Type: Revolver CO2 Airsoft Pistol. Manufacturer: Distributed by Umarex. Model:Smith & Wesson 629 Competitor. Materials: Mostly all Metal. Weight: 3.3 pounds (1.55 kg). Total Length: 12 inches (30.5cm) Barrel: 6 inches (15cm) metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 6 round cylinder. Velocity: Claimed 500fps.
Trigger Pull: The Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver shoots in either single action or double action. If you pull the hammer back, you can shoot in single action which will give you a super short trigger pull with virtually no takeup and a very light and predictable release, perfect for when you are wanting the best possible accuracy out of this Airsoft Revolver. You can also simply just pull the trigger in double action which means your trigger finger is doing all the work of pulling back the hammer and releasing it which is a much longer trigger pull that is between medium and heavy pull, but still fine for quicker action shooting.
Accuracy: So far I have not shot the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver but I have shot a lot of similar shell loading 6 shooter revolvers. Yes the cylinder and the actual shells are a bit larger but this should not really affect accuracy or power. Umarex does claim a max velocity of 500 fps which does seem high, so it will be interesting to see if the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver will actually hit these numbers. In my past Field Test Shooting Video Reviews I am generally able to get at least a 2 inch 6 shot groupings from 30 feet away from my paper target so hopefully that is the case with the S&W 629 Competitor.
Build Quality: If you’re looking for a very solid and hefty Airsoft revolver, than I don’t think there is anything more beefy than the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver. It is a whopping 3.3 pounds and is almost all metal so smaller handed shooters may find this one a bit too much to hold comfortably. Fit and finish is very good and I do really like the satin stainless steel look to it even though Umarex calls it a chrome finish.
Realism: I like the shell loading revolvers for the added realism you get manually loading the cylinder with 6 preloaded shells. In almost all of the shell loading 6 shooter revolvers, the cylinder and shells are actually smaller than what you would find in a real steel 6 shooter revolver, especially the Single Action Army Revolvers as they would normally shoot a .45 caliber shell rather than a .38 caliber shells. So it is nice that Umarex didn’t just go with already to go parts and they gave the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver newly designed larger shells and a larger cylinder, maybe the shells are not actually .44 caliber in size but the larger cylinder and larger shells does give it more realism. Of course almost all the parts function just like they would in a real steel revolver.
Pros:
Almost all Metal build with a very heavy weight of 3.3 pounds.
Full adjustable rear sight for windage and elevation.
Comes with 12 reloadable shells, most only come with 6 shells.
Grooved Pistol Grips for added comfort and grip.
Picatinny rail on top of barrel for adding a red dot or optional sight.
Nice Smith & Wesson markings on gun stamped into the frame.
Option of shooting in single or double action, nice light single action trigger.
I like the satin stainless finish.
Super realistic loading and shooting with the removable shells.
Cons:
Does come with an orange tip.
No adjustable hop-up I can see.
Rather large and heavy so not great for younger or smaller handed shooters.
Velocity may be a bit hot for some Airsoft games.
Comments:
I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road…
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:M9A1 TBC. Materials: Mostly all Metal. Weight: 2.1 pounds (926 grams). Total Length: 9.25 inches (23.5cm) Barrel: 4 inches (10.2cm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is single and double action. When the hammer is back and it is in singe action, the trigger is short and light with about a quarter inch take-up before the release which is crisp and fairly light. You can decock the hammer and shoot in double action which does make the trigger pull much longer and a bit heavier but it is still very usable. There is also a semi cock-option where the hammer is partially cocked. This keeps the hammer off the firing pin and allows for a safer double action trigger pull.
Accuracy: So far I have not shot the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol or made my Field Test Shooting Video. I have shot lots of KJWorks Full Blowback Airsoft Pistols in the past and they have in general performed as expected. So I am confident when I get to the Field Test Shooting Video for the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it should perform well for me!
Build Quality: The KJWorks line of Airsoft Guns are known for their excellent build quality, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is another example of a well made Airsoft Pistol with lots of metal parts including the slide, frame, inner and outer barrel, magazine, trigger, safety, slide catch release, take down lever and magazine release. The only real plastic I can see is the grips, butt plate, and CO2 gas nozzle. Fit and finish is really good. There is just a little bit of slide wiggle, but all the mechanical parts work well.
Realism: Most Full Blowback Airsoft Pistols are built to be as close to a real steel pistol as possible with similar dimensions, weight and feel. The blowback action gives a Blowback Airsoft Pistol the required slide action to allow for chambering of an Airsoft BB along with the reseting of the hammer, so true single action shooting is possible. Other than shooting a real steel Beretta M9A1, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is as close as you can get to it. Holding this pistol in your hand, it would be hard to tell it is not the real deal.
Pros:
Pretty much all metal pistols with good weight to it.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
Comes with threaded outer barrel for adding a compensator or mock suppressor.
Comes with barrel extension for higher velocity shooting.
Easy to add accessories to under barrel picatinny rail.
White dot sights front and back.
Ambidextrous safeties.
Two toned tan and black finish looks good.
Field strip-able.
Cons:
Sight are non-adjustable.
Grips may be a bit wide for some small handed people.
Extended magazine makes it a bit bulkier.
You need an Allan key to adjust the Hop-up.
Comments:
The Beretta M9 is a classic Semi Auto Pistol that has been used in military and police for decades and has proven itself over time. I would say it is right up there with the classic 1911 as being recognized as a dependable and solid semi auto pistol. I still kind of prefer the 1911 but I’d take a Beretta M9A1 any day of the week. You really can’t go too wrong with the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it has it all… Almost all metal build, full blowback operation with both single and double action shooting options. You have a picatinny rail for adding accessories and easy to see white dot sights front and back. This is probably one of my favorite Beretta M9’s in terms of looks and features.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-19. Materials: Mostly all Metal. Weight: 1.9 pounds (850 grams). Total Length: 10.6 inches (270mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 25 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-19 CO2 Blowback Airsoft Pistol is excellent, it is super short and light as you would expect from a 1911 trigger, the makeup is almost non-existent with a super light release. Out of the box I find it perfect but you have the option of adjusting it with the supplied Allen key since it has competition adjustably. Like I said, out of the box it felt perfect to me so there is no real need to mess around with it.
Accuracy: At this point I have not shot the KJWorks KP-19 CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have shot my fair share of KJWorks Full Blowback Airsoft Pistols and they have in general performed very well for me, so I am confident when I get to the Field Test Shooting Video for the KJWorks KP-19 CO2 Blowback Airsoft Pistol it will do a great job!
Build Quality: The KJWorks line of Airsoft Guns is known for their excellent build and overall quality and the KJWorks KP-19 CO2 Blowback Airsoft Pistol is no exception. You will find all metal for the most part including some CNC Aluminum parts like the barrel and compensator, the slide and frame are metal along with the magazine and most of the controls. The pistol grip and trigger guard is all in one and the main plastic you will find on the KJWorks KP-19 CO2 Blowback Airsoft Pistol. Weight, feel and balance is really good.
Realism: The KJWorks KP-19 CO2 Blowback Airsoft Pistol is a double stack modern tactical 1911 in design. All of the controls and the overall design are that of a 1911 and so if you are use to shooting 1911’s, then you will be accustomed to this Airsoft Pistol. The full length blowback simulates the shooting experience along with some recoil feel and also allows for that true single action only trigger we are use to with 1911’s with its short and super light trigger pull. The KJWorks KP-19 CO2 Blowback Airsoft Pistol is fully field strippable which allows for easy to get to hop-up adjustments. I did notice that the Back-strap safety is non-functioning and just there for show, I am not sure why they did not make it a working safety?
Pros:
Lots of metal parts with good weight to it at nearly 2 pounds.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full-size drop out magazine that holds 25 rounds.
Picatinny rail underneath for adding accessories.
Adaptor plate for adding a red dot to the rear of the slide.
I like the green dot fiber optic sights, super easy to see on all backgrounds.
I like the two tone CNC aluminum barrel finish you can also see through the slide cutouts.
Super short and light skeletonized adjustable trigger looks and feels great.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Grips are wide, may not fit the hands of small shooters.
Not all controls are ambidextrous.
Rear sight is not adjustable.
Back-strap safety is non-functioning.
Comments:
I’ve mentioned in many of my videos how I really like 1911 styled pistols and of course ones with full blowback operation, so the KJWorks KP-19 CO2 Blowback Airsoft Pistol for me is a winner even before I even try it. Of course how it performs is going to be the real deciding factor, even if I am rooting for it. What is not to like though? It is almost all metal, has full blowback operation, easy to see fiver optic sights front and back, the ability to add a laser or tac light up front with a red dot on the back by installing the adaptor plate so you can really dress this one up and make it your own at the end of the day.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-13 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 8.25 inches (210mm) Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is what you would expect from a true Single Action Only Trigger, which is nice and light and relatively short. There is some initial take up but you can feel the point near the back where the release kicks in which is extremely light and predictable with no play in it. Of course you will have to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the slide cycling for you.
Accuracy: At this point I have not shot the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have already made a full Field Test and Shooting Video of the non-TBC version which is virtually the same Airsoft Pistol but without the threaded outer barrel extension. You can watch that Filed Test Video here where I get around 350 average fps and close to a 2 inch grouping shooting at a paper target setup 30 feet down range. Stay posted for my Full Field Test Shooting Video for the TBC version down the road.
Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so I expect the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol to be just the same. From my testing with the non TBC version and my initial first impressions, everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.
Realism: The KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but you could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 TBC CO2 Blowback Airsoft Pistol so it should not set off any red flags over at Glock. It’s good that there are various color options, tan, grey and black. It does seem that only the Tan and Grey two tone versions are available in the TBC version while the black version we seem to have available in the all black non-TBC version.
Pros:
Metal and Polymer with decent weight and good feel to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the CO2 and 22 rounds.
Well hidden safety incorporated into the serial number under the barrel.
Working trigger safety.
Super easy to see in all conditions fiber optic sight up front.
All working components like the real steel Glock styled pistol.
Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.
Comes with barrel extension for higher velocity shooting.
Would make a good training weapon if you are use to using Glocks
Comes in Tan and Grey two tone options also.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Sights are not adjustable.
Would have liked the addition of white dots or outline on the rear sight.
Slide spring could be slightly heavier.
Comments:
Let’s be clear, the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not a Glock Replica. It is different in many ways, the idea here is that it is close enough to be a good alternative if you are use to shooting Glocks and want something to train with that looks, feels and functions a lot like a traditional Glock. I am hoping the TBC version performs as well as the non-TBC version shot for me when I made my original Field Test Shooting Video back in 2023. For me the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol checks all the boxes… Full blowback operation, a very good trigger, lots of realism and I am sure good performance based on my past review.
Type:Airsoft GBB Rifle. Manufacturer: Novritsch. Model: SSQ22. Materials: Metal and plastic. Weight: 4 pounds (1.8 kg). Total Length: 32.7 inches (83cm). Barrel Length: 14.6 inches (37cm). Barrel: Metal non-rifled. Propulsion: Green gas. Action: Semi auto single action only trigger. Hop-up: Adjustable top mount hop-up. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 36 round full size drop out plastic/metal magazine. FPS: 400+.
Trigger Pull: The Single Action Only trigger pull on the Novritsch SSQ22 GBB Airsoft Rifle is a lot like what you would find on a real steel Ruger 10/22. It is short and light in action making it light and quick enough for action shooting or sniping with accuracy from long range. You will have to work the bolt to load an Airsoft BB in to the breach and ready the single action trigger for the first shot, but then the blowback action will do that for you for the rest of the shots.
Accuracy: I have not shot the Novritsch SSQ22 GBB Airsoft Rifle or tested it out so far, so I don’t really have much to say in terms of accuracy or if it is close to the claimed 400+ fps, but I will be making a full dedicated Field Test Shooting Video for it a bit down the road when I get caught up with my Field Test Shooting Videos. So until then we will have to wait and see,
Build Quality: Novritsch is a new product line for me so I have not had much hands on with any of their guns so far. My first impressions are that they make very good quality Airsoft products using high quality materials with well thought out designs. The Novritsch SSQ22 GBB Airsoft Rifle is not super heavy even though it does incorporate a fair amount of metal components including CNC machined aluminum.
Realism: The Novritsch SSQ22 GBB Airsoft Rifle is not an exact copy or Replica of a Ruger 10/22 22LR Rifle but it does share a lot of its design and mechanical functions. Most people when they buy a base Ruger 10/22 generally do a lot of upgrading and modifications to them that ultimately make it look a lot more like the Novritsch SSQ22 GBB Airsoft Rifle at the end of the day. As it is Gas Blowback it functions very similar to the real steel version with working blowback action which does give a bit of recoil to it and allows for a very nice short and light single action trigger.
Pros:
Mostly all metal design.
Gas-efficient nozzle assembly, CNC machined Hop-Up chamber, and Maple Leaf 60° bucking with a large nub surface.
Easy to access and adjustable hop-up, up to 0.46g BBs out of the box.
Multiple M-LOK Mounting Options (Sides and bottom).
Three preinstalled QD Sling mounts on each side.
Front groove similar to gas pistol mags. You can see how many BBs are left in your magazine.
Skeletonized stock with a rubber pad that is attached to a Picatinny rail.
Nice GBB recoil with each shot.
Compact and light weight, easy to carry on the filed.
Ruger 10/22 owners will be use to this design.
Cons:
Does not come with any sights, will need to add one.
Only shoots in semi auto to conserve ammo.
Has preinstalled orange tip but can be removed.
Comments:
I am always a sucker for Gas Blowback Airguns in general and with Airsoft Rifles the vast majority tend to be AEG’s, so when I get the chance to review a GBB Airsoft rifle, I am always a bit excited to do so. The Novritsch SSQ22 GBB Airsoft Rifle has a lot going for it, there are lots of metal parts where you want them to be, a great single action trigger, mounting options for a red dot or optical sight along with M-LOK on the sides and bottom for whatever accessories you plan to add to it. It’s nice that it starts out pretty light as the addition of a scope, perhaps a foregrip, maybe a taclight and or laser will bring up the weight. I most certainly am looking forward to the Field Test Shooting Video so I can see how this one performs.
In this months Replica Airguns Mystery Unboxing Preview Video, I take a look at 4 new items that showed up at my door. Two Airsoft Rifles, one being AEG and the other one a GBB. I also received two accessories for the GEM Alias super tiny multi ammo CO2 Pistol, A .50 caliber Paintball Barrel for it and and a 12 gram CO2 Adapter.
Both Airsoft Rifles are new to me from a company called Novritsch which is a higher end brand so the pricing is not cheap for either Airsoft Rifle. It was nice to get an AEG and GBB to review, the Novritsch SSR77 AEG Airsoft Rifle is a Replica of the Steyr AUG while the Novritsch SSQ22 GBB Airsoft Rifle is essentially a custom modded Ruger 10/22 copy, at least from what I can tell, it is solid and really well built.
I have already made a Table Top Video for the GEM Alias CO2 Pistol but I have been waiting for the .50 Caliber Paintball Barrel to show up so I can test out all 4 barrel ammo options. I also really wanted the 12 gram CO2 Adapter so I don’t have to use the small 8 gram CO2’s which are harder to find and not as cost effective as the 12 gram CO2. So now I am totally ready to make the GEM Field Test Shooting Review.
I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.
Luckily I was able to find some time with James again this year and James gave us all the new details on some of the KWA updated and new products. Starting with the KWA ATP-Z Blowback Airsoft Training Pistol added recently to the KWA lineup, James also showed us a few versatile Carbine Pistol Kits made specifically for the ATP-Z and ATP-GT Pistols. Not yet fully released, James went over their updated TAC-9 hopefully coming out this year. We then got a nice tour of the updated Radian Model 1 AEG Airsoft Rifle with built in recoil system also built into KWA’s Q10 AEG Airsoft Rifle.
It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!
I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!
I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…
Type: Less Lethal Pistol. Manufacturer:Umarex - T4E. Model:P2P HDP 50 Compact. Materials: Metal & Polymer. Weight: 1.3 pounds (585 grams). Barrel: 4 inches (108mm) Smooth bore. Total Length: 7.2 inches (183mm). Power Source: 1x8 gram CO2. Action: Semi auto - Double action only trigger. Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball. Ammo Capacity: 4 Round spring fed internal magazine. FPS: 365 (11 Joules).
Trigger Pull: The trigger pull on Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so each round feels about the same with spring tension not playing much of a factor. In order to use the trigger, the Pistol will need to be fully charged by loading an 8 gram CO2 and giving it a smack on the bottom of the pistol grip of the CO2 screw. This will pierce the 8 gram CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the pressure indicator will retract and the trigger will not function and a new CO2 will be required for more shooting.
Accuracy: So far I have not tried out the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in the Replica Airguns Indoor Airgun Shooting Range, I have shot its big brother the Umarex P2P HDP 50 Gen 2 and it did shoot around a 6 inch 6 shot grouping for me with a velocity of around 450 fps that worked out to around a 15 joule energy rating. I do not expect the same from the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol as it is claimed with a lower velocity of 365 and an energy rating of 11 joules. It should get pretty close to this based on it’s bigger brother’s performance.
Build Quality: The build quality of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is very good overall. It is mostly made out of plastic which is fine, since it is designed to be a compact and portable pistol which should be on the lighter side. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. I wish the trigger guard that swings down to load the ammo clicked back into place better as it seems easy for it to open up and potentially get caught on clothing or objects while using it.
Realism: This version of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol comes with the orange slide area to show that it is not a lethal firearm. It may also come in an all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. Making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the legal system. That said the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol does look kinda like a modern or futuristic semi auto pistol and functions much the same but with a lot less force.
Pros:
Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe a decent amount power to hopefully deter an intruder.
It is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.
Decent power of claimed 365 fps with a 11 Joules energy rating.
Can store the 8 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.
Holds 4 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 8 shots per 8 gram CO2.
Black post front and orange notch rear sights have enough contrast to make sighting on most targets stand out.
Double action trigger feels smooth and not too heavy, also has a trigger safety on it.
Comes with 10 rubber and 10 powder balls along with three 8 gram CO2 to get you started.
Compact size is nice if you want to cary it with you, (law permitting).
Cons:
Uses 8 gram CO2 which are harder to get and more expensive than 12 gram CO2, will also get less shots per CO2 and quicker cool down.
No Picatinny rail or adjustable sights.
Only holds 4 rounds.
In Canada it does not seem you can get pepper balls easily most likely due to import regulations.
Comments:
I really liked the big full size brother of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol and it did turn out to not only be fairly accurate but also performed well in the power category, coming in even a bit higher than the claimed 13 joules of energy with a real world rating for me of 15 joules using standard .50 caliber rubber balls. So I am hoping the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol with its 365 fps rating and 11 claimed joules will at least hit the mark. Yes it is a bit less powerful but it is also a lot smaller and more compact if you where interest in conceal caring it. Again law permitting in your area! Stay posted for my Field Test Shooting Video where I will find out if the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol performs as expected.
Type: Less Lethal Pistol. Manufacturer:Umarex - T4E. Model:P2P HDP 50. Materials: Metal & Polymer. Weight: 1.5 pounds (.7 kg). Barrel: 4 inches (10.2 cm) Smooth bore. Total Length: 8.5 inches (21.6 cm). Power Source: 1x12 gram CO2. Action: Semi auto - Double action only trigger. Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball. Ammo Capacity: 6 Round spring fed internal magazine. FPS: 485 (13 Joules).
Trigger Pull: The trigger pull on Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so the each round feels about the same with spring tension not playing a factor. In order to use the trigger, the Pistol will need to be fully charged by loading a 12 gram CO2 and giving it a smack on the bottom of the pistol grip. This will pierce the CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the trigger will not function and a fresh CO2 will needed to be swapped over.
Accuracy: So far I have only briefly tried out the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol here in the Replica Airguns Indoor Airgun Shooting Range, and I was rather impressed at the initial performance as it did seem to be moving the .50 call rubber balls I was shooting at close to 500 fps with a lot of energy as my pepper and cardboard target was dislodged from the backstop after a few shots. Accuracy seems to be as expected from a Paintball type pistol, so I am expecting to get around a 4-6 inch 6 shot grouping at 30 feet away which will be effective in a Less Lethal encounter.
Build Quality: The build quality of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is good overall. It is mostly made out of plastic which is fine, as I feel that if it was mostly metal, and because of its larger size, it would be on the heavy side and not something you may want to use in a cary situation if that was your plan. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol does have more than enough weight at 1.5 pounds to feel solid in the hand.
Realism: This version of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol comes with the orange slide to show that it is not a lethal firearm. I have seen all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. So making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the law. That said the Umarex P2P HDR 50 Gen 2 CO2 Less Lethal Pistol does look like a modern semi auto pistol and functions much the same but with less force.
Pros:
Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe is enough power to actually dissuade most intruders.
In this case I like that it is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.
Nice powerful 485fps with a 13 Joules energy rating.
Can store the 12 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.
Holds 6 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 12 shots per 12 gram CO2.
Fiber Optic sights make it easy to line up your target in most lighting conditions and backgrounds.
Double action trigger feels smooth and not too heavy or long, also has a trigger safety on it.
Can add a tactical light or laser to the under barrel picatinny rail.
Comes with 10 rubber and 10 powder balls to get you started.
Cons:
It is a bit on the larger size, not going to be easy to cary if that is your plan. I do not know what the legal ramifications of carrying this would be as it is clearly designed for protection and not for lethal encounters.
Not a lot of shots per CO2 but the idea here is to quickly deliver as much damage as possible, this is not a weapon for prolonged gun fights.
In Canada it does not seem you can get pepper balls easily most likely due to import regulations.
Comments:
The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is a very refreshing product for us here in Canada as up until now similar styled Rubber Ball purpose built self defense products we have been able to get, in my opinion simply did not have enough power to really be effective other than the initial intimidation of holding what looks like a firearm. If it came down to actually shooting it, I don’t believe there would be enough stopping power to deter an intruder. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol on the other hand has a 485 fps, 13 Joules power rating which is a rather big jump from other similar products available to us here in Canada and although it may not stop everyone, I do believe you have a much better chance protecting yourself with the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. If you are looking for something to have at home to help you feel a bit safer, then the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is the absolute best option for Canadians at this time.
In this Indoor Field Test Shooting Video, I put the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol through my usual performance shooting test by first finding out what the velocity is by shooting 5 rounds through my Chronograph using a fresh CO2 along with .20 gram Airsoft BB’s. I follow this up with a 10 round accuracy test, again using .20 gram Airsoft BB’s and shooting at a paper target setup 30 feet down range, while seated on a stool in the back with my hands rested on a sand bag up front. This generally works pretty well and helps me get the most out the gun I am testing. If you are also interested in details and specifications than make sure to watch my Table Top Video I already made for the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol.
So how did the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol do in my testing? Not bad! Starting with the velocity fps test I shot 5 rounds through my chronograph with a brand new 12 gram CO2 cartridge and while EMG claims around 400 fps, I only averaged 321 fps with my fastest shot hitting 323 fps and my slowest shot hitting 318. So relatively close in terms of fps but not close to the 400 claimed fps. Totally fine for Airsoft games, perhaps in super hot temperatures, it can do better but in standard room temperatures this is what I got.
Next up I tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol’s accuracy from 30 feet away and put 10 rounds down range as best as I was able to do with my slightly aging eyes. I was happy with the results with most of the rounds staying within about 2 inches of each other and just slightly to the right of the bullseye, but pretty much perfect in terms of elevation. There where a couple of rounds that came outside of the base 2 inch grouping, which increased the grouping to about 3 inches total.
I am a huge 1911 fan and so a 2011 design only tuns up the dial that much more. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol performed without a glitch for me and I love the extra heft and snappy blowback action along with the crips light and short single action 1911 trigger. I was a bit surprised by the lower 323 fps velocity, but to be honest this is more than a capable velocity for a combat close range Airsoft Pistol. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a real looker for sure, it just needs that eye soar of an orange tip removed to perfect its look. If you like the look and feel of a 1911/2011 in your hand, and if stainless steel is your color of choice, then I would say go for this one.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…
Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.
Type: GBB Airsoft Pistol. Manufacturer: Distributed by EMG. Model:SAI 2011 DS 4.3. Materials: Mostly metal (Aluminum) and plastic. Weight: 1.94 pounds (878 grams). Total Length: 8.25 inches (210mm). Barrel: 4 inches (102mm) metal rifled. Propulsion: CO2 x1. Action: Semi auto Blowback, SAO trigger. Ammunition Type: 6mm Airsoft BB’s. Ammunition Capacity: 30+1. FPS: Claimed 380-430.
Trigger Pull: The trigger pull on the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol like what you would find on a traditional 1911 style pistol so it is Single Action Only and is nice and short and light in weight. Being a single action pistol for your first shot you will need to pull back the slide to chamber a round into the barrel which will also cock the hammer for you. the blowback action will cycle the slide for you from that point on automating the action.
Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol yet or even shot it at all so I can not comment on the performance other than the claimed velocity of (380-430 fps) which does seem a bit high to me? My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming out shortly…
Build Quality: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a well made Airsoft Pistol with quality materials throughout. You will find a machined aluminum slide an aluminum frame and a full metal drop out magazine. The barrel is Titanium Nitride Coated and the only real plastic parts I could find would be the grips, the gas tube and the hop-up wheel. The stainless coating on this Airsoft pistol looks fairly thick and so should stand up over time with less wear showing.
Realism: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol to me is not a true 2011 design as it does not have the once piece grip/trigger guard design found in 2011 pistols. It is double stack so that fits with the naming convention but I would say it is more like a combination of the Salient Arms SAI Red and SAI Red H. It does check all the boxes for realism in terms of function, looks and feel with all the working parts you expect on a Replica Airsoft Pistol including being able to fully field strip it.
Pros:
Superior Performance and 1:1 Scale Functionality.
Machined Aluminum Alloy Frame and Slide.
Rugged Reliability without sacrificing Weight.
Officially licensed by Salient Arms International.
Front and Rear Combat Style Sights with integrated Forward Fiber Optic.
Machined Anti-Glare Slide Top.
Ambidextrous Safety and Squared Trigger.
Titanium Nitride Style SAI Barrel for added durability.
On-Frame Integrated Accessory Rail.
Skeletonized trigger and hammer.
Options of both Green Gas and CO2 Magazines.
Deep Engraving with Real Steel Training Weapon Grade External Finish, Look, and Feel.
Cons:
Has orange barrel tip. But can be removed with some work.
No white dot or fiber optics on rear sight.
Not really a True 2011 in design as the name suggests.
Comments:
I am a huge 1911/2011 fan and so the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol really appeals to me. I like the compact design of the EMG SAI 2011 DS 4.3 yet it has a nice high capacity double stack magazine that gives this Airsoft Pistol a bit more girth in the hands which for me is OK as I have pretty large hands. I like that you have the option of shooting CO2 or Green Gas depending on what magazine you are using. This version comes with a CO2 Magazine, but you can purchase a green gas magazine if you prefer using gas over CO2. I like the modern look with the gold barrel and skeletonized trigger and hammer. The price is on the higher side but sometimes you have to pay a little bit more to get the additional quality and to have a gun that really stands out.
Here is Bonus Video Five in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this Fifth Bonus Full Auto Fun Video I bring out a past Full Auto Fun Airgun that I just couldn’t resist takin out for some full auto fun once again. The WE AK74UN Gas Blowback Full Auto Airsoft Rifle has got to be one of the hardest blowback Airguns I have shot, I would say even a bit more blowback feel than the KWA Mini UZI! The WE AK74UN Gas Blowback Full Auto Airsoft Rifle also does a great job of keeping Airsoft BB’s on target even in full auto with all that recoil as you will see in this video as I dial it in part way through my walk about. Unfortunately we do not sell anything like this anymore at least in Airsoft, the closest thing to it is the Crosman AK1 Blowback CO2 Full Auto BB Rifle which is still a lot of fun with a bit less recoil but a higher rate of fire.
Type: NBB CO2 BB Pistol. Manufacturer: Distributed by Gamo. Model: P-20. Materials: Plastic & metal. Weight: .97 pounds (439 grams). Total Length: 7.25 inches (184mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto NBB, double action only trigger. AmmunitionType: 4.5mm steel BB's. AmmunitionCapacity: 20 round metal stick magazine. FPS: Claimed 400.
Trigger Pull: The trigger pull on the Gamo GP-20 Combat CO2 BB Pistol is the same as pretty much all of the DOA trigger low cost BB Pistols where the trigger has to do all the work. Much of which is pulling back the fairly strong internal hammer spring which in this case is the barrel which protrudes slightly out of the front of the pistol until you reach the release point, and it snaps back hitting the valve and pressurizing the Airgun. This will give you a bit of a finger workout if you are shooting fast and want to empty out the 20 round magazine.
Accuracy: At this point I have not tested or shot the Gamo GP-20 Combat CO2 BB Pistol but I plan on making my Field Test Shooting Video the following week so stay posted for that. I do expect it to perform nearly exactly live every other Airgun made like this, and there are many that essentially have all the same internal components with a slightly redesigned outer shell, so mechanically they are all the same and should shoot about the same. It should get really close to the claimed 400 fps and I expect it to shoot under a 2-3 inch grouping, unless I am having an off day.
Build Quality: The build quality of the Gamo GP-20 Combat CO2 BB Pistol is what you expect from almost all plastic BB Guns of this type. It is not super heavy but that means less can break when dropped on a hard surface. Fit and finish are good and one gripe I have with most of these types of BB pistols built the same way, is that the grips are a bit lose so it can pop off when you pull it back. The Gamo GP-20 Combat’s grips are a lot more solid and this does help make the Airgun feel a bit more confidence inspiring.
Realism: The Gamo GP-20 Combat CO2 BB Pistol from what I can see is not an exact copy of a real steel pistol in production but it does look like a modern semi auto pistol in design. The barrel is slightly recessed, and the CO2 tab is also hidden inside the grips, so unless you get close to the pistol you would think it could be the real deal. That said some giveaways are the moulded into the slide ejection port and the screw holes on the right side of the two plastic halves of the Airgun along with the kind of out of place standard safety switch that looks more like something you would find on a piece of electronics.
Pros:
Very low cost and simple design will make it reliable.
Fit and finish looks decent for an all plastic gun, grip are actually pretty tight.
Picatinny rail for adding accessories like a laser or tac light.
Standard metal stick magazine found in lots of Airguns for cross compatibility.
Right hand screws are very small and less obvious then some other two sided low cost plastic Airguns.
White dot sight up front and fiber optic in the back are easy to see on all backgrounds..
Safety is right above the trigger finger so easy to switch if you are right handed.
Recessed barrel for added realism.
Cons:
Some more metal would have been nice, but typical of a low cost BB shooter like this.
Double action trigger does require some work, so action shooting will be a bit harder.
Not a lot of working parts other than the trigger, safety, and magazine release.
Comments:
I have reviewed many CO2 BB Pistols built exactly like the Gamo GP-20 Combat CO2 BB Pistol, so it is at least for me, not the most exciting Airgun review but I always enjoy the chance to shoot even the most basic of Airguns. I would say the Gamo GP-20 Combat CO2 BB Pistol in this category is one of the nicer options as I feel Gamo stepped up the build quality just a bit, even if it was just to make the grips feel more solid and less prone to popping off when loading CO2. It is a little bit beefier than similar CO2 BB Pistols in this category so maybe not the best for smaller handed individuals but good for someone like me with larger mitts. The price is right for sure and with its simple design, it should perform as expected for a good long time!
In this velocity and accuracy Field Test Shooting Video of the EMG SAI BLU Blowback CO2 Airsoft Pistol, I test out what the velocity is in feet per second (FPS) using a brand new 12 gram CO2 loading up .20 gram plastic 6mm Airsoft BB’s by shooting 5 rounds through my trusted Chronograph. Salient Arms claims 375 to 390 fps which is on the higher side for many blowback Airsoft Pistols. I then setup a fresh paper target 30 feet down range here in the Replcia Airguns Sea Can, and shoot 10 rounds at it using a semi rested shooting position to find out how the EMG SAI BLU Blowback CO2 Airsoft Pistol shoots in terms of if it is anywhere near the bullseye out of the box and if it can get a decently tight grouping. If you have not already watched my Table Top Video Review for the EMG SAI BLU, then make sure to watch it for details, specifications and some nice close up 4k video.
First up in my Field Test of my velocity test of the EMG SAI BLU Blowback CO2 Airsoft Pistol, I shot my standard 5 rounds through the Chronograph and then averaged them out. The slowest shot was 392 fps while the fastest shot hit 399 fps, this averaged 395 fps which was slightly higher than the claimed maximum of 390! Temperature was maybe a bit under 20 degrees Celsius, I would say closer to 18 or 19 which is in the low to mid 60’s or so degrees Fahrenheit, so it is possible for the EMG SAI BLU Blowback CO2 Airsoft Pistol to hit even higher fps velocity in warmer temperatures.
I then set things up for the accuracy portion of this test and placed a fresh paper target 30 feet downrange, using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back) I proceeded to place 10 rounds into the target with the EMG SAI BLU Airsoft Pistol. The EMG SAI BLU Blowback CO2 Airsoft Pistol did end up shooting fairly well centered on the target with some rounds even entering the bullseye for me. I found it shot just slightly to the right but not by much, in terms of elevation it averaged right in the center. The grouping for the 10 rounds was about 3 inches total but I feel the .20 gram BB’s where a bit of a light choice for this Airsoft Pistol as the velocity is higher than some and a heavier Airsoft BB’s would have probably gotten me better results.
I really enjoyed shooting the EMG SAI BLU Blowback CO2 Airsoft Pistol. Everything about it feels really good, the single action trigger is perfect, nice and short, light and crisp, the slide has such a snappy response to it with more blowback feel than I was expecting for a lighter slide. The overall feel and weight of the gun just feels good in the hand, not too heavy or light, the perfect weight to pack around as a dedicated sidearm for sure. It also has that Glock look and feel to it but with its own unique look so you won’t be just another dude with a Glock, not that that’s a bad thing but it does get a bit boring… The EMG SAI BLU Blowback CO2 Airsoft Pistol is a premium Airsoft Pistol so you will pay a bit more but you will get a really nice gun in terms of looks, originality and performance.
Type: GBB Airsoft Pistol. Manufacturer: Distributed by EMG. Model:SAI BLU. Materials: Metal and plastic. Weight: 1.3 pounds (570 grams). Total Length: 8.5 inches (216mm). Barrel: 4 inches (102mm) metal rifled. Propulsion: CO2 x1. Action: Semi auto Blowback, SAO trigger. Ammunition Type: 6mm Airsoft BB’s. Ammunition Capacity: 25. FPS: Claimed 375-390.
Trigger Pull: The trigger pull on the EMG SAI BLU Blowback CO2 Airsoft Pistol like a Glock is single action only and it is very light and short, perhaps lighter and shorter than a Glock trigger in my opinion. The EMG SAI BLU does have a working trigger safety similar to a Glock and for storage there is also a serial number switch located just in front of the trigger guard where you would expect it to be.
Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI BLU Blowback CO2 Airsoft Pistol so far so I can not comment on the performance other than the claimed velocity of (375-390 fps). My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming up shortly…
Build Quality: The EMG SAI BLU Blowback CO2 Airsoft Pistol is very well made with quality materials throughout. You will find a machined aluminum slide with lightening cuts, aggressive slide serrations with SAI rollmarks, an injected moulded polymer frame and a full metal drop out magazine. The SAI brass color removable back-strap and magazine release are also made out of metal and the backstop can be swapped out for other sizes but you will have to acquire those on your own.
Realism: The EMG SAI BLU Blowback CO2 Airsoft Pistol is custom designed and built by Salient Arms to fill the void between M&P ergonomics and Glock reliability. So it is not an exact replica but it does share its looks to a certain degree with a Glock, but I am sure Salient Arms did there best to not cross any lines in terms of infringement on other product designs. In terms of realistic operation the EMG SAI BLU functions and operates as you would expect a real steel pistol like it is designed around to operate.
Pros:
Nice light and short single action trigger.
Fit and finish is excellent, with qaulity build materials.
Fairly light weight pistol, easy side arm to pack around ready when you need it.
Fiber optic front sight for quick and easy shot placements.
Frame integrated 20mm accessory rail is ideal for mounting weapon lights and other accessories.
Threaded, fluted SAI style outer barrel (EMG SAI licensed proprietary convex thread cap included)
SAI brass color removable backstrap and magazine release for added weight to enhance balance while shooting.
Full size metal magazine holds the CO2 and 25 Airsoft BB’s which adds additional weight and balance.
Most mechanical parts work just like a steel version of this style of modern semi auto pistol.
Unique individualized serial number laser-engraved on every model.
Very snappy and responsive slide action.
Machined aluminum slide with lightening cuts, aggressive slide serrations with SAI rollmarks.
Cons:
Mine did not come with the EMG SAI licensed proprietary convex thread barrel cap .
Will need to purchase additional back straps separately if required.
Price is a bit on the higher side.
Comments:
The EMG SAI BLU Blowback CO2 Airsoft Pistol is a really well designed and built pistol and may be an option for someone looking for a Glock but that maybe want’s to have a more unique pistol with many of the features and benefits a Glock offers. I’m not sure I like the brass/gold highlights but I would say it is not over the top. I am especially impressed with how smooth the slide cycle feels, how snappy the return is and the spring feels the perfect amount. I am expecting when I load a 12 gram CO2 and actually fire the EMG SAI BLU Blowback CO2 Airsoft Pistol, the blowback operation will be really good! You will pay a bit of a premium for this Airsoft Pistol but it does have premium build and materials in it so it will be worth the slightly higher cost.
