye Trace System unique and great in low light situations.

  • Lots of accessory mounting options with Picatinny top rail and side adb bottom M-LOK.

  • Full adjustable Pop-up sights.

  • Pre-installed MOSFET for improved electronic performance.

  • Ver 2 Full Metal, fully upgradeable gearbox.

  • 6 position adjustable AR compatible type rear stock.

  • I like the two tone black and tan finish.

  • Has the Elite Force Branding from Umarex.

  • Easy to get at adjustable Hop-up.

Cons:

  • Plastic receiver and orange tip.

  • Battery options limited due nunchuck compatible space.

  • Pop-up removable sights are plastic.

Comments:

Umarex introduced the “Eye Trace” line of Airsoft Rifles at SHOT Show this year and I have been somewhat eagerly awaiting getting my hands on one to try this new system out, but unfortunately we do not have any of the Eye Trace Airsoft Ammo to do that with. I am not sure if Umarex is low on supply or perhaps it was missed in the order? Either way I will be testing out the new Eye Trace Airsoft Ammo when I get my hands on some. in the future. Just to be clear on how this works, the Eye Trace Ammo is florescent and these New Eye Trace Airsoft Rifles have a blue light you can turn on or off that activated the florescent Airsoft Rounds illuminating them to look like tracer rounds coming out of your barrel. The new Eye Trace Airsoft Rifles work just like a standard AEG Airsoft Rifle when using normal Airsoft BB’s, so I can test the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle as I always do so stay posted for my Official Field Test Shooting Video for it coming out very soon.

My Vimeo Table Top Review for the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle:

Categories: 6mm, AEG, Airsoft, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, Elite Force M4 CFRX

Full Auto Fun Summer 2024 Barra 400e Take 2

No Comments

Here is video four in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!

My Airguns of choice in this years Full Auto Fun Series are all 4.5mm BB Full Auto Airguns this time around. They are the Barra 400e 4.5mm BB AEG Full Auto BB Rifle, the KWA Mini UZI Blowback CO2 4.5mm BB Machine Gun and the the Crosman A4-P Blowback CO2 4.5mm BB Pistol.

In this fourth Full Auto Fun video, I retest the Barra 400e 4.5mm BB AEG Full Auto BB Rifle in full auto this time, and try a bit of a different camera angle approach with my HoverAir Drone Camera switching it to follow mode as it doesn’t stop recording so easily in this mode. And as expected, it worked a lot better for me with this setup and continued recording the entire video. I also recoded using my Meta Glasses to get the first person view and like the other videos I placed my Insta360 X4 camera on the barrel again to get some cool up front gun angle shots. I think this setup works well and will probably use it for future Full Auto Fun Videos where I am running around the yard shooting stuff. Maybe there will be a couple more bonus guns in this years Full Auto Fun Series? No promises!

Categories: 4.5mm / .177 cal, AEG, BB, Field Test, Full Auto, Full Auto Fun, Rifle, Semi Auto, Vimeo Video Tags: Barra 400e, Barra

Full Auto Fun Summer 2024 Barra 400e

No Comments

I try to make at least one series of Full Auto Fun video each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!

My Airguns of choice in this years Full Auto Fun Series are all 4.5mm BB Full Auto Airguns this time around. They are the Barra 400e 4.5mm BB AEG Full Auto BB Rifle, the KWA Mini UZI Blowback CO2 4.5mm BB Machine Gun and the the Crosman A4-P Blowback CO2 4.5mm BB Pistol.

In this first Full Auto Fun video I start with the Barra 400e 4.5mm BB AEG Full Auto BB Rifle, but in the all the camera and audio setup confusion, I forgot to put it in Full Auto (getting old), so this is really not a Full Auto Fun Video, it was still fun and I hope you enjoy it anyway. The other videos in this Full Auto Fun Series are for sure in Full Auto and I will be taking out the Barra 400e and give it another go in Full Auto this time so stay posted for the true Full Auto Fun Video for the Barra 400e shortly!

Categories: Full Auto Fun, Full Auto, BB, 4.5mm / .177 cal, AEG, CO2, Blowback, Field Test, Pistol, Rifle, Vimeo Video Tags: Barra, Barra 400e

Specna Arms Core SA-J73 AEG Airsoft Rifle Field Test Review

No Comments

In this Field Test Shooting Video, I test out the Specna Arms Core SA-J73 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to see what the velocity/fps is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I shoot in both semi and full auto at a paper target setup 30 feet down range. If you are more interested in information like details and specifications for the Specna Arms Core SA-J73 AEG Airsoft Rifle, then make sure to watch my Table Top Video I already made that also includes some nice close up video for you to check out…

First up I loaded up a mag of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph to get a baseline average. Specna Arms claims around 370-380 fps using the preinstalled internal spring setup. I averaged 382 fps with my slowest shot recording 379 fps and my fastest shot hitting 383 fps. All of them really close in terms of velocity and right on the mark of the claimed 370-380 fps using .20 gram Airsoft BB’s.

With the Velocity Test in the bag, I moved on to my Accuracy Test for the Specna Arms Core SA-J73 AEG Airsoft Rifle where I first shot 10 rounds in semi auto to see how tight of a grouping I could get, and then I also finished up the rest of the partially full magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto rocking around. For my 10 shot semi auto grouping I did get around a 1 to 1.5 inch spread, and notably all 10 shots hit the bullseye with no sight adjustments out of the box. Unleashing the Specna Arms Core SA-J73 in full auto, the group did spread out just a little bit to around 3 inches or so, but again right on top of the bullseye for the most part. Very impressive results for sure!

Overall I am super impressed with the Specna Arms Core SA-J73 AEG Airsoft Rifle! At around $200 Canadian you get a well made decent quality AEG Airsoft Rifle that not only looks and feels really good, but performs as good if not better than some much more expensive AEG Airsoft Rifles out there. All you really need to get on top of this purchase would be a decent charger and battery setup along with some quality Airsoft BB’s and then you are ready to go. No need for any more upgrades at least not right away. So if you are looking for an affordable AK type AEG Airsoft Rifle with no real compromises to speak of, look no further than the Specna Arms Core SA-J73 AEG Airsoft Rifle. Not much else will be a better option in this price range.

Categories: 6mm, AEG, Airsoft, Field Test, Full Auto, Rifle, Semi Auto, Vimeo Video Tags: Specna Arms, SA-J73, AK-47

Specna Arms Edge SA-X01 AEG Airsoft Rifle Field Test Review

No Comments

In this Field test Shooting Video, I test out the Specna Arms Edge SA-X01 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to find out what the velocity is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I also shoot in both semi and full auto at a paper target setup 30 feet away. If you are more interested in details and specifications for the Specna Arms Edge SA-X01 AEG Airsoft Rifle then make sure to watch my Table Top Video I have already made that also has some nice close up video for you to check out…

So first up I loaded up a mag full of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph. Specna Arms claims around 380 fps using the preinstalled spring setup, I averaged 348 with my slowest shot recording 344 fps and my fastest shot hitting 351 fps, so all of them pretty close in terms of velocity but a bit under the claimed 380 fps using .20 gram Airsoft BB’s

With the Velocity Test completed I moved on to my Accuracy Test for the Specna Arms Edge SA-X01 AEG Airsoft Rifle Field where I not only shot 10 rounds in semi auto to see how tight of a grouping I could get, I also finished up the 120 round magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto shake. For my 10 shot grouping I did get around a 2 inch spread, I did notice the Specna Arms Edge SA-X01 AEG Airsoft Rifle shot really low and a bit to the right out of the box. I would say about 8 inches low and 3-4 inches to the right. There is some sight adjustment you can do so you should be able to dial in the sights to your personal preference. When I switched over to full auto which is always more enjoyable with AEG Airsoft Rifles, the grouping did open up a bit but not a lot more, maybe as much as 4 inches but I did put close to 100 rounds additionally into the target.

Overall I am impressed with the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I would have liked to have seen it shoot a bit closer to the bullseye out of the box using the iron sights, but personally I would more than likely add a red dot sight anyway, and that will correct any sighting problems one may have with this Airlift Rifle. The FPS is I would say about perfect for most Airsoft shooting conditions and it can be used with the pre-installed spring either for CQB or out door games. I do like the 120 round magazines as there is no need to whined a spring half way through a magazine but you will need more magazines on hand or a good speed loader handy for an Airsoft Battle. Just keep in mind your battery options will be limited due to the battery area being rather small since this very compact AIrsoft Rifle does have limited space to put a battery.

Categories: 6mm, AEG, Airsoft, Field Test, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Specna Arms, SA-X01

Specna Arms Edge SA-X01 AEG Airsoft Rifle Table Top Review

No Comments

Type: AEG Airsoft Rifles
Manufacturer: Specna Arms.
Model: Edge SA-X01
Materials: Mostly metal/aluminum.
Weight: 5.52 pounds ( 2.50 kg).
Total Length: 23.5-27 inches (597-686mm).
Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled.
Propulsion: AEG.
Action: Single action semi & full auto.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: High cap 380 round magazines.
FPS: 380 fps with installed spring, included M90 spring will be lower fps.

Trigger Pull: The trigger pull on the Specna Arms Edge SA-X01 AEG Airsoft Rifle is fairly shot and light, it is basically a simple off off switch as it is not mechanical but rather electric. For this reason there is no real creep or feel of a release. When you get to a point in the trigger you close a circuit that activates the electors motor cycling the spring.

Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I am planning to make a video for this rifle next week if all goes well. I have reviewed other Specna Ames Core products in the past and made Field test Videos for them so perhaps check one of those videos out in the time being for a bit of a heads up of what you can expect from the Specna Arms Core SA-J73 AEG Airsoft Rifle.

Build Quality: Specna Arms Airsoft Rifles are made of good quality no matter if you go with the Core or Edge versions. You will still get a quality product with quality materials and metal parts where you need them. The Edge Series offers upgrades like more metal parts, improved gearboxes and electronics along with additional accessories but you pay a bit rmeo for the added quality and add ons.

Realism: The Specna Arms Edge SA-X01 AEG Airsoft Rifle is based on the AR15 or M16 platform of course in a very modern compact PDW styled. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of your Specna Arms Rifle.

Pros:

  • Very high quality product with quality components throughout (Already listed in Specifications).

  • 4 positions rear stock.

  • ESA™ quick spring change system makes spring changes quick and easy.

  • Comes with two springs for potential indoor and outdoor usage.

  • Almost all metal build.

  • Removable fully adjustable pop-up sights.

  • No orange tips on our Canada Store versions.

  • Lots of rial mounting options using M-LOK System..

  • Comes with a fore grip and deans connector and two magazines.

  • Easy access to motor for any possible trouble shooting you any need to do.

  • I love the compact size. perfect for close closer quarters situations.

Cons:

  • Much higher cost than Core Series.

  • Magazine capacity is low but comes with two magazine.

  • You will need a very specific compact battery setup for this Specna Arms model.

Comments:

I for sure like the look of the Specna Arms Edge SA-X01 AEG Airsoft Rifle, but more than that you get a really great Compact PDW Airsoft Rifle at a reasonable price with a ton of quality components and a mostly all metal build. Specna Arms even includes an additional magazine in the box. You could go with one of their Core series of Airsoft Rifles in a similar PDW and save a bit of money but if you can afford the upgrade then I would go for this version as you will not need to upgrade it in the future and that alone will save you some money over time. I would suggest adding a couple Lipo batters and a good charger to your shopping cart and maybe even an couple more magazines.

My Vimeo Table Top Review for the Specna Arms Edge SA-X01 AEG Airsoft Rifle:

Categories: 6mm, Airsoft, Full Auto, Review, AEG, Vimeo Video, Semi Auto, Rifle Tags: Specna Arms, SA-X01, AR15

Specna Arms Core SA-J73 AEG Airsoft Rifle Table Top Review

No Comments

Type: AEG Airsoft Rifles
Manufacturer: Specna Arms.
Model: Core SA-J73
Materials: Fiberglass reenforced plastic and metal/aluminum.
Weight: 5.7 pounds (2.59 kg).
Total Length: 23.4 - 32.6 inches (594 - 828mm).
Barrel: 15.7 inch (399mm) inner 6.03mm tight bore barrel non-rifled.
Propulsion: AEG.
Action: Single action semi & full auto.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: High cap 430 round magazine.
FPS: 370-380 fps with installed spring, included M90 spring will be lower fps.

Trigger Pull: The trigger pull on the Specna Arms Core SA-J73 AEG Airsoft Rifle is similar to a light single action trigger as essentially the trigger is non-mechanical, but rather it is more like an electrical on off switch. There is a little bit of take up with virtually no extra friction to let you know when the release is, with a bit of use you will figure out exactly when the trigger will release the action.

Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Core SA-J73 AEG Airsoft Rifle, I am planning to make this video for next week if all goes well. I have reviewed other Specna Ames Core products in the past and made Field test Videos for them so perhaps check one of those videos out in the time being for a bit of a heads up of what you can expect from the Specna Arms Core SA-J73 AEG Airsoft Rifle.

Build Quality: One thing I can say, is no matter if you get the Core or Edge version of the Specna Arms AEG Air Rifles, you are getting extremely good value for your money, and neither one is going to have any low quality parts in it. Even the lower cost Core Series will have fiber glass reenforced plastic and metal parts along with a metal gearbox and virtually almost the same build as the more premium and higher priced Edge Series. You will get upgrades in the Edge Series like an aluminum receiver and buffer tube, a GATE X-ASR Mosfet, upgraded Gearboes, and an additional magazine.

Realism: The Specna Arms Core SA-J73 AEG Airsoft Rifle is based on the AK platform with a bit of a more modern look to it which includes a synthetic folding stock, a sight mounting system and a more modern magazine design. The Specna Arms Core SA-J73 AEG has lots of metal parts in it and has a good overall weight and feel to it which make is not too heavy or too light in my opinion. Our Canada version even come with a black flash hider rather than orange one which helps with realism.

Pros:

  • Very affordable price ($200 at time of video), yet very high quality product for what you pay.

  • Quality components throughout both the Core and Edge series.

  • Precision barrel internal 6.03mm diameter.

  • ESA™ quick spring change system makes spring changes quick and easy.

  • Comes with two springs for potential indoor and outdoor usage.

  • Plastic parts are fiberglass reenforced making them very durable.

  • Rear sight is adjustable on the fly for elevation.

  • No orange tips on our Canada Store versions.

  • Side mounting option for an optical or red dot sight system.

  • Metal V3 Gearboxes with metal gears and mostly all metal parts inside.

  • Decent amount of space for a battery.

  • Weight is about perfect, may actually too heavy with metal receiver?

Cons:

  • Plastic receiver.

  • Need to remove dust cover and use a screwdriver to adjust the hop-up.

  • No battery or charger included.

Comments:

The Specna Arms Core SA-J73 AEG Airsoft Rifle for right around $200 is not what I would expect for such a lower priced more entry level Airsoft Rifle. The build quality and components in this Airsoft Rifle are not budget by any means and when you hold it, it feels like a very high quality product. Sure you don’t get a battery or charger with it which you often find bundled with lower cost Airsoft Rifles, but generally these batteries and chargers are extremely entry level and will require upgrading almost immediately. So do yourself a favor and invest in a good battery setup if you do not already have one. If you’re in the market for an AK based AEG Airsoft Rifle and have a limited budget but still want a decent product, then I would recommend the Specna Arms Core SA-J73 AEG Airsoft Rifle for sure.

My Vimeo Table Top Review for the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle:

Categories: 6mm, AEG, Airsoft, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Specna Arms, SA-J73

Replica Airguns June Mystery Box Unboxing

No Comments

Another box showed up at my door and this time I had no idea what was inside it, I asked the boys in the warehouse to surprise me and send some new product as I was low on review items, and in a couple of days later this tall somewhat large box showed up. In this Replica Airguns June Mystery Box Unboxing Video I open the box and take a look at what’s inside. I recommend you just watch the video and enjoy the suspense with me, but if you want to cheat and find out now, then look below at quick breakdown of each item…

Centerpoint Hornet - Recurve Compact Crossbow

  • Arrow Velocity: Up to 191 FPS

  • Foot Pounds of Energy (FPE): 12 ft-lbs

  • Limbs: 1 Piece Compression Fiberglass

  • System: Recurve

  • Draw Weight: 80 lbs

  • Length: 22.05 in

  • Product Weight: 2.32 lbs

  • Stock Material: Composite

John Wayne Marshal CO2 BB Revolver

  • Type: BB Revolver

  • Power Source: 12g CO2 x 1

  • Action: Single-action

  • Ammo Type: 4.5mm (.177) steel BBs

  • Ammo Capacity: 18 rounds

  • FPS: 330

  • Safety: Manual

Gamo GP-20 Combat CO2 BB Pistol

  • Ammunition: .177 Bb's.

  • Velocity: 400 Feet Per Second (Fps)

  • Action: Single / Double

  • Magazine: 20 Metal BB's Magazine.

  • Powerplant: CO2 12gr.

  • Barrel: Smooth Bore Barrel.

  • Slide: Non-blowback.

  • Sights: Fixed Sights With Fiber Optic Rear Sight.

  • Weight: 0.97 Lbs.

Specna Arms SA-X01 AEG Airsoft Rifle

  • AEG Airsoft

  • Overall length: 69 cm.

  • Weight: 2505g.

  • FPS: 380.

  • Hop-up: Yes.

  • Inner barrel length: 229 mm.

  • Magazine capacity: 120 rds.

  • Quick spring change system: Yes.

Specna Arms SA-J73 AK AEG Airsoft Rifle

  • Weight: 5.7 lbs

  • Overall Length: Adjustable from 23.4" to 32.6"

  • AEG Airsoft

  • FPS: 380.

  • Hop-up: Yes.

  • Inner barrel length: 400 mm.

  • Magazine capacity: 430 rds.

  • FPS (Feet Per Second): 370-380 FPS

  • Included Magazine Capacity: 500rd Hi-Cap Magazine

  • Quick spring change system: Yes.

  • Gearbox Version: V3 Gearbox

Categories: 4.5mm / .177 cal, 6mm, Airsoft, AEG, BB, CO2, Crossbow, Full Auto, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video Tags: Bara, Gamo, Specna Arms, Center Point, Hornet, GP-20, SA-J73, SA-X01, John Wayne Marshal, AirVenturi

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle FIeld Test Review

No Comments

What you can expect from this Field test Shooting Video for the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle are two things for sure. I test out the velocity with both 4.5mm Steel BB’s and .177 caliber lead pellets, I also chuck both of these rounds downrange to see if one may be more accurate than the other and how close I can get a 5 shot grouping for each ammunition type. If you are looking for details and specifications and perhaps some more close up video of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle then you may want to watch my Table Top Video for it here.

If you have watched any of my hundreds of Field Test Videos, then you already know I start off shooting 5 or so rounds through my Chronograph to see what the average velocity is going to be. In this Field Test I shoot 3 rounds of each ammo type, 3 BB’s and 3 pellets since it is a pump Airgun and they tend to be more consistent than a CO2 Airgun. Barra claims around 350 fps, I am not sure if this is for BB’s or Pellets or both? As it turns out (spoiler alert), both ammo types performed about the same in both the velocity and accuracy portion of my testing. For BB’s, my chronograph testing got 303, 316 and 316 for an average of 312 fps. For pellets my chronograph results were 309, 309, 314 for an average of 311, so only 1 fps off between the two. Keep in mind the BB’s weigh around 5.1 grain while the pellets I was using were around 7 grain, so the pellets will be carrying more energy downrange and hit a bit harder. By the way they are also harder to load so I would suggest just shooting the steel BB’s in this one since you can keep the fun times flowing better...

Next up for my accuracy test of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, I again shot both ammo types, but 5 rounds of each and just like the velocity test they matched each other almost exactly. Both the steel BB’s and lead pellets I was using shot really well centered left to right, maybe just a hair to the left and both shot just about an inch or so high on the bullseye I was aiming at 30 feet away. The 5 BB’s grouped nicely for me at about an inch while the pellets did get a slightly tighter 3/4 inch grouping for me in this test. I was using a semi rested shooting position sitting on a stool in the back with the rifle rested on a sand bag up front.

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle.

Categories: 4.5mm / .177 cal, BB, Field Test, Multi-pump, Pellet, Review, Rifle, Single Shot, Vimeo Video Tags: Barra, Barra 1866

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle Table Top Review

No Comments

Type: Lever/Pump Dual Ammo Rifle
Manufacturer: Distributed by Barra.
Model: Junior Dual Ammo Pump Cowboy Rifle.
Materials: Mostly plastic, some metal.
Weight: 4.1 pounds (1859 grams).
Total Length: 36 inches (91.44mm).
Barrel: 18 inches (45.7cm) metal rifled.
Propulsion: Pump Compressed Air.
Action: Lever/Pump
Ammunition Type: .4.5mm steel BB’s & .177 Caliber Pellets.
Ammunition Capacity: 50 BB’s in hopper, single shot Pellets.
FPS: Claimed 350-400.

Trigger Pull: The trigger pull on Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is respectable at about 5 pounds with a medium to short pull length. I would say it is perfect for novice shooters as it is not overly light so as not to go off easily by accident and not too heavy for youth shooters with less finger strength than adults. When you pull the bolt back to reload the ammo, the internal cocking mechanism is activated allowing for single action type shooting. You do need to activate the bolt with each shot.

Accuracy: My dedicated field test shooting video is planned for this week, so for now I have no idea what to expect in terms of velocity and accuracy from the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, other than it is claimed to shoot around 350 fps when using pellets. It does have an 18 inch rifles barrel which should contribute to helping a lot with accuracy, so I do have high expectations especially since it has a pretty good trigger and when looking down the sights they allow for a nice tight fix on the target. The rear stock is short but not so short that it feels cramped for an adult shooter which should also help when I perform my accuracy test.

Build Quality: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is nothing special when it comes to materials being used in it. It is for the most plastic with the exception of the inner and outer barrel along with the rear sight and I would imagine some other internal parts. It does feel not so bad as it is a bit over 4 pounds and is smaller in nature so it feels solid enough in the hand. I wish the Pump/Lever was metal as it would of felt a bit more solid and would have added a bit more additional weight to the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle. Fit and finish is good and overall the gun looks and feels good.

Realism: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything we would expect other than loading shells which is available in other Lever Action Air Rifles if you don’t mind paying a premium for one. The lever is actually not a lever but more of a pump so the action and look of the lever is not exactly as you would expect from a true lever action rifle, but when it is locked in place it does look the part. The gold receiver and rifle band looks sharp and I feel matches up with the dark imitation wood stock nicely. One point to make is that the hammer is not the hammer but actually the safety and the bolt not only opens the breach area but also acts as the cocking mechanism for the internal hammer.

Pros:

  • Super easy to pump.

  • Fit and finish looks decent for a mostly plastic airgun.

  • In terms of realism it does look like a more compact lever action rifle for the most part

  • Can shoot either BB’s or Pellets.

  • Holds 50 BB’s in the hoper for quicker follow up shooting.

  • Metal octagon outer barrel adds addition weight to a mostly plastic gun.

  • Rear sight is metal and is also adjustable for elevation.

  • Trigger pull is pretty decent, not too light but is short and about 5 pounds.

  • Recessed barrel for added realism.

  • Made for kids but the shoulder pull length and sight placement works for adults too.

  • The gold receiver looks good and gives it a unique look.

Cons:

  • Mostly plastic build.

  • Manual says only one pump but I wonder why this is the case or perhaps just to deregulate it?

  • Pellets are hard to load especially if you have larger hands and fingers.

Comments:

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is a competitor for products like the Red Ryder but it has a bit more realism in terms of looking more like a replica of a real steel Lever Action Cowboy Rifle. It also allows for shooting pellets and has an actual rifled barrel so hopefully this helps with accuracy. You can still kind of shoot it Lever Action Style when shooting BB’s but there is the addition of charging the bolt with each shot over and above working the Lever / Pump, so it will take a bit more time to get those follow up shots as compared to a Red Ryder BB Rifle. One other point to make is that the lever is actually not a lever but more of a pump since this is not spring powered but instead has an air reservoir which on this version only allows for one pump, but on the non-junior version you can pump it up to 10 times and get a claimed 800 fps out of it (US Version). I am going to try pumpkin the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle up to three times to see if there is any difference in power but this could void your warranty if you damage the air reservoir by over pressuring it. So be good and only pump yours once as instructed in the manual.

Categories: 4.5mm / .177 cal, BB, Pellet, Review, Rifle, Single Shot, Vimeo Video, Multi-pump Tags: Barra, Barra 1866

Cybergun Thompson 1911 CO2 NBB Pellet Pistol Field Test

No Comments

In this shooting velocity and accuracy Field Test Video of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to” test out what the velocity in fps using a standard 12 gram CO2 along with 7 grain .177 caliber lead pellets shooting 5 rounds through my Chronograph. The claimed fps for this pellet shooter is 332, not sure if that is with lead or alloy pellets? I then setup a fresh paper target 30 feet down range here in the Sea Can and shoot 6 rounds into it using a semi rested shooting position to find out if the Cybergun Thompson 1911 CO2 NBB Pellet Pistol can get all 6 rounds out the barrel and if it can place them any where near the bullseye out of the box. And if it can also get a decently tight grouping. If you have not already watched my Table Top Video Review for the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, then make sure to check that one out for details, specifications and some nice close up 4k video. It is a pretty sweet looking Airgun!

First, my velocity test of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to shoot” 6 rounds through my Chronograph and then averaged them all out as I do in all my Field Test Shooting Videos. I did not have a lot of success with my first choice of pellets and pretty much got a jam right away. I then switched up the pellets and I was able to get 5 out of the 6 rounds in the one side of the rotary mag through my Chronograph and here where the results… The slowest shot was 206 fps while the fastest shot hit 251 fps, this averaged 231 fps which was kind of far off of the claimed 332 fps. Maybe the claim is for light weight alloy pellets? I don’t know? To be honest I was just glad to get a result as I was not having a lot of luck with the rotary magazine working for me all that well.

I then tried my luck again and placed a fresh paper target 30 feet downrange and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back). Luck was on my side as a succeeded to place all 6 rounds into the target with no jams this time! The Cybergun Thompson 1911 CO2 NBB Pellet Pistol did alright in terms of accuracy placing 4 shots all within about an inch and a half well centered just a bit high of the bullseye. Two shots did drop down as they seemed to come out underpowered compared to the other 4 shots which does explain why they dropped a bit on the target. This did stretch out the grouping to closer to around 4.5 inches.

Rotary pellet magazines are for sure never as consistent as vertical stick type magazines shooting round BB’s. There is always going to be some jamming that happens especially if the pellets you pick do not fit perfectly. Once I found a pellet the Cybergun Thompson 1911 CO2 NBB Pellet Pistol liked a bit more, I did have better success with only the occasional jam. Power was not great as you saw with my velocity test. Accuracy was for sure much better and if the velocity was more consistent then I am positive 1.5 to 2 inch groupings would be possible! The trigger is OK but loaded up with pellets does tend to drag a bit more than when empty and make you work a bit harder with that trigger finger, but it does get the job done. The best part about the Cybergun Thompson 1911 CO2 NBB Pellet Pistol would be its looks and how it feels in the hand for sure, the stainless finishes gives it a quality look so if looks are more important than performance and you want a sweet looking stainless 1911, this may be your pick.

Categories: 4.5mm / .177 cal, CO2, Field Test, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Cybergun, M1911, Thompson Custom 1911

Cybergun Thompson 1911 CO2 NBB Pellet Pistol Table Top Review

No Comments

Type: Non-blowback CO2 Pellet Pistol.
Manufacturer: Distributed by Cybergun.
Model: Thompson 1911
Materials: Metal and plastic.
Weight: 2.18 pounds (990 grams).
Total Length: 8.66 inches (220mm).
Barrel: 4.75 inches (121mm) metal rifled.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback, DOA trigger.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 12 (6x2) round drop out metal magazine.
FPS: Claimed 332.

Trigger Pull: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol is typical of a double action trigger in that it is a longer trigger pull that requires more effort to pull than a single action trigger would. The Cybergun Thompson 1911 CO2 NBB Pellet Pistol trigger is good for a DOA trigger as it is not overly heavy and does allow for somewhat quick follow up shooting. The trigger pull not only cocks the hammer, it also rotates the rotary magazine on either end of the stick magazine so there is a lot going on here but it still is not overly heavy which is nice.

Accuracy: I have yet to shoot the Cybergun Thompson 1911 CO2 NBB Pellet Pistol or performed my standard Field Test shooting Video so I can not comment at this time on the performance other than what is claimed in terms of fps (332). In terms of accuracy I am hoping it will perform well being not only a pellet pistol but since it also has a rifled steel barrel this may help with accuracy. We will find out shortly when I make my Field Test Shooting video of this CO2 Pellet Pistol.

Build Quality: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol has a mix of metal and plastic parts with the slide and magazine being the main metal parts and the frame along with most of the controls like the trigger, slide catch release, hammer and safety all being made out of plastic. Of course many of the internal parts like the barrel will be metal or even steel. Overall the Cybergun Thompson 1911 CO2 NBB Pellet Pistol feels solid and has a good weight up and over 2 pounds. Fit and finishes are also good but I would have liked to have seen the trigger, hammer, slide catch and safety being made out metal, as it just would have felt better to the touch. Yes I can feel the difference!

Realism: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol looks pretty much bang on to a Colt 1911, really the big tell would be the trigger as it is much larger than a standard 1911 to accommodate the double action trigger pull length but other than that, this CO2 Pellet Replica Pistol does a good job of replicating the real steel version. It is even similar in weight and feel. The recessed barrel, full size drop out magazine, and I think the detail of the stainless finish on the slide all add to the realism.

Pros:

  • Double action trigger is not that bad, fairly light and smooth.

  • Fit and finish looks good, just wish the trigger, hammer and safety where also metal.

  • This pistol has a good weight at a little over 2 pounds!

  • Decently looking replica of the real steel colt 45 1911.

  • Has a rifled metal barrel which may help with accuracy..

  • White dot sights front and back helps with quick targets acquisition.

  • I like the stainless steel slide, it gives the gun a quality look.

  • Recessed barrel for added realism.

  • Full size metal magazine holds the CO2 and Pellets and adds additional weight.

  • Thompson Licensing looks good on this gun, not too much.

Cons:

  • Trigger, hammer and safety should have been made out of metal.

  • Hammer is non functioning.

  • No blowback and no sight adjustments.

Comments:

The best feature of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol is the stainless steel slide finish which really gives it a quality look and makes it even more believable. What takes away from the believability are the plastic parts and the lack of blowback operation or even a working slide. That said the Cybergun Thompson 1911 CO2 NBB Pellet Pistol offers a rifled steel barrel combined with shooting pellets which should make this a more accurate option over perhaps a Blowback CO2 BB 1911. I will have to test this out shortly to know for sure but if accuracy is more important than realism, than the Cybergun Thompson 1911 CO2 NBB Pellet Pistol may be your better option.

Categories: 4.5mm / .177 cal, CO2, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Thompson Custom 1911, M1911

Crosman Remington 1875 CO2 Dual Ammo Revolver Field Test Review

No Comments

I have reviewed many of the Shell Loading Revolvers in the past and I always enjoy shooting them anytime one shows up on my desk for review. So here I go again but this time with a product from Crosman but with the Remington License on it. As always, I test out the power using my Chronograph by shooting several rounds through it and averaging them out. I also setup a paper target 30 feet down range and generally put an entire cylinder or mag into it or 10 rounds depending on the capacity of the magazine or cylinder. In this Field test Shooting Video I did all of that but times two as the Crosman Remington 1875 CO2 Dual Ammo Revolver shoots both 4.5mm Steel BB’s and .177 Caliber lead pellets. If you are more interested in details and specifications along with more close up video of this item then watch my Crosman Remington 1875 CO2 Dual Ammo Revolver Table Top Review.

Starting with the velocity, or power for the Crosman Remington 1875 CO2 Dual Ammo Revolver, I measured using my Chronograph using a brand new 12 gram CO2 and I shot three rounds of BB’s and four rounds of pellets and averaged them out. Here are my BB Chronograph results in FPS: 423, 407, 398 (409 average). Here are my pellet Chronograph results in FPS: 300, 274, 270, 271 (279 average). I was using standard lead pellets which should be right around 7 grain while my 4.5mm Steel BB’s were around 5 grain. Temperature was average room temperature I would say.

For my Accuracy test I shot a full 6 round magazine of each ammo type or at least I tried to, but for some reason I was missing a round in my pellet test so I only shot five rounds for that one. For BB’s all shots were fairly well centered on the target but they did spread out to about 2.5 inches. Pellets dropped a bit perhaps as they were moving a lot slower? My pellet result was about the same at around 2.5 inches of spread between all 5 shots. The spread with the pellets was wider compared to the spread of the BB’s which was more vertical.

I have gotten more accurate results with other shell loading revolvers build in a similar fashion as the Crosman Remington 1875 CO2 Dual Ammo Revolver so I was expecting a little bit better results, but it could have been me that was the problem on this day? Still a close to two inch shot group at 30 feet away will generally nock pop cams over or other similar sized targets and this CO2 Revolver is really only meant for plinking fun and not so much match grade shooting. The Crosman Remington 1875 CO2 Dual Ammo Revolver is a real looker at the end of the day and if your want a single action only classic Western Revolver than look no further.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pellet, Pistol, Review, Revolver, Vimeo Video Tags: Crosman, Remington 1875