Another revisit for an inexpensive and fun BB shooter, the Crosman Marlin Cowboy BB Rifle! I have done some previous video reviews and comparisons for the Crosman Marlin Cowboy BB Rifle so make sure to check them out. I also recently did an update Field Test Shooting Video for the Daisy Red Ryder BB gun which is a very comparable airgun to the Crosman Marlin Cowboy BB Rifle.
Here is a quick overview of the Crosman Marlin Cowboy BB Rifle, it's designed for younger smaller shooter with it's short stock but it's still fun of all ages! You can store 700 4.5mm Steel BB's in its internal magazine and Crosman claims a max velocity of 350 fps. Like the Daisy Red Ryder the power source is a spring piston that is activated by the lever action.
Now let's talk about how the Crosman Marlin Cowboy BB Rifle performed in my Sea Can Field Test Shooting test... Crosman claims a max fps of 350, my Chronograph results came in at a 5 shot average of 316 fps which is not bad compared to the Daisy Red Ryder that also has a claimed fps of 350 but only shot around 240 fps.
So the Crosman Marlin Cowboy BB Rifle is the clear winner in terms of velocity over the Daisy Red Ryder but what about accuracy? That's a different story, the Crosman did not perform all that great for me shooting at a paper target 30 feet away using a rested shooting position. I shot 10 rounds at my paper target and got about a 5-6 inch grouping, there was an underlying smaller tight group that was closer to about 3 inches but a god 3-4 of the BB's came out of it spreading out the group significantly. Compare that to the Daisy Red Ryder with a nice tight 2 inch group.
So what do you want? Power or accuracy? I figure since the Crosman Marlin Cowboy BB Rifle is really targeted of the younger more entry level shooter that it should have good accuracy so they know when they are doing it right and less concerned on if the gun is performing as it should. Sure power is fun and smashing your targets does give a certain satisfaction but you have to hit the target first :)
It's been a while since I pulled out the old Daisy Red Ryder BB Gun. And I know I have already done some Vimeo videos for the Red Ryder and the Crosman Marlin Cowboy but I really wanted to make an updated Field Test Video specifically for the Red Ryder and see how it fairs in a more controlled shooting test.
As always with my Field Test Shooting videos I test out the velocity using my Chrony Chronograph and see what the real world fps is compared to what Daisy Claims which by the way is up to 350 fps. I also setup a paper target about 30 feet back and take 10 shots using a rested and seated shooting position to determine what kind of grouping I can get and how well centered the airgun is out of the box.
During my velocity testing the Daisy Red Ryder BB Gun shot well under the claimed 350 fps by around 100 fps. I can say that the Daisy Red Ryder BB Gun was super consistent and shot between 242 fps as a low and 244 fps as a high averaging 243 fps. The Daisy Red Ryder is sure one of the most consistent airguns I have tested to date in terms of velocity constancy! This will help a lot with vertical accuracy.
During my accuracy test I would have to say the Daisy Red Ryder BB Gun shot pretty close to a 2 inch grouping and was pretty well centered with 4 shots hitting the black bullseye , I did pull my last shot a bit which extended the group a little but this was for sure my fault as I new I pulled it as soon as I shot it, the stock actually dropped on my shoulder a little just as I pulled the trigger.
Overall I really enjoy shooting the Daisy Red Ryder BB Gun, it's so simple yet so fun to shoot, there is just something about a lever action rifle that I really like and the super low cost to purchase and shoot a Daisy Red Ryder BB Gun also makes it a must have for anyone no matter how many airguns you own or what type you shoot.
I was originally planning on working out some of the magazine feeding issues with the Umarex Legends MP 40 Blowback CO2 BB Machine Gun as other reviewers had mentioned that the steel 4.5mm BB's can jam up a bit in the magazine. The only thing I did with my Umarex Legends MP 40 Blowback CO2 BB Machine Gun was to add a little bit of dry Jig-A-Loo lubricant to the magazine feeding track and make sure all my BB's where properly double stacked.. Other than that my Umarex Legends MP 40 Blowback CO2 BB Machine Gun is stock with no magazine spring mods.
I did find that my RWS Zinc coated Steel 4.5mm BB's had a tendency to bind a little in the top part of the magazine where the BB's go from a double stack to a single stack configuration. Now my RWS 4.5mm BB's are a bit older and I have found that older Zinc and Copper coated steel BB's will corrode a little which could cause some friction problems.
So for my Shooting Field Test I selected some brand new Umarex Zinc Coated Steel BB's and they did seem to work a little better for me as I did not get any magazine feeding issues during my testing of the Umarex Legends MP 40 Blowback CO2 BB Machine Gun. I did notice that when I did a magazine dump that the bolt cycle started to shorten up due to some cool down effect causing the bolt to lock, a quick 5 second break and she was good to go again to finish off the mag.
In terms of feet per second velocity Umarex claims around 450 fps for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun, this may be possible with brand new CO2 on a warm day but I got closer to a 400 fps 5 shot average under normal testing conditions, this is perfectly fine for a blowback BB airgun.
When I performed the accuracy test from my standard 30 foot out position on paper targets I got a very tight 1 inch group shooting in semi auto. just a light bit high and to the left but very close to the center bullseye. When I opened up and went full auto the group did largen a little since the Umarex Legends MP 40 Blowback CO2 BB Machine Gun does rock a little back and forth with it's internal bolt blowback operation but the remaining 40 rounds did stay within the most part within a 2-3 inch grouping.
The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a really sweet air riffle with a legendary look, blowback operation, semi and full auto capability, decent fps, great accuracy and at the end of the day is simply a ton of fun to shoot!
Type: Air Rifle / Machine Gun. Distributer: Umarex Model: Legends MP 40. Materials: Mostly Metal build. Weight: 7.7 pounds (3.5 kilograms) Barrel: 10 inches - smooth bore steel. Propulsion: 2x12 gram CO2. Action: Internal BoltBlowback single action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 52 round full size drop out magazine. Max FPS: 465.
Trigger Pull: The trigger pull on the Umarex Legends MP 40 Blowback CO2 BB Machine Gun is single action only and even though I have seen it tested at around 10 pounds pull, in person it does not feel that heavy and is actually fairly smooth. You will need ti charge the bolt for the first shot just like you would on the real steel MP 40.
Accuracy: I have not done my official Field Test Shooting Video for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun but did take it outside for a quick test run. Like others have reported back you really need to take your time loading the double stack magazine properly or you can have some feeding issues. it may even be a good idea to use a little lubricant in the magazine to help with BB smoothness. I will know more after I ahed played around with the Umarex Legends MP 40 Blowback CO2 BB Machine Gun a little more and worked out the BB feeding issues.
Build Quality: The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is pretty much all metal other than the stock and pistol grip. Pretty much everything that is black is going to be metal on this airgun. It weighs in at a hefty 7.7 pounds which is only a punt off form the real steel version. Overall the fit and finish is really good, all mechanical parts including the retractible stock work flawless.
Realism: The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a 1 to 1 replica of the real steel German made World War II Machine Gun. It is very authentic looking and has very similar operation. The BB version does have the ability to shoot in semi auto mode which the real steel version did not but this is a good feature for saving on CO2 and BB's It would have been nice if the bolt was abel to lock all the way back and up but since the movement is shortened this is not possible. Still the Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a really nice replica and almost every way.
Great to have another full size Rifle / Machine Gun available to purchase in a BB gun version.
Mostly all metal design with good overall weight.
Semi and Full auto select-ability.
Dual CO2 design for increased shots and less cool down effect.
High capacity full size drop out metal magazine.
Great looking replica of the real steel MP 40 in looks, operation and weight.
Internal bolt blowback will give a bit of recoil feedback feel.
Adjustable rear sight for shooting at different ranges.
Price point is reasonable for this type of full size mostly metal rifle.
Cons:
Sights are not adjustable for windage.
Bolt does not go all the way back to the lockout position.
Some reviewers have said that a full mag load does not always work well in full auto mode.
Comments: When I first got my hand on the Umarex Legends MP 40 Blowback CO2 BB Machine Gun at this years SHOT Show I immediately knew it was going to be a hit. The Umarex Legends MP has a lot going for it... High fps, semi and full auto, nostalgia of being a war replica and super great build quality and fit and finish. The questions is really who wouldn't want one? Especially being a replica BB rifle which has to be one of the more limited areas when it comes to airgun replicas. I look forward to shooting this offering from Umarex a little more and sharing my experiences with everyone.
My Vimeo Table Top Review of the Umarex Legends MP 40 Blowback CO2 BB Machine Gun:
What's not to love about the Umarex Legends MP 40 CO2 Blowback 4.5mm Steel BB Full Auto Machine Gun? It's pretty much all metal weighing in at close to 8 pounds, The Legends MP has a max fps of up to 465, shoots in both semi and full auto and has a high capacity all metal 52 round magazine that holds not only 1 CO2 but 2 CO2 for close to 200 rounds of semi auto shooting or about 140 shots in full auto. I really look forward to my Field Test Shooting Review of the Umarex Legends MP 40!
Not to be out shadowed or forgotten in the preview video, I also show off another 2017 SHOT Show CO2 Blowback Air Pistol, the Umarex Beretta APX! Right away the Umarex Beretta APX feels nice and solid in the hand weighing in at around 1.5 pounds with a heavy metal slide and really high quality plastic or polymer frame. You will find some nice details like a cut out ejection port and recessed barrel and of course full Beretta licensing from Umarex. The Umarex Beretta APX CO2 Blowback BB Pistol has a pretty decent claimed fps of close to 400 and a 20 round stick magazine that when inserted has that full size magazine look to it.
You'll also find other nice details like white dot sights front and back and a working slide catch release. My only gripe with the Beretta APX is the trigger, it does not ahed the trigger safety you would find on the real steel Beretta APX and the action is very long and perhaps a bit heavy. Other than that the Umarex Beretta APX looks to be a really nice replica airgun.
Type: Nerf Gun. Manufacturer: Nerf Hasbro Model:Rival Zeus MXV-1200. Materials: Mostly plastic build. Weight: About 3 pounds with batteries installed. Ages: 14+ (My son is 10 and he is more than OK with this gun!) Propulsion: Electric flywheel 6x C batteries. Action: Semi auto. Ammunition Type: Nerf High-impact round balls. Ammunition Capacity: 12 round tube magazine. Max FPS: 100.
Trigger Pull: The trigger on the Nerf Rival Zeus MXV-1200 is a little long and requires a firm trigger finger but it is not overly heavy. When you press the trigger it allows a Nerf High-impact round ball to advance into the motorized spinning flywheel area where the ball is accelerated and shot out of the inline barrel .
Accuracy: Keep in mind the Nerf Rival Zeus MXV-1200 is designed as a fun in home battle gun so long range accuracy is not really that important. At up to 30 feet or so you shoudl have no problem hitting a person sized target. The Nerf High-impact round balls do come out the the barrel with a fair amount of spin so some random hooking can happen, usually the spin is more of a backspin that helps keep the ammo targeting in a more linear trajectory.
Build Quality: The Nerf Rival Zeus MXV-1200 like most Nerf guns is built to take a fair bit of a beating since the target audience has mainly been kids and we know they are rarely careful with anything ;) The Nerf Rival Zeus MXV-1200 is mainly plastic but as I mentioned it is high quality and so far has held up well to usage. Fit is good with all interchangeable parts working well and the finish has stayed pretty much pristine!
Realism: Nerf guns are not made to be too realistic since they are meant to be toys and not look too closely like a real gun, hence the brightly colored plastic and more futuristic design. I do like the addition of Picatinny styled rails in several locations where one can add accessories like magazine clips, red dots or even a tactical light or laser sight.
Pros:
Not as extreme as a Paintball gun but a little more intense than a standard Nerf gun.
Good build quality overall.
Easy to quickly swap out a fresh 12 rode tube magazine.
Flip up sights
Picatinny raise for adding accessories.
Decent power and accuracy for a Nerf style gun.
Semit auto action for fast follow up shots.
Cons:
Will use up batteries pretty quickly.
Flywheel will slow down when shooting close together semi auto shots.
Loading magazines does take some getting use to.
Comments: The Nerf Rival Zeus MXV-1200 is a great option for pretty much anyone looking for a fun battle gun you can use indoors in your home with no worries about breaking windows or messing up your house. not to mention leaving west all over your body! The Nerf Rival Zeus MXV-1200 is going to be a bit more extreme than a standard Nerf gun for sure but way more toned down compares to a paintball gun or even an airsoft gun so if you want some good old rainy day indoor fun then checkout the Nerf Rival line of Nerf guns.
My Vimeo Table Top Full Review for the Nerf Rival Zeus MXV-1200:
Well the Shipping Container Office and Airgun Shooting Range is finally all ready to use and so for this first ever airguns shooting video in it, I simply wanted to try out a couple of airguns and see how this new setup worked. I also wanted to play around with some camera position setup to see how it all looked and if there will be any additional lighting or placement considerations.
Summer is here! While some folks are working on a tan, you're out working on your aim. This weekend, stock up on all the essentials — ammo, CO2, targets, extra mags — so you can shoot until the sun goes down.
When you spend $50 or more on any items, we'll ship them to you for free! Ends Monday, so don't wait.
I got a lot done this week in the Shipping Container Project Office and Airgun Shooting Range. Finished up all the drywall office mudding, I primed and painted the the office, connected up all the electrical and office lighting and installed the hardwood and baseboard along with the trimming. All that's left in the office is some caulking, paint touchup and then I have to figure out how I'm going to finish up the shooting hole? I do have some ideas for it though...
Next week I will be working on these odds and ends and hopefully may even get the shooting range spray foam insulted?
About three weeks ago I started the interior construction of the Shipping Container Project. So far I have cut out the window and door, framed the office in, installed the window and door, done some preliminary painting, wired in electricity for the entire unit, added an internet line, run underground wiring to the main house, installed insulation and vapor barrier and last but not least, added the drywall. I would have to say the worst is over and now I look forward to more of the finishing work like painting, flooring, connecting the electrical plugs and lighting fixtures.
The only real big jobs left to do would be painting the outside of the Sea Can and spray foam insulating the shooting range area but the spray foaming I will be contracting out and getting it done professionally so that part will be easy at least!
Yup, another Shipping Container Project Update Video! For those of you interested in this project I am sure you have been waiting with baited breath ;) And for those wanting more airgun videos you are probably wondering when I will resume making more... Heck, I'm with you on that one, this manual labour stuff is way harder than making airgun videos, but it is all for the greater good. I will try and slip in some airgun related videos before this Shipping Container Project is finished, that's almost a promise!!!
At this point I am almost ready for drywall, all the electrical is completed including running the power and Internetunderground to the poorhouse and main house. I need to have my Internets at full jam, that's a must!
This week I will be getting the electirfcal all hooked up to the main box, adding isulation and vapour barrier, some more window baar cleanup and painting and by end of the week I hope to have the drywall in place along with the taping and first layer of mud.
Oh yah, this video also includes a huge bonfire, every spring and fall we usually burn all the fallen branches and yard debris, everyone comes out and enjoys the huge fire :)
The Shipping Container Project is moving along nicely, this past week I finished up my office area framing, I also got the door and window cutout and installed! Next up on my list is cleaning up and painting the window bars so I can make the unit a bit more secure. I suppose I will have to do the same with the metal door since it is in dire need of a facelift. Once the doors and windows are all taken care of I will be moving on to the electrical and wiring. My goal is to get all of this done by end of week... The sooner I get this Shipping Container Project done the sooner I can get back to making even better and more consistent airgun videos in my new home.
This week I started framing in my new office and in this video I show the wall closest to the airgun range where the door and shooting opening are situated. I managed to frame the back wall in too. I also talk about how much time it takes even before you pick up a drill or hammer simply planning everything out and acquiring all the supplies required for a project like this. I have spent a ton of time researching what I need to make this Shipping Container Project into the vision I have for it. Spoiler alert, in my next video the framing is all done including the installation of my window and outside door, glad that part is over!
No need to hunt for deals this Easter, EVERYTHING in our store is on sale! So kickoff your long weekend with a long-barreled revolver. Celebrate spring’s arrival with a spring powered sniper rifle. Or treat yourself to a hollow chocolate bunny and some hollow point pellets. This deal ends soon, so hop to it!
Lately I have been doing a lot of sourcing out figuring out how everything is going to be laid out, what kind of lighting I want to use, how am I going to heat the office area in my shipping container. I want to keep everything pretty low power so my plan is to go with all LED lighting and a 400 Watt heater which should be
fine in my 90 square foot insulated office space. I plan to blast the shooting range with some propane heat on days when I need it for the shooting testing during the colder months.
I did pickup some hardwood flooring pretty cheap at Big Box Store and also got my 3x6 office window from Surrey New and Used. I already have metal doors that my father-in-law has had stashed away for several decades but at least now they are going to come in handy.
The first job or actual work I needed to do on the Shipping Container Project was to level and place the Sea Can onto some bricks/slabs, this also helps to keep the underside dry so it does not rust out. There shouldn't be much settling since the storage container is resting on my gravel parking area and the gravel goes right down about 1 foot deep to the hard pan.
Next on my list is starting the framing, figuring out exactly where the windows and doors will be and of course cutting the container to fit them.
This Vimeo video will be a little different than most, sorry no shooting and not even a single gun to show anywhere in this video! But it will lead to hopefully better shooting field test and table top videos down the road as I will have a dedicated space not only to work but to also shoot my review airguns.
Today, well actually yesterday a 40 foot shipping container (Sea Can) showed up at my house. This new metal box is going to be my airgun shooting range and office space combined. It will contain a 30 foot airgun shooting range closest to the rear doors so that I can open them and create a longer range if necessary. The front 10-12 feet of the container will be my work office space where. I will also use some of the container for storage.
Over the next few weeks I will be leveling the container, framing and insulating the office area, adding some electricity and lighting and of course completing some finishing work to the office space to make it more cozy. Eventually I hope to do some outside work giving the container some more curb appeal with a new coat of paint.
I plan to make more videos to share with everyone of the work progress as it happens so keep watching...
This year at SHOT Show 2017 in Las Vegas, I found there wasn’t a lot of new Airgun products but as always there are some that stood out for me. If you want more info on each Airgun Company then make sure to watch my full interviews for this years SHOT Show 2017. So without prolonging this video any longer let’s get right into it…
Umarex Legends MP CO2 Full Auto German MP40 Replica Machine-gun:
What’s not to like about the Umarex Legends MP? It has lots of metal parts weighing in at 7.7 pounds, a 60 round steel BB magazine with a dual 12 gram CO2 system. You also get your choice of shooting either in semi auto or full auto at up to 400 fps. Personally the Umarex Legends MP was the most interesting Airgun at the show this year for me and I really think it is going to be a hit!
Umarex SA10 Blowback Pellet and BB CO2 Pistol:
Another interesting product from Umarex this year was the SA10, I am not really sure what it is exactly styled after, it’s more of a futuristic looking gun with slide venting and a thread barrel for adding a mock suppressor or compensator. What appealed to me most about the Umarex SA10 was the new magazine design that incorporates a full size drop out metal magazine with 4 rotary 8 round magazines that can be loaded with either pellets or BB’s. When you empty one 8 shot magazine you simply drop the entire mag out and swap your empty 8 shot rotary magazine for a full one. The SA10 has a nice weight of around 2 pounds and shoots up to 426 fps.
Sig Sauer ASP P320 CO2 Blowback Pellet Pistol:
Sig Sauer introduced their new Sig Sauer ASP P320 CO2 Pellet Pistol this year that will be replacing the P250. Like the P250 the Sig P320 has a metal slide and polymer frame but instead of a double sided 16 shot rotary magazine, the Sig ASP P320 has a newly designed and very unique 30 round belt fed magazine. That’s nearly double the capacity without having to flip the magazine around part way through shooting. It’s great to see innovations like this happening in the airgun market.
Crosman Remington 1875 Shell Loading CO2 Pellet and BB Revolver:
Crosman introduced their own Single Action Old West Revolver this year in the form of the Remington 1875. Like the super popular Umarex Single Action Army Revolvers, the Remington 1875 is also shell loading and uses 12 gram CO2. You have the option of shooting either Pellets or BB’s out of its smooth bore barrel. I expect the Crosman Remington 1875 Shell Loading Revolver to be another popular Old West Airgun Revolver.
Crosman PSM45 Single Shot Spring Powered BB Pistol:
The Crosman PSM45 at first glance may not seem that interesting, after all it’s all plastic on the outside and only shoots about 200 fps! On the plus side it kind of looks like a Glock and we all know how hard it is to find airguns these days that resemble a Glock. I also like the fact that there is no need for any CO2, and most springers out there look like springers while the Crosman PSM45 looks like a real semi auto pistol. The PSM45 even has pretty decent weight to it since there are lots of internal metal parts and a full size drop out metal magazine which was a real surprise in such an entry level low cost pistol. If you’re looking for a fun inexpensive replica plinker than the Crosman PSM45 should fit the bill. On a side not the PSM45 would also make a really great low cost prop since the slide does work and it has that full size drop out magazine!
ASG Dan Wesson 715 2.5 and 4 inch Shell Loading CO2 Revolvers:
The ASG Dan Wesson Revolver has always been a popular choice, and then the Dan Wesson 715 came out improving on the design by adding extra weight and smoothing out the mechanics. How do you top that? Well by giving us some more options like barrel lengths. You now have your choice of a 2.5, 4 or 6 inch barrel for the Dan Wesson 715 and of course you will be able to buy your 715 pick in 4.5mm Steel BB, 6mm Plastic Airsoft or .177 Caliber Pellet ammunition versions. My personal choice may be the 4 inch Dan Wesson 715 since it has the addition of an integrated accessory rail machined into the outer barrel for lasers or tach lights.
Gletcher M1944 Mosin Nogant CO2 BB Rifle:
The Gletcher M1944 Mosin Nogant CO2 BB Rifle is not a new replica gun this year but it has been a hard one to get your hands on. In fact up until SHOT Show 2017 I had never seen one in person and so the Gletcher M1944 is new to me. I was very impressed with the quality of the Gletcher M1944 Mosin Nogant, it has a lot of metal parts including the swing out bayonet and even the simulated wood stock looks like real wood. I even had to take a second look and ask before confirming that the stock is in fact plastic on the Gletcher M1944 Mosin Nogant. I am looking forward to reviewing this rifle in the future when I do finally get one!
Of course there where other interesting products at SHOT Show 2017 this year but those are the products that stood out the most for me. Again make sure to watch my full interview videos to find out more about all the new products at this years SHOT Show.
Roses and chocolate are nice, but nothing says "I Love You" like a semi-automatic rifle. This year ditch the dinner reso and take your sweetheart on a romantic airsoft or hunting adventure. Couples who play together stay together, right?!
And finally my last Vimeo video from SHOT Show 2017 in Las Vegas! Sorry there is no Interview this time with KWA but I did talk a lot with the KWA folks over at SHOT Show this year and I even got to test out their Laser Targeting System designed to be used with several specifi KWA guns by laser-ammo.com.
Unfortunately we don't carry the KWA brand in the replica Airguns store, a few models sneak in when being distriubted by another company like ASG in the case of the ASG MP9. I would love to carry KWA Airsoft Products in the future since they really do make very high quality Airsoft guns.
KWA has a great selection of Airsoft pistols and rifles in both Gas Blowback and AEG formats. The quality reminds me of the KJWors Airsoft guns we sell in the Replica Airguns Canada Store, you can really feel the quality when you pick them up and hold them for yourself.
My last Interview for SHOT Show 2017 in Las Vegas, well at least till next year and I am already looking forward to going back and doing it all over again :) I met with Boris Shekhman from Gletcher and Boris showed me several of their Gletcher Airguns along with a new accessory introduced this year.
Probably the highlight at the Gletcher booth was the Gletcher M1944 Mosin Nagant CO2 4.5mm Steel BB Bolt Action full stock air rifle! I already reviewed the Gletcher M1891 short stock version but have been really looking forward to seeing the Gletcher M1944 Mosin Nagant in person. Interestingly, Boris was asked by the SHOT Show staff to remove the Gletcher M1944 Mosin Nagant from his display because the real metal swing out bayonet was a concern for them. Boris was kind enough to bring out the Gletcher M1944 for me to see and video for everyone. The full stock however is not real wood but you need to look super close to figure this out as the reproduction is incredible.
We took a look at another Gletcher Airgun I have reviewed in the past, the Gletcher NGT and Gletcher NGT R which are very acurate Steel BB and Pellet shooting reproductions of the Belgian Nagant Revolver. Both these BB and Pellet shooting NGT's are getting a slight make-over with the addition of a safety on them, the real steel versions do not have a safety but some dealers felt it was a concern so Gletcher moving forward will be including a safety on all new NGT's. So if you want a more original Gletcher NGT Nagant Revolver then hurry up and pickup the older non-safety versions while they are still available!
Last on the list of new products from Gletcher are some really great looking leather holsters that not only work for several Gletcher airgun products but can also be used for the same real steel versions. Some of the pistols these new leather holsters will accommodate are the Gletcher TT Tokarev, 1911, Grach, PM 1951 Makarov, and the Stechkin.
