Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:M9A1 TBC. Materials: Mostly all Metal. Weight: 2.1 pounds (926 grams). Total Length: 9.25 inches (23.5cm) Barrel: 4 inches (10.2cm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is single and double action. When the hammer is back and it is in singe action, the trigger is short and light with about a quarter inch take-up before the release which is crisp and fairly light. You can decock the hammer and shoot in double action which does make the trigger pull much longer and a bit heavier but it is still very usable. There is also a semi cock-option where the hammer is partially cocked. This keeps the hammer off the firing pin and allows for a safer double action trigger pull.
Accuracy: So far I have not shot the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol or made my Field Test Shooting Video. I have shot lots of KJWorks Full Blowback Airsoft Pistols in the past and they have in general performed as expected. So I am confident when I get to the Field Test Shooting Video for the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it should perform well for me!
Build Quality: The KJWorks line of Airsoft Guns are known for their excellent build quality, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is another example of a well made Airsoft Pistol with lots of metal parts including the slide, frame, inner and outer barrel, magazine, trigger, safety, slide catch release, take down lever and magazine release. The only real plastic I can see is the grips, butt plate, and CO2 gas nozzle. Fit and finish is really good. There is just a little bit of slide wiggle, but all the mechanical parts work well.
Realism: Most Full Blowback Airsoft Pistols are built to be as close to a real steel pistol as possible with similar dimensions, weight and feel. The blowback action gives a Blowback Airsoft Pistol the required slide action to allow for chambering of an Airsoft BB along with the reseting of the hammer, so true single action shooting is possible. Other than shooting a real steel Beretta M9A1, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is as close as you can get to it. Holding this pistol in your hand, it would be hard to tell it is not the real deal.
Pros:
Pretty much all metal pistols with good weight to it.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
Comes with threaded outer barrel for adding a compensator or mock suppressor.
Comes with barrel extension for higher velocity shooting.
Easy to add accessories to under barrel picatinny rail.
White dot sights front and back.
Ambidextrous safeties.
Two toned tan and black finish looks good.
Field strip-able.
Cons:
Sight are non-adjustable.
Grips may be a bit wide for some small handed people.
Extended magazine makes it a bit bulkier.
You need an Allan key to adjust the Hop-up.
Comments:
The Beretta M9 is a classic Semi Auto Pistol that has been used in military and police for decades and has proven itself over time. I would say it is right up there with the classic 1911 as being recognized as a dependable and solid semi auto pistol. I still kind of prefer the 1911 but I’d take a Beretta M9A1 any day of the week. You really can’t go too wrong with the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it has it all… Almost all metal build, full blowback operation with both single and double action shooting options. You have a picatinny rail for adding accessories and easy to see white dot sights front and back. This is probably one of my favorite Beretta M9’s in terms of looks and features.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-19. Materials: Mostly all Metal. Weight: 1.9 pounds (850 grams). Total Length: 10.6 inches (270mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 25 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-19 CO2 Blowback Airsoft Pistol is excellent, it is super short and light as you would expect from a 1911 trigger, the makeup is almost non-existent with a super light release. Out of the box I find it perfect but you have the option of adjusting it with the supplied Allen key since it has competition adjustably. Like I said, out of the box it felt perfect to me so there is no real need to mess around with it.
Accuracy: At this point I have not shot the KJWorks KP-19 CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have shot my fair share of KJWorks Full Blowback Airsoft Pistols and they have in general performed very well for me, so I am confident when I get to the Field Test Shooting Video for the KJWorks KP-19 CO2 Blowback Airsoft Pistol it will do a great job!
Build Quality: The KJWorks line of Airsoft Guns is known for their excellent build and overall quality and the KJWorks KP-19 CO2 Blowback Airsoft Pistol is no exception. You will find all metal for the most part including some CNC Aluminum parts like the barrel and compensator, the slide and frame are metal along with the magazine and most of the controls. The pistol grip and trigger guard is all in one and the main plastic you will find on the KJWorks KP-19 CO2 Blowback Airsoft Pistol. Weight, feel and balance is really good.
Realism: The KJWorks KP-19 CO2 Blowback Airsoft Pistol is a double stack modern tactical 1911 in design. All of the controls and the overall design are that of a 1911 and so if you are use to shooting 1911’s, then you will be accustomed to this Airsoft Pistol. The full length blowback simulates the shooting experience along with some recoil feel and also allows for that true single action only trigger we are use to with 1911’s with its short and super light trigger pull. The KJWorks KP-19 CO2 Blowback Airsoft Pistol is fully field strippable which allows for easy to get to hop-up adjustments. I did notice that the Back-strap safety is non-functioning and just there for show, I am not sure why they did not make it a working safety?
Pros:
Lots of metal parts with good weight to it at nearly 2 pounds.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full-size drop out magazine that holds 25 rounds.
Picatinny rail underneath for adding accessories.
Adaptor plate for adding a red dot to the rear of the slide.
I like the green dot fiber optic sights, super easy to see on all backgrounds.
I like the two tone CNC aluminum barrel finish you can also see through the slide cutouts.
Super short and light skeletonized adjustable trigger looks and feels great.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Grips are wide, may not fit the hands of small shooters.
Not all controls are ambidextrous.
Rear sight is not adjustable.
Back-strap safety is non-functioning.
Comments:
I’ve mentioned in many of my videos how I really like 1911 styled pistols and of course ones with full blowback operation, so the KJWorks KP-19 CO2 Blowback Airsoft Pistol for me is a winner even before I even try it. Of course how it performs is going to be the real deciding factor, even if I am rooting for it. What is not to like though? It is almost all metal, has full blowback operation, easy to see fiver optic sights front and back, the ability to add a laser or tac light up front with a red dot on the back by installing the adaptor plate so you can really dress this one up and make it your own at the end of the day.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-13 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 8.25 inches (210mm) Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is what you would expect from a true Single Action Only Trigger, which is nice and light and relatively short. There is some initial take up but you can feel the point near the back where the release kicks in which is extremely light and predictable with no play in it. Of course you will have to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the slide cycling for you.
Accuracy: At this point I have not shot the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have already made a full Field Test and Shooting Video of the non-TBC version which is virtually the same Airsoft Pistol but without the threaded outer barrel extension. You can watch that Filed Test Video here where I get around 350 average fps and close to a 2 inch grouping shooting at a paper target setup 30 feet down range. Stay posted for my Full Field Test Shooting Video for the TBC version down the road.
Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so I expect the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol to be just the same. From my testing with the non TBC version and my initial first impressions, everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.
Realism: The KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but you could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 TBC CO2 Blowback Airsoft Pistol so it should not set off any red flags over at Glock. It’s good that there are various color options, tan, grey and black. It does seem that only the Tan and Grey two tone versions are available in the TBC version while the black version we seem to have available in the all black non-TBC version.
Pros:
Metal and Polymer with decent weight and good feel to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the CO2 and 22 rounds.
Well hidden safety incorporated into the serial number under the barrel.
Working trigger safety.
Super easy to see in all conditions fiber optic sight up front.
All working components like the real steel Glock styled pistol.
Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.
Comes with barrel extension for higher velocity shooting.
Would make a good training weapon if you are use to using Glocks
Comes in Tan and Grey two tone options also.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Sights are not adjustable.
Would have liked the addition of white dots or outline on the rear sight.
Slide spring could be slightly heavier.
Comments:
Let’s be clear, the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not a Glock Replica. It is different in many ways, the idea here is that it is close enough to be a good alternative if you are use to shooting Glocks and want something to train with that looks, feels and functions a lot like a traditional Glock. I am hoping the TBC version performs as well as the non-TBC version shot for me when I made my original Field Test Shooting Video back in 2023. For me the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol checks all the boxes… Full blowback operation, a very good trigger, lots of realism and I am sure good performance based on my past review.
Type:Airsoft GBB Rifle. Manufacturer: Novritsch. Model: SSQ22. Materials: Metal and plastic. Weight: 4 pounds (1.8 kg). Total Length: 32.7 inches (83cm). Barrel Length: 14.6 inches (37cm). Barrel: Metal non-rifled. Propulsion: Green gas. Action: Semi auto single action only trigger. Hop-up: Adjustable top mount hop-up. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 36 round full size drop out plastic/metal magazine. FPS: 400+.
Trigger Pull: The Single Action Only trigger pull on the Novritsch SSQ22 GBB Airsoft Rifle is a lot like what you would find on a real steel Ruger 10/22. It is short and light in action making it light and quick enough for action shooting or sniping with accuracy from long range. You will have to work the bolt to load an Airsoft BB in to the breach and ready the single action trigger for the first shot, but then the blowback action will do that for you for the rest of the shots.
Accuracy: I have not shot the Novritsch SSQ22 GBB Airsoft Rifle or tested it out so far, so I don’t really have much to say in terms of accuracy or if it is close to the claimed 400+ fps, but I will be making a full dedicated Field Test Shooting Video for it a bit down the road when I get caught up with my Field Test Shooting Videos. So until then we will have to wait and see,
Build Quality: Novritsch is a new product line for me so I have not had much hands on with any of their guns so far. My first impressions are that they make very good quality Airsoft products using high quality materials with well thought out designs. The Novritsch SSQ22 GBB Airsoft Rifle is not super heavy even though it does incorporate a fair amount of metal components including CNC machined aluminum.
Realism: The Novritsch SSQ22 GBB Airsoft Rifle is not an exact copy or Replica of a Ruger 10/22 22LR Rifle but it does share a lot of its design and mechanical functions. Most people when they buy a base Ruger 10/22 generally do a lot of upgrading and modifications to them that ultimately make it look a lot more like the Novritsch SSQ22 GBB Airsoft Rifle at the end of the day. As it is Gas Blowback it functions very similar to the real steel version with working blowback action which does give a bit of recoil to it and allows for a very nice short and light single action trigger.
Pros:
Mostly all metal design.
Gas-efficient nozzle assembly, CNC machined Hop-Up chamber, and Maple Leaf 60° bucking with a large nub surface.
Easy to access and adjustable hop-up, up to 0.46g BBs out of the box.
Multiple M-LOK Mounting Options (Sides and bottom).
Three preinstalled QD Sling mounts on each side.
Front groove similar to gas pistol mags. You can see how many BBs are left in your magazine.
Skeletonized stock with a rubber pad that is attached to a Picatinny rail.
Nice GBB recoil with each shot.
Compact and light weight, easy to carry on the filed.
Ruger 10/22 owners will be use to this design.
Cons:
Does not come with any sights, will need to add one.
Only shoots in semi auto to conserve ammo.
Has preinstalled orange tip but can be removed.
Comments:
I am always a sucker for Gas Blowback Airguns in general and with Airsoft Rifles the vast majority tend to be AEG’s, so when I get the chance to review a GBB Airsoft rifle, I am always a bit excited to do so. The Novritsch SSQ22 GBB Airsoft Rifle has a lot going for it, there are lots of metal parts where you want them to be, a great single action trigger, mounting options for a red dot or optical sight along with M-LOK on the sides and bottom for whatever accessories you plan to add to it. It’s nice that it starts out pretty light as the addition of a scope, perhaps a foregrip, maybe a taclight and or laser will bring up the weight. I most certainly am looking forward to the Field Test Shooting Video so I can see how this one performs.
In this months Replica Airguns Mystery Unboxing Preview Video, I take a look at 4 new items that showed up at my door. Two Airsoft Rifles, one being AEG and the other one a GBB. I also received two accessories for the GEM Alias super tiny multi ammo CO2 Pistol, A .50 caliber Paintball Barrel for it and and a 12 gram CO2 Adapter.
Both Airsoft Rifles are new to me from a company called Novritsch which is a higher end brand so the pricing is not cheap for either Airsoft Rifle. It was nice to get an AEG and GBB to review, the Novritsch SSR77 AEG Airsoft Rifle is a Replica of the Steyr AUG while the Novritsch SSQ22 GBB Airsoft Rifle is essentially a custom modded Ruger 10/22 copy, at least from what I can tell, it is solid and really well built.
I have already made a Table Top Video for the GEM Alias CO2 Pistol but I have been waiting for the .50 Caliber Paintball Barrel to show up so I can test out all 4 barrel ammo options. I also really wanted the 12 gram CO2 Adapter so I don’t have to use the small 8 gram CO2’s which are harder to find and not as cost effective as the 12 gram CO2. So now I am totally ready to make the GEM Field Test Shooting Review.
This will be my final Interview Video for SHOT Show 2025. I did get to talk with someone from Crosman but the Daisy rep was not around totally with so I did my best to talk about a couple of the Daisy products that I felt were interesting. If you are not aware, Crosman and Daisy have now joined forces together along with Gamo, Benjamin and SPLATRBALL so all of these product were on display at the Crosman Daisy Booth. I focussed on the Crosman M1 Full Auto Carbine and their updated all black ST1 Full Auto BB Rifle. We then took a look at some of the Game Face Airsoft Products and then I performed my own Interview/Review for Daisy talking about the Woodland Trail Model 1911 and Model 25 Lever and Pump Action BB Rifles.
I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.
Luckily I was able to find some time with James again this year and James gave us all the new details on some of the KWA updated and new products. Starting with the KWA ATP-Z Blowback Airsoft Training Pistol added recently to the KWA lineup, James also showed us a few versatile Carbine Pistol Kits made specifically for the ATP-Z and ATP-GT Pistols. Not yet fully released, James went over their updated TAC-9 hopefully coming out this year. We then got a nice tour of the updated Radian Model 1 AEG Airsoft Rifle with built in recoil system also built into KWA’s Q10 AEG Airsoft Rifle.
I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.
It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!
I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!
I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
I have reviewed a few other Umarex T4E .43 Caliber Paintball Airguns in the past so if you have watched any of those than you already have a pretty good idea what to expect from the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun. As with all my Field Test Shooting Videos I first test out the velocity in fps shooting 5 rounds through my Chronograph and averaging them out. I then place a full magazine generally into a paper target setup 30 feet down ranged see what the accuracy looks like. Make sure to also watch my Table Top Video for the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun for more information about specifications, details and some close up video.
For my velocity test I placed a brand new 12 gram CO2 in the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun and shot 5 rounds through my Chronograph, getting an average fps of 322. The fastest shot hit a velocity of 331 fps with the slowest shot hitting 311 fps so all pretty close together. I was using standard .43 caliber rubber balls as they are a lot less messy here inside the indoor sea can Airgun shooting range. I didn't check the temperate but generally I keep iti comfortable, so around 20 degrees Celsius or 68 degrees Fahrenheit.
Next up I shot a full magazine which is 8 rounds for the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun. Paintball guns are not known for their accuracy but I was impressed with the base grouping I got from the Umarex T4E PDP, It shot really well centered with 6 rounds all within about 3 inches of each other. 2 rounds did “wing out” a bit increasing the grouping to closer to about 6 inches but still a good grouping from a paintball gun design not so much to be super accurate but to be able to hit human sized targets ate realistic ranges which it does do very well.
I am not sure if this is the best test result for an Umarex T4E Paintball Airgun I have ever done but for sure it is one of the best for what I remember. Velocity was right on the mark and accuracy was again very good. I would be very confident in the performance of the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun out in the field. I also think it is one of the nicer looking Umarex T4E .43 Caliber Paintball Pistols but if you are more of a Glock or S&W person there are options form Umarex for you too so make sure to check out our selection of Paintball Airguns over on our our Canada and US Replica Airgun Stores.
Type:Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PDP. Materials: Metal & Polymer. Weight: 690 grams (1.52 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 8-9 Rounds. FPS: 300.
Trigger Pull: The trigger pull on the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun feels a lot like a double action trigger in length of pull and weight. When you pull the trigger back, there is an inner barrel that retracts back into the magazine sealing off a Paintball for more efficient CO2 usage, but this does cause some trigger drag and friction. There is also a working trigger safety which is a nice safety feature.
Accuracy: So far I have not had the opportunity to test the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun out, so stay posted for a future Field Test Shooting video where I will see what kind of fps and accuracy we can expect from it. I have made a Field Test Shooting Videos for the Umarex T4E Walther PPQ M2 CO2 Blowback .42 Caliber Paintball Pistol so have a watch of that video as the performance of the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun should be about the same.
Build Quality: The build quality of the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun is really very good, metal parts are where you would expect them to be, as in the slide, slide catch, barrel, magazine and most internal parts. This gives the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun a nice 1.5 pound weight to it with the magazine in which makes the Paintball version pretty close to the real still version. The Umarex T4E PDP does have a polymer frame but again this is normal with todays modern guns and helps keep the weight down. Fit and finish is also excellent.
Realism: The Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun is a very close replica of the real steel Walther PDP, from the fully licensed trademarks to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version, I doubt you would be able to easily tell them apart without actually handling them? You will find that the slide cycle distance is a much shorter than it would be with the real steel version, meaning that when the side cycles rearward or the slide catch is engaged, the slide does not go as far back as it should. Filed stripping the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun will require tools however.
Pros:
Really great weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the pistol.
Very Accurate Walther PDP replica, almost indistinguishable from the real steel version until you really examine it up close.
Everything works pretty much like the real gun so a great training tool.
White dot sights front and back, rear sight is adjustable for windage.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out making it easy to grab.
Can mount a red dot on the rear of the slide and comes with lots of mounting plate options.
Comes with a nice hard shell case for storing it in and locking it up.
Love the .43 caliber barrel opening, adds to realism.
Cons:
The trigger is a bit long as it shoots more like a double action trigger.
Magazine only holds 8-9 rounds, so you are going to need extra magazines or get quick at reloading.
Blowback action is not full blowback, more like a typical partial blowback CO2 BB airgun.
Comments:
Umarex and T4E working together have put out a nice line of .43 caliber CO2 Blowback Replica Paintball Training guns focusing on the Walther, Glock and HK Brands as Umarex holds a license with all of these gun manufactures. The realism is excellent not only in looks but also in function making their use as training weapons that much more valuable. If you are looking for the most realistic Replica Paintball Pi thenstol, Umarex T4E products are your best option and it is nice that we now have several models to choose from that may coincide with your standard side arm of choice.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…
Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.
Type: GBB Airsoft Pistol. Manufacturer: Distributed by EMG. Model:SAI 2011 DS 4.3. Materials: Mostly metal (Aluminum) and plastic. Weight: 1.94 pounds (878 grams). Total Length: 8.25 inches (210mm). Barrel: 4 inches (102mm) metal rifled. Propulsion: CO2 x1. Action: Semi auto Blowback, SAO trigger. Ammunition Type: 6mm Airsoft BB’s. Ammunition Capacity: 30+1. FPS: Claimed 380-430.
Trigger Pull: The trigger pull on the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol like what you would find on a traditional 1911 style pistol so it is Single Action Only and is nice and short and light in weight. Being a single action pistol for your first shot you will need to pull back the slide to chamber a round into the barrel which will also cock the hammer for you. the blowback action will cycle the slide for you from that point on automating the action.
Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol yet or even shot it at all so I can not comment on the performance other than the claimed velocity of (380-430 fps) which does seem a bit high to me? My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming out shortly…
Build Quality: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a well made Airsoft Pistol with quality materials throughout. You will find a machined aluminum slide an aluminum frame and a full metal drop out magazine. The barrel is Titanium Nitride Coated and the only real plastic parts I could find would be the grips, the gas tube and the hop-up wheel. The stainless coating on this Airsoft pistol looks fairly thick and so should stand up over time with less wear showing.
Realism: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol to me is not a true 2011 design as it does not have the once piece grip/trigger guard design found in 2011 pistols. It is double stack so that fits with the naming convention but I would say it is more like a combination of the Salient Arms SAI Red and SAI Red H. It does check all the boxes for realism in terms of function, looks and feel with all the working parts you expect on a Replica Airsoft Pistol including being able to fully field strip it.
Pros:
Superior Performance and 1:1 Scale Functionality.
Machined Aluminum Alloy Frame and Slide.
Rugged Reliability without sacrificing Weight.
Officially licensed by Salient Arms International.
Front and Rear Combat Style Sights with integrated Forward Fiber Optic.
Machined Anti-Glare Slide Top.
Ambidextrous Safety and Squared Trigger.
Titanium Nitride Style SAI Barrel for added durability.
On-Frame Integrated Accessory Rail.
Skeletonized trigger and hammer.
Options of both Green Gas and CO2 Magazines.
Deep Engraving with Real Steel Training Weapon Grade External Finish, Look, and Feel.
Cons:
Has orange barrel tip. But can be removed with some work.
No white dot or fiber optics on rear sight.
Not really a True 2011 in design as the name suggests.
Comments:
I am a huge 1911/2011 fan and so the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol really appeals to me. I like the compact design of the EMG SAI 2011 DS 4.3 yet it has a nice high capacity double stack magazine that gives this Airsoft Pistol a bit more girth in the hands which for me is OK as I have pretty large hands. I like that you have the option of shooting CO2 or Green Gas depending on what magazine you are using. This version comes with a CO2 Magazine, but you can purchase a green gas magazine if you prefer using gas over CO2. I like the modern look with the gold barrel and skeletonized trigger and hammer. The price is on the higher side but sometimes you have to pay a little bit more to get the additional quality and to have a gun that really stands out.
In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.
First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.
The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.
Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.
The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.
I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.
Here is Bonus Video Five in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this Fifth Bonus Full Auto Fun Video I bring out a past Full Auto Fun Airgun that I just couldn’t resist takin out for some full auto fun once again. The WE AK74UN Gas Blowback Full Auto Airsoft Rifle has got to be one of the hardest blowback Airguns I have shot, I would say even a bit more blowback feel than the KWA Mini UZI! The WE AK74UN Gas Blowback Full Auto Airsoft Rifle also does a great job of keeping Airsoft BB’s on target even in full auto with all that recoil as you will see in this video as I dial it in part way through my walk about. Unfortunately we do not sell anything like this anymore at least in Airsoft, the closest thing to it is the Crosman AK1 Blowback CO2 Full Auto BB Rifle which is still a lot of fun with a bit less recoil but a higher rate of fire.
Here is video three in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this third Full Auto Fun video I test out the Crosman A4-P AR Pistol and like my other videos it was not “picture perfect” or should I say “Video Perfect”… My cameras actually cooperated pretty good this time around, but one of my magazines had an issue (May have been me), so I had to switch over to my trusty KWA 1911 CO2 Blowback BB pistol to finish the job, good ting I had it on me, got to expect the unexpected!
