I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)
This isn't an Airsoft review just yet but I will be reviewing the WE SCAR Gas Blowback 6mm Airsoft Rifle next week, I just purchased this one used from another fellow YouTuber "FuzzyDicePimp" who was gracious enough to sell me his.
You will have to bare with me a bit on this first review as I more experience with Airguns so I think my first Airsoft review may be a bit more of me comparing the WE AWSS SCAR-L to my airguns but then again I don't really have that many tactical rifle styled air guns to compare it to.
The WE SCAR I am reviewing is a generation 3 with the closed bolt system, it came with a gas magazine but I purchased a couple of CO2 mags as that is more what I am use to. So we will see if I can get a propane converter and I can do a comparison of the two magazines in my review.
My first impression of this gun is "WOW" FuzzyDicePimp sent it to me with some juice in the magazine so I shot a few rounds through it. I had some .12 gram 6mm Airsoft BB's lying around and I also had some 6mm steel ball bearings, both of these really seemed to shoot hard and the blowback on the WE SCAR is very solid.
Check back next week for more on this very nice Airsoft Rifle.
Click here to check out my Table Top Review for the Baikal Drozd Blackbird
I'm kind of doing this one backwards this time around. I was going to do the table top review of the Baikal Drozd Blackbird first but the weather was just too nice to pass up today to not get outside and give this gun a thorough testing.
I will be posting the table top review in a few days with all the specification (Here it is now) but if you're looking for some basic info on the Blackbird you can checkout our online store where you can find some statistics on the Drozd Blackbird and you can also checkout my Drozd Classic Review where I do a short comparison between the Drozd Classic and the newer updated Blackbird version.
I had a lot of fun shooting this gun, it lays down a lot of steel in a very short amount of time and has a virtually endless 900 round BB hopper that just keeps on going. During my testing I shot close to 400 rounds or more using one 88 gram CO2 cartridge and even near the end the Baikal Drozd Blackbird had pretty good feet per second performance.
My Baikal Blackbird does have some upgrades: (JimC Barrel, Full Auto-High RPM Mod Chip, Added Accessory Rails, Red Dot Scope, Tactical Light, Laser and Bulk Air kit) but the stock version is "almost" as fun :)
Enjoy this Vimeo video, it was crazy fun to make!
First off, make sure to checkout my Table Top Review for the Crosman NightStalker for all the specifications and details on it.
In this Filed Test Review of the Crosman NightStalker .177 caliber pellet shooting air rifle I shoot 5 rounds through the Chronograph to get a real world average FPS of this detuned Canadian version. As expected the CX4 Storm replica does not get anywhere close the 580 FPS the non-regulated version claims to get and even with fairly light 6.9 grain pellets I got an average of just over 400 FPS, also keep in mind I have re-tuned this air rifle a bit to get somewhat higher Feet Per Second performance then the stock Canadian version even if it's not a lot.
Unlike the Umarex Beretta CX4 Storm I also Field Tested, the Crosman CX4 replica air rifle was not so reliable for me when it came to operation, I had several misfires and failures to load which was not what I was expecting since I had shot this gun many times before with very different results. The Crosman NightStalker uses a rotary magazine system which in theory should work pretty well but maybe due to my pellet choice this time around I found the NightStalker almost painful to shoot and I'm not sure why it was acting up so much for me?
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
During my Accuracy Test using a the Red Dot Scope from 30 feet out in a semi-rested position, I got pretty good results which was a bit of a relief, right around a one inch 12 round grouping. Again this airgun is made for fun and if all was working well I should have been able to empty the 12 round magazine fast and precise but not today. I would not recommend the Night Stalker for any type of small pest control because it is a bit underpowered, but for target practice and plinking it is well suited
As far as recommending this gun, I think if you can get your hands on a used one you should fair pretty well as long as yours does not act up like mine was on this day and time. If you can find the higher FPS version then it would be a nice upgrade to the one I was testing. The original price point for the Crosman NightStalker was not expensive so don't pay too much if you do plan on getting one and expect to play around with pellet choice till you find one it likes best.
My Vimeo Video Table Top Review of the Crosman NightStalker Pellet Rifle:
First off, make sure to checkout my Table Top Review for the Umarex Beretta CX4 Storm for all the specifications and details on it.
In this Field Test Review of the Beretta CX4 Storm .177 caliber pellet shooting air rifle I shoot 5 rounds through the Chronograph to get a real world average FPS of this detuned Canadian version. As expected the Beretta CX4 Storm does not get anywhere close the 600 FPS the non-regulated version claims to get and even with fairly light 6.9 grain pellets I got an average of just under 400 FPS, perhaps a little too aggressive with the Canadian regulating of the CO2. I would have liked to have seen much better Feet Per Second performance from the pellet shooting Umarex CX4 Storm.
On the other hand this CX4 replica air rifle was incredibly reliable when it came to operation, I did not have even one misfire or failure to load a round even with the rather unusual 30 round belt-fed magazine, which one might think would be prone to problems. The Umarex Beretta CX4 Storm has a very snappy feel with its blowback operation that gives you a confident feeling when shooting and the 8 pound trigger seems to actually lighten up the faster you shot it :)
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
During my Accuracy Test using a magnified scope from 30 feet out in a semi-rested position, I got pretty decent results but nothing amazing, just over a one inch 12 round grouping. Again this airgun is made for fun and you can really empty the 30 round magazine fast and with good precision. I would not recommend it for any type of small pest control because it is a bit underpowered but for target practice and plinking it works very well.
As far as recommending this gun, I think it is very well made and it performs excellent, if you can get your hands on the higher FPS version then it would be a nice upgrade to the one I was testing. The price may be a tad high but it really is a very good quality air rifle overall.
My Vimeo Video Table Top Review of the Umarex Beretta CX4 Storm Pellet Rifle:
Make sure to checkout my review of the 6 inch Silver and 8 inch Black Dan Wesson Revolvers also!
Type: BB air Revolvers.
Manufacturer: ASG.
Model: Dan Wesson 2.5 inch Silver & 4 inch Black.
Materials: Mostly Metal.
Weight: 1.9 pounds.
Barrel: Metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto, single and double action.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 6 rounds.
FPS: 320-350.
Trigger Pull: The ASG Dan Wesson Revolvers have very predictable triggers with the single action having a lighter pull as you would expect. Double action mode is very usable without a lot of extra pressure required. Shooting this gun in single action is a lot of fun, kind of like the old west days!
Accuracy: I shot the pair of Dan Wesson Revolvers at a target from 20 feet out in a free standing position, and they performed well getting close to 2 inch groupings pretty well centered on target. The sights are adjustable for elevation and windage so if you find yours shoots off just a bit, you can easily adjust them. My Chrony testing with a six shot averaged result where 327 fps for the 2.5 inch and 345 fps for the 4 inch Dan Wesson's.
Build Quality: These fine revolvers are well built, just like their Dan Wesson 6 inch Silver & 8 inch Black counterparts. The fit and finish looks very nice on both of them and they performed very well without any problems loading or shooting them.
Realism: The ASG Dan Wesson BB revolvers are as close as you can get to a real six shooter, ASG didn't leave any detail out and thought of a few I may have never even dreamt up! Loading and ejecting actual brass shells into the cylinder makes you feel like this gun is much more then an unassuming airgun! One of my favorite airgun revolvers for sure!
Purchased From: The Replica Airguns Store.
Pros:
It's a revolver with actual brass shells giving you the feeling of a real 6 shooter!
Almost all metal design.
lots of detail in this gun, very well made, fit and finish is excellent.
Fully adjustable sights.
Good accuracy even to further out distances.
Single and double action.
Can add the included accessory rail for more add on options.
If I could have dreamt up this gun I don't think I could have done as good a job!
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Plastic CO2 screw tab.
Only shoots BB's, would have been cool to shoot pellets too.
2.5 inch version does not have the recessed barrel.
Comments:
I'm not really a revolver person, but the Dan Wesson's really look good and are very fun to shoot making these guns a really nice change from the usual semi auto pistols I usually like to purchase and shoot! And with 4 barrel length and various designs to choose from, it shouldn't be too hard to find one that you like. Heck I like them all!
My Vimeo Video Review for these amazingly real Revolvers:
Type: Pellet air rifle.
Manufacturer:Kimar.
Model:K 760.
Materials: Metal & plastic.
Weight: About 3+ pounds.
Barrel: 14 inches, metal-rifled.
Propulsion: Spring piston.
Action: Single shot.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 1 round.
FPS: 450.
Trigger Pull: The trigger pull on the Kimar Model K 760 is a bit stiff but on a beginner gun I would recommend the trigger to be on the heavy side for safety reasons and also to teach correct trigger control. It did not seem to effect my shooting at all which was nice.
Accuracy: Very good, I was surprised at the tight group I got from a semi rested position and with open sights, I nearly got a 3/4 inch group from 30 feet out which is about the best I can expect from just about any gun I have shot in the same manner. The Kimar Model K 760 spring piston break barrel rifle also shot true to it's claimed feet per second rating and got right around the 450 fps velocity mark.
Build Quality: The Kimar K 760 .177 air rifle is not going to win any prizes for style or craftsmanship but it gets the job done and in about as simple a manner as is required. With that said, what can really go wrong with it?Crank the barrel and pull the trigger. The lack of a safety does not really bother me as I never ever trust a safety and it's always good to learn how to keep a gun safe at all times even when you "believe" it is not loaded or ready to shoot. There is some plastic found on the Kimar K 760 like in the sights and the stock but the mechanical parts are all metal including the trigger.
Purchased From: The Replica Airguns Store.
Pros:
Inexpensive spring piston rifle.
Reasonable quality for the money.
Synthetic stock good in all elements.
I pump - 1 shot.
Decent FPS, could be used on small game with practice.
Very good accuracy even with open sights.
Adjustable rear sight for windage and elevation.
Very compact and easy cocking effort - good for younger shooters.
Made in Italy
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Very basic design, no frills.
No safety or trigger adjustments.
No ability to mount a scope.
Comments:
Coming in at around $50, you can not ask the world from the Kimar Mod. K 760 .177 Caliber Spring Piston Rifle! What you can ask for is for decent accuracy and usable fps, and that's exactly what you are going to get from the Kimar K 760. This break barrel air rifle is really perfect for a beginner shooter on a budget or even for someone who may want to pack it around in some ugly situations where you wouldn't want to subject your high priced top quality air rifle. For the money you really can't lose with this one!
Type: Pellet air pistol.
Manufacturer:Umarex.
Model:Beretta M 92FS.
Materials: Mostly metal construction.
Weight: 2.9 pounds.
Barrel: 4.5 inches, metal rifled.
Propulsion: CO2 x 1.
Action: Semi auto, single and double action.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 8 rotary magazine.
FPS: 425.
Trigger Pull: The Umarex Beretta M 92FS has a double action trigger and is extremely nice in both single and double action mode with the single action having the lightest pull. As this gun uses a rotary magazine, the first part of the trigger motion not only cocks the hammer but also rotates the internal 8 shot magazine.
Accuracy: I shot this air gun from 20 feet away in a free standing position at my target, and it performed well getting a mainly tight grouping with a few flyers possibly because of the awkward camera mount position I was using. I removed the camera and shot another 4 magazines in double action and was able to keep most of the pellets in a 1.5 inch group. My Chrony testing with an eight shot averaged result was 363 fps using 6.9 grain RWS pellets.
Build Quality: This is an almost all metal air gun with excellent fit and finish and a nice heavy 2.9 pound weight to it. It's made in Germany, so you know it's a quality product? The only non-metal parts to speak of are the grips which are a hard plastic or real wood depending on what version of this gun you have. The mechanics of this gun are very fluid.
Realism: The Umarex Beretta M 92 FS is a licensed replica of the real Beretta M 92FS semi auto pistol. It looks very close to the real steel with the exception of the break in the slide where the rotary magazine is accessible.
Purchased From: Used.
Pros:
All metal construction - good weight and very solid feeling gun - 2.9 pounds!
German made!
Comes in a nice hard-shell case.
Very nice looking gun with in the Matte black - Blued finish and in the two-tone Nickel.
Adjustable rear sight for windage.
Double and Single Action trigger, very smooth and light in both actions.
Ambidextrous safety just like the real steel.
Good accuracy, decent FPS for a pellet shooing pistol and very good usage of CO2 (12 magazines).
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
More expensive then many entry level guns but much higher quality.
The sights are a bit hard to see when shooting on certain darker backgrounds.
Engraving on the right side of the gun is a bit loud on the black version.
Comments:
I have to say I pretty much like most everything about this airgun; Its size, its looks, it's German build and quality and the ease in which it shoots. The Umarex Beretta M 92 FS air pistol along with the other German made Umarex rotary magazine air pistols are one of those airguns I think everyone should save up for just to have the pleasure to own and shoot. There is nothing to substitute quality and a gun like this will not only give you teh pride of ownership but also years and years of shooting enjoyment.
My Vimeo Video Review for this quality German made Beretta M 92FS Airgun:
Type: Pellet air pistol.
Manufacturer:Xisico.
Model:XSP180.
Materials: Metal & plastic.
Weight: 2.5 pounds.
Barrel: 9.1 inches, metal-rifled.
Propulsion: Spring piston.
Action: Single shot.
Ammunition Type: .22 caliber pellets. (Also available in .177 caliber)
Ammunition Capacity: 1 round.
FPS: 400+.
Trigger Pull: The trigger pull on the Xisico XSP180 is amazing right out of the box. You actually have to be very carful because it doesn't take much to release it. I like mine setup this way but you can adjust it to your shooting style.
Accuracy: Very good, I was expecting to do much worse as I am far from a spring piston expert shooter. Even though I'm not as comfortable on the springers, I found the XSP180 easy to shoot even with the heavier spring piston kick. From 30 feet out I was able to get a tight 1 inch group shooting from a semi rested position. The Xisico XSP180 surprised me yet again with 470 fps average velocities even in the large .22 caliber version I was using.
Build Quality: The Xisico is priced on the lower end for a target pistol and because of this uses perhaps a bit more plastic then similar styled pistols. That said I found the plastic to be good quality and the gun had good overall weight to it. There are times when plastic is better suited then metal and I felt it was used well in this gun. Of course there is metal internally and externally but the main shell is primarily made out of plastic. All the moving parts worked well and felt nice and tight. I did not feel any concern that this gun would let me down.
Realism: The Xisico XSP180 is not a replica of any gun that I know of but it does have a modern look to it with its elongated design and ergonomic features.
Purchased From: The Replica Airguns Store.
Pros:
Inexpensive spring piston target pistol.
Reasonable quality for the money.
I pump - 1 shot.
Comes in .177 and .22 caliber version.
Excellent FPS even in .22 caliber, well above claimed.
Very good accuracy.
Modern looking and ergonomic design.
Adjustable Trigger.
Adjustable Sights with fiber optics.
Under barrel rail mount for laser or tactical light. (may work with a sight rail)
Comfortable form fitting grips
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Lots of plastic but looks to be durable.
Grip shape will only work for right handers.
No top rail for a red dot or scope.
Safety is a bit tuff and on the ridged side.
Comments:
I wasn't expecting the world from this spring piston break barrel pistol because it is a more price conscience gun and yes it may not be as refined as the Webley Alecto I also reviewed but I have to say it performed well and exceeded my expectations in most every way. First off, when the manufacturer claims 400 fps from the .22 caliber version this usually means the absolute best case scenario! I used medium grain pellets and still got some amazing chronograph results from this spring piston shooter right up into the 470 fps range. Secondly, being a springer with a heavy recoil, I figured it would effect my shot placement but again I was surprised and shot as tight a group as I can expect from any pistol with open sights from 30 feet out. lastly, again if you can get your head around the plastic, this gun feels well made and I would expect a lot of good times shooting with it for many years. If you're on a bit of a budget but want a compact shooter you can target shoot with or even take down small to medium sized pests, then grab yourself a Xisico XSP180.
Sometimes you just got to make a video because you can and because it's just plain old fun! And that's why I made this video of me shooting some cans with dual full auto BB machine guns. One is my full auto converted and trusted Cybergun Mini UZI and the other is my newly acquired ZMZ Tyrex PPA-K-01 Russian Machine Pistol.
So sit back and enjoy, I know I did :)
Type: BB machine gun.
Manufacturer:ZMZ.
Model:Tyrex PPA-K-01.
Materials: Steel.
Weight: 3.24 pounds.
Barrel: 4.83 inches, metal non-rifled.
Propulsion: 12 gram CO2.
Action: Semi & full auto, single action.
Ammunition Type: 4.5mm steel BB.
Ammunition Capacity: 25 round magazine.
FPS: 328-394 fps.
Trigger Pull: The trigger pull on the ZMZ Tyrex PPA-K-01 is a bit on the heavy side even though it is single action only. In full auto mode this doesn't really matter too much, but in semi auto the heavy trigger can slow down how fast you can shoot your followup shots. You quickly forget about it though because you are having so much fun shooting the Tyrex :)
Accuracy: I was very impressed with the Tyrex PPA-K-01 BB machine guns accuracy in both semi and full auto. I was actually expecting it to do poorly in this area because of the sights, they are inverted or in other words when you are shooting with the stock open, the peep sight would be best suited and when shooting with the stock folded, the pistol "V" sight would be best suited. Unfortunately the setup is backwards on the BB gun version, perhaps a mixup in manufacturing? I may attempt to switch this around at some point. Even with hard to use sights, the Tyrex shot a 1.5 inch 8 shot group in semi auto from 20 feet out and a very respectable full auto burst grouping.
Build Quality: The ZMZ Tyrex PPA-K-01 is not going to win any beauty contests and it's a bit rough around the edges but everything about it is made to last. It's virtually all steel with the exception of the grips and when I say steel, I mean the real hard stuff they put in actual firearms. You won't find any zinc in this BB gun! The Tyrex feel solid and tight with no slop in the moving parts at all, and when you shoot it, it feels like the real thing, minus the loudness and extra recoil of course.
Realism: The Tyrex PPA-K-01 is a very close copy of the Kedr PP-91 (9 x 18 mm Makarov) which is also made in the Russian ZMZ factory. You can tell them apart visually by the grips but other then that they are virtually the same! Based on the quality of the steel used in this gun I would bet money that the BB gun version is made in the same assembly plant and using the same steel.
Purchased From: Private sale
Pros:
All "Steel" construction - Good weight and very solid gun.
Fit of the parts is very good.
Heavy blowback action.
Semi and full auto selectable with a nice high rate of fire in full auto.
Good accuracy in both semi and full auto.
Very Accurate Kedr PP-91replica.
Pretty easy operation.
The folding stock works very well and is very secure.
Not too bad amount off shots for this style - About 2-3 25 round magazines.
If you can find one you will be the only kid on the block with a Tyrex for sure!
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Non adjustable sights.
Peep and "V" sight should be the other way around.
CO2 access can be a bit finicky and be very careful when removing it!
Finish is a bit rough but about what you would expect from many Russian made guns.
Supper hard to find and if you do find one you will pay a lot of money for it.
Comments:
I have been wanting to get my hands on the ZMZ Tyrex PPA-K-01 BB machine gun for some time now and I was willing to pay dearly for it! I am very happy with this purchase not just as a collector piece but one that I plan to take out and shoot often. Here in Canada the real version of this gun is completely unobtainable so this will have to do and even better yet I can shoot it in my backyard! The Tyrex PPA-K-01 is very pleasing to shoot and sounds more like a suppressed real gun then a BB gun adding to the enjoyment of shooting the Tyrex. Perhaps one day I'll swap the rear sight around and really see how well this BB gun shots?
My Vimeo Video Review for the ZMZ Tyrex PPA-K-01 4.5mm BB shooting machine gun:
xProductThumbnail('productid=2930700');
Cybergun Mini UZI (Limited Time Sale - $20 OFF)
C$159.00
xAddToBag('productid=2930700');
If you haven't already checked out the main review for the RAP4 - RAP5 BB Machine Gun then make sure to read it also. This "update review" is to cover a few extra things that I didn't include in the main review like a comparison of the RAP5 to my Umarex MP5K PDW and some more video of the RAP5 shooting some cans in full auto and recorded in slow motion.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
I have also had some more time to play around with the RAP5 BB gun and get an idea of how many shots you can expect using the dual 12 gram CO2 adaptor and I also tried putting two BB's inside one shell to see how 42 rounds would work shooting in full auto.
Make sure to also checkout my update video for the RAP4-RAP5 where I compare the RAP5 to my Umarex MP5K PDW and also take out a bunch of cans...
Type: BB machine gun.
Manufacturer: RAP4.
Model: RAP5 (H&K MP5).
Materials: Metal & Polymer.
Weight: 6-7 pounds.
Barrel: 9.5 inches, metal non-rifled.
Propulsion: CO2 or bulk air.
Action: Semi & full auto, single action.
Ammunition Type: .4.5mm steel BB.
Ammunition Capacity: 21 round magazine.
FPS: 400fps.
Trigger Pull: The trigger pull on the Real Action Paintball RAP5 feels kind of like an on/off switch, even though it is not an electronic switch it kind of feels like one a bit and it seems to need some CO2 or Air pressure in order to operate. Once the pressure is there, you can engage the trigger. The trigger is fairly short and nice and light.
Accuracy: I was pretty impressed with the RAP5 BB machine guns overall accuracy. I did not have to play around to much with my Red Dot scope to get it on target and keeping it on target is easy to do in both semi and full auto modes. I was especially impressed with how well it stayed on target in full auto mode. I like the fact that it pumps out BB's very quickly and they go exactly where you want them too go.
Build Quality: I was very impressed with the overall build quality of the RAP5, it has lots of metal parts exactly where they would be metal on the real MP5 giving the RAP4-RAP5 BB machine gun a very solid feel. Even the magazines feel solid and are made with metal. I was bit concerned about how the RAP5 would feed and shoot the BB & casing combination but it really seemed to work well and the combined full auto and ejecting casings makes the RAP5 a total gas to shoot!
Realism: The RAP5 BB machine gun is extremely realistic, you can even mix and match real H&K MP5 accessory parts! The only way you can tell its not the real steel is the small ejection port where the .43 caliber casings fly out, and they really come out with some momentum! Other then that this BB machine gun is very realistic in how it operates, looks and feels.
Purchased From: RAP4 (Real Action Paintball)
Pros:
Extremely realistic replica of a real H&K MP5.
Lots of metal on this gun.
Ejecting casings makes for a realistic experience.
Semi and full auto selectable with a nice high rate of fire in full auto.
Can customize with actual MP5 add on parts. (stocks, rails, grips)
Good accuracy even in full auto mode.
Can use either CO2 or bulk-air power sources.
Decent 400fps for a full auto machine gun.
Cons:
Not a cheap gun!
Hunting down the ejected casings can be a bit of a chore but they are not expensive to buy.
.43 caliber ejection port on the side is a bit of a giveaway.
Would have liked more options of power-sources when purchasing. (Dual 12 gram CO2 adaptor should come standard)
Comments:
When I heard about this BB machine gun, I new I had to have it and mostly because of the way it feeds and ejects the shell casings, much like a real gun! I'm also a big fan of the H&K MP5 styled rifle and PDW version. I was genuinely impressed with everything about this BB shooter; design, quality, realism and shoot-ability and I hope to one day get the RAP4 (M4 styled) version of this gun which uses the same feeding mechanism. If you want the most realistic looking and operating full auto 4.5mm BB machine gun you can get then this is really it.
Type: .22 caliber rifle.
Manufacturer:ISSC.
Model:MK22.
Materials: Metal & Polymer.
Weight: 6.5 pounds.
Barrel: 16 inches, metal rifled.
Propulsion: Gun Powder.
Action: Semi auto, single action.
Ammunition Type: .22LR caliber rimfire.
Ammunition Capacity: 22 round magazine.
FPS: 1,138 - 1255.
Trigger Pull: The trigger pull on the ISSC MK22 is fairly short with a bit of noticeable break point in it but overall is pretty light. I get the feeling that this may be a striker based action because of the slight tension before the release.
Accuracy: I put about 300 rounds through the ISSC MK22 and took some time getting used to how it felt and also sighting in the sights on my 4 power scope. Once I felt comfortable I setup a new target and placed a full magazine (22 shots) all with in a 2 inch group from 20 yards out (60 feet). I was in a seated position using and elbow based rest. I was very happy with these results.
Build Quality: To me the ISSC MK22 SCAR clone feels like the real deal, it's not till you load it up and fire off a few rounds that you can even tell you are shooting the .22 caliber rimefire version. The MK22 has a lot of metal parts and the fit and finish is very good. You do have to use quality .22 caliber ammo in this guns for the best results because it can be a bit picky and also make sure to also take a bit of extra time when loading your magazines to ensure the ammo is set well to the back of the magazine. I'm not saying you can't use the cheap box ammo but you will have to be prepared to clear a few rounds from time to time.
Realism: It doesn't get any more real than this, the ISSC MK22 is basically an FN SCAR in a smaller cheaper .22LR caliber. But if you want to spend $3000 on the real thing and several hundred dollars per day at the range in ammo then get the full NATO round firing version. Unfortunately my pocket book does not allow for this and I don't think we can even get the larger caliber versions here in Canada. I also go to an indoor range that allows .22 caliber rifles to be used alongside the pistols which makes getting out and using the ISSC MK22 that much easier.
Purchased From: ???
Pros:
One fifth the price of the NATO round firing version to purchase and operate.
Mostly metal construction with good usage of polymer in the right places to keep it light.
Lots of rails to mount just about any type of accessory you can think of.
Nice high capacity 22 round magazine to keep the shoots going.
Versatile flip up multi position sights for pistol or rifle based target acquiring.
Fully adjustable stock with three length positions and check hight position, can also be folded in.
Most bad ass looking .22 caliber rimefire rifle around.
Made in Germany
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Not the Cheapest .22LR on the market in this category but well worth the added price tag.
Can be a bit picky about which bullet's you use in it and how you load the magazine.
The rear stock cheek rest is a bit high when using the pistol sights or a low rise scope, you may need a riser under your scope.
Comments:
As you know, I don't do a lot of actual "real gun" reviews, the ones that use gun powder and shoot lead bullets. I do have a very soft spot for the .22 caliber rifles for a few reasons. Firstly, they are usually more inexpensive to buy and also to shoot as the ammo is only a fraction of the cost of the larger caliber ammo. .22 rimefire guns can also be shot in more areas and at most gun ranges so you are more likely to get better use out of it in the long run. The ISSC MK22 FN SCAR clone is definitely the most impressive .22 caliber tactical styled rifle you can get, at least in Canada and even though it is at the top of the price rang in it's category it is well worth it because it is really a very high quality gun at a reasonable price.
My Vimeo Video Review for the ISSC MK22 FN SCAR Type .22LR:
Type: Blank Gun.
Manufacturer:Retay.
Model:CS9.
Materials: Mostly Metal.
Weight: 2 pounds.
Barrel: Semi plugged - front firing.
Propulsion: Gun powder.
Action: Semi auto single action only.
Ammunition Type: 9mm P.A.K. blanks.
Ammunition Capacity: 13+1 round magazine.
FPS: N/A.
Trigger Pull: The trigger pull on the CS9 is fairly light with a shorter pull. There is no double action on the Retay CS9 but it does have an exposed hammer making it easy to pull back and fire if you have a round already in the chamber but your gun is de-cocked.
Accuracy: N/A.
Build Quality: The build quality is similar to that of my EKOL blank guns which is what you would expect since they are both Turkish made guns. The Retay CS9 is well built and uses good quality materials with pretty decent fit and finish, this gun is mostly metal and has good heft for its small size weighing in at 2 pounds. My review unit is the Gloss black version but keep in mind we will be selling the CS9 in Matte Black and Satin only. The Retay CS9 performed very well for me and had no problems with chambering, firing and ejecting rounds when I tested it, just like the other Retay blank guns I tested before it
Realism: The Retay CS9, Smith & Wesson CS9 copy is a pretty good Smith & Wesson CS9 replica with the exception of the de-cocker and a few other minor differences. The basic gun shape and main features are similar to that of a Smith & Wesson CS9.
Purchased From: the Replica Airguns Store.
Pros:
Good hefty 2 pound weight.
Almost all metal build
Black finish looks really nice on this gun - Satin would give it a nice tow tone look also.
Decent replica of the Smith & Wesson CS9 semi auto pistol.
Smallish gun but still holds 13+1 double stack magazine.
Performed very well in my tests with no chambering, firing or ejection problems.
Easy to field strip with the supplied tool.
Fills the void the Zoraki 914 left behind in Canada.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Barrel back pressure screw needs to be removed in order to use flare adaptor.
Could have been just a bit closer to the real CS9.
No Manual or cleaning rod included.
Comments:
I wasn't sure about the Retay CS9 at first and kind of preferred my Retay Baron HK and Eagle over the CS9 at first but this smaller Retay has really grown on me. It's almost the perfect size yet it retains a very compact frame while still having a mid sized guns weight and magazine capacity. And as mentioned, it kind of fills the void that the Zoraki 914 left behind when it was reclassified as a prohibited firearm in Canada. I will most likely be picking myself up a Satin version of this one to go with my black Retay CS9, hey you can't lose at this very good price.
My Vimeo Video Review of the Retay Baron HK Sig Sauer P228 copy) Blank Gun:
Type: Blank Gun.
Manufacturer:Retay.
Model:Baron HK.
Materials: Mostly Metal.
Weight: 2.3 pounds.
Barrel: Semi plugged - front firing.
Propulsion: Gun powder.
Action: Semi auto single action only.
Ammunition Type: 9mm P.A.K. blanks.
Ammunition Capacity: 14+1 round magazine.
FPS: N/A.
Trigger Pull: The trigger pull on the Retay Baron HK is about light to medium with a fairly short pull. The actual real steel Sig Sauer P228 would have both single and double action but many semi auto guns shoot in single or double action only.
Accuracy: N/A.
Build Quality: The build quality is similar to that of my EKOL blank guns which makes sense since they are both Turkish made guns. The Retay Baron HK is well built and uses good quality materials with pretty decent fit and finish, this gun is almost all metal and has good heft to it weighing in at 2.3 pounds. The matte black finish on this gun is pretty close to what you would find on a blued gun but with less shine to it, keep in mind we will be selling the Baron HK's in Matte Black and Satin. The Retay Baron HK performed very well for me and had no problems with loading, firing and ejecting rounds when I tested it.
Realism: The Retay Baron HK Sig Sauer P228 copy is a really good Sig Sauer P228 replica. The grips could even almost be swapped with a real Sig Sauer P228 grip if the screw holes where just a bit closer to the center of the hand grip. The basic gun shape and main features are almost dead on to the real Sig Sauer P228 including the de-cocker, slide catch and take down leaver. Internally the gun does differ as the Baron HK has a single action only trigger and a fixed barrel.
Purchased From: the Replica Airguns Store.
Pros:
Good hefty 2.3 pound weight.
Matte black finish looks close to blued finish, satin finish also available.
Good replica of the Sig Sauer P228 semi auto pistol.
Working de-cocker.
14+1 round double stack magazine similar to real steel version.
Performed very well in my tests with no chambering, firing or ejection problems.
Easy to field strip.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Barrel back pressure screw needs to be removed in order to use flare adaptor.
Grips are a bit shiny and the texture takes some getting used to.
No Manual or cleaning rod included.
Comments:
This gun for me was another must have blank shooter as I already own a real steal 9mm version of this gun (My Norinco NP-34), I just really like the look of Sig Sauer semi auto pistols! I will be getting another Retay Barron HK but this time in the satin finish. Because I have the real gun version, I was able to see how really close this gun is to an actual Sig in looks weight and handling. As a training gun, this is ideal as there is much less risk when using blank guns for practicing things like holster draws or even basic gun control drills.
My Vimeo Video Review of the Retay Baron HK Sig Sauer P228 copy) Blank Gun:
Type: Blank Gun.
Manufacturer:Retay.
Model:Eagle.
Materials: Mostly Metal.
Weight: 3.1 pounds.
Barrel: Semi plugged - front firing.
Propulsion: Gun powder.
Action: Semi auto single & double action.
Ammunition Type: 9mm P.A.K. blanks.
Ammunition Capacity: 18+1 round magazine.
FPS: N/A.
Trigger Pull: The trigger pull on the Retay is about medium pull, it is a bit heavier in double action mode as would be expected and I found that the release is fairly near the very end of the pull. I'm pretty sure the real Desert Eagle only has single action operation but being able to shoot in both actions is kind of nice.
Accuracy: N/A.
Build Quality: The build quality is similar to that of my EKOL blank guns which makes sense since they are both Turkish made guns. The Retay Eagle is well built and uses good quality materials, this gun is almost all metal and has good heft to it weighing in at 3.1 pounds. The finish quality is typical of other Turkish guns - good but not perfect. The satin finish on this gun has a raw metal look but with a slight gold tint and a semi polished look, keep in mind we will be selling it in Matte Black, non-shiny Chrome and Nickel. The Retay Eagle performed very well for me and had no problems with loading, firing and ejecting rounds when I tested it.
Realism: The Retay Eagle Desert Eagle copy is a pretty decent Desert Eagle replica with a few small exceptions. Overall I would say it is slightly smaller than a real Desert Eagle and has a bit smaller handle which may be good for people with smaller hands and it also has 2 screws near the front of the slide on each side that would not be there on a real Desert Eagle.
Purchased From: the Replica Airguns Store.
Pros:
Good hefty 3.1 pound weight.
Satin finish looks good but the Nickel is going to look even better :)
Good replica of the Desert Eagle semi auto pistol.
Trigger is both single and double action.
18 round magazine is very high capacity for a pistol.
Performed very well in my tests with no chambering, firing or ejection problems.
It's a Desert Eagle for goodness sake - isn't that enough!
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Slightly smaller in size then a real Desert Eagle?
The screws on the slide are a bit out of place and would look better color matched.
Barrel back pressure screw needs to be removed to use flare adaptor
No Manual or cleaning rod included.
Comments:
This gun was a must have blank gun for me, owning a real Desert Eagle is pretty much out of the question because they are not cheap to buy and operate. For a very small fraction of the price of a real Desert Eagle I get to own the next best thing and as a matter of fact, I may just buy one in each color since the price is very affordable! As with many of the blank guns, the Retay Eagle would make an excellent prop gun for TV or Movie scenes. And you can always impress you friends by pulling out the Retay Eagle and proclaiming "That's not a gun - This is a gun!"
My Vimeo Video Review of the Retay Eagle (Desert Eagle copy) Blank Gun:
Type: Pellet air pistol.
Model:CK92.
Materials: Mostly metal.
Weight: 2.6 pounds.
Barrel: 4.25 inches, metal rifled.
Propulsion: CO2 x 1.
Action: Semi auto, single and double action.
Ammunition Type: .177 cal. pellets.
Ammunition Capacity: 8 round rotary magazine.
FPS: 394.
Trigger Pull: The trigger pull on the Crosman - Kimar CK92 is absolutely excellent! Single action is very light and smooth and double action is almost exactly the same. The CK92 has one of the lightest and smoothest double action trigers out of all my airguns and that's saying a lot!
Accuracy: I shot the Crosman - Kimar CK92 air pistol at a target from 20 feet away in a free standing position, and it performed well getting about a two inch grouping right close to the center, just to the right. Most of the rounds stayed in a one inch group while two rounds strayed away a bit. I had a very awkward grip due to my camera mount so I know this guns should get closer to a one inch grouping with some getting used to it and using a standard grip. The rear sight is adjustable for windage and elevation so hitting the bullseye would not take much work. My Chronograph testing started out a bit rough due to the 10 year absence of shooting this gun but once I blew out some of the cobwebs it settled in at around the 350 fps mark and I was also able to get 10 magazines worth of shots before I noticed a drop in performance.
Build Quality: The Crosman- Kimar CK92 is built like a tank, it is probably one of my heaviest pellet pistols weighing in at 2.6 pounds! The build quality and craftsmanship is very nice with most of the gun being made out of metal and only a couple parts made from plastic like the grips and part of the rear sight. You can really feel the quality of this gun when you pick it up and squeeze the trigger a few times.
Realism: The CK92 pellet air pistol is a very nice copy of the real steel Beretta 92FS and considering it was made some 10 years ago when most replica air guns still looked mostly like air guns. You really have to give Crosman and Kimar credit for making this gun so close to the actual Beretta 92FS. Everything is exactly where it would normally be on the real Beretta and most of the mechanical part are functional, even if they serve a different purpose as it is an airgun after all.
Purchased From: The Replica Airguns Store.
Pros:
The price is right, especially for this condition of collectors item!
All metal very heavy and well made gun.
Pellet shooting with a rifled barrel.
Fully adjustable rear sight with windage and elevation.
Decent accuracy and power and CO2 usage.
CO2 screw and tab are hidden in the handle.
Excellent trigger pull in both single and double action.
Very good Beretta 92FS replica.
Comes in a plastic case.
Rare collectors opportunity.
Made in Italy
Cons:
Have to use narrow headed CO2, can be a bit tricky to load until you get used to it
This is a 10 year old gun and hard to tell how reliable it will be because of its age?
When they are gone, they are gone! No more in this kind of shape.
Comments:
This was a very different review for me to do, a part of me wanted to just put my two CK92's away in a safe place and just keep them as collectors guns but I was also very curious to see if the CK92 performed as well as it looked and felt. Curiosity got the best of me as you can see and I am glad I ended up testing at least my Chrome CK92 because it was a real joy to shoot and it didn't let me down in any way. I am not going to recommend the CK92 airgun for anyone who plans to shot it regularly because I really believe that 10 year old valves and seals have a lot more potential to fail then a new airgun and getting replacement part will not be easy for this very fine air pistol. That said, you may get lucky because it's a very well made air gun. Personally I am going to put both my Chrome and Black Crosman - Kimar CK92's in a nice safe place and treasure them like you would anything rare and valuable. I think these guns are selling at a steel of a price right now and when they are all gone I just know people will be offering me several times the price I paid for my personal Chrome and Black Crosman - Kimar CK92's, and I will tell you my answer right now... Sorry, these guns are not for sale.
As promised, I went out and picked up some Reball (reusable) paintballs to try in my Tacamo T68 AK47 styled paintball rifle. I wanted to see what kind of damage they could inflict on various targets. The purpose of the Reball is mainly for practice or training use with paintball guns, they are also used in some indoor paintball facilities. Reballs have the advantage of not only being reusable but also not making a lot of mess.
Another benefit is that Reballs do not break apart and so they will deliver more energy on target which may be useful in a self defense situation with a high fps Paintball gun. Now I am not recommending these guns in any ways to be used for self defense or non-lethal use but other people have suggested it to me, and I wanted to see what these little rubber balls could do to different targets.
Keep in mind I was not looking for penetration as that is not the purpose of a "traumatic round", such as a rubber bullet. Rubber bullets are not supposed to penetrate but rather stun a person.
I found the Rubber Reball Paintballs to be about the same weight as standard paintballs and so they shoot about the same fps which in my gun was about 350 fps.
In conclusion, I would not want to be shot with a Reball out of a high fps paintball gun, as for stopping an intruder, maybe? You most certainly would be able to pick them out of a police lineup because they would be riddled with red welts :)
Type: Paintball air rifle.
Manufacturer: Tacamo (unbranded).
Model: T86 AK47.
Materials: Metal & wood build.
Weight: 8 pounds.
Barrel: 14 inches, non-rifled.
Propulsion: CO2 or compressed air.
Action: Semi auto blowback, single action only.
Ammunition Type: Paintball marker .68 caliber.
Ammunition Capacity: Dependent on hopper system used.
FPS: 350
Trigger Pull: The trigger pull on the Tacamo T68 AK-47 is what you would expect from a blowback operated single action gun, easy and light with just a bit of creep to it. The action of the bolt gives the gun a nice little snap to it and with the extra CO2 needed to push out the large .68 caliber paintball markers you also get a little bit of recoil adding to the shooting enjoyment.
Accuracy: I'm not going to spend a lot of time talking about accuracy with the Tacamo T68 Paintball gun as I don't really have any other references to base it on but I can say I was pretty impressed with how well it stayed on target considering most paintball ammo is not really uniform in shape which effects accuracy a lot. I was also expecting lower FPS performance closer to the 250-300 FPS range but I got nice consistent 350 FPS shots with the Tacamo T68 AK47.
Build Quality: Very nice, the Tacamo T68 AK-47 is made of mostly metal and wood with many actual parts from a real AK 47 including the wood handle and stock, rear sight, safety, magazine and authentic strap. The Tacamo Paintball rifle has some weight to it also making the AK 47 replica feel solid and durable.
Realism: Again the Tacamo AK 47 replica is made of lots of real AK47 parts making this gun very realistic, you can't really get around the telltale Paintball marker top loading tube and CO2 hookups but other then that the Tacamo AK47 really looks like a an actual AK47, so if you want to play the bad guy you can definitely pull it off with this replica paintball rifle.
Available From: The Replica Airguns Store
Pros:
Cons:
Comments:
I really like my Tacamo T68 AK47 Paintball rifle, again I have virtually no experience with Paintball guns so my reasons for liking it are mostly based on the all metal and wood build and real AK 47 look of the Tacamo T68 AK47. That said I thought it performed pretty good overall getting decent accuracy and shooting well into the 300+ FPS. I may pull this one out once in a while even to shot some various targets just because it does have a more realistic recoil feel when shooting then my smaller caliber pellet and BB airguns.
