Considering I only launched my Facebook Channel back in the summer, getting to 500 likes this quick is pretty good I think. Well I'm happy about it and wanted to share this with you. I post most everything on my Facebook channel so if you have a Facebook account, it may be a good way to keep track of what I'm up to!
Type: BB machine gun.
Manufacturer:ZMZ.
Model:Tyrex PPA-K-01.
Materials: Steel.
Weight: 3.24 pounds.
Barrel: 4.83 inches, metal non-rifled.
Propulsion: 12 gram CO2.
Action: Semi & full auto, single action.
Ammunition Type: 4.5mm steel BB.
Ammunition Capacity: 25 round magazine.
FPS: 328-394 fps.
Trigger Pull: The trigger pull on the ZMZ Tyrex PPA-K-01 is a bit on the heavy side even though it is single action only. In full auto mode this doesn't really matter too much, but in semi auto the heavy trigger can slow down how fast you can shoot your followup shots. You quickly forget about it though because you are having so much fun shooting the Tyrex :)
Accuracy: I was very impressed with the Tyrex PPA-K-01 BB machine guns accuracy in both semi and full auto. I was actually expecting it to do poorly in this area because of the sights, they are inverted or in other words when you are shooting with the stock open, the peep sight would be best suited and when shooting with the stock folded, the pistol "V" sight would be best suited. Unfortunately the setup is backwards on the BB gun version, perhaps a mixup in manufacturing? I may attempt to switch this around at some point. Even with hard to use sights, the Tyrex shot a 1.5 inch 8 shot group in semi auto from 20 feet out and a very respectable full auto burst grouping.
Build Quality: The ZMZ Tyrex PPA-K-01 is not going to win any beauty contests and it's a bit rough around the edges but everything about it is made to last. It's virtually all steel with the exception of the grips and when I say steel, I mean the real hard stuff they put in actual firearms. You won't find any zinc in this BB gun! The Tyrex feel solid and tight with no slop in the moving parts at all, and when you shoot it, it feels like the real thing, minus the loudness and extra recoil of course.
Realism: The Tyrex PPA-K-01 is a very close copy of the Kedr PP-91 (9 x 18 mm Makarov) which is also made in the Russian ZMZ factory. You can tell them apart visually by the grips but other then that they are virtually the same! Based on the quality of the steel used in this gun I would bet money that the BB gun version is made in the same assembly plant and using the same steel.
Purchased From: Private sale
Pros:
All "Steel" construction - Good weight and very solid gun.
Fit of the parts is very good.
Heavy blowback action.
Semi and full auto selectable with a nice high rate of fire in full auto.
Good accuracy in both semi and full auto.
Very Accurate Kedr PP-91replica.
Pretty easy operation.
The folding stock works very well and is very secure.
Not too bad amount off shots for this style - About 2-3 25 round magazines.
If you can find one you will be the only kid on the block with a Tyrex for sure!
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Non adjustable sights.
Peep and "V" sight should be the other way around.
CO2 access can be a bit finicky and be very careful when removing it!
Finish is a bit rough but about what you would expect from many Russian made guns.
Supper hard to find and if you do find one you will pay a lot of money for it.
Comments:
I have been wanting to get my hands on the ZMZ Tyrex PPA-K-01 BB machine gun for some time now and I was willing to pay dearly for it! I am very happy with this purchase not just as a collector piece but one that I plan to take out and shoot often. Here in Canada the real version of this gun is completely unobtainable so this will have to do and even better yet I can shoot it in my backyard! The Tyrex PPA-K-01 is very pleasing to shoot and sounds more like a suppressed real gun then a BB gun adding to the enjoyment of shooting the Tyrex. Perhaps one day I'll swap the rear sight around and really see how well this BB gun shots?
My Vimeo Video Review for the ZMZ Tyrex PPA-K-01 4.5mm BB shooting machine gun:
xProductThumbnail('productid=2930700');
Cybergun Mini UZI (Limited Time Sale - $20 OFF)
C$159.00
xAddToBag('productid=2930700');
I took a look at the Halloween Costume Contest Giveaway videos again and really found it hard to pick a winner so I'm going to ask for your help to make up my mind. I have narrowed the Halloween Costume Videos down to my top 5 picks and have listed them here for you to view and pick your favorite one.
Please watch them all before you decide and for those that did not make the top five, you all did a great job and thanks for taking the time to make a video!
The voting will be open for three days (Ends November 19th at midnight)
My Costume (Soviet Shock Trooper)
Replica Air Guns Halloween Contest
SwitchingToMac Halloween Costume Contest Entry
Replicaairguns.com Costume Contest Entry
GHOST.MP4
Please Pick Your favorite video!!
| My Costume (Soviet Shock Trooper) | |
| Replica Air Guns Halloween Contest | |
| SwitchingToMac Halloween Costume Contest Entry | |
| Replicaairguns.com Costume Contest Entry | |
| GHOST.MP4 | |
| Web Polls | |
We are looking at the arrival of two new barrel lengths for the very popular ASG Dan Wesson 4.5mm BB Revolvers. The two new barrel lengths are the 2.5 inch Silver version and the 4 inch Black version.
Based on the requests I have been getting for more shorter barreled revolvers and the popularity of the 6 inch and 8 inch Dan Wesson's we have already been selling, I know these are going to sell well. And as per usual, I will pick some up for my personal collection and do a full review to share with everyone.
I am hesitant to offer a "Pre-sale" on these two new ASG revolvers with the current Customs delays going on but our last ASG shipment made it through pretty quickly. The expected availability for the ASG Dan Wesson 2.5 and 4 inch Revolvers is at the end of November!
This is a "Pre-sale" item Save $20 (we expect to arrive near the end of November - please make sure to read over our Terms & Conditions concerning "Pre-sale" orders)
Hey everyone, this Youtube video is to let you know a bit about what I have been up to these days and some of my plans for the near future.
It has been getting really busy for me lately and when things don't go exactly as I want them to, the work kind of piles up. So I have recruited some help with some of the backend business related duties to help enable me to be able to spend more time making videos and also respond to the many questions and product inquiries I get each day.
In this video I talk a bit about the recent BB AK-47Police raid and seizure that I was caught up in and a bit on how I was effected by it.
I also let you know about some up-coming new product Categories and products that will add nicely to some of the goodies you will be able to purchase in the Replica Airguns Store.
So make sure to watch this video for all the latest Replica Airguns news!
Looking for an ultra compact, super inexpensive, Italian made air rilfe for target or small pest control? Look no further!
This brand new air Italian made rifle from Kimar in .177 caliber is an ideal first air rifle for plinking targets in the back yard and because of it's very compact size it is excellent for small or first time shooters. Don't assume it doesn't have any power? You get up to 450fps velocities which makes the Kimar K 760 useful for shooting small rodents.
The Kimar 760 is very inexpensive yet has a high quality finish on the synthetic stock and metal work and fires accurate groups from 15 meters out with its open sights which are adjustable for windage and elevation.
And last but not least...
The Umarex Steel Storm Tactical 4.5mm BB gun has a 30 shot spring fed magazine capacity along with a gravity fed 300-round BB reserve that makes reloading even faster and easier! This allows you to shoot 5 6-shot bursts in "full-auto" mode very quickly, you can also shoot in single shot semi-auto mode. The Steel Storm gives the feel of a real gun with realistic blowback action and to keep the fun going, it is powered by dual 12 g CO2 capsules. The CO2 is housed in a drop out styled magazine for easy access.
The Umarex S&W M&P R8 Air Pistol is a CO2 powered 4.5mm BB Revolver. You can also add a tactical flashlight or laser to the integrated accessory rail . The Smith & Wesson M&P R8 has a manual safety and black synthetic grips, as well as fixed front and a windage adjustable rear sights. This BB replica revolver is not only great for plinking, but also makes a good target shooter.
Enjoy the excitement of the Umarex Walther PPK/S, one of the world's most famous pistols made infamous by the popular James Bond 007 movies. Fire 15 steel 4.5mm BB's as fast as you can pull the trigger with its ultra realistic blowback recoil. This air pistol has a heavyweight steel construction with an authentic look and feel you will surly enjoy!
The semi-automatic Makarov, named after its designer, was introduced into the armed forces of the former Soviet Union in 1951. Later on a number of countries in the Warsaw Pact adopted this model as an ordinance pistol for police and military use. Just like the original, the Umarex Makarov CO2 version has both a Double & Single Action trigger, making it very accurate yet fun to shoot rapid fire. It has all the operating elements along with a movable slide. All the important parts of this sturdily built CO2 pistol are made entirely of metal: frame, slide and exterior operating components.
Since making its debut in 1989, the H&K USP (Universal Self-loading Pistol) has gone through considerable development, and it is now widely used as a service pistol by police and armed forces. This 4.5mm BB shooting replica's rugged design and reliability make it interesting to shooters and collectors alike. Non-blowback operation was chosen for this CO2 pistol giving the shooter a system with superior accuracy and a higher number of shots by utilizing the CO2 gas more efficiently.
I addedd a total of 6 new BB pistols to the Replcia Airguns Store and all of them are under $100 Umarex BB shooters. The first one is the Umarex Colt Defender BB Pistol.
The Umarex Colt Defender is an all metal replica of a Colt Classic and just like the original it's compact and handy, this 4.5 mm model is especially easy to use with a very simple design ensuring reliable use. To reload simply press the magazine catch and the single-part grip plate pops out, revealing the 12 g CO2 capsule and built-in internal stick magazine.
One of my viewers sent some photos of his custom sanded and polished two-tone ASG STI Duty One 1911. Ken did an awesome job and it makes me want to do the same to mine :)
He started out by sanding off the paint with 500 grit sandpaper and working his way finer right up to 2000 grit and then finishing off with some Meguiar’s NXT Generation metal polish. The results are amazing - see for yourself!
I am pleased to announce that we have added another target shooter to the Replica Airguns Store and this one also does not require any CO2!
The Xisico XSP180 is a very close copy of the Diana P5 Magnum and is a spring action pistol that packs the power of an air rifle within its compact, lightweight body. At under 17" in length and weighing only 2.5 lbs, the XS180P reaches muzzle velocities of up to 500fps using .177 caliber pellets and up to 400fps using .22 caliber pellets.The XSP180 is packed with performance features.
The picatinny rail underneath the barrel provides many tactical options for the shooter. The competition style hand grips gives a comfortable, natural fit enabling better accuracy. Premier fiber optic adjustable sights as well as an auto/manual safety and adjustable trigger round out the long list of features.
If you haven't already checked out the main review for the RAP4 - RAP5 BB Machine Gun then make sure to read it also. This "update review" is to cover a few extra things that I didn't include in the main review like a comparison of the RAP5 to my Umarex MP5K PDW and some more video of the RAP5 shooting some cans in full auto and recorded in slow motion.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
I have also had some more time to play around with the RAP5 BB gun and get an idea of how many shots you can expect using the dual 12 gram CO2 adaptor and I also tried putting two BB's inside one shell to see how 42 rounds would work shooting in full auto.
I have found one of the more confusion aspects of guns is what defines the trigger action, and I confused this a lot at first but now feel I have a good understanding of what makes a gun Single Action Only, Double Action Only or Single and Double Action.
Your best bet is to watch my attached Vimeo video as it not only describes trigger actions but also has the added benefit of the visual examples of each type of trigger action.
Here is a very quick explanation of what constitutes each type of trigger action:
First off the action is based on the role of the trigger in how it effects the action, not how the slide or the hammer can effect the action of the gun.
A Single Action Only gun does one action (a single action) and that is generally the releasing of the hammer or striker or what have you... Single Action Only guns can not fire without first manually pre-cocking the external hammer or manually pulling the slide or charging handle back first to chamber a round and also pre-cock the action of the gun. Keep in mind that the blowback of the slide or bolt in semi and full auto guns effectively cocks the action of the gun allowing for single action trigger release.
A Double Action Only gun performs dual functions, the pre-cocking of the hammer or striker in the first stage and the releasing of the hammer or striker in the second stage, therefore performing two actions. Double Action Only guns do not have the ability to pre-cock the hammer or striker fully and therefore generally have a heavier trigger pull as the first stage of the trigger is to cock the sprung hammer or internal action.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Single and Double Action guns have the ability to do both, meaning they can be pre-cocked and then fired or fired without pre-cocking simply by pulling the trigger.
Keep in mind that there are some guns that fall in to their own category, take for example the Glock. Glock has been known to actually describer their guns as Double Action Only, when in fact they can not be fired without the slide first being pulled back to partially pre-cock the internal striker - similar to a single action gun. But when you pull the trigger on a Glock you do not simply release the action but rather the trigger first pulls the striker action back the final stage in order to release it, similar to a double action gun.
Again, watch my Vimeo video as I hope the visuals will help you to understand the differences between Single Action Only, Double Action Only and Single and Double Action trigger.
I have to start off by please asking everyone to take a deep breath and try and relax just a bit... I have been afraid to look at my email because so many of you are asking about when the Retay Blank guns are coming and if I was you I would probably be emailing me too!
This is what's happening. Remember the BB AK 47 incident, I know I'm trying to forget about it but it is now effecting how Air and Bank Guns are being handled in customs. The CBSA has been taking a fair bit of the heat with the whole "how did these so called (convertible) AK-47 BB guns get into Canada in the first place". And it looks like importers are now getting punished for the CBSA mistake by the CBSA holding onto flagged imported items for extended periods of time. Don't be fooled, this has turned into a money making opportunity for the CBSA as they have a $1000 per day warehouse storage fee on items being held for import. No this is not a typo, that's $30,000 per month so if you thought your 10x10 storage unit was costing you a boat load then think again!
Thank God I am not an importer or I would be shutting down and perhaps thinking about getting a government job as government employees don't seem to be accountable to anyone and now make even more money by doing even less to help legit Canadian business owners - sorry if I seem a bit miffed, but I was arrested a few weeks ago and hand cuffed in front of my family and then released without any charges or apologies, yet the police still held on to all my business related items for over a week that I need to run my business. And now the CBSA is making it very difficult to import legal products that are the foundation of my business.
And don't think this won't effect you! Because of these extraordinarily high CBSA storage fees, my importer/s will be forced to raise the cost of the items I purchase from them and in turn I will be forced into raising the price I sell these inflated items to my customers. And it has already started... I just raised the price of the Retay Blank Guns so for those of you that already "pre-ordered" you are now getting an even better deal. This of course is offset by the delay and I apologies for this but it is beyond my control.
I hope this all blows over but who knows for sure? My advice is to buy now while prices are still low and most items are still in stock;)
If you already bought a "Pre-sale" Retay blank gun then congrats on saving even more money. If you don't want to take advantage of the savings and would perhaps prefer changing your order to a differnt item, then please contact me with your order number and the item/s you would like to change your order to and I will apply a full credit towards the new item/s.
Make sure to also checkout my update video for the RAP4-RAP5 where I compare the RAP5 to my Umarex MP5K PDW and also take out a bunch of cans...
Type: BB machine gun.
Manufacturer: RAP4.
Model: RAP5 (H&K MP5).
Materials: Metal & Polymer.
Weight: 6-7 pounds.
Barrel: 9.5 inches, metal non-rifled.
Propulsion: CO2 or bulk air.
Action: Semi & full auto, single action.
Ammunition Type: .4.5mm steel BB.
Ammunition Capacity: 21 round magazine.
FPS: 400fps.
Trigger Pull: The trigger pull on the Real Action Paintball RAP5 feels kind of like an on/off switch, even though it is not an electronic switch it kind of feels like one a bit and it seems to need some CO2 or Air pressure in order to operate. Once the pressure is there, you can engage the trigger. The trigger is fairly short and nice and light.
Accuracy: I was pretty impressed with the RAP5 BB machine guns overall accuracy. I did not have to play around to much with my Red Dot scope to get it on target and keeping it on target is easy to do in both semi and full auto modes. I was especially impressed with how well it stayed on target in full auto mode. I like the fact that it pumps out BB's very quickly and they go exactly where you want them too go.
Build Quality: I was very impressed with the overall build quality of the RAP5, it has lots of metal parts exactly where they would be metal on the real MP5 giving the RAP4-RAP5 BB machine gun a very solid feel. Even the magazines feel solid and are made with metal. I was bit concerned about how the RAP5 would feed and shoot the BB & casing combination but it really seemed to work well and the combined full auto and ejecting casings makes the RAP5 a total gas to shoot!
Realism: The RAP5 BB machine gun is extremely realistic, you can even mix and match real H&K MP5 accessory parts! The only way you can tell its not the real steel is the small ejection port where the .43 caliber casings fly out, and they really come out with some momentum! Other then that this BB machine gun is very realistic in how it operates, looks and feels.
Purchased From: RAP4 (Real Action Paintball)
Pros:
Extremely realistic replica of a real H&K MP5.
Lots of metal on this gun.
Ejecting casings makes for a realistic experience.
Semi and full auto selectable with a nice high rate of fire in full auto.
Can customize with actual MP5 add on parts. (stocks, rails, grips)
Good accuracy even in full auto mode.
Can use either CO2 or bulk-air power sources.
Decent 400fps for a full auto machine gun.
Cons:
Not a cheap gun!
Hunting down the ejected casings can be a bit of a chore but they are not expensive to buy.
.43 caliber ejection port on the side is a bit of a giveaway.
Would have liked more options of power-sources when purchasing. (Dual 12 gram CO2 adaptor should come standard)
Comments:
When I heard about this BB machine gun, I new I had to have it and mostly because of the way it feeds and ejects the shell casings, much like a real gun! I'm also a big fan of the H&K MP5 styled rifle and PDW version. I was genuinely impressed with everything about this BB shooter; design, quality, realism and shoot-ability and I hope to one day get the RAP4 (M4 styled) version of this gun which uses the same feeding mechanism. If you want the most realistic looking and operating full auto 4.5mm BB machine gun you can get then this is really it.
Things have been getting busier and busier all the time around here and I tend to answer a lot of the same questions so I thought it would be a good idea to put up a FAQ page. (Requently Asked Questions).
I will most likely be adding to this over time but at least it's a start. You can also checkout my Terms & Conditions page for some more of our Store related information.
Type: .22 caliber rifle.
Manufacturer:ISSC.
Model:MK22.
Materials: Metal & Polymer.
Weight: 6.5 pounds.
Barrel: 16 inches, metal rifled.
Propulsion: Gun Powder.
Action: Semi auto, single action.
Ammunition Type: .22LR caliber rimfire.
Ammunition Capacity: 22 round magazine.
FPS: 1,138 - 1255.
Trigger Pull: The trigger pull on the ISSC MK22 is fairly short with a bit of noticeable break point in it but overall is pretty light. I get the feeling that this may be a striker based action because of the slight tension before the release.
Accuracy: I put about 300 rounds through the ISSC MK22 and took some time getting used to how it felt and also sighting in the sights on my 4 power scope. Once I felt comfortable I setup a new target and placed a full magazine (22 shots) all with in a 2 inch group from 20 yards out (60 feet). I was in a seated position using and elbow based rest. I was very happy with these results.
Build Quality: To me the ISSC MK22 SCAR clone feels like the real deal, it's not till you load it up and fire off a few rounds that you can even tell you are shooting the .22 caliber rimefire version. The MK22 has a lot of metal parts and the fit and finish is very good. You do have to use quality .22 caliber ammo in this guns for the best results because it can be a bit picky and also make sure to also take a bit of extra time when loading your magazines to ensure the ammo is set well to the back of the magazine. I'm not saying you can't use the cheap box ammo but you will have to be prepared to clear a few rounds from time to time.
Realism: It doesn't get any more real than this, the ISSC MK22 is basically an FN SCAR in a smaller cheaper .22LR caliber. But if you want to spend $3000 on the real thing and several hundred dollars per day at the range in ammo then get the full NATO round firing version. Unfortunately my pocket book does not allow for this and I don't think we can even get the larger caliber versions here in Canada. I also go to an indoor range that allows .22 caliber rifles to be used alongside the pistols which makes getting out and using the ISSC MK22 that much easier.
Purchased From: ???
Pros:
One fifth the price of the NATO round firing version to purchase and operate.
Mostly metal construction with good usage of polymer in the right places to keep it light.
Lots of rails to mount just about any type of accessory you can think of.
Nice high capacity 22 round magazine to keep the shoots going.
Versatile flip up multi position sights for pistol or rifle based target acquiring.
Fully adjustable stock with three length positions and check hight position, can also be folded in.
Most bad ass looking .22 caliber rimefire rifle around.
Made in Germany
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Not the Cheapest .22LR on the market in this category but well worth the added price tag.
Can be a bit picky about which bullet's you use in it and how you load the magazine.
The rear stock cheek rest is a bit high when using the pistol sights or a low rise scope, you may need a riser under your scope.
Comments:
As you know, I don't do a lot of actual "real gun" reviews, the ones that use gun powder and shoot lead bullets. I do have a very soft spot for the .22 caliber rifles for a few reasons. Firstly, they are usually more inexpensive to buy and also to shoot as the ammo is only a fraction of the cost of the larger caliber ammo. .22 rimefire guns can also be shot in more areas and at most gun ranges so you are more likely to get better use out of it in the long run. The ISSC MK22 FN SCAR clone is definitely the most impressive .22 caliber tactical styled rifle you can get, at least in Canada and even though it is at the top of the price rang in it's category it is well worth it because it is really a very high quality gun at a reasonable price.
My Vimeo Video Review for the ISSC MK22 FN SCAR Type .22LR:
