• Make sure to also watch my Table Top Review for the Umarex Mauser C96

Today I bring to you my shooting field test for my second new Umarex Blowback 4.5mm CO2 BB Pistol and this one is part of the Legends Series, it's called the "Pistol C96" and is a variant of the Mauser C96, all though more so like the M1932 or M712 Schnellfeuer. The Umarex version is not licensed but none the less is a very good replica with lots of working parts including the blowback metal bolt, metal hammer, metal safety and adjustable metal rear sight. The single action only trigger is also metal along with the internal barrel and full size drop out metal magazine giving this otherwise all external plastic gun good overall weight of around 2 pounds.

Getting to the performance aspect of the Umarex C96 Mauser CO2 Blowback 4.5mm BB Pistol, I can say it is even more fun to shoot than admire it's beauty! I first put 5 rounds through my Chronograph hoping to get somewhere near the 380 fps claimed rating and actually exceeded it with an average of 390 fps even on this slightly cool day.

Lately I have been stepping back to my 30 foot mark even for pistol field tests and so I tested the Legends Mauser C96 with 10 rounds at 30 feet out using a semi rested position and got a very respectable 1.25 inch shot group. I did have to adjust the rear sight up a few notches to get it a centered on the target but it is very easy to do on the fly with this Replica Blowback BB pistol.

I am very impressed with the single action only trigger on the Umarex C96, it is nice and short and not too heavy with a predictable release, combine that with a very snappy fast blowback and you have yourself a very quick shooter on your hands! You can expect to get somewhere around 100 shots per CO2 and this gun is very backyard friendly as it is one of the quieter CO2 BB guns I have tested.

Yes there is a a lot of plastic on the outside but everything else is awesome about this pistol so don't let a few molecules turn you off of this little treasure...

Buy the Umarex C96 in the Canada - Buy the Umarex C96 in the US

• Watch my Table Top Review for the Beretta Mod. 84 FS CO2 Blowback  BB Pistol.

Finally, a field test video for you and I thought I would start off with the new Umarex Beretta Mod. 84 FS CO2 Blowback 4.5mm BB Pistol. This replica BB pistol is fully licensed and is a very decent operational replica to boot. It has a full size drop out metal magazine with blowback operation, a working slide catch/release and safety along with the ability to be easily field striped. Did I mention it's pretty much an all metal gun?

So this video is mainly about the performance and overall I was very happy with how the compact Umarex Beretta Mod. 84 FS shot for me. Even on this somewhat cool day, my average fps came in just a smidgen higher than the claimed 360 fps from Umarex. I was a bit surprised at the slightly heavy single action trigger but it didn't seem to effect the accuracy at all as I got about a 1.5 inch 10 shot group from 30 feet away using a semi rested position. You can even coax out around 100 shots per CO2 if you space your shooting out a bit and let the CO2 warm up between magazines.

All in all, if you like the Beretta 92 FS styled pistols but perhaps want a more compact version with good overall fps and accuracy along with licensing and quality build. Then for sure pick your self up an Umarex Beretta Mod. 84 FS CO2 Blowback 4.5mm BB Pistol.

Buy Umarex Mod. 84 FS in Canada - Buy Umarex Mod. 84 FS in the US

I finally got some brand new Umarex pistols to share with you in this Vimeo video, all three of these CO2 4.5mm Steel BB pistols have blowback and use full size drop out magazines. They also all share single action only operation.

The Umarex Makarov Ultra (Legends Series) is an all metal pistol with very heavy blowback and a long but fairly smooth and medium pull single action trigger. Everything works just like the real steel version including the slide catch/release and safety. It is also fully field strip-able.

The Beretta 84 FS (Cheetah) also has a decent blowback feel but the trigger was a bit heavier on this model, perhaps the trigger will break in a bit over time? Still a really great full metal and fully licensed CO2 Blowback BB shooter with awesome weight to it. The Beretta 84 FS is fully field strip-able and has a working slide catch/release and safety.

Lastly I show you the Umarex Mauser C96 Boomhandle (Legends Series), although much of the external materials are plastic, there is lots of metal throughout like the barrel, bolt, rear sight, hammer, safety, trigger and most of the drop out magazine, giving this pistol a good overall weight to it. The blowback is super fast and crisp with a nice short and light single action trigger making rapid fire very quick.

Umarex Makarov Ultra CO2 Blowback 4.5mm BB Pistol 

• Full metal

• Blowback operation

• 4.5mm Steel BB

• 12 Gram CO2

• Single action only trigger

• Fixed sights

• 3.5 inch smooth bore barrel

• 1.4 pounds

• 16-17 round magazine

• 350 fps

Umarex Beretta Mod. 84 FS CO2 Blowback 4.5mm BB Pistol

• Full metal

• Blowback operation

• 4.5mm Steel BB

• 12 Gram CO2

• Single action only trigger

• Fixed sights

• 3.6 inch smooth bore barrel

• 1.5 pounds

• 16-17 round magazine

• 360 fps

Umarex C96 Mauser CO2 Blowback 4.5mm BB Pistol

• Metal & plastic

• Blowback operation

• 4.5mm Steel BB

• 12 Gram CO2

• Single action only trigger

• Adjustable rear sight

• 5.5 inch smooth bore barrel

• 1.8 pounds

• 19 round magazine

• 380 fps

Buy Umarex BB pistols in Canada - Buy Umarex BB pistols in the US

In this Comparison Video I go through the benefits and shortcomings of Steel BB Versus Pellet Airgun ammunition, and what they are best suited to.

Here are some basic statements that best describe Steel 4.5mm BB and Pellet Airgun ammo.

Steel 4.5mm BB's:

• Steel BB's comes in 4.5mm

• Steel BB's use a hard steel and are often coated in either copper or zinc.

• Most BB Airguns usually do not have rifled barrels since the hard steel will not take advantage of the rifling  and only wear down the rifling.

• BB's are often loaded inline or one on top of each other with a spring follower that loads them into the breach of the gun. This can be done using a removable magazine or a built in loading bay.

Pellets:

• Pellets come in a variety of sizes, the most common sizes are .177 and .22 caliber (.177 is very close to 4.5mm).

• Pellets are most often made with lead but can be made with other light weight materials. (light weight high velocity pellets)

• Most Pellet Airguns have rifled barrels since the soft lead can grab onto the rifling and create spin.

• Pellets are either loaded one at a time or can be fed into a rotary magazine which then is placed into the Airgun. Pellets can not be stacked one on top of each other because they would deform and not load consistently.

Misc:

• Most Airguns shoot either BB's or Pellets, a few Airguns can shoot both types ammo but compromises are made. Barrel diameter may not be ideal for Lead Pellets and the rifling can get damaged if there is a high use of Steel BB's. Some dual purpose Airguns may not even have a rifled barrel.

• There are much fewer blowback Pellet Airguns since stick, or full size drop out magazines with followers work better mechanically with blowback operation.

Pros:

Steel 4.5mm BB's:

• BB's tend to be a bit lower cost than Pellets.

• Most BB Airguns have higher capacity magazines.

• BB's because of their hardness can have better penetration characteristics than Pellets.

• You may be able to reuse BB's if you have a proper backstop that can catch them safely.

Pellets:

• Pellets can be more accurate than BB's since they are generally shot out of rifled barrels, especially at longer ranges.

• Pellets are heavier and so will generally cary more energy and hit with more impact.

• Pellets are an overall better choice than BB's for hunting since they are more accurate and will carry more energy into their target.

• Pellets have the added benefit of mushrooming when they hit an object for even more stopping power. 

Cons:

Steel 4.5mm BB's:

• Copper BB's in my optioning can corrode over time and create a rust like looking dust which can get in your Airgun.

• Steel BB's will rebound off of hard objects much easier potentially hitting the shooter.

• BB's do not work well in rifled barrels and can wear down the barrels.

Pellets:

• Pellets are made out lead which is considered toxic.

• Pellets can deform pretty easy so care is required when handling.

• Pellets may not penetrate harder objects as well as hard Steel BB's.

In this Comparison Video I go through the benefits and shortcomings of CO2, Spring Piston and Pump Airguns. I focus mainly on Airguns but there is a bit of a crossover with Airsoft guns.

All three systems (CO2, Spring, Pump) create pressure that forces the ammunition with a high force out of the barrel. Similar to how gun powder is the source of energy for a bullet.

Here are some basic statements that best describe CO2, Spring Piston and Pump Airguns.

CO2 Airguns:

• CO2 Airguns use the expansion of CO2 gas to create the pressure required for the ammo.

• CO2 Airguns generally store enough CO2 for multiple shots per cartridge.

• CO2 Airguns have a limit as to how much power they can produce since CO2 has a set vapor pressure of 850 psi, or about 56 bar at room temperature which is around 25 C or 77 F. CO2 Gas also requires a warm environment to expand so warmer temperature and longer barrels help with power.

• Some CO2 guns can also use pressurized air tanks in place of CO2.

Spring Piston Airguns:

• Spring Airguns use the release of a pre-cocked spring and plunger system to compress air to power the ammo.

• Spring Piston Airguns require the cocking of the spring between each shot so they are single shot only.

• Spring Airguns are limited to how much effort is humanly possible to cock the spring into position. If you make the spring to strong then not everyone will be able to use the Airgun effectively. Too week of a spring and the Airgun will lack power.

• Spring Piston Airguns are known for having a fair amount of recoil and vibration when the spring moves both forward and backwards quickly inside the Airgun.

• Spring Airguns can use either a mechanical spring or a gas spring.

Pump Airguns:

• Pump Airguns (either Single or Multi-Pump) store air pressure in a chamber that when released, powers the ammo.

• Most Pump Airguns require at least 1 or more pumps, often up to 10 pumps for each shot and you generally only get one shot per set of pumps. Not to be confused with PCP Airguns (Pre Charged Pneumatic) which have large pressure tanks that are recharged with a high volume of pressurized air that is capable of shooting multiple shots per charge.

• Pump Airguns are also somewhat limited to how much effort is humanly possible since the higher the chamber pressure, the harder it will be to pump the Airgun. 

Misc Airguns:

• Generally speaking both Spring and Multi-Pump Airguns have more potential power than a CO2 guns since CO2 has a set peek pressure limit.

• Pump and CO2 Airguns are know to have very little recoil since the pressure is stored in a chamber and then released by a valve. No slapping back and forth of a large internal spring.

Pros:

CO2 Airguns:

• CO2 Airguns allow for multiple shots per CO2 cartridge for more realistic action shooting.

• CO2 Airguns do not require any human effort to charge the gun other than loading the CO2 and Ammo into the Airgun.

• CO2 Airguns allow for true semi auto shooting ability. 

Spring Piston Airguns:

• Spring Airguns have the potential for high velocity since the larger and stiffer the spring, the greater the output force.

• Spring Airguns do not require anything other than your ammunition, typically either a Pellet or BB.

• Spring Airguns are mechanically very simple which makes them very reliable and less expensive to produce than other types of Airguns. 

Pump Airguns:

• Pump Airguns have the potential for high velocity since more pumps equals greater output force, only limited by the users strength and the pressure rating of the Airgun.

• Pump Airguns do not require anything other than your ammunition, typically either a Pellet or BB.

• Pump Airguns have next to no recoil which makes them very easy to shoot and highly accurate.

Cons:

CO2 Airguns:

• CO2 Airguns require the purchase and use of CO2 or they simple do not work.

• CO2 Airguns are very susceptible to temperature changes, especially cold temperature since CO2 needs a warm environment in order to expand. Cool down effect also plays a role in power output.

• CO2 Airguns have a maximum set amount of power output.

Spring Piston Airguns:

• Spring Airguns require the pre-cocking of the spring for each shot.

• Spring Airguns can take some getting used to since the spring recoil/vibration requires a very lose grip (Military Grip) to shoot accurately with them.

• Spring Airguns should not be stored pre-cocked since this can damage the spring, less so with gas spring versions. 

Pump Airguns:

• Pump Airguns require pre-pumping to pressurize the air chamber for each shot.

• Pump Airguns, especially Multi-Pump Airguns take the most amount of human effort for each shot.

• Pump Airguns need to stored with at least one pump in them or the seals can get damaged over time.

In this Comparison video I go through the benefits and shortcomings of both Blowback and Non-Blowback Airguns. I focus mainly on Airguns but there is a definite crossover with Airsoft guns.

Here are some basic statements that best describe both Blowback and Non-Blowback Airguns.

Blowback Airguns:

• Blowback Airguns usually have a movable slide that moves back and forth with each shot.

• Sometimes the blowback operation is internal (Internal bolt) so there may not be an external moveable slide.

• Some CO2 is used to move the slide rearwards in a Blowback Airgun.

• The Blowback motion of the slide with some blowback airguns can also cock the hammer or internal striker allowing for true single action trigger pull. But not always!

• Some Blowback airguns have the potential for full auto capabilities since they can have a true semi auto action.

• There is some noticeable recoil from the Blowback action simulating the recoil of a real gun.

Non-Blowback Airguns:

• Non-Blowback Airguns can have fixed or movable slides but they will not cycle back and forth with each shot.

• Non-Blowback Airguns tend to have less working parts since no Blowback valves are required or even a moveable slide.

• There are some Blowback and Non-Blowback Airguns that field strip similarly to their real steel counterparts but this is most commonly found in Blowback Airguns.

• Non-Blowback Airguns require the shooter to cock the hammer for single action shooting or use a double action trigger pull for semi auto like performance.

Pros:

Blowback Airguns:

• Blowback Action causes a noticeable recoil which makes the airgun feel more realistic.

• Blowback Airguns in some cases have true semi auto action with true single action triggers which mimic the authenticity of the real steel versions of the guns they replicate much better making them better training tools.

• Having some recoil makes blowback Airguns potentially better training tools.

• Blowback Airguns look really cool when shooting them  and are great action prop guns.

Non-Blowback Airguns:

• Non-Blowback Airguns tend to have less working parts so less to go wrong and more reliability.

• Non-Blowback Airguns can be more accurate since the recoil from the blowback is not a factor.

• Non-Blowback Airguns have more potential power and more shots per CO2 since no CO2 is robbed for the blowback operation.

Cons:

Blowback Airguns:

• Blowback operation can rob some of the power and will also rob how many shots you get from the Airgun.

• Blowback Airguns are effected even more by cold weather and the cool down effect.

• The recoil from Blowback Airguns can effect accuracy for some shooters.

Non-Blowback Airguns:

• Non-Blowback airguns are generally double action when shooting semi auto and so the trigger pull will be longer and heavier.

• Non-Blowback Airguns do not replicate the recoil action of a real gun.

• Non-Blowback Airguns do not look as cool to shoot and are not as good of an action prop gun.

It seems like most Replica Airguns collectors are looking for their Replica Airguns to be made out of metal. I even get people complaining about the frames of their airguns being made out plastic (polymer), when in fact the real steel version the gun is designed to replicate also has a plastic or polymer frame.

Most modern real guns are made as light weight and compact as possible, utilizing high grade plastics (polymer) and light weight metals. Of course they use high grade hardened steel in areas where the gun receives the most pressure and continuous wear and tear.

In the real steel gun world, lighter is often better since carrying around a 3 pound pistol all day can be uncomfortable. On the other hand in the Replica Gun world it can be the other way around as replica airgun collectors want that heavy clanky gun that feels solid and real in the hand.

This begs the question - Do Airguns really need to be made out of metal? For strength reason generally not since high pressure is not a factor even in blank guns as there is no bullet holding the pressure in the barrel and when talking about an Airgun or Airsoft Gun, there is even less pressure on the internal parts. For this reason most companies use low grade metals that have a higher content of zinc, often called pot metal. Even though it looks and feels like gun steel it is not nearly as strong and will scratch and break much easier and not be able to handle high pressure. So even though you may think metal is a better option for an Airgun, the reality is that plastic can sometimes be a better option, at least in terms of durability.

What are the benefits to Plastic components:

• Lighter weight.

• More flexible, can take a bit of a beating without breaking.

• Does not show scratches or dents as much as metal. 

What are the benefited to Metal components:

• Gives the gun a more realistic weight, feel & sound.

• In some situations will wear better than plastic. 

What are the cons to Plastic components:

• Can be less realistic in weight, feel and sound.

• Can wear quicker than metal parts in some situations.

What are the cons to Metal components:

• Shows scratches and wear more.

• Lower quality metals can break or crack fairly easily. 

What do I prefer?

• I prefer realism so I like to have metal parts where they would be in the real version of the same gun.

• I like my Replica Guns to have a similar weight and feel as their real steel counterparts.

• I like higher quality metals to be used in the mechanical parts like: (pins, triggers, hammers, barrels, screws, springs, catches…)

• I don't mind the use of plastic when it is high quality plastic and again when used in a similar manor to the real steel version of the gun.

Watch my Vimeo video on What is Better - Plastic or Metal Replica Airguns?

Is an Airgun Good for Self Defense? Another one of those questions I get asked fairly often that's a bit hard to answer in a few sentences... Not all of us have easy access to a 9mm pistol or even a rifle but many of us can get our hands on an airgun fairly easily and they look real enough, I guess that is one thing they have going for them.

But what if the mere sight of what looks like a gun does not scare an intruder off? If you where hoping that would be enough, you may just be out of luck and what if you just brought an Airgun to a "real" gun fight? You are going to be drastically "outgunned" pun intended and here's why. A 4.5mm Steel BB weighs about 5.1 grains and generally you are looking at about 2-3 foot pounds of energy from a CO2 BB gun. Even a .177 caliber lead pellet is only marginally heavier at around 7-8 grains and if you're really lucky you might just get 4 foot pounds of energy out of a CO2 pellet pistol.

So let's take a look at a fairly conservative "real pistol" rounds, the 9mm. The 9mm rounds come in different bullet weighs but you can get a 120 grain 9mm in a plus p ammo with as much as 400 foot pounds of energy and even with that much raw power, many people claim that a 9mm round does not always have enough stopping power to put down a person even when shot multiple times center mass. It just depends what vital organs or arteries you hit that determines if he gets lucky or you get lucky.

Your 5.1 grain 4.5mm Steel BB is not going to do anything if it hits any type of clothing and even if you find some flesh it's just going to piss off the intruder.

My suggestion is to consider a bat or a golf club or a really big knife or just about anything other than an airgun because if the sight of the airgun replica does not scare an intrude away then you are really buggered.

Keep in mind that you need to abide by any laws regarding the use of self defense in your areas. Even just physical force could be considered a crime and at the end of the day you are ultimately accountable for your actions.

I finally answer the question... Which Airgun is the Best? There has to be a best airgun out there right? So let's cut to the chase and stop waisting everyones time and money buying the third Best Airgun or even the second best Airgun! Why would you even want anything other than the very best Airgun available to mankind!

I really hope you weren't one of the gullible ones that actually bought something other than the Best Airgun, well I guess you're going to have to watch my YouTube video to find out which Airgun is the Best Airgun of all time...

In many of my reviews I show the loading process of each gun but sometimes I either skim over this part or assume most people already know how to load an Air Pistol and skip it entirely. Well as it turns out not everybody does know how to load up an Airgun or they are unclear on certain areas, like do you actually need the CO2 and how long can you leave CO2 in an airgun?

So I made a video specifically to cover how to load CO2, BB's and/or Pellets into your Air Pistol.

Now even though this video is targeted at 4.5mm Steel BB and Lead Pellet Pistols, there is a crossover with 6mm Airsoft Pistols so this video may also help an Airsoft shooter.

Our Family Bearded Dragon (Dijon) was looking rather sad and lonely today so I figured he could hang out while I made the video, he really doesn't do much of anything most of the time so why not give him a special appearance in one of the Replica Airguns Videos ;)

I get asked about what cameras I use fairly often so a while back I made a video showing some of the cameras I used at that time. Since that video was made I have been using a newer pair of "HD Camera Glasses" called Pivothead Recons' which I really like and are very good quality and are perfect for that first person video camera angle.

In this video review, I show you around my pair of Pivothead Recon 1080p HD Camera Glasses and include some footage taken with them. I talk a bit about the specifications but have included the below specs right off of Pivothead's website to make sure it all gets covered:

OPTICS

4 ELEMENT GLASS LENS

Largan Glass Camera Lens

FOCUS

Recon'sContinuosFocus | Auto Focus: 4”- | Fixed focus: 2.8’ – | Macro 4”- 28”

FIELD OF VIEW

75 Degrees

IMAGE SENSOR

8MP Sony CMOS

RAM

2GB SDRAM

VIDEO

RESOLUTION

1080p@30fps | 720p@60fps | 720p@30fps

VIDEO FORMAT

Mp4 H.264

EXPOSURE

Auto | Bright | Dim

VIDEO OPTIONAL SETTING

Black & White | Face Tracking | Time/Date Stamp

AUDIO FORMAT

AAC MONO

44.1 kHz

PHOTO

IMAGE SIZE OPTIONS

8MP | 5MP | 3MP

BURST OPTIONS

16 Shot Stills | 10 Shot Stills | 5 Shot Stills | 3 Shot Stills

TIME LAPSE OPTION

1 Shot/1s | 1 Shot/30s | 4 Shots/8s

4 Shots/30s | 10 Shots/30s | 5 Shots/60s

FOCUS

Auto | Macro

EXPOSURE

Auto | Bright | Dim

ISO

Auto | 200 | 800 | 1600

PHOTO OPTIONAL SETTING

Black & White | Face Tracking | Time/Date Stamp

STORAGE

INTERNAL MEMORY

8GB

INTERFACE

USB CABLE

USB 2.0 Cable for Charging and Data Transfer

POWER

RECHARGEABLE

Rechargeable 3.7VLi-Polymer/440mAh

DC POWER

USB power via Micro USB, 5V DC 500mA

OPERATING SYSTEM

SYSTEM

Mac | PC | Android

PRE SET MODES

Active | Action Sport | Power Save

Spectator | Hands On (Macro) | Social | Black & White

CERTIFICATION

FCC | FDA | CE

Make sure to watch my Vimeo Video Review of the Pivothead Recon HD Video Glasses:

Two questions that come up over and over again and to be honest I just hate answering, mainly because both of these questions to me are kind of common sense questions. I feel if someone where to stop and actually think about teh question, the answers would become obvious.

That said, common sense has to be learned somewhere and not all of us are exposed to the same life experiences so here goes...

The two questions are:

• Will this Ammunition Work in my Gun?

• Can I Convert a Blank Gun to a Real Gun?

The answer for both of these question is actually the same! Use the ammo made for your gun and do not try to use anything other than the ammo that was made for your gun. Do not try to modify your gun to shoot anything other than the ammo that was made for it, if you do, you may be breaking the law and could land yourself in jail. If you can follow these rules then your ammo and gun will work as intended :)

So that's pretty much it in a nutshell, watch my YouTube video below as I show you examples of ammo types with visuals on exactly why you need to use the ammo made for your gun. I also talk about the dangers of attempting to modify a blank gun to shoot some sort of real bullet and why it is a very bad idea in so many ways to try and convert a blank gun into a real gun.

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the US Store

This video should go "Hand in Hand" (pun intended) with my Best Two Handed Pistol Grip Tutorial Video that I did last year back in August. After that video I had several people ask me to talk about how to aim a gun. I guess if you have been shooting guns for a while you kind of take it all for granted but after teaching my kids the proper way to aim a gun at a target, this info is not naturally born into us ;)

This video demonstrate how and where to place your open gun sights on a target and also how you can compensate for a gun that may not be perfectly sighted in.

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Carbine GBB.

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

I could pretty much copy and paste my review of my G&G CM16 Raider GBB since both of these guns are pretty much the same Airsoft Rifle with different finishings. Instead I will place a link to my G&G CM16 RaiderVersion 2 GBB AR Airsoft Rifle Review and insert some nice photos of the  G&G CM16 Carbine version for you to admire :)

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada - Buy G&G Airsoft Rifles in the US

I would think that most of you by now are aware of my other YouTube Channel, GetFitOver40, or perhaps not? Either way you are now :) I have been running GetFitOver40.com for almost as long as I have been running the ReplicaAirguns YouTube Channel and Website but I put GetFitOver40 on the back burner until about a year ago where I started investing some of my time back into it and as of right now the GetFitOver40 YouTube Channel has over one hundred videos, close to one millions videos views and over four thousand subscribers so it's doing pretty well.

If you haven't already guessed, GetFitOver40 is a fitness channel geared to those 40+ but I have lots of fitness related info for all ages including fitness gadget reviews!

My latest endeavor is a collaboration with the folks over at mrKnife.com, I like knives and they have an abundant supply of knifes for me to review so it seems like a good fit. Mr Knife is a Canada based online store supplying a variety of knife brands including, Cold Steel, SOG, Kershaw Canada and Ontario Knife Company. Here is the mrKnife new YouTube channel location.

So if any of these other YouTube Channels and Websites interest you then please show me your support and check them out and subscribe :)

This video in many ways goes over a Q&A I did back November 2013 but since we keep getting asked these question all the time, I thought I would address them again :)

1. How much is shipping in Canada? In a nut shell... $15 flat rate across Canada even to Ontario  and Quebec.

4. Will I have problems with Customs? No you will not since all the items we have listed in our Canada Replica Airguns store have already been imported into Canada and will be shipped from Canada to Canada, no boarders are crossed when we ship to you.

7. Are all guns legal in Canada? Yes, since they have all been legally imported into Canada already, they are legal to sell, buy and own in all parts of Canada. Some items you will have to be 18+ years old to purchase.

10. What about price matching? We will price match any Canada based online or retail store within Canada that ships from within Canada. The only stipulation we have is that the item be currently in stock since some "questionable" business will drop the price on items they do not have in stock or have discontinued.

13. How long will shipping take? We always do our best to get your orders packed up as quick as we can and generally have them out the door within one or two business days, there are times when we get backed up with orders and this may timeframe may get stretched out to three days at most. Once Canada Post has the order it will take another 1-5 business days to get to you depending on how far away you are located from our BC based warehouse.

I hope this info has cleared a few things up for everyone!

This is take 2 of my Modification to my F1 Chrony Chronograph. The purpose of this modification is to improve the low light FPS readings. In my first attempt I used LED Puck Lights but they where the kind that used flat panel LED's and they only had 4 panels per LED Puck which made each LED panel kind of bright. I did get OK with my first mod using LED Puck Lights but not as good as I would like to see.

So here we are with take 2 of F1 Chrony Chronograph LED Puck Light modification and this time around I am using standard bulb styled LED lights and to improve my chances of this working I went with and LED Puck that contained 24 LED bulb lights per puck, this way each light on it's own is a bit dimmer which I feel will give a more diffused lighting effect and hopeful consistent fps readings.

By the way I got these LED Puck Lights at my local dollar store for $2.50 each so not a very expensive modification, especially if they work.

Well... Watch the video and see how they perform...

This video was made to show you the results I got by mounting LED puck lights to the top of my F1 Chrony Chronograph defuser panel in order to improve the low light Feet Per Second readings when using 4.5mm Steel BB's.

I have been struggling with my F1 Chrony Chronograph during the fall and winter months as tit becomes overcast and dark where I live. There have been days where I have gone out to shoot my field test shooting video and not been able to get any Chronograph fps results which is very frustrating because much time and effort goes into the planning setup of each video.

I was given advice from several of my viewers to mount an LED puck style light on the back side of my Chronograph defuser panel and that this helps the Chronograph to read much better in low light situations.

I bought a multipack of the LED puck lights from my local Costco but they did not work as well as I expected them to as they had a panel style of LED rather than the bulb shaped LED which I think may diffuse the light a bit more. My next experiments will be done using LED Puck lights but with the bulb styled LED.

You can watch my video to see how my first attempt using an LED Puck light with my F1 Chrony Chronograph worked out.

Moving on to the head to head comparison of the Tanfoglio Gold Custom versus the Sig Sauer X-Five Sight Rail (Open version). Again like my previous video of the KWC Model M1911 Tac A1 versus the Cybergun-KWC GSG 92-M92, these two Air Pistols feature full size drop out metal magazines that hold the CO2 and 4.5mm steel BB's, along with full blowback with working slide catches, safeties and magazine releases. Both are field Strippable and both have the addition of sight rails with red dot sights for quick target acquisition.

I did not find either sight rail pistol to be all that much more accurate than similar open sight pistols like the KWC Model M1911 Tac A1 and Cybergun-KWC GSG 92-M92, but I did find that target acquisition was much quicker and even when I accidentally double tapped the trigger, the second round was right on target.

In this field test comparison I shoot both guns through my Chronograph to see what kind of feet per second performance each one shoots, I also take them back 30 feet and shoot 10 rounds on a paper target using a semi rested position for true accuracy results.

Watch my Field Test Head to Head Shootout for the Tanfoglio Gold Custom versus the Sig Sauer X-Five Sight Rail:

Buy BB Pistols in Canada 
Buy BB Pistols in the US

Buy KWC Sig P226 X-Five in Canada
Buy KWC Sig P226 X-Five in the US

Here is the third video in a series of Head to Head Air Pistol Shootouts. In this video place the KWC Model M1911 Tac A1 head to head versus the Cybergun-KWC GSG 92-M92.

Both CO2 4.5mm Replica Air Pistols feature full size drop out metal magazines that hold the CO2 and 4.5mm steel BB's. These super realistic BB guns also have full blowback with working slide catches, safeties and magazine releases and they can both be field stripped juts like the real steel versions.

In this field test comparison I shoot both guns through my Chronograph to see what kind of feet per second performance each one shoots, I also take them back 30 feet and shoot 10 rounds on a paper target using a semi rested position for true accuracy results.

Watch my Field Test Head to Head Shootout for the KWC Model M1911 Tac A1 vs Cybergun-KWC GSG 92-M92:

Buy the Swiss Arms P92 in Canada

Buy the Swiss Arms P92 in the US

Buy the KWC Model M1911 A1 Tac Blowback 4.5mm BB Pistol in Canada

Buy the KWC Model M1911 A1 Tac Blowback 4.5mm BB Pistol in the US