Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:M9A1 TBC. Materials: Mostly all Metal. Weight: 2.1 pounds (926 grams). Total Length: 9.25 inches (23.5cm) Barrel: 4 inches (10.2cm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is single and double action. When the hammer is back and it is in singe action, the trigger is short and light with about a quarter inch take-up before the release which is crisp and fairly light. You can decock the hammer and shoot in double action which does make the trigger pull much longer and a bit heavier but it is still very usable. There is also a semi cock-option where the hammer is partially cocked. This keeps the hammer off the firing pin and allows for a safer double action trigger pull.
Accuracy: So far I have not shot the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol or made my Field Test Shooting Video. I have shot lots of KJWorks Full Blowback Airsoft Pistols in the past and they have in general performed as expected. So I am confident when I get to the Field Test Shooting Video for the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it should perform well for me!
Build Quality: The KJWorks line of Airsoft Guns are known for their excellent build quality, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is another example of a well made Airsoft Pistol with lots of metal parts including the slide, frame, inner and outer barrel, magazine, trigger, safety, slide catch release, take down lever and magazine release. The only real plastic I can see is the grips, butt plate, and CO2 gas nozzle. Fit and finish is really good. There is just a little bit of slide wiggle, but all the mechanical parts work well.
Realism: Most Full Blowback Airsoft Pistols are built to be as close to a real steel pistol as possible with similar dimensions, weight and feel. The blowback action gives a Blowback Airsoft Pistol the required slide action to allow for chambering of an Airsoft BB along with the reseting of the hammer, so true single action shooting is possible. Other than shooting a real steel Beretta M9A1, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is as close as you can get to it. Holding this pistol in your hand, it would be hard to tell it is not the real deal.
Pros:
Pretty much all metal pistols with good weight to it.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
Comes with threaded outer barrel for adding a compensator or mock suppressor.
Comes with barrel extension for higher velocity shooting.
Easy to add accessories to under barrel picatinny rail.
White dot sights front and back.
Ambidextrous safeties.
Two toned tan and black finish looks good.
Field strip-able.
Cons:
Sight are non-adjustable.
Grips may be a bit wide for some small handed people.
Extended magazine makes it a bit bulkier.
You need an Allan key to adjust the Hop-up.
Comments:
The Beretta M9 is a classic Semi Auto Pistol that has been used in military and police for decades and has proven itself over time. I would say it is right up there with the classic 1911 as being recognized as a dependable and solid semi auto pistol. I still kind of prefer the 1911 but I’d take a Beretta M9A1 any day of the week. You really can’t go too wrong with the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it has it all… Almost all metal build, full blowback operation with both single and double action shooting options. You have a picatinny rail for adding accessories and easy to see white dot sights front and back. This is probably one of my favorite Beretta M9’s in terms of looks and features.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-19. Materials: Mostly all Metal. Weight: 1.9 pounds (850 grams). Total Length: 10.6 inches (270mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 25 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-19 CO2 Blowback Airsoft Pistol is excellent, it is super short and light as you would expect from a 1911 trigger, the makeup is almost non-existent with a super light release. Out of the box I find it perfect but you have the option of adjusting it with the supplied Allen key since it has competition adjustably. Like I said, out of the box it felt perfect to me so there is no real need to mess around with it.
Accuracy: At this point I have not shot the KJWorks KP-19 CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have shot my fair share of KJWorks Full Blowback Airsoft Pistols and they have in general performed very well for me, so I am confident when I get to the Field Test Shooting Video for the KJWorks KP-19 CO2 Blowback Airsoft Pistol it will do a great job!
Build Quality: The KJWorks line of Airsoft Guns is known for their excellent build and overall quality and the KJWorks KP-19 CO2 Blowback Airsoft Pistol is no exception. You will find all metal for the most part including some CNC Aluminum parts like the barrel and compensator, the slide and frame are metal along with the magazine and most of the controls. The pistol grip and trigger guard is all in one and the main plastic you will find on the KJWorks KP-19 CO2 Blowback Airsoft Pistol. Weight, feel and balance is really good.
Realism: The KJWorks KP-19 CO2 Blowback Airsoft Pistol is a double stack modern tactical 1911 in design. All of the controls and the overall design are that of a 1911 and so if you are use to shooting 1911’s, then you will be accustomed to this Airsoft Pistol. The full length blowback simulates the shooting experience along with some recoil feel and also allows for that true single action only trigger we are use to with 1911’s with its short and super light trigger pull. The KJWorks KP-19 CO2 Blowback Airsoft Pistol is fully field strippable which allows for easy to get to hop-up adjustments. I did notice that the Back-strap safety is non-functioning and just there for show, I am not sure why they did not make it a working safety?
Pros:
Lots of metal parts with good weight to it at nearly 2 pounds.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full-size drop out magazine that holds 25 rounds.
Picatinny rail underneath for adding accessories.
Adaptor plate for adding a red dot to the rear of the slide.
I like the green dot fiber optic sights, super easy to see on all backgrounds.
I like the two tone CNC aluminum barrel finish you can also see through the slide cutouts.
Super short and light skeletonized adjustable trigger looks and feels great.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Grips are wide, may not fit the hands of small shooters.
Not all controls are ambidextrous.
Rear sight is not adjustable.
Back-strap safety is non-functioning.
Comments:
I’ve mentioned in many of my videos how I really like 1911 styled pistols and of course ones with full blowback operation, so the KJWorks KP-19 CO2 Blowback Airsoft Pistol for me is a winner even before I even try it. Of course how it performs is going to be the real deciding factor, even if I am rooting for it. What is not to like though? It is almost all metal, has full blowback operation, easy to see fiver optic sights front and back, the ability to add a laser or tac light up front with a red dot on the back by installing the adaptor plate so you can really dress this one up and make it your own at the end of the day.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-13 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 8.25 inches (210mm) Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is what you would expect from a true Single Action Only Trigger, which is nice and light and relatively short. There is some initial take up but you can feel the point near the back where the release kicks in which is extremely light and predictable with no play in it. Of course you will have to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the slide cycling for you.
Accuracy: At this point I have not shot the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have already made a full Field Test and Shooting Video of the non-TBC version which is virtually the same Airsoft Pistol but without the threaded outer barrel extension. You can watch that Filed Test Video here where I get around 350 average fps and close to a 2 inch grouping shooting at a paper target setup 30 feet down range. Stay posted for my Full Field Test Shooting Video for the TBC version down the road.
Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so I expect the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol to be just the same. From my testing with the non TBC version and my initial first impressions, everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.
Realism: The KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but you could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 TBC CO2 Blowback Airsoft Pistol so it should not set off any red flags over at Glock. It’s good that there are various color options, tan, grey and black. It does seem that only the Tan and Grey two tone versions are available in the TBC version while the black version we seem to have available in the all black non-TBC version.
Pros:
Metal and Polymer with decent weight and good feel to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the CO2 and 22 rounds.
Well hidden safety incorporated into the serial number under the barrel.
Working trigger safety.
Super easy to see in all conditions fiber optic sight up front.
All working components like the real steel Glock styled pistol.
Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.
Comes with barrel extension for higher velocity shooting.
Would make a good training weapon if you are use to using Glocks
Comes in Tan and Grey two tone options also.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Sights are not adjustable.
Would have liked the addition of white dots or outline on the rear sight.
Slide spring could be slightly heavier.
Comments:
Let’s be clear, the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not a Glock Replica. It is different in many ways, the idea here is that it is close enough to be a good alternative if you are use to shooting Glocks and want something to train with that looks, feels and functions a lot like a traditional Glock. I am hoping the TBC version performs as well as the non-TBC version shot for me when I made my original Field Test Shooting Video back in 2023. For me the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol checks all the boxes… Full blowback operation, a very good trigger, lots of realism and I am sure good performance based on my past review.
Type:Airsoft GBB Rifle. Manufacturer: Novritsch. Model: SSQ22. Materials: Metal and plastic. Weight: 4 pounds (1.8 kg). Total Length: 32.7 inches (83cm). Barrel Length: 14.6 inches (37cm). Barrel: Metal non-rifled. Propulsion: Green gas. Action: Semi auto single action only trigger. Hop-up: Adjustable top mount hop-up. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 36 round full size drop out plastic/metal magazine. FPS: 400+.
Trigger Pull: The Single Action Only trigger pull on the Novritsch SSQ22 GBB Airsoft Rifle is a lot like what you would find on a real steel Ruger 10/22. It is short and light in action making it light and quick enough for action shooting or sniping with accuracy from long range. You will have to work the bolt to load an Airsoft BB in to the breach and ready the single action trigger for the first shot, but then the blowback action will do that for you for the rest of the shots.
Accuracy: I have not shot the Novritsch SSQ22 GBB Airsoft Rifle or tested it out so far, so I don’t really have much to say in terms of accuracy or if it is close to the claimed 400+ fps, but I will be making a full dedicated Field Test Shooting Video for it a bit down the road when I get caught up with my Field Test Shooting Videos. So until then we will have to wait and see,
Build Quality: Novritsch is a new product line for me so I have not had much hands on with any of their guns so far. My first impressions are that they make very good quality Airsoft products using high quality materials with well thought out designs. The Novritsch SSQ22 GBB Airsoft Rifle is not super heavy even though it does incorporate a fair amount of metal components including CNC machined aluminum.
Realism: The Novritsch SSQ22 GBB Airsoft Rifle is not an exact copy or Replica of a Ruger 10/22 22LR Rifle but it does share a lot of its design and mechanical functions. Most people when they buy a base Ruger 10/22 generally do a lot of upgrading and modifications to them that ultimately make it look a lot more like the Novritsch SSQ22 GBB Airsoft Rifle at the end of the day. As it is Gas Blowback it functions very similar to the real steel version with working blowback action which does give a bit of recoil to it and allows for a very nice short and light single action trigger.
Pros:
Mostly all metal design.
Gas-efficient nozzle assembly, CNC machined Hop-Up chamber, and Maple Leaf 60° bucking with a large nub surface.
Easy to access and adjustable hop-up, up to 0.46g BBs out of the box.
Multiple M-LOK Mounting Options (Sides and bottom).
Three preinstalled QD Sling mounts on each side.
Front groove similar to gas pistol mags. You can see how many BBs are left in your magazine.
Skeletonized stock with a rubber pad that is attached to a Picatinny rail.
Nice GBB recoil with each shot.
Compact and light weight, easy to carry on the filed.
Ruger 10/22 owners will be use to this design.
Cons:
Does not come with any sights, will need to add one.
Only shoots in semi auto to conserve ammo.
Has preinstalled orange tip but can be removed.
Comments:
I am always a sucker for Gas Blowback Airguns in general and with Airsoft Rifles the vast majority tend to be AEG’s, so when I get the chance to review a GBB Airsoft rifle, I am always a bit excited to do so. The Novritsch SSQ22 GBB Airsoft Rifle has a lot going for it, there are lots of metal parts where you want them to be, a great single action trigger, mounting options for a red dot or optical sight along with M-LOK on the sides and bottom for whatever accessories you plan to add to it. It’s nice that it starts out pretty light as the addition of a scope, perhaps a foregrip, maybe a taclight and or laser will bring up the weight. I most certainly am looking forward to the Field Test Shooting Video so I can see how this one performs.
In this months Replica Airguns Mystery Unboxing Preview Video, I take a look at 4 new items that showed up at my door. Two Airsoft Rifles, one being AEG and the other one a GBB. I also received two accessories for the GEM Alias super tiny multi ammo CO2 Pistol, A .50 caliber Paintball Barrel for it and and a 12 gram CO2 Adapter.
Both Airsoft Rifles are new to me from a company called Novritsch which is a higher end brand so the pricing is not cheap for either Airsoft Rifle. It was nice to get an AEG and GBB to review, the Novritsch SSR77 AEG Airsoft Rifle is a Replica of the Steyr AUG while the Novritsch SSQ22 GBB Airsoft Rifle is essentially a custom modded Ruger 10/22 copy, at least from what I can tell, it is solid and really well built.
I have already made a Table Top Video for the GEM Alias CO2 Pistol but I have been waiting for the .50 Caliber Paintball Barrel to show up so I can test out all 4 barrel ammo options. I also really wanted the 12 gram CO2 Adapter so I don’t have to use the small 8 gram CO2’s which are harder to find and not as cost effective as the 12 gram CO2. So now I am totally ready to make the GEM Field Test Shooting Review.
It’s been a while since I made a Field Test Shooting Video, probably well before I went to SHOT Show. I have been working on my SHOT Show 2025 Videos but those Interview Videos are all done and now it’s time to get caught up on some Field Test Shooting Video I have been wanting to make. So today I was able to make my Field Test Review Video for the Umarex DSX 45 Spring BB Pistol and for some this is a pretty entry level BB Pistol many might overlook but if you are simply looking for a 1911 based BB Pistol that is super inexpensive to buy, and cheap to shoot, and you don’t need quick semi auto shooting. Then the Umarex DSX 45 Spring BB Pistol Field Test Review could be an option for you. Make sure to watch my Table Top Review Video for the Umarex DSX 45 Spring BB Pistol for Details, Specifications, Pros and Cons and some nice close up video.
In this video I test out both the velocity and accuracy and I guess to some degree the usability so lets get started with the Velocity or fps portion of the testing. I loaded up the Umarex DSX 45 Spring BB Pistol with a half full hopper of 4.5 mm Steel BB’s, so around 100 BB’s which is way more than I needed and I shot 5 rounds through my Chronograph hitting the following fps: 191, 193, 188, 195, 197 which averaged 193 fps. Umarex claims a velocity of up to 240 fps which I think is a bit high as temperature is not even a factor with a spring piston Airgun, so warmer conditions will not really make much of a difference here.
I then placed a brand new paper target on my backstop 30 feet down range and proceeded to shoot 10 rounds into it using a semi rested shooting position. Hands rested on a sand bag up front and sitting on a stool in the back. This generally gives me pretty good stability while performing these tests, but there is always some human factor to take into consideration. I was not all that impressed with the grouping I got, the Umarex DSX 45 Spring BB Pistol likes to fling BB’s around a bit. You an see them curl so maybe some miscellaneous spin is being added in the barrel but it is not a consistent spin so the BB’s kind of spray all over the target that ended up giving me around a 8 inch grouping. Usually I can get around a 2 inch grouping with a BB Pistol that is generally what I would consider to be good accuracy.
I wish the Umarex DSX 45 Spring BB Pistol Field had hit closer to the 240 claimed fps and was also a bit more accurate as it would then be more usable at the 30 foot range I tested it at. I would suggest if you buy or own this BB Pistol, that you shoot it at targets closer in at 10-20 feet as the poor velocity and accuracy would be a lot less noticeable at these ranges and for that purpose it would be just fine. If you want a super low cost BB Pistol option that is also a decent looking 1911 Replica, and that you don’t need to go out and buy any CO2 to use it. Then take a look at one in our Replica Airguns Online Store. Heck, it’s only $19 US and $29 CAN right now!
Trigger Pull: The trigger pull on the BUG-A-SALT 3.0 Salt Gun is a Single Action Only trigger that requires you to work the pump action to load salt and prepare the hammer to fire in Single Action. There is a little bit of takeup and then a medium trigger pull weight that is about right for a pest control tool like this, as you do not want a super light trigger that could go off unintentionally. When you work the action using the pump, the real sight also pops up not only so you can use it but also to indicate that the BUG-A-SALT 3.0 Salt Gun is loaded and ready to fire.
Accuracy: So far I have not fired or tested out the BUG-A-SALT 3.0 Salt Gun as it is not the time of year for bugs just yet, so that portion of my review is going to have to wait until at least spring time when the bugs and flies come out in full force. I will not be making my traditional Field Test Shooting Video where I shoot at a Paper target setup 30 feet away, or even testing out the velocity in fps as the BUG-A-SALT 3.0 Salt Gun is only rated to shoot up to 3 feet away and I’m not sure how a blast of salt would even be read by a Chronograph or if that information is even important for a fly exterminator like this. I will be making some sort of shooting video for the BUG-A-SALT 3.0 Salt Gun when I am able to find bugs to blast…
Build Quality: The BUG-A-SALT 3.0 Salt Gun is made out of mostly plastic with I assume some metal working parts internally. Even the internal barrel is plastic since you are only shooting salt. The BUG-A-SALT 3.0 Salt Gun does feel solid and the working parts like the pump action, trigger and safety feel durable enough. The salt hopper lid may be a bit flimsy and if that breaks I’m not sure how one would keep the salt in the hopper?
Realism: The BUG-A-SALT 3.0 Salt Gun is not a replica gun to speak of, it kind of looks like a pistol grip pump action shotgun but there is really no way I feel anyone would mistake the BUG-A-SALT 3.0 Salt Gun for a real gun, this is probably good since you may want to keep it out lying around in your house for when you may need to do some bug blasting.
Pros:
Very unique product, not a lot of competition in the market.
Makes eliminating flies and bugs a lot more fun, would be fun at get togethers or parties.
Fairly well built, feels solid and durable.
Low cost to operate, only requires table salt.
Can get up to 80 shots per loaded salt hopper.
Can shoot flies up to 3 feet away.
Easy to access cross bolt safety.
Auto pop-up rear sight lets you know it is loaded and ready to fire.
SAO Trigger is relatively decent.
No bug guts mess to cleanup.
Cons:
Not suitable for larger bugs with hard exoskeletons like wasps or larger. Really only meant for flies.
Not a toy as it could be assumed it is. So be careful around kids as an eye shot could be very painful and cause injury.
Price is a lot more than a fly swatter that also gets the job done.
Comments:
If you hate flies as much as I do and would like a more sportsman like way to eliminate them rather than your standard fly swatter that basically mushes the fly into a bloody mess on what ever surface you mash it into. Then perhaps something like the BUG-A-SALT 3.0 Salt Gun may be just perfect for you. I am hoping it works as good as the advertising says it does. Based on some of the reviews I have watched it seems ideal for flies but may not so good for larger insects with hard exoskeletons. You are going to pay a lot more for the BUG-A-SALT 3.0 Salt Gun than a dollar store fly swatter will cost you, but I can guarantee you will have a lot more fun using it and no need for the messy bug juice clean up after a kill shot.
I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.
Luckily I was able to find some time with James again this year and James gave us all the new details on some of the KWA updated and new products. Starting with the KWA ATP-Z Blowback Airsoft Training Pistol added recently to the KWA lineup, James also showed us a few versatile Carbine Pistol Kits made specifically for the ATP-Z and ATP-GT Pistols. Not yet fully released, James went over their updated TAC-9 hopefully coming out this year. We then got a nice tour of the updated Radian Model 1 AEG Airsoft Rifle with built in recoil system also built into KWA’s Q10 AEG Airsoft Rifle.
I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.
It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!
I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!
I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…
Type: Multi-Ammo Pistol. Distributer:Alies Airguns. Model:GEM. Materials: Mostly metal with some plastic build. Weight: Barrel dependent. Total Length: Barrel dependent 3.5 inches (89mm) with BB and Airsoft Barrels. Barrel: Barrel dependent 2 inches (51mm) with BB and Airsoft Barrels Propulsion: 8 or 12 gram CO2 (12 Gram CO2 required adaptor sold separately). Action: Break Barrel / Single shot. Ammunition Type: 4.5mm Steel BB's / 6mm Airsoft BB’s (Can also purchase .117 Pellet, .50 & .43 cal Paintball, 9mm Arrow Barrels) Ammunition Capacity: 1 round. FPS: up to 400 using 4.5mm Steel BB’s.
Trigger Pull: The Alias GEM Multi Ammo Mini CO2 Airgun is a true single action only pistol that requires the pulling back of the hammer for each shot. This does give it a very nice trigger action that is short to medium in length with an easy release. The makeup is about medium for a single action trigger with a bit of an unpredictable release as there is no point in time that you feel it breaking on you. This can be good or bad depending on how you like your triggers as it is hard to tel when ti will actually release but the smoothness makes it a good trigger overall in my opinion
Accuracy: I have not shot the Alias GEM Multi Ammo Mini CO2 Airgun at all so far as it requires 8 gram CO2 and so I am waiting on the 12 gram adaptor for it before I can even give it a quick try. I will be making a full Field test Review for it swapping between a bunch of barrel options to see how each barrel adn ammo type performs in terms of power adn accuracy so stay posted for that video down the road a bit.
Build Quality: Build quality for the Alias GEM Multi Ammo Mini CO2 Airgun is very good with an almost all metal build other than the front and back sights, the trigger, the safety adn the barrel release. I kind of wish these parts were also metal as the rest of the Airgun is so pristine! The weight of this pistol feels very dense as it is so small yet has a good weight. The fir and finishes is all very good with the chrome finish on most parts and even the inclusion of what I believe are real gem stones on each side of the grips. The mechanical parts are also smooth and precise.
Realism: As far as I know the Alias GEM Multi Ammo Mini CO2 Airgun is not a replica of any production real steel gun that I am aware of. It looks to me like some sort of futuristic compact laser pistol? In terms of gun shape and what we are use to in terms of what a gun is it checks most of the boxes but it is it’s own design for sure.
Pros:
Super compact design, probably the smallest Airgun available.
Multiple quick change barrel and ammo options.
Mostly all metal build, very high quality materials.
Nice smooth and light SAO trigger.
Able to also use 12 gram CO2 with optional adapter.
Comes in different colors (red or black).
Decent velocity up to 400 fps depending on ammo type.
Eye-catching chrome and gemstone detailing make it a collector's piece.
Cons:
Uses 8 grams CO2 standard, harder to get and more expensive.
Only a single shot, not an action shooter.
On the pricy side at over $300 Canadian.
Comments:
I have to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not going to be for everyone as the price point is up there a bit for such a simple single action gun. That said it is super unique and the quality adn design is top notch. It may in fact be the smallest CO2 Airgun on the market adn you can literally put it in your front pocket easily. That combined with all the barrel and ammo options makes it super flexible if you plan on shooting a variety of different ammo types. Like I said in the video you may even be able to get away with buying it as a gift for your wife or girlfriend since it technically can be defined as being jewelry with the imbedded Gem stones in the grips. That may be a bit of a stretch unless she is also an Airgun fan.
Trigger Pull: The single action only trigger pull on the Umarex DSX 45 Spring BB Pistol is actually pretty decent. I would say it has a short to medium length with only a little bit of light take up and then an easy release that has no additional friction. You will have to cock the slide back for each shot which also cocks the hammer back allowing for a true single action trigger. The trigger its self is not like a traditional 1911 trigger in terms of looks but it does work well.
Accuracy: I have briefly shot the Umarex DSX 45 Spring BB Pistol so I could make some initial comments about its performance as it is a very new product to me. I will be making a full Field Test Shooting Video down the road but for now I can say it performed a lot better than I was expecting. The claimed 240 fps seems believable to me as shots at 20 feet hit the target with very little delay and even at 30 feet the delay was acceptable. In terms of accuracy, out of the box, for the most part hit the target at both 20 adn 30 feet very close to where I was aiming which is what you are hopping for.
Build Quality: Build quality for the Umarex DSX 45 Spring BB Pistol is also better than I would expect from a $29 Canadian almost all plastic BB Pistol. Everything felt nice and tight and fit and finish was good in general. There is even some metal where they could have gone with cheaper plastic, for example it has a metal trigger and slide catch release that is actually the safety. Of course the barrel and some other internal parts are going to be metal along with screws and such.
Realism: The Umarex DSX 45 Spring BB Pistol is a fairly believable replica of a more modern 1911 45 caliber semi auto pistol. Other than it being mostly plastic and much lower in weight, at around 1.25 pounds, the Umarex DSX 45 Spring BB Pistol does look the part with a working slide (for cocking the spring), a full size drop out magazines, a recessed barrel and a lot of detail in the finishing of it. I find it to be a little bit wider than a real 1911 would be in the grips and even the main frame and slide by just a bit.
Pros:
Super low coast to buy and shoot, no CO2 required, just need 4.5mm Steel BB’s and away you go.
Shoots pretty good, BB’s got to the target a lot faster than I was expecting them to and they shot where I was aiming in general.
Decent looking Replica of a modern 1911 Semi Auto Pistol.
Has a picatinny rail for adding accessories if you want to.
Single Action Trigger is pretty decent, a bit of take up but medium light weight to it.
Has a close to full size magazine that looks the part.
Magazine has a 200 round hopper capacity with 13 rounds being loaded into the feeder at a time.
Safety is worked into the slide catch release which adds to the realism in terms of looks.
Recessed barrel for added realism.
Actual working hammer you can de-cock if you want to for a bit of added safety.
Cons:
Almost all plastic other than some internal metal parts like the barrel and spring and some other stuff I am sure.
Takes a bit of effort to cock it which is required for each shot.
Sights are not adjustable and are all black with no white dots.
A bit beefy for smaller handed shooters.
Comments:
The Umarex DSX 45 Spring BB Pistol is a super inexpensive BB Pistol but don’t let that stop you from considering it to add to your collection. It has a lot going for it in my opinion. First off the price is super low to buy and to shoot, you only need a bunch of BB’s and you can shoot all day for a couple of bucks. It looks pretty believable as a 1911 Replica. The build quality and detail is a lot better than you should get for only $30 dollars here in Canada and when I quickly tried it out, it actually shot pretty hard for a spring BB Pistol and it seemed to hit the target right where I aimed even at 30 feet away. It even has a full size magazine that holds 200 rounds with a quick load 13 round spring feeding system to keep the fun going. Kind of a no brainer if you’re looking for a cheap and fun time.
I did my unboxing vide for both the Steambow AR-6 Stinger II Tactical and M10 Tactical already which is generally a preview of the products I am unboxing but with these types of compact crossbows, they generally need a bit of setup before they are complete and ready to view and use.
For that reason I wanted to make a quick combined Preview Video for Steambow AR-6 Stinger II Tactical and M10 Tactical Crossbows so you can see what they look like all put together, and what the main differences are between the two of them. This way you can figure out which one might be the best choice if you are in the market for a product like this.
Let’s go over the main specifications and differences to determine what you get with each one:
Distributed by: Steambow GmbH Austria.
Materials: Mostly plastic with some metal parts.
Weight: M10 4 pounds / AR-6 2.6 pounds.
Lengt: M10 24.2 inches / AR-6 22 inches.
Width: M10 17.5 inches / 17.5 inches.
Magazine Capacity: M10 10 bolts per external magazine / AR-6 6 bolts per internal magazine.
Another Mystery Box to share with everyone but this time I peaked a bit so it’s not as much of a mystery for me, but it will be for you. I was glad I peaked as the items inside where not the usual assortment and it was good I was able to get a bit of pre-intel on them before I jumped into this unboxing, as there was a lot to discover about each of the three items in the Mystery Box. I hope they appeal to some of you, I think they are very interesting and after checking them out, some of you may decide to add one or two of them to your collection.
The first two items I looked at are from an Austrian based company called Steambow. They are both compact crossbows that offer a unique reloading system with built in Magazines that hold either 6 or 10 rounds depending on the version you buy. The Steambow AR-6 Stinger II Tactical is the less expensive yet still “kind of expensive” version with a built in 6 round magazine While the AR Series Steambow M10 Tactical has an upper that accepts 10 round magazines you can preload. The Steambow AR-6 Stinger II Tactical comes with a 55 pound pre-strung bow that produces around 10 foot pounds of energy, while the Steambow M10 Tactical come with a 75 pound pre-strung bow which should produce close to 12 or more foot pounds of energy. Both incorporate fiber optic slights, lots of rail mounting options, AR style rear stocks which shoulder mount easy and quick cocking to make the most of the automatic bolt loading systems.
Another Archery based item also in this months Mystery Box was the Umarex AirJavelin FishR PCP based arrow launcher designed for anglers. It is intended to work with a fishing real of your choice and comes with a single retrievable barbed arrow, so a lot like bow fishing but with a PCP propulsion system. The Umarex AirJavelin FishR has a built in 4500 psi tank that is regulated to 800 psi and the arrow is a whopping 1250 grain to cut through the water with ease. The entire system is salt water resistant so you can use it in both fresh and salt water conditions. There are both picatinny and M-LOK mounting options for sights and accessories.
Stay posted for my Table Top and Field Testing Video Reviews coming shortly…
In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here…
When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.
Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.
All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.
Type: Pellet Pistol. Manufacturer:Umarex Model:Markpoint. Materials: Mostly plastic with some metal. Weight: 1.79 pounds (812 grams). Barrel: 9.75 inch (24.8 cm) Rifled steel barrel. Total Length: 17 inches (43.2 cm). Power Source: Spring piston. Action: Break Barrel - Single Action Only. Ammo Type: .177 caliber pellets. Ammo Capacity: Single shot. FPS: 395 with alloy pellets, 300 with lead pellets.
Trigger Pull: The trigger pull on Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is single action only and you will have to break the barrel and fully cock it to activate the trigger in order to shoot it. You will have to also insert a pellet for each shot when the barrel is in the open position. The trigger itself is a bit on the heavy side with a short takeup. It is not super heavy but I would not consider it light or even medium weight. There is a grip safety that needs to be pressed in at the back of the grip, or the trigger will not function. This is a nice additional safety feature.
Accuracy: So far I have not had the opportunity to test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, but the plan is to get to my Field Test Shooting Video shortly and see how it performs in terms of power and accuracy. The Umarex Markpoint Break Barrel .177 Cal Pellet Pistol does have a nice long rifled steel barrel so it has the potential to be very accurate. My main concern is with the sights as they are none adjustable and if it is not well centered out of the box then the only way to adjust it will be by adjusting your aim point to correct any off center shots. There is also no way that I can see to mount a red to or scope of some sort. It looks like there is a rail system on the barrel but it is just cosmetic and there is no way to mount a picatinny accessory to it. I am not sure why Umarex simply did not make the rail a true picatinny rail?
Build Quality: For around a $50 Canadian pellet pistol that has the potential to be a pretty decent entry level target pistol, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is pretty well made and feels very solid and mechanically tight. It is mostly plastic but does not feel cheap at all. It is a rather large pistol, especially the grips being fairly wide, so for people with small hands, it may be a bit hard to hold.
Realism: The Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is not a copy or replica of any real steel pistol in production that I know of. To be honest Umarex was not trying that hard to make it look like a real steel pistol as it has it’s very own look to it that I would say is modern and kind of futuristic looking. It for sure has its own style to it, and you are either going to like it to not? I do like that Umarex added the ejection port and vented barrel which does add to the cool factor and makes it feel more like a real gun.
Pros:
Feels well built and solid.
Overall look is good, kind of futuristic if you like that sort of thing.
I like the red highlights, not typical on a real steel gun but looks good on this design.
Expect it to have good accuracy, hope the sights are on point?
Easy to cock spring piston system.
Sights are easy to line up .
Grip safety is a nice safety feature.
Fake ejection port is a nice touch, not something you would normally see on a target pistol like this.
Nice low price tag for some fun target shooting.
Cons:
Trigger is a bit heavy but in terms of length and break is OK.
Sights are not adjustable and no way to add a red dot or other sighting system.
Grip may be a bit wide for smaller handed shooters.
Comments:
For me I think the deciding factor on how I feel about the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is going to come down to how it performs as I have my reservations on how accurate it is going to be and if it shoots true out of the box. I really hope the sights are dialed in out of the box since there is no way to adjust them or add a red dot or other sighting system. The heavy trigger will take a bit of getting use to also but once adjusted to it I should be able to get some decent groupings. For the price, if it turns out to be a decent shooter and you like the look of it, then by all means it would make a great target plinker that you should be able to get proficient at shooting with. I will leave my final thoughts for the Field Test Shooting video on this one…
In this Indoor Field Test Shooting Video, I put the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol through my usual performance shooting test by first finding out what the velocity is by shooting 5 rounds through my Chronograph using a fresh CO2 along with .20 gram Airsoft BB’s. I follow this up with a 10 round accuracy test, again using .20 gram Airsoft BB’s and shooting at a paper target setup 30 feet down range, while seated on a stool in the back with my hands rested on a sand bag up front. This generally works pretty well and helps me get the most out the gun I am testing. If you are also interested in details and specifications than make sure to watch my Table Top Video I already made for the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol.
So how did the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol do in my testing? Not bad! Starting with the velocity fps test I shot 5 rounds through my chronograph with a brand new 12 gram CO2 cartridge and while EMG claims around 400 fps, I only averaged 321 fps with my fastest shot hitting 323 fps and my slowest shot hitting 318. So relatively close in terms of fps but not close to the 400 claimed fps. Totally fine for Airsoft games, perhaps in super hot temperatures, it can do better but in standard room temperatures this is what I got.
Next up I tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol’s accuracy from 30 feet away and put 10 rounds down range as best as I was able to do with my slightly aging eyes. I was happy with the results with most of the rounds staying within about 2 inches of each other and just slightly to the right of the bullseye, but pretty much perfect in terms of elevation. There where a couple of rounds that came outside of the base 2 inch grouping, which increased the grouping to about 3 inches total.
I am a huge 1911 fan and so a 2011 design only tuns up the dial that much more. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol performed without a glitch for me and I love the extra heft and snappy blowback action along with the crips light and short single action 1911 trigger. I was a bit surprised by the lower 323 fps velocity, but to be honest this is more than a capable velocity for a combat close range Airsoft Pistol. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a real looker for sure, it just needs that eye soar of an orange tip removed to perfect its look. If you like the look and feel of a 1911/2011 in your hand, and if stainless steel is your color of choice, then I would say go for this one.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
