Wow, we had a great contest giveaway for the Umarex Ace in the Hole Single Action Army Revolver. We received 406 participants with close to 2000 separate entries, so thank you everyone that got involved. Unfortunately for the other 405 participants there can only be one winner and to see who that winner is you're going to have to watch my Contest Giveaway announcement video...
I don't get many Gas Blowback Airsoft Rifles to review all that often so when I get my hands on them I sure have a great time testing them out and feeling the blowback action tapping me in the shoulder as I shoot in semi or full auto modes. Sure Gas Blowback Airsoft Guns don't perform like their AEG counterparts, especially when you're shooting in full auto. You can expect way less rounds in each magazine and even with less rounds the last 5 or 10 shots when shooting rapid fire are going to be compromised but I really don't care because a well made Gas Blowback Airsoft rifle like the KJWorks M4 CQB Carbine GBB is just so much more fun to shoot than an AEG and way more realistic.
So let's get on with my test results for the KJWorks M4 CQB Carbine GBB Airsoft Rifle... The fps consistency was really decent, super consistent when I spaced out my 5 test shots they averaged 377 fps, not really having any low or high fps shots out of the bunch. I did have a full gassed up mag and was using .20 gram plastic 6mm Airsoft BB's for this part of the field test.
Again shooting in semi auto mode, I placed 10 rounds into my paper target setup downrange 30 feet and as per usual I was using a rested shooting setup sitting on a stool and resting the KJWorks M4 CQB Carbine GBB Airsoft Rifle on a sandbag up front. 9 out of the 10 rounds all grouped in about a 3/4 inch group with only 1 round coming outside a bit stretching the 10 shot grouping out to about 1.5 inches. Still really great for a Gas Blowback or any Airsoft rifle for that matter!
Next I shot the rest of the mag in full auto burst mode which was about 20 rounds left in the KJWorks M4 CQB Carbine GBB Airsoft Rifle at this point. As expected the KJWorks M4 CQB Carbine GBB Airsoft Rifle cooled down pretty quick and the last 5 rounds did fire just fine but there was a noticeable drop in power making the rounds shoot low on the target. Keep in mind I was shooting in a not too warm environment, about 15 degrees which is not bad but also not that warm.
I would have liked to have seen the KJWorks M4 CQB Carbine GBB Airsoft Rifle perform as consistently in full auto mode as it did in semi auto but that would have been asking a bit too much from a Gas Blowback Airsoft rifle. The KJWorks M4 CQB Carbine GBB Airsoft Rifle is a really well put together Airsoft Rifle that didn't let me down in the end.
First off make sure to checkout my Table top review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol, it really is a nice Beretta Airsoft copy, perhaps one of the best out there!
In the Field Test Shooting Video I perform my standard Chronograph and accuracy tests on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol. I put 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's with a full propane filled magazine. My Sea Can indoor airgun range was warmed up sufficiently for a gas gun test but I found the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol did shoot a tad bit slower than the 330 or so claimed fps coming in closer to 300fps. Still totally usable for indoor airgun wars.
Moving onto my accuracy test I placed 10 shots on target 30 feet down range using a rested shooting position, sitting in the back and sand bag up front. This time I was impressed with how tight a group I got, I was able to get the bulk of the shots all within about three quarters of an inch with only two shots hitting just a little outside of this. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol was shooting a bit low for me but that can be easily corrected by adjusting the the internal hop-up to raise the shot placement up as required.
The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol has a somewhat relaxed blowback but has plenty to give some recoil feel. You will get at least a full 27 round magazines worth of shots from each gas fill, perhaps even two if you stretch out your shooting a bit.
Type: Gas Blowback Airsoft Pistol.
Manufacturer: G&G
Model: GPM92
Materials: Metal slide & frame.
Weight: 2.24 pounds (1016 grams).
Length: 8.9 inches total
Barrel: 4.6 inches, Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single and double action.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 27 rounds.
FPS: 350+ fps.
Trigger Pull: The trigger pull on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is very good in both single and double action. Double action is a bit longer but not that much heavier when shooting in single action. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol but I did get the chance to shot it quickly in my Sea Can indoor shooting range. Blowback felt good and accuracy seemed tight even though I was shooting free hand. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol shot just a little bit low but I can adjust the hop-up slightly to account for it.
Build Quality: Like pretty much all G&G Airsoft guns, the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol build quality is right inline. Fit and finish where excellent and a lot of attention to detail was seen all over this Replica Airsoft Pistol. There is also some new gas valve technology from G&G that should significantly help with freezing in colder or fast shooting situations.
Realism: The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is an excellent replica of the real steel Beretta Mod. 92FS, the safety even acts as a working decocker. You'll also find 5, 10, and 15 numbered markings on the backside of the magazine that would normally indicate how many bullets are in the magazine, a nice touch for sure! Everything works pretty much the same as it would on a real Beretta M9 including the ability to fully field strip the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol.
Available in the: Replica Airguns Store
Pros:
Lots of metal and good overall weight.
Pretty heavy Blowback operation.
Whirl Cylinder Valve system should expect to get decent amounts of shots per gas fill.
White dot sights front and back.
Comes with hard shell case.
Very detailed full size drop out metal magazine.
20mm rail for accessories.
Comes with high quality speed loader.
Safety also works as a decocker.
Threaded removable barrel tip for add on mock suppressor.
Cons:
Sights are non adjustable.
A little bit more expensive than some other Beretta M92 full blowback Airsoft pistols
Barrel opening not as recessed as much as a real 9mm would be.
Comments:
I would have to say the G&G GPM92 is one of the nicest Beretta Model 92FS Airsoft Pistols you are going to find out there. There is a ton of attention to detail for sure, You also get the hard shell case with included high quality speed loader and G&G's new Advanced Safety Release Valve and Revolutionary Whirl Cylinder Valve that help with freeze-up issues. You might pay just a smidgen more that some other similar Blowback Beretta M92's out there but I feel it is well worth it.
My Vimeo Table Top Review of the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol:
I just received some really nice G& G Airsoft guns to share with everyone, I have two CQB Styled AEG rifles and a fantastic Gas Blowback Beretta Mod. 92FS.
The AEG CQB AR or M4 styled rifles are similar in a lot of ways and are super compact and really well built. The G&G ARP-9 has a polymer receiver and hand guard while the G&G ARP-556 has a full metal receiver and hand guard. Both have good weight to them. You will also find Skeletonized PDW stocks and large crown flash hiders on both models along with M-LOK hand guards. Inside you will find upgraded ETU and MOSFET electronics.
Obvious difference are the 9mm style magazine found on the G&G ARP-9 versus the M4 styled high capacity magazine on the G&G ARP-556. You also get an ambidextrous safety sector switch on the G&G ARP-556.
Next I show off the G&G GPM92 Beretta Mod. 92FS Gas Blowback Airsoft Pistol. It comes in a high quality hard plastic case with a well made speed loader. If you place the magazine in the gun you will have room for two magazine in the hard shell case. The G&G GPM92 hold 27 roads in it's double stack magazine that has some interesting new features that help it perform much beet in cold environments and really boost green gas usage. G& G calls them the Whirl Cylinder Valve system and Micro gas filter. Both help eliminate free up in the gun when shooting fast.
The G&G GPM92 Beretta Mod. 92FS is really well made and shoot in double and single action and the safety even works as a decocker. For those looking to add a mock suppressor you will happy to know the G&G GPM92 has a threaded barrel tip.
This weekend save up to 10% on BB, pellet and airsoft rifles!
Also, loyal blog and channel followers get a coupon code for FREE SHIPPING on their purchase. Now that's something to be thankful for! Read this post for details!
Read More Categories: Replica Airguns News Tags:In this comparison video I look at a variety of different Sig Sauer P226 Airguns and compare them to each other to determine which one I feel is the best Sig Sauer styled Airgun. Of course my choice may not be your choice :)
Some of the airguns I consider in this comparison video are the: Umarex HPP BB Pistol, the Sig Sauer P226 Pellet Pistol, the Cybergun/KWC X-Five BB Pistols in Standard and Sight Rail versions, the Cybergun KJWorks KP01 P226 Airsoft Pistol, and the KJWorks KP02 P229 Airsoft Pistol.
So which Sig Sauer P226 did I like the best? Make sure to watch my YouTube Video and find out!
Well the Shipping Container Office and Airgun Shooting Range is finally all ready to use and so for this first ever airguns shooting video in it, I simply wanted to try out a couple of airguns and see how this new setup worked. I also wanted to play around with some camera position setup to see how it all looked and if there will be any additional lighting or placement considerations.
In this video I do a walk around to show off the new completed Shipping Container setup and then I shoot my 6.75 inch barreled Umarex Colt Single Action Army SAA Pellet Revolver followed by my ASG X9 Classic Beretta M9 CO2 Blowback 4.5mm BB Pistol.
Summer is here! While some folks are working on a tan, you're out working on your aim. This weekend, stock up on all the essentials — ammo, CO2, targets, extra mags — so you can shoot until the sun goes down.
When you spend $50 or more on any items, we'll ship them to you for free! Ends Monday, so don't wait.
I got a lot done this week in the Shipping Container Project Office and Airgun Shooting Range. Finished up all the drywall office mudding, I primed and painted the the office, connected up all the electrical and office lighting and installed the hardwood and baseboard along with the trimming. All that's left in the office is some caulking, paint touchup and then I have to figure out how I'm going to finish up the shooting hole? I do have some ideas for it though...
Next week I will be working on these odds and ends and hopefully may even get the shooting range spray foam insulted?
About three weeks ago I started the interior construction of the Shipping Container Project. So far I have cut out the window and door, framed the office in, installed the window and door, done some preliminary painting, wired in electricity for the entire unit, added an internet line, run underground wiring to the main house, installed insulation and vapor barrier and last but not least, added the drywall. I would have to say the worst is over and now I look forward to more of the finishing work like painting, flooring, connecting the electrical plugs and lighting fixtures.
The only real big jobs left to do would be painting the outside of the Sea Can and spray foam insulating the shooting range area but the spray foaming I will be contracting out and getting it done professionally so that part will be easy at least!
Yup, another Shipping Container Project Update Video! For those of you interested in this project I am sure you have been waiting with baited breath ;) And for those wanting more airgun videos you are probably wondering when I will resume making more... Heck, I'm with you on that one, this manual labour stuff is way harder than making airgun videos, but it is all for the greater good. I will try and slip in some airgun related videos before this Shipping Container Project is finished, that's almost a promise!!!
At this point I am almost ready for drywall, all the electrical is completed including running the power and Internetunderground to the poorhouse and main house. I need to have my Internets at full jam, that's a must!
This week I will be getting the electirfcal all hooked up to the main box, adding isulation and vapour barrier, some more window baar cleanup and painting and by end of the week I hope to have the drywall in place along with the taping and first layer of mud.
Oh yah, this video also includes a huge bonfire, every spring and fall we usually burn all the fallen branches and yard debris, everyone comes out and enjoys the huge fire :)
The Shipping Container Project is moving along nicely, this past week I finished up my office area framing, I also got the door and window cutout and installed! Next up on my list is cleaning up and painting the window bars so I can make the unit a bit more secure. I suppose I will have to do the same with the metal door since it is in dire need of a facelift. Once the doors and windows are all taken care of I will be moving on to the electrical and wiring. My goal is to get all of this done by end of week... The sooner I get this Shipping Container Project done the sooner I can get back to making even better and more consistent airgun videos in my new home.
This week I started framing in my new office and in this video I show the wall closest to the airgun range where the door and shooting opening are situated. I managed to frame the back wall in too. I also talk about how much time it takes even before you pick up a drill or hammer simply planning everything out and acquiring all the supplies required for a project like this. I have spent a ton of time researching what I need to make this Shipping Container Project into the vision I have for it. Spoiler alert, in my next video the framing is all done including the installation of my window and outside door, glad that part is over!
No need to hunt for deals this Easter, EVERYTHING in our store is on sale! So kickoff your long weekend with a long-barreled revolver. Celebrate spring’s arrival with a spring powered sniper rifle. Or treat yourself to a hollow chocolate bunny and some hollow point pellets. This deal ends soon, so hop to it!
Lately I have been doing a lot of sourcing out figuring out how everything is going to be laid out, what kind of lighting I want to use, how am I going to heat the office area in my shipping container. I want to keep everything pretty low power so my plan is to go with all LED lighting and a 400 Watt heater which should be
fine in my 90 square foot insulated office space. I plan to blast the shooting range with some propane heat on days when I need it for the shooting testing during the colder months.
I did pickup some hardwood flooring pretty cheap at Big Box Store and also got my 3x6 office window from Surrey New and Used. I already have metal doors that my father-in-law has had stashed away for several decades but at least now they are going to come in handy.
The first job or actual work I needed to do on the Shipping Container Project was to level and place the Sea Can onto some bricks/slabs, this also helps to keep the underside dry so it does not rust out. There shouldn't be much settling since the storage container is resting on my gravel parking area and the gravel goes right down about 1 foot deep to the hard pan.
Next on my list is starting the framing, figuring out exactly where the windows and doors will be and of course cutting the container to fit them.
This Vimeo video will be a little different than most, sorry no shooting and not even a single gun to show anywhere in this video! But it will lead to hopefully better shooting field test and table top videos down the road as I will have a dedicated space not only to work but to also shoot my review airguns.
Today, well actually yesterday a 40 foot shipping container (Sea Can) showed up at my house. This new metal box is going to be my airgun shooting range and office space combined. It will contain a 30 foot airgun shooting range closest to the rear doors so that I can open them and create a longer range if necessary. The front 10-12 feet of the container will be my work office space where. I will also use some of the container for storage.
Over the next few weeks I will be leveling the container, framing and insulating the office area, adding some electricity and lighting and of course completing some finishing work to the office space to make it more cozy. Eventually I hope to do some outside work giving the container some more curb appeal with a new coat of paint.
I plan to make more videos to share with everyone of the work progress as it happens so keep watching...
This year at SHOT Show 2017 in Las Vegas, I found there wasn’t a lot of new Airgun products but as always there are some that stood out for me. If you want more info on each Airgun Company then make sure to watch my full interviews for this years SHOT Show 2017. So without prolonging this video any longer let’s get right into it…
Umarex Legends MP CO2 Full Auto German MP40 Replica Machine-gun:
What’s not to like about the Umarex Legends MP? It has lots of metal parts weighing in at 7.7 pounds, a 60 round steel BB magazine with a dual 12 gram CO2 system. You also get your choice of shooting either in semi auto or full auto at up to 400 fps. Personally the Umarex Legends MP was the most interesting Airgun at the show this year for me and I really think it is going to be a hit!
Umarex SA10 Blowback Pellet and BB CO2 Pistol:
Another interesting product from Umarex this year was the SA10, I am not really sure what it is exactly styled after, it’s more of a futuristic looking gun with slide venting and a thread barrel for adding a mock suppressor or compensator. What appealed to me most about the Umarex SA10 was the new magazine design that incorporates a full size drop out metal magazine with 4 rotary 8 round magazines that can be loaded with either pellets or BB’s. When you empty one 8 shot magazine you simply drop the entire mag out and swap your empty 8 shot rotary magazine for a full one. The SA10 has a nice weight of around 2 pounds and shoots up to 426 fps.
Sig Sauer ASP P320 CO2 Blowback Pellet Pistol:
Sig Sauer introduced their new Sig Sauer ASP P320 CO2 Pellet Pistol this year that will be replacing the P250. Like the P250 the Sig P320 has a metal slide and polymer frame but instead of a double sided 16 shot rotary magazine, the Sig ASP P320 has a newly designed and very unique 30 round belt fed magazine. That’s nearly double the capacity without having to flip the magazine around part way through shooting. It’s great to see innovations like this happening in the airgun market.
Crosman Remington 1875 Shell Loading CO2 Pellet and BB Revolver:
Crosman introduced their own Single Action Old West Revolver this year in the form of the Remington 1875. Like the super popular Umarex Single Action Army Revolvers, the Remington 1875 is also shell loading and uses 12 gram CO2. You have the option of shooting either Pellets or BB’s out of its smooth bore barrel. I expect the Crosman Remington 1875 Shell Loading Revolver to be another popular Old West Airgun Revolver.
Crosman PSM45 Single Shot Spring Powered BB Pistol:
The Crosman PSM45 at first glance may not seem that interesting, after all it’s all plastic on the outside and only shoots about 200 fps! On the plus side it kind of looks like a Glock and we all know how hard it is to find airguns these days that resemble a Glock. I also like the fact that there is no need for any CO2, and most springers out there look like springers while the Crosman PSM45 looks like a real semi auto pistol. The PSM45 even has pretty decent weight to it since there are lots of internal metal parts and a full size drop out metal magazine which was a real surprise in such an entry level low cost pistol. If you’re looking for a fun inexpensive replica plinker than the Crosman PSM45 should fit the bill. On a side not the PSM45 would also make a really great low cost prop since the slide does work and it has that full size drop out magazine!
ASG Dan Wesson 715 2.5 and 4 inch Shell Loading CO2 Revolvers:
The ASG Dan Wesson Revolver has always been a popular choice, and then the Dan Wesson 715 came out improving on the design by adding extra weight and smoothing out the mechanics. How do you top that? Well by giving us some more options like barrel lengths. You now have your choice of a 2.5, 4 or 6 inch barrel for the Dan Wesson 715 and of course you will be able to buy your 715 pick in 4.5mm Steel BB, 6mm Plastic Airsoft or .177 Caliber Pellet ammunition versions. My personal choice may be the 4 inch Dan Wesson 715 since it has the addition of an integrated accessory rail machined into the outer barrel for lasers or tach lights.
Gletcher M1944 Mosin Nogant CO2 BB Rifle:
The Gletcher M1944 Mosin Nogant CO2 BB Rifle is not a new replica gun this year but it has been a hard one to get your hands on. In fact up until SHOT Show 2017 I had never seen one in person and so the Gletcher M1944 is new to me. I was very impressed with the quality of the Gletcher M1944 Mosin Nogant, it has a lot of metal parts including the swing out bayonet and even the simulated wood stock looks like real wood. I even had to take a second look and ask before confirming that the stock is in fact plastic on the Gletcher M1944 Mosin Nogant. I am looking forward to reviewing this rifle in the future when I do finally get one!
Of course there where other interesting products at SHOT Show 2017 this year but those are the products that stood out the most for me. Again make sure to watch my full interview videos to find out more about all the new products at this years SHOT Show.
