Entries in Revolver,Pellet

Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver Table Top Review

No Comments

Type: Revolver CO2 Airsoft Pistol.
Manufacturer: Distributed by Umarex.
Model: Smith & Wesson 629 Competitor.
Materials: Mostly all Metal.
Weight: 3.3 pounds (1.55 kg).
Total Length: 12 inches (30.5cm)
Barrel: 6 inches (15cm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Revolver, SA & DA trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 6 round cylinder.
Velocity: Claimed 500fps.

Trigger Pull: The Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver shoots in either single action or double action. If you pull the hammer back, you can shoot in single action which will give you a super short trigger pull with virtually no takeup and a very light and predictable release, perfect for when you are wanting the best possible accuracy out of this Airsoft Revolver. You can also simply just pull the trigger in double action which means your trigger finger is doing all the work of pulling back the hammer and releasing it which is a much longer trigger pull that is between medium and heavy pull, but still fine for quicker action shooting.

Accuracy: So far I have not shot the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver but I have shot a lot of similar shell loading 6 shooter revolvers. Yes the cylinder and the actual shells are a bit larger but this should not really affect accuracy or power. Umarex does claim a max velocity of 500 fps which does seem high, so it will be interesting to see if the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver will actually hit these numbers. In my past Field Test Shooting Video Reviews I am generally able to get at least a 2 inch 6 shot groupings from 30 feet away from my paper target so hopefully that is the case with the S&W 629 Competitor.

Build Quality: If you’re looking for a very solid and hefty Airsoft revolver, than I don’t think there is anything more beefy than the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver. It is a whopping 3.3 pounds and is almost all metal so smaller handed shooters may find this one a bit too much to hold comfortably. Fit and finish is very good and I do really like the satin stainless steel look to it even though Umarex calls it a chrome finish.

Realism: I like the shell loading revolvers for the added realism you get manually loading the cylinder with 6 preloaded shells. In almost all of the shell loading 6 shooter revolvers, the cylinder and shells are actually smaller than what you would find in a real steel 6 shooter revolver, especially the Single Action Army Revolvers as they would normally shoot a .45 caliber shell rather than a .38 caliber shells. So it is nice that Umarex didn’t just go with already to go parts and they gave the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver newly designed larger shells and a larger cylinder, maybe the shells are not actually .44 caliber in size but the larger cylinder and larger shells does give it more realism. Of course almost all the parts function just like they would in a real steel revolver.

Pros:

  • Almost all Metal build with a very heavy weight of 3.3 pounds.

  • Full adjustable rear sight for windage and elevation.

  • Comes with 12 reloadable shells, most only come with 6 shells.

  • Grooved Pistol Grips for added comfort and grip.

  • Picatinny rail on top of barrel for adding a red dot or optional sight.

  • Nice Smith & Wesson markings on gun stamped into the frame.

  • Option of shooting in single or double action, nice light single action trigger.

  • I like the satin stainless finish.

  • Super realistic loading and shooting with the removable shells.

Cons:

  • Does come with an orange tip.

  • No adjustable hop-up I can see.

  • Rather large and heavy so not great for younger or smaller handed shooters.

  • Velocity may be a bit hot for some Airsoft games.

Comments:

I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road…

Categories: 6mm, Airsoft, CO2, Comparison, Pistol, Review, Revolver, Vimeo Video Tags: Umarex, Smith & Wesson, Smith & Wesson 629

March 2025 Mystery Box Unboxing Preview

No Comments

In this Mystery Box Unboxing Video I take a look at three Airsoft products, two pistols from Umarex and two AEG Airsoft Rifles from Specna Arms. As this is essentially an Unboxing Preview Video, I don’t go into a lot of detail for each item as this is my first real exposure to these items for the most part. I will be making full Table Top and Field Test Video for each item once I get to know them a bit better and share all the specifications and features along with shooting performance.

Starting with the Umarex products, I did get the chance to checkout the Umarex Smith & Wesson 629 CO2 Airsoft Revolver at this years SHOT Show, and it is a very solid shell loading 44 Magnum styled Revolver with full Smith and Wesson licensing. From what I remember this item may only come in the Airsoft version at the time of this review and it does have a claimed velocity of 500 which may be a bit hot for Airsoft games but it would be a lot of fun shooting at pop cans and the likes.

The second Umarex products is a pretty basic mostly clear plastic Spring Powered Beretta 92 FS Airsoft Pistol. It is fairly light weight with it’s mostly all plastic construction and the velocity is also on the lower side at only around 250 fps. Since it is distributed by Umarex it carries the Beretta licensing which is nice and all, but on a clear plastic gun I am not sure if is really a major feature.

The first Airsoft Rifle out of the Mystery Box was the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle which is your standard AR configuration, mine was the shorter barrel version but it does come in a longer barrel version as well. The top and bottom receiver and most of the outer components are going to be Nylon Fiber Reinforced Plastic. It does include features like Rotational Hop Up Chamber, SA ETU™ Optical Electronic System Optimizes for improved trigger response and Quick Spring Change System to name a few.

Something I don’t see too often are Pink Assault Rifles! So it was nice to get the pink version of the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle. It does come in a Black and Tan version along with an all Black configuration. It’s really a great looking AEG Airsoft Rifle in any color you decide to go with, and I like the compact feel it has with lots of options for mounting accessories on the top bottom and side rails. You can get going right away using the included pop-up front and rear sights or throw a red dot or optical sight on it.

Categories: 6mm, AEG, Airsoft, CO2, Full Auto, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video Tags: Umarex, M92, Specna Arms, SA-FX02 FLEX, SA-FX10 FLEX, Smith & Wesson, Smith & Wesson 629

SHOT Show Las Vegas 2025 Replica Airguns Umarex Interview

No Comments

I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.

Categories: 4.5mm / .177 cal, 6mm, AEG, Airgun News, Airsoft, Airsoft News, BB, Blowback, Break Barrel, CO2, Full Auto, GBB, Pellet, Pistol, Rifle, Semi Auto, Scope, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, SHOT Show 2025, SHOT Show

SHOT Show Las Vegas 2025 Replica Airguns Barra Interview

No Comments

I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.

Categories: 4.5mm / .177 cal, 6mm, .22 cal, AEG, Airgun News, Airsoft, Airsoft News, BB, Blowback, CO2, Bulk Air, Full Auto, Pellet, PCP, Pistol, Repeater, Rifle, Semi Auto, Scope, Revolver, Single Shot, Vimeo Video Tags: Barra, SHOT Show 2025, SHOT Show

SHOT Show Las Vegas 2025 Replica Airguns ASG Interview

No Comments

It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!

Categories: 4.5mm / .177 cal, 6mm, AEG, Airgun News, Airsoft, Airsoft News, BB, Blowback, CO2, Full Auto, Gas, GBB, Pellet, Pistol, Repeater, Replica Airguns News, Revolver, Rifle, Semi Auto, Single Shot, Vimeo Video Tags: ASG, SHOT Show 2025, SHOT Show

SHOT Show Las Vegas 2025 Replica Airguns Teaser

No Comments

I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!

I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…

Categories: AEG, Airgun News, Airsoft, Airsoft News, Arrow, BB, Blowback, Bulk Air, CO2, Break Barrel, Crossbow, Full Auto, Gas, GBB, Multi-pump, Paintball, PCP, Pellet, Pistol, Pump, Repeater, Replica Airguns News, Revolver, Rifle, Scope, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: SHOT Show, SHOT Show 2025, Umarex, ASG, Crosman, Daisy, KWA, Steambow, Barra

Alias GEM Multi Ammo Mini CO2 Airgun Table Top Review

No Comments

Type: Multi-Ammo Pistol.
Distributer: Alies Airguns.
Model: GEM.
Materials: Mostly metal with some plastic build.
Weight: Barrel dependent.
Total Length: Barrel dependent 3.5 inches (89mm) with BB and Airsoft Barrels.
Barrel: Barrel dependent 2 inches (51mm) with BB and Airsoft Barrels
Propulsion: 8 or 12 gram CO2 (12 Gram CO2 required adaptor sold separately).
Action: Break Barrel / Single shot.
Ammunition Type: 4.5mm Steel BB's / 6mm Airsoft BB’s (Can also purchase .117 Pellet, .50 & .43 cal Paintball, 9mm Arrow Barrels)
Ammunition Capacity: 1 round.
FPS: up to 400 using 4.5mm Steel BB’s.

Trigger Pull: The Alias GEM Multi Ammo Mini CO2 Airgun is a true single action only pistol that requires the pulling back of the hammer for each shot. This does give it a very nice trigger action that is short to medium in length with an easy release. The makeup is about medium for a single action trigger with a bit of an unpredictable release as there is no point in time that you feel it breaking on you. This can be good or bad depending on how you like your triggers as it is hard to tel when ti will actually release but the smoothness makes it a good trigger overall in my opinion

Accuracy: I have not shot the Alias GEM Multi Ammo Mini CO2 Airgun at all so far as it requires 8 gram CO2 and so I am waiting on the 12 gram adaptor for it before I can even give it a quick try. I will be making a full Field test Review for it swapping between a bunch of barrel options to see how each barrel adn ammo type performs in terms of power adn accuracy so stay posted for that video down the road a bit.

Build Quality: Build quality for the Alias GEM Multi Ammo Mini CO2 Airgun is very good with an almost all metal build other than the front and back sights, the trigger, the safety adn the barrel release. I kind of wish these parts were also metal as the rest of the Airgun is so pristine! The weight of this pistol feels very dense as it is so small yet has a good weight. The fir and finishes is all very good with the chrome finish on most parts and even the inclusion of what I believe are real gem stones on each side of the grips. The mechanical parts are also smooth and precise.

Realism: As far as I know the Alias GEM Multi Ammo Mini CO2 Airgun is not a replica of any production real steel gun that I am aware of. It looks to me like some sort of futuristic compact laser pistol? In terms of gun shape and what we are use to in terms of what a gun is it checks most of the boxes but it is it’s own design for sure.

Pros:

  • Super compact design, probably the smallest Airgun available.

  • Multiple quick change barrel and ammo options.

  • Mostly all metal build, very high quality materials.

  • Nice smooth and light SAO trigger.

  • Able to also use 12 gram CO2 with optional adapter.

  • Comes in different colors (red or black).

  • Decent velocity up to 400 fps depending on ammo type.

  • Eye-catching chrome and gemstone detailing make it a collector's piece.

Cons:

  • Uses 8 grams CO2 standard, harder to get and more expensive.

  • Only a single shot, not an action shooter.

  • On the pricy side at over $300 Canadian.

Comments:

I have to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not going to be for everyone as the price point is up there a bit for such a simple single action gun. That said it is super unique and the quality adn design is top notch. It may in fact be the smallest CO2 Airgun on the market adn you can literally put it in your front pocket easily. That combined with all the barrel and ammo options makes it super flexible if you plan on shooting a variety of different ammo types. Like I said in the video you may even be able to get away with buying it as a gift for your wife or girlfriend since it technically can be defined as being jewelry with the imbedded Gem stones in the grips. That may be a bit of a stretch unless she is also an Airgun fan.


Categories: .50 cal, .43 cal, 9mm, 6mm, 4.5mm / .177 cal, Airsoft, Arrow, BB, Break Barrel, CO2, Paintball, Pellet, Pistol, Review, Single Shot, Vimeo Video Tags: Alias Airguns, GEM

Mystery Box Unboxing Video Late December 2024

No Comments

This video was made right at the end of December 2024 but I am posting it in the new year so we will call it a late December video… That makes two Mystery Box Videos for December 2024 which means a lot of new products on my plate to review this new year. Hopefully I can get a bunch of them done before I head out to SHOT Show this year in a couple of weeks as I will have a lot of videos and interviews to post for SHOT Show as is always the case when I get back.

At least in this unboxing videos I can give you an idea of some of the new products we have in the Replica Airgun online Stores usually in both the Canada and the US Replica Airgun Stores. In this Unboxing Video I received 5 new products to show you. A Less Lethal Pistol and Spring Piston BB Pistol from Umarex, a Carbine Airsoft Rifle from KJWorks, a Multi-barrel super compact Airgun from Alias Airguns out of Canada, and Bug Exterminator from a company called Skell Inc. Here are some of the basics for each of them:

Umarex P2P HDP 50 Compact CO2 Paintball Gun

Type: Compact CO2 Training Rubber Ball Pistol.
Manufacturer: Umarex.
Model: P2P CO2 HDP Compact .50 Caliber Training Rubber Ball Pistol.
Caliber: .50 Caliber.
Ammo Type: .50 Caliber Powder Balls / Rubber Training Rounds.
Magazine Capacity: 4 Rounds.
Power Source: Single 8g CO2 Cartridge - 3 PCS INCLUDED.

Alias GEM Multi Ammo Mini CO2 Airgun

Type: CO2 Air Pistol.
Manufacturer: Alias Airguns.
Model: Gem.
Caliber: Multi Barrel Comes with 4.5mm Steel BB adn 6mm Airsoft.
Power Source: Single 8g CO2 Cartridge or 12 gram with adaptor.
Magazine Capacity: Single shot.
Buy the .50 Caliber Paintball Barrel Set: AA1002.
Buy the Rocket Barrel Set: AA1003.
Buy the 12 Gram CO2 Adaptor: AA1004.

Umarex DSX 45 Spring BB Pistol

Type: Spring Air BB Pistol.
Manufacturer: Umarex.
Model: DSX 45.
Ammo Type: 4.5mm Steel BBs.
Power Source: Spring Air.
Magazine Capacity: 13 Rounds (Rapid Load) with 200 Round Reservoir.

KJWorks MK1 Carbine Green Gas Airsoft Rifle

Type: Airsoft Rifle.
Manufacturer: KJ Works.
Model: MK-1 Carbine.
Power Source: Green Gas.
Action: Semi-Automatic.
Ammo Type: Airsoft BBs 6mm.
Ammo Capacity: 17 Rounds.

Bug-A-Salt 3.0 Insect Exterminator

Type: Pump Action Bug Exterminator.
Manufacturer: Skell Inc.
Model: Bug-A-Salt 3.0.
Ammo Type: table Salt.
Power Source: Spring Air.
Magazine Capacity: a bunch.

Categories: .50 cal, 6mm, 4.5mm / .177 cal, Accessory, Airsoft, Arrow, BB, CO2, Gas, Paintball, Pellet, Pistol, Pump, Repeater, Review, Rifle, Semi Auto, Spring Piston, Vimeo Video Tags: Umarex, Bug-A-Salt, KJWorks, GEM, Ruger MK1, DSX 45, T4E, T4E PDP, T4E HDP 50 Compact

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol Field Test Review

No Comments

In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here

When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.

Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.

All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.

Categories: 4.5mm / .177 cal, Field Test, Pellet, Pistol, Review, Single Shot, Spring Piston, Vimeo Video, Break Barrel Tags: Umarex, Markpoint

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle FIeld Test Review

No Comments

In this Field Test Shooting Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle, I get to test out a Replica .22 Caliber CO2 Rifle which I don’t get the chance to do so very often and .22 caliber combined with a Replica in a an Airgun is very uncommon! Well today I got to test one out and it was a lot of fun, I would say it performed very well for me. As usual, my main goal is to find out what the real world velocity is in fps and also to see how accurate the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is shooting at a paper target 30 feet away. Also make sure to checkout my Table Top Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for more details and specifications and close up video.

First in my to-do list was the velocity portion of my Field Test, and so I loaded up dual 12 gram CO2 cartridges into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle along with 10 preloaded .22 caliber shells. By the way I was using Gamo 15.43 grain (1 gram) lead pellets and the temperature was just a bit below room temperature, so not 100% ideal for maximum velocity but still warm enough for my purposes. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shot an average 5 shot velocity of 390 fps with the fastest shot hitting 411 fps and the slowest performer hitting 370 fps. That works out to 5.78 average foot pounds of energy.

Next up, I first recovered the 5 ejected shells I used in the velocity test, and again reloaded them with some more pellets and then back into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for my accuracy test. Keep in mind with a lever action rifle, I have to remove the rifle from my shooting position each time to work the lever action and chamber a round. This does cause me to have to fully reset for each shot which does kind of break a shooting grove just a bit, but it did not seem to make much of a difference as my accuracy results where still very good. I did notice vertically the grouping was about 2 inches while side to side it was closer to 1 inch. I attribute this to the sighting system as it was hard for me to focus on the rear sight and make sure I had it perfectly level with the front sight for each shot, which would account for some variation in elevation. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle was also shooting about 2 inches high from my aim point.

I have said this a bunch of times before, but I do really love shooting lever action rifles. Even a low cost Red Ryder BB Rifle brings a smile to my face. I also have a Henry Lever Action 22LR that I also really enjoy shooting when I get the chance. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is a really sweet looking rifle that performs as good as it looks thankfully! It’s also well priced for what you get in my opinion at just under $300 Canadian at the time of this video. If you want a fairly powerful Replica Air Rifle that hits hard and true and is super fun to shoot then get this one but make sure to get a bunch of extras shells cause they like to disappear on you pretty quickly. For now I still have all 10 of mine but they love to hide in the craziest places when they get ejected :)

Categories: .22 cal, CO2, Field Test, Pellet, Review, Rifle, Vimeo Video Tags: Barra, Barra 1866

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle Table Top Review

No Comments

Type: CO2 Pellet Rifle.
Manufacturer: Barra.
Model: Barra 1866 Lever Action.
Materials: Mostly plastic/some metal.
Weight: 6.5 pounds 2.9kg).
Total Length: 38.5 inches (90.7cm).
Barrel: 18.75 (47.6) barrel rifled.
Propulsion: Dual 12 gram CO2.
Action: Lever Action SAO.
Ammunition Type: .22 Caliber Pellets.
Ammunition Capacity: 30 round magazine.
FPS: 410 fps.

Trigger Pull: The trigger pull on the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is light short and crips with just a little bit of take-up before it releases. You will have to first either work the lever action which also chambers a preloaded shell into the breach of the barrel, or you will have to pull the hammer back in order for the trigger to be active as a single action trigger.

Accuracy: At this time I have not made my Field Test Shooting Video or shot the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. I am really looking forward to testing it out when I make my Filed Test Shooting Video Review for it hopefully soon! Barra claims is will shoot .22 caliber pellets up to 410 fps. I am not sure if this is for mid grain or light grain pellets but we will find out again when I make my shooting review video. The rear sight does have three positions of elevation so I should be able to find one that works here my Indoor Sea Can Airgun range where I setup paper targets at 30 feet away. I am hoping the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shoots close to the bullseye out of the box as it does not have any windage adjustment to space of.

Build Quality: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle seems to very well built and has a lot theft to it weighing in at 6.5 pounds so it feel very solid to hold and shoulder. It is mostly all metal which from what I can see, only the stock is plastic rather than actual wood. The faux wood does look very real and unless you get in close to it and notice none of the real wood imperfection, then you can figure out it is emotion wood. The fit and finish is all quality and I expect the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle to perform reliably.

Realism: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is based on the Winchester 1866 Lever Action Rifle and does look the part with all the expected working parts found on a lever action rifle. Barra has included a thumb safety behind the hammer along with a grip safety that requires the shooter to hold the lever tight to the stock or you will not be able to pull the trigger. Being a shell loading design that requires preloading pellets into the shells and then loading those shells into the rifle tub magazine also makes the experience feel very real. Barra has done a great job hiding the CO2 being the butt plate and the barrel open is about the diameter of a 45 caliber bullet.

Pros:

  • Not many rifles come in .22 Caliber. Should have a bit more down range power over .177 caliber.

  • Almost all metal construction with good weight and feel to it.

  • The Faux Wood stock looks very realistic, hard to tell it’s plastic!

  • Octagonal recessed barrel adds to realism.

  • White writing is mostly under the barrel so fairly discreet.

  • The gold receiver and but plate add to the look of quality.

  • Rear sight has three positions for different ranges and sighting types (standard low, peep mid, high distance).

  • Also have the option of mounting a red dot or magnified optical sight on the rear compact picatinny rail.

  • Dual 12 gram CO2 system is less expensive and reduces the cool down effect while allowing for lots of pellet reloads between heaving to change the CO2.

  • Has a secondary safety on the lever, it must be pressed into the stock to shoot, kind of like a grip safety.

  • Claimed 410 fps should be more than sufficient for mid range shooting.

  • Lever action rifles are just so much fun to shoot!

Cons:

  • Rear sight is not adjustable for windage.

  • More than likely going to lose some shells if you are shooting outside in the yard as they all eject into the grass or who knows where? Will probably need to buy some backup shells over time.

  • You will have to hold the lever snug to the stock or the trigger will not work.

Comments:

I was super excited this year at SHOT Show when I went to the Barra Booth and the Barra Team showed me their new Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. We also spoke about how the .22 caliber version shoudl be Canada friendly as it was under 500 fps. Here we now and I finally got my hands on one and it is nice to have a .22 Caliber Replica CO2 Lever Action Rifle available to us Airgun Collectors. Sure Umarex has their Legends CO2 Shell Loading BB Rifle but I like The Barra 1866 shooting pellets over BB’s. Price point for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is very reasonable for what you get as it is a lot of gun for the money. I am really looking forward to seeing how well it shoots and if it can get close to the claimed 400 fps.

My Vimeo Table Top Review for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle:

Categories: .22 cal, CO2, Pellet, Review, Rifle, Vimeo Video Tags: Barra 1866, Barra

September 2024 Another Mystery Box Unboxing Video

No Comments

Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…

Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle

  • ManufacturerBarra Airguns

  • Caliber: 0.22

  • Powerplant: CO2

  • Action: Lever

  • Loudness: Level 2

  • Max Velocity: 450 fps and above

  • Shot Capacity: 10

  • Weight: 6.5 lbs

  • Barrel Length: 18 inches

  • Total Length: 38.5 inches

  • Stock: Faux Wood

  • Barrel: Smoothbore

  • Sound Suppression: No

  • Trigger: 3 lbs

  • Safety: Manual and Grip

  • Optic Mount: Picatinny mount

  • Recommended Use: Plinking

Umarex HK 416 A4 GBB Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer: Umarex / KWA (Licensed by H&K)

  • PropulsionGas Blowback

  • Caliber: 6mm plastic Airsoft BB's.

  • Muzzle Velocity: 400~ FPS (Measured with 0.20g BBs)

  • Magazine Capacity: 30~rds

  • Gas Type: Green Gas, Propane

  • Fire Modes: Semi / Full-Auto / Safety

  • Hopup: Yes, Adjustable

  • Inner Barrel: 390~mm

  • Length: 790mm - 875mm

  • Weight: 2900g

  • Package Includes: Gun, Magazine, Manual

G&G RK Beta AK AEG Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer:G&G Armament

  • Model: RK Beta

  • Materials: Metal and PlasticWeight:

  • Barrel: Smoothbore

  • Power Source: Electric (Battery)

  • Action: Semi-Automatic/Full-Automatic

  • Ammo Type: Airsoft BBs 6mm

  • Ammo Capacity: 600 Rounds

  • FPS:390

Categories: 6mm, .22 cal, AEG, Airsoft, Blowback, CO2, Full Auto, Gas, GBB, Pellet, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, Barra, G&G, HK416, AK-47, RK Beta, Barra 1866

September 2024 Mystery Box Unboxing Video

No Comments

In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.

First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.

The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.

Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.

The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.

I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.

Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun

  • Type: Paintball gun

  • Model: T4E Walther PDP

  • Materials: Durable polymer and matte finish

  • Power Source: CO2

  • Weight: 690 g (1.52 lb)

  • Barrel: 4 in

  • Action: Semi-automatic, single-action, blowback

  • Ammo type: Paint, dust, and rubber .43 caliber ammo

EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol

  • FPS Range: 380-430

  • Dimensions: 205mm x 150mm

  • Holster Compatibility: EMG SAI 2011 pistols feature a slightly wider frame and may not fit some TM/WE compatible 2011 holsters

  • Magazine: 30+1 rounds.

  • Gas Type: CO2

  • Firing Mode: Semi Automatic, Safety

  • System: Gas Blowback

  • Hopup: Yes, Adjustable

  • Package Includes: Gun, Magazine, and Manual

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol

Caliber: .177 caliber that ensures accuracy and precision.

  • Stock Finish: Boasting a sleek black polymer finish, exuding a modern and tactical style.

  • Type: a lever cocking mechanism for swift and efficient operation.

  • FPS: With an impressive velocity of 425, delivers powerful and precise shots with every trigger pull.

  • Overall Length: Exhibiting a compact design with a total length of 10.8 inches, perfect for various shooting scenarios.

Umarex HK416 CO2 Blowback Burst BB Rifle

  • Type: BB Rifle

  • Manufacturer: Umarex

  • Model: Heckler & Koch HK416

  • Materials: Metal and Polymer

  • Weight: 6.2 lb (2817 g)

  • Power Source: 2x 12g CO2 cartridges

  • Action: Semi-auto and 6-shot burst

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 36 Rounds

  • FPS: up to 450

Categories: 4.5mm / .177 cal, .43 cal, 6mm, Airsoft, BB, Blowback, Break Barrel, CO2, Full Auto, Paintball, Pellet, Pistol, Review, Rifle, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, EMG, SAI 2011 DS 4.3, HK416, H&K 416, T4E PDP, Walther, Markpoint

Airgun Safety 101

No Comments

Airguns are not toys and as so require proper storage, transportation and handling so as not to cause an accident that could be minor or even deadly.

No matter if you are handling an Airgun or a “Real Gun”, they should both be handled in the same manner even if the consequences from an accident with an Airgun may be less serious. Life long injuries like the loss of an eye are nothing to be taken lightly.

For the most part, what I talk about in this Airgun Safety 101 video can also be applied to a “Real Gun” although most countries will have stricter laws and guidelines in the storage, transportation and handling of “Real Guns” over an Airgun.




Storing Your Airgun:

In Canada an unregulated Airgun does not have any real specific safe storage guidelines but common sense should be used and I recommend that you at the bare minimum keep your Airgun in some sort of locked space whether it be a safe, cabinet or room that is locked all of the time.

You can also put a trigger lock on your Airgun if you do not have a lockable storage location for it.

You should also make sure to store your Airgun unloaded, at least when it comes to BB’s and or Pellets. If there is some unused CO2 in it, or it is charged with Compressed Air, but unloaded in terms of ammunition, that is OK, but again keep it in a safe location away from anyone that may be able to get their hands on it and hurt themselves or others.




Transporting Your Airgun:

Again, in Canada an unregulated Airgun does not have any real transportation guidelines but if you keep your Airgun out in the open and someone sees it, they will most certainly call the police and more than likely you may find yourself staring down the wrong end of a police firearm, at least until they sort it all out. This is very serious as unfortunately people have died as a result of handling their Airguns out in the open and underestimating what kind of police response that may entail.

For that reason alone, always keep your Airgun out of sight in a case or backpack or the trunk of your car. Never transport your Airgun loaded and it is best if you can lock it in a case or put a trigger lock on it for added safety when transporting it.



Shooting Your Airgun:

Shooting your Airgun is always the most enjoyable part of owning an Airgun, so don’t do something stupid and turn that experience into a nightmare. Treat your Airgun as if it is deadly at all times, never point it at anything you do not intend on shooting.

Keep your safety on until you are ready to shoot. Never put your finger on the trigger until you are ready to shoot it and only shoot it in a safe location with an appropriate background and backstop.

Think of the barrel of your Airgun as a light saber that if it crosses even your arm, it could cut it off. Even a BB to the arm is a serious matter. I had a friend that shot himself in the arm with a BB Gun and the BB lodged in the tendons of his wrist requiring an operation to remove it. He was a violin player so this could have ended his violin playing, but luckily he was OK.

When Your finger is not on the trigger it should be held across the trigger guard in a straight position to ensure no accidental misfires.

Wear eye protection, Steel BB’s will bounce back when they hit a hard surface and can come back with enough force to injure an eye easily. Generally Airguns do not require ear protection but some can be loud enough that you may want to wear some sort of ear protection as a precaution.

Only shoot with others that are responsible and take Gun Safety very seriously. Young people will need constant supervision and it is best to go through all of this first before even considering handing them an Airgun for the first time. Perhaps start them off with something like an Airsoft gun which will have less consequences if an accident were to take place.

Airguns are awesome in so many ways and allow for a similar shooting experience to a “Real Gun”. They can be used in more situations, with less overall cost and are a great way to learn proper gun handling and how to improve your shooting ability even if you are a “Real Gun” owner. Always be responsible with your Airgun not only for yourself but for others as it only takes a few idiots to ruin things for the rest of us. Don’t be that Idiot please!

Categories: Airsoft, BB, Blank Gun, Gun Law, Gun Safety, How To, Pistol, Pellet, Paintball, Real Gun, Vimeo Video Tags:

John Wayne Marshal CO2 BB Revolver FIeld Test Review

No Comments

In this performance Field Test Shooting Video for the John Wayne Marshal CO2 BB Revolver, I test out what the fps velocity is using a fresh standard 12 gram CO2 cartridge and shooting 4.5mm Steel BB’s through my Chronograph. I then setup a paper target 30 feet down range and shoot 10 rounds into it using the Single Action Only Trigger to see how tight of a grouping I can get out of the box. If you have not already watched my Table Top Video Review for the John Wayne Marshal CO2 BB Revolver, then make sure to do so for details and specifications along with some nice close up video.

First up for my velocity fps test of the John Wayne Marshal CO2 BB Revolver, I shot 5 rounds through my Chronograph. The slowest fps was 354 and the fastest shot hit an fps of 368, this result averaged 358 fps which was a somewhat under the claimed “up to” 420 fps from AirVenturi, still an OK velocity for shooting pop cans and the likes up to 30-40 feet away. The temperature in the Sea Can was about 20 degrees Celsius which is around 68 degrees Fahrenheit, so a good temperature to get middle of the road performance from a CO2 Airgun like the John Wayne Marshal CO2 BB Revolver. In warmer temperatures you can expect higher velocities…

I then placed my paper target on my pellet trap 30 feet downrange and using my standard semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back), I proceeded to shoot 10 rounds into the target with the John Wayne Marshal CO2 BB Revolver and I was able to get about a 4 inch grouping well centered up and down but pushed to the left about 3 inches. I am not sure why this shot grouping spread out so much for me as my Crosman Forty Filed Test Review gave me a much better grouping and these guns are literally the same gun with different branding being the only real differences. Maybe I was just off on this day? Hey it happens sometimes!

The John Wayne Marshal CO2 BB Revolver is a lower cost mostly plastic Single Action Army Revolver with a fair amount of plastic in the build, but it does feel fairly well built and fairly solid other than being a bit lighter weight. It should produce close to 400 fps velocities in warmer conditions which is more than enough for plinking and pop can shooting which is really what it is built for. I do have to mention that this John Wayne Marshal CO2 BB Revolver for whatever reason is double the price of the Crosman Fortify CO2 BB Revolver I reviewed earlier, so if you don’t care about the John Wayne Licensing, than maybe consider the Crosman version for a lower priced option.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Review, Revolver, Vimeo Video Tags: John Wayne Marshal, AirVenturi, Colt Single Action Army

John Wayne Marshal CO2 BB Revolver Table Top Review

No Comments

TypeBB Pistol.
Manufacturer: Distributed by AirVenturi.
Model: John Wayne Marshal.
Materials: Mostly plastic, some internal metal parts.
Weight: 1 pound (455 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.55 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 420.

Trigger Pull: The trigger pull on the John Wayne Marshal CO2 BB Revolver is a single action only trigger, so you will have to cock the hammer back with each shot which does take away most of the trigger pull length and weight, making the Marshal trigger short and light and easy to shoot. Ideal for slowed down accurate shot placement, but less effective as an action shooter unless you have a very quick thumb!

Accuracy: I have not tested out the John Wayne Marshal CO2 BB Revolver but it should perform exactly like the Crosman Fortify revolver as they are literally the exact same gun with the exception of the branding and licensing. In my Field Test Shooting Review for the Crosman Fortify CO2 BB Revolver it did shoot a little bit lower than the claimed 420 fps and shot around a 2 inch 10 shot grouping at a target setup 30 feet away. You can watch that video here but I will be making a dedicated Field Test Shooting Video for the John Wayne Marshal CO2 BB Revolver shortly…

Build Quality: When it comes to the build for the John Wayne Marshal CO2 BB Revolver, there is not a lot to get overly excited about. It is basically a mostly all plastic gun with some metal parts internally like the barrel, trigger, hammer and CO2 area. The John Wayne Marshal has that lower cost Airgun, two halves, screwed together build which generally looks better on the side without the screws showing. As it is mostly plastic it is on the light side at around just over a pound. Overall there are not a lot of moving parts so it should be reliable enough just for that reason alone. All the mechanical components do what they need to do and feel solid enough.

Realism: The John Wayne Marshal CO2 BB Revolver at a glance looks a lot like a Colt Single Action Army Revolver, it has the same shape and size but the weight is much less at about half. The lack of actual bullet  holes in the cylinder looking from the front of the revolver does take away from its realism. I guess I am really used to the new generation revolvers with working cylinders and real loadable and removable shells, but these guns are more expensive and hold less ammo as they are genuine to the 6 shooter capacity.

Pros:

  • A decent looking replica of a Colt Single Action Army revolver.

  • Single action only trigger is short and light and well suited to careful shot placement shooting.

  • 420 claimed fps is about perfect for plinking at ranges up 30-40 feet.

  • 18 round magazine has a nice high capacity and easy to load when empty

  • Safety is well thought out and built into an already existing part of the gun rather than simply adding a switch afterwards.

  • I like the look with the all back frame and bone white grips.

  • CO2 Allen key is built into grip so you always have it on hand and will not lose it.

  • John Wayne licensed for those old west John Wayne fans.

Cons:

  • Mostly plastic builds makes it a bit light in the hand.

  • No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

  • Twice the price of the Crosman Fortify which is basically the same Airgun.

Comments:
The John Wayne Marshal CO2 BB Revolver is for sure an option if you are looking for an old west single action cowboy BB shooter and specifically if you are a John Wayne fan. If you don't care about the John Wayne licensing and want to save about half of the price then my recommendation is to go for the Crosman Fortify as it is the same exact CO2 BB Revolver at the end of the day minus the john Wayne licensing on it. You also have the option of buying one of the many Shell Loading Single Action Army Revolvers available but they are a bit more money and will shoot a little slower with less ammo capacity but the trade of is a lot more realism.

Categories: 4.5mm / .177 cal, BB, CO2, Pistol, Review, Revolver, Vimeo Video Tags: John Wayne Marshal, AirVenturi

Replica Airguns June Mystery Box Unboxing

No Comments

Another box showed up at my door and this time I had no idea what was inside it, I asked the boys in the warehouse to surprise me and send some new product as I was low on review items, and in a couple of days later this tall somewhat large box showed up. In this Replica Airguns June Mystery Box Unboxing Video I open the box and take a look at what’s inside. I recommend you just watch the video and enjoy the suspense with me, but if you want to cheat and find out now, then look below at quick breakdown of each item…

Centerpoint Hornet - Recurve Compact Crossbow

  • Arrow Velocity: Up to 191 FPS

  • Foot Pounds of Energy (FPE): 12 ft-lbs

  • Limbs: 1 Piece Compression Fiberglass

  • System: Recurve

  • Draw Weight: 80 lbs

  • Length: 22.05 in

  • Product Weight: 2.32 lbs

  • Stock Material: Composite

John Wayne Marshal CO2 BB Revolver

  • Type: BB Revolver

  • Power Source: 12g CO2 x 1

  • Action: Single-action

  • Ammo Type: 4.5mm (.177) steel BBs

  • Ammo Capacity: 18 rounds

  • FPS: 330

  • Safety: Manual

Gamo GP-20 Combat CO2 BB Pistol

  • Ammunition: .177 Bb's.

  • Velocity: 400 Feet Per Second (Fps)

  • Action: Single / Double

  • Magazine: 20 Metal BB's Magazine.

  • Powerplant: CO2 12gr.

  • Barrel: Smooth Bore Barrel.

  • Slide: Non-blowback.

  • Sights: Fixed Sights With Fiber Optic Rear Sight.

  • Weight: 0.97 Lbs.

Specna Arms SA-X01 AEG Airsoft Rifle

  • AEG Airsoft

  • Overall length: 69 cm.

  • Weight: 2505g.

  • FPS: 380.

  • Hop-up: Yes.

  • Inner barrel length: 229 mm.

  • Magazine capacity: 120 rds.

  • Quick spring change system: Yes.

Specna Arms SA-J73 AK AEG Airsoft Rifle

  • Weight: 5.7 lbs

  • Overall Length: Adjustable from 23.4" to 32.6"

  • AEG Airsoft

  • FPS: 380.

  • Hop-up: Yes.

  • Inner barrel length: 400 mm.

  • Magazine capacity: 430 rds.

  • FPS (Feet Per Second): 370-380 FPS

  • Included Magazine Capacity: 500rd Hi-Cap Magazine

  • Quick spring change system: Yes.

  • Gearbox Version: V3 Gearbox

Categories: 4.5mm / .177 cal, 6mm, Airsoft, AEG, BB, CO2, Crossbow, Full Auto, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video Tags: Bara, Gamo, Specna Arms, Center Point, Hornet, GP-20, SA-J73, SA-X01, John Wayne Marshal, AirVenturi

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle FIeld Test Review

No Comments

What you can expect from this Field test Shooting Video for the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle are two things for sure. I test out the velocity with both 4.5mm Steel BB’s and .177 caliber lead pellets, I also chuck both of these rounds downrange to see if one may be more accurate than the other and how close I can get a 5 shot grouping for each ammunition type. If you are looking for details and specifications and perhaps some more close up video of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle then you may want to watch my Table Top Video for it here.

If you have watched any of my hundreds of Field Test Videos, then you already know I start off shooting 5 or so rounds through my Chronograph to see what the average velocity is going to be. In this Field Test I shoot 3 rounds of each ammo type, 3 BB’s and 3 pellets since it is a pump Airgun and they tend to be more consistent than a CO2 Airgun. Barra claims around 350 fps, I am not sure if this is for BB’s or Pellets or both? As it turns out (spoiler alert), both ammo types performed about the same in both the velocity and accuracy portion of my testing. For BB’s, my chronograph testing got 303, 316 and 316 for an average of 312 fps. For pellets my chronograph results were 309, 309, 314 for an average of 311, so only 1 fps off between the two. Keep in mind the BB’s weigh around 5.1 grain while the pellets I was using were around 7 grain, so the pellets will be carrying more energy downrange and hit a bit harder. By the way they are also harder to load so I would suggest just shooting the steel BB’s in this one since you can keep the fun times flowing better...

Next up for my accuracy test of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, I again shot both ammo types, but 5 rounds of each and just like the velocity test they matched each other almost exactly. Both the steel BB’s and lead pellets I was using shot really well centered left to right, maybe just a hair to the left and both shot just about an inch or so high on the bullseye I was aiming at 30 feet away. The 5 BB’s grouped nicely for me at about an inch while the pellets did get a slightly tighter 3/4 inch grouping for me in this test. I was using a semi rested shooting position sitting on a stool in the back with the rifle rested on a sand bag up front.

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle.

Categories: 4.5mm / .177 cal, BB, Field Test, Multi-pump, Pellet, Review, Rifle, Single Shot, Vimeo Video Tags: Barra, Barra 1866

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle Table Top Review

No Comments

Type: Lever/Pump Dual Ammo Rifle
Manufacturer: Distributed by Barra.
Model: Junior Dual Ammo Pump Cowboy Rifle.
Materials: Mostly plastic, some metal.
Weight: 4.1 pounds (1859 grams).
Total Length: 36 inches (91.44mm).
Barrel: 18 inches (45.7cm) metal rifled.
Propulsion: Pump Compressed Air.
Action: Lever/Pump
Ammunition Type: .4.5mm steel BB’s & .177 Caliber Pellets.
Ammunition Capacity: 50 BB’s in hopper, single shot Pellets.
FPS: Claimed 350-400.

Trigger Pull: The trigger pull on Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is respectable at about 5 pounds with a medium to short pull length. I would say it is perfect for novice shooters as it is not overly light so as not to go off easily by accident and not too heavy for youth shooters with less finger strength than adults. When you pull the bolt back to reload the ammo, the internal cocking mechanism is activated allowing for single action type shooting. You do need to activate the bolt with each shot.

Accuracy: My dedicated field test shooting video is planned for this week, so for now I have no idea what to expect in terms of velocity and accuracy from the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, other than it is claimed to shoot around 350 fps when using pellets. It does have an 18 inch rifles barrel which should contribute to helping a lot with accuracy, so I do have high expectations especially since it has a pretty good trigger and when looking down the sights they allow for a nice tight fix on the target. The rear stock is short but not so short that it feels cramped for an adult shooter which should also help when I perform my accuracy test.

Build Quality: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is nothing special when it comes to materials being used in it. It is for the most plastic with the exception of the inner and outer barrel along with the rear sight and I would imagine some other internal parts. It does feel not so bad as it is a bit over 4 pounds and is smaller in nature so it feels solid enough in the hand. I wish the Pump/Lever was metal as it would of felt a bit more solid and would have added a bit more additional weight to the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle. Fit and finish is good and overall the gun looks and feels good.

Realism: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything we would expect other than loading shells which is available in other Lever Action Air Rifles if you don’t mind paying a premium for one. The lever is actually not a lever but more of a pump so the action and look of the lever is not exactly as you would expect from a true lever action rifle, but when it is locked in place it does look the part. The gold receiver and rifle band looks sharp and I feel matches up with the dark imitation wood stock nicely. One point to make is that the hammer is not the hammer but actually the safety and the bolt not only opens the breach area but also acts as the cocking mechanism for the internal hammer.

Pros:

  • Super easy to pump.

  • Fit and finish looks decent for a mostly plastic airgun.

  • In terms of realism it does look like a more compact lever action rifle for the most part

  • Can shoot either BB’s or Pellets.

  • Holds 50 BB’s in the hoper for quicker follow up shooting.

  • Metal octagon outer barrel adds addition weight to a mostly plastic gun.

  • Rear sight is metal and is also adjustable for elevation.

  • Trigger pull is pretty decent, not too light but is short and about 5 pounds.

  • Recessed barrel for added realism.

  • Made for kids but the shoulder pull length and sight placement works for adults too.

  • The gold receiver looks good and gives it a unique look.

Cons:

  • Mostly plastic build.

  • Manual says only one pump but I wonder why this is the case or perhaps just to deregulate it?

  • Pellets are hard to load especially if you have larger hands and fingers.

Comments:

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is a competitor for products like the Red Ryder but it has a bit more realism in terms of looking more like a replica of a real steel Lever Action Cowboy Rifle. It also allows for shooting pellets and has an actual rifled barrel so hopefully this helps with accuracy. You can still kind of shoot it Lever Action Style when shooting BB’s but there is the addition of charging the bolt with each shot over and above working the Lever / Pump, so it will take a bit more time to get those follow up shots as compared to a Red Ryder BB Rifle. One other point to make is that the lever is actually not a lever but more of a pump since this is not spring powered but instead has an air reservoir which on this version only allows for one pump, but on the non-junior version you can pump it up to 10 times and get a claimed 800 fps out of it (US Version). I am going to try pumpkin the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle up to three times to see if there is any difference in power but this could void your warranty if you damage the air reservoir by over pressuring it. So be good and only pump yours once as instructed in the manual.

Categories: 4.5mm / .177 cal, BB, Pellet, Review, Rifle, Single Shot, Vimeo Video, Multi-pump Tags: Barra, Barra 1866

Cybergun Thompson 1911 CO2 NBB Pellet Pistol Field Test

No Comments

In this shooting velocity and accuracy Field Test Video of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to” test out what the velocity in fps using a standard 12 gram CO2 along with 7 grain .177 caliber lead pellets shooting 5 rounds through my Chronograph. The claimed fps for this pellet shooter is 332, not sure if that is with lead or alloy pellets? I then setup a fresh paper target 30 feet down range here in the Sea Can and shoot 6 rounds into it using a semi rested shooting position to find out if the Cybergun Thompson 1911 CO2 NBB Pellet Pistol can get all 6 rounds out the barrel and if it can place them any where near the bullseye out of the box. And if it can also get a decently tight grouping. If you have not already watched my Table Top Video Review for the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, then make sure to check that one out for details, specifications and some nice close up 4k video. It is a pretty sweet looking Airgun!

First, my velocity test of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to shoot” 6 rounds through my Chronograph and then averaged them all out as I do in all my Field Test Shooting Videos. I did not have a lot of success with my first choice of pellets and pretty much got a jam right away. I then switched up the pellets and I was able to get 5 out of the 6 rounds in the one side of the rotary mag through my Chronograph and here where the results… The slowest shot was 206 fps while the fastest shot hit 251 fps, this averaged 231 fps which was kind of far off of the claimed 332 fps. Maybe the claim is for light weight alloy pellets? I don’t know? To be honest I was just glad to get a result as I was not having a lot of luck with the rotary magazine working for me all that well.

I then tried my luck again and placed a fresh paper target 30 feet downrange and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back). Luck was on my side as a succeeded to place all 6 rounds into the target with no jams this time! The Cybergun Thompson 1911 CO2 NBB Pellet Pistol did alright in terms of accuracy placing 4 shots all within about an inch and a half well centered just a bit high of the bullseye. Two shots did drop down as they seemed to come out underpowered compared to the other 4 shots which does explain why they dropped a bit on the target. This did stretch out the grouping to closer to around 4.5 inches.

Rotary pellet magazines are for sure never as consistent as vertical stick type magazines shooting round BB’s. There is always going to be some jamming that happens especially if the pellets you pick do not fit perfectly. Once I found a pellet the Cybergun Thompson 1911 CO2 NBB Pellet Pistol liked a bit more, I did have better success with only the occasional jam. Power was not great as you saw with my velocity test. Accuracy was for sure much better and if the velocity was more consistent then I am positive 1.5 to 2 inch groupings would be possible! The trigger is OK but loaded up with pellets does tend to drag a bit more than when empty and make you work a bit harder with that trigger finger, but it does get the job done. The best part about the Cybergun Thompson 1911 CO2 NBB Pellet Pistol would be its looks and how it feels in the hand for sure, the stainless finishes gives it a quality look so if looks are more important than performance and you want a sweet looking stainless 1911, this may be your pick.

Categories: 4.5mm / .177 cal, CO2, Field Test, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Cybergun, M1911, Thompson Custom 1911