Some more updates for you, I received some more NcSTAR Accessories for my Canada Replica Airguns Store, some Red Dots, Scopes, Lasers, Tactical Lights, Rails, Bipods and some Vests, Slings and Holsters. I will be updating the Canada Store shortly with these very well priced items shortly so check back soon!
I also have a couple more blank guns that I will be conducting a Silent Auction on shortly: An EKOL Lady in Satin and an EKOL Special 99 in "White", which is more like a soft textured Nickel.
Lastly I also just picked up my first paintball pistol a RAM X50 and it is one I have been after for a while since I am a big Sig fan. It' basically an unlicensed Sig Sauer 226 that uses CO2 and chambers .43 caliber paintball and/or rubber balls. It is blowback and has a drop out 9 round metal magazine.
I just received some of my ASG Airsoft guns in my BC location and wanted to make an update video for you so you can see them up close and perhaps see how they stack up against their Airgun counterparts. Keep in mind many of my ASG guns are only available in the Canada Replica Airguns Store, we do have some ASG Airsoft guns for my US based customers but this time here in Canada I have more to offer my Canadian folks!
I am also super impressed with the high quality of the LMT Defender M4 Carbines, they are a serious bit of gear and have some very good heft to them, even more so than my full metal King Arms M4A1 I already sell and have done a full review of, not to take anything away from the Kings Arms product as it is very good at its price point.
I also received my first sniper rifle and have played around with it a bit to see what it is capable of. I added a bipod to the front and a 3x9 power scope as the ASG AW .308 comes pretty bare bones but ready for all you can throw at it. I can say it likes heavier Airsoft BB's, as the .20 gram ones I started with seemed to fly off in all directions due to the high velocity, even stepping up to a .25 gram BB tightened my group up significantly at 30 feet. I have heard this rifle really prefers heavy Airsoft BB's so I plan do do my review based on that information.
Enjoy my Vimeo Video Update focusing on the new ASG Airsoft lineup.
Trigger Pull: The trigger pull on the Daisy Powerline 5501 is about average, a bit long but fairly smooth and about a medium pull weight. The first part of the action loads a BB into the chamber and the second part releases the hammer which give the pistol a bit of a creepy first stage.
Accuracy: I was not impressed with how my Daisy 5501 performed in the accuracy portion of this review, it got about a 3 inch 8 shot group from 20 feet out in a semi rested position, in comparison many of my BB pistols can easily get a 1 inch grouping shooting this way. I may try a different brand of BB's even though the RWS BB's I used where of high quality, they just may have not suited this pistol? FPS velocities where a bit under the manufacturers claimed ratings but very close at a respectable average of 386 fps with my 8 shot test shooting on a somewhat cold day. Not bad for a blowback pistol!
Build Quality: The Daisy Powerline 5501 is a pretty much all metal pistol with what looks to be very good build quality. The 5501 is made in Japan, I have found most Japanese made guns to be well made in the past. The frame, slide, trigger, safety, slide catch, CO2 screw, and de-cocker are all metal and of course many of the internal parts too. The only plastic parts to speak of are the grips and the magazine. I would have liked to have seen the magazine with more metal in it but for the most part it is protected within the gun so you should be OK.
Realism:The Daisy Powerline 5501 is loosely styled after the Sig Sauer in combination with a Walther semi auto pistol. It is lacking a cut-out ejection port that would have added greatly to its realism. I would have also liked to have seen a metal magazine as it's seems a bit cheap compared to the rest of the pistol. I do like the fact that the barrel tip has a large diameter opening making the gun look more like the larger caliber weapon it is styled after. It's also one of the few BB pistols with a working de-coker on it.
The two-tone look is very nice with a stainless look to the frame.
Accessory rail makes adding a tactical light or laser easy.
Warning instructions on slide are color matched to be more discreet.
Very well designed CO2 tightening system and also well hidden.
Cons:
Did not shoot very accurately for me with the BB's I used.
Ejection port is not cut out, takes away from the realism a bit.
All plastic magazine.
No white dotes on rear sight.
Comments:
All in all I liked this Daisy Powerline 5501, other than the poor results I got in terms of accuracy using my chosen zinc platted RWS BB's, the Powerline 5501 was really very good in all other aspects. I think it is a rather nice looking gun with excellent build quality throughout with lots of metal giving the 5001 a nice 1.5 pounds weight. The Daisy 5501 had very heavy and snappy blowback while retaining decent shots per CO2 and respectable close to 400 fps real world velocities. This Daisy Powerline 5501 blowback BB pistol is priced at well under $100 making it very good value in my mind.
My Vimeo Video Comparison Review for the Daisy Powerline BB Pistol:
The STI Duty One 1911 Non-Blowback Airsoft Pistol is a full size replica of the actual STI Duty one 1911 pistol which is a modernized and upgraded version of the original classic Colt 1911. You will find features like; an integrated weaver rail for lasers and tactical lights, high rise beavertail grips, a unique serial number on each air pistol and STI licensed markings. (BUY NOW)
The ASG AW .308 very powerful spring operated Airsoft Sniper Rifle and has licensed Accuracy International AW .308 markings. Out of the box it shoots close to 2 joule and weights almost 7 pounds with its solid metal construction. The Sportline AW .308 has adjustable Hop-Up for accuracy and top rail for mounting a scope. (BUY NOW)
The ASG LMT Defender R.I.S. is a classic carbine with a few modifications. The normal front guard has been replaced with a full rail interface system (R.I.S.), that gives you plenty of opportunities to mount accessories. As the normal battery space is used by the R.I.S. the wiring to the battery goes back to the stock. The stock is a special sopmod stock with two compartments to house the battery. The functionality is similar to the other LMT ProLine models – Adjustable hop up, 1.5 joule power and semi & full auto. (BUY NOW)
The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.
Two well known firearms and accessory manufactures have joined forces to create this beauty of a Proline Airsoft AEG. The full metal Defender4 Carbine licensed by LMT upgraded with the S.I.R. rail system licensed by A.R.M.S.. A Selective Integrated Rail system (S.I.R.) offers a wide variety of options to mount tactical accessories. Quick and handy flip-up iron sights are mounted on the S.I.R. Strong and well built with what is probably one of the best out-of-the-box gearboxes, heavy reinforced with 8 and 9 mm bearings, steel gears, and ball-bearing spring-guide as well as an upgraded cylinder set. It can handle Li-Po batteries and shoots 1.5 joule (120m/s/394 fps) in semi- and full-auto mode with Easily adjustable Hop-Up. (BUY NOW)
The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.
I have another EKOL Firat Magnum blank gun for you today listed as a silent auction item, this one is a top venting model so the barrel is plugged and all the flames and smoke vent out the top of the barrel, not the front. The EKOL Firat has always been a popular seller here in the Replica Airguns Store.
This EKOL Firat Magnum 9mm P.A.K. Blank Pistol in Gloss Black is previously owned but has low usage and is in very good condition. It comes in a hard shell plastic case with the manual, and field stripping key.
Please submit your silent auction offers to me by no later than June 5th midnight! (Silent auctions are for our Canadian customers looking to by blank guns in Canada) participants can send me an email with their top bid on the item listed and the highest bid wins this auction). *Local tax plus shipping & handling will be added.
Good luck to all participants!
If you reside in the US, you can also buy the EKOL Firat new from us in our US Replica Airguns Store.
Trigger Pull: The trigger pull on the Umarex SW1911 S is actually fairly heavy which I found a bit surprising because it is a single action only gun. I found myself thinking a few times that the gun may have misfired but realised that I just needed to pull the trigger a bit firmer. This can be good in that the gun will not easily or accidentally go off and since accuracy is not a factor it is not a big deal.
Accuracy: NA.
Build Quality: The overall build quality of the SW1911 S is fantastic. It is one of the nicest blank guns in terms of overall build quality and finish quality. The tolerances are very tight and the quality of the workmanship is top notch. When holding the Umarex SW1911 it has a lot of mass to it and feels just like a real 1911 in the hand. This blank pistol is made in Germany!
Realism:The Umarex SW1911 S is a replica of a Smith and Wesson 1911 semi auto pistol but I could not find an exact match to a specific model they currently make. It is licensed and branded by Smith & Wesson and in terms of looking like a real steel gun it is bang on with the exception of the exhaust notch that is cut into the top of the slide. Interestingly enough I think Umarex may have not even needed to cut out this notch as my slow motion video shows that all the burn off happens before the slide even starts to move.
Very well made, materials fit and finish is all very good.
Two-tone finish looks very nice.
Very true to the original 1911 - (A1 styled).
Love the nice rubber wrap around grips.
I was able to fit 10 rounds in the magazine (2 extra)!
German made quality.
Cons:
Top venting.
Notch cut out of slide takes away from the realism a bit.
Magazine can be a bit tuff to get in (pressing the magazine release helps).
Heavy trigger pull on mine.
Comments:
Even though the Umarex SW1911 S had a few shortcoming like being a top venting gun, having the notch cut out of the slide and perhaps a bit heavy of a trigger, I still really like it! The quality is evident throughout this fine German made blank gun and you can just tell it's made right. This is also my first true replica blank gun as it is fully licensed by Smith & Wesson, something that has been lacking in all my other blank guns because of our Canadian importation laws. I really wish I could get my hands on some more "replica blank guns" as I don't mind giving up the front firing for top venting to obtain a blank gun that is a true replica.
As promised, the new ASG Airsoft Pistols have been added to the Replica Airguns Store and by the way none of them have the orange tip as they are all classified as Uncontrolled Firearms just like a standard Airgun!
Dan Wesson Airsoft Revolvers:
The legendary revolvers licensed by Dan Wesson These revolvers have authentic markings and an individual serial number stamped into the frame. The revolvers features a single and double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson BB revolvers are made of metal except for the ergonomical grip constructed in hard ABS plastic.
The 12g CO2 cartridge is stored under the grip and is easily accessed by sliding the grip to the side – easy-load style. Each of the 6 cartridges holds one Airsoft BB and is placed in the metal drum that rotates as each round is fired. The revolvers comes with a speed loader, changeable tactical rail and 6 cartridges.
The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer Česká zbrojovka, Czech Republic. This is the semi automatic 4.5mm airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the Airsoft BB’s are put in the drop-out magazine.
The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number.
The ASG Steyr M9-A1 Non-Blowback CO2 6mm AIrsoft BB pistol is a faithful copy of the real model Steyr mannlicher M9-A1 complete with licensed trade marks and a functional safety pin. You will get over 465fps shots from the 14 round drop out magazine and just like the real steal you can add a laser site or tactical light to the weaver style accessory rail.
Just a quick heads up for our Canadian customers waiting on Dan Wesson Revolvers, the ASG Airguns and some Airsoft guns have now cleared customs, we still have some more Airsoft guns from ASG coming down the road but at least we have some to start with for now.
PLEASE KEEP IN MIND that we have a very large backorder list and we will be doing our best to send out the backordered Dan Wesson starting tomorrow. It will take some time to get caught up so please try to avoid sending us an email about your backordered Dan Wesson, we are working very hard to get them to all of you and will update everyone with a tracking number as soon as yours ships.
If you are interested in some of the ASG Airsoft guns then make sure to check back over the next few days as I update our Airsoft guns section or our Canada Replica Airguns Store with the new ASG Airsoft items.
Photo of ZORAKI 917 Removed by Request from Glock "Renzulli Law Firm"
All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"
When ever I can get my hands on some blank guns at a realistic price or perhaps a trade that works for both parties, I generally try to make it happen. And if they are guns that I don't have in my collection, well they go directly into my collection so please no offers from fellow Canadians as I tend to hold onto my more rare or hard to acquire Canadian replica guns pretty firmly! .
Both of these 9mm P.A.K. Blank shooting guns are not brand new but they are in very good condition and it's hard to even say it they have been shot or not? My new Zoraki Mod. 917 as you can see, is styled very closely after the NAME REMOVED and so much so that all new version sold in North America must have "This is not a Glock" engraved on the right side frame of the receiver in order to be sold. Mine however was purchased before this requirement :) UPDATE: NO LONGER BEING SOLD IN NORTH AMERICA.
Photo of ZORAKI 917 Removed by Request from Glock "Renzulli Law Firm"
My Umarex SW1911 S is licensed by Smith & Wesson which makes it pretty hard to get in Canada becasue for a very long time we have not been allowed to import any replica guns and since it is licensed it makes it a true replica and would normally be stopped at the boarder. You may own replicas in Canada without a said license but you need to make sure they are stored and handled as defined by the requirements outlined in the Canada Firearms Act.
We have been waiting a while here in Canada for some of our ASG products to come back in stock. ASG provides us with our Dan Wesson line and the Dan Wesson Revolvers have been a very popular airgun to say the least. We did manage to get a few of them, mainly to fill some of the earlier back orders but this big order had to come by cargo ship and now it has arrived and has been with Canada customs for about a week so we should be close to having them for you!
The hold up on this shipment is because we have some ASG Airsoft guns in with the regular Airguns which is good news as we will soon be stocking some very nice ASG Airsoft Pistols and Rifles but the new Airsoft guns are the main reason that Canada Customs is taking their time giving their OK on this shipment.
My advice to anyone who has been waiting a long time for their Dan Wesson Revolver (Mostly the 2.5 & 4 inch versions) is to hold on a bit longer because the wait is almost over and we will sell out of these guns quickly so having your backorder in guarantees you will get yours.
I have a very popular blank gun for you today and I'm sure it will get a lot of activity as the EKOL Firat has always been a popular seller here in the Replica Airguns Store.
This EKOL Firat Magnum 9mm P.A.K. Blank Pistol in Gloss Black is previously owned but has low usage and is in very good condition. It comes in a hard shell plastic case with the manual, flare adaptor and field stripping key.
Please submit your silent auction offers to me by no later than May 23rd midnight! (Silent auctions are for our Canadian customers looking to by blank guns in Canada) participants can send me an email with their top bid on the item listed and the highest bid wins this auction). *Local tax plus shipping & handling will be added.
Good luck to all participants!
If you reside in the US, you can also buy the EKOL Firat new from us in our US Replica Airguns Store.
Time is runnig out! Just in cased you missed my EKOL Arda & Dicle - Bruni Mod. 92 PAK Blank Gun Silent Auction video last week or perhaps didn't get a chance to bid on anything, this is your last chance as this silent auction ends tonight at midnight (Friday May 11th).
You can check out the original post and watch my YouTube video for these items located here.
I've been talking a lot about some blank gun offering for my Canada based customers and I didn't want to leave out my US located customers. So I've added a few 1911 styled blank pistols to the Replica Airguns US Store. Now keep in mind these 1911 blank guns are all top venting but they still function and field strip much like a real gun!
I don't usually do this but I am looking for a Retay Baron HK Blank Pistol, I know there are a few of them out there in Canada and I have a very good customer who I am trying to help out with this. If you have one and you are willing to sell it to me, please Contact me with your asking price!
It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...
I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.
I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!
I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.
Here are some of the guns that I will be reviewing over the next while...
Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)
Another great opportunity for some of my Canadian based customers to get yourself a blank firing gun here in Canada. Today I bring you three models, two front firing blank pistols from EKOL in Gloss Black (Arda and Dicle) and one Italian made top venting Bruni Model 92 in Chrome.
Lastly we have a stunning Bruni Mod. 92 in Chrome:
Top venting.
8mm P.A.K. blanks.
15 round capacity.
Single and double action.
Comes with hard case.
Excellent condition!
All these guns are up for silent auction and this is how it works:
Send me an email with your top price as you will be bidding against others for the top offer. (Taxes and shipping will be added to your bid)
If you want more than one of these blank guns, please bid on each gun individually.
You have till Friday May 11th midnight to get your top bid in place.
Once the top bidder has been selected I will send them an email to notify them that they are the top bidder and Payment will be required within 24 hours or the next top bidder will be selected and notified.
Materials: Plastic (polymer) and some metal construction.
Weight: .92 pounds.
Barrel: 4.5 inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 shot full size drop out magazine.
FPS: 410.
Trigger Pull: The trigger pull on the Umarex Browning Hi-power Mark III is not too bad but has more resistance when the BB magazine is full as the first part of the trigger pull is dedicated to advancing a BB into the BB chamber, this is true in both single and double action. Shooting the Browning Hi-power in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull and as you can see in my shooting results the trigger did not effect the accuracy negatively at all!
Accuracy: Excellent for a BB shooter I shot a 1 inch 7 shot group from 20 feet out in a semi-rested position and this is was with open sights! I also shot freehand in double action, shooting quickly and also got a very respectable 2.5 inch pattern that represented an additional 36 shots. When it came to FPS performance the Umarex Browning Hi-power Mark III was a bit lower than claimed which is not unusual with most airguns (369 fps averaged 8 shots). The Umarex Browning Hi-power did get well over 100 shots per CO2 but I would have given up a few shots for a bit more power.
Build Quality: I would have liked to have seen this air pistol replica use a lot more metal and perhaps some more working parts. As is it is mostly plastic and very light weight but the fit and finish are good overall and the gun should work just fine and hold up over time.
Realism: The Umarex Browning Hi-power Mark III is a licensed replica of the actual Browning Hi-power Mark III semi auto pistol. It is a very close "looking" copy in almost every way. I like the fact that there are no side screw holes that you find in many plastic moulded BB pistols and the Browning Mark III has a working ambidextrous safety and magazine release just like the real Browning Hi-power Mark III. The let down here is in the .92 pound weight of the Browning BB version, it just doesn't have that "gun like" weight to it which makes it feel a bit cheap. I would have really liked to see this BB pistol in all metal and with a working slide, and I would not have minded to pay extra for the upgrade in materials.
Mostly plastic which makes the gun feel kind of light weight.
No working slide.
Could have just a bit more power even at the expense of less shots per CO2.
No white dots on the sights?
Comments:
The Umarex Browning Hi-power Mark III BB CO2 pistol is a very good replica of the real steel version of this gun and in terms of "looks" alone does a good job making this pistol very believable. Now once you pick it up, you know it's not the real deal because of the plastic build and much lower weight. So with that out of the way, let's talk a bit more about what I did really like about the Browning Hi-power Mark III! I liked the excellent accuracy, easy to load and use full size drop out metal magazine not often found in a low price airgun like this, and I also like the fact that there are no screw holes on the side of this gun found in so many plastic and even some metal BB guns. So overall the Browning Hi-power Mark III is a good overall replica, has excellent accuracy and is really the only Browning Hi-power available in an airgun that I know about.
My Vimeo Table Top & Shooting Review for the Browning Hi-power Mark III BB CO2 Pistol:
These are ones that where sold and came back to us with faulty hammers, the hammer was sliding off the release which is a bad thing. They have all been fixed and are in perfect working condition now and all of these guns have seen little or no actual use!
Here are the specifications:
9mm P.A.K blanks
8 round magazine
1.7 pounds
Semi auto
Single and double action
Front firing
These EKOL Special 99's come in a case with a manual and flare adaptor.
Of course if you live in the US you can buy an new one just about any time from our US Replica Airguns Store.
I wanted to make a quick video to showcase a few items I will be reviewing and some of which are also for sale in the Replica Airguns Store.
First off we have a few of the new front firing Kimar Model 85's (Orange Slide) left in Canada. I stated out with 9 and I am not down to 3 so hurry on this one if you want one in Canada. If you are in the US, I also have them for sale in my US Replica Airguns Store in both Black and Nickel.
Next up I just wanted to show you a Kimar Lady K that will show up some time down the road in a video review, this item is now in my personal collection and sorry it is not for sale in either my Canada or US store at this time.
I have had lots of requests to review the Daisy Powerline 5501 and to be honest I have wanted to get this one for some time and even though it is available for sale in our US Replica Airguns Store I have not had the opportunity to pick one up until now so look forward to that review again some time down the road...
Last but not least I wanted to give you a closer look at the new Turkish made high powered Webley Tempest I have available in the Canada Store, these ones shoot as hard as legally possible within our Canada limitation to be classified as uncontrolled firearms and they make great compact pest control pistols that you can keep handy for when required.
OK, so that's it for now and be sure to watch the full reviews of these guns when I get to them shortly!
The classic Webley Tempest is now available in the Replica Airguns Canada Store and let's set the record straight right from the start. This is a the latest made in Turkey version and it really smokes! From most peoples reviews the fit and finish are comparable to previous versions and we will just have to take their word for it as I have never had a Webley Tempest to compare one to? I can tell you the new Turkish made Webley Tempest is very well made air pistol and when it comes to power this gun take it right to the edge in terms of what is legal as an unregulated airgun in Canada.
I tested both the .177 caliber and .22 caliber Webley Tempests and they both shot very hard, keep in mind, with added velocity there is also added cocking effort and the .22 caliber definitely uses a stronger spring as it also has more energy behind the fast moving .22 caliber pellets. The .22 is not for everyone because it take a lot for work to cock this bad boy!
These are the results I got shooting the Webley Tempests using my Chronograph:
.177 Caliber
6.9 grain pellets used
499 fps
3.8 foot pounds
5.2 Joules
.22 Caliber
11.9 grain pellets used
400 fps
4.2 foot pounds
5.7 Joules
Here is some more info on the new Turkish Webley Tempest:
This is the latest and most powerful (made in Turkey) version of the original barrel over cylinder design that made Webley pistols world famous. Positively locked barrel using the famous Webley revolver type stirrup.
The Webley Tempest is a spring-operated, single shot; break barrel air pistol fitted with a precision-rifled barrel primarily suited to waisted lead pellets. The gun is available in either .177 or .22 caliber. The gun incorporates many additional design features, which include: adjustable trigger, manual safety catch (i.e. selective use), adjustable rear sight with vertical and horizontal adjustment. Handle is designed to fit the hand, with a thumb rest and checkered grips.
