I don’t often make many Paintball Review Gun Videos let alone Shooting Videos so this one is a bit different than the norm. Lucky for me I have some .43 caliber Rubber Paintballs that I can use in my Indoor Sea Can Shooting Range so as not to make a mess of things. As per usual I like to use a brand new 12 Gram CO2 Cartridge for my testing and for your reference the temperature was right around room temperature or 21 degree Celsius, 69 degrees Fahrenheit.
First up I generally perform my Chronograph test to see what the real world velocity or fps is for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. I shot a short string of rubber rounds through my Chronograph and was able to get a 280 fps average with the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. This is plenty enough power for the intended target down range to feel the paintball effect without causing too much trauma.
With the remaining 10 rounds in my Umarex T4E HK 416 Training Marker CO2 Paintball Rifle magazine, I then setup a brand new paper target 30 feet down range and using a rested and seated shooting position and carefully unloaded the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle into the target. I was a bit surprised to see the rounds spread out a fair amount perhaps as much as 10-12 inches but at least half where in the target rings.
I would not recommend the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle as a long range paintball marker but it would be perfect for close quarters ultra realistic simulations. I would like to give actual .43 caliber paintballs a try outside to see if accuracy would be better, maybe the rubber balls grip the barrel a bit too much causing some random and unexpected spinning to occur? Either way the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle is a really unique and fun Paintball Gun to shoot, maybe not for everyone but if you want the most realistic Paintball Marker then it would be a great option.
Type: Paintball Rifle. Manufacturer:Umarex - T4E. Model:H&K 416. Materials: Metal & Polymer. Weight: 3016 grams (6.65 pounds). Barrel: Metal smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with internal working bolt blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 14 Rounds. FPS: 330-460?
Trigger Pull: The trigger pull on Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is pretty typical of what you would find on an AR styled rifle. Since the internal bolt cycles with each shot, the trigger is engaged and the Paintball rifle is ready for the next shot with a very light and short single action trigger pull.
Accuracy: So far I have not had the opportunity to test the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle other than placing a few rounds down range into my ammo trap to see how it shot and felt. Without actually shooting rounds through the Chronograph I don’t really know what the fps velocity is going to be but I can say it felt like it was shooting perhaps even over 400 fps? Out of the box the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle was shooting rather low but you can adjust the rear sight for windage and elevation.
Build Quality: The build quality of the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is very good since this Paintball gun is made for military and law enforcement training use. You’re going to find high quality metal and polymer where you would normally find them on the real steel version. The bolt carrier is expected to last at least 3000 shots but you do get an extra one included with it.
Realism: The fully licensed Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is about as realistic as you are going to get in a Paintball Rifle. It’s basically made very similar to a GBB Airsoft Rifle of the same type with a working bolt and pretty much all working parts on it. You can even break the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle down into the lower and upper receiver halves. The bolt blowback action is not super strong but this may be a good thing since CO2 usage will be more efficient allowing for higher fps and more shots per CO2.
Seem to have decent fps, will see when I do my Field Test?
Full Size drop out magazine that holds 14 .43 caliber Paintballs and the CO2.
Removable 4 position adjustable stock.
Removable and adjustable iron sights.
Lots of rials for adding accessories.
Fully licensed H&K 4116 replica via Umarex.
Blowback does give a bit of recoil feedback and allow for a true single action trigger.
Very high quality metaled polymer build.
Used as a training weapon for military and law enforcement.
Comes with extra bolt carrier.
Cons:
Very expensive, well over $1000!!
Comes with blue hardware but can be swapped out (Pistol grip, But stock, Magazine).
Bolt carrier may wear out at around 3000 rounds.
Comments:
If’ you’re looking for the ultimate in Paintball Rifle realism the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is going to meet that requirement for sure. It will come at a pretty decent cost but you are going to have a very unique Airgun that not many people will own. And as they say you do get what you pay for which is realism, quality and reliability. I look forward to testing out the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle on the Chronograph using some rubber ball ammo, I may even take it outside for some paintball ammo shooting, we will have to see…
In this Field Test Shooting Video I focus on Umarex’s latest CO2 Blowback BB Airgun, the Umarex Glock 17 4th Gen CO2 Blowback BB Pistol. We have been waiting a while for this one to ship and now that it’s here I really want to get to shooting it and finding out if it performed as good as it looked and felt.
I loaded up my Umarex Glock 17 4th Gen CO2 Blowback BB Pistol with a brand new 12 gram Sig Sauer CO2 cartridges along with some 4.5mm RWS 5.1 grain Zinc coated BB’s and began the Chronograph portion of my Indoor Field Test Shooting Video. The temperature was not overly warm sitting right around 19 degrees Celsius or 66 degrees Fahrenheit. Umarex claims roughly around 300 fps from the Umarex Glock 17 4th Gen CO2 Blowback BB Pistol but I was able to get just a bit high with my 5 shots through the Chronograph averaging 310 fps.
I then put up a paper target 30 feet down range, reloaded my full size drop out metal magazine with 10 more steel BB’s and proceeded to carefully place the 10 shots into the target using a rested and seated shooting position. I was able to get around a 3.5 inch grouping but I feel I could have done better since several rounds actually shot one on top of the other. The Umarex Glock 17 4th Gen CO2 Blowback BB Pistol did shot just a little bit low and to the left but not a lot.
Type: Blowback CO2 BB Pistol. Manufacturer: Distributed by Umarex. Model:Glock 17 Gen 4. Materials: Metal & Polymer. Weight: 1.7 pounds (771 grams). Barrel: 3.6 inches metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 18 round drop out full size metal magazine. FPS: Claimed 300.
Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol is single action only so you will need to rack the slide first to not only chamber a 4.5mm Steel BB in the breach area but to also cock the internal striker. There is a working trigger safety on the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol and you’ll also find the Glock 17 Gen 4 has a nice short and light trigger as you would expect similar to the real steel Glock. Perfect for fast action shooting!
Accuracy: At this point I have not shot the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol so I can only quote what Umarex is saying in terms of FP2 which is 300. That sounds reasonable based on other Airguns like this that have that full blowback action since much of the CO2 gas is used to work the action of the slide. This not only reduces how many shots you can expect o get out of a single 12 gram CO2 cartridge but a reduction in power over non-blowback or even partial blowback CO2 Airguns.
Build Quality: TheUmarex Glock 17 Gen 4 CO2 Blowback BB Pistol looks to be well made overall with metal and plastic parts where you would find them on a real steel Glock 17 Gen 4. Fit and finish are nice and the slide wiggle is next to zero. The slide spring is very heavy and the sound of the slide when racked and released does not have that cheap metallic sound some blowback Airguns have. I am expecting some pretty decent blowback action recoil from the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol when I do my Field Test Shooting Review!
Realism: The Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol 100% looks the part of a Glock 17 4th Generation, sitting on the table and even holding it in your hand you are going to think it's the real deal until of course you drop the magazine and see that it is a BB/CO2 mag. Mostly everything operates like a real Glock 17 including the slide catch release, trigger safety, magazine release and even the take down switches for quick field stripping and access to the adjustable hop-up, yes it is adjustable. Available From: The Replica Airguns Store.
Pros:
Good weight and feel to it, build quality seems very good.
Really nice looking and full featured replica of the original Glock 17 Gen 4.
Fully Glock licensed through Umarex.
Easy to see white dot sights front and back.
Recessed barrel for added realism.
Accessory rail for adding a laser or tactical light.
Full size drop out metal magazine that holds the CO2 and 18 4.5mm steel BB’s.
Slide spring feels heavier than most full blowback Airguns, should have a heavy blowback recoil effect.
Safety built into the serial number plate area keeps it well hidden.
Comes with additional Backstraps for different sized hands.
Warning instruction are nice and discreet under trigger guard.
Great feeling single action only trigger as the blowback pre-cocks the internal hammer/strike.
300 fps is decent for a full blowback BB gun.
Cons:
FPS could be higher but fairly inline with other full blowback CO2 air pistols.
Sight are non-adjustable which is common with low cost Airguns like this one.
Would have liked to have seen more pristine packaging from Glock..
Comments:
I know everyone has been waiting for Umarex to release the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol and here it is finally, does it live up to all the hype and excitement? So far without shooting it I have to say yes, I am very pleased with how the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol looks and feels. There is not too much more you can ask for in a replica Airgun of any kind… it looks like the real steel version, it feels like there real steel version, it functions like there real steel version. Hopefully it shoots just as well! If you haven’t bought one of the Umarex Glocks so far then this one is the one to have, but I say why not have them all :)
I’m going to start off by saying this Field Test Shooting Review for the G&G GPM1911 GBB Airsoft Pistol did not go all that well as I had some complications with this Airgun when chambering rounds. I am pretty sure it is magazine related and hope to try a different magazine with it soon. I say this because I am following through with my review regardless of my initial results to demonstrate that not all Airguns perform as expected during my reviews and sometimes you get a lemon even with a good quality brand like G&G.
I am fairly certain the defect in this case for the G&G GPM1911 GBB Airsoft Pistol was the magazine tip being too tight and not allowing an Airsoft BB to position all the way to the top of the magazine which means when the slide cycled and the nozzle was in position to push an Airsoft BB into the breach, it simple was hitting the top of the BB and pushing it even further into the magazine. All said and done I was able to test the fps and accuracy on target so let’s get on with my review.
Using .20 gram Airsoft BB’s with a fully filled propane gas magazine in my G&G GPM1911 GBB Airsoft Pistol, I was able to get 6 recoreded shots through my Chronograph averaging 319 fps. The slowest shot being 313 fps and the fastest shot hitting 330 fps. The temperature was right around room temperature so around 22 degrees Celsius or 72 degrees Fahrenheit.
As I was having issues with with the G&G GPM1911 GBB Airsoft Pistol chambering rounds with the .20 gram Airsoft BB’s. I was hoping that when I switched to a different .32 gram Airsoft BB for my target portion of this review that perhaps the different Airsoft BB’s would chamber better but they did not. To get through the target portion of my test, with each shot I had to drop the magazine, make sure the Airsoft BB’s was at the top of the magazine, rack the slide, insert the magazine and then release the slide. So as you can see I was resetting completely for each shot which does not always make for the tightest groupings. Surprisingly I was still able to get about a 1.5 inch grouping on my paper target setup 30 feet downrange using a rested and seated shooting position.
Not all reviews go as planned but you still have to make the best of it. I really feel the G&G GPM1911 GBB Airsoft Pistol is a good gun overall even though mine did not perform that well for me. When I was able to chamber a round it shot a consistent fps and placed Airsoft BB’s downrange accurately and very close to the bullseye. Perhaps simply by swapping out the magazine I will have a much more reliable Airsoft gun? I will have to get back to you on that one.
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: GPM1911 Materials: Metal slide, frame & Magazine. Weight: 2.25 pounds (1020 grams). Length: 8.66 inches (22.0 cm) total. Barrel: 4.58 inches (11.7 cm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 25 rounds. FPS: 300-330 fps.
Trigger Pull: The single action only trigger pull on the G&G GPM1911 GBB Airsoft Pistol is what you would expect from a traditional single action only 1911 trigger, a very short take-up and a crips and light release. Great for getting a lot fo shoots off quickly and accurately down range without making your trigger finger do a lot of work.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM1911 GBB Airsoft Pistol so I can into comment just yet but I will be making a Field Test Shooting Video for it as soon as I can and will post that here on the website and of course over on the Replica Airguns YouTube channel when I have it ready.
Build Quality: The G&G GPM1911 GBB Airsoft Pistol is in my opinion one for the nicer looking finishes wise and I would have to say it seems to also be one of the better quality 1911 Airguns out there, for sure a step up from a KWC blowback 1911’s and in line with what KWA and KJWorks is making these days which is good quality. The G&G GPM1911 GBB Airsoft Pistol is one of the heavier Airsoft 1911 Blowback Pistols which makes me think the metal is a bit higher quality where it needs to be. Tolerances are nice and tight and the blowbacks action is very heavy.
Realism: The G&G GPM1911 GBB Airsoft Pistol like most of these full blowback 1911 Airguns, Steel BB or Airsoft BB, is super realistic with an all metal build. All the real steel working parts like the slide catch release, back strap safety and pretty much everything else function as they should. The G&G GPM1911 GBB Airsoft Pistol even field strips like a traditional 1911 pistol. Not sure what you could do to make it more authentic for an Airgun?
Nice high capacity magazine compared to other GBB 1911 Airsoft pistols.
Heavier than most Airsoft 1911’s.
All parts fit nice and tight, tolerances are very good.
Working back-strap safety.
No ugly red tip.
Finish is really nice, gun looks really good.
Expect to get decent amount of shots per gas fill.
Micro Gas Filter and Whirl Cylinder Valve help to manage gas efficiency and reduced frost buildup.
Traditional adjustable Hop-up.
Full Size Dropout metal magazine pretty standard on Airsoft pistols.
Comes with high quality hard shell case and speed loader.
Cons:
Sights are pretty basic, no white dots and non-adjustable as you would expect on a 1911 A1.
Very simple Airsoft gun, no modern bits and pieces on it.
FPS could be a bit higher but fine for close quarters.
Comments:
The G&G GPM1911 GBB Airsoft Pistol is for sure one of the nicer 1911 A1 styled Airsoft pistols, inline with KWC and KJWorks. It does come in a little bit heavier and seems to have more blowback recoil action which is nice. All I need to do now is find out how well it shoots! If it’s not half bad then it is for sure worth the price which by the way is a little bit cheaper than a KWA or KJWorks 1911 and about the same price as a KWC 1911. So many choices I know but that’s a good thing :)
My Table Top Review of the G&G GPM1911 GBB Airsoft Pistol:
Trigger Pull: The trigger pull on the KWC Makarov PM CO2 NBB BB Pistol is pretty decent for a double action only trigger, certainly light enough for some fairly fast action shooting without tiring your trigger finger too much. It would have been nice to have been able to cock the hammer for some slower and more precise single action shots.
Accuracy: So far I have not had the chance to test out the shooting performances for the KWC Makarov PM CO2 NBB BB Pistol, but I am expecting it to get sub 2 inch 10 shot groupings from 30 feet out and hopefully the KWC Makarov PM CO2 NBB BB Pistol will chronograph in close to the 400 claimed fps. Watch for my Field Test Shooting Video down the road.
Build Quality: The KWC Makarov PM CO2 NBB BB Pistol is a pretty basic CO2 BB Airgun, basically two metal halves of the frame screwed together and not a lot of working parts. It’s almost all metal except for the grips and hammer and has a good weight and solid feel to it so I expect it to hold up well over time. The fit and finishes seem just fine but it does have some noticeable seems going all around the Airgun where the two halves join together.
Realism: The KWC Makarov PM CO2 NBB BB Pistol at first looks like a real steel Makarov, it’s about the right size and weight, has a recessed barrel and no CO2 tab on the bottom so overall a good looking replica. It’s when you look a little bit closer look that you can really tell, from the lack of an open ejection port to the small screws on the right hand side of the KWC Makarov PM CO2 NBB BB Pistol. When you start to play around with it you will notice the hammer is plastic and only for show and of course not being a blowback gun the slide and slide catch release do not function at all.
Pros:
Full metal frame.
All metal full size drop out magazine that holds the BB’s and CO2.
Working safety, and magazine release.
Because it’s NBB it will get higher fps and more shots per CO2.
No ugly CO2 tab on the magazine.
Seems to have a decent double action only trigger.
Very affordable at around $70 Canadian.
Less moving parts means less to go wrong for longer reliability.
Cons:
No blowback operation so no single action trigger or simulated recoil.
Ejection port is not cut out and hammer is only for show.
Has those ugly screws on one side of the frame.
Comments:
Most of you probably already know I am a bit of a Blowback operation Airgun snob so when I review Non Blowback Airguns I am generally not as excited. What can I say, I just like the simulated recoil Blowback offers and the fact that Blowback Airguns will generally allow for a much lighter and shorter single action trigger. The plus side to a Non Blowback Airgun is going to be four main points: Usually a lower price tag, faster fps, more shots per CO2 and better longevity of the gun since there are a lot less moving parts to wear or break. It really come down to what you prefer, but the good news is you can have your choice of a Non Blowback Makarov like the KWC Makarov PM CO2 NBB BB Pistol or you can go with the blowback KWC Makarov PM CO2 Blowback BB Pistol. Or better yet, why not both!
My Video Review for the KWC Makarov PM CO2 NBB BB Pistol:
Type: BB air pistol. Manufacturer: Air Venturi - KWC. Model: Springfield Armory 1911 Mil-Spec. Materials: Pretty much all metal build. Weight: 2 pounds (907 Grams). Barrel: 4.38 inchesBrass, non-rifled. Propulsion: CO2 x1. Action: Semi auto blowback, single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 18 rounds. FPS: 320.
Trigger Pull: The trigger pull on the Air Venturi Springfield Armory 1911 CO2 Blowback BB Pistol is like all the other KWC made CO2 full blowback 1911's, it's exactly what you would expect from a real steel 1911 single action only pistol which helps to make this replica 1911 a great trainer or show piece. So in other words the trigger pull is super short, super light with very little take-up and a nice crisp break.
Accuracy: I have not shot this "exact version" of the KWC Air Venturi 1911 but it will undoubtedly perform very much like all the other incarnations. I can expect decent under 2 inch groupings from 30 feet out and will get a little over 300 fps on a full CO2 cartridges as long as it’s decently warm out. Depending on how fast I shoot off my magazines, I should expect to get around 3 good mags and if I slow things down a bit I should get a forth magazine so anywhere from 50-70 good or so shots per CO2 out of the Air Venturi Springfield Armory 1911 CO2 Blowback BB Pistol. I may or may not make a Field Test Shooting Video for the Air Venturi Springfield Armory 1911 CO2 Blowback BB Pistol…
Build Quality: Very good, with almost all metal construction, good weight and craftsmanship, the KWC 1911 line of pistols have proven themselves over time, that said they will not last forever since these are not expensive guns made out of high quality metals. You will find most of these KWC pistols in general have a rather thin coating for a finish and so they tend to wear a bit on the high spots but over time this has been improving with KWC made Airguns.
Realism: This is as close as you can come to the look, weight, feel, and action of the real 1911 in virtually almost every way including the ability to field strip this pistol exactly the same! All the mechanical parts work just like they do on a real steel 1911 including the grip safety. On top of all of this Air Venturi has licensed the Air Venturi Springfield Armory 1911 CO2 Blowback BB Pistol with very realistic Springfield branding thought the Airgun.
All metal construction - Good weight and solid feeling gun.
Heavy blowback action with that 1911 sluggish feel.
Very Accurate 1911 A1 styled replica in pretty much every way.
True 1911 Single action trigger, excellent pull, very smooth and light.
Working backstop safety
3 dot white sights help with target acquisition on darker backgrounds.
Could mix and match other KWC 1911 parts.
Springfield Armory licensed by Air Venturi.
Good accuracy, not too bad amount of shots for this style of gun about 3 good magazines.
Cons:
Non adjustable sights.
Sacrifice fps and shots per CO2 because of the heavy blowback action but worth it.
Not Available at time of video.
Comments:
I really never get tired of making reviews for the KWC 1911 line of CO2 Blowback Airguns, sure they are all made from the same base KWC 1911 Aigun but each one has its own unique look and customization to it. I really like the Faux plastic wood grips with the deep Springfield Armory licensing on this version. And the matt black slide and frame with the chrome barrel and silver barrel bushing really look sharp on this 1911 BB Gun. Even though the Air Venturi Springfield Armory 1911 CO2 Blowback BB Pistol is basically a standard 1911 A1, the added touch of the White Dot sights will for sure help when shooting this Blowback BB Gun at what ever target you point it at.
My Videos for the Air Venturi Springfield Armory 1911 CO2 Blowback BB Pistol:
I keep getting more and more really cool airguns to review and it’s been hard to keep up with them all and get out Table Top and Field Test videos for each new product. I at least want to be able to get the word out so to speak for some of the new Airguns that come across my tassel even if I may not be able to get to their full reviews right away.
That said I have two new Airguns that we have in our Replica Airguns Stores to show everyone, the Webley Nemesis in .177 Caliber Pellet and the G&G GPM1911 GBB Airsoft Pistol. Both could not be any more different for sure but I really like each of them for their own reasons.
The Webley Nemesis is a very unique CO2 powered pistols since it is bolt action like many of the corpsman pistols but the Webley Nemesis .177 Caliber Pellet Pistol comes with a duel sided rotary magazine that holds 7 rounds on each side, the .22 caliber version holds 6 rounds on each side. The .177 caliber version can shoot up to 450 fps while the .22 caliber version has a claimed fps of up to 370. I look forward to testing and reviewing the Webley Nemesis .177 Caliber Pellet Pistol as soon as I can.
I also showcase the G&G GPM1911 GBB Airsoft Pistol which is a well priced basic A1 styled 1911 that is really well built and about one of the heaviest full metal 1911’s I have come across to date hitting the scale at nearly 2 pounds and 4 ounces. Another Replica Airgun I look forward to treating out!
Lots of CO2 BB Rifles getting reviewed these days and that’s kind of awesome, I remember a few years back and we barely had any realistic Replica BB rifles available to us. Now we have an ever increasing list of choices from Historical to Modern.
Todays Field Test Shooting Video focusses on the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle, I have not done my Table Top Video yet for it but I did make a preview video where I show it around a bit and talk about some basic specs. In short the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle is a CO2 powered semi auto 4.5mm Steel BB firing replica of the Springfield Armory M1 Carbine. It holds the CO2 and 15 rounds of Steel BB’s in its full size drop out metal magazine. Available with a plastic or upgraded wood stock.
For the Field Test Shooting part of this review I tested out the power and accuracy of the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle by first shooting 5 rounds through my Chronograph to establish the Feet Per Second velocity. I then placed a fresh paper target 30 feet downrange, while using a rested and seated shooting position I fired off 10 rounds into the target to see how tight of a group I can get with the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle. I used a brand new CO2 along with 5.1 grain 4.5mm Zinc coated Steel BB’s. The temperature was a conservative 22 degrees Celsius or 71 degrees Fahrenheit.
During my Chronograph velocity test I was a bit surprised to only obtain an average of 335 fps from the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle. Air Venturi claims closer to 425 so I am not sure why it was nearly 100 fps lower than claimed but perhaps the CO2 did not pierce as well as it could have, that said 335 fps does get the job done when shooting targets 20-30 feet away.
In terms of accuracy I was very pleased with the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle, it kind of made up for the slower than expected feet per second by getting a sub 1 inch 10 round group and I am not a big fan of peep sights so I was really not expecting these results. Right out of the box the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle shot pretty close to the bullseye, just s slight bit to the left and about 1-2 inches high. The rear sight is adjustable for elevation so that can be taken care of pretty easy.
The purpose of my Field Test Shooting Video is to find out how the airgun being reviewed performs in terms of velocity and accuracy, and if the ratings on paper end-up being the same or close to the tested results. Crosman claims the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is capable of shooting 5.1 grain 4.5mm Steel BB’s at up to 430 fps. When I tested the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun using my Chronograph averaging out 5 shots using a brand new set of CO2 cartridges I averaged 385 fps. Note the temperature in my Indoor Airgun Sea Can Shooting Range was not super warm at about 20-22 degrees Celsius or right around 70 degrees Fahrenheit. I was able to get 405 fps from the Crosman DPMS SBR CO2 Blowback BB M4 but I have a feeling the temperate may have been a little bit warmer for the DPMS SBR Testing which does help to increase the fps.
Moving on to the accuracy portion of this Field Test Shooting Review for the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun, I loaded up the 25 round magazine with the maximum amount t it would hold and then placed 10 semi auto shots on my paper target setup 30 feet downrange. I was using a rested and seated shooting position to help minimize human factor. I was a bit surprised that the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun shot a 2.5 inch semi auto 10 shot group since the Crosman DPMS SBR CO2 Blowback BB M4 was able to get just under 1 inch when I performed the same test.
I then flipped the semi auto selector switch to full auto and dumped the remaining 15 rounds into my paper target in full auto mode and to my surprise the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun actually tightened up it’s grouping a little bit closer to 1.5 inches which is amazing in full auto mode with the airgun rocking around a lot due to the blowback action.
I think it really comes down to which of the Crosman AR type full auto BB rifles you like the look of since both are very capable shooters. Or just get both if you can’t decide :)
In this Field Test Shooting Review Video I test out both the 3.8 Compact and 4.5 Full Size Air Venturi Springfield Armory XDM Blowback CO2 BB Pistols to see how they perform in both velocity and accuracy. I thought it would be interesting to see how the shorter and longer barreled versions compare side by side and if we sill see a difference in power and down range accuracy…
As always I use a brand new 12 gram CO2 along with 5.1 gran zinc coated steel BB’s for my testing and on this day the temperature in the Sea Can Indoor Airgun range was around 24 degrees Celsius or 75 degrees Fahrenheit.
This Review for the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a bit different than most I do since usually I perform a dedicated Table Top and Field Test Reviews for each gun I review here on the Replica Airguns Website. I feel that since the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is such a “long gun” that showing it on the table would not work so well , plus it was a super nice day and I wanted to get outside and maybe even shoot a little bit.
I will be performing my usual Field Test Shooting video where I test the Feet Per Second and accuracy at 30 feet so stay posted for that. For now I will leave you with this outdoor “Show and Tell” review.
Specifications:
Type: CO2 BB Rifle. Manufacturer: Umarex Model: Umarex Legends Cowboy Materials: Mainly metal with plastic stock. Weight: 5.95 pounds (2699 grams). Length: 38 inches total length Barrel: 19.25 inch Metal non-rifled smooth bore. Propulsion: Dual 12 gram CO2. Action: Lever Action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 10. FPS: 410 fps.
Trigger Pull: The trigger pull on the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is pretty much a single action only trigger since you will need to work the lever action to not only elect and chamber a shell but to also pre cock the hammer. Once the hammer is cocked and ready the trigger pull is short, light and crips, perfect for accurate shooting.
Accuracy: I have only shot 16 rounds through the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle during the making of this review video and found the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle to shoot right on target at 30 feet out. I did notice it shot just slightly high at this range but not a lot and it was dead center windage wise. For longer ranges you can adjust the rear sight to raise the barrel even more. In terms of power it’s hard to say what I was getting, Umarex says it should hit around 410 fps, I felt like it was pretty close to this , maybe a tad bit faster but I will find out for sure when I perform my Field Test Shooting Video Review shortly.
Build Quality: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle looks and feels great coming in at nearly 6 pounds and built out of mostly metal with a plastic stock. Don’t be too put out by the plastic stock, it does mimmic the part of wood very well. All the metal parts have a semi-gloss or I would even say matt back finish and so far the paint is wearing pretty good, no noticeable paint coming off that I can see. The action works great with no failure to chamber, eject or shoot rounds.
Realism: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is an awesome example of the classic lever action cowboy rifle. Having the ejecting shells makes it feel like you are shooting the real deal right from the time you start loading up the 10 shells into the pipe magazine, until you work that lever action and pull the trigger. Watching the ejected shells fly through the air is the icing on the cake :) There is not much more you can ask for from a BB firing replica Lever Action Cowboy Rifle!
Pros:
Super realistic replica lever action BB firing Cowboy Rifle.
Fully working lever action, chambers and ejects shells perfectly.
Good weight and feel to it with lots of metal throughout.
Everything works exactly like the real steel version.
Duel CO2 to help get not only more shots before reloading CO2 but also a more consistent FPS from all shots.
Adjustable rear sight for elevation.
Comes with 10 rounds and can also use your Umarex Colt Single Action Army BB shells in it.
Plastic imitation wood stock looks very much like real wood.
Cons:
Stock is not real wood, hopefully Umarex offers a wood upgrade for it at some time.
A bit low in FPS, why not take it right up to 499 fps since the US version has a 600 fps rating.
Took too long for us to get it here in Canada!.
Comments:
The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a perfect example of an Airgun company listening to their customers and bringing to market exactly what we are looking for, kind of like the Single Action Army Revolvers that came out a while back. These old cowboy guns are a blast to shoot from the time you pick up the rifle, insert 10 shells into the magazine, work the lever action, pull that trigger and then repeat 10 times. This is a must have for anyone looking for a super realistic BB rifle, even if you’re not an old west cowboy fan I think you will love shooting the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle!
My Table Top Video of the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle:
Watch my Video for all the main differences but in short here they are for those reading this post:
Steel BB version uses CO2 while the Airsoft version uses Green Gas or Propane.
There is no orange tip on the Steel BB version while Airsoft versions come with orange tips installed.
Steel BB versions have 20 round full length magazines for both the 3.8 and 4.5 inch versions, while the Airsoft 3.8 compact comes with the shorter 14 round magazine and the Airsoft 4.5 comes with a longer 25 round magazine.
FPS for the Steel BB versions are 270fps for the 3.8 and 325fps for the 4.5, comparably the Airsoft 3.8 is claimed to have 280fps with the 4.5 version a bit higher at 330fps. (Keep in mind that steel BB’s weigh more at around .33 grams compared to the .20 gram plastic Airsoft BB’s used for testing).
I did notice that on the sliver slide version, my earlier Airsoft 4.5 had more of a parkerized metallic finish while my same Steel BB version I received at a later time had more of brushed stainless look to it. Air Venturi has since informed me that all silver slide version will now have the brushed stainless finish.
It felt like Christmas the other day when a bunch of Springfield Armory new products showed up at my door! So first off thanks to Air Venturi for sending me these new products for review. I already got my hands on the Springfield Armory XDM 3.8 and 4.5 GBB Airsoft version but have been wanting to also review the CO2 Blowback Steel BB versions.
In this video I show all these new Springfield Armory CO2 Blowback BB guns quickly but will of course be making dedicated Table Top and Fired Test Shooting Video for them upcoming.
Type: Gas Blowback Airsoft Pistol. Manufacturer: Air Venturi Model: Springfield Armory XDM 3.8 & 4.5 Inch Materials: Metal slide & Mag with Polymer frame. Weight: 1.75 & 1.9 pounds (794 & 861 grams). Length: 7.25 & 8.25 inches total length Barrel: 3.8 & 4.5 inch Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 14 & 25 rounds. FPS: 280-330 fps.
Trigger Pull: The single action only trigger pull on the Air Venturi Springfield Armory XDM GBB Airsoft Pistol is pretty much what you would expect on a striker fired SAO pistol. There is very little take up with a light release which should make for great action shooting and help with accuracy when slowing things down a bit.
Accuracy: This time I actually have done my Field Test Shooting video for the Air Venturi Springfield Armory XDM GBB Airsoft Pistol and it did pretty good, getting a 2 inch 10 round grouping from 30 feet away shooting just a bit low on the target, nothing a bit of hop-up adjustment shouldn’t be able to account for. The claimed fps is 330 for the 4.5 inch version and I was able to average right around 300.
Build Quality: At SHOT Show this year I commented on the Air Venturi Springfield Armory XDM Pistols and how great they looked and felt. Nothing really different now that I have them in my hands for review. I did notice that my AIrsoft version with the Silver Slide had a kind of metallic parkerized finish while my BB Silver Slide version has a more stainless steel look. I prefer the Stainless Steel look a lot more and feel it makes the Air Venturi Springfield Armory XDM Pistols look higher quality. Hopefully Air Venturi sticks with the Stainless Steel finish? Build quality and finish are good thought the gun.
Realism: The Air Venturi Springfield Armory XDM GBB Airsoft Pistol is really one of the best 1 to 1 copies I have seen out there. It looks pretty much identical including all the licensing and markings in all the right places. It also is full blowback with a full size drop out metal magazine and all the mechanical working parts work the same as the real steel version including the trigger safety, grip safety, slide catch release, take down leaver and magazine release. Field striping is done just like the 9mm big brother allowing for easy hop-up adjustments.
Lots of metal parts where the real steel version would also have them.
Fully Field Strippable.
Adjustable Hop-up.
Easy to use sights, fiber optic up front and white dot on the back.
Springfield Armory fully Licensed.
Working serial number, trigger and backstop safeties.
Comes with different sized back straps for small to large hands.
Rail for adding accessories.
Warning instructions are nice and discreet!
Your choice of compact or full size versions also in all black or silver slide.
Performed well in my Field Test Shooting Review getting a 2 inch 10 shot grouping and close to the claimed fps.
Cons:
Comes with the orange tip we all love but should be pretty easy to remove.
Sights are non-adjustable. Can use Hop-up to bring shots up or down.
Silver Slide Airsoft version finish is not my favorite.
Comments:
Like I said at SHOT Show this year I was super impressed with the entire Springfield Armory lineup and now that I have them in my hands I am still just as impressed with the Air Venturi Springfield Armory XDM GBB Airsoft Pistols. You are getting pretty much what everyone looks for in a Replica Airgun: 1 to 1 size and similar weight, full blowback action, full size drop out metal magazine, fully licensed, adjustable hop-up, filed strippable and similar build materials you would find as compared to the real steel 9mm version. I also like that you have a ton of choice offered by Air Venturi: Airsoft or BB, 3.8 inch compact or 4.5 inch full size, silver or black slide and even short lower capacity or longer high capacity magazines for the 3.8 inch version.
My Table Top Review of the Air Venturi Springfield Armory XDM GBB Airsoft Pistol
Type: BB Rifle. Manufacturer: Crosman. Model: Bushmaster MPW. Materials: Metal & plastic. Weight: 6.5 pounds (4.98 kilograms). Length: 21 inches (Stock all the way in). Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 rounds. FPS: 430fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The bonus with the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is when you switch it over to full auto mode and just one pull and hold of the trigger will empty the 25 round magazine in just seconds.
Accuracy: So far I have not actually shot the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun but since the internals are exactly the same as the Crosman DPMS SBR CO2 Blowback BB M4 I have already fully review, then I will expect it to performa about the same until I do my Field Test Shooting Review. You shoudl expect about 400 fps in semi auto mode and in terms of accuracy I hope to get a similar 3/4 inch 10 round semi auto grouping from 30 feet away. Full auto will open up the group a bit but not too much, maybe around 2 inches…
Build Quality: The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is well made all around. Weighing in at 6.5 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real M4 other than the forward assist which is moulded into the receiver.
Pros:
Super realistic working M4/AR 4.5mm BB Rifle just like the DPMS SBR but in a different flavor.
Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.
Good weight and feel to it.
Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch…)
Duel CO2 full metal drop out magazine that holds the 25 4.5mm steel BB’s.
Adjustable and customizable AR buttstock.
Included red dot sights and ability to add pop-up iron sights.
Lots of rails for mounting additional cool hardware.
Built in Mock Suppressor.
Cons:
Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.
No iron sights included.
No fore grip included like the DPMS SBR.
Comments:
The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR CO2 Blowback BB Full Auto Rifle with more or less Cosmetic changes. One big advantage over the DPMS SBR is the AR comparable buffer tube which allows you to swap out any AR styled rear stock you choose! You also get an included Red Dot sight since there are no Iron sights. The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is super customizable with its quad-rail so go ahead and dress yours up with Iron sights, lasers, tactical lights, foregrips or whatever else you can dream up.
My Table Top Video of the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun:
Using .20 gram BB’s I loaded up the Air Venturi Springfield Armory XDM GBB Airsoft Pistol with propane gas and placed several rounds through my Chronograph to see what the feet per second average would be. The last 5 shots I took where actual the fastest averaging 290 fps, a little bit slower than I was expecting but just about right for close quarters Airsoft games.
I then switched over to .32 gram Airsoft BB’s since they tend to be a bit more accurate out at longer ranges. Using a fresh paper target and shooting from a rested and seated position 30 feet away, I took 10 shots with the Air Venturi Springfield Armory XDM GBB Airsoft Pistol. The result was a 10 round grouping of about 2 inches with one straggler just outside the main group. The Air Venturi Springfield Armory XDM GBB Airsoft Pistol did shoot a little bit low at 30 feet but I am sure the hop-up can be adjusted for this. It was well centered left to right which is a good thing since the sights are non-adjustable.
I really like the Air Venturi Springfield Armory XDM GBB Airsoft Pistol, it looks and feels very solid with a nice balance in the hand. The Single Action Only Trigger is short and light making follow up shots quick and responsive. The blowback action is crisp with good simulated recoil. I look forward to trying out the Steel BB version of the Air Venturi Springfield Armory XDM GBB Pistol as soon as I get my hands on one which should be pretty soon. Take your pick, Airsoft or Steel BB, either is a great choice!
In this Field Test Shooting video I perform two main Airgun tests using the Sig Sauer P365 CO2 Blowback BB Pistol. The Chronograph Test to find out what the actual real world velocity is using a brand new CO2 along with 5.1 grain 4.5mm high quality Steel BB’s. And secondly I perform an Accuracy Test where I shoot 10 rounds at a paper target setup 30 feet away while using a rested seated position to take out as much human factor as possible. By the way the temperature on this day in the Sea Can Indoor Airgun Shooting Range was 24 degrees Celsius or 75 degrees Fahrenheit.
Starting with the Chronograph Test, I shot 5 rounds with the Sig Sauer P365 CO2 Blowback BB Pistol through my Chronograph and averaged 287 fps with the fastest being 297 fps and the lowest being 276 fps. This was pretty close to Sig Sauers 295 maximum fps claim and right in line for a super short barrelled blowback BB pistol.
So how did the Sig Sauer P365 CO2 Blowback BB Pistol do in terms of accuracy? Well not bad. I was able to get around a 2.5 inch 10 shot grouping with all but one shot hitting within 2 inches of each other. I did find the Sig Sauer P365 CO2 Blowback BB Pistol shot a little bit low at 30 feet but not a crazy amount. In terms of windage it was well centered, maybe just a hair to the right.
Overall the Sig Sauer P365 CO2 Blowback BB Pistol is a nice shooter, it has a very fast and snappy blowback action and makes a kind of popping sound that’s is louder than I expected. The SAO trigger when using good quality smooth 4.5mm Steel BB’s was decent allowing me to concentrate on my shooting rather than struggle with the trigger. All in all I really love this little Air Pistol, Sig Sauer did a great job bringing it to market and getting as much into the Sig Sauer P365 CO2 Blowback BB Pistol as they could considering it’s super compact size.
Type: Air Pistol. Manufacturer: Sig Sauer ASP Model:Sig Sauer P365. Materials: Metal and polymer build. Weight: .8 pounds (363 Grams). Barrel: 3.2 inches - smooth bore. Propulsion: 12 gram CO2. Action: Blowback singe action only. Ammunition Type: 4.5mm steel BB’s. Ammunition Capacity: 12 round full size drop out magazine. Max FPS: 295.
Trigger Pull: The trigger on the Sig Sauer P365 CO2 Blowback BB Pistol is a single action only trigger so you will need to rack the slide to cock the trigger and internal striker, after which the blowback operation will do this for you. When the Sig Sauer P365 CO2 Blowback BB Pistol is unloaded the trigger pull length is short and the trigger weight is fairly light. That said when you load the full size drop out magazine with steel 4.5mm BB’s, the trigger pull weight increases significantly. This is because the inner barrel comes back and into the magazine when the trigger is pulled allowing for a better seal between the barrel and magazine which increases power and CO2 efficiency. The drawback to this is more friction on the trigger when you pull it with a loaded magazine.
Accuracy: Since I have not done my Field Test Shooting Review for the Sig Sauer P365 CO2 Blowback BB Pistol, I can not comment fully on how the Sig Sauer P365 CO2 Blowback BB Pistol will perform in terms of accuracy and power. I did have the chance to shoot off a couple magazines worth of ammo in the yard shooting at some pop cans around 30 feet away and the Sig Sauer P365 CO2 Blowback BB Pistol seemed to hit them most often then not. I was a bit surprised by the snappy blowback and loud pop the Sig Sauer P365 CO2 Blowback BB Pistol made and will not be surprised if it is able to hit the claimed 295 fps velocity using a brand new CO2.
Build Quality: The Sig Sauer P365 CO2 Blowback BB Pistol has a metal and plastic (polymer) build, the slide is metal along with part of the full size magazine and I am sure several inner parts will also be metal. The frame along with section of the magazine are plastic. It’s kind of hard to tell if the trigger, safeties, slide catch and take down leavers are metal but I believe they are with the magazine release being plastic. The Sig Sauer P365 CO2 Blowback BB Pistol is not the heaviest Airgun coming in at about .8 pounds but for its size it feels good. Fit and finishes are also good.
Realism: The Sig Sauer P365 CO2 Blowback BB Pistol is a replica of the real steel Sig Sauer P365 which is a 9mm striker fired everyday cary compact pistol. It looks and feels the part with most external mechanical working parts mimicking the real steel version well enough. I was not able to easily field strip the Sig Sauer P365 CO2 Blowback BB Pistol since the takedown leaver seems to be only for show. One main difference between the CO2 Airgun and Real Steel version of the Sig Sauer P365 is the use of polymer in the frame for the Airgun version while the real steel Sig Sauer P365 has a metal frame. I imagine this is because 9mm rounds pack some punch and a small polymer frame may not have been up to the job. not something to be concerned with in a CO2 version of the same pistol.
One of the smallest CO2 BB Airgun on the market and somehow Sig managed to get a full size drop out magazine in it?
Good overall replica of the real steel P365 Sig Sauer pistol in terms of looks and operation.
Full Sig Sauer markings and licensing.
Working ambidextrous safeties and slide catch release (locks back after last shot).
Snappy blowback feel.
White and green dot sights front and back.
Rail for accessories (Maybe).
Recessed barrel opening and open ejection port for added realism.
Warning instructions are super discreet!
Cons:
SAO trigger gets a bit harder to pull when loaded up with BB’s.
Has a polymer frame as compared to the metal frame on the real steel version.
Not easily field strippable..
Comments: The Sig Sauer P365 CO2 Blowback BB Pistol was a real show stopper at this years SHOT Show, I was amazed that Sig Sauer was able to actually figure out a way to fit a full size drop out magazine that holds both the CO2 and 12 steel BB’s in such a compact Airgun. The Sig Sauer P365 CO2 Blowback BB Pistol is even small than the Walther PPK in many ways so great work by Sig in figuring out how to engineer their new Sig Sauer P365 CO2 Blowback BB Pistol. I also think the the Sig Sauer P365 CO2 Blowback BB Pistol is a great replica of the real steel version in looks, feel and function which is what we are all looking for when considering buying a new CO2 replica Air Pistol. My initial test shots went well and make me feel optimistic about how the Field Test Shooting Video will go when I make it shortly.
My Table Top Review of the Sig Sauer P365 CO2 Blowback BB Pistol:
