In this Field Test Shooting Video I put the Crosman MK45 CO2 NBB BB Pistol through my typical shooting test to see how it performs in a real world shooting condition. I first test out the velocity by placing 5 shots though my Chronograph and averaging them out and then I move on to my accuracy test where I place 10 shots on a pepper target setup 30 feet away. If you are more interested in details and specifications then make sure to watch my Table Top Video Review for the Crosman MK45 CO2 NBB BB Pistol.
As promised I first test the velocity in fps by using a brand new 12 gram CO2 in the Crosman MK45 CO2 NBB BB Pistol using 5.1 grain 4.5mm steel BB’s. The temperature was around 20C/69F so about average room temperature. My fastest shot out of the Crosman MK45 was 424 with the slowest shot hitting 406 so pretty consistent. This gave me a 418 average fps which is a bit under the claimed 480 fps Crosman states. Still more than acceptable for plinking at cans and other unsuspecting objects 30 feet or more away.
Next I made sure I had 10 rounds loaded in the Crosman MK45 CO2 NBB BB Pistol’s 20 rounds stick magazine and set myself up 30 feet away from a fresh pepper target. I generally use a seated shooting position with my hands rested on a sandbag up front and seated on a stool like chair in the back. I did get a couple flyers but I would say the Crosman MK45 is more than capable of getting all 10 shots within a 1.5 to 2 inch grouping. The stragglers this time around stretched it out to more like 3 inches so still not bad. The sights on most of these lower cost CO2 BB pistols are generally fixed and the Crosman MK45 CO2 NBB BB Pistol is no exception so it is a good thing it shot really close to the bullseye out of the box.
All in all the Crosman MK45 CO2 NBB BB Pistol performed as expected and was able to get a velocity in the lower 400 fps ranges along with around a 2 inch 10 shot grouping at 30 feet. As I mentioned in my Table Top Video Review for the Crosman MK45 I do like the two tone color scheme and the fiber otic front and rear sights make aiming at targets on various backgrounds supper easy. There are a ton of options when it comes to these lower cosy mostly plastic NBB CO2 BB Pistols so take some time and go over are large selection over at the Replace Airguns Online Canada and US Store. I you want to grab yourself a Crosman MK45 CO2 NBB BB Pistol today I have put links to buy in both Canada and the US below.
If you are looking for a proper shooting video view for the Barra 380 NBB CO2 BB Pistol that get’s right to the meat and potatoes without any time waisting fluff, then you came to the right place. In this video I test out the actual real world velocity and accuracy of the Barra 380 in the Replace Airguns in door Sea Can Airgun Shooting Range. If you are more interested in details and specifications or perhaps some close up video of the Barra 380 NBB CO2 BB Pistol then checkout my Table Top Video Review here.
So let’s get right to it! For my Chronograph Test I put a brand new 12 gram CO2 into the Berra 380, I made sure everything was about room temperature 20C - 69F (Gun, CO2 and shooting area), and then proceed to shoot 5 rounds through my Chronograph. I was able to average 407 fps which is damn close to Berra’s claim of 410 fps so this first test was a pass!
For my Accuracy Test I used my standard 30 foot paper target setup where I sit on a stool in the back with my hands rested on a sand bag up front. This allows for pretty stable shooting with less human factor than an unrested shooting position. It is not perfect but gives us an idea of the potential of the Barra 380 NBB CO2 BB Pistol. I proceeded to shoot 10 rounds into a fresh pepper target and got what I would say was a 2 inch grouping again from 30 feet away. There are no sight adjustment on the Barra 380 so I was hoping my grouping would be close to the bullseye and it was. Just a bit high but fairly well centered left and right. If you are aiming at a pop can 30 feet away you would most lily hit it every time near the top of the can if you placed your aim point at the bottom of the can (Just a Tip).
So how did the Barra 380 NBB CO2 BB Pistol do? Pretty good and kind of as expeceted. I have shot a bunch of these CO2, NBB, DAO Trigger, Stick Magazine, BB Pistols that have the exact same mechanic internal attributes but with a different skin on the outside. And they generally do a good job of compromising between price, function, power, CO2 efficiency, accuracy, realism and fun factor. If you like more of a Beretta look then perhaps the Barra 380 NBB CO2 BB Pistol is the right choice in one of these fairly basic NBB CO2 BB Pistols but take a look around the Replica Airguns store and see what else may catch your eye.
On with the show… First I shot five rounds through my Chronograph using a brand new CO2 in what I would consider to be room temperaterer (20C or 70F). Sig Sauer claims their MCX Rattler shoots around 325 fps and in my testing I got a five shot average of 318 with my slowest shot hitting 298 and my fastest shot hitting 346. So I would say Sig is right on the mark here.
I then setup a fresh pepper target 30 feet away and loaded up a full magazine (30 rounds) for my accuracy test where I first shot in 10 rounds in semi auto and then the remaining 20 rounds in three round burst. I would say I was able to get around a 2 inch grouping in semi auto but I did have to shoot aiming on the bottom of the rings and I was using the flattened sights rather than the pop up sights as you have two options with the Sig Sauer MCX Rattler CO2 BB Rifle. Once I switched the selector to three round burst, my grouping really did not change all that much, maybe 3 inches at most and that was with 20 rounds.
The Sig Sauer MCX Rattler CO2 BB Rifle is a lot of fun, it is by far not the most powerful blowback full auto-ish Blowback BB Rifle out there but it performs decent and looks really good. The internal blowback action does give you a slight tapping feel and it does allow for a true single action trigger. If you want a rather compact Blowback BB Rifle with Sig licensing and branding along with Sig quality then take a look at the Sig Sauer MCX Rattler CO2 BB Rifle. Did I mention it was really affordable too?
Type: Non-blowback CO2 BB Pistol. Manufacturer: Distributed by Bear River. Model: Bear River BR45. Materials: Mostly plastic. Weight: 1 pounds (454 grams). TotalLength: 8 inches (203mm). Barrel: 4.72 inches (120mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto non-blowback, DOA trigger. AmmunitionType: .4.5mm steel BB’s. AmmunitionCapacity: 20 round drop out metal stick magazine. FPS: Claimed 410.
Trigger Pull: The Bear River BR45 NBB CO2 BB Pistol has a double action trigger commonly found on lower cost NBB CO2 BB Pistols with a long trigger pull that requires more length and effort to pull, but I would say is still usable for action shooting. Your finger will get worked a bit after several magazines of action shooting. The Bear River BR45 trigger pull makes the internal metal barrel move forward and out of the front of the barrel opening but as it has a recessed barrel you don’t really see it protruding out of the front. When you reach the release point the barrel snaps back into the BB Pistol acting like the hammer and releasing CO2 and shooting a BB.
Accuracy: I have not shoot the Bear River BR45 NBB CO2 BB Pistol yet or performed my standard Field Test Shooting Video, so I can not comment at this time on the actual performance other than what is claimed in terms of fps (410fps). I have shot several similar CO2 BB Pistols which share almost the exact same internal components but have a different external skin on them. One bonus is that all this style of metal stick magazines are the same so they will be interchangeable. My previous experiences with similar BB Pistols is that they will get mid 400fps velocities and in general will shot around a 2 inch grouping or so. It is hard to say how close the Bear River BR45 is going to shoot to the bullseye, as out of the box it may shoot a bit high or low or left or right. We will find out during my shooting test.
Build Quality: The Bear River BR45 NBB CO2 BB Pistol is an almost all plastic moulded Airgun with only a few metal parts I can pick out. The trigger and magazine are metal along with the inner barrel and the area where the CO2 goes in. Because of the plastic build, it is rather light weight at around 1 pound which can actually be good if you were to drop it on a hard surface as the mass is low resulting in less damage. Scratches will also be less noticeable on an all plastic exterior Airgun over a metal Airgun as the material on a plastic Airgun is going to have the color throughout the material rather than a painted surface that will show blemishes a lot more. The simplicity of the design means you should get a lot of use from the Bear River BR45 before encountering any issues.
Realism: The Bear River BR45 NBB CO2 BB Pistol is not a replica of an exact real steel gun in production but it does take after a Sig Sauer or H&K looking at the basic shape and features. There are few external mechanical working parts on the Bear River BR45 other than the trigger, safety, magazine and inner barrel. The barrel is well recessed and the CO2 tab is sunken in the grip which helps in terms of it looking more realistic.
Pros:
Nice size BB pistol, feels good in the hand.
Decent FPS rating of 410.
Picatinny rail on frame for adding on accessories.
Non-blowback should get lots of shots per CO2.
Easy to see white dot sights front and back.
CO2 tab is recessed and somewhat hidden under the grip.
Double action trigger pull is long but not too firm.
Uses a generic all metal stick magazines commonly found in lower cost BB pistols.
Recessed barrel looks that part.
Simple design with not a lot of moving parts will make it reliable for a long time.
Cons:
All plastic gun for the most part.
Not many working parts, pretty much all moulded gun.
CO2 tab a bit hard to use for people with bigger fingers.
Comments:
The Bear River BR45 NBB CO2 BB Pistol is a basic mostly all plastic NBB CO2 BB Pistol very simple in design which makes it dependable and reliable as there is a lot less to go wrong as compared to a blowback metal BB Pistol with lots of moving parts. Also keep in mind the metal in Airguns is not as hard or strong as you find in a Real Steel Pistol so all of these moving metal parts will wear over time and some may eventually fail. Other advantages of a NBB CO2 BB Pistol are that it will have a decent velocity rating and it will also get more shots per CO2 as compared to blowback Air Pistols, so not only is the initial cost of a simple NBB Air Pistol going to be less but also you will not need as much CO2 to operate it. I do like the size of the Bear River BR45 NBB CO2 BB Pistol as it is a bit larger than similar NBB Replica Air Pistols which for me and my larger hands is a good thing.
Type: Non-blowback CO2 BB Pistol. Manufacturer: Distributed by Barra. Model: Barra 380. Materials: Mostly plastic. Weight: .93 pounds (422 grams). TotalLength: 6.89inches (175mm). Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto non-blowback, DOA trigger. AmmunitionType: .4.5mm steel BB’s. AmmunitionCapacity: 20 round drop out metal stick magazine. FPS: Claimed 410.
TriggerPull: The Barra 380 NBB CO2 BB Pistol has a typical double action trigger with a longer trigger pull that requires more length and effort to pull, but I would say is still usable as an action shooter. Your finger will get a bit tired after several magazines of action shooting. The Barra 380 trigger pull makes the internal metal barrel move forward and out of the front of the barrel opening enough to see it clearly, then when you reach the release point it snaps back into the BB Pistol acting like the hammer and releasing CO2 and shooting a BB.
Accuracy: I have yet to shoot the Barra 380 NBB CO2 BB Pistol or even performed my standard Field Test Shooting Video as of yet, so I can not comment at this time on the actual performance other than what is claimed in terms of fps - 410fps by the way. I have shot several similar CO2 BB Pistols which share almost the exact same internal components but have a different external skin on them. One benefit is that all this style of metal stick magazines are the same so they will be interchangeable. My previous experiences with similar BB Pistols is that they will get mid 400fps velocities and in general will shot around a 2 inch grouping or so. It is hard to say how close theBarra 380 NBB CO2 BB Pistol is going to shoot to the bullseye, as out of the box it may shoot a bit high or low or left or right. We will find out during my shooting test.
BuildQuality: The Barra 380 NBB CO2 BB Pistol is a pretty much almost all plastic Airgun with only a few metal parts I can see on it. The trigger is metal along with the inner barrel and the area where the CO2 goes in. Because of the plastic build, it is rather light weight which can actually be good if you where to drop it on a hard surface as the mass is low resulting in less damage. Scratches will also be less noticeable on a plastic Airgun over a metal Airgun as the material on a plastic Airgun is all tan/black throughout the material rather than a painted surface that will show blemishes a lot more. The simplicity of the design means you should get a lot of use from the Barra 380 before encountering any issues.
Realism: The Barra 380 NBB CO2 BB Pistol is not a replica of an exact real steel gun in production but it does take after a compact Beretta when you look at the open barrel and similar trigger guard. There are few external mechanical working parts on the Barra 380 CO2 NBB BB Pistol other than the trigger, safety, magazine and inner barrel. The barrel is slightly recessed and the CO2 tab is hidden in the grip which helps in terms of it looking the part.
Pros:
Nice compact size BB pistol easy to transport.
Decent FPS rating of 410.
Should get lots of shots per CO2 as it is non-blowback
Picatinny rail on frame for adding accessories.
Does have a white dot sight up front.
Finger groves on pistol grips for a secure grip.
CO2 tab is well hidden within the grip.
Double action trigger pull is long but not too firm.
Uses a generic all metal stick magazines commonly found on lower cost BB pistols.
Simple design with not a lot of moving parts will make it reliable for a long time.
Cons:
All plastic gun for the most part.
Not many working parts, pretty much all moulded gun.
Grip can pop of kind of easy if you pull a bit hard.
Sights are non adjustable and no white dots on the rear sight.
Comments:
I often mention how I prefer blowback Airguns that have a more solid weight and feel to them with more working parts, but again there is a lot more that can go wrong and complex parts wear out over usage a lot quicker than a more simple design as in the the case of the Barra 380 NBB CO2 BB Pistol. Price is also going to be a lot less when looking a more simplified Air Pistol like the Barra 380, as the plastic build is a lot cheaper to produce over more expensive metals. Another bonus with non-blowback CO2 airguns is that they do tend to have a higher velocity with more shots per CO2 than a similar CO2 Blowback Pistol, so less expensive to shoot over time. It really depends what you are really looking for? A couple other strong points to mention about the Barra 380 NBB CO2 BB Pistol would be the compatibility with other similar styled CO2 BB pistol metal stick magazines and if you like the look of a Beretta then you may also like the look of the Barra 380.
Type: Non-blowback CO2 BB Pistol. Manufacturer: Distributed by Crosman. Model: MK45. Materials: Mostly plastic. Weight: .63 pounds (281 grams). Total Length: 7.25 inches (184mm). Barrel: 4.5 inches (114mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto non-blowback, DOA trigger. AmmunitionType: .4.5mm steel BB’s. AmmunitionCapacity: 20 round drop out metal stick magazine. FPS: Claimed 480.
Trigger Pull: The Crosman MK45 CO2 NBB BB Pistol has a typical double action tiger with a longer trigger pull that requires more length and effort to pull, but I would say is still usable as an action shooter. The Crosman MK45 trigger pull makes the internal metal barrel move forward and out of the front of the barrel opening a bit, then when you reach the release point it snaps back into the BB Pistol acting like the hammer and releasing CO2.
Accuracy: I have yet to shoot the Crosman MK45 CO2 NBB BB Pistol or performed my standard Field Test Shooting Video, so I can not comment at this time on the actual performance other than what is claimed in terms of fps. I have shot several similar CO2 BB Pistols which share almost the exact same internal components but have a different external skin on them. The good news is the metal stick magazines for all of these type NBB CO2 BB Pistols are the same so they will be interchangeable. My previous experiences with similar BB Pistols is that they will get mid 400fps velocities and in general will shot around a 2 inch grouping or so. It is hard to say how close the Crosman MK45 CO2 NBB BB Pistol is going to shoot to the bullseye, as out of the box it may shoot a bit high or low or left or right. We will find out during my shooting test.
Build Quality: The Crosman MK45 CO2 NBB BB Pistol is a pretty much an all plastic Airgun with only a few metal parts I can find on it. The trigger is metal along with the inner barrel and the area where the CO2 goes in. Because of the plastic build, it is rather light weight which can actually be good in a fall as the mass is low resulting in less damage if you were to drop it on a hard surface. Scratches will also be less noticeable on a plastic Airgun over a metal Airgun as the material on a plastic Airgun is all tan/black rather than a painted surface that will show blemishes a lot more. The simplicity of the design means you should get a lot of use from the Crosman MK45 CO2 NBB BB Pistol before encountering any issues.
Realism: The Crosman MK45 CO2 NBB BB Pistol is not a replica of an exact real steel gun in production but it does share a lot of cosmetic characteristics as what you would see on a Sig Sauer or even H&K Pistol. The magazine release on the Crosman MK45 looks and works a lot like what you will find on an H&K Pistol. There are few external mechanical working parts on the Crosman MK45 CO2 NBB BB Pistol other than the trigger, safety and inner barrel. The barrel is slightly recessed and the CO2 tab is hidden in the grip which helps in terms of believability.
Pros:
Desert tan with black grips looks really good in my opinion.
High FPS rating of 480.
Picatinny rail on frame for adding on accessories.
Non-blowback should get lots of shots per CO2.
Easy to see fiber optic sights front and back.
CO2 tab is nicely hidden inside the grip.
Double action trigger pull is long but not too firm.
Uses a generic all metal stick magazines commonly found on lower cost BB pistols.
Ambidextrous magazine release.
Simple design with not a lot of moving parts will make it reliable for a long time.
Cons:
All moulded plastic BB gun for the most part.
Not many working parts, it’s pretty much an all plastic BB gun.
Grips are fairly loose, they don't really snap into place.
Sights are not adjustable.
Comments:
I personally prefer blowback Airguns that have a more solid weight and feel to them with more working parts, but again there is a lot more that can go wrong and parts tend to complex parts wear out over usage a lot quicker than a more simple design like in the case of the Crosman MK45 CO2 NBB BB Pistol. Price is also going to be a lot less when looking a more simplified Air Pistol like the Crosman MK45, as the plastic build is a lot cheaper to produce. Another bonus with non-blowback CO2 airguns is that they do tend to have a much higher velocity and also generally you will also get more shots per CO2 than a similar CO2 Blowback Pistol. It really depends what features you want more and in this case you also get a more cost effective Air Pistol with plenty of shooting enjoyment. A couple other strong points to mention about the Crosman MK45 CO2 NBB BB Pistol would be the fiber optic sights front and back and its sharp l looking two tone layout.
Type: BB Rifle. Manufacturer: Sig Sauer ASP Model: Sig Sauer MCX Rattler Materials: Metal and Nylon Fiber build. Weight: 4.6 Pounds (2.1 kg). Barrel: 7 inch (17.8 cm) steel non-rifled. Propulsion: Single 12 gram CO2. Action: Semi auto and 3 round burst with internal blowback (single action only trigger). AmmunitionType: 4.5mm Steel BB’s. AmmunitionCapacity: 30 rounds spring fed. Velocity: Claimed of 325 fps.
TriggerPull: The trigger pull on the Sig Sauer MCX Rattler CO2 BB Rifle is a single action only trigger that requires initial activation of the charging handle, after the first shot the internal blowback action will do this automatically for each followup shot. The single action only trigger is fairly short with a light pull and predictable release, great for action shooting. You also have the option of shooting in true semi auto (one trigger pull and one shot) or selecting 3 round burst mode which allows for one pull of the trigger with 3 rounds in full auto.
Accuracy: I really don’t have much feedback to give here as I have only shot a single magazine so far with the Sig Sauer MCX Rattler CO2 BB Rifle in a very uncontrolled format as I was not so much testing it out but rather just having some initial fun to see what it was all about. I will of course be following up this Table Top Review with a Field Test Review shortly to find out what the actual velocity is and see how accurate it is in both semi auto and 3 round burst mode.
BuildQuality: The build quality for the Sig Sauer MCX Rattler CO2 BB Rifle is really good considering it is mostly all plastic on the outside. It does feel solid and well built when holding it in the hand. From what I can tell the metal parts would include the barrel, the charging handle, the main controls and also much of the internal components inside both the rifle and the magazine. I would have liked to have seen a metal flash hider and perhaps the pop-up Iron sights could have also been metal.
Realism: The Sig Sauer MCX Rattler CO2 BB Rifle is a 1 to 1 scale very realistic Replica of the real steel Sig Sauer Rattler normally chambered in 5.56 NATO. It would have been nice if the dust cover opened up when charging the Airgun for realism but most of the other controls work as expected, like the charging handle, selector switch, magazine release and I am not sure but maybe even the bolt release, I will know more when I make my Field Test Shooting video for the Sig Sauer MCX Rattler.
Pros:
Perfect size and weight for a fun BB semi / full auto shooter.
Fully adjustable pop up sights that are usable in both the down and up position,
Lots of accessory mounting options with the picatinny top rail and MLOCK in the sides and bottom.
Folding rear stock allows for a compact size and much easier transportation.
Ambidextrous selector switch.
Can shoot in both semi and 3 round burst modes.
Very solid AR15 type magazine that holds the 30 4.5mm steel BB’s and the single 12 gram CO2.
Reasonably priced at around $250 at the time of this video.
Sig Sauer licensing.
Cons:
Only uses a single CO2, two would have been better in a fast action shooter like this to maintain fps.
325 fps seems a bit low.
Lots of plastic but build quality does feel good.
Comments:
The Sig Sig Sauer MCX Rattler CO2 BB Rifle reminds me a lot of the Umarex Steel Storm and Steel Force which are both Compact AR type Semi and Burt mode 4.5mm CO2 Blowback Airguns. Where the Sig Sauer MCX Rattler CO2 BB Rifle shines, is in the quality and realism as compared the Umarex counterparts. I do like that both the Umarex Steel Storm and Steel Force use dual 12 gram CO2 cartridges which I feel allows them to have more consistent velocity and performance as compared to the single CO2 in the Sig Sauer MCX Rattler CO2 BB Rifle. My First impressions without really testing the Sig Sauer MCX Rattler are all pretty positive but it will really come down to how well it performs and so I will put my recommendations on hold until I actually test it out!
My Table Top Review of the Sig Sauer MCX Rattler CO2 BB Rifle:
Type: GBB Airsoft Pistol. Manufacturer: Made by EMG. Model: TTI JW4 2011 Pit Viper. Materials: Aluminum & polymer components. Weight: 2.26 pounds (1025 grams). Length: 8.5 inches (2167mm). Propulsion: CO2/Green gas. Action: Semi auto blowback, single action only trigger. AmmunitionType: 6mm plastic Airsoft BB's. AmmunitionCapacity: 28-30 round drop out full size metal magazine. FPS: Claimed 370-390.
Trigger Pull: The single action only trigger pull on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, similar to the EMG TTI JW3 Combat Master.
Accuracy: At this point I have not shot the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will have to wait till I perform my Field Test Shooting Video coming up shortly. I do however expect it to perform very close to the EMG TTI STI 2011 Combat Master I already made a Field test Video Review for so you can check that on out in the mean time…
BuildQuality: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is for the most part an all metal gun with a CNC Machined Aluminum Slide and aluminum barrel along with mostly metal parts throughout including much of the frame. Parts of the frame are polymer including the grip area and trigger guard. The fit and finish is awesome on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol with attention to detail everywhere.
Realism: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is based off of the Pit Viper TTI, a replica of the John Wick pistol used in the John Wick 4 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped allowing for quick and easy hop-up adjustments.
Pros:
Super crisp, light and short SAO trigger.
Fit and finish is excellent, very little slide wiggle.
extremely close replica of the Pit Viper 2011 pistol used in the John Wick 4 movie.
Rear sight is fully adjustable and sits very flush with the slide.
Fiber optic front sight helps with quick targets acquisition.
CNC machined Aluminum slide and barrel with polymer frame.
Flared magwell for easy quick magazine reloading.
Full size high capacity 30 round double stack metal magazine.
Ambidextrous thumb safeties.
Working grip safety as you would expect on a 1911 based gun.
Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.
Nice snappy and fast blowback action, great for action shooting.
Licensing all over this gun true to the real steel version.
Cons:
Comes with the red tip but can be remove pretty easily.
Getting magazine but plate off is a bit tuff.
No white dot’s or fiber optics in the rear sight.
Comments:
The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is another great Replica of a John Wick pistol and has a less squared and smaller stature than the EMG Combat Master and a smoother overall look to it. What’s nice is that the magazines are interchangeable between the EMG TTI JW3 and JW4 versions so if you already have one then you will get additional magazine options, perhaps one in Green Gas and one in CO2. I like the slightly bulkier feel to the Combat Master but the Pit Viper is also a decent size, but again slightly more compact and less edges to get caught on your surroundings. Either way, both are awesome options if you are John Wick fan.
I love making these Mystery Box Unboxing Videos as many of the items inside are actually real mysteries to me, some I may have an idea of but even these items are new to me so it’s fun to open them up and check them all out. In this October 2023 Mystery Box Video I checkout 9 items ranging from AEG Airsoft Rifles to Airsoft , BB and Pellet Pistols. There is even a new Steel BB product from Sig Sauer that is a compact rifle with a 3 round burst option when shooting.
I don’t get to test out Bolt Action Airsoft Sniper type Rifles all that often but I do enjoy them for sure. I would like to test out the S&T Matrix KAR98K Bolt Action Airsoft Rifle using longer ranges than I can here in the Replica Airguns Indoor Sea Can Shooting Range but hopefully this Filed Test Review gives you an idea of what this Spring powered Bolt Action Airsoft Rifle can do. Make sure to watch my Table Top Review for the S&T Matrix KAR98K Bolt Action Airsoft Rifle for details, specifications and closer up video. In this video I mainly test out the velocity and accuracy at 30 feet away to see what the actual fps is and how tight of a 10 shot grouping I can get on a paper target.
Starting with the velocity test, I generally put 5 rounds through my Chronograph and then average them out for a real world rating. In this test I used standard .20 gram Airsoft BB’s for both the velocity and accuracy components of the video. I was very impressed with the consistency of the velocity with the slowest shot hitting 362 fps and the fastest shot hitting 363 fps averaging 362.5 fps and only having a 1 fps maximum difference between all shots. Pretty good right? Consistent velocity is very important for any sniper type rifle as if there is a large spread in velocity this can reduce elevation accuracy down range.
In terms of accuracy I was again very impressed with my results. For my target test I setup a fresh paper target 30 feet away and proceeded to shoot 10 rounds into it. I did have to reset for each shot as I had to manually work the bolt after each shot, this can affect accuracy but it did not seem to all that much. I was using a seated position in the back with my hands rested on a sand bag up front which does hep settle things down. Even with having to reset between each shot, I still managed to get close to a 1 inch 10 shot grouping, one shot did shoot just a bit high but that was probably me pulling it a bit. Out of the box with no sight adjustments the S&T Matrix KAR98K Bolt Action Airsoft Rifle shot almost dead center in the bullseye, it is fairly easy to adjust the elevation using the rear sight but there is no easy way to adjust for windage using the built in iron sights.
I know this is a Field Test Shooting Video and so it’s not really all about build or quality. That said I do love the quality and attention to detail the S&T Matrix KAR98K Bolt Action Airsoft Rifle has and the fact that it performs really well too is a big bonus. One last point I did not even mention in the Field Test Video is that Was able to load a lot more than 11 rounds into the magazine. I stoped at 19 as the spring was getting on the tight side, but may have been able to load more? If you’re looking for a sniper rifle with a history and that will stand out in a game then take a look at the S&T Matrix KAR98K Bolt Action Airsoft Rifle as an option.
In this Field Test Shooting Review Video I test out the Bear River Black Ops SR4 CQ AEG Airsoft Rifle (which I would consider to be a midrange AEG Airsoft Rifle) to see how it performs in the Replica Airguns Sea Can Indoor Shooting Range. As always this test is to see what the real world velocity is using .20 gram Airsoft BB’s and I also shoot 10 rounds in semi auto and then essentially a mag dump in full auto to see what kind of accuracy I can get from 30 feet away shooting in both shooting modes. If you want more info on details and specifications along with some closer up video of the Bear River Black Ops SR4 CQ AEG Airsoft Rifle then watch my Table Top Video Review here.
Starting with the velocity or fps portion of my review, my 5 shot average produced 320 fps that was very consistent shot to shot. My lowest velocity was 319 while my highest velocity was 322 so not a big spread at all. This may seem a bit low but keep in mind it is a CQ (Close Quarters) Compact AEG Rifle purpose built for that situation, It is not really made for outdoor shooting where longer range shooting may be required.
For my Accuracy test, I placed a paper target 30 feet down range and actually ended up having to make this portion of my Test Video twice as two of my cameras did not cooperate with me and I do like to get multiple camera angels to make the videos a bit more interesting. For my second test I was able to get around a 1 inch group shooting 10 shots in semi auto. I did find the Bear River Black Ops SR4 CQ AEG Airsoft Rifle shot rather high so I had to place my aim point at the bottom of the rings on the papper target. This resulted in mid point shots but it did shoot a bit to the right. I would invest in either a red dot or perhaps some more adjustable iron sights for this Airsfot Rifle. As always I was shooting using a semi rested position sitting on a stool in the back rested on a sand bag up front. When I switched the sector to smile mode (Full Auto) I essentially did a mag dump of my remaining 50-60 rounds resulting in the grouping opening up to around 3 inches but this is expected with all those rounds being added to the grouping. Recoil was not really a factor as AEG Rifles don’t really move around all that much.
Overal the Bear River Black Ops SR4 CQ AEG Airsoft Rifle performed well for me in this Field Test Review. the FPS may seem a bit low but at close range it is more than enough and you don’t have to worry about hurting anyone so you can keep your mind on the game at hand. Accuracy was also in line with a mid range AEG Airsoft Rifle, perhaps even a bit better than most. The Bear River Black Ops SR4 CQ AEG Airsoft Rifle does come with a basic battery and charger but along with a better sighting system I would also invest in upgraded batters and charger to really complete this purchase. With the quad rail setup you can really make this AR Airsoft AEG your own in terms of customization, all that can be added at any time.
Type: Airsoft Rifle. Manufacturer: Bear River. Model: Black Ops SR4 CQ Materials: Mostly Metal. Weight: 6.2 pounds (2.8 kilograms). Length: 24-27.5 inches (610-699mm) BarrelLength: 7.8 inches (198mm) inner 6.06mm non-rifled. Propulsion: AEG. Action: Semi & Full Auto SAO. AmmunitionType: 6mm Airsoft BB's. AmmunitionCapacity: Mid Cap 300 rounds. FPS: 370 using .20 gram Airsoft BB’s.
TriggerPull: The trigger pull on the Bear River Black Ops SR4 CQ AEG Airsoft Rifle like pretty much every other AEG Airsoft Rifle I have reviewed is a SAO with a light and short trigger, typical of most AEG Airsoft guns having basically a trigger that is an electrical on/off switch. The trigger pressure I would say is about medium for this type of trigger and about a 1/4 inch in length. It has a curved metal trigger and works as expected.
Accuracy: I have not Field Test Reviewed the Bear River Black Ops SR4 CQ AEG Airsoft Rifle so far but I can only hope it performs as well as the Bear River Black Ops SR4 CQ AEG Airsoft Rifle I reviewed already as it really surprised me for such a low cost entry level AEG Airsoft Rifle. Bear River claims around a 370fps using .20 gram Airsoft BB’s but they do recommend using .25 gram or heavier Plastic BB’s. We will find out when I do my actual Field Test Shooting Video for it. Similar with accuracy, we will have to wait till my shooting video to know how the Bear River Black Ops SR4 CQ AEG Airsoft Rifle performs on a paper target in the Replica Airguns Indoor Sea Can Shooting range.
Build Quality: Build quality for the Bear River Black Ops SR4 CQ AEG Airsoft Rifle is exceptional with nearly the entire Airsoft Rifle made out of some sort of metal including the receiver, hadn't guard, buffer tube, barrel, sights, trigger, charging handle, sights and all of the controls. Internally you will find a full metal Gen. 3 gearbox from SRC with with 8 mm metal bearing bushings, metal spring guide, upgraded metal piston head, cylinder, and cylinder head, and pre-shimmed all steel gears. The Hop-up is also metal and Bear River has installed a high torque long axle motor from SRC along with a metal hop-up.
Realism: The Bear River Black Ops SR4 CQ AEG Airsoft Rifle like so many other AEG AR type Airsoft Rifles is super realistic, with the Black Ops SR4 CQ it takes it to the next level with so much equality and metal everywhere. Because of this it is fairly heavy for such a compact AR Rilfe coming in at over 6 pounds which does make it feel super solid to hold.
Pros:
Super compact CQ style AR.
Comes with charger and 9.6 volt Ni-MH battery to get you started.
Lots of mounting points for accessories.
Iron sights have 4 aperture option peep sight options.
6 position rear stock for different shoulder pull lengths.
Adjustable metal hop-up under dust cover.
Semi and full auto selectable.
Almost all metal build with good weight and feel to it.
Black Ops branding looks good.
Great looking Compact AR Replica.
Cons:
No dedicated bolt release.
Will want to upgrade battery soon to get the most out of it.
Sights are non adjustable.
Comments:
The Bear River Black Ops SR4 CQ AEG Airsoft Rifle for the price is a real deal as far as I am concerned selling currently for just over $400 in the Canada Replica Airguns Store, and $299 in the US Store. Keep in mind that also includes the 9.6 volt battery and charger to get you started, (I would recommend an 11.1 volt LIPO battery for higher RPM and a more responsive trigger). I really like more compact Rifles as I just like the look and they are easier to maneuver on the field or indoors with less bulk to get in the way. For the price you get a lot with the Bear River Black Ops SR4 CQ AEG Airsoft Rifle so if you are on a bit of a budget but still want all the bells and whistles then go for it!
Type: Airsoft Rifle. Manufacturer: Specna Arms. Model: RRA SA-CO2 Materials: Metal and Plastic. Weight: 4.96 pounds (2.25 kilograms). Length: 27.5-31 inches (699-787mm) BarrelLength: 10.63 inches (270mm) inner 6.03mm tight bore non-rifled. Propulsion: AEG. Action: Semi & Full Auto SAO. AmmunitionType: 6mm Airsoft BB's. AmmunitionCapacity: Mid Cap 450 rounds. FPS: 410 using .20 gram Airsoft BB’s.
TriggerPull: Like almost every other AEG Airsoft Rifle I’ve reviewed in the past, the trigger pull on the Specna Arms RRA SA-CO2 AEG Airsoft Rifle is a SAO with a light and short trigger feel. Most AEG Airsoft Rifles basically have a trigger that is an electrical on/off switch. The trigger pressure is not super light but for sure not heavy and the pull length is about a half centimeter long (quarter inch or so) and when you get to the end it basically actives the electric motor which compresses the spring allowing for semi or full auto shooting depending on what you have selected. Keep in mind higher voltage batteries will wind faster and make the hesitation shorter from the time you pull the trigger till the spring releases and shoots a BB.
Accuracy: In most cases I make my Table Top Review Video for each gun I review first, so I will not be able to share my experience of how this Specna Arms RRA SA-CO2 AEG Airsoft Rifle performs as that experience has not happened yet. I am planning to make my Field Test Shooting Video in a couple of weeks so stay posted for that video. You can watch a similar Specna Arms Core AEG Airsoft rifle video I have made previously showcasing a Core versus Edge series. The Specna Arms RRA SA-CO2 AEG Airsoft Rifle should performs about the same as a similar Core AEG Airsoft Rifle from Specna Arms.
Build Quality: Generally speaking from my past hands on with Sepcna Arms products both in Core and Edge version, they have been good in terms of quality and build. The Core versions will be a step down from the Edge version but they have still proven to perform well and hav a good overall build with decent internals no matter which version you decide to go with. I will say I did experience a problem with my Specna Arms RRA SA-CO2 AEG Airsoft Rifle when I pulled the charging handle back I had a fairly major malfunction with it. I am fairly sure the spring got jammed and now the charging handle will not spring back into forward resting position. This should not affect my Field Test Shooting Video as the only real purpose of this type of charging system is to open the dust cover and allow access to the hop-up system. I can still do this but need to pull back the hop door manually. Getting back to build quality, you get a plastic reacievr, buffer tube, carry handle, fore grip, magazine, rear stock and pistol grip. Metal can be found in most of the controls, the barrel and of course the trigger.
Realism: Other than the Specna Arms RRA SA-CO2 AEG Airsoft Rifle having a fair amount of plastic components it is a very realistic copy of a similar styled AR type Rifle. It will be a bit lighter but feels decent to hold and you can add a bit of mass by swapping out the carry hand and fore grip with metal versions.
Pros:
More classic AR15 look to it if you prefer that.
Quality components throughout even in the lower priced Core series.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are fiberglass reenforced making them very durable.
Fully adjustable peep sight with two aperture positions.
No orange tips on our Canada Store versions.
6 position rear stock for varies shoulder pull lengths.
Metal V2 Gearboxes with metal gears and mostly all metal parts inside.
Easy access to motor for any possible trouble shooting you any need to do.
Cons:
Plastic receiver.
Charging handle had a major malfunction in my demo unit.
You will need a more compact and specific battery size/type with this style of AR AEG.
Comments:
It is unfortunate that my review version of the Specna Arms RRA SA-CO2 AEG Airsoft Rifle was defective, this can happen to any product ever high end Airguns. It does not happen very often thankfully and this would be the first time it has happened to me with a Specna Arms Product so don’t be too hard on them. Fortunately I should still be able to make my Field test Shooting Video and get that info out to everyone. As it stands I think the Specna Arms RRA SA-CO2 AEG Airsoft Rifle is well priced and good value (in 100% working condition of course). Personally I would look more at the Edge series as the quality is a for sure a big step up but not everyone has a big budget so get what works best for your needs and budget.
Type: Airsoft Rifle. Manufacturer: S&T Model: KAR98K Materials: Metal & Wood. Weight: 3300 grams (7.28 pounds). Total Length: 1120mm (44.1 inches). Barrel: 483mm (19 inches) Smooth bore. Power Source: Spring Piston. Action: Bolt Action - Single Action Only. Ammo Type: 6mm Airsoft BB. AmmoCapacity: 11 Round Magazine. FPS: 380-420.
Trivia: The Karabiner 98 kurz (German: "carbine 98 short", often abbreviated Kar98k or K98k and often incorrectly referred to as a K98 (which was a Polish Carbine) is a bolt-action rifle chambered for the 7.9257mm Mauser cartridge that was adopted on 21 June 1935 as the standard service rifle by the German Wehrmacht. It was one of the final developments in the long line of Mauser military rifles. Although supplemented by semi- and fully automatic rifles during World War II, it remained the primary German service rifle until the end of the war in 1945. Millions were captured by the Soviets at the conclusion of World War II and were widely distributed as military aid. The Karabiner 98k, therefore, continues to appear in conflicts across the world as they are taken out of storage during times of strife.
Trigger Pull: The trigger pull on S&T Matrix KAR98K Bolt Action Airsoft Rifle is a single action only trigger as the bolt action not only compresses the spring but also readies the trigger for release making the trigger pull short and light. There is a short amount of takeup with a crisp and light release.
Accuracy: I have not shot the S&T Matrix KAR98K Bolt Action Airsoft Rifle so far but plan to make a full dedicated Field Test Shooting Video shortly to find out what the actual real world velocity and accuracy will be. So stay posted for my upcoming shooting test in a few weeks time…
Build Quality: The build quality for the S&T Matrix KAR98K Bolt Action Airsoft Rifle is really good as it is made almost exclusively of either metal or wood. The stock is finished in a dark walnut stain and the metal has a rustic finish about it which is what you would find in a real steel aged version. You will also find a CNC Aluminum body along with a Reinforced metal barrel, bolt assembly and internals. The S&T KAR98K has a quality feel about it inside and out.
Realism: As mentioned earlier the finishes has a less refined look adding to the realism, that combined with the real wood stock really makes this Bolt Action Airsoft Rifle supper believable as a Replica Airgun. The only real giveaway is when you pull the bolt back and it is a solid unit with no visibility in to the magazine area. Other than that the S&T Matrix KAR98K Bolt Action Airsoft Rifle is a solid copy of the real steel version.
Pros:
Super believable replica of the real Kar98k.
Very solid build quality weighing over 7 pounds.
Realistic materials including the real wood stock.
CNC Aluminum body.
Reinforced metal barrel, bolt assembly and internals.
No need for a battery or to use CO2 or gas.
Adjustable rear sight on the fly for elevation.
Bolt action feels smooth.
Easy to adjust Hop-up.
Cons:
Does come with a red tip (should be able to remove).
Rear sight not adjustable for windage.
No sling included, would have been nice.
Bolt does not allow to see into magazine area.
Comments:
The S&T Matrix KAR98K Bolt Action Airsoft Rifle looks and feels the part for sure and has a lot of quality going on with it’s real wood stock and quality metal throughout. I love the finish of not only the wood stock but also the metal parts as they have a less refined and aged quality about them that would be similar as to how a real World War 2 rifle would look today. If you want an ultra realist bolt action World War 2 Carbine that you can shoot almost anywhere, then look no further. OK the sticker price on this one is a bit higher than some, but again so is the quality so if that's important to you be prepared to pay a bit more.
In this Field Test Indoor Shooting Video I take the Umarex T4E HK VP9 .43 Cal. Paintball Pistol through its paces to see what the actual velocity is and what kind accuracy I can get shooting at a paper target 30 feet away. For this Video Review I use a brand new CO2 along with .43 caliber rubber balls. I have already made a Table Top Video for the Umarex T4E HK VP9 so check that out if you’re interested in specifications and details along with more closeup video of this Paintball Pistol. And for fun I also made an interesting outside shooting video using actual Paintballs that highlights the Umarex T4E HK VP9 .43 Cal. Paintball Pistol.
So let’s get right to the results! For my Chronograph test, being indoors the temperature was about room temperature, maybe a bit lower at around 19-20 Degrees Celsius or 66-68 Degrees Fahrenheit. This can affect velocity as CO2 performs bettering in warmer conditions. My fastest Chronograph result was 283 fps while my slowest result was 268 fps averaging 277 fps so not bad as I was expecting just under 300 fps based on past experiences using similar Umarex T4E Blowback CO2 Paintball Pistols.
Next up in the Field Test was the accuracy portion, I often shoot 10 rounds in to my paper targets setup 30 feet down range, but since the Umarex T4E HK VP9 .43 Cal. Paintball Pistol magazine only holds 8 rounds I went with 8 rounds this time. I was also using a semi-rested shooting position with my hands resting on a sandbag up front and sitting on a stool in the back. I did get one Paintball that was a bit low but the other 7 all fell into a rather nice 4 inch grouping fairly well centered on the target just a bit to the right. 3 Paintballs even hit the bullseye which is pretty good for a Blowback Paintball Pistol in my books.
All in all the Umarex T4E HK VP9 .43 Cal. Paintball Pistol performed a lot like the other Umarex T4E CO2 Blowback .43 Caliber Paintball Pistols in their lineup, maybe perhaps this time around for me at least with a little bit more accuracy than past Field Tests. I had no problems with the Umarex T4E HK VP9 .43 Cal. Paintball Pistol shooting in my outside fun video and in this Indoor Field Test Video, the Umarex T4E HK VP9 has a decent DOA trigger that is fairly responsive and the blowback action has more recoil and snap than I was expecting. I would put the Umarex T4E HK VP9 .43 Cal. Paintball Pistol right in line with the other Umarex T4E CO2 Blowback .43 Caliber Paintball Pistols for sure, maybe even just a bit better in terms of my results on this day.
Summer will be over before we know it, so why not get out and shoot some Paintball Pistols on a bunch of random targets in the yard before fall kicks in! I rarely get to use actual Paintballs in my Paintball Guns as I mainly test indoors and so I pretty much have to use Rubber Balls or have to deal with a bunch of clean up afterwards.
So today I grabbed my two newest Umarex T4E Paintball Pistols, the Umarex T4E TR68 and Umarex T4E HK VP9. I of course I loaded them up with their appropriate ammo .68 and .43 caliber Paintballs, and headed outside.
Figuring out how to make the video interesting and get lots of different camera angles can be fun, so I decided to grab my Hover Camera X1 which I think from now on is going to be my new “Camera Man” when I need a camera recoding me as I move around. I also placed my Insta 360 One R and my iVUE Vista Camera glasses in the mix. All being audio recorded with my Comica Vimo C Wireless Lapel Mic so you can actually hear everything clearly.
Seems like a lot of production using all of these recording devices and then having to line up, cut and mix everything together in post. Well you guys are worth it and I’m a bit of a tech junky so it was all kind of fun for me too.
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:T4E HK VP9 Materials: Metal & Polymer. Weight: 790 grams (1.7 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: DAO Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball / Rubber Ball / Pepper Ball. Ammo Capacity: 8 Rounds. FPS: 300.
Trigger Pull: The trigger pull on Umarex T4E HK VP9 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger, the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger because of the added friction. The internal hammer/striker is engaged from the blowback action which does help lesson the overall triggers pull weight.
Accuracy: So far I have not had the opportunity to test the Umarex T4E HK VP9 .43 Cal. Paintball Pistol, so stay posted for my upcoming Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from the Umarex T4E HK VP9 .43 Cal. Paintball Pistol. For now you can watch my Field Test Shooting Video for the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol as it is very similar in design and should for the most part perform in a similar manner.
Build Quality: The build quality of the Umarex T4E HK VP9 .43 Cal. Paintball Pistol is good overal, you will find metal parts are where you would expect them to be, in the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E HK VP9 .43 Cal. Paintball Pistol a decent overall weight of almost 2 pounds with the magazine in which makes the Paintball version feel comparable to a real steel HK VP9 (710 grams - 25 ounces). The T4E HK VP9 does have a polymer frame but again this is normal with todays modern guns and helps keep the weight down. Fit and finish is also very good!
Realism: The Umarex T4E HK VP9 .43 Cal. Paintball Pistol is a fully licensed replica of the real steel HK VP9 via its Umarex Licensing. The Umarex T4E HK VP9 .43 Cal. Paintball Pistol is made specifically as a training tool for owners of similar real steel HK Handguns so for that reason it is made to replicate its powder burning counterpart very closely. You will find that the slide cycle distance is a bit shorter than it would be meaning that when the side catch is engaged the slide does not go as far back in the 9mm version. Field stripping the Umarex T4E HK VP9 .43 Cal. Paintball Pistol will requires some tools and pin removal.
Pros:
Accurate weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the gun.
Good for real steel H&K VP9 owners looking for a similar training weapon.
Everything works pretty much like the real gun so again great as a training tool.
Easy to see white dot sights front and back.
Working trigger safety
Fit and finish is very good.
Magazine spring release pops the magazine out just enough to grab it but not drop it on the floor.
.43 caliber barrel opening, adds to realism.
Warning instructions are a lot more discrete under the trigger guard and not super white in color.
Comes with additional grip parts to customize to various hand sizes.
Cons:
Magazine only holds 8 rounds, so you are going to need extra magazines for sure.
Blowback action is not full blowback, more like a typical half blowback BB gun.
Sights are non adjustable.
Comments:
The Umarex T4E HK VP9 .43 Cal. Paintball Pistol is mechanically very close to the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol and the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol in how it functions as a Paintball Pistol so I expect all of them to shoot very similarly and that’s not a bad thing since previous versions I have tested so far have performed rather well for me in the Replica Airguns Sea Can Indoor Shooting Range. If you are an HK fan then the Umarex T4E HK VP9 .43 Cal. Paintball Pistol is about as close as you are going to get in a Replica Paintball Pistol. Owning the paintball version will allow for a lot more opportunities to get some trigger time in and hone your shooting skill with a very similar gun to the one you my own, and at a fraction off the cot to 9mm ammo.
In this Replica Airguns Unboxing Video I take a look at 6 Airguns consisting of 2 Paintball Pistols, 3 Airsoft Rifles and one Pellet Rifle. This is not a full review in any way but is rather a preview of what i will be doing full Reviews for over the next several weeks.
This is not exclusive to Airguns since trends of Airguns are highly influenced by what type of Real Steel Pistols are popular to people. This is often based on what people see portrayed in movies and TV Series, and also promoted online. There is for sure an overlap in what is popular and it is hard to say what is influencing what? Is it the popularity of Pistols out in the real world that influences what we see being used in the movies and on TV? Or is it what we see in Movies and TV that influences our choices of pistols out in the real world? Perhaps it is a combination of both?
My list is based on my own personal experience and does not represent the entirety of types of Pistol designs available.
Last week I individually tested out the Barra Black Ops M4 Viper MK5 and the Krytac LVOA-C AEG Airsoft Rifles here in the Replica Airguns Indoor Sea Can Shooting Range to see how well they would perform. I was very surprised at how closely they performed considering the Barra Black Ops is around a quarter of the cost of the Krytac LVOA-C.
My testing in the Indoor Sea Can is a bit limited in terms of range as I can only set a target to about 30 feet away given the limitations of my 40 foot Sea Cam. I really wanted to take both of these AEG Airsfot Rifles and test them out at much longer ranges to see if the much lower cost Barra Black Ops M4 Viper MK5 could compete with the Krytac LVOA-C Airsoft Rifle at 50 feet and 100 feet respectively. So that’s exactly what I did! I did use a bit heavier Airsoft BB’s (.28 gram) for the longer range outdoors and much windier shooting conditions but I do have to say it was a bit windy on my testing day which I am sure played a roll.
I did place a few pre-test shots downrange at my 100 foot target to get an idea of where I needed to place my aim point and this did help me a bit to get in the ball park but by no way was a bang on in terms of sighting in. Because of this I did have to make some on-the-fly adjustments as I tested but was able to get rounds on paper at 100 feet even with the wind gusts.
In this second video I test out the more expensive of the two AEG Airsoft Rifles, the Krytac LVOA-C AEG Airsoft Rifle to see how it compared to my previous Barra Black Ops M4 Viper MK5 test. I was a bit surprised at the results expecting the Krytac LVOA-C Airsoft Rifle to be the clearly superior option. As it turns out there was actually very little difference at least in term of accuracy out of the box. That said the Krytac LVOA-C had a much more responsive trigger with virtually no delay between pulling the trigger and actual BB’s being fired. This also makes full auto shooting a completely different experience as the Krytac LVOA-C rounds per minute is out of this world!
