I want to say first off that I don't take any pleasure in killing animals, even the ones that invade my home and eat my crops, but unfortunately there are times when you have to do what you have to do and restore order.

I live on six acres of land and only really have a problem with two pests, and that would be Rats and Flying Rats, (otherwise known as Crows). The Rats get into my garbage and even into the house at times and chew and eat things that don't belong to them making a big mess. The Crows on the other hand eat the cherries and plums on my fruit trees and seem to take pleasure in killing the Blue Jays and Robbins that are trying to make a home on my farm.

I have purchased a dedicated .22 caliber Crosman Quest 800 pellet gun that is capable of 800 fps for the humane elimination of the Rats and Crows that are not welcome on my land. I use this Pellet Rifle most of the time to quickly and humanely dispose of the pests and vermin.

I recently purchased the Webley Alecto (Zoraki HP-01) in .22 Caliber and thought it would make a great compact pest control gun as it has good power and accuracy and is available in .22 caliber which puts more raw energy into the target. It is the time of year again when the young Crows that have not yet learned to stay away from my property start coming around and causing a nuisance, so I thought this would be as good a time as any to try out my Webley Alecto.

The target was a medium sized crow about 40 feet away. My Webley Alecto was sighted in and ready to go with 18 grain Beeman Crow Magnum hollow point pellets. I pumped it up to the max and took aim, the crow immediately went down and landed in my pool area. Unfortunately I winged him, I really mean it because his wing was obviously broken. I waited for him to settle down (there was nowhere for him to go in the fenced off area) and put one last round into him, again from at least 40 feet away. The second shot was a head shot and it was game over.

I was shooting a bit far out for open sights in this case but even so I put both shots into the Crow. Adding a low power Scope or even a Red Dot would make extended range shooting with the Webley Alecto a bit more precise. The Webley Alecto is definitely up for the job of taking care of the Pests and Vermin around your home or farm. My father is even going to pick up a Webley Alecto for his hunting trips to use as a grouse gun when he is out hunting larger game. The Webley Alecto is fully legal to carry in Canada (non-controlled firearm) and very compact.

Well hopefully I have not offended anyone? Just remember, this is a gun website and guns get used for many things, one of which is taking care of business - just as they where designed to do!

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• MARLIN COWBOY LEVER ACTION BB GUN

• CROSMAN MARLIN COWBOY LEVER ACTION BB RIFLE REVIEW

I don't know if a lot of people out there are going to be interested in the feet per second performance of what some might call a kids BB gun, but I know I was. And since I already had my Chrony chronograph setup I thought it would be just as easy to put my Crosman Marlin Cowboy Lever Action BB shooter through the paces.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The Cowboy has a claimed feet per second rating of  "up to" 350 fps so I wasn't expecting too much. Right off the bat it hit around 300 fps and kept climbing till it hit just under 320 feet per second. I even went back later after shooting it for a bit and hit got to the mid 320's! I think it just needed a bit of breaking in to hit it's full potential.

Anyway, The Crosman Marline Cowboy Lever action rifle is a really fun BB gun to shoot and my son is going to love it when he gets it for his birthday one of these years, when he's ready...

Watch my Vimeo video of the Crosman Marlin Cowboy full Chronograph test:

Buy Air Rifles in Canada   -   Buy Marlin Cowboy in the US

Buy Air Rifles in Canada   -   Buy Red Ryder in the US

Related Posts:

• EKOL ES 55 CO2 4.5MM BB PISTOL REVIEW

Another airgun I have been really curious about the actual fps, is the EKOL ES 55. It's one of my only BB pistols that can shoot clean though a soup can. Some of the other BB shooter almost make it but just not quite, even with ratings as high as 480 fps!

The EKOL ES 55 is an overall really nice BB gun with a heavy duty all metal build and it even sports a rifled barrel, another feature not often found in BB shooters.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Now that I have my Chrony chronograph, I am able to actually test these guns and find out their true feet per second ratings and from what I'm seeing, most of the guns come in under their rated fps. My EKOL ES 55 actually did pretty well, the manual claims 120 M/S which translates to 396 fps but interestingly, they actually claimed 360 fps?

So I really needed to get to the bottom of it! I took 15 shots (a full magazine) with the EKOL ES 55 with a few seconds gap between each shot and the gun stayed pretty consistently right around the 420 fps mark. Not bad at all and actually above the claimed feet per second rating!

So if your looking for a good quality BB pistol with 400+ fps, look no further then the EKOL ES 55!

Watch my Vimeo video putting my EKOL ES 55 through the full Chronograph test:

Buy this gun in Canada

Related Posts:

• WEBLEY ALECTO .177 AND .22 CALIBER MULTI-STROKE PNEUMATIC TARGET PISTOL

• WEBLEY ALECTO - ZORAKI HP-01 .177 & .22 CALIBER PCP AIR PISTOL REVIEW

I have been wanting to do a Chrony test for my Webley Alecto as I didn't have a chronograph at the time of my original review. Today was the day I got around to it and I am really happy with the results I got. Mine came with the pressure release valve adjusted fairly conservatively. I imagine this is a generic setting that is set the same for both the .177 caliber and .22 caliber versions based on the lighter .177 caliber having a faster muzzle velocity and hittiing the 495 fps with less pressure required.

In the case of a .22 caliber pellet and it having approximately double the weight, the pressure release valve may be adjusted a bit on the light side, but I was only guessing and I wanted to make sure I didn't have an air pistol shooting over 500fps as this would make it a restricted firearm here in Canada and although I have my restricted firearms license, I didn't want to have this particular pistol governed by the rules and regulations of a restricted firearm.

So lets get to my results. I was using crosman premium 14.3 grain pellets for this test, far from the heaviest .22 caliber pellets you can get. I also tested my Webley Alecto out with one, two , three and even four pumps. Keep in mind pumping the Webley Alecto four times is not recommended by the factory and could cause long term damage to your Alecto. I did it with mine because I will ultimately get asked what an extra pump will give you in terms of extra fps. 

• One Pump: 270.9 fps

• Two Pumps: 390.5 fps

• Three Pumps: 449.8 fps

• Four Pumps: 487 fps & 496.3 fps

So as you can see, I did not go over 500 fps even with four pumps which is exactly where I wanted this pistol to be around. If you do decide to do the pressure release valve mod on your Webley Alecto, I would recommend you also test yours out on a chronograph just in case your results are different then mine, and keep in mind modifying the Webley Alecto could void your warrantee. The last thing you want to be carrying around is an illegal firearm!

Buy Webley Guns in Canada

Buy Webley Guns in the US

Related Posts:

• EKOL - ASI - FIRAT - SPECIAL 99 - ES 55 - MAJOR - TUNA - ARDA ARRIVE

• EKOL ES 55 CO2 4.5MM BB PISTOL REVIEW

• EKOL SPECIAL 99 9MM P.A.K. BLANK GUN REVIEW

• EKOL ASI UZI 9MM P.A.K. BLANK MACHINE GUN REVIEW

• EKOL TUNA 8MM P.A.K. BLANK GUN REVIEW

• EKOL ARDA 8MM P.A.K. BLANK POCKET REVOLVER REVIEW

• EKOL MAJOR 9MM P.A.K. 007 PPK BLANK GUN REVIEW

I have been wanting to shoot my latest batch of EKOL Blank Guns, and today I was able to do just that! I left out my EKOL Firat because I have already done a shooting review of the EKOL Jackal and these guns are virtually identical with the exception of the Jack Dual being a semi and full auto blank shooter. Here are the guns I got to shoot today: (EKOL Arda, Tuna, Major, Special 99 and ASI UZI), all of which where purchased from the Replica Airguns Store.

In this video I use both my Canon T2i DSLR and my Casio EX-FC100 high speed camera so I was able to capture it all in both High Definition and in High Speed slow motion. First off I was very impressed with how all of these EKOL blank guns performed, this was my first time shooting them and they all shot every round without a misfire, jam or loading problem.

Buy Blank Guns in Canada

Buy Blank Guns in the US

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

"Before you attempt to do this modification you need to be aware that it may void your warrantee and/or you may fail and either break something or incorrectly reassemble your Mini UZI rendering it "Broked"! This is your problem so please do not attempt this modification (even though it is fairly easy to do) unless you're 100% confident you can do it and are aware of the possible consequences. Make sure to also take into account any gun laws in your area prohibiting full-auto capable firearms!"

(Special thanks to Herman for showing me the ropes on this modification)

This modification will make your semi-auto "only" Cybergun/KWC Mini UZI BB Gun into a full auto capable 4.5mm BB machine gun. From the factory the full auto switch position (Far Left "A") is disabled but the full auto selector position is visible. The actual full-auto functionality is still present in the Mini UZI but has been decommissioned by the simple means of blocking the selector switch from being moved to the far left full-auto or "A" position.

This full auto modification will show you how to disassemble the Cybergun - KWC Mini UZI BB Gun and remove the small plastic selector switch blockage so you will be able to manually switch between semi auto and full auto modes. This modification takes about 15 minutes to complete.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

You will need the following tools: A pair of pliers and either a pair of small wire cutters or a file.

Let's begin! Below are the two pre-modification positions available from the factory:

"S - SAFE"

"R - SEMI AUTO"

Below is a closeup of the top bolt cover that we will be removing to access the internal bolt for removal:

In the next photo we have removed the bolt cover by pressing the "angled button" towards the rear sight:

And now the bolt is removed:

I removed the grips but this is not necessary:

Now you will need to remove the lower receiver pin located at the back end of the receiver closest to the grip safety. Use a pair of pliers to pinch the metal pin while pushing it through. Once the pin is started you can use the pliers on the other side to pull the pin all the way out. You may need to us a fair amount of force to do this as the fit of the pin is tight:

Once the pin is removed the lower receiver can be detached:

You can see in the picture below the small plastic nub that we will need to remove in order to restore full-auto capability:

I used a pair of small wire cutters to clip this plastic nub off, but you could use a file too. Just make sure that the plastic is flush and does not have any burs or protrusions.

Below is a photo of the Plastic Nub removed from another angle:

After that, all you need to do is reassemble you Mini UZI in revers order to finnish the Full Auto modification.

In the below Photos you can see we have restored the ability to move the fire selector switch over to the "Far Left" or "A" position, reenabling the Cybergun - KWC Mini UZI BB Gun to shoot in full auto when desired.

"A - FULL AUTO"

Now enjoy your Cybergun - KWC Mini UZI BB Gun in full-auto as it was originally designed!

Here is my Vimeo Video in Narrative with Photos:

Buy this gun in Canada

Buy this gun in the US

This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US

(Photo curtesy of www.co2airguns.net)

Related Posts:

• CYBERGUN GSG 92 BB GUN FULL AUTO MODIFICATION

• CYBERGUN GSG 92 ON ITS WAY!

• CYBERGUN GSG 92 BB GUN REVIEW

In this Vimeo video I do a Field Test of the Cybergun GSG 92 CO2 BB Gun. I take three sets of five shots on a target at that is twenty five feet away. Each set of five shots are taken from different camera views. The first camera view is in a standard zoomed out view, then I zoom in on the gun with some slow motion shots mixed in, after that I shoot the last 5 shots with the camera on the target. Lastly I shoot a fifteen round burst in full auto mode with an on-target camera view.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The Cybergun GSG 92 shot close to a 2.5 inch group at twenty five feet in the standing position and without any kind of rest. Not too bad for a blowback BB gun!

My Vimeo Video Review for this Airgun:

Buy this gun in Canada

Buy this gun in the US

(Photo curtesy of www.co2airguns.net)

Related Posts:

• UMAREX H.P.P AND SA177 COMPARISON/REVIEW

Type: BB air pistol.

Manufacturer: Umarex.

Model: HPP.

Materials: Mostly all metal construction.

Weight: 1.8 pounds.

Barrel: 3.6 inches, steel, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto blowback, double action.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 15 rounds

FPS: 410

Trigger Pull: This gun has a medium trigger pull, the first 3/4 of the trigger pull actuates the hammer with a noticeable click when the hammer is all the way back and ready to fire. The last part of the trigger pull is much lighter. With practice you will be able to engage the hammer and then fire the gun in a kind of simulated single action mode.

Accuracy: Medium to good.

Build Quality: In its price range this air gun offers good build quality and value, it feels solid and well built and has a very hefty feel for a compact size gun. I would have liked to have seen the magazine made from metal rather than plastic.

Realism: This gun is loosely styled after a Sig Sauer 226-228. It is lacking a cut-out ejection port that would have added greatly to its realism. The grips are also molded into the handle giveing the gun durability but not authenticity. I would have also liked to see a heftier magazine as it's made out of plastic and feels a bit cheap compared to the rest of the gun. I do like the fact that the barrel tip has a large diameter opening making the gun look more like the larger caliber weapon it is styled after. 

Purchased this gun from: The Replica Airguns Store

Pros:

• Well priced for what you get.

• Mostly all metal construction (Except for the magazine).

• The gun feels really good in the hand and shoots well with a very responsive kick.

• Good powerful and accuracy for a blowback BB gun.

• Much better trigger pull/feel than the SA177.

• Has good power to CO2 usage ratio, can get around 100 shots per CO2 cartridge.

• Picatinny rail for accessories like Laser sights and tactical lights.

Cons:

• Again with the plastic magazine but it is a con after all!

• Ejection Port should have been cut out to make the gun look more realistic.

• I would have like to have seen actual rubber grips rather than the moulded in metal ones.

Comments:

I found this Umarex Blowback BB gun to be a really accurate, responsive and enjoyable gun to shoot. It is very compact yet has nice heft and the blowback action is snappy giving you the feeling of a real automatic weapon. The fact that this gun is so inexpensive and yet delivers great power and CO2 efficiency makes it not only affordable to buy but also shoot on a daily basis.

Buy Umarex HPP in Canada

Buy Umarex HPP in the US

(Photo curtesy of www.co2airguns.net)

Related Posts:

• UMAREX H.P.P AND SA177 COMPARISON/REVIEW

Type: BB air pistol.

Manufacturer: Umarex.

Model:SA177.

Materials: Metal Slide and Polymer Frame.

Weight: 1.5 pounds.

Barrel: 4.1 inches, steel, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto blowback, double action.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 19 rounds

FPS: 400

Trigger Pull: This gun has a heavy trigger pull, the first 3/4 of the trigger pull actuates the hammer with a noticeable click when the hammer is all the way back and ready to fire. The last part of the trigger pull is much lighter. With practice you will be able to engage the hammer and then fire the gun in a kind of simulated single action mode.

Accuracy: Medium.

Build Quality: In its price range this air gun offers good build quality and value, it feels solid and well built, even the magazine is metal.

Realism: Even though this gun is not an actual licensed copy of a Glock 17C, it does resemble one very closely. There is good detail with a cut-out ejection port, concealed CO2 cartridge, trigger safety, and realistic larger barrel opening, making this Replica Airgun look very close to the genuine Glock.

Purchased this gun from: The Replica Airguns Store

Pros:

• Well priced for what you get.

• Metal and Polymer construction like the real Glock.

• Would make an excellent training gun as it functions and looks much like the real Glock handgun.

• Good realism: Cut out slide ejection port, large barrel opening, concealed CO2 with flush magazine, safety on trigger.

• Nice fiber optic sights.

• Has good power to CO2 usage ratio, can get around 100 shots per CO2 cartridge.

• Picatinny rail for accessories like Laser sights and tactical lights.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• The trigger pull is a bit heavy making accuracy somewhat hard at first, once you get used to the break point, it gets easier to shoot.

• The slide spring is very light so the snap back is slow, it's not noticeable when you are shooting the airgun but more so when you release the slide with the slide release.

Comments:

I really like this Umarex air gun mostly because they put a lot of attention into the detail making this Glock Replica Blowback BB Airgun a treat to own and shoot. It's priced right so just about anyone can own one and once you get used to the trigger break point it makes for a decently accurate action plinker.

Here is the Vimeo Field Test Video for this Airgun:

Buy BB Guns in Canada

Buy BB Guns in the US

Type: BB air pistol.

Manufacturer: Cybergun.

Model:Sig Sauer X-Five P226.

Materials: 99% all metal build.

Weight: 2.6 pounds.

Barrel: 4.4 inches, brass, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto blowback, double and single action.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 18 rounds

FPS: 330

Trigger Pull: The trigger pull is what you would expect from a real automatic pistol, in single action mode it is light and short.

Accuracy: Very good.

Build Quality: Excellent, with almost all metal construction, good weight and craftsmanship.

Realism: This is as close as you can come to the look, weight, feel, and action of the real Sig Sauer X-Five. P226!

Available From: The Replica Airguns Store

Pros:

• Extremely realistic airgun replica of the original Sig Sauer X-Five P226.

• All metal construction.

• Would make an excellent training gun as it functions just like a real automatic handgun.

• Blowback action is very firm adding to the realism of shooting this weapon.

• Field strips just like the real Sig Sauer X-Five P226.

• Carries Sig Sauer licensed trademarks

Cons:

• It goes through CO2 very fast.

• When the magazine releases, it simply drops out, no spring to it.

• No adjustable sights.

Comments:

This BB air pistol is styled after many modern blowback airsoft pistols, this means it functions very similarly to the real steel. It is a very hefty gun made almost entirely from metal and has a very snappy blowback action which adds to its shooting realism. Even the magazine looks and feels like a real 9mm magazine with similar weight and dimensions. The Cybergun Sig Sauer X-Five shoots very accurately for a BB airgun and has fairly decent power considering it's blowback function, this does result in heavy usage of CO2. I was able to get about 3 magazines out of a CO2 cartridge. This is one of my favorite airguns because it is so true to form and function.:

Buy this gun in Canada

Buy this gun in the US

Type: BB air rifle.

Manufacturer: Umarex.

Model:H&K MP5K PDW

Materials: Ppolymer shell, metal inner frame, metal trigger, metal cocking handle, metal but-plate.

Weight: 2.4 pounds.

Barrel: 9.75 inches, metal, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto blowback.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 40 rounds

FPS: 400

Trigger Pull: Long and hard (trigger actuates the barrel forward allowing a BB to load and then snapping back to activate the CO2 release).

Accuracy: Medium to good.

Build Quality: Lots of plastic but it does not feel cheap, the internal mechanical parts and frame appear to be made of out of metals.

Realism: Even though there is a lot of plastic this is a 1 to 1 scale replica with full H&K licensing. It is a very accurate replica of the original.

Available From: The Replica Airguns Store

Pros:

• Being able to own an H&K MP5 for just over $100.

• High capacity 40 round magazine.

• Blowback action gives some feedback.

• Very nice folding stock.

Cons:

• Does not come with picatinny rail adapter for Red Dot or scope accessory.

• Blowback does not operate action.

• Mainly plastic.

• CO2 hard to get to.

Comments:

The Umarex H&K MP5K PDW 4.5mm BB Replica is a very realistic BB Repeater. It's fun to shoot and seems to have an endless magazine. The Blowback does give it s little bit of recoil when you have a fresh CO2, just don't expect too much.

The outer shell of the gun is mainly made out of plastic but for about $125 you really can't expect an all metal version.

If you're looking for a true Tactical styled BB gun, this would make an excellent choice.

Buy this gun in Canada

Buy this gun in the US

Type: BB machine gun
Manufacturer: Umarex.
Model: Steel Storm.
Materials: Polymer shell, metal inner frame, metal trigger, mainly metal CO2 magazine.
Weight: 2.8 pounds.
Barrel: 7.5 inches, metal, non-rifled.
Propulsion: CO2 x2.
Action: Semi auto, fully auto - 6 round burst, blowback.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 300 in internal hopper, 30 in spring fed magazine (hopper gravity feeds magazine when spring retracted).
FPS: 430.
Trigger Pull: Very light.
Accuracy: Excellent in both single shot and 6 round burst mode!
Build Quality: This airgun is made in Japan and even though the external shell is made out of polymer, it still has a very solid feel.
Realism: This gun is not a direct replica but it does share similarities to the HK MP7A1 (4.6x30mm).
Purchased this gun from: The Replica Airguns Store

Pros:

• Excellent value for the money.
• Very accurate in both single and 6 round burst modes.
• Super fun to shoot.
• High rate of fire in full auto mode.
• Picatinny rails on the top and bottom for accessories.
• High FPS for a blowback gun.

Cons:

• Mainly polymer shell.
• Uses lots of CO2 (to be expected)
• No but-stock or way to add a but-stock.
• No adjustable sites. (a Red Dot scope is perfect for this airgun)
  

Comments:
The gun is plastic based but seems to be well built and has some weight to it. The design and functionality is well thought out and for the price of under $100 you can't rally ask for much more.

The rate of fire is fairly fast and there is only a small amount of blowback feel probably due to the weight of the gun. The Steel Storm is surprisingly loud, so shooting in a residential neighborhood may not be the best place to empty the two CO2 cartridges! I was able to get around 200 rounds from the dual CO2 cartridges, most of which were shot in full auto 6 round burst mode.

It would have been nice to have the BBs in the pull out magazine but the gravity fed hopper makes more sense feeding into the internal lower 30 round spring fed magazine.

The Umarex Steel Storm Full Auto CO2 BB Gun is very fun to shoot and is well worth the small amount of cost. So go get one!

My YouTube Videos for this Airgun:

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• TWO NEW AIRGUNS - UMAREX PPK/S AND UMAREX BERETTA ELITE II
• UMAREX WALTHER PPK/S BLOWBACK CO2 BB PISTOL REVIEW

This is a video I posted on YouTube a while back that has gotten a lot of views (Now Over 300,000). It's basically me and a friend shooting a couple of guns. The first set of guns (One in each hand - Tomb Raider Style) are two Walther CP99 Compacts made by Umarex. The CP99 Compact is a great little BB gun with a very fast and light trigger pull.

Next up is another Umarex product, a Walther PPK. This one is moded to fire Full Auto, making it one of the smallest Full Auto BB Guns. Too bad it's all over so fast! I'll look at doing some proper reviews of these fine Airguns down the road...

Buy this gun in Canada   -   Buy this gun in the US

Buy this gun in Canada   -   Buy this gun in the US