I'm getting close to uploading 600 videos now over on the Replica Airguns Vimeo channel, so there are bound to be a lot of similar questions and popular discussions. In this Replica Airguns Vimeo Video I address what I feel are my Top 10 Most Common Airgun Questions and Discussions.
Type: AEG Airsoft Rifle.
Manufacturer: G&G.
Model: GR14 AEG Type 57 R.O.C. Walnut Wood Stock
Materials: Metal, wood & plastic.
Weight: 9 pounds (4.1kg).
Length: 44 Inches (1120 mm)
Barrel: 20 inches (510 mm), smooth bore.
Propulsion: Spring AEG.
Action: Bolt action Semi & Full Auto.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 470 rounds.
FPS: 381-385
Trigger Pull: The trigger on the G&G GR14 Type 57 R.O.C. is like most AEG Airsoft Rifles, being that it is essentially an electric on off switch and not a mechanical one. So it is light with not much take up. You will notice a bit of delay from the time your press the trigger till a BB is released since the electric motor must first pull back the spring and release it.
Accuracy: So far I have not tested out the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle. When I get the chance, I will have to set my paper target up further out than my usual 30 feet! I am also expecting the fps to be a bit higher than the stated factory default since this G&G GR14 AEG Airsoft Rifle is marked as being the "High Muzzle Velocity Version"! Stay tuned for my future Field Test Shooting video for the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle.
Build Quality: The G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle looks to extremely well made with most of the build materials being metal and wood. The only none metal or wood noticeable parts would be the upper hand guard which is made out of some sort of nylon or plastic. I believe the original M14 Rifle upper hand guard was made out of fiberglass. Then Walnut Wood Stock is nicely finished and the metal parts function and look really great.
Realism: In terms of realism the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle is extremely authentic in terms of looks, weight and even overall length and barrel length! Most of the parts operate exactly as they would on the real M14 rifle including the selector switch, safety, magazine release, shoulder rest adjustable sights and bolt.
Available in the: Canada Replica Airguns Store.
Pros:
Lots of metal and wood parts where they would be on the real M14.
True realistic 9 pound weight.
High capacity magazine at 470 rounds.
Sights are adjustable for elevation and windage.
Semi and Full Auto selectable.
Real Walnut Wood Stock.
Flip up metal shoulder rest.
Engraved with "The Republic of China" Chinese Text Markings.
25000 rpm Hi-torque Long axis Motor with 7/8 mm Bearings.
8.4v Large Tamiya Battery System.
Cons:
Does not come with battery or charger.
Not setup as is for a scope.
Comments:
History of the M14 this rifle is based on - "The M14 rifle, formally the United States Rifle. M14 is an American selective fire automatic rifle firing 7.62x51mm NATO (.308 Winchester) ammunition. It was the standard issue U.S. rifle from 1959 to 1970. The M14 was used for U.S. Army and Marine Corps basic and advanced individual training and was the standard issue infantry rifle in CONUS, Europe, and South Korea, until replaced by the M16 rifle in 1970."
So the M14 has a place in our history books and also a place in many of our war veterans hearts. This G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle replica is an excellent example of such a great piece of history, to have one in a working Airsoft version may be the next best option to having the real deal.
My YouTube Review Video of the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle:
Whether you like it or not, most of us have come across an Airgun with an ugly orange tip on it at some point. In most cases you will find the intrusive orange or red tips on Airsoft guns that shoot plastic BB's, in some cases you will even find them on Airguns that shoot either lead pellets and/or steel BB's.
It really comes down to where you live as to what your local gun laws have determined is required for your area. You may even live in a region where Airguns and Airsoft guns are not allowed at all! So for you a red or orange tip on the front would be welcome if it would allow you to own an Airgun or Airsoft gun. What about the entire gun being painted a bright color, well that is the case for some folks so again having a red or orange tips may not be as bad as it originally seemed...
In Canada where I live, we used to only be allowed Airsoft guns that had clear sections as our replica gun laws are very strict and all black Airsoft guns would have fallen iinto the "replica" category if they did not have large clear plastic see-through sections on them. This clear section law was revised somewhat over the last several years to allow for all black Airsoft guns here in Canada. It was determined that many Airsoft guns with higher fps limits could cause a serious injury to a human, making them less of a toy in the eyes of the law and more of a weapon. Because of this, Airsoft guns that are capable of shooting a .20 gram plastic BB at a velocity of 360 fps or "higher" are now considered to be similar in the eyes of the law to a regular steel BB or lead pellet shooting Airgun. In Canada, Pellet and Steel BB guns are actually considered firearms of a sort so this allows the higher fps Airsoft guns to be all black since it can not be a replica of a firearm if it is in fact considered to be a firearm by law.
The long and short of all of this is that here in Canada we do not require our Airsoft guns to have orange or red tips since they are considered more or less to be just like any other Airgun and our Airguns do not have red or orange tips either.
Getting back to the title of this article "No Orange Tip On Your Airsoft Gun! Are You Insane?" I often get folks from the US giving me heck for removing the orange tips from my Airsoft guns or asking me why my Airsoft guns don't have them in the first place. These people even state that I could get in a lot of trouble for this! Perhaps they think I live in the US or that US laws govern Canada as well? I am not sure but I can say for the record that I am not breaking any laws at least here in Canada where I live.
I know in the US that wholesalers and retailers by law have to sell Airsoft guns with the affixed orange tips on them, once the end user receives that gun and depending on which state they live in, it may or may not be legal to remove the orange tip. Again, you will need to look into your local state laws as they are different from state to state in the US.
In this Video Review I show you around the G&G CM16 Raider and Carbine AEG Airsoft Rifle's. Since these AEG Airsoft AR Rifles are a bit large to showcase using my traditional Table Top location I move into my gym and take each gun out of its box to have a good look at them. I talk about some of the main features and specification. The main features being these G&G CM16 AR15 / M16 AEG Airsoft Rifles are all really well priced but also very well made for their rather low overall cost. They do have a primarily all Nylon Fiber build even in the receivers but they still have a nice 4.6 to 5.7 pound weight to them, and once dressed up with a few accessories they come in at a perfect weight that is not too heavy to carry around in just about any game situation. The Nylon material in some way is a better choice in terms of getting scratched and dinged since they will not mark up as easily as painted metals will.
G&G CM16 Raider AEG Airsoft Rifle
Length: 30.5 Inches (776mm)
Weight: 4.5 Pounds (2065g)
Gear Box Bearings:
Motor: 8mm Oilless
Inner Barrel: 14 Inches (357mm)
Magazine: 450 Round Stanag Hicap
Battery Required: Mini 9.6V NiMH Butterfly/Nunchuck or 7.4V Li po Nunchuck
Full automatic and semi automatic select fire
Adjustable Hop up
FPS: 350-400
Lightweight and durable nylon body
G&Gs renowned Version 2 gearbox (upgradeable)
Battery and Charger NOT Included
G&G CM16 Carbine AEG Airsoft Rifle
Length: 31 Inches (786mm)
Weight: 5 Pounds (2250g)
Gear Box Bearings:
Motor: 8mm Oilless
Inner Barrel: 14 Inches (357mm)
Magazine: 450 Round Stanag Hicap
Battery Required: Mini 9.6V NiMH Butterfly/Nunchuck or 7.4V Li po Nunchuck
Full automatic and semi automatic select fire
Adjustable Hop up
FPS: 350-400
Lightweight and durable nylon body
G&Gs renowned Version 2 gearbox (upgradeable)
Battery and Charger NOT Included
Make sure to checkout my Table Top Video and Written Review for the Baikal MP-53M Break Barrel .177 Pellet Air Pistol where I show you around this Russian made target pistol and go over its features and specifications.
This Video Review focuses on the shooting aspects of the Baikal MP-53M. I test it out to see what kind of velocity it can achieve and I also perform an accuracy test to see how straight and true it shoots.
My first test, the velocity test I performed using my Chronograph shooting 5 7 grain RWS lead pellets. the fps ranged from 303 to 341 fps with an average 5 shot reading of 319 feet per second. Keep in mind the Baikal MP-53M is strictly a target shooter and is not meant for pest control so these readings are perfectly adequate for this this pistols purposes. The lower velocity also makes for a nice easy cocking effort.
Moving on to the accuracy portion of this field test shooting review, I performed my usual 30 foot paper target test using a semi rested stance standing in the back with a sandbag up front to rest my hands on. This position is fairly stable but not perfect so there is always so human factor to consider and with a springer which I am not super proficient at so there where a couple of shot that I pulled. For the most part the majority of my shots with stayed within about a 1 inch grouping but I know with practice the Baikal MP-53M would shoot under a half inch for sure.
A couple of side notes about the Baikal MP-53M Break Barrel .177 Pellet Air Pistol... It has a super nice trigger which is very light and crisp which will aid in accuracy for sure. I did find that the rear sight moved around a little bit, it seemed to rise a bit and I had to press down on it just a little to keep my shots consistent. The spring is not terribly strong so recoil is minimal for a springer and it is very easy to cock.
All in all the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is a well made and truly accurate target pellet pistol.
I don't often review target and or hunting rifles since for the most part Replica Airguns is all about well... replica airguns :) I have reviewed some of my own personal spring piston and pump rifles since I have them and there is a cross over in folks that like both the replica airguns and airguns meant for target and or hunting purposes.
We do have a small selection of spring piston rifles in our Replica Airguns Canada store suitable for target and small game so I thought I would point some of them out in this preview video.
Type:BB rifle
Manufacturer: Daisy
Model: Red Ryder.
Materials: Stained solid wood stock and forearm, leather saddle thong.
Weight: 2.2 pounds.
Barrel: 10.85 inches, smooth bore.
Propulsion: Spring.
Action: Lever Action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 650 rounds
FPS: 350.
Ruger Explorer Youth Air Pellet Rifle
Type: Pellet rifle.
Manufacturer: Ruger
Model: Explorer.
Materials: All-weather composite black stock, metal.
Weight: 4.5 pounds.
Barrel: 15 inches, rifled
Propulsion: Spring piston.
Action: Break barrel.
Ammunition Type: .177 caliber lead pellets.
Ammunition Capacity: 1 round.
FPS: 495.
Ruger Air Hawk Combo Pellet Rifle with 4x32 Scope
Type: Pellet rifle.
Manufacturer: Ruger
Model: Air Hawk.
Materials: Wood, metal.
Weight: 8.16 pounds.
Barrel: 18.7 inches, rifled
Propulsion: Spring piston.
Action: Break barrel.
Ammunition Type: .177 caliber lead pellets.
Ammunition Capacity: 1 round.
FPS: 495.
Browning Leverage Pellet Rifle with 3-9x40 Scope
Type: Pellet rifle.
Manufacturer: Browning
Model: Leverage.
Materials: Wood, metal.
Weight: 8.6 pounds.
Barrel: 18.9 inches, rifled
Propulsion: Spring piston.
Action: Under lever.
Ammunition Type: .177 caliber lead pellets.
Ammunition Capacity: 1 round.
FPS: 490.
Browning Gold Series Synthetic Pellet Rifle with 3x9x40 Scope
Type: Pellet rifle.
Manufacturer: Browning / Umarex
Model: Gold Series.
Materials: All-weather composite black stock, metal.
Weight: 8.4 pounds.
Barrel: 14 inches, rifled
Propulsion: Spring piston.
Action: Break Barrel.
Ammunition Type: .177 caliber lead pellets.
Ammunition Capacity: 1 round.
FPS: 495.
Type: Blowback Airsoft Pistol.
Manufacturer: KWC/Cybergun.
Model:Colt M1911 A1.
Materials: Almost all metal.
Weight: 2.15 pounds (976 grams)
Barrel: Metal non-rifled.
Propulsion: CO2
Action: Semi auto blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 17 round full size metal magazine.
FPS: 380 using .20 gram BB's.
This is a Mini Review for the KWC/Cybergun Colt M1911 A1 CO2 Blowback Airsoft Pistol. I have already reviewed other KWC version of this all metal realistic CO2 blowback pistol in both 6mm Airsoft and 4.5mm Steel BB and in a variety of different finishes so if you are interested in a more detailed write up for the Cybergun Colt M1911 A1, you can check out the below links where I have reviewed many variations of virtually the same blowback CO2 airgun made by KWC.
KWC - Cybergun 1911 Style 4.5mm Steel BB & 6mm Airsoft Comparison.
Cybergun - KWC Tanfoglio Witness 1911 CO2 BB Gun Field Strip.
KWC M1911 Model A1 TAC CO2 Blowback BB Pistol Table Top Review.
KWC Cybergun P1911 Swiss Arms CO2 Blowback BB Pistol Field Test Review.
KWC M1911 Model A1 TAC CO2 Blowback BB Pistol Field Test Shooting Review.
Cybergun Blackwater BW1911 R2 Blowback BB Pistol Field Test Review.
KWC Metal Slide CQBP M45 A1 Non-Blowback CO2 BB Pistol Table Top Review.
The results are in for this years Halloween Costume Contest Giveaway and the winner is Gary Vennarucci with his Virginia City Nevada Gunslinger and Madams YouTube Video. I have to say their costumes where bang on and the editing of the video was also top notch, a lot of time and effort went into Gary's video so congratulations to him.
To everyone else that entered. I want to thank you all for taking the time to come up with this years costume, make a video and send me the link. This year we only had 10 entered so the chances of winner where pretty good. Make sure to checkout all of this years entry videos! Next year let's get more people on board and make this contest even more fun!
Watch my Halloween Costume Contest Giveaway 2015 Winner YouTube Video:
Watch Gary Vennarucci's Virginia City Nevada Gunslinger and Madams YouTube Video:
Type: Blowback Airsoft Pistol.
Manufacturer: Socom Gear.
Model:MEU SOC 1911.
Materials: Almost all metal.
Weight: 2.3 pounds (1020 grams)
Barrel: Metal non-rifled.
Propulsion: Gas (Propane, Green Gas)
Action: Semi auto blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 15 round full size metal magazine.
FPS: 300+
Trigger Pull: The trigger pull on the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is I would have to say one of the nicest 1911 single action triggers I have tested so far. The take-up is very slight with an extremely light trigger pull required to release the hammer. Any lighter and I would say it would be too light and perhaps prone to accidental firing.The three hole tactical trigger extends out a little further than some 1911's but feels secure on the finger.
Accuracy: At this point I have not shot the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol but have high expectations based on the overall quality of this pistol and form other reviews I have read on this Airsoft 1911 replica. According to the manufacturers claimed fps, we should get somewhere right around 300 fps. The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol has an adjustable rear sight for windage and we can take care of elevation using the adjustable hop-up so zoning in the Socom Gear US Marine MEU SOC 1911 to shoot dead center on target should not be too difficult.
Build Quality: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is one of those Airguns that really catches your eye, and once you pick it up and hold it in your hands you discover that not only does it look really great but it also feels really great in your hands! The tolerances of the parts are excellent, everything mechanical is smooth without any friction and you can even see the texture of the metal grain through the quality matt black powder finish.
Realism: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is a a fantastic replica of a real steel MEU SOC 1911 used by the US Marine Corps' Marine Expeditionary Unit (MEU). The balance and weight really make this 1911 Airsoft pistol feel like your holding the real deal, all the mechanic parts function as they would compared to the original and the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is fully field stripable.
Available From: The Replica Airguns Store.
Pros:
Heavy full blowback action.
White dot sights (Adjustable for windage).
Super light single action trigger.
Ambidextrous safety and working grip safety.
Full size metal dropout magazine.
Excellent quality, durable black powder coat matte finish .
Enhanced Pro-Grip with brass marine inserts
MEU SOC 1911 Licensed.
Three hole tactical trigger with skeleton hammer.
Comes in a hard shell case with Gemtech Outback II 5-inch silencer and lanyard.
Rail for adding accessories.
Cons:
FPS is kind of low for Canada Market so not one we can regularly get in stock.
A bit on the pricy side.
No option of CO2 magazine.
Comments:
With all the BB and Airsoft 1911's out there what makes the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol stand out from the rest. First off it feel the most believabel when holding it in your hand, it seems ot have that perfect weight and balance that is often hard to replicate in an Airgun. With features like enhanced Pro-Grips with brass marine inserts, MEU SOC 1911 licensing, three hole tactical trigger, ambidextrous safety, super smooth and light single action trigger, White dot adjustable sights and the included hard shell case with lanyard and Gemtech silencer you can not go wrong with the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol.
My Vimeo Video Review for the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol:
Type: BB air pistol.
Manufacturer: KWC.
Model:CQBP M45 A1.
Materials: Metal and plastic build.
Weight: 2.1 pounds (950 grams).
Barrel: 5.2 inches, brass, non-rifled.
Propulsion: CO2 x1.
Action: Semi auto non-blowback, double action only.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 21 rounds
FPS: 394 fps/ 120 m/s.
Trigger Pull: The trigger pull on the KWC Metal Slide CQBP M45 A1 Non-Blowback CO2 BB Pistol was about medium to hard but I have definitely experienced heavier trigger pulls on some guns. It is nice that the trigger is in the style of a 1911 and not your typical lever styled trigger like you will find on some 1911 wannabe's. I imagine if the CQBP M45 A1 has a lever style trigger it would have more leverage and be a bit lighter.
Accuracy: I have not shot the KWC Metal Slide CQBP M45 A1 Non-Blowback CO2 BB Pistol but expect it to perform similar to the Cybergun Sig Sauer GSR Sigarms I reviewed a while back since both guns have similar internals so for now until I do my dedicated Field Test review you can read my Cybergun Sig Sauer GSR Sigarms Review: "Accuracy was decent but not outstanding, I got around a 2.5 inch grouping from a 20 foot away free standing position, shooting just to the left and high on the target. I did find that I was able to zone in a bit better with the Cybergun GSR as I got used to the trigger. I also put the Cybergun Sig Sauer GSR through my Chrony Chronograph and got very close the manufacturers 397 claimed feet per second, actually starting off well above it and settling down to around the 370 FPS mark. My 8 shot average on a new CO2 was actually 422 FPS."
Build Quality: You will find a pretty nice balance of metal and plastic on the KWC Metal Slide CQBP M45 A1 Non-Blowback CO2 BB Pistol. The metal slide, magazine barrel and some literals give it a really decent weight in the hand and the fit and fish feel good overall. The trigger and hammer are not the best aspects of the gun in terms of quality as they are both plastic and both kind of made more for show and less for function.
Realism: The KWC Metal Slide CQBP M45 A1 Non-Blowback CO2 BB Pistol looks and feel the part of a M45 1911 A1 including a full size drop out metal magazine, working magazine release and safety. The slide catch release is none functioning and so is the hammer which does not cock back for single action shooting. It would have been nice to have a single action trigger and a working slide to finish off this pistol but it is meant to be more of an entry level pistol at the end of the day.
Available From: The Replica Airguns Store
Pros:
Good overall weight considering ABS receiver.
Metal slide, Metal Magazine, Metal internals.
All metal magazine holds CO2 and Airsoft BB's
Nice tactical 1911 A1 replica, looks the part.
Should have good FPS and lots of shots per CO2 based on my 4.5mm BB version testing!
Rail for mounting accessories.
Nice white dot sights.
Recessed barrel give it a more realistic look.
True 1911 style looking trigger even though it is double action only.
True 1911 working safety.
Cons:
No blowback - slide does not move either.
Hammer moves but does not cock so no single action shooting.
Non adjustable rear sight.
Trigger action is bit heavy and long so it’s not going to be the fastest action shooter.
Comments:
If you're looking for a lower cost well made 1911 in that classic A1 style but with a little bit of updating like having a Picatinny rail and tactical sights then the KWC Metal Slide CQBP M45 A1 Non-Blowback CO2 BB Pistolmay just be right for you. So it doesn't have blowback or a working slide, on the other hand it has lots of metal on it giving it good weight and feel and with less moving parts there will be less to go wrong down the road. You can also expect to get fps into the 400 range with a decent amount of shots per CO2 so the trade off not having blowback may be worth it for this reason. All in all a nice airgun in the under $100 category.
My Vimeo Videos for the KWC Metal Slide CQBP M45 A1 CO2 Air Pistol:
Manufacturer: KWC.
Model: Mac11 M11.
Materials: Mostly ABS (Plastic).
Weight: 1.2 pounds (531 Grams).
Barrel: Smooth bore with fixed hop-up.
Propulsion: CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type:4.5mm steel BB's - 6mm plastic Airsoft.
Ammunition Capacity:BB 39 rounds - Airsoft 26 rounds.
Trigger Pull: The trigger pull on the KWC Mac 11 M11 is double action only and is rather long and a bit firm so you will get a bit of a finger workout especially when shooting a full 39 rounds from the 4.5mm steel BB version. There is no blowback operation so this is a double action only pistol.
Accuracy: The accuracy and true feet per second performance will be tested when I do my future Field Test Shooting Review shortly (weather permitting).
Build Quality: Overall the KWC Mac 11 M11 CO2 BB - Airsoft Pistol is built fairly well as long as you don't mind the all plastic build. to be honest if you where to drop this all plastic pistol on the ground it would most likely just bounce a couple of times no worse for wear since it is kind of light weight and all. If it was an almost all metal build it would weigh in a lot more and the drop onto a hard surface could easily break the zinc alloy metal parts. That said there is some metal on the KWC Mac 11 M11 CO2 BB - Airsoft Pistol and that would be the folding - sliding stock and of course some internal parts. The rear fold out portion of the stock is actually hardened steel!
Realism: As a replica of a real steel Mac 11 M11, the KWC Mac 11 M11 CO2 BB - Airsoft Pistol looks bang on since it is 1 to 1 scale and at least in terms of looks is virtually identical ot teh real Mac 11. In terms of function, that is a different story since the KWC Mac 11 M11 CO2 BB - Airsoft Pistol does not have many working parts other than the trigger, safety and magazine release. The selector switch, bolt charging handle and bolt are all molded into this gun and their only purpose is to look good! The overall weight is rather light too since most of this Mac 11 pistol is ABS or plastic.
Pros:
First 4.5mm Steel BB Mac 11.
1/1 scale replica definitely looks the part.
Full size drop out magazine that holds the CO2 and BB’s.
High capacity 39 rounds magazine.
Built in metal and steel retractable stock.
Decent fps.
Available in both 4.5mm Steel BB and 6mm Plastic Airsoft versions.
Cons:
Pretty much all ABS, kind of light weight.
No blowback or many working parts.
Kind of long and heavy trigger.
Pretty much everything is moulded into this gun.
Comments:
Too be honest when I first saw the box for the KWC Mac 11 M11 CO2 BB - Airsoft Pistol I was a bit excited, that was until I opened it up and found out I was looking at a pretty much all plastic gun with few working parts and no blowback operation. But after holding it and giving this air pistol a good look over I have to say I am warming up to it a bit more now. After all it is the first Mac 11 M11 4.5mm steel BB pistol that I know of and it 100% looks the part so if you are looking for a replica Mac 11 then this will fill that purpose for sure. Even though it is almost all ABS plastic, this airgun feels solid seems to be really well made. The steel and metal stock is a nice addition and so would have been a metal magazine but overall for a low cost replica BB and Airsoft shooter you do get your moneys worth.
My Vimeo Video Review for the KWC Mac 11 M11 CO2 BB - Airsoft Pistol:
Type: BB air pistol.
Manufacturer: KWC.
Model:Makarov PM.
Materials: Mostly Metal.
Weight: 1.6 pounds (737 grams).
Barrel: 3 inches, smooth bore.
Propulsion: CO2 x 1.
Action: Semi auto, single action only.
Ammunition Type: Steel BB's 4.5mm.
Ammunition Capacity: 15 rounds.
FPS: 303 fps/ 92 m/s.
Trigger Pull: The trigger pull on the KWC Makarov PM CO2 Blowback BB Pistol is really nice. It is single action only since it is a blowback pistol that requires racking the slide to chamber the first round. The take-up of the trigger is slight with a crisp light release, the trigger is definitely not going to get in the way of the accuracy of this pistol.
Accuracy: The accuracy and true feet per second performance will be tested when I do my future Field Test Shooting Review shortly (weather permitting).
Build Quality: Excellent, the KWC Makarov PM CO2 Blowback BB Pistol seems to be really well built like the other full blowback KWC BB and Airsoft pistols I have reviewed and shot in the past. The fit and finish is very good but I expect the electromagnetic black coating to wear off in the high spots fairly quickly but this does give the slight worn in real gun look. In terms of quality it looks like KWC may have even gone to extra effort to beef up some of the areas perhaps prone to breakage like the trigger guard since this pistol is made out of Zink based metals rather than hardened steel like you would find in the real firearm.
Realism: I have to say the KWC Makarov PM CO2 Blowback BB Pistol is a really nice replica overall, perhaps one of the best considering it has full cycle blowback with an all metal full sized drop out magazine. Sure the Baikal MP-654K takes the cake in terms of realism since it is practically a real Makarov rechambered to shoot Steel BB's but the MP-654K lacks blowback operation and the ability to fire quickly using a single action trigger. A couple of drawbacks with the KWC Makarov PM CO2 Blowback BB Pistol that are different from the real steel Makarov PM are the thicker trigger guard and butt plate.
Pros:
Has full cycle blowback operation.
Nice heavy blowback spring makes slide nice and snappy, should have good blowback operation.
All metal build.
All metal full size drop out magazine that holds the BB’s and CO2.
Fully field strip-able.
All part function like a real Makarov.
Open ejection port and reassessed barrel.
No ugly CO2 tab.
Seems to have a really nice single action only trigger.
Internal fixed hop-up for improved accuracy and sustained trajectory.
Cons:
Lower fps because of short barrel and presumable heavy blowback operation.
Magazine base sticks forward a bit more and is thicker than a real steel Makarov.
Trigger guard looks to be thicker than a real steel Makarov.
Comments:
The Makarov is one of my favorite pistols, it's a true classic! So the fact that there is yet another Makarov Air pistol on the market is fine with me. And perhaps the KWC Makarov PM CO2 Blowback BB Pistol might just be the best all around Airgun Makarov hitting all the hot spots us Replica Airgun enthusiasts love... Like full blowback operation, a nice light single action trigger, a full size metal magazine that holds the ammo and the CO2 and of course an all metal build with all those working bits and pieces like you would find on the real steel Makarov PM. But you will have to decide for yourself...
My Vimeo Video Review for the KWC Makarov PM CO2 Blowback BB Pistol:
Wow! Some new 4.5mm Steel BB and 6mm Plastic Airsoft guns and they are all brought to us from KWC. I would expect all of them to be available eventually in both 4.5mm Steel BB and 6mm Plastic Airsoft but for now I have the M11 in both Steel BB and Plastic Airsoft and the Makarov PM and CQBP M45 A1 in Steel BB.
This is just my quick preview video so make sure to watch it as I do show you around the guns fairly nicely but you can expect some more upcoming detailed Table Top and Shooting Videos shortly...
Here are some of the basic specifications for each gun...
KWC Mac11 M11 BB/Airsoft NBB Gun:
Material: Full ABS
Ammo Capacity: BB 39 Rounds - Airsoft 26 Rounds
Operated on CO2, Fit on 12g CO2 cartridge
Recoil: Non-Blowback
Energy 2.5 Joules
Velocity: BB 394 fps/ 120 m/s - Airsoft 499 fps/ 152 m/s
Safety: Manual
Fixed: Hop Up
KWC CQBP M45 A1 BB NBB Pistol with Metal Slide:
Material: Metal & ABS
BB Capacity: 21 Rounds
Operated on CO2 in full size metal magazine
Recoil: Non-Blowback
Energy 2.5 Joules
Velocity: BB 394 fps/ 120 m/s
Ammo: Steel BB
Safety: Manual
KWC Makarov PM All Metal Blowback:
Material: Full Metal
BB Capacity: 15 Rounds
Operated on CO2 in full size metal magazine
Recoil: Blowback
Velocity: BB 303 fps/ 92 m/s
Ammo: Steel BB
Safety: Manual
Fixed: Hop Up
Again I wanted to mention we are having a Halloween sale in our Canada Replica Airguns Store from Thursday October 29th till Sunday November 1st 2015 so don't miss out on this one!
On Saturday I went to a Halloween House party, my Brother in-law and his wife put on a Halloween party pretty much every year, usually a week before which works out great for me since I have kids and Halloween night is usually reserved for them.
Getting dressed up a week before is great since it gives me the opportunity to record a video of me in my final completed Halloween outfit so I can share it with all of you. Even though I don't get to complete in the Replica Airguns Annual Halloween Costume Contest Giveaway, at least I get to have some fun and dress up :)
So enjoy my Rambo Costume this year and if you want to know what was needed to pull off this Halloween Costume then watch this video.
If you're interested in getting involved in this years Replica Airguns 2015 Halloween Costume Giveaway then watch this video.
Before I get into the detail of my Rambo Costume this year I wanted to mention we are having a Halloween sale in our Canada Replica Airguns Store from Thursday October 29th till Sunday November 1st 2015.
Continuing on with the Halloween Theme... this YouTube video showcases my Rambo Halloween Costume components. I will be dressing up in full costume and sharing the video very soon but wanted to show you al my Halloween Costume bits and pieces most of which I already had which made my costume pretty easy and low cost this year :)
So what does one need to be Rambo for Halloween?
Some heavy duty black boots for sure and beat up is better.
You pant choice could be jeans, camo or all black depending on which movie Rambo you pick, I went with Black cargo style pants and an olive green belt.
You are going to want a dark color wife beater (tank top) as this is a classic Rambo attire, another option is to go shirtless if you are brave enough to do so :)
I would imagine most people are not going to have that 80's long hair so you will probably need some sort of a dark brown curly or wavy wig. I figure the bigger the hair the better. To keep all that hair out of your eyes, Rambo often wore a headband in either black or red, this will also help keep the wig in place.
In terms of weaponry a large kick-ass knife should be strapped to one leg and for firepower, go with bigger is better and a classic trusted machine gun like the AK or M60.
One optional item you can add to your Rambo Halloween Costume all be it one I plan to go with is an Ammo Belt because there simply is never too much ammo!
Finish off the entire package with a few days worth of stubble and some makeup to give you that been through hell dirty and bloodied up look.
We have some new cool accessories in our Canada Replica Airguns Store I wanted to share with everyone by making a Vimeo Video Review for these items.
If you watched my recent Halloween Costume Contest Giveaway Video for this year then you know I am going as Rambo an when dressing up as Rambo one need sot be wearing an Ammo Belt to pull of such a roll! The good news is we now have them in our Canada Replica Airguns Store, well at least for now and these are real decompressioned .223 bullets, so in other words the primmers have already been fired and they do not have any gun powder in them. They do look the part and come in a belt configuration containing 80 plus rounds.
I also show off some really high quality Cytac Polymer Holsters and Magazine Pouches along with a Cytac Drop Leg Platform that can be configured to add both the Cytac Holsters and the Mag Pouches to it.
Here are the following Cytac Products I showcase in this YouTube Video Review:
Ergonomically curved hip panel is shaped for comfort.
Silicone rubber padding secures holster in position.
Textured locking mechanism secures trigger guard.
Fully adjustable drawing angle.
Right-handed draw.
Construction: Polymer.
Compatibility: Taurus, PT92, Beretta 92 Variants.
Draw Side: Right.
Package includes: Holster, hex key, changeable belt clip.
Ergonomically curved hip panel is shaped for comfort.
Silicone rubber padding secures holster in position.
Textured locking mechanism secures trigger guard.
Fully adjustable drawing angle.
Right-handed draw.
Construction: Polymer.
Compatibility: 1911 Variants.
Draw Side: Right.
Package includes: Holster, hex key, changeable belt clip.
Cytac T92 Polymer Magazine Pouch:
Alternative of PT92, PT809, PT605 Beretta 92, 92fs.
Make of durable,high-tech black polymer materials.
Paddle design securely slides onto pants waist or belt.
Comfortable Contoured Paddle part with soft silicon materials.
Rotates 360 degrees for every application (small of back, cross draw).
Retention with zero time to disengage magazine.
The Pouch Easy to draw your magazine.
The Mag Pouch Suitable for civilians,bodyguard,off duty policies & military personnel.
Matchable tactical pistol holster and belt loop accessories are available.
Cytac 24/7 Polymer Magazine Pouch:
Alternative of any Beretta Px4, H&K P30, H&K USP Compact (9/40), Ruger SR9, Steyr M Series, S&W Sigma, Taurus 24/7 Magazine.
Make of durable,high-tech black polymer materials.
Paddle design securely slides onto pants waist or belt.
Comfortable Contoured Paddle part with soft silicon materials.
Fully adjustable for cant by included Allen key.
Rotates 360 degrees for every application (small of back, cross draw).
Retention with zero time to disengage magazine.
The Pouch Easy to draw your magazine.
The Mag Pouch Suitable for civilians,bodyguard,off duty policies & military personnel.
Matchable tactical pistol holster and belt loop accessories are available.
Cytac Polymer Drop Leg Platform:
Cytac Drop leg platform offers versatility of a modular platforms.
Compatible with our Cytac holsters and magazine pouches.
High-tech, black polymer main attachment panel.
Fully adjustable straps with side release buckles.
Easily attach holsters, mag pouches and more.
It's that time of the year again and time for the annual Halloween Costume Contest Giveaway!
I love watching all your video entries and this year it will be pretty much the same as last year so make sure to get your Halloween Costume entries in before the November 10th deadline.
Here are the rules:
What is the big prize!
Your choice of KWC or Cybergun (depending on if you are in Canada or the US) full blowback pistols. (Sig X-5, P92, 1911) I am also including some revolver choices, pretty much any of the ASG Dan Wesson's and also the Umarex SAA Peacemakers in either Black or Nickel. Your choice of 4.5mm Steel BB or Airsoft also dependant on what is in stock and available at that time.
I will be creating a Halloween Costume Contest Giveaway 2015 playlist where I will be adding in all the entries so make sure to watch those videos and support everyone else who enters.
Looking forward to seeing everyone's Halloween Costumes!
Type: Pellet air pistol.
Manufacturer:Baikal.
Model:IZH MP-53M.
Materials: Metal & plastic.
Weight: 2.67 Pounds (1211 grams).
Barrel: 8.5 inches, hammer-forged rifled barrel.
Propulsion: Spring piston.
Action: Single shot.
Ammunition Type: .177 caliber lead pellets.
Ammunition Capacity: 1 round.
FPS: 360.
Trigger Pull: The trigger pull on the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is a nice light 2 pounds and the release stage is also crisp, the trigger is not adjustable but it is really nice the way it is with virtually no take-up and a crisp release.
Accuracy: At this point I have only plinked around a bit with the Baikal MP-53M Break Barrel .177 Pellet Air Pistol, I have not really tested it out on a paper target or put any rounds through the Chronograph. It does however seem to have pretty decent power for a low effort springer and I was able to place most shots on my targets down range. Stay posted for my full Field Test Shooting Video where I will put the Baikal MP-53M Break Barrel .177 Pellet Air Pistol through its paces.
Build Quality: The Baikal MP-53M Break Barrel .177 Pellet Air Pistol is made in typical Russian fashion, it may not be super pretty or have the best finishing out there but all the parts are built to last, even the plastic parts are made using weapons grade materials and the 8.5 inch rifled barrel is hammer-forged.
Realism: The Baikal MP-53M Break Barrel .177 Pellet Air Pistol is not a replica gun, it is purely made to be a single shot target pistol for plinking purposes. I would not even recommend the Baikal MP-53M for pest control as it is under powered for that purpose. This pistol is simply for placing lead pellets into targets down range. Nothing more.
Purchased this rifle from: The Replica Airguns Store.
Pros:
Anti-beartrap spring piston mechanism. (No pinched fingers)
Baikal quality hammer-forged rifled barrel.
Fully adjustable sights.
Inexpensive to shoot, all you need is a tin of pellets.
Russian made durability.
Ambidextrous pistol grip.
Easy to cock (only 13 pound cocking effort).
Really light and crisp 2 pound trigger pull.
Cons:
Not supper powerful so not good for pest control.
Trigger is non-adjustable but feels really good anyway.
No easy way to mount a scope or red dot without modifications.
Comments:
The Baikal MP-53M Break Barrel .177 Pellet Air Pistol is a great choice if you're looking for a simple but really well built air springer for target shooting. There are cheaper springers like the Umarex Browning Buckmark and of course there are more expensive springers like the Webley Tempest but if your looking for a reasonably priced, high quality and good overall performing Break Barrel .177 Pellet Air Pistol than the Baikal MP-53M should fit the bill with its hammer-forged rifled barrel, anti-beartrap mechanism, ambidextrous grip and fully adjustable rear sight.
Watch my Vimeo Video Review for this Russian made Spring Piston Air Pistol:
Type: AEG Airsoft Gun.
Distributer:ASG.
Model:CZ Scorpion VZ61
Materials: Metal and plastic (polymer) construction.
Weight: 2.7 pounds (1220 grams).
Length: Open 20.6 inches (522mm) - Closed 10.6 inches (270mm).
Propulsion: AEG.
Action: Semi and full auto.
Ammunition Type: 6mm Airsoft BB's
Ammunition Capacity: 58 round magazine.
FPS: 360+.
Trigger Pull: The trigger pull on the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is what you would expect from your typical AEG Airsoft gun since it is basically an on off switch for the electric circuit, it's light and short. As with most AEG Airsoft guns there is a noticeable sight delay from the time you press the trigger till the gun actually fires a BB since the electric motor must first pull the spring plunger back and then release it to fire a round. Because the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun uses a fairly low voltage battery it is a bit more noticeable than with some other AEG Airsoft guns and I am not sure if there are higher output batteries for this style of battery setup.
Accuracy: At this point I have not yet tested the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun so I do not have any Chronograph fps velocity or paper target accuracy information to provide to you. I plan on performing my Field Test Shooting Review fairly soon so stay posted for that. I can say that since this is the Canada import version it should shoot a .20 gram plastics Airsoft BB at over 360 fps.
Build Quality: The ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is a Chinese made Airsoft gun but I have to say it looks and feels really great. For sure as good as any Taiwanese airgun I have come across! The fit and finish both are excellent and there is a lots of metal in this gun including the main frame, folding stock, front and back sights, charging handle, barrel extension, magazine release, selector switch, pins, trigger and trigger guard.
Realism: The ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is is true to scale, size and weight to that of the real steel CZ Scorpion VZ61 as far as I can tell without actually having a real CZ Scorpion VZ61 in my possession. Everything works in the same manor as the real CZ Scorpion VZ61, like the charging handle, magazine release, selector switch, adjustable rear sight and folding stock.
Can be purchased from: The Canada Replica Airguns Store
Pros:
Lots of metal parts for a good overall realistic weight and feel.
Semi and full auto selectable.
Comes with battery and charger.
Comes with rail attachment for add on accessories
Folding metal stock.
Adjustable rear metal sight.
Working charging/cocking handle
Scorpion VZ61 Licensed.
Cons:
No blowback so ejection port does not cycle while firing.
May be hard to locate extra batteries and magazines since it is not a common style Airsoft charging system.
Fold out stock is not that usable, kind of short and low.
Made in China?
Comments:
I am really looking forward to performing my Field Test Shooting review for the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun and expect it to perform as good as it looks and feels. In terms of size, the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is not much larger than most pistols yet packs a 58 round magazine and AEG reliability and consistency along with true 58 round mag-dump full auto capability. What an awesome sidearm to carry around as your backup gun or tight quarters weapon choice.
Watch my YouTube Table Top Review of the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun:
Type: AEG Airsoft Gun.
Distributer:ASG.
Model:B&T BT5 PDW
Materials: Metal and plastic (polymer) construction.
Weight: 5.3pounds (2400 grams).
Length: Open 24.8 inches (630mm) - Closed 15.6 inches (395mm).
Propulsion: AEG.
Action: Semi and full auto.
Ammunition Type: 6mm Airsoft BB's
Ammunition Capacity: 100 round magazine.
FPS: 312+.
Trigger Pull: The trigger pull on the ASG B&T BT5 PDW 6mm AEG Airsoft Gun is what you would expect from most AEG Airsoft guns since it is basically an on off switch for the electric circuit. It is fairly light and relatively short. As with most AEG Airsoft guns there is a noticeable sight delay from the time you press the trigger till the gun actually fires a BB since the electric motor must first pull the spring plunger back and then release it to fire a round. Higher output batteries will make this less noticeable since the electric motor will run much quicker.
Accuracy: At this point I have not yet tested the ASG B&T BT5 PDW 6mm AEG Airsoft Gun so I do not have any Chronograph fps velocity or paper target accuracy information to provide to you. I plan on performing my Field Test Shooting Review fairly soon so stay posted for that.
Build Quality: The ASG B&T BT5 PDW 6mm AEG Airsoft Gun is a Chinese made Airsoft gun but I have to say it looks and feels really well built in general. I would say easily as good as any Taiwanese gun I have come across! The fit and finish both are excellent and there is a ton of metal in this gun including the main frame, sights, but plate, charging handle, barrel extension, sling mount and magazine release.
Realism: The ASG B&T BT5 PDW 6mm AEG Airsoft Gun is is very true to scale, size and weight to that of the real steel MP5 PDW as far as I can tell without actually having a real MP5 PDW in my hands . I am pretty sure Brügger & Thomet does not actually have an MP5 version in their product lineup or as this ASG model is named BT5 rather than MP5? That said the ASG B&T BT5 PDW 6mm AEG Airsoft Gun is really simply a replica of an HK MP5 PDW and based on that, it's really close in almost every way.
Can be purchased from: The Canada Replica Airguns Store.
Pros:
Lots of metal parts for good overall weight and feel.
Semi and full auto selectable.
Comes with battery and charger.
Folding stock.
Adjustable rear metal sight.
Working Cocking Handle
B&T Licensed.
Cons:
No blowback.
Does not come with rail clamp.
Would of liked a longer higher capacity magazine.
Mine had the wrong charger.
Comments:
I am really looking forward to performing my Field Test Shooting review for the ASG B&T BT5 PDW 6mm AEG Airsoft Gun and hope it performs as good as it looks and feels. I really like my 4.5mm Steel BB Umarex HK MP5K PDW but find it to be a little bit on the lighter side since it is mostly plastic. The ASG B&T BT5 PDW 6mm AEG Airsoft Gun fixes that problem with it's mostly metal build and I also get the added benefit of having full auto that is missing from the Umarex version.
Watch my Vimeo Table Top Review of the ASG B&T BT5 PDW 6mm AEG Airsoft Gun:
