Type:Airsoft Rifle. Manufacturer: Sig Sauer Model:ProForce MCX Virtus. Materials: Metal and Polymer. Weight: 7 pounds (3kg). Barrel: 11.6 inches (295mm). Propulsion: AEG. Action: Semi & Full Auto - SAO Electronic trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 120 (Mid cap). Max FPS: 408 Tested (.20 gram).
Trigger Pull: The trigger on the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is essentially a Single Action Only electric on off switch that can allow for semi and full auto shooting along with a safety position based on the sector switch position. Because of this it is fairly short and light weight. There can be a slight delay from the time you pull the trigger to when the BB is released as since the electric motor needs to first pull back the internal spring before being released. A higher voltage battery will shorten the time between your trigger pull and the Airsoft BB release. Higher voltage battery also increases the full auto cycle rate.
Accuracy: I did already perform my Field Test Shooting Video for the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle so I do have some information to share relating to the shooting abilities of this AEG Airsoft Rifle. During my Velocity Chronograph Test I was able to average 408 fps using .20 gram Airsfot BB’s, that was using the out of the box installed 120 spring. In terms of accuracy, my 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when I placed the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle in full auto it did not open up that much more, only to around 2 inches since there is virtually no recoil to throw off full auto shot placement. You can watch my full Field Test Shooting Video here!
Build Quality: The build quality of the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is exceptional with high quality material inside and out, this Airsoft Rifle is mostly metal with a CNC machined receiver and a hefty 7 pound weight to it. Internally you will find VFC Avalon Gearbox featuring improved bearings, quick change spring system, built in MOSFET, and powered by high torque neodymium magnet motors.
Realism: The Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is designed and licensed by Sig Sauer to be as close to their real steel version of the MCX Virtus as possible in every way. As expected you will find Sig Sauer and Virtus licensing all over, size, handling and weight are also true to the original.
Pros:
Super high quality AEG Airsoft Rifle.
Bolt locks back for easy hop-up adjustments.
Sig Sauer designed and licensed.
Lots of metal parts including the CNC machined metal receiver, rear stock guide rails and most mechanical moving parts.
Lots of mounting points with it’s full length picatinny top rail with M-LOK handguard.
Awesome internals, VFC Avalon Gearbox, quick change spring system, built in MOSFET, high torque neodymium magnet motors.
Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
Performed well in the Field test hitting close to claimed fps and easily shooting a 1.5 inch 10 shot group for 30 feet away.
Cons:
No included sights so you will need to add your own iron, red dot or optical sight.
Battery area is a bit tight so you will need fairly compact batteries.
Comes with orange flash hider but can be swapped out.
On the high end of the price spectrum.
Comments: The Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is not only a looker but also a performer and is one of the higher quality AEG AR Styled Airsoft Rifles out there. I know there are a ton of AR AEG Airsoft Rifles to pick from but if you want something a little bit different then the rest than the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is for sure one to look at. It is a bit more money up front but will offer exceptional performance and the high quality internals will not only perform well but will last the test of time saving you money long term.
Starting with my velocity test, I placed 6 rounds through my Chronpgrah using .20 gram Airsoft BB’s with a fully gassed up magazine. The slowest shot was 332 fps while the fastest shot was 350 fps for a 6 shot average of 337 fps, the temperature was not overly warm in the Sea Can for this Field Test so I would imagine in a warmer shooting conditions the velocity would be a little bit higher.
Switch to my Accuracy test for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle I set myself up using a rested seated shooting position with a sand bag up front for stability. My fresh paper target was 30 feet down range for this test. I was able to place 10 rounds in semi auto all within about 1.5 inches slightly high on the target but well centered left to right. This is just using out of the box already setup hop-up and sight adjustments. I then shot the remaining 25 rounds left in the magazine using several full auto bursts until the magazine was empty and as expected the grouping opened up more since this Gas Blowback Airsoft Rifle really does have some kick and does move around a fair bit.
I really enjoyed testing out the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in the Replcai Airguns Sea Can Indoor Airgun Shooting Range. It performed exactly how I was hoping with mid range velocity and excellent accuracy in semi auto. If you are looking for one of the more realistic and higher quality GBB Airsoft AR-15 type Airsoft Rifles on the market you really can not go wrong with the Tokyo Marui CQBR Block1 GBB Airsoft Rifle as it checks all these boxes!
Yet another Indoor Field Test Shooting Video performed in the Replica Airguns Sea Can Airgun Shooting Range. Today I put the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle through its paces and it came out a winner for sure! I really like the way this AR15 type AEG Airsoft Rifle looks and feels and was hoping to get a good result today, I was not disappointed! I have not yet made my Table Top Video for the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle but plan for this next week, you can watch my Preview Video for some details and specifications in the mean time…
As I always do, I first tested out the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle by shooting several rounds through my Chronograph to see what the actual velocity is in fps. I used .20 gram Airsoft BB’s for this test and was able to get a 6 shot average of 408 fps so perfect for most shooting situations as this is not too hot or too cold. My slowest shot was 402 fps while the fastest shot was 410 so pretty consistent for sure.
Next I placed a fresh paper target 30 feet down range on my ammo trap and proceeded to shoot around 10 rounds into it using a rested seated shooting position with a sand bag up front to help with stability. The first shot out of the barrel felt and sounded like a double shot and this one did strike the target just a tad low so I left that one out of the test results. All the other Airsoft BB’s shot easily within 1.5 inches maybe even a bit tighter and all where well centered left to right but just a bit low on the target most likely because I was using a red dot with a riser that places the sights fairly high. Since the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle can also shoot in full auto I had to give it a try and pretty much emptied the magazine until the target actually fell off the ammo trap. The full auto grouping did open up just a slight bit as expected but only marginally.
I really like the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle, yes it’s an AR15 at it’s core but Sig has made it their own in terms of looks and styling. The performance was also excellent so this gun is not just for show. You will need a sighting system of some sort when you buy it so keep that in mind. I suggest a red dot of some sort but you could add on iron sights if you like more traditional sights.
In this Field Test Shooting Video for the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol I perform two main tests to find out what the velocity and accuracy capabilities are for it first using my Chronograph and shooting several rounds through it averaging out the fps. For the second test I shoot 7 rounds into a fresh paper target 30 feet down range to see how tight of a grouping I can get.
For my Velocity test Beeman claims the P17 2004 Single Stroke .177 Caliber Pellet Pistol is capable of around 410 fps using standard lead pellets which I found to be a very close estimate as my results using 6.9 grain lead pellets achieved a 4 shot average of 404 fps so only 6 fps off the claim. There are lighter lead pellets out there and even lighter alloy pellets so higher velocities are possible using less grain pellets but a decent grain pellet hitting 400+ fps is not bad considering only one pump is required to get max velocity from the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol.
Moving on to the accuracy portion of the test I setup a fresh paper target 30 feet away and proceeded to put 7 rounds into it shooting from a seated and rested shooting position (sand bag up front, seated in the back). I was a bit surprised to only get a 1.5 inch grouping but it seemed like there where three separate sub groups that each overlapped within themselves? I think perhaps when I pumped the gun I may have been disrupting the rear sight a bit as it does have some play in it for adjustments so you want to be careful not to place your hands on the rear sight when cooking the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol. Out of the box the shot placement was fairly well centered with two of the rounds right dead center of the bulls-eye.
I kind of want to do a retest at some point maybe with a different pellet and also making sure not place my hands over the rear sight when cocking the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol as I feel this Target Pellet Pistol is capable of .5 inch groupings. The trigger is really nice and the rifled barrel is a decent length with easy to use sights so this Air Pistol should do a bit better than I was able to get shooting it on this day. Either way it is a really fun gun to shoot and with a bit of time figuring it out I am confident you can get better results than I did.
Trigger Pull: The Single action only trigger pull on the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol is excellent, super light with just a little bit of take-up, the release is very predictable, one of the best target pistol triggers I have reviewed for sure. There is no adjustment but I do not feel it is nessisary at all.
Accuracy: Spoiler alert! Before posting the written version of this review I did make the Field Test Shooting Video so I can give you a little bit of a heads up on how well the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol in its Field Test Shooting Video. In terms of velocity it was really close to the 410 fps using lead pellets and for accuracy I was pleased with there results but feel the gun can do better than the result I got on this day, perhaps a different pellet choice, some more break in time or maybe just me shooting on a different day. That said I confident this gun is very capable of getting groupings under an inch in the right conditions, maybe even 1/2 an inch.
Build Quality: The build quality of the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol is good considering it is a sub $100 target pistol with a great trigger, fully adjustable fiber optic sights and only one pump to get maximum velocity. The outer shell is polymer while the pump and valve body are aluminum with the barrel and main valve made out of steel. the trigger and latch are also metal.
Realism: The Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol is not really a replica of a real steel gun in production per-say but the pistol grips are very Walther P series looking so if you are Walther owner or like the grips on the Walther P series guns then you will enjoy the hold of the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol.
Pros:
Reasonable price for an accurate full featured target pistol.
Safety automatically resets to the safe position when you pump/charge the pistol.
No need for CO2 so very inexpensive to shoot.
Virtually no recoil or vibration like you find in spring piston airguns.
Fiber optic front and back sight, also fully adjustable for windage and elevation.
Quality materials where you need them for expected long life and use.
Only requires one pump for full 410 fps power.
Works great for left and right handed shooters.
Good if you like Walther type pistol grips, same shape and feel as many P series pistols.
Excellent trigger feel and pull.
Cons:
Loading pellets is a bit awkward.
Have to pump it for each shot, no action shooting here.
Not rally a replica if that’s what you are after but generally most Spring Piston or Pneumatic Airguns are not replicas with a couple exceptions.
Comments: So the Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol is not really a Replica or even an action shooter but it does have its place in an airgun collection. I love blasting pop cans just as much as the next person but sometimes I like to slow things down and see how accurate I can get with an Airgun and not be too concerned that the gun is interfering with the accuracy. This is one way to really improve your shooting skills and having to work for each shot makes it that much more rewarding. The Beeman P17 2004 Single Stroke .177 Caliber Pellet Pistol allows you to have a great time honing in your shooting skills for not a lot of cash up front and cost per shot is only whatever the pellets cost you.
In this Preview Unboxing Video I showcase three Pellet Guns from Beeman, one Single Stroke .177 Caliber Pellet Pistol and two Break Barrel .177 and .22 Caliber Pellet Rifles. I don’t go into a lot of details on each Airgun as I am leaving that information for my future Table Top and Field Test Videos. This video is mainly a heads up on these products with links to where you can buy them in our Online Replica Airgun Store.
In this Preview Unboxing Video I take a look at three rifles, two are Airsoft Rifles and one is an Archery Rifle. Then First Airsoft Rifle form Tokyo Marui i s full Gas Blowback all metal build AR 15 of the highest quality and realism while the second Airsoft Rifle from Sig Sauer is an AEG but again a high quality product for sure. Lastly I take a look at Umarex’s lates Airsaber which now sports dual Arrow configuration for quick follow up shots. I do plan to make future more intensive table top and shooting videos for some if not all of thees Rifles but this video will at least wet your appetite a bit.
In this Field Test Review Shooting Video I take the G&G Piranha SL GBB Airsoft Pistol through its paces to find out what we can expect in terms of velocity and accuracy. I perform two main tests, the Chronograph Test where I shoot around 5 rounds and average them out to see what the real world fps is and then I shoot 10 rounds at a paper taggert setup 30 feet downrange to see how tight of a grouping I can achieve with the G&G Piranha SL GBB Airsoft Pistol. I don’t talk much about the specifications and details in this video so if you are interested in that information you can watch my Table Top Video for this Airsoft Pistol here.
Starting first with the Chronograph Velocity Test I loaded .20 gram Airsoft BB’s into both of the supplied magazines and filled them up with propane gas. Often times because the valves may be tuned just a bit differently, you can expect each magazine to shoot a slightly different velocities or fps. This was the case with the G&G Piranha SL GBB Airsoft Pistol as the shorter double stack 25 round magazine averaged 353 fps while the longer single stack 20 round magazine shot a 328 average fps. So 25 fps difference between the two.
Moving on to the accuracy portion of the test I was able to get close to a two inch grouping fairly well centered shooting at a fresh paper target setup 30 feet away from a rested shooting position with my hands on a sand bag up front and sitting in the back. I was having some problems with the shorter double stack 25 round magazine not chambering rounds consistently which meant I had to reset my shooting position many times but even so I was able to get close to a two inch grouping. I did load up a different 25 round magazine from another Piranha Airsoft Pistol I had around and this magazine shot perfectly without any chambering problems so there must be something not exactly right with the short magazine that came with my G&G Piranha SL.
Other than the feeding issue I had for the double stack 25 round short magazine that came with my G&G Piranha SL GBB Airsoft Pistol, the Airsoft gun performed well. It for sure made for an entertaining video spraying Airsoft BB’s all over the Sea Can and trying o figure out why the Airsoft Pisotl was not working as it should. Such is life and at the end of the day it was simply something going on with the one magazine which seemed ot have a problem releasing the Airsoft BB’s into the gas chamber. All that was needed was a new magazine and we where back in business!
In this Field Test Shooting Video I test out the KJWorks CZ P-09 GBB Airsoft Pistol in the Replica Airguns Indoor Sea Can Shooting Range to find out what the velocity and accuracy is using .20 gram Airsoft BB’s. If you’re more interested in details, specifications and close up video of the KJWorks CZ P-09 GBB Airsoft Pistol then make sure to watch my Table Top Video for that information.
Starting with the velocity test I averaged out 6 rounds using my chronograph to find out the fps velocity for the KJWorks CZ P-09 GBB Airsoft Pistol and I was able to get 279.5 fps, the slowest of the 6 shots was 279 with the fastest being 281 so actually fairly closer to each other. I do mention at the end of the video that it felt like the velocity was not consistent because the blowback action to me felt like it was heavier on some shots than others? I felt like this might effect accuracy in terms of elevations if the velocity was not consistent but it ended up not being a factor as far as I could tell.
For my accuracy test I loaded 10 rounds in the KJWorks CZ P-09 GBB Airsoft Pistol and proceeded to place them to the best of my ability into my paper target setup 30 feet down range using a rested and seated shooting position (Sand bag up front, seated on a stool in the back). Even though the grouping spread out to about 4 inches, all but one round stayed within about 2 inches and side to side the spread was closer to about 1.5 inches for all shots. In terms of placement on the target they where all fairly well centered out of the box.
The fps for the KJWorks CZ P-09 GBB Airsoft Pistol is a bit low using the preinstalled short internal barrel that does not allow for the added threaded barrel extension but you could install the short internal threaded barrel and add the external barrel extension to increase the fps to more in the range of 360+. That said you would have a fairly long brass inner barrel protruding from your gun with no way I can see to install a mock suppressor to hide it so it would not look so good this way and there is also the possibility of damaging the thin exposed external barrel. Overall the KJWorks CZ P-09 GBB Airsoft Pistol performed well but I feel needs a little bit of break in time to smooth out the blowback consistency but even as is it shot consistent fps and was able to get most rounds well placed on the center of the target.
Type: Gas Blowback Airsoft Pistol. Manufacturer: KJWorks Model: CZ P-09 Materials: Metal & Polymer. Weight: 2.3 pounds (1050 grams). Length: 9 inches (229mm) total. Barrel: 4.4 inches (120mm),Metal non-rifled smooth bore. (Comes with barrel extension) Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 25rounds. FPS: 376 fps.
Trigger Pull: The trigger pull on the KJWorks CZ P-09 GBB Airsoft Pistol is good in both single and double action shooting modes. Most of the time you will be shooting in single action as the blowback action will do all the work cycling the slide and retracting the hammer allowing for light quick single action follow up shots. If you do decide to drop the hammer in-between shooting you can then pull the double action trigger which is much longer and a bit heavier but this will draw the hammer back and release the trigger as expected with single action shots to follow.
Accuracy: So far I have not made my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol but do expect it to behave much like the ASG distributed version of this same gun which by the way is also made by KJWorks. The only real difference to consider will be the gas used in both of these Airsoft guns as the ASG distributed version uses CO2 while the KJWorks version reviewed in this video uses Green Gas or Propane which will reduce the velocity a little bit. We will find out next week when I make my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol.
Build Quality: KJWorks is know for making high quality products and the KJWorks CZ P-09 GBB Airsoft Pistol is no different. Fit and finish is excellent and the quality of material is also very good with similar materials used as you would expect them compared to the real steel version with the exception of the metals not having to be as high grade because of way less force and pressure on the Airsoft version.
Realism: The KJWorks CZ P-09 GBB Airsoft Pistol is a one to one Replica of the real steel CZ P-09 firearm and on first inspection would be hard to tell apart. You are going to find CZ licensing throughout this Airsoft Pistol in all the right places and all the controls work just like the powder burning CZ P-09. The full blowback operation, reassessed barrel and ability to field strip it also aid in making the shooting experience super realistic.
Pros:
Build quality feels really goods, lots of weight to this Airsoft Pistol.
Full length blowback action.
Accurate licensed CZ P-09 Replica.
Trigger pull is nice in both single and double action.
Picatinny rail for adding accessories like a tac light or laser.
Double stack full size drop out Metal Magazine holds the Green Gas and 25 Airsoft BB’s
No orange tip which is always nice.
Easy to see white dot front and back sights.
Green Gas which when using propane is fairly cheap to shoot.
Easily Field Strippable.
Adjustable Hop-up.
Cons:
Sights don’t seem to be adjustable.
Controls are not fully ambidextrous.
Green Gas version has less velocity than CO2 version.
Comments:
The KJWorks CZ P-09 GBB Airsoft Pistol is really almost exactly like the ASG Distributed version since both are made by KJWorks at the end of the day. There are some slight differences between them like CO2 versus Green Gas and some other very minimal cosmetic changes. I would say go with which ever version is in stock and perhaps is less expensive at the time. You really can’t go wrong as this is a great choice to make for an Airsoft Side arm to use on the Airsoft field or for plinking in your yard or indoor range.
My Table Top Review Video of the KJWorks CZ P-09 GBB Airsoft Pistol:
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: Piranha SL Materials: Metal & Polymer. Weight: 1.85 pounds (838 grams). Length: 10.3 inches (262mm) total. Barrel: 5.6 inches (142.5mm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 20/25rounds. FPS: 370+ fps.
Trigger Pull: The trigger pull on the G&G Piranha SL GBB Airsoft Pistol is typical single action only with a super easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for some quick semi auto shooting with the G&G Piranha SL GBB Airsoft Pistol making it a great fast action shooter with quick target acquisition.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha SL GBB Airsoft Pistol but I expect it to perform similar to the G&G Piranha MK I and TR GBB Airsoft Pistol I made a Field Test Shooting Video for earlier and shoot consistently in the mid to high 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I will confirm these predictions…
Build Quality: Like pretty much all G&G Airsoft guns including the Piranha series, the G&G Piranha SL GBB Airsoft Pistol build quality is really good. Fit and finish are excellent with virtually zero slide wiggle, I like the two tone stainless slide and chrome finish barrel version but the all black looks really good too. As with the entire Piranha line, the SL also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart by using the bullet shaped tool.
Realism: The G&G Piranha SL GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share its looks and feel to that of the Glock but perhaps with an even more modernized look to it. Of course the SL version is elongates. You will find realistic function to the G&G Piranha SL GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be field stripped easily.
Pros:
Good balance of metal and plastic for a balanced and light feel.
Partial slide Blowback operation should allow for even better gas performance and snappy operation.
Fiber optic sights front and back for easy target acquisition.
Has a working trigger safety.
Smaller grips perfect for people with smaller hands. Larger hands work just fine too!
Comes in a well presented soft foam form fitted box case.
New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.
Long bottom rail for adding accessories.
Comes in all black and two tone black and sliver.
Comes with two magazines (20 round short and 25 round extended with fake bullets)
Comes with high quality speed loader.
Threaded barrel tip for add on mock suppressor if you want to.
Cons:
Sights are non adjustable.
Not an actual replica of any specific gun I know of but does share some Glock attributes.
Wish the extended mag held more rounds?
I like the hard shell case better that comes with the other Piranha versions.
Comments:
The G&G Piranha SL GBB Airsoft Pistol is for sure the flashiest version of the Piranha series of G&G Airsoft Pistols with its extended barrel and extended magazine with the fake bullets. I also imagine the extra barrel length will add some addition fps to the velocity and we will find out when I make my Field Test Shooting Video for it shortly. I am hoping the extended magazine holds more than an addition 5 rounds but again we are going to find out in my my Field Test Video so be sure to watch that one! If you don’t mind the additional bulk of the G&G Piranha SL GBB Airsoft Pistol over the MK 1 and TR than you will get an extra magazine and I a bit higher velocity.
My Table Top Review Video of the G&G Piranha SL GBB Airsoft Pistol:
In this Field Test Shooting Video I test out the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the Indoor Replica Airguns Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I start off by putting 5 rounds through my Chronograph and average the fps, I then I setup a fresh paper target 30 feet down range and put (max amount in the magazine) 8 Paintball rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol then checkout my Table Top Video for that information.
Starting with the Chronograph velocity test Umarex says you can expect around 350 - 400 fps which seems rather high to me based on my other Field Tests with similar .43 caliber Paintball Pistols. Perhaps this is using actual Paintballs whereas I was using rubber balls for my testing to reduce the mess in the Sea Can. I was able to average 300 fps using a brand new CO2 in what I would consider to be about a room temperature conditions which means in warmer situations I am sure we can get even higher than the 300 fps I hit on this day.
For the next portion of the Indoor Field Test I loaded 8 rounds into the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol and carefully placed them into a paper target 30 feet down range. I was using my standard seated position in the back with my hands resting on a sand bag up front which I have found to be fairly stable but there will still be some human factor which can effect overall accuracy. My results where about what I was expecting with a Paintball Pistol shooting Rubber Balls, generally they will spread out a bit at 30 feet and in this Field Test my 8 shot group spread out to about 8 inches or so. They did seem to be well centered on the target as a group and if I was shooting at a human sized torso at that distance I would have hit it every time.
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another nice addition to the Umarex / T4E lineup up .43 Caliber Replica Paintball Pistols and if you are a Glock owner and want a Paintball Pistol to train with, then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is about as good as you can get, the only other option would be to go with an Umarex Glock Airsoft or BB Pistol but at least we now have a bunch of options depending on your specific needs!
In this Field Test Shooting Video I test out the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol in the Indoor Airgun Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I first put 5 rounds through my Chronograph and average out the fps and then I setup a fresh paper target 30 feet down range and put 10 rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol then checkout my Table Top Video for that information.
Starting off with the Chronograph velocity test Sig says you can expect around 300 fps. I was able to average 286 fps using a brand new CO2 in what I would consider to be about a room temperature which means in warmer conditions I am sure we can get the claimed 300 fps made by Sig Sauer. I have been able to get higher velocities with other KWC 1911’s so perhaps with slightly lower fps for the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol we may get more shots per CO2?
Next I loaded 10 rounds into the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol and carefully placed them into a paper target 30 feet down range. I was using a seated position in the back with my hands resting on a sand bag up front which is fairly stable but there will still be some human factor which can effect overall accuracy a bit. My results where decent with about a 2 inch grouping that included 6 rounds right in the bullseye so out of the box the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol sights where good to go.
The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is another nice addition to the KWC built 1911 lineup and I do like the Sig Sauer/KWC customization of this version, maybe one of my favorite KWC 1911’s out there? You can expect around 300 fps and nice 2 inch grouping at 30 feet which will make this a perfect action plinker for shooting pop cans or targets at close to medium ranges.
Type:Paintball Gun. Manufacturer:Umarex - T4E. Model:Glock 17 Gen5 Materials: Metal & Polymer. Weight: 726 grams (1.6 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 8 Rounds. FPS: 350-400.
Trigger Pull: The trigger pull on Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger. The internal hammer/striker is engaged from the blowback action reducing the friction on the trigger. In terms of it being similar to a Glock trigger pull it will be a bit heavier and longer but not bad overall.
Accuracy: So far I have not had the opportunity to test the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol out so stay posted for my future Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from it. For now you can watch my Field Test Shooting Video for the Umarex T4E Walther PPQ M2 .43 Caliber Paintball Pistol as it is very similar in design and should for the most part perform about the same.
Build Quality: The build quality of the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol a solid 1.6 pound overall weight with the magazine in. The fit and finish is also very good with virtually no slide wiggle to be found.
Realism: The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is a licensed Glock Replica via Umarex which owns the licensing so you will find Glock licensing and branding throughout this Paintball Pistol. Just looking at the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol you would find it hard to tell the difference between it and the real steel Glock 17 Gen5 but there are some notable differences as in the length of the slide travel which is about half of what you would expect from a real Glock. This is to account for the obvious internal differences to allow for CO2 and paintballs to be used. Overall the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol would make a great training pistol if you are a Glock owner and want to use the closest gun to it.
Pros:
Really great weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the gun.
Good for Glock shooters looking for a training weapon.
Everything works pretty much like the real gun so again great as a training tool.
Easy to see white dot sights front and back.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out so be warned!
.43 caliber barrel opening, adds to realism.
Fully Glock licensed via Umarex.
Comes in a ice hard shell case.
Cons:
Trigger is a bit heavy, not as light as a real Glock, more of a double action trigger in function.
Magazine only holds 8 rounds, so you are going to need extra magazines for sure.
Blowback action is not full blowback, more like a typical half blowback BB gun.
Comments:
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another great addition to the Replica Paintball Pistol options out there and if you are a Glock owner looking for a training gun you can use for some additional trigger time outside of a gun range or want to perform realistic training exercises with live players then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol will fill this need. I am looking forward to testing it out when I make My Field Test Shooting Video as Umarex claims it to have significantly higher fps (350-400) then some of the other replica T4E Paintball guns I have reviewed so far. I guess we will see soon!
Type:BB Pistol. Manufacturer: Sig Sauer Model:1911 Emperor Scorpion. Materials: Mostly all metal build. Weight: 2.1 pounds (953 Grams). Barrel: 4.3 inches (109.2mm) - Non-rifled. Propulsion: 12 gram CO2. Action: Blowback single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 16 round full size drop out metal magazine. Max FPS: 300+.
Trigger Pull: The Single action only trigger pull on the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is typical of what you will find on a KWC Blowback 1911, and that’s a good thing since it is short light and crisp similar to a real 1911 semi auto pistol.
Accuracy: I haven’t done my official field test shooting video so I can not comment exactly on how well this version of the KWC 1911 series will perform, but since I havre reviewed many similar versions of the KWC 1911, it should shoot similarly. That said I hope to expect a velocity around 300-330 fps and a 10 shot grouping between 1.5 and 2.5 inches.
Build Quality: The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol like the other KWC 1911 Blowback BB Pistols has in a sense been perfected over time as the Original Tanfoglio Witness 1911 I Review came out over a decade ago and although it did have a few problems at first with the safety it all got worked out in the end and versions today are well made and reliable. As with all Airguns the metals used are not firearms grade quality so you do need to be a bit more careful with them but if you do you will get years of use out of them.
Realism: The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is a lsenced replica of the real steel Sig Sauer 1911 Emperor Scorpion 45 ACP and from looking at photos on line or the Sig Sauer 45 APC version it is virtually identical in a appearance other than the hammer which on the 45 ACP version seems to have a larger and more oval skeletonized opening. That’s pretty minor in the scheme of things. As this is a full blowback Air Pistol, the mechanical functions mimic the real steal version very well and as expected you can even fully field strip this BB Pistol.
Pros:
Based on the tried and true KWC 1911. Most parts should be mix and match.
Full blowback operation.
Excellent SAO 1911 trigger as expected.
Full metal construction, has great realistic weight to it.
Easy to see white dot sights front and back.
Tactical with ambidextrous safety controls.
Rail for adding on accessories like a laser or Tac light.
Nice reassessed barrel ads to the realism.
Love the two tone color scheme.
Full Sig Sauer licensing.
Looks virtually identical to the real steel Sig Sauer 1911 Emperor Scorpion..
Cons:
Will go through CO2 fairly quickly.
Lower fps because of full blowback operation.
Sights are none adjustable.
Comments: Every time a new Blowback 1911 Airgun comes out I seem to say this one is my new favorite and well here we go again… Not only do I like 1911’s I also really like Sigs. I also seem to be a fan of town tone guns as it makes the parts on the gun really stand out in contrast to each other and I like that look. So when you put all of these things together it makes for a real winner in my books. With so many Blowback 1911 choices out there it is hard to make up ones mind, I would consider the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol to be in the top 3 for sure!
In this Field Test Shooting Video I perform two main test in the Replica Airguns Sea Can using the KJWorks KP-16 GBB Airsoft Pistol. First a chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the KJWorks KP-16 GBB Airsoft Pistol is at 30 feet from the target. If you’re interested more in specifications and details along with close up video of the KJWorks KP-16 GBB Airsoft Pistol then check out my Table Top Video Review for it where I show you around and do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the included internal short barrel and the extended external barrel since the KJWorks KP-16 GBB Airsoft Pistol does come with both in the box to allow for higher fps and easier import into Canada. The KJWorks KP-16 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I used that one first to establish a baseline and was able to achieve a 394 fps 4 shot average. Switching up to the shorter internal barrel without the extension, the velocity was reduces as expected and I got an average 3 shoot velocity of 301 fps. So I can safely say that the barrel extension added an additional 90+ fps to the velocity in this case!
Next I placed a brand new paper target 30 feet down range and shot ten 20 gram Airsoft BB’s into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human error to factor in. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing air turbulence a bit and effect accuracy. I was able to get around a 2 inch grouping with my 10 rounds. The KP-16 GBB Airsoft Pistol shot a bit low and to the left out fo the box, adjusting the hop-up should correct the elevation but in terms of windage there is not sight adjustment other than perhaps playing around with the front removable sight and trying to movie it a bit to the left so as to make it shoot more to the right.
My take on the KJWorks KP-16 GBB Airsoft Pistol is it is a solid Airsoft Shooter with great modern 1911 tactical looks. The white dot sights make it a lot easier for my older eyes to line up on the target which makes this more practical for me. I also like the higher capacity magazine which again makes this a decent side arm for Airsoft wars. If you like the look of the 1911 but want it in a bit more of a modern configuration then the KJWorks KP-16 GBB Airsoft Pistol may just be the way to go!
In this Field Test Shooting Video I perform two main test using the WE 1911 GBB Airsoft Pistol. A chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the WE 1911 GBB Airsoft Pistol is at 30 feet away. If you are interested more in specifications and details along with close up video of the WE 1911 GBB Airsoft Pistol then check out my Table Top Video Review for it where I even do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the internal short barrel and the extended external barrel since the WE 1911 GBB Airsoft Pistol does come with both to allow for higher fps and easier import into Canada. The WE 1911 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I started with that one first and was able to achieve a 383 fps 4 shot average. Switching to the shorter internal only barrel the velocity was reduces as expected and I got an average 3 shoot velocity of 300 fps. So it is safe to say that the barrel extension added an additional 80+ fps to the velocity!
Next I placed a fresh paper target 30 feet down range and shot 10 rounds into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human factor. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing turbulence a bit and effect accuracy. I was able to get around a 2.5 inch grouping with my 10 rounds. The WE 1911 GBB Airsoft Pistol shot fairly well on the bullseye up and down with the out of the box hop-up setting but it did shoot just slightly to the left. Since there are no sight adjustments you will have to factor this into your aim point when shooting out at farther ranges, but at around 30 feet you should not have much problem shooting a human sized target or even a pop can.
All in all the WE 1911 GBB Airsoft Pistol perfumed as expected with consistent fps and a nice 10 shot grouping on my paper target. I did find the sights a bit hard to see as my eyes are not what they use to be so black sighted pistols with whit dot sights make it a lot easier for me to line up my target. People with younger eyes will most likely not have this problem but for us a bit older guys, keep this in mind. If you’re looking for a classic 1911 A1 that performs well and looks really nice then the WE 1911 GBB Airsoft Pistol may be just the perfect fit for you!
In this Update Preview Unboxing Video I take a look at 4 newer products that just came across my table and are in our Replica Airguns Online Stores. One is a CO2 Blowback BB Pistol, one is a CO2 .43 Caliber Paintball Pistol and two are GBB Airsoft Pistols, so a rather nice selection for us to take a look at here! I will be following up this Update Preview Unboxing Video with proper Table Top and Field Test Shooting Video to find out all the details and how well they perform.
Type: GBB Airsoft Pistol. Manufacturer: KJWorks Model:KP-16 Materials: Mostly all metal build. Weight: 2.16 pounds (980 grams). Barrel: 4.5 inches, non-rifled. Length: 9.75 inches. Propulsion: Green Gas / Propane (Can also accept a CO2 Magazine) Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 26 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the KJWorks KP-16 GBB Airsoft Pistol is exactly what your would expect from a 1911 pistol which is always a good thing as 1911’s are generally short and light which makes fast action shooting super fun and easy! There is virtually no take-up in the trigger, and then a predictable nice and light release. Trigger reset is almost non existent like most 1911’s.
Accuracy: I have not yet made my Field Test Shooting Video for the KJWorks KP-16 GBB Airsoft Pistol but plan to next week so stay posted for that video. I will be testing out both the included extended barrel and internal short barrels to see what the velocity difference will be and then when it comes to accuracy I will test out the KJWorks KP-16 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with airflow and accuracy.
Build Quality: The KJWorks KP-16 GBB Airsoft Pistol is a really great looking pistol with its tan with black/dark accent finish. You will find it has that KJWorks solid build quality, it is virtually all metal even including the chunky grips being metal. Fit and finish is excellent, I’m not sure if there is a better made Airsoft 1911 out there?
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the KJWorks KP-16 GBB Airsoft Pistol checks off all the boxes here! All mechanical parts work just like the real steel version and you can easily field strip the KJWorks KP-16 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that If you are not a fan of the compensator extension then you will be happy to know that KJWorks also includes a standard barrel bushing you can replace it with to shorten up the gun and make it look more traditional to a 1911.
Pros:
Full metal gun with good weight to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds 26 rounds.
Versatile magazine options, also works with CO2 magazines.
Easy to see white dot sights front and back.
All working components like the real steel 1911.
Vented extended barrel compensator looks great but can be removed easily.
Comes with extended barrel for higher velocity and easier import into Canada.
Field strip-able.
Cons:
Sights are not adjustable.
Real steel grips will not fit without some modifications.
Comments: In terms of Tactical 1911’s, I would saye the KJWorks KP-16 GBB Airsoft Pistol is one of my favorites out there. I really like the tan with dark highlights and the way KJWorks decided to match up the metal grips with the compensator with what I would call a dark chrome look to them. The KJWorks KP-16 GBB Airsoft Pistol really does look like it is right out of a video game or movie but if you want to dress it down a bit you can also remove the compensator to make it look more like most other Tactical 1911’s. I guess all that’s need to do now is test the KJWorks KP-16 GBB Airsoft Pistol out in the Replica Airguns Sea Can Range and see how well it performs!
My Table Top Video of the KJWorks KP-16 GBB Airsoft Pistol:
Type: GBB Airsoft Pistol. Manufacturer: WE Airsoft Model:1911 A1 Materials: Mostly all metal build. Weight: 1.7 pounds (760 grams). Barrel: 4.5 inches, non-rifled. Length: 8.5 inches. Propulsion: Green Gas / Propane Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 15+1 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the WE 1911 GBB Airsoft Pistol is about what your would expect from a 1911 type pistol which is a good thing since they are generally short and light which makes for easy fast action shooting! There is just a bit of slack in the trigger, perhaps less than a millimeter with a predictable light release. Trigger reset is almost non existent.
Accuracy: I have not yet made my Field Test Shooting Video for the WE 1911 GBB Airsoft Pistol but plan to next week so stay posted for it. I will be testing out both the extended barrel and internal short barrel to see what the velocity difference will be and then when it comes to accuracy I will test out the WE 1911 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with accuracy.
Build Quality: The WE 1911 GBB Airsoft Pistol is a really gorgeous looking pistol in the stainless finish. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all the mechanical parts work and engage nicely. The only thing I noticed was that the ejection port near the front could have been finished a little bit better as there seemed to be some slight ridges in the metal there.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE 1911 GBB Airsoft Pistol is again no exception! All mechanical parts work as intended and you can easily field strip the WE 1911 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with decent weight to it.
Crisp Firm full blowback operation.
Very good fit and finish.
No marking on the metal parts at all, some may like this.
Color matched stainless magazine.
Gun will accept real 1911 grips 99% sure of this :)
All controls work just like there real steel version, safety, slide catch release, safety and grip safety.
Should have good fps with barrel extension, enough for import into Canada.
Very believable working replica of the real steel Colt 1911 A1 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No markings or licensing on the gun if that is important to you?
Perhaps a bit lighter than a real steel 1911 at 1.7 pounds.
Magazine only holds 15 rounds but the real steel 1911 only held 7 rounds.
Comments: As I have mentioned in many of my other videos, I am a huge 1911 fan and even go so far as to prefer the standard Government issue over all others as it is the most basic and closest to its original version. There are a ton of BB and Airsoft Blowback 1911’s available now so it is really hard to pick which one to get understandably. If you are a WE fan then this choice should be fairly easy, if you are not sure about WE then all I can say is this is one of the nicer 1911 A1’s and if you want a lighter weight gun over a heavier gun then that may also play a roll in your buying decision. I can’t comment just yet on performance but I will know shortly so stay posted. If it performs well then there is no reason not pick yourself up on of these WE 1911 GBB Airsoft Pistols!
My Table Top Video of the WE 1911 GBB Airsoft Pistol:
