View fullsize

In this Field test Shooting Video I Test out the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle in the Replica Airguns Indoor Airgun Shooting Range to find out what kind of velocity we can achieve using standard .20 gram Plastic Airsoft BB’s. I also shoot 10 rounds in semi auto at my paper target 30 feet down range to see what kind of grouping I can get and then switch it over to full auto and let her rip till I am basically out of ammo and see if I can punch a nice hole in my cardboard backed target. If you are looking for more details and specification along with some closer up video then make sure to watch my Table Top Review Video for the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle.

Starting with my velocity test, I shot 5 rounds through my Chronograph using .20 gram Plastic Airsoft BB’s with the preinstalled spring and got an average of 402 fps with my lowest velocity being 400 and my highest velocity being 405 so really close in fps. You can tone down the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle a bit b y installing the M90 Spring if you find the fps to be a bit high for close quarter battles.

View fullsize

For the accuracy portion of this Field Test Shooting Review I proceeded to fire 10 semi auto rounds into a paper target setup 30 feet away. I use a semi rested shooting position with the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle resting on a sand bag up front and me sitting on a stool for stability. My 10 shot grouping was all within around 1 to 1.5 inches which is very good for an Airsoft Rifle shooting lighter Plastic BB’s. I then switched the selector into “fun mode” (Full Auto) and proceeded to hold the trigger down until I ran out of spring tension on the High Cap Magazine. I would say I got through around 100+ rounds with most of them making about a 2 inch hole in my target consisting of cardboard and of course the paper target in front of it.

I have reviewed the Specula Arms line of Airsoft Rifles in the past, both the Core and the Edge and they really are great Airsoft Guns. The Specna Arms Core SA-C07-PDW AEG Airsoft Rifle as expected lived up to my expectations and performed really great in this Field Test Shooting Video. If you like this model also make sure to checkout the other models Specna Arms Offers over in our Replica Airguns Canada and US Online Stores.

• Buy the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle in Canada

• Buy the Specna Arms Airsoft Rifles in the US

View fullsize

Type: Pellet Pistol.
Distributer: Umarex.
Model: Stainless Ruger Mark IV.
Materials: Metal and polymer build.
Weight: 1.56 pounds (708 grams).
Barrel: 5.3 inches (135mm).
Total Length: 11 inches (279mm).
Propulsion: Spring Piston.
Action: SAO Break Barrel.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 1 round.
FPS: 320.

View fullsize

Trigger Pull: The trigger pull on the Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.

View fullsize

Accuracy: I have tested out the all black version of this pistol which will perform exactly the same or should I say is expected to perform the same since they are virtually the exact same Pellet Pistol but in different finishes. You can watch my Field Test Shooting Video for the all black version but in case you don’t make it there I will fill you in on the basic results… In terms of velocity I averaged 312 fps using 7 grain lead pellets and got around a 2 inch 7 rounds grouping but expect with a bit more trigger time to get closer to 1 inch.

View fullsize

Build Quality: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?

View fullsize

Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.

View fullsize

Pros:

• It's a decent Ruger Mark IV Replica!

• Feels well built overall.

• Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.

• Barrel locks into place much better than the Umarex Browning Buck Mark URX did.

• Fully adjustable rear sight with fiber optic front sight.

• Auto locking safety, just don’t forget to unlock before each shot

• Actual metal trigger in this version.

• Nice and compact, not too heavy.

• Full Ruger licensed via Umarex.

• Fairly low price tag.

View fullsize

Cons:

• No built in rail for a sight system like the Umarex Browning Buck Mark URX.

• Would have liked a metal trigger and maybe a slightly lighter trigger pull to match the real Buck Mark's very light trigger pull.

• A bit more metal would have been nice.

• Significantly more expensive than the black version which is the same exact gun in a different color.

View fullsize

Comments:
The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a decent looking replica and a decent pellet shooting target pistol and if you own the real steel version in 22LR you may just want to get your hands on one of these Break Barrel Replica Pellet shooters. The only real question is do you get the Stainless version with simulated wood grips or the all black version? If you like the look of the stainless version and don’t care about money whatsoever, then pickup that one up since it is a Limited Edition version that will only go up in value over time. If you are on a budget and don’t mind the look of the all black versions or maybe even prefer it then by all means grab one since at the end of the day they will both perform exactly the same.

My Vimeo Table Top Review Videos for the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol:

• Buy the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol in Canada

• Buy the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol in the US

View fullsize

Type: Airsoft pistol.
Distributer: Umarex.
Model: Smith & Wesson M&P 9L.
Materials: Metal and polymer build.
Weight: 1.7 pounds (757 grams).
Barrel: 4.75 inches (121mm), non-rifled.
Total Length: 8.5 inches (215mm).
Propulsion: CO2 x1.
Action: Semi auto blowback, single action only
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 15 rounds.
FPS: 410 Claimed.

View fullsize

Trigger Pull: The trigger pull on the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is fairly light weight being a single action only trigger. There is about a quarter inch of take up with an easy release that is not hitchy at all. You will need to rack the slide to load your first Airsoft BB into the breach and engage the action but on the first shot but then the blowback action does this for you until the Airsoft Pistol is out of ammo and the slide locks back.

View fullsize

Accuracy: I have not performed my Field Test Shooting Video for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol so stay posted for that video coming out in the next couple of weeks. Umarex has claimed a velocity of around 410 FPS using .20 gram Airsoft BB’s but that does seem a bit quick, well will have to see when I place some shots though my Chronograph! In terms of accuracy I expect it to shoot about the same as most Full Blowback Airsoft Pistols which generally produces a 1.5 to 2 inch 10 shot grouping from 30 feet out using a semi rested shooting position. Again we will find out when I perform my Field Test Shooting Video for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol.

View fullsize

Build Quality: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol build quality is fairly decent, fit and finish looks good with not too much slide wiggle and the materials used are both metal and plastic or polymer that look to be good quality. I do expect some of the black finishes ot come off on the high spots as these guns are generally electroplated and not too thick with it but this can actually make the gun look more realistic with that slightly worn in look to it.

View fullsize

Realism: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol in terms of looking like the real steel version of its counterpart is very close for sure, it would be hard to tell without really taking a close look t it. Everything about this Replica Pistol works for the most part like the real steel version including most of the mechanical parts like the slide catch release, magazine release, take down lever, trigger safety and you can even fully field strip it which gives you easy access to the hopup on the barrel. Of course the full blowback action really seals the deal in terms of making this gun shoot like a real semi auto pistol.

View fullsize

Pros:

• Very accurate replica of the S&W M&P 9L.

• Fairly accurate weight and feel to it.

• Metal and plastic parts where you find them on the real steel version, fit and finish is good.

• Working trigger safety and ambidextrous working slide catch release.

• Full size dropout metal magazine that holds Airsoft BB's and CO2.

• Warning instructions are discreet under the trigger guard.

• Recessed barrel and hidden CO2 screw for more realistic look

• Fully Smith & Wesson licensed via Umarex.

• Rail for add on accessories.

• White dot sights for easy target acquisition.

• Comes with three sizes of interchangeable grips S/M/L.

• Adjustable hopup so you can at least adjust elevation at range.

• Comes in a box rather than a clamshell.

View fullsize

Cons:

• Has an orange tip but could be painted black or silver to match.

• Sight are not adjustable.

• 15 round magazine has less capacity than some other blowback Airsoft Pistols.

View fullsize

Comments:
The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is a nice addition to the Smith & Wesson M&P line of Replica Airguns. I’m glad they made it in full blowback but being Airsoft based that is generally the way they lean towards. Hopefully we get to see 4.5mm Steel BB version too in the future! For now we have it in Airsoft and with the longer barrel perhaps it will shoot a bit hotter than most of the other CO2 Blowback Airsoft Pistols, maybe even 410fps like Umarex claims but I will be surprised if it does. I will be happy to see something in the high 300’s to be honest. No matter what, you now have yet another Smith & Wesson option to consider when looking for your ultimate Replica Airgun!

My Vimeo Videos for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol

• Buy the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol in Canada

• Buy Airsoft Pistols in the US

This time I have a tiny Mystery Box to unpack and show you guys, this time there are only two pistols, one is a Spring Piston Single Shot .177 Caliber Pellet Pistol and the other is a 6mm Airsoft Blowback BB Pistol, both are Licensed Replicas for Umarex. If you want to find out more about each Air Pistol then make sure to watch this Mystery Box Unboxing Preview Video!

This will be my only video this week as I am in what is called Peak Week in preparation for the Vancouver Fall Calssic Fitness show I am competing in this upcoming weekend. Peak Week really takes a lot out of me and is rather time consuming with the physical activity I am doing and daily blog styled videos I am posting for my other channel www.GetFitOver40.com.

If you are interested in what I do fitness wise then checkout that channel and follow me along this week as I hope to kick some but competing against dudes half my age.

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

Type: AEG Airsoft Rifles
Manufacturer: Specna Arms.
Model: Core SA-C07-PDW
Materials: Fiberglass reenforced plastic and metal/aluminum.
Weight: 5.27 pounds ( 2.39 kg).
Total Length: 27.2 - 30.3 inches (690 - 770mm).
Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled.
Propulsion: AEG.
Action: Single action semi & full auto.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: High cap 380 round magazines.
FPS: 380 fps with installed spring, included M90 spring will be lower fps.

View fullsize

Trigger Pull: The trigger pull on the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle is similar to a light single action trigger as they are essentially an electrical on off switch. There is a little bit of take up with virtually no extra friction to let you know when the release is going to be, with a bit of use you will figure out exactly when the trigger will release the action.

Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle, but plan to very soon. You can checkout a previous video where I test out both Specna Arms RRA SA-C10 Core and E10 Edge which should perform similarly to the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle

View fullsize

Build Quality: One thing I can say is no matter which version of the Specna Arms AEG Air Rifles you deicide to go with (either a Core or Edge Series), you are getting extremely good value for your money and neither one is going to have any low quality parts in it. Even the lower cost Core Series will have fiber glass reenforced plastic and metal parts along with a metal gearbox and virtually almost the same build as the more premium and slightly higher priced Edge Series. You will get upgrades in the Edge Series such as a an aluminum receiver and buffer tube, a GATE X-ASR Mosfet, the New Orion Gearbox, deep laser engraved licensing and an additional magazine. All of this for the little bit more you pay for an Edge series Specna Arms AEG Airsoft rifle.

Realism: The Specna Arms Core SA-C07-PDW AEG Airsoft Rifle is based on the AR15 or M16 platform of course in a very modern and PDW styled look. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of your Specna Arms Rifle.

View fullsize

Pros:

• Super affordable yet very high quality product for what you pay.

• Quality components throughout both the Core and Edge series.

• Rock River Arms Licensed with hologram on receiver.

• ESA™ quick spring change system makes spring changes quick and easy.

• Comes with two springs for potential indoor and outdoor usage.

• Plastic parts are fiberglass reenforced making them very durable.

• Quick release fully adjustable pop-up sights.

• No orange tips on our Canada Store versions.

• Lots of rial mounting options even on such a short PDW styled AR.

• Metal V2 Gearboxes with metal gears and mostly all metal parts inside.

• Easy access to motor for any possible trouble shooting you any need to do

View fullsize

Cons:

• Plastic receiver.

• Need to hold back charging handle to access hop-up.

• You will need a very compact battery setup with most Specna Arms models.

View fullsize

Comments:

Value for your money is what comes to mind when I think about the entire Specna Ams AEG Airsoft Riffle product line, especially with the Core series. The Specna Arms Core SA-C07-PDW AEG Airsoft Rifle is probably one of my more favorite versions as I really like PDW style compact AR’s in general. You will have to make sure you have on hand a very compact battery as space is extremely limited but other than that one main downside to this style of AEG everything else about it for the money is bang on and worth any slight compromises.

My Vimeo Table Top Review for the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle:

• Buy the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle in Canada

• Buy Specna Arms AEG Airsoft Rifles in the US

View fullsize

Type: Paintball Shotgun.
Manufacturer: Umarex - T4E.
Model: HDX .68 Paintball Shotgun.
Materials: Metal & Polymer.
Weight: 6.8 pounds (3.100 kg).
Barrel: 16.2 inches (411.5mm) Metal smooth bore.
Power Source: 2x12 gram CO2.
Action: Pump Action with Internal Magazine.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 16 Rounds.
FPS: 250-360?

View fullsize

Trigger Pull: The trigger pull on Umarex T4E HDX .68 Paintball Shotgun is a single action only trigger that requires the Pump Action to engage the trigger. Without working the pump the trigger is in the rear portion and does not operate until the Shotgun is pumped, then it pops forward and becomes active. At that point I would say it is fairy short and light, maybe with a little bit of friction but not bad overall. There is also a cross-bolt safety right behind the trigger making it easy to engage and disengage the safety.

Accuracy: So far I have not had the opportunity to test the Umarex T4E HDX .68 Paintball Shotgun but plan a full Field Test Shooting Video shortly. As with most Paintball Airguns they are not going to be super accurate even at 30 feet away. Generally speaking most tests I have done with Paintball guns using rubber balls perform about the same with most of the rubber balls hitting my paper sheet target (8x11) but some even missing completely. In terms of power, on the box Umarex claims 250 fps but I have seen higher velocity specifications on websites including our own so I guess we will find out for sure when I perform my Field Test Shooting Video for the Umarex T4E HDX .68 Paintball Shotgun,

View fullsize

Build Quality: The build quality of the Umarex T4E HDX .68 Paintball Shotgun is very good since this Paintball Shotgun is made for military and law enforcement training use. It has a very good weight and feel to it and has metal parts where you would expect them including the receiver. If you picked this item up along with a real steel Shotgun it would be hard to tell or feel the difference at first inspection.

Realism: The Umarex T4E HDX .68 Paintball Shotgun as far as I know is not an exact replica of any specific Shotgun but it does look like what you would expect to see from a Tactical Styled Pump Action Shotgun. In terms of mechanical working parts everything does what it supposed to do and works as expected.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Pros:

• Expected fairly high fps power of 350+ with .68 caliber paintballs/rubber balls, a bit too high for your average paintball field but perhaps powerful enough to discourage an extruder?

• Lots of mounting option for accessories like a tac light, laser or other sighting option with its upper and lower picatinny rail setup.

• Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.

• Simple to use Cross Bolt Safety.

• Nice high capacity 16 round internal magazine.

• Dual CO2 offers more shots per CO2 change.

• Build quality feels really good, very solid, with lots of weight to it.

• Very intimidating looking, just that alone may scare off an intruder.

View fullsize

Cons:

• Need a tool to load rounds.

• Will not get lots of shots per dual CO2, around 70 or so but not bad.

• A bit on the large and bulky side.

View fullsize

Comments:

I am not sure exactly what one would use this Paintball Rifle for but there are a few options. You could use it on the field but with everyone else using high capacity rapid fire Paintball Guns you might be “Out Gunned” to say the least unless of course everyone else was limited in some way to their ammo capacity and rate of fire. Again the Umarex T4E HDX .68 Paintball Shotgun could be used as a non lethal home defense option when combined with the right ammunition type like say some pepper balls? The look of this Shotgun is probably enough to make an intruder get the heck out but I would not count on it. No matter what you plan to use it for it is an awesome Paintball Airgun for sure but just be aware if is not going to be the cheapest option at around $450 Canadian.

• Buy the Umarex T4E HDX .68 Paintball Shotgun in Canada

• Buy the Umarex T4E HDX .68 Paintball Shotgun in the US

I have another Huge Mystery Box to open and share with everyone, this one was even larger and heavier than the last one! You are going to have to watch the video to get all the details on what is actually inside but I can say there are 4 AEG Airsoft Rifles from a new to us company called Arcturus in both AR and AK versions and 2 CO2 Non Blowback Replica Pellet Pistols from KWC.

I do have a some more videos to make from the last Mystery Box Preview being a Specna Arms AEG PDW AR Airsoft Rifle and a Paintball Pump Shotgun that I still need to make both Table Top and Field Test Shooting Video for.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

In this Field test Shooting Video I Test out the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in the Replica Airguns Indoor Airgun Shooting Range to find out what kind of velocity we can achieve using standard lead pellets. I also shoot 6 rods on a paper target setup 30 feet down range to see what kind of grouping I can get with this single shot spring piston Airgun. If you are looking for more details and specification along wit some closer up video then make sure to watch my Table Top Review Video for the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun.

Starting with my velocity test, I shot 3 rounds through my Chronograph using .177 caliber 7 grain lead pellets achieving 482, 489 and 466 fps with an average of 479 for the three shots. Not bad for a fairly compact Break Barrel Airgun. This is perhaps fast enough for small game like mice and small rats but you would need to get proficient on your shot accuracy to make sure you got a good head or lung shot to make it a more humane pest control.

View fullsize

For the accuracy portion of this Field test Shooting Review I proceeded to fire 6 rounds into a paper target setup 30 feet away. I use a semi rested shooting position with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun resting on a sand bag up front and me sitting on a stool for stability. My 6 shot grouping was all within around 1.5 inches but I feel like this Pellet gun can do better with me getting a bit more use ot it, still not bad out of the box and with my first round shooting it.

I really like the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun as not only a Replica but it also shoed itself ot be a decent target Airgun at the end of the day. I do have to say the trigger is a bit long but not heavy at all, it has a smooth pull with a soft release. Most pimple should be able towel with this just fine. SO if you are looking for a Replica but also want an Airgun that can shoot hard and with decent accuracy then look no further than the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun.

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in Canada

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in the US

View fullsize

In this Field Test Shooting Video Review I test out the brand new Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun in the Replica Airguns Indoor Airgun Range Sea Can to see what the actual velocity is along with accuracy. I first test fps using my Chronograph and I perform this test with and without the barrel extension to see how much the additional barrel length will increase velocity. I also shot the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun in both semi auto shooting 10 rounds into my paper target setup 30 feet down range and then I perform a full auto 25 round magazine dump to see if the grouping expands or not.

Staring with the velocity test I did use brand new CO2 for this and the temperature was around 20 degrees Celsius or 68 Fahrenheit so not too cold or warm. With the Barrel extension installed I managed to average 418 fps shooting 4 rounds. With the barrel extension removed as expected the velocity did drop a bit down to 373 fps shooting 4 rounds and averaged out.

View fullsize

For my Accuracy Test I placed the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun in semi auto for the first portion and fired 10 shots into the paper target setup 30 feet away, I was using a semi rested shooting position with a sand bag up front to rest the gun on and me sitting on a stool in the back. I did not sight the red dot in and found that out of the box the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun shot down and too the right a fair amount but at least I was able to get most of the shots on the paper target and on camera. The grouping was around 2.5 to 3 inches so not super great but not bad either.

I then flicked the main selector to Full Auto since this is what most people want to see. I also reloaded the magazine with 25 rounds from the onboard hopper and unloaded the full magazine in a second or two. I did aim a bit higher and to the left this time to get the shots closer to the bullseye and I was able to do so with most of the 25 shots all within about 2.5 to 3 inches so not really any difference shooting in semi or full auto at least in terms of accuracy.

As I mention before in my Tabel Top Review for the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun, it is a bit different looking and for me took a bit of getting use to but the good news is that it performs about the same as the other Crosman CO2 Full Auto Blowback BB Rifles in this similar lineup so if you like the look then don’t be afraid to pick one up over on our Canada or US replica Airgun Stores.

• Buy the Crosman ST-1 in Canada

• Buy the Crosman ST-1 AR in the US

View fullsize

Type: Pellet Rifle.
Manufacturer: Umarex
Model: HK MP7 .177.
Materials: Metal and Polymer.
Weight: 4.4 pounds (2kg).
Barrel: 11.7 inches (29.7cm).
Total Length: 31 inches (78.7cm).
Propulsion: Break Barrel Spring Piston.
Action: Single Action Single Shot.
Ammunition Type: .177 Caliber Pellets.
Ammunition Capacity: 1.
Max FPS: 490 Claimed.

View fullsize

Trigger Pull: The trigger on the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. The actual trigger pull is pretty decent overall. There is very little take-up but the creep is on the longer side but fairly smooth requiring medium pressure. The release is a bit hard at first to predict but nothing some trigger time can’t get you use to.

View fullsize

Accuracy: I have not performed any shooting tests with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun so far. I hope to make that Video Review next week. I expect the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun to perform well in the accuracy department especially with the included Red Dot Optical Scope installed. I hope the velocity rating from Umarex is based on lead pellets and not hyper velocity light weight pellets but we will find out the story when I perform my Field Test Shooting Video shortly!

View fullsize

Build Quality: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is a China made Airgun but looks to be well made. It has lots of metal parts as you would expect from a Spring Piston Rifle which adds a nice weight and feel to it. I did however have an issue with the front plastic mock Suppressor/Compensator as it does not seem to be attached to the metal barrel very well other than being pressure fit which is not going to cut it with all the vibration a spring piston system makes. My first shot loosened the mock Suppressor/Compensator so I will either have to hold it when shooting or find another way to make sure it stays in place.

View fullsize

Realism: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is kind of unique in this department as most break barrel rifles are not Replicas, especially the more compact sub machine gun styled ones. Umarex did good job making the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun look like a real HK MP7 for the most part. Of course it is a Spring Piston Rifle at its core so exceptions had to be made to make this work including molded non working parts like the magazine release, sector switch and, bolt/ejection port. That said all in all it is a decent looking replica considering it is a Break Barrel Airgun under the skin.

View fullsize

Pros:

• Not many Replica Pellet Rifles on the market, especially in a more compact gun.

• Comes with Red Dot sight.

• Lots of rails for adding accessories to it.

• Full HK Licensed by Umarex.

• Collapsible Wire Stock.

• Nice high claimed 490 fps.

• No need for CO2 so low cost to cooperate.

• Not effected by temperature like a CO2 Airgun.

• Should have better accuracy than most BB Replica Airguns.

• Very solid feel to it, good overall weight and feel.

View fullsize

Cons:

• Not going to be an action shooter, have to reload after each shot.

• A good overall Replica but not as Realistic or full operation as a BB version would be.

• Mock Suppressor/Compensator poorly attached to barrel.

View fullsize

Comments:
The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is an interesting product, on one hadn't it is a Replica Airgun and most people expect a Replica Airgun to have all of the appropriate working parts similar to what would be found on the real steel version. But since this is a Break Barrel Airgun at the core the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun will not function the same as the Real Steel version so as long as you don’t expect it to and appreciate the fact that it should be a nice accurate low cost to operate target rifle then I think you will understand this product and enjoy it for what it is… A Single Shot Pellet Rifle that looks a lot like a HK MP7.

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in Canada

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in the US

View fullsize

Type: BB Rifle.
Manufacturer: Crosman.
Model: ST-1.
Materials: Metal & plastic.
Weight: 6.07 pounds (2.75 kilograms).
Total Length: 17.75/33 inches (Pistol/Rifle).
Barrel Length: 15.5 inches.
Propulsion: 12 gram CO2 dual cartridges.
Action: Blowback - single action only.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 25 Round/Spring - 300 Round/Hopper.
FPS: 480fps.
Rate of Fire: 1400 rounds per minute in full auto

View fullsize

Trigger Pull: The trigger pull on the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is single action only since the right side charging handle must be cocked first before you can shoot it to engage the action. The trigger is short and fairly light but not overly light. The real fun happens with the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in a mere matter of seconds at 1400 rounds per minute.

View fullsize

Accuracy: I have not actually shot this BB Rifle to date but expect it to get similar results to the other Crosman Full Auto BB Machine guns I have already reviewed. I am expecting a bit more velocity with the longer barrel extension installed and would be happy if I was able to get in the mid 400’s. Accuracy should also be about the same with 1 inch semi auto groups from 30 feet out expending a bit when in full auto.

View fullsize

Build Quality: The Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is well made all around. Weighing in at 6.07 pounds without any add on accessories other than the included compact Red Dot sight. It feels solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.

View fullsize

Realism: The Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is not modeled after any real steel gun I know of. It resembles a futuristic weapon you would see in a SciFi Action Movie or Alien First Person Shooter. I was not a fan of it when it was first released by Crosman but after seeing and holding it in person it is growing on me quickly.

View fullsize

Pros:

• Very unique, not like your regular Replica Rifles, very futuristic in design.

• Drop out magazine doubles as the 300 round hopper and holds CO2 and BB’s.

• Comes with Red Dot Sight and lots of rails for mounting what every you want on it.

• Can be either a Pistol or Rifle or a PDW by adding or removing the Barrel Extension and Rear Stock.

• Barrel Extension actual lengthens the barrel and should increase fps, not just for show!

• Tactile comfortable rubber padding in multiple locations.

• Semi auto and full Auto selectable.

• Expected higher fps of up to 480.

View fullsize

Cons:

• Some people may not like the look? Not like your normal modern rifle.

• Front rubber grip comes off really easy at least on mine?

• Will require barrel extension for full velocity.

View fullsize

Comments:

The Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is a brave move by Crosman, I was not expecting something like this from them and when I originally saw it I was not sure if it was a good idea or not but again once seeing it in person and actually holing it I feel a lot better about it. It will for sure appeal to those looking for a futuristic Airgun or wanting something that looks like a gun from a video game or SciFi movie. I also like the versatility you have with the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun being able to configure it how you like either as a Pistol, full on Rifle or PDW style shooter.

My Table Top Video of the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun:

• Buy the Crosman ST-1 in Canada

• Buy the Crosman ST-1 AR in the US

As the title suggest this a video about a Huge Mystery Box so I am not going to say what’s in it, I can say that their are 4 main products mostly rifles per-say. One is a Futuristic Full Auto BB Rifle, one is a Paintball Shotgun, One is an AEG Airsoft Rifle and one is a Replica Break Barrel Pellet Rifle.

So I have a lot of variety here to show everyone! I did absolutely zero research on any of the products I show in this video since like you I had no real idea what was inside other than how many and that most where rifle based.

Enjoy finding out what new products I will be reviewing over the next month with dedicated Table Top and Field Test Shooting videos.

I have been making a bunch of instructional videos lately mainly because i have not had a lot of new products to share with everyone, I am expecting 4 new Airguns that where supposed to arrive on Monday but Canada Post has for some reason delayed their arrival and so I am not sure when I will see them? Hopefully very soon!

As soon as they arrive I will make a Preview Video to show off all 4 products, sorry I can not tell you what they are as I don’t know, it’s a surprise for all of us which can be fun opening up a mystery box :) I will also be making dedicated Table Top and Field Test Shooting Videos for all 4 guns which should keep me busy for the next month or so…

On another note I am around 5 weeks out to my latest Fitness Show the Vancouver Fall Classic where I will be competing in Mens Physique and possibly Men’s Classic Physique. This event is taking place local to me in New Westminster BC Canada on November the 12th if anyone is local and wants to check it out!

I mention this because over the next 5 weeks I begin to do the most challenging part of my contest prep which requires a very strict low calorie diet along with a ton of activity (generally weight training 6 day per week with at least 5-6 miles of walking each day). This puts me in a good caloric deficit which enables me to lose around 2 pounds of fat per week which I am hoping will get me to around 5% body fat by show day this time around.

This is not a healthy body fat to be in for any length of time but is what I need to do to be competitive and show off the muscle on stage I have added during my contest prep. Less fat means more muscle detail which makes the muscle look bigger on stage.

This does all come at a cost of me feeling rather like garbage much of the time as my body is thinking I am starving and as expected will try and deter me from this course of action by making me extra hungry and very tired. Also keeping me awake much of the night so I can go out and find food LOL.

So if you notice me looking a little off this is why, I will do my best to still be entertaining and pleasant during my videos but I do get a bit irritated and I often lose my train of thought. You can checkout my Fitness stuff over on my fitness page www.GetFitOver40.com if this type of thing interests you.

Different Types of Airgun Sights

View fullsize

Sights for guns in general are the same for Airguns as is with real steel guns for the most part and can be mixed and matched with a couple of exceptions. Spring piston rifles for instance are an exception because of the unique vibration the spring makes and how it can damage a standard optical sight, so in this case you’re best to use an optical sight designed for a spring piston Airgun. In most other cases sights can be used on all types of guns.

In this Airgun Sights video I will go over the various types of sights that either come as part of the gun design or can be added afterwards using a rail or mounting system.

Types of Airgun Sights most commonly used.

View fullsize

Iron Sight (Fixed or removable).

Iron Sight (Adjustable).

Iron Sight (White Dot, Fiber Optic).

Come in Post/Notch, Post/Aperture (Peep).

Common on Pistols and Rifles

View fullsize

Laser Sight:

Generally added to a rail or can sometime be integrated into the design of the gun.

Common on both Pistols and Rifles.

View fullsize

Red Dot and Holographic:

Generally not magnified.

Most common on Rifles but can be used on Pistols.

View fullsize

Optical Magnified (Telescopic)

Come in a variety of magnifications for different shooting ranges.

Generally for Rifles but can be used on Pistols.

View fullsize

Gun Safeties generally are going to be similar for all types of guns, so Safeties used with Airguns are often the same types as used with Real Steel Guns. Some guns will have no Safeties at all while other guns many have multiple Safeties on them. In this informative video I go over six of the more common types of Gun Safeties used in Real Steel Guns and Air Guns.

View fullsize

Here is a list of the more common types of gun Safeties.

• Trigger Safety

• Cross Bolt Safety

• Slide Safety

• Frame Safety

• Grip Safety

• Magazine Safety

View fullsize

I sometimes mention in my review videos that a gun is either Full Blowback or Partial Blowback and some people may not understand exactly what this means and how it effects the Airguns Blowback Action and Performance so I figured it would be best to make a dedicated video talking about the differences and also some of the Pro’s and Con’s of each type of Blowback Action.

In the video I obviously go into a fair amount of detail and show you around each type of Airgun and Magazine as they do differ a fair amount but to summaries for you here in this written form, the main difference is going to be how much the slide moves back and forth. With Full Blowback Airguns the slide will move much longer back and forth on the frame of the Airgun much like a real gun does and the slide Catch/Lock generally locks back further too. With a Partial Blowback Airgun the slide generally has a shorter range of movement back and forth on the frame with the slide locks usually about half of the distance compared to a Full Blowback Airgun.

View fullsize

The magazines are also very different as a Full Blowbacks Airgun generally has a partially exposed BB which is pushed into the barrel by the nozzle with each slide cycle. With a Partial Blowback Airgun the BB is generally not exposed and either the trigger action or simply the CO2 force is required to transfer the BB in the breach of the Airgun.

Another point to mention is that Full Blowback Airguns tend to use more CO2 and have a slightly lower velocity as compared to Partial Blowback Airguns but this is not a rule.

There are many types of magazines used in Airguns and some of this is dependent on the ammunition used.

For instance a stacked type of magazine often used for Steel BB and Airsoft can not be used for Pellets as pellets tend to deform when stacked in such a way since there is no metal casting protecting them from mashing into each other.

So what type of magazines do we generally see in Airguns? The most common Airgun magazines are as follows:

Simple Stick Magazine

• Mostly used with Steel BB but also found in some Airsoft Airguns.

• Some Pellet Airguns use a type of stick magazine with a rotary magazine on each end.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel or a combination of both materials.

Full Size Drop Out Magazine

• Used with Steel BB and Airsoft guns.

• Generally you will find these types magazines hold both the BB’s and CO2.

• Used in non-blowback and blowback Airguns.

• Commonly used with Airsoft Rifles in mid to high capacity.

• Can be made from plastic or steel or a combination of both materials.

Rotary magazine

• Used with Steel BB, Airsoft and Pellet Airguns.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel.

• Can often use mixed ammo types as in both 4.5mm Steel BB and .177 caliber pellet.

Belt Fed Magazine

• Like rotary magazine belt fed magazine can accommodate Steel BB, Pellet and Airsoft but are most often used with Pellet Airguns.

• Usually found in a full size magazine that also holds the CO2.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel or a combination of both materials.

Internal Magazine

• Used with Steel BB, Airsoft.

• Can have a hopper built in hat feeds a spring fed magazine.

• Usually found in lesser expensive Airguns but not a rule.

In this Video I go through each type of Airgun Magazine and talk about their differences and uses.

I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.

I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.

And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.

In this video (Video Three) the Airguns being used are the Original Baikal Drozd CO2 BB Machine Gun and the Tokyo Marui CQBR Block1 AEG Airsoft Rifle.

• Buy Airguns in Canada

• Buy Airguns in the US

I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.

I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.

And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.

In this video (Video Two) the Airguns being used are the Crosman AK1 CO2 Blowback BB and the WE AK74 UN GBB AIrsoft.

• Buy Airguns in Canada

• Buy Airguns in the US

I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.

I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.

And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.

In this video (Video One) the Airguns being used are the Crosman R1 4.5mm CO2 Blowback RIfle and the Tokyo Marui CQBR Block1 6mm Gas Blowback Airsoft Rifle.

• Buy Airguns in Canada

• Buy Airguns in the US