Type: Lever Action Rifle Manufacturer: Distributed by Umarex. Model:Marlin Cowboy Lever Action BB Rifle. Materials: Metal and plastic. Weight: 2.59 pounds (1.2kg). Total Length: 36.69 inches (93.2cm). Barrel: 16 inches (40.6cm) metal rifled. Propulsion: Spring. Action: Lever. Ammunition Type: 4.5mm steel BB’s. Ammunition Capacity: 650 in hopper. FPS: Claimed 300.
Trigger Pull: The trigger pull on Umarex Marlin Cowboy Lever Action BB Rifle is just about right for a rifle like this at 5 pounds with a medium to short pull length. I would say it is perfect for just about all shooter including novice shooters as it is not overly light, so as not to go off by accident and not too heavy so as to affect your accuracy. The Umarex Marlin Cowboy Lever Action BB Rifle trigger is considered a single action only trigger as it is only active after each cycle of the lever action which also is required to chamber a BB round.
Accuracy: My dedicated field test shooting video will be coming up over the next couple of weeks. So for now I have no idea what to expect in terms of velocity and accuracy from the Umarex Marlin Cowboy Lever Action BB Rifle, other than the claimed 300 fps which is what you can expect from the similar Red Ryder BB Rifle. Accuracy in general for a BB Rifle like this can be hit or miss. From past shooting experiences testing out the Red Ryder and first version of the Crosman Marlin Cowboy BB Rifle, they both shot decent from about 30 feet away, but I would have to say the Red Ryder did perform more consistently getting a tighter grouping than the Crosman Marlin Cowboy. Hopefully this Umarex newer version performs up to par.
Build Quality: The Umarex Marlin Cowboy Lever Action BB Rifle has overall good build quality with a metal barrel, receiver, rear sight and lever. The stock is plastic along with the front sight and the trigger but it does look and feel well made with all the mechanical parts feeling solid and tight. It does feel much heavier in the hand than the claimed 2.59 pounds. I would have preferred a metal trigger, not sure why Umarex went with a plastic trigger?
Realism: The Umarex Marlin Cowboy Lever Action BB Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything one would expect other than loading shells which is available in other CO2 poweredLever Action Air Rifles if you don’t mind paying a premium for one of them. The lever does not work the cycling of the bolt but rather it pre-cooks the internal spring that provides the air pressure and power. The lever does load a single 4.5mm Steel BB with each crank of the action. I do like that the Umarex Marlin Cowboy Lever Action BB Rifle has a full shoulder pull stock more suitable for larger shooters which does all add to the realism rather than having a super short rear stock.
Pros:
Easy to pump.
Fit and finish looks good for an inexpensive Airguns, seems very well made.
In terms of realism it does look like a classic old west lever action rifle for the most part.
Holds 650 BB’s in the hopper for quicker follow up shooting and virtually unlimited ammo.
Official Marlin licensing and branding via Umarex.
Rear peep sight is metal and is also adjustable for elevation.
Trigger pull is pretty decent, not too light but is medium-short and about 5 pounds.
Metal lever feels a lot better than as plastic one and will be more durable.
Shoulder pull length is much longer than a standard kids type Red Ryder BB Rifle.
Plastic stock has nice texturing that helps with grip and looks.
Cons:
No sight adjustments for windage.
Overall Power is lower than other CO2 BB and Pellet Rifles but still is adequate for it’s intended purpose.
Would have liked a metal front sight and trigger.
Comments:
The Umarex Marlin Cowboy Lever Action BB Rifle in my opinion is really built for adult shooters that want to join in on the fun with perhaps their kids or other youth shooters shooting something like a Red Ryder. The longer shoulder pull feels a lot more natural for larger shooters and I do feel like the Umarex Marlin Cowboy Lever Action BB Rifle just feels a bit more like a full size Lever Action Rifle. Performance wise, I dolt think we are going to see anything much different than what we are already getting from a standard Red Ryder or first generation Marlin Cowboy BB Rifle. That’s really OK since this type of rifle is made for good old fun, blasting pop cans and plastic army men with a friend. And with some time shooting one you can get pretty accurate with one of these BB rifles too.
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
Type:AEG Airsoft Rifles Manufacturer: G&G. Model:RK Beta AK Materials: Mostly metal/some plastic. Weight: 7.1 pounds (3.2 kg). Total Length: 28.5 inches (72.4 cm). Barrel: 9 inches (22.9 cm) barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: 6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 600 round magazine. FPS: 390 fps.
Trigger Pull: The trigger pull on the G&G RK Beta AK AEG Airsoft Rifle is short and light as it is basically a simple electric on/off switch that completes a circuit and tells the motor to turn, which activates the cycling of the spring piston. For this reason there is no real creep or feel of a release. When you get to a preset point in the trigger, the motor circuit is closed allowing for either semi or full auto, depending on your selector switch position at the time.
Accuracy: I will be making a dedicated Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle to find out what the actual velocity is in fps. I will also test what kind of accuracy I can get shooting a paper target in both semi and full auto from 30 feet away. For now I have no idea what to expect but as this is most certainly not a cheap Airsoft AEG Rifle, I am hoping for good results to justify the higher price point.
Build Quality: The build quality of the G&G RK Beta AK AEG Airsoft Rifle is very good, G&G Airsoft Rifles in general are well built. You are going to find metal in most of this AEG Airsoft Rifle including the receiver, dust cover, trigger guard, trigger, selector switch, barrel, front and rear sights and the magazine. The only plastic to be found will be in the pistol grip, rear stock and 3 of the picatinny rails. Fit and finish is very good but the stock and pistol grip material does seem to show scratches really easily.
Realism: The G&G RK Beta AK AEG Airsoft Rifle is a 1 to 1 scale Airsoft reproduction of the AK 47/74 in a compact modernized version. I don’t believe it is based on exactly one specific brand or type of AK 47 or AK 74, but is more or less a stylized version designed and built by G&G. The G&G RK Beta AK AEG Airsoft Rifle does have a lot of metal and weight to it adding to the realism and most of the mechanical parts work similar to a real steel version of an AK 47/74. G&G has added a bit of a bolt cycle motion with a motor that actuates it to some degree but this is not like the look and feel of a real internal bolt from an actual AK 47/74. Still a nice touch.
Pros:
Lots of metal in construction where you need it with good overall weight and feel.
6 rail attachment options up front for lots of mounting positions.
Left side option to attach an additional AK style sight mount.
Adjustable front sight for elevation.
Nice and compact for easy maneuverability.
Rear stock has lots of room for battery sizes and options.
Dust cover comes off for easy access to internals.
G&G high quality build.
Comes with sling mounting options.
Super easy hopup adjustment slider.
Nice high capacity 600 round metal magazine.
No orange tip.
Cons:
Rear sight is all but useless.
Stock and grip scratch really easily.
Priced on the higher side.
Comments:
The G&G RK Beta AK AEG Airsoft Rifle may be priced a bit on the high side for some people but it is a solid AEG Airsoft Rifle and it seems there are not as many AK options out there so it is nice to have an offering from G&G. I like the almost full metal construction and I find the modernized styling and compact size to be appealing and would make it a great option for CQB Airsoft games. I am not sure what is going on with the rear site, as it looks like it is a sight, but does not have the sight grove in it? Maybe I am missing something here but other than opting to put a red dot way up front, your only other option is to put an AK side rail and mount a sight on the rear just above the metal dust cover. I am hoping when I make my Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle, it performs well for me to justify the higher price point.
My Vimeo Table Top Review for the G&G RK Beta AK AEG Airsoft Rifle:
In this Field Test Shooting Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle, I get to test out a Replica .22 Caliber CO2 Rifle which I don’t get the chance to do so very often and .22 caliber combined with a Replica in a an Airgun is very uncommon! Well today I got to test one out and it was a lot of fun, I would say it performed very well for me. As usual, my main goal is to find out what the real world velocity is in fps and also to see how accurate the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is shooting at a paper target 30 feet away. Also make sure to checkout my Table Top Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for more details and specifications and close up video.
First in my to-do list was the velocity portion of my Field Test, and so I loaded up dual 12 gram CO2 cartridges into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle along with 10 preloaded .22 caliber shells. By the way I was using Gamo 15.43 grain (1 gram) lead pellets and the temperature was just a bit below room temperature, so not 100% ideal for maximum velocity but still warm enough for my purposes. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shot an average 5 shot velocity of 390 fps with the fastest shot hitting 411 fps and the slowest performer hitting 370 fps. That works out to 5.78 average foot pounds of energy.
Next up, I first recovered the 5 ejected shells I used in the velocity test, and again reloaded them with some more pellets and then back into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for my accuracy test. Keep in mind with a lever action rifle, I have to remove the rifle from my shooting position each time to work the lever action and chamber a round. This does cause me to have to fully reset for each shot which does kind of break a shooting grove just a bit, but it did not seem to make much of a difference as my accuracy results where still very good. I did notice vertically the grouping was about 2 inches while side to side it was closer to 1 inch. I attribute this to the sighting system as it was hard for me to focus on the rear sight and make sure I had it perfectly level with the front sight for each shot, which would account for some variation in elevation. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle was also shooting about 2 inches high from my aim point.
I have said this a bunch of times before, but I do really love shooting lever action rifles. Even a low cost Red Ryder BB Rifle brings a smile to my face. I also have a Henry Lever Action 22LR that I also really enjoy shooting when I get the chance. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is a really sweet looking rifle that performs as good as it looks thankfully! It’s also well priced for what you get in my opinion at just under $300 Canadian at the time of this video. If you want a fairly powerful Replica Air Rifle that hits hard and true and is super fun to shoot then get this one but make sure to get a bunch of extras shells cause they like to disappear on you pretty quickly. For now I still have all 10 of mine but they love to hide in the craziest places when they get ejected :)
In this Indoor Field Test Shooting Video, I put the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol through my usual performance shooting test by first finding out what the velocity is by shooting 5 rounds through my Chronograph using a fresh CO2 along with .20 gram Airsoft BB’s. I follow this up with a 10 round accuracy test, again using .20 gram Airsoft BB’s and shooting at a paper target setup 30 feet down range, while seated on a stool in the back with my hands rested on a sand bag up front. This generally works pretty well and helps me get the most out the gun I am testing. If you are also interested in details and specifications than make sure to watch my Table Top Video I already made for the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol.
So how did the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol do in my testing? Not bad! Starting with the velocity fps test I shot 5 rounds through my chronograph with a brand new 12 gram CO2 cartridge and while EMG claims around 400 fps, I only averaged 321 fps with my fastest shot hitting 323 fps and my slowest shot hitting 318. So relatively close in terms of fps but not close to the 400 claimed fps. Totally fine for Airsoft games, perhaps in super hot temperatures, it can do better but in standard room temperatures this is what I got.
Next up I tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol’s accuracy from 30 feet away and put 10 rounds down range as best as I was able to do with my slightly aging eyes. I was happy with the results with most of the rounds staying within about 2 inches of each other and just slightly to the right of the bullseye, but pretty much perfect in terms of elevation. There where a couple of rounds that came outside of the base 2 inch grouping, which increased the grouping to about 3 inches total.
I am a huge 1911 fan and so a 2011 design only tuns up the dial that much more. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol performed without a glitch for me and I love the extra heft and snappy blowback action along with the crips light and short single action 1911 trigger. I was a bit surprised by the lower 323 fps velocity, but to be honest this is more than a capable velocity for a combat close range Airsoft Pistol. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a real looker for sure, it just needs that eye soar of an orange tip removed to perfect its look. If you like the look and feel of a 1911/2011 in your hand, and if stainless steel is your color of choice, then I would say go for this one.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
Trigger Pull: The trigger pull on the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is light short and crips with just a little bit of take-up before it releases. You will have to first either work the lever action which also chambers a preloaded shell into the breach of the barrel, or you will have to pull the hammer back in order for the trigger to be active as a single action trigger.
Accuracy: At this time I have not made my Field Test Shooting Video or shot the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. I am really looking forward to testing it out when I make my Filed Test Shooting Video Review for it hopefully soon! Barra claims is will shoot .22 caliber pellets up to 410 fps. I am not sure if this is for mid grain or light grain pellets but we will find out again when I make my shooting review video. The rear sight does have three positions of elevation so I should be able to find one that works here my Indoor Sea Can Airgun range where I setup paper targets at 30 feet away. I am hoping the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shoots close to the bullseye out of the box as it does not have any windage adjustment to space of.
Build Quality: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle seems to very well built and has a lot theft to it weighing in at 6.5 pounds so it feel very solid to hold and shoulder. It is mostly all metal which from what I can see, only the stock is plastic rather than actual wood. The faux wood does look very real and unless you get in close to it and notice none of the real wood imperfection, then you can figure out it is emotion wood. The fit and finish is all quality and I expect the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle to perform reliably.
Realism: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is based on the Winchester 1866 Lever Action Rifle and does look the part with all the expected working parts found on a lever action rifle. Barra has included a thumb safety behind the hammer along with a grip safety that requires the shooter to hold the lever tight to the stock or you will not be able to pull the trigger. Being a shell loading design that requires preloading pellets into the shells and then loading those shells into the rifle tub magazine also makes the experience feel very real. Barra has done a great job hiding the CO2 being the butt plate and the barrel open is about the diameter of a 45 caliber bullet.
Pros:
Not many rifles come in .22 Caliber. Should have a bit more down range power over .177 caliber.
Almost all metal construction with good weight and feel to it.
The Faux Wood stock looks very realistic, hard to tell it’s plastic!
Octagonal recessed barrel adds to realism.
White writing is mostly under the barrel so fairly discreet.
The gold receiver and but plate add to the look of quality.
Rear sight has three positions for different ranges and sighting types (standard low, peep mid, high distance).
Also have the option of mounting a red dot or magnified optical sight on the rear compact picatinny rail.
Dual 12 gram CO2 system is less expensive and reduces the cool down effect while allowing for lots of pellet reloads between heaving to change the CO2.
Has a secondary safety on the lever, it must be pressed into the stock to shoot, kind of like a grip safety.
Claimed 410 fps should be more than sufficient for mid range shooting.
Lever action rifles are just so much fun to shoot!
Cons:
Rear sight is not adjustable for windage.
More than likely going to lose some shells if you are shooting outside in the yard as they all eject into the grass or who knows where? Will probably need to buy some backup shells over time.
You will have to hold the lever snug to the stock or the trigger will not work.
Comments:
I was super excited this year at SHOT Show when I went to the Barra Booth and the Barra Team showed me their new Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. We also spoke about how the .22 caliber version shoudl be Canada friendly as it was under 500 fps. Here we now and I finally got my hands on one and it is nice to have a .22 Caliber Replica CO2 Lever Action Rifle available to us Airgun Collectors. Sure Umarex has their Legends CO2 Shell Loading BB Rifle but I like The Barra 1866 shooting pellets over BB’s. Price point for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is very reasonable for what you get as it is a lot of gun for the money. I am really looking forward to seeing how well it shoots and if it can get close to the claimed 400 fps.
My Vimeo Table Top Review for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle:
Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…
Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.
In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.
First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.
The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.
Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.
The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.
I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.
Type:AEG Airsoft Rifles Manufacturer:Umarex. Model:Elite Force M4 CFRX Materials: Mostly plastic/some metal. Weight: 5.2 pounds (2360 grams). Total Length: 32.4-35.4 inches (820-900mm). Barrel: 16.1 inch (410mm) barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: 6mm plastic Airsoft BB’s (Eye Trace compatible). Ammunition Capacity: Mid/High cap 340 round magazine. FPS: 370-400 fps.
Trigger Pull: The trigger pull on the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle is fairly short and light as it is basically a simple on and off switch as it is not mechanical but rather electrical. For this reason there is no real creep or feel of a release. When you get to a point in the trigger you close a circuit that activates the electric motor cycling the spring shooting in either semi or full auto depending on your selector switch position at the time.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle, I am planning to make a video for this rifle at the end of this week if all goes as planned. I do not have any of the “Eye Trace” Airsoft Ammo to show how this works and looks but I will be able to do my traditional accuracy and velocity testing here in the Replica Airguns Indoor Sea Can Airgun Range. When I do get access to some of the Eye Trace Airsoft Ammo I will make a short video most likely in a lower light situation to show how it looks.
Build Quality: The Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle does have a lot of plastic in the build including the upper and lower receiver, hand guard, rear stock, front and rear sights, grips and flash hider but as expected there are metal part where they are required as in the inner and outer barrel, magazine, buffer tube, trigger, selector switch, magazine release, charging handle, dust cover and of course many internal parts. It does have a decent weight to it being a fairly long AR and so it feels solid enough. I would have liked to have seen metal sights and perhaps a metal receiver since it is not a cheap or inexpensive AEG Airsoft Rifle.
Realism: The Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle is based on the M4/M16 platform of course in a modern version with all the tactical additions. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of it. The addition of the Tracer element will add to the realism when shooting it in low light situations, but so far I have not tested it as I do not have any Eye Trace Ammo on hand.
Pros:
Eye Trace System unique and great in low light situations.
Lots of accessory mounting options with Picatinny top rail and side adb bottom M-LOK.
Full adjustable Pop-up sights.
Pre-installed MOSFET for improved electronic performance.
Ver 2 Full Metal, fully upgradeable gearbox.
6 position adjustable AR compatible type rear stock.
I like the two tone black and tan finish.
Has the Elite Force Branding from Umarex.
Easy to get at adjustable Hop-up.
Cons:
Plastic receiver and orange tip.
Battery options limited due nunchuck compatible space.
Pop-up removable sights are plastic.
Comments:
Umarex introduced the “Eye Trace” line of Airsoft Rifles at SHOT Show this year and I have been somewhat eagerly awaiting getting my hands on one to try this new system out, but unfortunately we do not have any of the Eye Trace Airsoft Ammo to do that with. I am not sure if Umarex is low on supply or perhaps it was missed in the order? Either way I will be testing out the new Eye Trace Airsoft Ammo when I get my hands on some. in the future. Just to be clear on how this works, the Eye Trace Ammo is florescent and these New Eye Trace Airsoft Rifles have a blue light you can turn on or off that activated the florescent Airsoft Rounds illuminating them to look like tracer rounds coming out of your barrel. The new Eye Trace Airsoft Rifles work just like a standard AEG Airsoft Rifle when using normal Airsoft BB’s, so I can test the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle as I always do so stay posted for my Official Field Test Shooting Video for it coming out very soon.
My Vimeo Table Top Review for the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle:
Here is Bonus Video Five in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this Fifth Bonus Full Auto Fun Video I bring out a past Full Auto Fun Airgun that I just couldn’t resist takin out for some full auto fun once again. The WE AK74UN Gas Blowback Full Auto Airsoft Rifle has got to be one of the hardest blowback Airguns I have shot, I would say even a bit more blowback feel than the KWA Mini UZI! The WE AK74UN Gas Blowback Full Auto Airsoft Rifle also does a great job of keeping Airsoft BB’s on target even in full auto with all that recoil as you will see in this video as I dial it in part way through my walk about. Unfortunately we do not sell anything like this anymore at least in Airsoft, the closest thing to it is the Crosman AK1 Blowback CO2 Full Auto BB Rifle which is still a lot of fun with a bit less recoil but a higher rate of fire.
Here is video four in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this fourth Full Auto Fun video, I retest the Barra 400e 4.5mm BB AEG Full Auto BB Rifle in full auto this time, and try a bit of a different camera angle approach with my HoverAir Drone Camera switching it to follow mode as it doesn’t stop recording so easily in this mode. And as expected, it worked a lot better for me with this setup and continued recording the entire video. I also recoded using my Meta Glasses to get the first person view and like the other videos I placed my Insta360 X4 camera on the barrel again to get some cool up front gun angle shots. I think this setup works well and will probably use it for future Full Auto Fun Videos where I am running around the yard shooting stuff. Maybe there will be a couple more bonus guns in this years Full Auto Fun Series? No promises!
Here is video two in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this second Full Auto Fun video I test out the classic KWA Mini UZI Blowback CO2 4.5mm BB Machine Gun, at least with this video I did actually shoot in full auto but the video did not go without a few hiccups as my HoverAir Drone decided I was stopping for too long to take my shots and turned itself off a couple of times. And my Meta Glasses decided to get chunky on me and lower their frame rate down to a rather hard to watch frame per second. I did eventually make it though this video but it cold have gone better. No I am not redoing this one as it was shot in Full Auto this time which is what I promised. I can not promise all my tech gear will cooperate exactly s expected but I was able to get some decent footage overall if you can ignore the choppy video for the Meta Glasses for part of the video.
I try to make at least one series of Full Auto Fun video each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this first Full Auto Fun video I start with the Barra 400e 4.5mm BB AEG Full Auto BB Rifle, but in the all the camera and audio setup confusion, I forgot to put it in Full Auto (getting old), so this is really not a Full Auto Fun Video, it was still fun and I hope you enjoy it anyway. The other videos in this Full Auto Fun Series are for sure in Full Auto and I will be taking out the Barra 400e and give it another go in Full Auto this time so stay posted for the true Full Auto Fun Video for the Barra 400e shortly!
In this Field Test Shooting Video, I test out the Specna Arms Core SA-J73 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to see what the velocity/fps is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I shoot in both semi and full auto at a paper target setup 30 feet down range. If you are more interested in information like details and specifications for the Specna Arms Core SA-J73 AEG Airsoft Rifle, then make sure to watch my Table Top Video I already made that also includes some nice close up video for you to check out…
First up I loaded up a mag of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph to get a baseline average. Specna Arms claims around 370-380 fps using the preinstalled internal spring setup. I averaged 382 fps with my slowest shot recording 379 fps and my fastest shot hitting 383 fps. All of them really close in terms of velocity and right on the mark of the claimed 370-380 fps using .20 gram Airsoft BB’s.
With the Velocity Test in the bag, I moved on to my Accuracy Test for the Specna Arms Core SA-J73 AEG Airsoft Rifle where I first shot 10 rounds in semi auto to see how tight of a grouping I could get, and then I also finished up the rest of the partially full magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto rocking around. For my 10 shot semi auto grouping I did get around a 1 to 1.5 inch spread, and notably all 10 shots hit the bullseye with no sight adjustments out of the box. Unleashing the Specna Arms Core SA-J73 in full auto, the group did spread out just a little bit to around 3 inches or so, but again right on top of the bullseye for the most part. Very impressive results for sure!
Overall I am super impressed with the Specna Arms Core SA-J73 AEG Airsoft Rifle! At around $200 Canadian you get a well made decent quality AEG Airsoft Rifle that not only looks and feels really good, but performs as good if not better than some much more expensive AEG Airsoft Rifles out there. All you really need to get on top of this purchase would be a decent charger and battery setup along with some quality Airsoft BB’s and then you are ready to go. No need for any more upgrades at least not right away. So if you are looking for an affordable AK type AEG Airsoft Rifle with no real compromises to speak of, look no further than the Specna Arms Core SA-J73 AEG Airsoft Rifle. Not much else will be a better option in this price range.
In this Field test Shooting Video, I test out the Specna Arms Edge SA-X01 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to find out what the velocity is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I also shoot in both semi and full auto at a paper target setup 30 feet away. If you are more interested in details and specifications for the Specna Arms Edge SA-X01 AEG Airsoft Rifle then make sure to watch my Table Top Video I have already made that also has some nice close up video for you to check out…
So first up I loaded up a mag full of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph. Specna Arms claims around 380 fps using the preinstalled spring setup, I averaged 348 with my slowest shot recording 344 fps and my fastest shot hitting 351 fps, so all of them pretty close in terms of velocity but a bit under the claimed 380 fps using .20 gram Airsoft BB’s
With the Velocity Test completed I moved on to my Accuracy Test for the Specna Arms Edge SA-X01 AEG Airsoft Rifle Field where I not only shot 10 rounds in semi auto to see how tight of a grouping I could get, I also finished up the 120 round magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto shake. For my 10 shot grouping I did get around a 2 inch spread, I did notice the Specna Arms Edge SA-X01 AEG Airsoft Rifle shot really low and a bit to the right out of the box. I would say about 8 inches low and 3-4 inches to the right. There is some sight adjustment you can do so you should be able to dial in the sights to your personal preference. When I switched over to full auto which is always more enjoyable with AEG Airsoft Rifles, the grouping did open up a bit but not a lot more, maybe as much as 4 inches but I did put close to 100 rounds additionally into the target.
Overall I am impressed with the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I would have liked to have seen it shoot a bit closer to the bullseye out of the box using the iron sights, but personally I would more than likely add a red dot sight anyway, and that will correct any sighting problems one may have with this Airlift Rifle. The FPS is I would say about perfect for most Airsoft shooting conditions and it can be used with the pre-installed spring either for CQB or out door games. I do like the 120 round magazines as there is no need to whined a spring half way through a magazine but you will need more magazines on hand or a good speed loader handy for an Airsoft Battle. Just keep in mind your battery options will be limited due to the battery area being rather small since this very compact AIrsoft Rifle does have limited space to put a battery.
Type: AEG Airsoft Rifles Manufacturer:Specna Arms. Model:Edge SA-X01 Materials: Mostly metal/aluminum. Weight: 5.52 pounds ( 2.50 kg). Total Length: 23.5-27 inches (597-686mm). Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 380 round magazines. FPS: 380 fps with installed spring, included M90 spring will be lower fps.
Trigger Pull: The trigger pull on the Specna Arms Edge SA-X01 AEG Airsoft Rifle is fairly shot and light, it is basically a simple off off switch as it is not mechanical but rather electric. For this reason there is no real creep or feel of a release. When you get to a point in the trigger you close a circuit that activates the electors motor cycling the spring.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I am planning to make a video for this rifle next week if all goes well. I have reviewed other Specna Ames Core products in the past and made Field test Videos for them so perhaps check one of those videos out in the time being for a bit of a heads up of what you can expect from the Specna Arms Core SA-J73 AEG Airsoft Rifle.
Build Quality: Specna Arms Airsoft Rifles are made of good quality no matter if you go with the Core or Edge versions. You will still get a quality product with quality materials and metal parts where you need them. The Edge Series offers upgrades like more metal parts, improved gearboxes and electronics along with additional accessories but you pay a bit rmeo for the added quality and add ons.
Realism: The Specna Arms Edge SA-X01 AEG Airsoft Rifle is based on the AR15 or M16 platform of course in a very modern compact PDW styled. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of your Specna Arms Rifle.
Pros:
Very high quality product with quality components throughout (Already listed in Specifications).
4 positions rear stock.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Almost all metal build.
Removable fully adjustable pop-up sights.
No orange tips on our Canada Store versions.
Lots of rial mounting options using M-LOK System..
Comes with a fore grip and deans connector and two magazines.
Easy access to motor for any possible trouble shooting you any need to do.
I love the compact size. perfect for close closer quarters situations.
Cons:
Much higher cost than Core Series.
Magazine capacity is low but comes with two magazine.
You will need a very specific compact battery setup for this Specna Arms model.
Comments:
I for sure like the look of the Specna Arms Edge SA-X01 AEG Airsoft Rifle, but more than that you get a really great Compact PDW Airsoft Rifle at a reasonable price with a ton of quality components and a mostly all metal build. Specna Arms even includes an additional magazine in the box. You could go with one of their Core series of Airsoft Rifles in a similar PDW and save a bit of money but if you can afford the upgrade then I would go for this version as you will not need to upgrade it in the future and that alone will save you some money over time. I would suggest adding a couple Lipo batters and a good charger to your shopping cart and maybe even an couple more magazines.
My Vimeo Table Top Review for the Specna Arms Edge SA-X01 AEG Airsoft Rifle:
Type: AEG Airsoft Rifles Manufacturer:Specna Arms. Model:Core SA-J73 Materials: Fiberglass reenforced plastic and metal/aluminum. Weight: 5.7 pounds (2.59 kg). Total Length: 23.4 - 32.6 inches (594 - 828mm). Barrel: 15.7 inch (399mm) inner 6.03mm tight bore barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 430 round magazine. FPS: 370-380 fps with installed spring, included M90 spring will be lower fps.
Trigger Pull: The trigger pull on the Specna Arms Core SA-J73 AEG Airsoft Rifle is similar to a light single action trigger as essentially the trigger is non-mechanical, but rather it is more like an electrical on off switch. There is a little bit of take up with virtually no extra friction to let you know when the release is, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Core SA-J73 AEG Airsoft Rifle, I am planning to make this video for next week if all goes well. I have reviewed other Specna Ames Core products in the past and made Field test Videos for them so perhaps check one of those videos out in the time being for a bit of a heads up of what you can expect from the Specna Arms Core SA-J73 AEG Airsoft Rifle.
Build Quality: One thing I can say, is no matter if you get the Core or Edge version of the Specna Arms AEG Air Rifles, you are getting extremely good value for your money, and neither one is going to have any low quality parts in it. Even the lower cost Core Series will have fiber glass reenforced plastic and metal parts along with a metal gearbox and virtually almost the same build as the more premium and higher priced Edge Series. You will get upgrades in the Edge Series like an aluminum receiver and buffer tube, a GATE X-ASR Mosfet, upgraded Gearboes, and an additional magazine.
Realism: The Specna Arms Core SA-J73 AEG Airsoft Rifle is based on the AK platform with a bit of a more modern look to it which includes a synthetic folding stock, a sight mounting system and a more modern magazine design. The Specna Arms Core SA-J73 AEG has lots of metal parts in it and has a good overall weight and feel to it which make is not too heavy or too light in my opinion. Our Canada version even come with a black flash hider rather than orange one which helps with realism.
Pros:
Very affordable price ($200 at time of video), yet very high quality product for what you pay.
Quality components throughout both the Core and Edge series.
Precision barrel internal 6.03mm diameter.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are fiberglass reenforced making them very durable.
Rear sight is adjustable on the fly for elevation.
No orange tips on our Canada Store versions.
Side mounting option for an optical or red dot sight system.
Metal V3 Gearboxes with metal gears and mostly all metal parts inside.
Decent amount of space for a battery.
Weight is about perfect, may actually too heavy with metal receiver?
Cons:
Plastic receiver.
Need to remove dust cover and use a screwdriver to adjust the hop-up.
No battery or charger included.
Comments:
The Specna Arms Core SA-J73 AEG Airsoft Rifle for right around $200 is not what I would expect for such a lower priced more entry level Airsoft Rifle. The build quality and components in this Airsoft Rifle are not budget by any means and when you hold it, it feels like a very high quality product. Sure you don’t get a battery or charger with it which you often find bundled with lower cost Airsoft Rifles, but generally these batteries and chargers are extremely entry level and will require upgrading almost immediately. So do yourself a favor and invest in a good battery setup if you do not already have one. If you’re in the market for an AK based AEG Airsoft Rifle and have a limited budget but still want a decent product, then I would recommend the Specna Arms Core SA-J73 AEG Airsoft Rifle for sure.
My Vimeo Table Top Review for the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle:
Another box showed up at my door and this time I had no idea what was inside it, I asked the boys in the warehouse to surprise me and send some new product as I was low on review items, and in a couple of days later this tall somewhat large box showed up. In this Replica Airguns June Mystery Box Unboxing Video I open the box and take a look at what’s inside. I recommend you just watch the video and enjoy the suspense with me, but if you want to cheat and find out now, then look below at quick breakdown of each item…
What you can expect from this Field test Shooting Video for the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle are two things for sure. I test out the velocity with both 4.5mm Steel BB’s and .177 caliber lead pellets, I also chuck both of these rounds downrange to see if one may be more accurate than the other and how close I can get a 5 shot grouping for each ammunition type. If you are looking for details and specifications and perhaps some more close up video of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle then you may want to watch my Table Top Video for it here.
If you have watched any of my hundreds of Field Test Videos, then you already know I start off shooting 5 or so rounds through my Chronograph to see what the average velocity is going to be. In this Field Test I shoot 3 rounds of each ammo type, 3 BB’s and 3 pellets since it is a pump Airgun and they tend to be more consistent than a CO2 Airgun. Barra claims around 350 fps, I am not sure if this is for BB’s or Pellets or both? As it turns out (spoiler alert), both ammo types performed about the same in both the velocity and accuracy portion of my testing. For BB’s, my chronograph testing got 303, 316 and 316 for an average of 312 fps. For pellets my chronograph results were 309, 309, 314 for an average of 311, so only 1 fps off between the two. Keep in mind the BB’s weigh around 5.1 grain while the pellets I was using were around 7 grain, so the pellets will be carrying more energy downrange and hit a bit harder. By the way they are also harder to load so I would suggest just shooting the steel BB’s in this one since you can keep the fun times flowing better...
Next up for my accuracy test of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, I again shot both ammo types, but 5 rounds of each and just like the velocity test they matched each other almost exactly. Both the steel BB’s and lead pellets I was using shot really well centered left to right, maybe just a hair to the left and both shot just about an inch or so high on the bullseye I was aiming at 30 feet away. The 5 BB’s grouped nicely for me at about an inch while the pellets did get a slightly tighter 3/4 inch grouping for me in this test. I was using a semi rested shooting position sitting on a stool in the back with the rifle rested on a sand bag up front.
The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle.
