Type: Pellet air pistol.

Manufacturer:Xisico.

Model:XSP180.

Materials: Metal & plastic.

Weight: 2.5 pounds.

Barrel: 9.1 inches, metal-rifled.

Propulsion: Spring piston.

Action: Single shot.

Ammunition Type: .22 caliber pellets. (Also available in .177 caliber)

Ammunition Capacity: 1 round.

FPS: 400+.

Trigger Pull: The trigger pull on the Xisico XSP180 is amazing right out of the box. You actually have to be very carful because it doesn't take much to release it. I like mine setup this way but you can adjust it to your shooting style.

Accuracy: Very good, I was expecting to do much worse as I am far from a spring piston expert shooter. Even though I'm not as comfortable on the springers, I found the XSP180 easy to shoot even with the heavier spring piston kick. From 30 feet out I was able to get a tight 1 inch group shooting from a semi rested position. The Xisico XSP180 surprised me yet again with 470 fps average velocities even in the large .22 caliber version I was using.

Build Quality: The Xisico is priced on the lower end for a target pistol and because of this uses perhaps a bit more plastic then similar styled pistols. That said I found the plastic to be good quality and the gun had good overall weight to it. There are times when plastic is better suited then metal and I felt it was used well in this gun. Of course there is metal internally and externally but the main shell is primarily made out of plastic. All the moving parts worked well and felt nice and tight. I did not feel any concern that this gun would let me down.

Realism: The Xisico XSP180 is not a replica of any gun that I know of but it does have a modern look to it with its elongated design and ergonomic features.

Purchased From: The Replica Airguns Store.

Pros:

• Inexpensive spring piston target pistol.

• Reasonable quality for the money.

• I pump - 1 shot.

• Comes in .177 and .22 caliber version.

• Excellent FPS even in .22 caliber, well above claimed.

• Very good accuracy.

• Modern looking and ergonomic design.

• Adjustable Trigger.

• Adjustable Sights with fiber optics.

• Under barrel rail mount for laser or tactical light. (may work with a sight rail)

• Comfortable form fitting grips

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Lots of plastic but looks to be durable.

• Grip shape will only work for right handers.

• No top rail for a red dot or scope.

• Safety is a bit tuff and on the ridged side.

Comments:

I wasn't expecting the world from this spring piston break barrel pistol because it is a more price conscience gun and yes it may not be as refined as the Webley Alecto I also reviewed but I have to say it performed well and exceeded my expectations in most every way. First off, when the manufacturer claims 400 fps from the .22 caliber version this usually means the absolute best case scenario! I used medium grain pellets and still got some amazing chronograph results from this spring piston shooter right up into the 470 fps range. Secondly, being a springer with a heavy recoil, I figured it would effect my shot placement but again I was surprised and shot as tight a group as I can expect from any pistol with open sights from 30 feet out. lastly, again if you can get your head around the plastic, this gun feels well made and I would expect a lot of good times shooting with it for many years. If you're on a bit of a budget but want a compact shooter you can target shoot with or even take down small to medium sized pests, then grab yourself a Xisico XSP180.

Looking for an ultra compact, super inexpensive, Italian made air rilfe for target or small pest control? Look no further!

This brand new air Italian made rifle from Kimar in .177 caliber is an ideal first air rifle for plinking targets in the back yard and because of it's very compact size it is excellent for small or first time shooters. Don't assume it doesn't have any power? You get up to 450fps velocities which makes the Kimar K 760 useful for shooting small rodents.

The Kimar 760 is very inexpensive yet has a high quality finish on the synthetic stock and metal work and fires accurate groups from 15 meters out with its open sights which are adjustable for windage and elevation.

• .177 pellets up to 450 FPS
• Break barrel spring piston
• Synthetic all weather stock
• Adjustable rear sight for windage and elevation
• Ultra compact
• Made in Italy

Buy Pellet Rifles in Canada

Buy Pellet Rifles in the US

I am pleased to announce that we have added another target shooter to the Replica Airguns Store and this one also does not require any CO2!

The Xisico XSP180 is a very close copy of the Diana P5 Magnum and is a spring action pistol that packs the power of an air rifle within its compact, lightweight body. At under 17" in length and weighing only 2.5 lbs, the XS180P reaches muzzle velocities of up to 500fps using .177 caliber pellets and up to 400fps using .22 caliber pellets.The XSP180 is packed with performance features.

The picatinny rail underneath the barrel provides many tactical options for the shooter. The competition style hand grips gives a comfortable, natural fit enabling better accuracy. Premier fiber optic adjustable sights as well as an auto/manual safety and adjustable trigger round out the long list of features.

• Break barrel spring piston design
• 2.5 pounds
• 16.56 inches long
• 9.1 inch barrel
• .177 or .22 caliber
• Up to 500fps
• Fiber Optic Sights
• Target style grips with thumb rest
• Adjustable trigger
• Automatic safety
• Under barrel Tactical Rail

Xisico XSP180 Break Barrel Spring Action Pistol

C$149.00

Caliber.177 Caliber.22 Caliber

I have found one of the more confusion aspects of guns is what defines the trigger action, and I confused this a lot at first but now feel I have a good understanding of what makes a gun Single Action Only, Double Action Only or Single and Double Action.

Your best bet is to watch my attached Vimeo video as it not only describes trigger actions but also has the added benefit of the visual examples of each type of trigger action.

Here is a very quick explanation of what constitutes each type of trigger action:

First off the action is based on the role of the trigger in how it effects the action, not how the slide or the hammer can effect the action of the gun.

A Single Action Only gun does one action (a single action) and that is generally the releasing of the hammer or striker or what have you... Single Action Only guns can not fire without first manually pre-cocking the external hammer or manually pulling the slide or charging handle back first to chamber a round and also pre-cock the action of the gun. Keep in mind that the blowback of the slide or bolt in semi and full auto guns effectively cocks the action of the gun allowing for single action trigger release.

A Double Action Only gun performs dual functions, the pre-cocking of the hammer or striker in the first stage and the releasing of the hammer or striker in the second stage, therefore performing two actions. Double Action Only guns do not have the ability to pre-cock the hammer or striker fully and therefore generally have a heavier trigger pull as the first stage of the trigger is to cock the sprung hammer or internal action.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Single and Double Action guns have the ability to do both, meaning they can be pre-cocked and then fired or fired without pre-cocking simply by pulling the trigger.

Keep in mind that there are some guns that fall in to their own category, take for example the Glock. Glock has been known to actually describer their guns as Double Action Only, when in fact they can not be fired without the slide first being pulled back to partially pre-cock the internal striker - similar to a single action gun. But when you pull the trigger on a Glock you do not simply release the action but rather the trigger first pulls the striker action back the final stage in order to release it, similar to a double action gun.

Again, watch my Vimeo video as I hope the visuals will help you to understand the differences between Single Action Only, Double Action Only and Single and Double Action trigger.

Type: Pellet Air Pistol.

Manufacturer: Crosman.

Model: 1377 American Classic.

Materials: Metal & plastic.

Weight: 2 pounds.

Barrel: 10.25 inches, metal rifled.

Propulsion: Multi-pump pneumatic.

Action: Bolt-action single shot, single action only.

Ammunition Type: .177 caliber pellet.

Ammunition Capacity: 1 round.

FPS: 495.

Trigger Pull: The trigger pull on the Crosman 1377 American Classic is non-adjustable but is short and light with virtually no creep at all, it's just right there! It makes for very accurate shot placement.

Accuracy: I found the Crosman 1377 to be an amazing target pistol, getting about a 1/2 inch grouping from 30 feet out in a semi-rested position. And I performed my accuracy test twice with the same result each time. I also put the America Classic through the Chrony Chronograph test using increasingly more pumps each time and got it up into the 460+ fps range with 15 pumps using 6.9 grain RWS lead pellets. Keep in mind this is the Canadianized version that has been release valve limited to under 500 fps, so over-pumping should not hurt this gun too much, but either way do so at your own risk as Crosman says it's a 10 pump gun...

Build Quality: The Crosman 1377 American Classic is not a fancy looking gun but it gets the job done with a mostly metal design and build. Remember this gun has been around for 40 years and has pretty much stayed the same so Crosman must be doing something right with it.

Realism: The Crosman 1377 pellet pistol is not a replica, it is a target airgun, so it looks like a target air pistol and for that we'll give it high marks ;)

Available at: The Replica Airguns Store.

Pros:

• Very inexpensive target pistol at $59.

• Amazing accuracy!

• Ability to regulate power with the amount of pumps.

• Mostly metal construction.

• Rifled barrel.

• Adjustable sights for windage and elevation.

• Light and short single action trigger.

• Would be good for small pest control because of its decent FPS and excellent accuracy for precise shot placement ability.

• Lots of mods and upgrades available for this gun!

• It has been around for 40 years!

Cons:

• Trigger is a bit thin (but can be upgraded)

• Sights are fully adjustable but a bit hard to adjust.

Comments:

The Crosman 1377 America Classic .177 caliber pellet pistol is a must have target air pistol, even though I own the much more full featured (and pricey!) Webley Alecto .22 caliber multi-pump pneumatic target air pistol, the Crosman 1377 is still great to own and shoot. I think one day I will pass my 1377 down to my son when he is ready to learn the art of accurate pistol target shooting. The fact that you can head out for the day with the 1377 America Classic in one hand and a tin of .177 caliber pellets in the other and shoot till you can't shoot any more, with no CO2 required makes it very inviting - and pretty much everything you point it at will get nocked down or nailed dead on.

Buy Pellet Pistols in Canada 

Buy Pellet Pistols in the US

I received my Crosman American Classic .177 Multi-pump Bolt Action Pellet Pistol a few days ago and had a bit of time to shoot yesterday. I was extremely impressed with this very inexpensive classic single shot bolt action target pistol. Even using the stock open sights, I shot a group about 1 inch in diameter from a 30 foot out free standing unrested position!

I still prefere my Webley Alecto but then again it is about 5 times more expensive and so it should be a better gun :)

I will be following this up with a full review some time down the road...

Here are some specifications for the Crosman 13177 American Classic:

• .177 pellet
• 495 FPS
• Length: 13.63"
• Weight: 2 pounds
• Underlever pump action
• Single shot - Bolt
• Rifled barrel

Buy this gun in Canada   -   Buy this gun in the US

The Webley Alecto (AKA: Zoraki HP-01) may not fit in exactly as a "Replica" Airgun, although it does resemble a bloated Dessert Eagle! But it is an Airgun worthy of spending some time reviewing an this is now my third Vimeo Video review for the Webley Alecto. My first Video Review was a Table Top Review where I covered most of the Webley's basic operation. My second Vimeo Video was a Chronograph Test to see what my Webley Alecto could do performance wise for FPS.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I really wanted to do a video of this gun just shooting because that's what it does best, put lead down range very accurately! So I setup three cameras to capture it all from just about every angle I could think of and I set up 30 feet away from my target and shot 5 rounds in a rested position using a Red Dot Scope. The results where not surprising - pretty close to a 1/2 inch grouping!

If you're looking for a compact, hard hitting, accurate target or small pest control Air gun then look no further, the Webley Alecto has the goods!

Watch the full Multi-angle Vimeo Video of my Webley Alecto Shooting Test:

Buy this gun in Canada

Buy this gun in the US

OK to start things off, this is a review of the Daisy Red Ryder Lever action BB Rifle but the Vimeo Video also compares the Red Ryder to the very similar Crosman Marlin Cowboy Lever Action BB Riffle, If you have not checked my Marlin Cowboy review out, you can see it here.

So for the most part I am going to focus on the Red Ryder in this text version but I will refer to the Marlin Cowboy when comparing the two BB air rifles.

Type: BB spring air rifle.

Manufacturer: Daisy.

Model:Red Ryder.

Materials: Mostly metal and wood.

Weight: 2.2 pounds.

Barrel: Smooth bore.

Propulsion: Spring.

Action: Lever action.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 650 rounds.

FPS: Up-to 350.

Trigger Pull: The trigger pull is pretty good, not super light but predictable. (the trigger area is much larger then the Crosman Marlin Cowboy which may be more suitable for adults with thick fingers)

Accuracy: When I originally tested my Marline Cowboy I thought it performed well but the Daisy Red Ryder definitely has the advantage in the accuracy department, at least in my testing. I got about a 1.5 inch 8 shot group from a free standing position 20 feet away from the target.

Build Quality: This is a pretty much all metal and wood gun with a build quality almost exactly like the Crosman Marlin Cowboy. Daisy has even made some improvements like upgrading the lever to metal from plastic, most likely to compete with Crosman on this feature. The only plastic I found was the trigger, safety and front sight assembly.

Realism: Even though this BB gun is styled after the classic lever action Cowboy Rifle, it's not a close replica to any that I know of. You have to keep in mind the purpose of this gun - meant primarily for younger first time shooters. There are some nice touches like the leather tassels and the Red Ryder name burned into the stock .

Purchased From: Walmart.

Pros:

• Inexpensive introduction to the sport of Airgun shooting.

• Made out of Mostly Metal and Wood - Now including the Lever.

• Large capacity internal barrel magazine (650 rounds).

• Adjustable rear sight for height.

• Decent 300+ fps velocity.

• Excellent accuracy and consistency.

• The original maker of this style of BB rifle - great track record!

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Plastic trigger, safety and front sight assembly.

• Some people may find the non removable metal loop for the leather tassel a bit intrusive.

Comments:

I think this is a wonderful little BB rifle and even though it's intended for the young entry level shooter it can make a great back yard plinker that anyone can join in and enjoy - adults included! I plan to be shooting either the Red Ryder or my Marline Cowboy side by side with my little guy when he is old enough to shoot one of these fine lever action BB rifles. When it comes to picking between the Daisy Red Ryder or the Crosman Marlin Cowboy Lever Action BB Rifles it comes down to a few points: Both have almost the exact same build quality so it may come down to which look you like best? The Daisy was more accurate while the Crosman had a bit more power. The Red Ryder had the lighter but longer lever action pull while the Marlin Cowboy had a heavier shorter lever pull.

If you can't decide just buy them both because they are dirt cheap to buy and tons of fun to shoot, so when your friends come over you can always pass them one so they won't feel left out!

My Vimeo Video Comparison Review for these Lever Action BB Rifles:

Buy Air Rifles in Canada   -   Buy Marlin Cowboy in the US

Buy Red Ryder in Canada   -   Buy Red Ryder in the US

In my recent acquisition of guns from my friend, I also procured a customized Crosman 2240 .22 caliber CO2 bolt action air pistol. It came customized with a new RJ Machine bolt, longer barrel and wood grips.

All I need to add is a nice Red Dot or low powered pistol scope and this classic CO2 air pistol will make a really nice target shooter.

I purchased a bunch of "near new" air guns from a friend of mine last week who was't using them anymore and thought I could put them to better use. I was happy to oblige!

I already have the Crosman Quest 800 Break Barrel .22 caliber rifle for my pest control but you can always use one with more power! The break barrel Benjamin Sheridan Super Streak in .22 caliber is rated at up to 1000 fps and it is a real beast of an air gun to say the least. It came with a nice 4-16-40mm scope and I added an NCStar bi-pod to it to help distribute some of the weight.

I sighted it in at about 50 feet and was able to get about a nice 1 inch grouping with it from a rested position. I am looking forward to using this gun when my fruit trees start producing.

Buy Air Rifles in Canada

Buy Air Rifles in the US

I have been diversifying a bit with some new products for the Web-store, recently adding two diana break barrel rifles and now this Crosman 1077 Multi-pump Pellet Pistol in .177 caliber. My website is dedicated mainly to replicas but there is definitely a crossover into other styles of airguns, I know I appreciate and use them!

Here is the information on the Crosman 1377 Pump Action .177 caliber Pellet Pistol:

The Classic American Pump Pistol. The .177 caliber pneumatic air pistol features a single-action bolt design for easier cocking and loading, a rifled steel barrel for accuracy and an easy-pump forearm for variable pump power.  The Crosman 1377 features fully adjustable rear peep or open sights and a fixed blade front. The variable pump power lets you control the velocity for whatever shooting you are doing!

These units are new condition Refurbished models!

• .177 pellet
• 495 FPS
• Length: 13.63"
• Weight: 2 pounds
• Underlever pump action
• Single shot - Bolt
• Rifled barrel

Crosman 1377 .177 Caliber Pellet Pistol - Refurbished

C$59.00

The Diana 240 Classic is the second of the two Diana Break Barrel Pellet Rifles I just added to the Replica Airguns Store and it is also available in the 495 FPS non-PAL version. 

The Diana 240 Classic Break Barrel Pellet Rifle has a simplistic design, while incorporating top equipment and high precision parts which give this quality air rifle the characteristics of the new Diana product line. The Diana Classic 240 has the new straight classic wooden stock and will give you no end of 495 feet per second shooting fun and leisure-time.

• .177 & .22 caliber @ 495 FPS
• Barrel length: 16.5"
• Weight: 5.8 pounds
• Break barrel spring piston
• Total Length: 41"
• Wood stock

Buy this Air Rifle in Canada   -   Buy Air Rifles in the US

I just added a couple new name brand air rifles from Diana. The first one is the Diana Panther 21 Break Barrel Pellet Rifle in both .177 and .22 caliber versions. Both versions shoot up to 495 fps so they do not require a PAL for purchase.

The Diana Panther 21 Break Barrel Pellet Rifle is a low-cost introduction to the world of Diana air rifles. Diana's successful, youthful lightweight model inspires confidence with its modern design, precision and an extremely attractive price. Combining the power plant of the 240 Classic with the durable black synthetic stock will attract not only just younger shooters.

• .177 & .22 caliber @ 495 FPS
• Barrel length: 16.5"
• Weight: 5.8 pounds
• Break barrel spring piston
• Total Length: 41"
• Synthetic all weather stock

Buy this Air Rifle in Canada   -   Buy Air Rifles in the US

I want to say first off that I don't take any pleasure in killing animals, even the ones that invade my home and eat my crops, but unfortunately there are times when you have to do what you have to do and restore order.

I live on six acres of land and only really have a problem with two pests, and that would be Rats and Flying Rats, (otherwise known as Crows). The Rats get into my garbage and even into the house at times and chew and eat things that don't belong to them making a big mess. The Crows on the other hand eat the cherries and plums on my fruit trees and seem to take pleasure in killing the Blue Jays and Robbins that are trying to make a home on my farm.

I have purchased a dedicated .22 caliber Crosman Quest 800 pellet gun that is capable of 800 fps for the humane elimination of the Rats and Crows that are not welcome on my land. I use this Pellet Rifle most of the time to quickly and humanely dispose of the pests and vermin.

I recently purchased the Webley Alecto (Zoraki HP-01) in .22 Caliber and thought it would make a great compact pest control gun as it has good power and accuracy and is available in .22 caliber which puts more raw energy into the target. It is the time of year again when the young Crows that have not yet learned to stay away from my property start coming around and causing a nuisance, so I thought this would be as good a time as any to try out my Webley Alecto.

The target was a medium sized crow about 40 feet away. My Webley Alecto was sighted in and ready to go with 18 grain Beeman Crow Magnum hollow point pellets. I pumped it up to the max and took aim, the crow immediately went down and landed in my pool area. Unfortunately I winged him, I really mean it because his wing was obviously broken. I waited for him to settle down (there was nowhere for him to go in the fenced off area) and put one last round into him, again from at least 40 feet away. The second shot was a head shot and it was game over.

I was shooting a bit far out for open sights in this case but even so I put both shots into the Crow. Adding a low power Scope or even a Red Dot would make extended range shooting with the Webley Alecto a bit more precise. The Webley Alecto is definitely up for the job of taking care of the Pests and Vermin around your home or farm. My father is even going to pick up a Webley Alecto for his hunting trips to use as a grouse gun when he is out hunting larger game. The Webley Alecto is fully legal to carry in Canada (non-controlled firearm) and very compact.

Well hopefully I have not offended anyone? Just remember, this is a gun website and guns get used for many things, one of which is taking care of business - just as they where designed to do!

Buy this gun in Canada

Buy this gun in the US

This may not be a big deal to most of you but if you happen to own or are thinking about getting a Webley Alecto in either a .177 caliber or .22 caliber pellet version, and you are a left handed shooter... then having the appropriate grips is going to make life just a little easier for you!

If you haven't taken a look at the Webley Alecto, maybe you should because it is a pretty amazing Pellet Pistol for target or pest control.

Buy these grips in Canada   -   Buy these grips in the US

Related Posts:

• WEBLEY ALECTO .177 AND .22 CALIBER MULTI-STROKE PNEUMATIC TARGET PISTOL

• WEBLEY ALECTO - ZORAKI HP-01 .177 & .22 CALIBER PCP AIR PISTOL REVIEW

I have been wanting to do a Chrony test for my Webley Alecto as I didn't have a chronograph at the time of my original review. Today was the day I got around to it and I am really happy with the results I got. Mine came with the pressure release valve adjusted fairly conservatively. I imagine this is a generic setting that is set the same for both the .177 caliber and .22 caliber versions based on the lighter .177 caliber having a faster muzzle velocity and hittiing the 495 fps with less pressure required.

In the case of a .22 caliber pellet and it having approximately double the weight, the pressure release valve may be adjusted a bit on the light side, but I was only guessing and I wanted to make sure I didn't have an air pistol shooting over 500fps as this would make it a restricted firearm here in Canada and although I have my restricted firearms license, I didn't want to have this particular pistol governed by the rules and regulations of a restricted firearm.

So lets get to my results. I was using crosman premium 14.3 grain pellets for this test, far from the heaviest .22 caliber pellets you can get. I also tested my Webley Alecto out with one, two , three and even four pumps. Keep in mind pumping the Webley Alecto four times is not recommended by the factory and could cause long term damage to your Alecto. I did it with mine because I will ultimately get asked what an extra pump will give you in terms of extra fps. 

• One Pump: 270.9 fps

• Two Pumps: 390.5 fps

• Three Pumps: 449.8 fps

• Four Pumps: 487 fps & 496.3 fps

So as you can see, I did not go over 500 fps even with four pumps which is exactly where I wanted this pistol to be around. If you do decide to do the pressure release valve mod on your Webley Alecto, I would recommend you also test yours out on a chronograph just in case your results are different then mine, and keep in mind modifying the Webley Alecto could void your warrantee. The last thing you want to be carrying around is an illegal firearm!

Buy Webley Guns in Canada

Buy Webley Guns in the US

Related Posts:

• WEBLEY ALECTO .177 AND .22 CALIBER MULTI-STROKE PNEUMATIC TARGET PISTOL

• WEBLEY ALECTO PCP .22 CAL. AIR GUN CHRONY TEST

Type: Multi-pump Air Pistol.

Manufacturer: Webley - Zoraki ATAK Arms.

Model:Alecto -  HP-01

Materials: Polymer shell with metal internal parts.

Weight: 2.4 pounds.

Barrel: 7.2 inches, metal rifled.

Propulsion: MSP Multi-stroke pneumatic.

Action: Single shot.

Ammunition Type: .177 & .22 caliber pellets.

Ammunition Capacity: 1 pellet.

FPS: 495+.

Trigger Pull: You simply can not get a better trigger. You can adjust it left and right and forwards and backwards. You can also adjust the tension from .9 lbs to 4 lbs and the break point is smooth as butter.

Accuracy: Awesome, I got about a 1 inch group from a free standing position 20 feet away.

Build Quality: Build quality is excellent, it does have an external outer plastic shell but it is very solid and made of what seems to be high quality weapons grade polymer. All the internal mechanical parts are made out of metal.

Realism: This is not a replica air gun but it does resemble the Desert Eagle in shape and size.

Purchased From: the Replica Airguns Store.

Pros:

• Very accurate for a pistol.

• Only a few pumps generate a lot of power.

• Fully adjustable trigger and grips.

• Fully adjustable sites, including a rotating front site for quick adjust near and far shooting.

• Great safety design with one finger operation.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• If you're left handed you have to buy the extra left hand grip separately.

• Comes with the pressure release valve adjusted a bit too lean. (seems to let pressure out even with only two pumps)

• May be a bit to large for small handed shooters.

Comments:

I originally got this target air pistol mainly to test it out and do a review for the website, thinking I was going to send it back at the end. After playing around with it for a while, I have decided I simply can not part with it. The Webley Alecto is just to addictive to shoot and has such great power and accuracy that you kind of forget it's not an action shooter. you get lost in literally blasting away anything you point it at.

My table top Vimeo Video Review of the Webley Alecto Target Pistol:

Buy BB pistols in Canada

Buy BB pistols in the US

Related Posts:

• WEBLEY ALECTO - ZORAKI HP-01 .177 & .22 CALIBER PCP AIR PISTOL REVIEW
• WEBLEY ALECTO PCP .22 CAL. AIR GUN CHRONY TEST

The Webley Alecto isn't exactly a "Replica Airgun" but it's really addictive to shoot and OK maybe it looks just a bit like the Desert Eagle? Unlike most BB guns, the Webley Alecto is all about accuracy and consistency. I found myself shooting at all kinds of targets just to see if I could hit them and this gun is simply amazing. It is essentially a PCP compressed air gun that has a three stage pump, you can pump it up to three times to get the maximum feet per second.

I found the one I have (Canadian Version with detuned pressure release valve) had little to no fps gain pumping it the third time because to be imported into Canada it must shoot under 500 fps. The valve can be adjusted internally but you risk higher then 500 fps shots which would make it a Restricted Controlled Firearm in Canada.

One of the most amazing attributes about this compressed air gun is the trigger, it's fully adjustable and smooth as butter. Another nice attention to detail is the included hard shell case and factory quality control test target.

The gun is made in Turkey for Webley by Zoraki and is the HP-01. Unlike the Zoraki version (.177 cal. only), with the Webley Alecto, you have the choice of either a .177 or .22 caliber. I went for the .22 caliber model and mine will for sure get a Red Dot Scope mounted on it one of these days :)

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

"Before you attempt to do this modification you need to be aware that it may void your warrantee and/or you may fail and either break something or incorrectly reassemble your Mini UZI rendering it "Broked"! This is your problem so please do not attempt this modification (even though it is fairly easy to do) unless you're 100% confident you can do it and are aware of the possible consequences. Make sure to also take into account any gun laws in your area prohibiting full-auto capable firearms!"

(Special thanks to Herman for showing me the ropes on this modification)

This modification will make your semi-auto "only" Cybergun/KWC Mini UZI BB Gun into a full auto capable 4.5mm BB machine gun. From the factory the full auto switch position (Far Left "A") is disabled but the full auto selector position is visible. The actual full-auto functionality is still present in the Mini UZI but has been decommissioned by the simple means of blocking the selector switch from being moved to the far left full-auto or "A" position.

This full auto modification will show you how to disassemble the Cybergun - KWC Mini UZI BB Gun and remove the small plastic selector switch blockage so you will be able to manually switch between semi auto and full auto modes. This modification takes about 15 minutes to complete.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

You will need the following tools: A pair of pliers and either a pair of small wire cutters or a file.

Let's begin! Below are the two pre-modification positions available from the factory:

"S - SAFE"

"R - SEMI AUTO"

Below is a closeup of the top bolt cover that we will be removing to access the internal bolt for removal:

In the next photo we have removed the bolt cover by pressing the "angled button" towards the rear sight:

And now the bolt is removed:

I removed the grips but this is not necessary:

Now you will need to remove the lower receiver pin located at the back end of the receiver closest to the grip safety. Use a pair of pliers to pinch the metal pin while pushing it through. Once the pin is started you can use the pliers on the other side to pull the pin all the way out. You may need to us a fair amount of force to do this as the fit of the pin is tight:

Once the pin is removed the lower receiver can be detached:

You can see in the picture below the small plastic nub that we will need to remove in order to restore full-auto capability:

I used a pair of small wire cutters to clip this plastic nub off, but you could use a file too. Just make sure that the plastic is flush and does not have any burs or protrusions.

Below is a photo of the Plastic Nub removed from another angle:

After that, all you need to do is reassemble you Mini UZI in revers order to finnish the Full Auto modification.

In the below Photos you can see we have restored the ability to move the fire selector switch over to the "Far Left" or "A" position, reenabling the Cybergun - KWC Mini UZI BB Gun to shoot in full auto when desired.

"A - FULL AUTO"

Now enjoy your Cybergun - KWC Mini UZI BB Gun in full-auto as it was originally designed!

Here is my Vimeo Video in Narrative with Photos:

Buy this gun in Canada

Buy this gun in the US

This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US