View fullsize

Type: Pellet Rifle.
Distributer: Webley & Scott.
Model: Valuemax.
Materials: Metal and polymer build.
Weight: 6.4 pounds (2900 grams).
Barrel: 17.7 inches (450mm), rifled.
Total Length: 43 inches (1092mm)
Propulsion: Spring Piston
Action: Break Barrel.
Ammunition Type: .22 Caliber Pellets.
Ammunition Capacity: Single Shot.
FPS: 499.

View fullsize

Trigger Pull: The trigger pull on the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is fairly nice There is a little bit of very light take up followed by a vert light release , the take up or travel length can be adjusted on this Air Rifle but that is the only trigger adjustment you can make and perhaps all that is needed.

Accuracy: I have not performed my Field Test Shooting Video for the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle but I did get to take around 20 or so shots with it when I was trying to get it to diesel for me. It looks ot me like it is going to be nice and accurate as I was not even really going for accuracy and it seemed to already be grouping fairly tight. I was recoding fps using my Chronograph as I was trying to find out if by adding some oil to the spring piston chamber could get it to diesel which it never did for me, I was however to establish that the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle shot right around 470-480 fps using 14.3 grain lead pellets which worked out to right around 7.32 foot pounds of energy. I will know a lot more when I do my official Field Test Shooting Video next week.

View fullsize

Build Quality: Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is built to be a value priced Airgun hence the name (Valuemax), that said it is maid well enough with lots of metal and of course some plastic or in this case mostly nylon as the stock is a solid nylon piece. Other than the stock the plastic parts are found to be in the sights and trigger guard, everything else seems to be metal.

Realism: The Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is not a replica or copy of any real steel gun in production but it does look like a traditional hunting rifle in basic shape so make sure to transport thank airgun as if it was a real gun. Either in a gun case or perhaps a blanket in your trunk and always obey any laws for gun position and transportation in your area.

View fullsize

Pros:

• Inexpensive price tag for well made decent performer.

• Initial test showed to have good accuracy and power! (more to come).

• Fully adjustable sights with optical TRUGLO Fiber Optics.

• Can add a magnified optical scope using the top built in dovetail rail.

• Nylon fiber stock is durable and functional with the addition of a vented rubber buttplate.

• Trigger feels decent and is also adjustable for travel length.

• Rear thumb safety resets after each break of the barrel.

• Nice light and short single action trigger.

• Would be good for small pest control because of decent FPS and good accuracy.

View fullsize

Cons:

• Included sights are mostly plastic.

• The Valuemax version has a more basic less adjustable trigger.

• Detuned down to under 500 fps for Canada import as non-regulated Firearm.

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle to see what it can really do in terms of accuracy so stay posted for that video next week. Overall if you are lucky enough to already have one or can get your hands on one since this rifle is discontinued in some area, I think this is a great Break Piston Air Rifle especially if you live in Canada and want the most bang for your buck. I am not only talking about cost verses features, I also mean power and energy since the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is a .22 caliber Air Rifle that can shoot really close to 500 fps with a nice heavy grain lead pellet achieving decent energy levels reasonable enough for small pest control. The Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is not feature less, it does include a reseting safety, anti bear trap system, dove tail mounts with an included scope stop, fiver optic adjustable sights and a vert ergonomic textured nylon stock. All in all great value for what you pay!

My Vimeo Videos for the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle:

• Buy Break Barrel Spring Pistol Pellet Rifles in Canada

• Buy Break Barrel Spring Pistol Pellet Rifles in the US

View fullsize

In this Field Test Shooting Video I put the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle through the regular Replica Airguns Indoor Field Test by first testing out the velocity and placing several rounds through my Chronograph to see what the actual fps is using both .20 gram and .40 gram Airsoft BB’s. Then I setup a fresh paper target 30 feet downrange and place 10 rounds into it to see how tight of a grouping I can get. If you have not already watched my Table Top Video for this Sniper Airsoft Riffle, then make sure to do so for more details, specifications and close up video.

Starting off with my real world velocity test for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle I decided to use both .20 and .40 gram Airsoft BB’s to see what a difference of double the weigth form the claimed for would actually be since for the most art this Airsoft Sniper Rifle is really meant to be using heavier Airsoft BB’ closer to the .40 gram weight. I was kind of expecting the heavier .40 gram BB’s to shoot almost half as fast since they where double the weight bu this was not the case! I shot 5 rounds with each weight Airsoft BB and with the .20 gram I averaged 479 which was actually faster than claimed, When I switched up to the .40 gram Airsoft BB’s I was surprised to get an average of 373 so only around 100 fps slower!

View fullsize

Moving on to the accuracy portion of my Indoor Field Test here in the Replica Airguns Sea Can, as always I placed a fresh paper target 30 feet downrange and proceeded to shoot 10 .40 gram Airsoft rounds into it from a rested and seated shooting position to allow for best possible results with as little human error added in. I was using a 4x optical scope since the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle has a the added rail on top just fo this purpose and I would imaging most people are going to want to add a magnified scope to this Airsoft Sniper Rifle rather than use the built in pop iron sights that by the way are not adjustable. I know 30 feet is not the range one would be shooting this rifle at but it’s all I have for an indoor shooting range and it will give us an idea of what we can expect shooting further out… as in a nice tight group at 30 feet is going to mean better accuracy than a spread out grouping art 30 feet. I will say the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle probably got one of the best groupings for an Airsoft Rifle that I have tested at 30 feet placing all 10 rounds within about an inch to an inch an a half.

I would like to take this Airsoft Sniper Rifle outside and see what it can do at much further out ranges again using nice and heavy Airsoft BB’s when it gets a bit warmer and stops raining so much :) But for now my Indoor Field Test performed about as good of a result as I can expect. The ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is a really well made which paid off in two it performed for me. I don’t really see any need to upgrade this Airsoft Sniper Rifle other than adding an optical scope and perhaps investing in some high quality Airsoft Ammo.

• Buy the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle in Canada

• Buy Airsoft Rifle in the US:

View fullsize

Type: Airsoft Rifle.
Distributer: ASG.
Model: Steyr Arms Scout.
Materials: Metal and polymer build.
Weight: 6.5 pounds (2950 grams).
Barrel: 14.5 inches (368mm), non-rifled.
Total Length: 39.5 inches (1000mm)
Propulsion: Spring Piston
Action: Bolt action repeater.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 32 round magazine.
FPS: 443.
Type: Black and Grey versions.

View fullsize

Trigger Pull: The trigger pull on the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is short light and crisp. Working the bolt precooks the trigger for single action only shooting allowing for just the release of the hammer. There is very little take up and no creep at all, just a nice light and predictable trigger pull.

Accuracy: I have not performed my Field Test Shooting Video for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle so stay posted for that. ASG claims around 4430 fps velocity with the preinstalled M140 spring, you can upgrade the spring all the way up to an M190 spring for even higher potential fps. In terms of accuracy I am also expecting good results so check back next week for my Indoor Field Test Shooting Video for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle.

View fullsize

Build Quality: The ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is well built with lots of high quality component not only inside but also internally. You will find a metal barrel and receiver along with metal bolt, trigger and rear sight, the front sight is however plastic. I donate really thin k you will be using the pop sights all that much as they are not adjustable and this gun really begs for a nice optical scope. The nylon polymer stock has micro-texturing to help with the grip in all weather conditions.

View fullsize

Realism: The ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is based on the real steel 7.62 NATO Steyr Scout and even incorporates the integrated folding bipod legs like the original. For the most part they look identical but you will find the actual magazine on the Airsoft version is placed further up the stock to allow for the feeding of the Airsoft BB’s which does make the actual inner barrel shorter by about 4-5 inches.

View fullsize

Pros:

• Nylon Polymer stock with micro-texturing.

• Railed metal receiver with laser-etched Steyr trademarks.

• Integrated folding bipod legs on left and right sides of the stock.

• Flip-up backup front and rear sights.

• Accessory slot on bottom of stock for mounting of optional bipod rail.

• Millet QD sling loop attachment points.

• Front dummy magazine.

• Rear dummy magazine with storage for a spare magazine.

• Removable stock spacer pads for length-of-pull adjustment.

• 90 degree trigger with steel sear.

• 90 degree aluminum piston with dual glide rings and steel base.

• Silent Air Brake piston head.

• Silent cylinder head with shock-absorbing padding.

• 9mm stainless steel ball bearing spring guide.

• Bore-up steel cylinder with 12.5% more air volume than stock cylinders.

• Hop-up unit with both side-lever adjustment and TDC screw adjustment options.

• Steel CNC-machined hop-up arm.

• 03mm tight-bore inner barrel.

• 60 degree Modify Predator enhanced hop-up bucking preinstalled (50 and 70 degree buckings available separately).

• Compatible with VSR-spec inner barrels.

• 450 FPS with pre-installed M140 spring.

• Can take up to a M190 spring with no upgrades needed.

Cons:

• 32-round magazine.

• Recommended ammo: 0.36g BBs and above, 0.4g optimal.

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle. I won’t be able to test it out perhaps as far range as I would like to since I will be shooting it in the Replica Airguns Indoor Shooting range which allows me to test at 30 feet. That should give me a good overall idea on at least what it may be capable of since if we can get a tight group at 30 feet we should also be able to get a tight group at longer ranges with proper hop-up and heavier BB selection. I do plan on placing a scope on the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle to give it the best possible chance of performing at it’s best and really hope to see a good result from it.

My Vimeo Videos for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle:

• Buy the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle in Canada

• Buy Airsoft Rifle in the US:

View fullsize

In this Field Test Shooting Video I put the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun through it’s paces by first testing out the velocity placing several rounds through my Chronograph, and then I setup a paper target downrange and place 10 rounds into it to see how tight of a grouping I can get. If you have not already watched my Table Top Video for this Airsoft Sniper Pistol/Rifle then make sure to do so for more details, specifications and close up video.

Starting off with my real world velocity test for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun, I decided to use .28 gram Airsoft BB’s for this entire Field test Shooting video so I was expecting to get somewhere between 20-25% slower fps velocity as compared to the standard tested .20 gram Airsoft BB’s. After placing around 6 shots through my Chronograph I averaged 328 fps which ended up being 18% slower than the claimed 400 fps made by ASG. I would image if I had used .20 gram Airsoft BB’s I may have even exceeded 400 fps.

Moving on to the accuracy portion of my Indoor Field Test here in the Replica Airguns Sea Can, as always I placed a fresh paper target 30 feet downrange and proceeded to shoot 10 rounds into it from a rested and seated shooting position to allow for best possible results with as little human factor added in. I was using a 4x optical scope since the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun does not come with any type of sighting system included so I did have to sight it in initially. I did manage to get a nice 1.5 inch grouping fairly close to the bullseye but I did notice that if I angled the barrel down a bit, BB’s would roll out of the barrel which made me wonder if the hop-up was set high enough to engage a BB.

View fullsize

So I did my second test with the hop-up set in the middle range and this time BB’s did not fall out of the barrel when angled down. After the hop-up adjustment I did notice I was shooting a bit higher which is expected with more hop-up adjustment so if you are experiencing BB’s falling out of the barrel then make sure to adjust your hop-up a bit tighter.

All in all the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun performed very well for me especially once I got the hop-up figured out. And I do think it makes for a really nice compact Sniper Rifle if bulkiness is a factor for you, if not then checkout the Rifle version of this gun with the more traditional but-stock and longer barrel.

• Buy the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Pistol in Canada

• Buy the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Rifle in Canada

View fullsize

Type: Airsoft Rifle.
Distributer: ASG.
Model: Action Army T-11.
Materials: Metal and polymer build.
Weight: 3.9/4.5 pounds.
Barrel: 11.8 inches, non-rifled.
Total Length: 34.7/43.3 inches
Propulsion: Spring
Action: Bolt action repeater.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 50 round magazine.
FPS: 400-430.
Type: Pistol and Rifle versions.

View fullsize

Trigger Pull: The trigger pull on ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is light, short and crisp. There is virtually no take-up and the release point has no creep to it. I would say it is not too light but for sure one of the lighter trigger s I have tested on a Airsoft rifle.

Accuracy: I have not performed my Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun so stay posted for that. ASG claims around 400-430 fps velocity depending on the version which is kind of weird since both have the exact same barrel length internally and I would assume both use the same mechanical part throughout? I don’t have the rifle version to compare to but I will for sure test the velocity using my Chronograph for the pistol version when I do my Field Test Shooting Review along with accuracy performance.

View fullsize

Build Quality: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is well built for sure, it feels really solid in the hadn't and has good overall weigth to it for it’s size. You will find lots of metal parts where they need to be as in the inner and outer barrel, receiver, bolt, trigger, magazine release and I am sure most mechanical internal parts. Fit and finish is also very good.

View fullsize

Realism: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is not a replace of any gun I know of but does have tab least the pistol version does look like a sawn off shotgun more than a sniper rifle. The gun overall all is very modern and ergonomic looking but in terms of being a replica of any specific real steel gun in production I don’t know of any it would resemble?

View fullsize

Pros:

• Top and bottom rails for lots of accessory add on options.

• Can swap over to a rifle version by adding on an interchangeable but-stock.

• Mock magazine allows for storage and transport of tools plus extras.

• Safety switch is in a great location for right handed shooters.

• Comes with included hand stop.

• Solid construction with lots of metal parts where they are important.

• Ability to add side rails.

• Great option if you are looking for a more compact sniper rifle.

• Comes in Pistol and Rifle versions.

View fullsize

Cons:

• Has an orange tip.

• Does not come with sights, will need to add some sort of optical or red dot sight.

• Does not come with speed loader, would have been nice.

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun. I won’t be able to test it out perhaps as far range as I would like to since I will be shooting it in the Replica Airguns Indoor Shooting range which allows me to test at 30 feet. That should give us a good overall idea on at least what it may be capable of since if we can get a tight group at 30 feet we should also be able to get a tight group at longer ranges with proper hop-up and BB selection. I like the option of being able to choose either the Pistol or Rifle version and both should perform about the same. Having the Pistol version will allow for a much more compact Sniper Rifle option much better suited for shooting in a variety of situations.

My Vimeo Videos for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun:

• Buy the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Pistol in Canada

• Buy the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Rifle in Canada

View fullsize

Make sure to watch my Table Top Video Review where I go into more detail about the specifications and details along with some nice close up video of the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle.

In this Vimeo Video Field Test Review I test out the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the indoor Replica Airguns Shooting Range to see how accurate it is and what kind fo velocity we can expect from it.

View fullsize

Starting with the velocity test I averaged out 8 rounds through my chronograph using 8.18 grain lead pellets using the dual 12 gram CO2 setup and I was able to average 445 fps which is not bad as these are mid grain weight pellets, lighter weight pellets would for sure get closer to the 490 fps claimed by Umarex. The temperate was about average room temp so not overly cold or warm.

Moving on to the accuracy test I placed all 9 rounds from the rotary magazine into a fresh paper target setup 30 feet away. I use a reseted seated position in the back with the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle resting on a sand bag up front and I was using the 4 power scope for this test which I setup earlier. My final result was for sure an under one half inch grouping, I did feel like I pulled one shot a little bit but I am sure this Airgun can get quarter inch groupings at 30 feet and I would expect half inch groupings at 50 feet so perfect for mid range small pest shooting.

View fullsize

Umarex does adversities this Air rifle as being very quiet but in Canada we are not allowed to have any type of suppressor even on airguns so I believe this Canada version has been disabled in that regard but the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is fairly quiet for sure with its long barrel and slightly lower fps than the US version. Overall the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is a lot of bang for the buck with the added 4x scope, included magazines that hold 9 rounds each and the ability to use either a dual 12 gram or single 88 gram CO2 setup. It also looks really cool and performs just as good!

• Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in Canada

• Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the US

View fullsize

Type: Pellet Rifle.
Distributer: Umarex.
Model: Fusion 2.
Materials: Metal and polymer build.
Weight: 6.5pounds (2948 grams).
Barrel: 22.5 inches, rifled.
Total Length: 40.3 inches
Propulsion: 12 gram CO2 x2 or 88 gram CO2 x1
Action: Bolt action repeater.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 9 round rotary magazine x2.
FPS: 490.

View fullsize

Trigger Pull: The trigger pull on Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle feels pretty good, it is fairly short and light having a claimed 3.5 pound release which is believable. You will need to obviously work the bolt for each shot that precooks the internal hammer/striker allowing for the short and light trigger.

View fullsize

Accuracy: I have not performed my Field Test Shooting Video for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle so stay posted for that. Umarex has claimed a velocity of around 490 FPS for the Canada version I will be testing, the US version has a claimed velocity of up to 700 for those in the US purchasing this Rifle. I am sure the included 4x32 optical scope once setup will help in the accuracy department when I test this CO2 Air Rifle out on a paper target setup 30 feet down range.

View fullsize

Build Quality: The Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is a fairly low cost target pellet Rifle when you consider it comes with a decent optical scope along with two 9 round magazines but even so the build quality seems very solid coming in at 6.5 pounds. The stock is plastic of course but there is lots of metal where you want it to be as in the bolt, trigger, safety and most other mechanical parts.

View fullsize

Realism: The Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is not a replace of any gun I know of but does sport a very modern ergonomic look with its pistol grip and molded full stock. I like the built in picatinny rail which even though it does not offer any type of open sight configuration will allow for a variety of scope mounting options for near or far shooting.

View fullsize

Pros:

• Low cost for a full featured Air Rifle with included scope.

• Nice ergonomic modern looking design.

• Ability to use either 12 gram or 88 gram CO2 cartridges.

• Comes with 4x32 optical scope and all mounting hardware needed.

• Come with two 9 round rotary magazines.

• May be very quiet if the SilencAir technology is not disabled here in Canada?

• Single action 3.5 pound trigger fells good.

• Safety is large and easy to use.

• M-LOK slots for mounting additional hardware.

Cons:

• No iron sight option if you would prefer that.

• Limited to under 500 fps (Canada version).

• Not sure about the functionality of the SilencAir technology in Canada?

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle to see if it performs as good as it looks. I’ll probably use the duel 12 gram configuration for this test since I don’t plan on shooting 300 rounds with it for my testing. We should also find out if the SilencAir technology has been disabled or not with my Canada version but even so, a 500 fps Air Refile is not going to be all that loud either way at the end of the day. There are not a lot of Bolt Action multi shot pellet Air Rifles out there especially in this price range so I am really hoping it hits a home run when I test it so stay posted for that video…

My Vimeo Videos for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle:

Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in Canada

Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the US

In this Preview Unboxing Video I do an Unboxing and take a quick look at three Bolt Action Rifles, two spring powered Airsoft Rifles from ASG and a dual CO2 powered Pellet Rifle from Umarex.

View fullsize

ASG Action Army T-11 Spring Powered Bolt Action Airsoft Rifle

• 6mm Airsoft BB’s

• Length: 880mm/34,65inch

• Barrel Length: 300mm/11.8inch

• Mag. Capacity: 50 Rounds

• Bolt Action Spring Powered

• Hop up type: Adjustable

• Velocity: 122ms/400fps

• Weight: 1750gr/3.86lb

• Comes in two versions, long and short.

View fullsize

ASG Steyr Scout Spring Powered Bolt Action Airsoft Rifle

• 6mm Airsoft BB’s

• Length: 410/620mm

• Built in Bipod

• Mag. Capacity: 50 Rounds

• Bolt Action Spring Powered

• Hop up type: Click Adjustable

• Velocity: 375fps

• Weight: 2125gr/4.7lb

• Comes in two color version, black or two tone black and grey.

View fullsize

Umarex Fusion 2 Dual CO2 Powered .177 Caliber Pellet Rifle

• .177 Caliber Pellets

• Length: 1016mm/40inch

• Barrel Length: 580mm/22.8inch

• Mag. Capacity:9 Rounds

• Bolt Action CO2 Powered

• 4 x 32 Scope and 2 Magazines Included

• Velocity: 490fps

• Weight: 1580gr/3.5lb

• Can use either 12 or 88 gram CO2

View fullsize

In this Replica Airguns Vimeo Field Test Shooting Video I put the KWC / Umarex Mod. 92 A1 andElite Force 1911 TAC CO2 Blowback Airsoft Pistols through my Indoor Sea Can Shooting Test. Fist I find out what the real world velocity is by placing 5 rounds through my Chronograph and average out the FPS. I then shoot 10 rounds on a paper target for 30 feet back using a semi rested shooting position, sand bag up front and seated in the back.

Starting with my velocity test for both CO2 Blowback Airsoft Pistols I made sure to use a brand new CO2 along with .25 gram Airsoft BB’s so a bit heavier than what was used for the official stats. Both Umarex Airsoft Pistols shot really similar velocities with the Umarex Beretta Mod. 92 A1 averaging 364 FPS and the Umarex Elite Force 1911 TAC averaging 365 FPS. If I had been using .20 gram Airsoft BB’s I am sure these numbers would have been closer to the claimed 400 or so FPS.

View fullsize

Moving on to the accuracy test again I performed this test which each Umarex CO2 Blowback Airsoft Pistol. The Umarex Beretta Mod. 92 A1 performed a little bit better than the 1911 with all 10 shots grouping within 1.5 inches and very well centered on the target. The Umarex Elite Force 1911 TAC did have a slightly wider grouping closer to 2 inches and was a lilt bit high on the target but center nicely left to right. Of course the full auto mode on the Umarex Beretta Mod. 92 A1 did not produce anything even close to a tight group but it is always fun shooting in full auto :)

All in all both of these KWC / Umarex CO2 Blowback Airsoft Pistols performed well for me in terms of meeting their expectations for velocity and accuracy. We have them in our online Replica Airguns Stores in either KWC Unlicensed or Umarex Licensed versions so take your pick!

View fullsize

Type: BB Air pistol.
Distributer: Crosman.
Model: MAKO.
Materials: Metal and polymer build.
Weight: 1.71 pounds (775 grams).
Barrel: 6 inches, non-rifled.
Total Length: 8.6 inches
Propulsion: CO2 x1.
Action: Semi auto blowback, double action only.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 20 rounds.
FPS: 425.

View fullsize

Trigger Pull: The trigger pull on the Crosman MAKO Blowback CO2 BB Pistol is a little on the heavy side since it is double action only and it is also longer again being double action only. That said it is fairly smooth and not super heavy which shoudl allow for decent action shooting. It would have been cane if the hammer could be engaged for single action shooting but the design of the Crosman MAKO Blowback CO2 BB Pistol does not allow for this and therefore the hammer is just for show in this case.

Accuracy: I have performed my Field Test Shooting Video for the Crosman MAKO Blowback CO2 BB Pistol which can be found here. I won’t get into too much detail but overall you can expect velocity to be in the 400 fps range with a brand new CO2 and accuracy was decent form 30 feet away but could be a bit tighter. I was surprised at how snappy the blowback action was for a light weight slide with a light spring in it.

View fullsize

Build Quality: The Crosman MAKO Blowback CO2 BB Pistol feels solid enough in the hand and the materials used I am sure are on par with most Airguns out there but the gun may come across as being on the cheaper side as it lacks some of the more full features of more realistic functioning blowback Airguns. Just don’t let that make you think it is not well made as it is well made and may even be more reliable over time..

View fullsize

Realism: The Crosman MAKO Blowback CO2 BB Pistol looks the part of a beretta M92 at first glance but when you get a little closer you can really tell it is an Airgun at heart which is not a bad thing since that’s exactly what it is. You will find working parts like the magazine release and slide catch release and the slide does function since it is a blowback Airguns but the Crosman MAKO Blowback CO2 BB Pistol does have that funny inner barrel that pops out of the front every time you pull the trigger and parts like the slide safety are moulded into the slide and the hammer is just for show.

View fullsize

Pros:

• Fairly inexpensive.

• High FPS rating for a blowback BB pistol.

• Easy to see Fiber Optic front and rear sights.

• Multi tone color scheme looks good.

• Has a pleasing tactic look to it.

• CO2 tab is nicely hidden inside grip under magazine but plate.

• Double action trigger pull is long but not too firm.

• Picatinny rail for adding accessories.

• Notched grips for a firm hold (best for larger hands)

• Has a working side catch release that locks back after the last shot.

• Has a surprising decent blowback action to it.

Cons:

• Slide action feels clanky.

• Hammer is just for show, does not do anything, no single action shooting ability.

• Grips are large and will be to bog for smaller hands.

View fullsize

Comments:
All in all the Crosman MAKO Blowback CO2 BB Pistol is a fun inexpensive CO2 Blowback BB Pistol that surprised me a bit when I actual got to shoot it. I originally though ti would feel kind of cheap to shoot but the snappy and firm blowback action and higher fps than usually found on blowback Airguns was surprising! The fiber optic sights making lining up target super easy and for a double action only shooter the trigger is not too bad so if you're a Beretta and Crosman fan then perhaps this is the pistol for you.

My Vimeo Video for the Crosman MAKO Blowback CO2 BB Pistol:

• Buy the Crosman MAKO Blowback CO2 BB Pistol in Canada

• Buy Crosman Blowback Airguns in the US

View fullsize

In this Field Test Review Video I test out the performance of the Crosman MAKO Blowback CO2 BB Pistol to see what the real world velocity and accuracy is for this Crosman Blowback BB Pistol. Crosman States 425 fps which is fairly high for a Blowback Airgun so we’ll see if I can get close to it!

Starting with my Velocity Test, I place 5 rounds through my Chronograph using a brand new CO2 with Daisy Zinc coated 5.1 grain Steel BB’s and averaged 390 fps withy the fastest shot hitting 403 fps and the slowest shot going down to 384 fps. It was not super warm in the sea can so I imagine with a bit warmer temperature this number would have been a little bit higher, maybe just up and over 400 which is still impressive for a blowback BB Pistol.

View fullsize

Moving on to my accuracy test, I placed 11 shots (meant to shoot 10) on a fresh paper target 30 feet down range and was able to get all shots within about a 3 inch grouping slightly low and to the left of the bullseye but not far off. I was shooting from a seated position with my hands resting on a sand bag for stability but of course some human factor is involved here.

Overall the Crosman MAKO Blowback CO2 BB Pistol performed decent for a fairly low cost and basic Blowback Airgun. The Blowback action is crisp with a long but not super heavy trigger. I like the fiber optic sights that make lining targets up super easy on virtually any background you are shooting on. This Airgun does have a large grip so keep that in mind if you have smaller hands but other than that it is a really fun Airguns to shoot!

• Buy the Crosman MAKO Blowback CO2 BB Pistol in Canada

• Buy Crosman Blowback Airguns in the US

View fullsize

Type: BB Air pistol.
Distributer: Umarex.
Model: Smith & Wesson M&P9 M2.0.
Materials: Metal and polymer build.
Weight: 1.45 pounds (658 grams).
Barrel: 3.6 inches, non-rifled.
Total Length: 7.5 inches
Propulsion: CO2 x1.
Action: Semi auto blowback, single/double action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 18 rounds.
FPS: 375.

View fullsize

Trigger Pull: The trigger pull on the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol is about medium weight and is on the longer side to allow for the internal mechanism that pushes a BB for the magazine into the breach of the gun with each pull of the trigger. This does add a bit of additional resistance especially when the magazine is full of BB’s. As the magazine empties the spring resistance becomes less and makes the friction on the trigger less noticeable. When the slide blows back this does cock the internal hammer/striker allowing for less trigger pull then if the hammer is not actuated but I would say the trigger feels more like a double action trigger than a single action trigger even though most shots will be fired in single action.

Accuracy: I have not performed my Field Test Shooting Video for the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol so stay posted for that. Umarex has claimed an velocity of around 375 FPS adn this Airgun shoudl be abel to achieve that with it’s partial blowback more effect use of CO2. In terms of accuracy well I guess we will find out when I make my shooting review…

View fullsize

Build Quality: The Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol build quality is fairly decent , fit and finish looks good with not too much slide wiggle and the materials used are both metal and plastic or polymer that look to be good quality.

Realism: The Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol in terms of looking like the real steel version of its counterpart is very close for sure, would be hard to tell without further investigation. Umarex has done a great job of making this Blowback Airguns look believable by covering the CO2 screw, recessing the barrel and even working the manual safety into the right side slide catch release. In terms of operation the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol functions as you would expect other than it can not be easily filed striped and the blowback operation does not cycle back as much as a full blowback gun would.

View fullsize

Pros:

• Very accurate replica of the S&W M&P 9 M2.0.

• Fairly accurate weight and feel to it.

• Metal and plastic parts where you find them on the real steel version, fit and finish is good.

• Working trigger and manual safety and working slide catch and release.

• Full size dropout metal magazine that holds BB's and CO2.

• Warning instructions are discreet under the trigger guard.

• Recessed barrel and hidden CO2 screw for more realistic look

• Fully Smith & Wesson licensed via Umarex.

• Rail for add on accessories.

• White dot sights for easy target acquisition.

• Comes with three sizes of interchangeable grips S/M/L.

• Higher fps and more shots per CO2 than full blowback versions.

Cons:

• Not full blowback but uses partial blowback.

• Manual safety worked into right side slide catch release (Maybe good, maybe bad).

• Sight are not adjustable.

• Trigger is more like a double action trigger.

Comments:
Overall the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol makes for a nice replica Blowback Airgun version of the S&W M&P 9 M2.0. There are some compromises with this version mainly the partial blowback operation that does make the trigger a bit heavier and longer than a true single action trigger would be, the slide does not cycle as fully as expected either and y9ou can not easily field strip this version. That said the shorter blowback action and the way the BB is pushed forward into the breach before each shot means that the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol will have a high FPS and will also get more shots per CO2. So you decide what may be more important to you at the end of the day? True realism or better performance?

My Vimeo Videos for the Umarex Smith & Wesson M&P9 M2.0 CO2 Blowback BB Pistol:

• Buy the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol in Canada

• Buy the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol in the US

View fullsize

UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!

In this Field Test Shooting Video I test out the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS requirement using a .20 gram Airsoft BB. In my previous video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol but swapped out the longer barrel for the shorter barrel to see how much the sorter barrel reduces velocity and also if there is an impact on accuracy? Make sure to watch that video to get the scoop on the shorter barrel with both the Umarex Glock 17 dam Glock 19 GBB Airsoft Pistols

For the velocity portion of this test I placed several .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 355 average FPS reading which is very close to the claimed 360 FPS when using .20 gram Airsoft BB’s so if I had been using a lighter BB I would have for sure seen velocity up and over the 360 FPS.

View fullsize

In terms of accuracy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol also performed really well, maybe not as well as the short barrel Glock 19 Gen 3 I tested just last week that seemed to group just a little bit tighter and was a little bit more well vented on the target. Both the Glock 17 and Glock 19 shot a bit low but I am sure a slight hop-up tweak could rectify that. I did however manage to get around a 2 - 2.5 inch 10 shot grouping.

So in summary both the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols at least for now come with the longer barrels only and so you options are to either cut down the existing barrel or buy a shorter barrel and replace it, that is unless you like the look of the long sticking out barrel ;) You will get a velocity drop of around 75 FPS with the shorter barrel installed but I would say accuracy should be about the same at the end of the day.

• Buy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in Canada

• Buy the Umarex Glock 19 Gen 3 GBB Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

View fullsize

UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!

In this Field Test Shooting Video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS cut off using a .20 gram Airsoft BB. I wanted to see how much of a difference the shorter barrel would make so I will be comparing the short barrel with the long barrel to find out the FPS and accuracy differences. In the Video I only shoot the Umarex Glock 19 Gen 3 GBB Airsoft Pistol with the short barrel but in my next video I Shot the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel for comparison.

For the velocity portion of this test I placed 5 .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 276 average FPS reading with the slowest shot hitting 274 FPS and the fastest shot hitting 278 FPS so really close. Keep in mind I was using .25 gram Airsoft BB’s rather than .20 gram Airsoft BB’s so I would imagine the Umarex Glock 19 Gen 3 GBB Airsoft Pistol even using the shorter barrel should hit closer to 300 FPS with the lighter Airsoft BB’s.

View fullsize

In terms of accuracy the Umarex Glock 19 Gen 3 GBB Airsoft Pistol also performed really well, I did not make any adjustments to the gun after installing the shorter barrel not even to the hopup. I was pleased to see a fairly well centered 10 shot grouping mostly within a 2 inch grouping with perhaps one flyer extending that group to about 2.5 inches. All shots where well centered left to right but just a light bit under the target, a quick hopup adjustment should rectify that.

My next Vimeo Video will be focusing on the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel to see what kind of velocity gains we get for it and if the longer barrel helps with accuracy at all so look for that video early next week!

• Buy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in Canada

• Buy the Umarex Glock 19 Gen 3 GBB Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.

I already made several review videos for both Gletcher NGT (4.5mm Steel BB) and the Gletcher NGT R (.177 Cal Pellet) Revolvers, including table top and shooting videos. So make sure to check those videos out for more information on both versions of Gletcher NGT and NGT R Revolvers.

I did however miss some noteworthy details that I wanted to cover in this video. Firstly, the real steal Nagant M1895 Revolver this Gletcher NGT is styled after has a very unique gas-sealing system that the Airgun version does not replicate or really require but it is worth mentioning.

Here is some more info on how the original Nagant M1895 Revolver Gas Seal System works:

(From Wikipedia) The M1895 by contrast, has a mechanism which, as the hammer is cocked, first turns the cylinder and then moves it forward, closing the gap between the cylinder and the barrel. The cartridge, also unique, plays an important part in sealing the gun to the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the case is slightly reduced in diameter at its mouth. The barrel features a short conical section at its rear; this accepts the mouth of the cartridge, completing the gas seal. By sealing the gap, the velocity of the bullet is increased by 15 to 45 m/s (50 to 150 ft/s.) This feature also eliminates the possibility of injury through the dangerous expansion of gases from the cylinder behind the barrel, which are easily capable of severing a finger if the user holds the gun incorrectly (with a finger positioned in front of the cylinder during fire) - a noted safety-issue in conventional revolvers.

Moving on to some of the features incorporated into the Gletcher NGT NGT-R CO2 BB and Pellet Revolver that I did not point in any of my previous videos. There is an extractor rod that can be used to extract a shell, this is not really necessary on the airgun version since the shells do not expand and tighten on the cylinder as they would n the real steal Nagant M1895 Revolver built is nice that we can replicate this feature with the Airgun version. You can also remove the cylinder completely from both the BB and Pellet shooting Gletcher NGT NGT-R CO2 Revolvers. The cylinder is actually very heavy and adds a lot of weight to this compact 7 shot Revolver.

It is always nice when an Airgun is built in such a way that it replicates the real steal version as closely as possible and the Gletcher NGT NGT-R CO2 BB and Pellet Revolvers do this nearly perfectly.

Buy Gletcher NGT Revolvers in Canada

Buy Gletcher NGT Revolvers in the US

I get asked on a daily bases form many of my Vimeo Viewers about how and if there is a way to get rid of the White lettering on Airguns, Typically people are wanting to remove the intrusive Warning instructions from Airguns like the Cybergun Tanfoglio Witness 1911, the Cybergun/Swiss Arms GSG 92/P92 and many other CO2 Replica Airguns that have lettering or branding that you may want to get rid of.

In this Instructional Tutorial Video I show you how can at least tone down the white lettering and even completely remove it on some Airguns without damaging the Airguns finish underneath the white lettering. You will have to use some patience and perhaps repeat this method a few times but the end result is worth the effort.

The magical product I use to remove the white lettering on many popular Airguns is a product from Birchwood Casey called the Presto Gun Blue Pen. This product is actually designed to touch up real steel gun in areas where the blueing has worn off, lucky for us the Birchwood Casey Presto Gun Blue Pen also works well to remove the ugly white lettering from Airguns.

I have often been asked which of the Shells for the Shell Loading Revolvers work in which Shell Loading Revolvers? After all many of them look a lot alike so can you mix and match Shells for the various types of Shell Loading Revolvers?

In this Vimeo Instructional Video I test out a bunch of Shells to see which ones actually will work or not work in several of the most popular Shell Loading Revolvers.

Some of the Shell Loading Revovers Tested in this Instructional Video are:

• Dan Wesson Classic Revolver (BB, Airsoft, Pellet)

• Dan Wesson 715 Revolver (BB, Airsoft, Pellet)

• Colt Single Action Army Peacemaker (BB, Airsoft, Pellet)

• Gletcher NGT and NGT-R (BB and Pellet)

• Webley Mark VI (BB)

• KWC 357 / Umarex 357 (BB, Airsoft)

• G&G G731 (Airsoft)