Type: BB Revolver.

Manufacturer:Gletcher.

Model: NGT Silver (Replica of Nagant M1895 Revolver).

Materials: Metal & plastic.

Weight: 1.54 pounds (700 grams).

Barrel: 4 inches, smooth bore (Steel inner barrel).

Propulsion: 12 gram CO2.

Action: Revolver - single and double action.

Ammunition Type: 4.5mm Steel BB's.

Ammunition Capacity: 7 rounds.

FPS: 361fps (110m)

Trigger Pull: The trigger pull on the Gletcher NGT Silver CO2 BB Revolver is nice and crisp in both single and double action, there is virtually no trigger wiggle and the trigger pull is decent in double action while much longer and of course nice and light in single action as expected. You will want to pre-cock the hammer for accurate single action shooting but have the option of shooting double action for any action shooting you may want to do. Keep in mind you will have to individually reload each round.

Accuracy: I have not done any shooting so far with this Gletcher revolver due to some pretty awful weather conditions. I expect it will shoot nice since it has a fairly long sight radius and the open iron sights are conducive to precise shooting.

Build Quality: The Gletcher NGT Silver CO2 BB Revolver is really well made, you can tell by it's solid weight for a fairly small pistol, all of the mechanical parts feel smooth and responsive. Everything that would be metal on the real M1895 Revolver is metal including the solid one piece cylinder. Yes the grips are imitation wood but this is to be expected. The sliver finish looks great and I like the black contrasting parts that really highlight this gun.

Realism: I've have not had the opportunity to actually put my hands on a real steel Nagant M1895 Revolver but from the photos I have viewed online, the Gletcher NGT Silver is very accurate in terms of being a BB replica. Of course the shells fit steel BB's internally and the barrel has been downscale to shoot 4.5mm Steel BB's but other than that it is very difficult to tell it from a real Nagant M1895 Revolver. Even the barrel opening is recessed and looks true to scale for the original rounds used in this revolver and you can remove the one piece cylinder similar to the real version.

Pros:

• Beautiful Silver finish.

• Very solid and weighty gun.

• Hammer and trigger actions are very crisp, virtually no wiggle. 

• CO2 is well hidden.

• Recessed barrel looks great.

• 7 round cylinder instead of 6 like the other shell loading.

• Cylinder can be removed.

• Shoots in both signal and double action.

• Grip is nice and small so great for shooters with small.

• Shooting performance pros yet to be determined…

Cons:

• Non adjustable sights. (Perhaps like original)

• No speed loading on this one, one shell at a time, so make your shots count.

• Shooting performance cons yet to be determined…

Comments:

The Gletcher NGT Silver CO2 BB Revolver is yet another addition of shell loading revolvers like the Dan Wesson and KWC 357 based revolvers, with the exception that the Gletcher NGT is more of a blast from the past and even though it comes in at a much more compact size, it holds an additional round! Another note worthy point is the fact that Gletcher has somehow figured out a way to reduce the CO2 release valve giving the Gletcher NGT a more true to scale frame size, I am talking about the distance between the hammer and the cylinder. This allows for a more realistic and true to dimension replica which in this classic revolver is super important.

My Vimeo Table Top Video of the Gletcher NGT Silver CO2 BB Revolver:

Buy the Silver Gletcher NGT in Canada

Buy the Silver Gletcher NGT in the US

Buy the Gletcher NGT in Canada

Buy the Gletcher NGT in the US

Type: Blank Pistol.

Manufacturer: ME.

Model:ME 8 General 1911 (Colt 1911 A1 Replica).

Materials: Mostly Metal with some steel parts.

Weight: 2.9 pounds loaded. (1355 grams)

Barrel: Front firing. (No Red Tip)

Propulsion: Gun powder.

Action: Single action only.

Ammunition Type: 8mm P.A.K. Blanks.

Ammunition Capacity: 10+ rounds.

FPS: N/A.

Trigger Pull: The trigger pull on the ME 8 General 8mm P.A.K. Blank Pistol is exactly what you would expect from a single action only 1911 styled semi auto pistol, short and light. But not super light, it's far from a hair trigger, perhaps more of a medium pull weight for a 1911 SAO.

Accuracy: NA.

Build Quality: The overall build quality of the ME 8 General 8mm P.A.K. Blank Pistol is really very good, nothing fancy at all going on with this pistol and a lot less actual moving parts than you would find on a real steel 1911 so much less to go wrong but the metal quality and fit and finish are very good overall. You will not find a lot of actual steel in this gun other than the magazine, screws, pins and springs but again the metal is good quality and the ME 8 General 8mm P.A.K. Blank Pistol even sports real wood grips.

Realism: The ME 8 General 8mm P.A.K. Blank Pistol is a very realistic looking 1911in terms of overall looks and true to scale size and weight. As mentioned already, many of the parts are not operational but actually moulded into the gun. Like the Safety, side trigger mounted magazine release and back strap safety. You will find the actual magazine release on the bottom of the pistol grip and even thought the slide catch release is operational, there is no spring assist to lock it in the up and open position when the magazine is empty so if you want to lock the slide back you will need to manually do this.

Purchase from: Private collector.

Pros:

• Well made, materials fit and finish is all very good even though very little use of hardened steel.

• 10+ round single stack magazine is very hi-capacity.

• For a used gun it is in very good condition, not many rounds through it and well kept.

• Front firing and came with flare adaptor.

• Real wood grips.

• Made in Italy.

• It's a 1911!

Cons:

• Slide catch release, must be engaged manually.

• Many working parts are simply moulded into the gun.

• Not easily field strip-able.

Comments:

So the ME 8 General 8mm P.A.K. Blank Pistol is not the most accurate replica of a 1911 in terms of all parts being operational but it hits the major ones for me like: It's front firing, the slide will lock back, it has a true 1911 SAO trigger and for the most parts it looks and works like a 1911. Finding 1911 blank guns here in Canada is super hard and I am a big fan of 1911's so when the opportunity to pickup this gun came around I was interested even if it was not cheap. Blank guns are getting harder and harder to find here in Canada and I guess that's what is making them so appealing. Don't forget we sell the ROHM Blank guns here in our Canada Online Store and they are very good quality guns so check them out if you are in the market for a blank shooter.

My Vimeo Full Video Table Top Review for the ME 8 General 8mm P.A.K. Blank Pistol:

Buy Blank Guns in the Canada Store 

Buy Blank Guns in the US Store

A while back I made a full Table Top Review and Field Test Shooting Review for my sample - pre-production KWC Mauser M712 Broomhandle CO2 Blowback Airsoft Pistol. Well we finally got the finished product in our Canada Replica Airguns Store and not only in the 6mm Airsoft version but also the 4.5mm Steel BB versions!

I most likely will not be doing another table top review for the KWC Mauser M712 Broomhandle CO2 Blowback BB and Airsoft Pistol since I already made a fairly comprehensive Table Top Review of my sample - pre-production Airsoft unit. The only real difference I could find visually is the markings on the left side of the receiver indicating the pistol is made by KWC in Taiwan and the Caliber it shoots.

I will however be making a side by side Field Test Shooting Comparison Video to see if the production Airsoft version shoots the same as my pre-production model and also how the 4.5mm steel BB version compares in terms of fps and accuracy side by side.

We also have magazines for both of these KWC pistols in our Canada Store!

Make sure to watch my Vimeo Update Video where I show these two very realistic KWC Mauser M712 Broomhandle CO2 Blowback pistols in detail:

Buy the KWC Masuer M712 in the Canada Store

Buy the KWC Masuer M712 in the US Store

Type: Airsoft revolver.

Manufacturer:KWC.

Model:357.

Materials: Mostly metal with some plastic construction.

Weight: 2 pounds (900 grams).

Barrel: 2.25 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 6 rounds.

FPS: 360+.

Trigger Pull: The trigger pull on the KWC 357 2.5 Inch CO2 Airsoft Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357's. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.

Accuracy: This is yet to be determined but I did notice on the KWC Airsoft versions of their shell loading Airsoft Revolvers, that they do have a built in preset Hop-up by way of a small rubber bar that goes along the top of the barrel just inside the rear portion. This will create some backspin which will keep the Airsoft BB's trajectory more level but should also help them stay more accurate in general as compared to a plastic Airsoft BB that is not spinning but rather just floating through the air.

Build Quality: The KWC 357 2.5 Inch CO2 Airsoft Revolver being mostly metal has a very good build quality, perhaps even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the KWC 357 is noticeably more! The only real plastic or rubber I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable wear or sloppy workmanship.

Realism: The KWC 357 2.5 Inch CO2 Airsoft Revolver overall is a close copy a the real steel 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original 357 styled revolver it is based on. Again being all metal gives this CO2 Airsoft revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands that a real 357 magnum or even when shooting 38 special shells for that matter ;)

Available in the:Replica Airguns Store.

Pros:

• Shell loading revolver adds to the realism!

• Mostly all metal design.

• Pretty all the parts work as they would in a similar real steel revolver of this type.

• Good overall weight, Very dense because of the shorter barrel.

• Should have good overall power, accuracy and shots per CO2 (based on Colt Python testing).

• Fully adjustable rear sight for windage and elevation.

• Well hidden CO2 Screw.

• Recessed barrel.

• Not much white writing on the gun.

• Nice easy Trigger pull in both single and double action.

Cons:

• Short 2.25 inch barrel will rob power but the Dan Wesson style long barrel Airsoft revolvers are know to be a bit hot for some Airsoft games so this may be a good thing.

• Grips may be a bit large for people with small hands.

• All black sights with no white dots are not great on dark backgrounds or low lighting.

Comments:

The KWC 357 2.5 Inch CO2 Airsoft Revolver is yet another addition to the increasing lineup of shell loading revolvers available today in both Steel BB and Airsoft versions. The 2.5 inch reviewed here is meant to be the compact version with its snub nosed barrel but I would have to say it is not a small gun at all coming in at 2 pounds and with rather large grips and a pretty large cylinder to pack around. But then again, that may be just what you are looking for? The shorter barrel will lower the fps a bit which may bring it back in line with the requirements of some Airsoft fields and the addition of the built in preset Hop-up, this pistol should shoot pretty well out at medium and even longer ranges.

My Vimeo Table Top Review for the KWC 357 2.5 Inch CO2 Airsoft Revolver:

Buy Airsoft Pistols in Canada 

Buy Airsoft Pistols in the US

Buy theKWC Black 2.5 Inch Airsoft Revolver

Type: BB Airsoft Pistol.

Manufacturer: KWC.

Model:Model 226-S5 (Sig Sauer X-Five).

Materials: 99% all metal build.

Weight: 2.75 pounds.

Barrel: 4.33 inches, brass, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto blowback, double and single action.

Ammunition Type: Airsoft 6mm plastic BB's.

Ammunition Capacity: 25 rounds

FPS: 390

Trigger Pull: The trigger pull on the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol is what you would expect from a blowback pistol with true single action capability. nice and light with a short take-up in single action and also decent when shooting in double action which for the most part you will not be doing since the blowback pre-cocks the hammer for single action shooting.

Accuracy: This is yet to be determined since I have not conducted my Field Test Shooting review for the KWC Model 226-S5 Sig Sauer. Based on my previous review of the Cybergun branded and licensed Sig X-Five 4.5mm Steel BB version, it should do well with heavy blowback, reasonable power but not a lot of shots per CO2.

Build Quality: Very good, pretty much an all metal construction, good weight and craftsmanship, slide wiggle is minimal, fit and finish is good. As with many of the KWC airguns that use an electromagnetic powder coating, the finish looks great but is thin so it does wear off on the high posts and where metal on metal movement takes place.

Realism: Compared to the real steel Sig Sauer X-Five, the KWC version is pretty close, although it does have a bit different looking slide in terms of the groves or slide serration's, and of course there is no Sig Sauer licensing on the KWC version. You also do not get the ugly white warning instructions so there is a bit of a trade off here and the KWC version also comes with a fully adjustable rear sight which is nice if your aim point is off a bit. Over all the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol is super realistic with its full blowback operation, full size drop out metal magazine and ability to filed strip just like the real steel Sig Sauer it replicates.

Available From: The Replica Airguns Store

Pros:

• All metal construction - Extremely good weight and solid feeling gun. As real as you can get.

• Heavy blowback action.

• Accurate X-five replica without the Sig Licensing or white warning instructions.

• Awesome training gun.

• Both SA & DA with excellent trigger pull, very smooth and light.

• Has the fully adjustable rear sight for windage and elevation.

• Nice high capacity full size drop out metal magazine.

• Fully field strippable.

Cons:

• Top loading magazine only.

• Sacrifice some fps and shots per CO2 because of the heavy blowback but worth it.

• Finish is prone to wear on the high spots and metal on metal areas 

Comments:

I am really looking forward to my Field Test Shooting video for this Airsoft pistol, the KWC Model 226-S5 Sig Sauer is a nice big heavy pistol with lots of blowback, right up my alley! I am hoping the hop-up will keep this gun in the same accuracy zone as the 4.5mm Cybergun X-Five version, I may just have to test them head to head to find out? If you're a Sig Sauer fan like me, and require a solid useable Airsoft pistol for gaming or just plinking, the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol should do the job well and at a price point that is very reasonable.

My Vimeo Videos for the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol:

Buy the KWC Model 226-S5 in Canada 

Buy Airsoft Pistols in the US

Type: BB air revolver.

Manufacturer:KWC.

Model:357.

Materials: Mostly metal with some plastic construction.

Weight: 2.75 pounds (1218 grams).

Barrel: 5.5 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 6 rounds.

FPS: 400fps.

Trigger Pull: The trigger pull on the KWC 357 6 Inch CO2 BB Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.

Accuracy:Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.

Build Quality: The KWC 357 6 Inch CO2 BB Revolver being mostly metal has a very good build quality, perhaps even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the KWC 357 came in close to a half of a pound more! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time...

Realism: The KWC 357 6 Inch CO2 BB Revolver overall is a close copy a the real steel 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands.

Available in the:Replica Airguns Store.

Pros:

• It's a revolver with actual shells! Give you the feeling of loading and shooting a real revolver.

• Mostly all metal design.

• lots of detail, well made, Chrome looks nice, not sure if it will ear better than the black finish?

• Good overall weight, heaviest out of all the shell loaders.

• Should have good overall power, accuracy and shots per CO2 (based on Colt Python testing).

• Fully adjustable sights for windage and elevation.

• Well hidden CO2 Screw.

• Recessed barrel.

• Nice easy Trigger pull in both single and double action.

Cons:

• Grips are a bit rough.

• Grips may be a bit large for people with small hands.

• Black rear sight may not be great on dark backgrounds or low lighting.

Comments:

The ASG Dan Wesson shell loading revolvers reintroduced me to the joy of loading and shooting a revolver which up until that point was not that realistic of an experience when using a BB or Pellet revolver. The KWC 357 6 Inch CO2 BB Revolver like the Umarex Colt Python 357 has taken it up a notch by adding just a bit more overall weight, a smother trigger and hammer mechanism and styling this revolver on the Classic 357 magnum platform. And all of this for even less than the cost of the original Dan Wesson shell loading series CO2 BB revolvers. If you're a revolver fan, make sure to grab one of these, the Chrome finish is really eye catching and would make a great addition to your revolver collection for sure.

My Vimeo Table Top Review for the KWC 357 6 Inch CO2 BB Revolver:

Buy the Umarex Colt Python 357 in Canada

Buy the Umarex Colt Python 357 in the US

Some more CO2 pistols I will be doing Table Top and Field Test video reviews for in the near future. Some of them I have already reviewed in different caliber versions, either 4.5mm Steel BB or 6mm Plastic Airsoft.

From KWC I show off two revolvers styled after the 357 and if you watched my Umarex Colt Python 357 Review then you will notice the similarities between these KWC made revolvers since they are all made by KWC. The Model 357 6 inch version is finished in Chrome and made to shoot 4.5mm Steel BB's while the KWC Model 357 2.5 inch shoots 6mm Plastic BB's and is in all black. At this time I do not have these KWC revolver listed in the Replica Airguns Canada Store but should have them listed fairly soon...

I also showcase three CO2 6mm Airsoft semi auto pistols from ASG that I have already reviewed in their 4.5mm Steel BB equivalents. The ASG CZ 75 P-07 Duty Non-blowback, the ASG CZ 75 D Compact Non-blowback and the ASG Bersa BP9CC Blowback.

Make sure to watch my quick Update Vimeo Preview Video for these fine CO2 pistols to see them up close and personal...

Buy Umarex Colt Python in Canada

Buy Umarex Colt Python in the US

Buy ASG CZ 75D Compact CO2 Pistol in Canada

Buy ASG CZ 75D Compact CO2 Pistol in the US

Buy ASG CZ 75 P-07 in Canada

Buy ASG CZ 75 P-07 in the US

Buy ASG Bersa BP9CC in Canada

Buy ASG Bersa BP9CC in the US

Make sure to watch my Table Top Review for this pistol for if you have not already done so. In this Field Test Shooting portion of my review for the Umarex Magnum Research Baby Desert Eagle CO2 BB Pistol, I shoot 5 rounds through my Chronograph to find out if the claimed 410-420 fps is accurate or not. I also setup a paper target at my standard 30 foot range and shoot 10 rounds using a semi rested position (Standing in the back while resting the gun on a sand bag up front). I did not add any additional sight options to the rails on the Umarex Baby Desert Eagle but rather stuck with the open sights for this field test.

In terms of performance, the Umarex Magnum Research Baby Desert Eagle CO2 BB Pistol did pretty good for a really low cost BB gun with a rather long heavy unpredictable double action trigger. I was a bit surprised when I walked up to review the target to find just over a 2 inch group since while shooting it felt like I was pulling a many of the shots. The open sights are not adjustable in any way but I did shoot down the middle pretty well, but on the high side of the target. I would need to aim low to get this gun to shoot in the bulls-eye form 30 feet away. Either that or add some sort of sight to the top mounted picatinny rail.

My fps Chrony testing for the Umarex Baby Desert Eagle backed the claimed 410-420 fps claims from Umarex, I actually shot a 5 shot average of 417 fps so right on the money here and you may be able to expect even a bit more on a warm summer days since my test was done at moderate fall temperatures.

All in all a decent shooter, good fps, efficient on CO2 and for a heavy DOA trigger I was even able to get a respectable grouping.

Buy the Baby Desert Eagle in the Canada Store

Buy the Baby Desert Eagle in the US Store

Type: BB air pistol.

Manufacturer:Umarex.

Model:Magnum Research Baby Desert Eagle.

Materials: Mostly plastic with internal metal parts.

Weight: 1 pound.

Barrel: 4.25 inches, metal non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, non-blowback, double action only.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 15 rounds - Internal spring fed magazine.

FPS: 420.

Trigger Pull: The trigger on the Umarex Baby Desert Eagle is double action only, it is a very long trigger that has a medium to heavy pull weight with a very long take up and unpredictable release point. Shooting accurately and controlled will take some time in the saddle so to speak but can be achieved. This pistol is really for plinking at pop cans and such, shooting off hand for fun. My full Field Test Shooting Review to follow shortly...

Build Quality: The Magnum Research Baby Desert Eagle is pretty much all plastic with some internal metal parts. The only actual working external parts are the trigger and the cross bolt safety. The slide catch, hammer, slide mounted safety and take down lever are all moulded into the plastic of the gun and are none functional. Even the magazine is internal so no need for a magazine release here! In the case of the Baby Desert Eagle, perhaps less is more since there is very little to break off or go wrong with this simplistic BB shooter ;)

Realism: This is a very close replica in terms of looks only (not to scale) to the real actual Magnum Research Desert Eagle with licensed trademarks and all. Keep in mind this is the "Baby" version so it is significantly smaller and lighter than the Pellet shooting full size Magnum Research Desert Eagle which could actually be a benefit to those with smaller hands. But again if we are simply talking about "looking like" a Desert Eagle than the Umarex Baby Desert Eagle does look the part, well except for the strange looking slide trigger.

Purchased this form: The Replica Airguns Store.

Pros:

• Price is right at around $50.
• Will fit smaller hands much better than the full sized Desert Eagle.
• Has both a top and bottom picatinny rail for all your accessory mounting needs.
• Magnum Research Licensed.
• Not bad in terms of power, accuracy and CO2 usage combination.

Cons:

• Mostly all plastic.
• Very few actual working parts, only the trigger and cross bolt safety.
• Trigger is very long and kind of unpredictable.
• If you decide to mount the included top picatinny rail, you will not be able to use the pistols built in iron sights anymore.
• Unsightly screw holes on the left side of this air pistol.
• No drop out magazine of any type.

Comments:

OK, so I'm rarely thrilled with the lower budget plastic super simple BB pistols but they do have their place. The tend to work well and stay reliable since there are fewer parts and less mechanical gizmos to get messed up. When the shooting begins and the steel starts to fly, they point the same and they hit your target just the same and all for a lot less out of pocket fun. On the plus side the Umarex Baby Desert Eagle is a pretty decent looking Desert Eagle copy all be it a much smaller version so if you've always wanted the big boy version with it's super huge handle and rather steep price point, well now you can get it in a size and price reduced version that just may be all you really need...

Watch my YouTube Video Review for the Umarex Magnum Research Baby Desert Eagle:

Buy the Baby Desert Eagle in the Canada Store

Buy the Baby Desert Eagle in the US Store

Since I have already doen dedicated reviews for both the T.A.C Converter and XBG BB Pistol, I won't drag this written reviw on too long since yuo can read my other dedicated reviews for each product.

In a nutshell, when you buy the Umarex T.A.C. Converter XBG CO2 BB Pistol Combo, you get the XBG CO2 4.5mm BB Pistol preinstalled in the T.A.C Converter, you also get the included fore-grip which is renovable by the way can coudl be used stand alone on any other gun with an under barrel Picatinny rail.

Keep in mind that this combo kit only works with the XBG Pistol since there are no included adaptors for the other Umarex pistols designed to work with the T.A.C Converter. (H&K USP, S&W M&P40, XBG, CZ Enforcer, Walther P99 DAO, SA177).

The addition of the T.A.C. Converter to the XBG really improves the shoot-ability since the rear folding stock allows for a much more stable hold position. You also have the addition of whit dot sights front and back with the rear sight being adjustable for windage only. I would recommend a compact light weight red dot sight for this gun since using the included open sights are hard to keep in focus because of how close the rear sight ends up being to your eyes when in the shouldered position.

With the top, bottom, and side picatinny rails you can add litterally all types of accessories to this package including a tac light, laser, optical sight, red dot, folding metal sights to name a few.

The XBG BB Pistol has a nice combincation of 400+ fps with tuns of shots per CO2 and respectible accuary with easy access to the Drop out metal BB magazine.

For under $60 in our Canada Replica Airguns store this is a really fun package!

Buy the T.A.C. Converter XBG Combo in Canada

Buy the T.A.C. Converter XBG Combo in the US

Here is my follow up Shooting Field Test to my ASG STI Duty One Non-blowback Table Top Review. During this Field Test Shooting video review I not only shoot my Non-blowback STI Duty One version but I also compare it to the Blowback ASG STI Duty One to see if fps and accuracy are effected when adding Blowback to the equation? I shoot 5 rounds through my Chronograph with both guns to get an average fps and I also step back 30 feet and setup resting my hands on a sand bag and standing in the back for a fairly secure shooting stance. I did my standard 10 shot grouping for my accuracy test from 30 feet away.

Overall both guns performed similarly and as expected the Blowback did effect the fps but not as much as I expected it to? I was expecting the Non-blowback STI Duty One to be at least 50 fps faster but it was only around 20 or so. I am fairly certain since the fps os so close between the two guns, that you will get more shots form a CO2 out of the Non-blowback ASG STI Duty One since there is no CO2 being used to make the slide recoil back and forth. In the end the Non-blowback STI shot an average fps of 373 while the Blowback version shot an average fps of 356.

When it came to accuracy, both guns performed about the same getting about a 2 inch group from 30 feet back. The Blowback STI did spread the BB's out more from side to side perhaps because of the slide recoil while the Non-blowback ASG STI Duty One seemed to shoot Horizontally tighter.

Personally since both guns shoot almost as high of fps and both STI Duty One's seem to be about the same accuracy wise. Why not just go with the blowback version since you will be shooting in single action most of the time which allows for a faster and lighter trigger pull. The only real downside to the Blowback STI Duty One is perhaps a bit more CO2 usage but you can still expect to get around 100 shots per CO2 which is very good for a CO2 blowback pistol.

Buy the STI Duty One NBB In Canada

Buy the STI Duty One NBB In the US

Here is my follow up Shooting Field Test to my Umarex CP88 Competition Table Top Review. During this Field Test Shooting video review I not only shoot my CP88 Competition version but I also compare it to the non Competition CP88 version to see if fps and accuracy are effected when adding the longer barrel? I shoot 5 rounds through my Chronograph with both guns to get an average fps and I also step back 30 feet and setup resting my hands on a sand bag and standing in the back for a fairly secure shooting stance. Since the Umarex Walther CP88's have an 8 shot rotary magazine I went with an 8 shot grouping for my accuracy test from 30 feet.

Overall both guns performed similarly and as expected the longer barrel CP88 Competition had the higher fps with 424 average versus 347 average, but what was surprising was how much faster the CP88 Competiton shot. Right around 80 fps more which is significant considering there is only 2 inches more of added barrel length to the Umarex CP88 Competition version. I am thinking that perhaps my CP88 Competition test model was tuned a bit better at the factory?

When it came to accuracy, both guns performed about the same getting about 1 inch group from 30 feet back. This was not a surprise since barrel length has less effect on accuracy than most people think.

Both guns are a pleasure to shoot and will not only perform great shooting close up but if you go with the higher fps Umarex Walther CP88 Competition you will be able to shoot much further out because of the rifled barrel and decent fps performance.

Buy the CP88 Competition in the Canada Store

Buy the CP88 Competition in the US Store

Type: BB air pistol.

Manufacturer: ASG.

Model:ASG STI Duty One 1911 Non Blowback.

Materials: Metal slide and polymer frame.

Weight: 1.8 pounds.

Barrel: Metal non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto blowback, single action.

Ammunition Type: 4.5mm BB's.

Ammunition Capacity: 20 round magazine.

FPS: 407.

Trigger Pull: The trigger pull on the ASG STI Duty One 1911 Non Blowback is fairly light in both single and double action. Take-up is the same in both modes but when in single action mode most of the trigger pull has little to no resistance until you get to the break point near the end where the hammer is released.

Accuracy: In an Earlier review I shot the Blowback version STI Duty One 1911 air gun at a target from 20 feet away in a free standing position, and it performed well getting a 1.5 to 2 inch grouping right in the center of the target. The rear sight is adjustable for windage which is always nice to have just in case you are shooting a bit to the left or right. For me there was no need to adjust the sights. My Chrony testing with an eight shot averaged result was 373 fps - very decent for a blowback pistol! It will be interesting to see how this Non Blowback version performs since there is more CO2 going to the BB and less gun movement without the Blowback operation.

Build Quality: ASG did a great job designing and making the STI Duty One 1911 Non Blowback BB gun, they didn't really compromise on anything other than going with a polymer frame! With that said all that important parts like the Slide, Slide Catch, Safety, Mag Release, Hammer, Barrel and Magazine are all metal. The fit and finish as with all the ASG air guns is very good!

Realism: The ASG STI Duty One 1911 Non Blowback version is a close replica to the real steel STI 1911, the only real giveaway is the trigger design, as a true 1911 trigger is not your typical lever type. Even with the different type of trigger the STI Duty One is a very good replica complete with STI licensing and trademarks.

Purchased From: The Replica Airguns Store.

Pros:

• No Blowback action but does have a working slide and slide catch.

• Adjustable rear sight for windage.

• Shoots in both single and double action.

• Good quality control, very well made, fit and finish is good.

• Should have good power and accuracy like the blowback version, perhaps even a bit better.

• May have even better CO2 usage than the already good blowback version.

• Metal drop out magazine.

• Good STI Replica.

• Holds really well in the hand.

Cons:

• Trigger is not true to the real steel 1911.

• No working grip safety like a real 1911.

• Polymer frame rather than a metal frame.

• CO2 can be hard to get out.

Comments:

In terms of comparing the Non Blowback version of the ASG STI Duty One 1911 to the Blowback version without actually shooting it, they are pretty much identical except for the double and single action trigger found on the Non Blowback version. Even the slide seems to work the same. The big difference will be when I shoot the Non Blowback ASG STI Duty One. Will it shoot with a lot more FPS and will the reduced slide movement give it more accuracy? I am assuming yes to both of these question but I guess we will all have to wait and see when I do my official Shooting Field Test Comparison...

Watch my Vimeo Video Review for the ASG STI Duty One Non Blowback CO2 BB Pistol:

Buy the STI Duty One NBB In Canada

Buy the STI Duty One NBB In the US

This video is to give you a heads up on a few guns I will be reviewing shortly. Most of them are different version of guns I have already reviewed except for the Baby Desert Eagle which so far has eluded me :)

ASG STI Duty One CO2 4.5mm Steel BB Pistol (Non Blow Back)

• 4.5mm Steel BB

• 12 gram CO2

• 20 Round Drop Out Metal Magazine

• 407 FPS

• 1.8 Pounds

Buy ASG STI Duty One in Canada

Buy ASG STI Duty One in the US

Umarex CP88 Competition CO2 .177 Caliber Pellet Pistol

• .177 Caliber Lead Pellets

• 12 gram CO2

• 8 Round Metal Magazine

• 407 FPS

• 2.56 Pounds

Buy Umarex CP88 Competition CO2 in Canada

Buy Umarex CP88 Competition CO2 in the US

Umarex Baby Desert Eagle CO2 4.5mm Steel BB Pistol

• 4.5mm Steel BB

• 12 gram CO2

• 15 Round Drop Internal Magazine

• 410 FPS

• .9 Pounds

Buy Umarex Baby Desert Eagle in Canada

Buy Umarex Baby Desert Eagle in the US
 

Umarex TAC XBG CO2 4.5mm Steel BB Pistol

• 4.5mm Steel BB

• 12 gram CO2

• 19 Round Drop Out Metal Magazine

• 410 FPS

• 1.85 Pounds

Buy Umarex Tactical Adjustable in the Canada

Buy Umarex Tactical Adjustable in the US

This Article and Video expresses my views and opinions on this matter and should not be taken as legal advice.

Main points covered:

• Uncontrolled Firearms do not require a Firearms License within Canada to own and operate.

• What is an Uncontrolled Airgun and Airsoft Gun?

• What is an Uncontrolled Blank Gun / Starter Pistols?

• What about Fully Automatic Airguns and Airsoft Guns?

• What about Replica Guns?

NOTE: Controlled Firearms require a POL (Possession Only License) , PAL (Possession Acquisition License) or R-PAL (Restricted Possession Acquisition License) within Canada to own and operate. 

MEMORANDUM D19-13-2

Firearm – a barreled weapon from which any shot, bullet, or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barreled weapon and anything that can be adapted for use as a firearm.

“Uncontrolled”firearms are those devices that, although falling within the definition of a firearm in the Criminal Code, are exempt from specific legal requirements of the Firearms Act and its regulations, as well as from other legislative provisions. “Uncontrolled” firearms should not be subdivided into any of the non-restricted, restricted, or prohibited classes. The following types of firearms are deemed “uncontrolled”:

Flare, blank, rivet and industrial guns: Any device that is designed exclusively for signaling, for notifying of distress, or for firing blank cartridges or for firing stud cartridges, explosive-driven rivets or other industrial projectiles, provided that the importer intends to use it only for the purpose for which it is designed.

NOTE: (Toy guns and starter pistols do not generally qualify as firearms. However, some toy or model guns and starter pistols may be designed with very realistic mechanisms or appearances (e.g., color, size, scale, translucency) and resembling a real make and model of a firearm. In such cases, they may be considered replica firearms even if they are made of plastic, die cast zinc, or other material.)

Low muzzle velocity/energy guns: Any barreled weapon that is not designed or adapted to discharge projectiles at a muzzle velocity exceeding 152.4 meters per second (500 feet per second) and at a muzzle energy exceeding 5.7 Joules, or to discharge projectiles that are designed or adapted to attain a velocity exceeding 152.4 meters per second (500 feet per second) and an energy exceeding 5.7 Joules. Both thresholds of 152.4 mps and 5.7 Joules must be exceeded for the firearm to be considered “controlled”. This requirement exempts firearms that fire below the threshold velocity with a standard projectile, but exceed the threshold velocity when fired with a high-velocity projectile. 

Airsoft guns and certain types of paintball guns or markers may qualify as a replica firearm, if the muzzle velocity of the projectile does not cause serious bodily harm and their external features are clearly designed to resemble a specific and readily identifiable make and model of a firearm. To be considered a firearm, within the meaning of the Criminal Code, an airsoft gun must have a muzzle velocity in excess of 111.6 meters per second (366 feet per second).

NOTE: This memorandum used to state when using a .20 gram BB but does not specify this BB weight anymore?

NOTE: The term air gun is a colloquial term referring to BB or pellet guns. Such guns operate either as spring- powered, gas-powered, or electrically powered. If the muzzle velocity of the air gun is less than 152.4 mps (500 fps)/5.7 joules but still able to cause serious bodily injury to a person, it may be considered an “uncontrolled” firearm. Airsoft guns and certain types of paintball guns may qualify as a replica firearm (see paragraph 49 of this memorandum).

Replica firearms:

“Replica firearm” is defined as any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm.

For a device to be a replica firearm it must meet all three requirements:

• (a) it cannot be a firearm, meaning it does not discharge a projectile with sufficient energy to cause serious bodily injury or death to a person. If the device is a firearm, then it cannot be a replica firearm (and vice versa);

• (b) it must resemble exactly, or with near precision, a real existing firearm of an identifiable make and model. With respect to visual examination, note that the maximum observing distance is one at which the equivalent make and model of the firearm can be identified. This distance will vary from one firearm make to the next. For example: A Luger pistol has a very distinctive silhouette as compared to other makes and is therefore more readily identified from further away. The examination of the object is something more than casual, but less than detailed. The device does not need to be so close that markings are identifiable; and

• (c) it cannot be designed or intended to exactly resemble, or to resemble with near precision, an antique firearm. 

RCMP Website "Air Guns"

1. Air guns that are "Controlled" Firearms for purposes of both the Firearms Act and the Criminal Code

These are air guns with both a high muzzle velocity (greater than 152.4 meters or 500 feet per second) and a high muzzle energy (greater than 5.7 joules or 4.2 foot-pounds). The "muzzle velocity" is the speed of a projectile at the instant it leaves the muzzle of a gun, normally expressed in meters per second or feet per second. The "muzzle energy" is the energy of a projectile at the instant it leaves the muzzle of a gun, expressed in joules or foot-pounds. Air guns need to meet both standards to be classified as "Controlled" firearms for purposes of the Firearms Act.

These high-powered air guns are subject to the same license and registration requirements as a conventional "Controlled" firearm. Owners and users are also required to store, transport, display and handle them safely in accordance with the regulations supporting the Firearms Act.

Usually, the manufacturer's specifications are used to determine what muzzle velocity and muzzle energy an air gun was designed to have. This information may be available in the user's manual or on the manufacturer's website. If the information is not available, individuals can call the Royal Canadian Mounted Police Canadian Firearms Program (CFP) at 1-800-731-4000 and ask to speak to a firearm technician to find out if the air gun is considered to be a firearm for purposes of the Firearms Act.

High-powered air rifles are generally classified as non-restricted firearms. However, the classification depends on the exact design of the air gun. Air rifles manufactured to resemble an assault rifle could be non-restricted, restricted or prohibited depending on the exact model imitated. High-powered air rifles would also be prohibited firearms if fully automatic or if they have a sawed-off barrel. They could also be restricted firearms if they have a folding stock that reduces the overall length to less than 660mm. 

Additional thought on this subject: Even though Uncontrolled Firearms are not governed by the same laws that apply to Controlled Firearms within the Firearms act and do not need to be handled or stored similar in the same way you are required to handle, transport and store a Controlled Firearm, we need to treat our Uncontrolled Airguns, Airsoft Guns and Blank guns with care and go over and above what is expected when had handle, transport and store them.

This one is a bit of a revisit since I already did Full Auto Fun Videos for both my Cybergun GSG 92 and Cybergun Mini UZI, both of which I had to do the conversion mods (GSG 92 Full auto Mod Video - Mini UZI  Full Auto Mod Video) to allow them to shoot in full auto modes.

The good news is that out of the box the KWC Mini UZI and KWC M92 both shoot in selectable semi auto and full auto modes. And if you didn't already know, the KWC versions are virtually the same guns since KWC makes them for Cybergun. The only real difference being the KWC version does not have the licensing or white lettering on the BB guns and of course the KWC versions are full auto ready to go.

So with that said, enjoy my YouTube Full Auto Fun Video of the KWC Mini UZI and KWC M92 Full Auto ready 4.5mm Steel BB CO2 Blowback Replicas.

Buy the KWC M92 Full Auto Ready BB Pistol

Buy KWC Full Auto Ready BB Mini UZI

Alright, so todays Full Auto Fun Video may be stretching things just a bit but I figured that since my Umarex Walther SG 9000 does have the ability to shoot 3 rounds with each pull of the trigger that we'll give it the benefit of the doubt and include it in this round of Full Auto Fun Videos.

The Walther SG 9000 is a kind of different looking airgun, the back half looks like a Walther Pistol while the front half is more of a tactical styled shotgun. And like a shotgun you can shoot multiple BB's with one shot. You actually have teh option of shooting single shot or three shot burst. In single shot mode, the Walther SG 9000 is pretty peppy shooting at around 500 fps on a fresh and warm 88 gram CO2. When you switch the SG 9000 over to three shot burst mode, it does slowdown somewhat closer to the 250 fps range so not really that great for any serious penetration.

But I figured since I was shooting clay pigeons which are made for shotgun use, why not use a BB styled multi-round shotgun on some of them! All in all the Umarex Walther SG 9000 got the job done...

I am sad to say that Umarex does not seem to make the Walther SG 9000 anymore so if you're looking for one you may have to settle for a used on if you can find an owner willing to give it up.

Buy BB Rifles in Canada 

Buy BB Rifles in the US

Hey everyone, we just got a really large Umarex order in our Canada location so if you have been waiting on some product from Umarex we should have most items in stock now...

Some of the more popular Umarex items these days are:

• Umarex Steel Force 6 Round Burst CO2 BB Rifle
• Umarex Steel Storm 6 Round Burst CO2 BB Gun
• Umarex H&K MP5K-PDW CO2 BB Rifle
• Beretta PX4 Storm CO2 Blowback Pellet / BB Pistol
• Desert Eagle Black Magnum Research CO2 Blowback Pellet Pistol
• Umarex Browning Buck Mark URX .177 Break Barrel Pellet Pistol
• Beretta FS M84 Blowback CO2 BB Pistol
• Colt Python 6 Inch CO2 Steel BB Revolver
• Colt Commander 1911 Blowback CO2 BB Pistol
• Umarex Legends Luger P08 CO2 BB Pistol
• Walther PPS CO2 Blowback BB Pistol
• Umarex Legends C96 Blowback CO2 BB Pistol
• Legends Makarov Ultra Blowback CO2 BB Pistol
• Umarex HPP Blowback CO2 BB Pistol
• Umarex Walther P38 Blowback CO2 BB Pistol
• Walther CP99 Compact Black Blowback CO2 BB Pistol
• Walther PPK CO2 BB Blowback Pistol 

Today's Full Auto Fun Video features the Umarex Steel Storm CO2 (Internal) Blowback Semi Auto and 6 Round Burst BB Gun. In my books any gun that can shoot at least 3-6 rounds for every pull of the trigger is full auto in my opinion. I tend to shoot in short bursts even if the gun is truly full auto since holding the trigger down till the mag is empty just means you have a lot of down time reloading on your hands. I prefer short controlled bursts because they are more accurate and you can make corrections if need be. You also use less CO2 giving the gun and CO2 a chance to warm up a bit between bursts.

The Umarex Steel Storm has been in my collection of a while now and was the first out of the box full auto BB gun I reviewed on my YouTube Channel. Version 2 of the Steel Storm is the Steel Force which shares many mechanical attributes to the Steel Storm but the Steel Force (externally) is modeled after the AR platform and has the addition of a multi-position AR styled stock which does help with target hold and accuracy.

I will be shooting the Steel Force in an upcoming Full Auto Fun Video so stay posted for that one!

Buy the Steel Storm in Canada 

Buy the Steel Storm in the US

Yes! More Full Auto Fun Videos on the way and to kick of this week I shoot my ZMZ Tyrex PPA-K-01 Full Auto BB Gun. If you're not aware of the background on this very hard to get ahold of Airgun, I bought it new from another collector and imported it into Canada. I Paid an arm and a leg for it because the Tyrex PPA-K-01 is really hard to find here in Canada and the US, new or used.

The ZMZ Tyrex PPA-K-01 is a super close copy of the Kedr PP-91 (9 x 18 mm Makarov), also made in the same Russian ZMZ factory. So like my Baikal Makarov, the BB version and real steel version are made side by side and both guns use weapons grade steel and some parts from the real guns. Nothing of course that could be converted to a real gun.

As with my other Full Auto Fun Videos, I shoot up a bunch of clay pigeons and record all the fun using several cameras from several angles and points of view. The ZMZ Tyrex PPA-K-01 Blowback CO2 Full Auto BB Gun has a very high rate of fire and sounds like a real machine gun but much quieter of course. It is also surprisingly accurate as you will see in this Full Auto Fun Video!

Buy Full Auto BB Guns in Canada

Buy Full Auto BB Guns in the US