View fullsize

Type: BB Rifle.
Manufacturer: Air Venturi.
Model: HellBoy.
Materials: Metal & plastic.
Weight: 5.2 pounds (2.4 kilograms).
Barrel: 14.5 inches, smooth bore.
Propulsion: 12 gram CO2 single cartridge.
Action: Non-Blowback - double action only.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 rounds.
FPS: 495fps.

View fullsize

Trigger Pull: The trigger pull on the Air Venturi HellBoy M4 CO2 BB Rifle is a double action only trigger since there is no blowback action to set the trigger in single action mode. So it will be a bit heavier than a true single action trigger. That said the trigger is not bad at all and can be activated very quickly for tons of fast action shooting or at least until your 18 rounds are all gone :) I would say the trigger pull is between light and medium with a medium pull length and not that much take-up at the beginning.

Accuracy: So far I have only played around with the Air Venturi HellBoy M4 CO2 BB Rifle shooting at clay pigeons from various distances and it was surprisingly accurate for me off hand shooting like this. I could easily hit a clay pigeon from about 50 feet away with most shots. Watch my "Having Fun with the Air Venturi HellBoy M4 CO2 BB Rifle" video if you want to see how it did. In terms of velocity, I have seen other reviews that show it getting pretty close the 495 fps claimed so until I do my actual Field Test Shooting Video we will have to go on this info.

View fullsize

Build Quality: The Air Venturi HellBoy M4 CO2 BB Rifle is made in China, some people will not like that but I found it to be very well built in general, fit and finish are as good if not better than any Taiwanese airgun I have reviewed so quality control in the factory must be good. You are going to find metal parts where you would expect them to be on a real M4 (AR) like the receiver, barrel, buffer tube, magazine, carry handle, forward assist, charging handle, sling mounts, safety and magazine release. Plastic parts are going to be the rear stock, hand guard, and pistol grip.

View fullsize

Realism: The Air Venturi HellBoy M4 CO2 BB Rifle is a 1 to 1 replica of the M4 or AR platform and even has some interchangeable parts with real AR or M4 like the hand guard and rear stock. You can even take this gun down into the two halves, upper and lower which makes for barrel cleaning or BB jam removal pretty easy. Even though there is no blowback action or internal bolt, you can pull the charging handle back which opens the dust cover just like the real deal. Other working moving parts are the magazine release, selector switch, forward assist and adjustable rear stock.

View fullsize

Pros:

• Great to have another full size Rifle available to purchase in a BB gun version.

• Metal where it is expected and good overall weight. (Metal receiver, barrel, magazine)

• Can be field stripped, carry handle is removable.

• Can swap out hand guard and rear stock with real steel AR parts.

• Full size drop out metal magazine that holds the BBs and CO2.

• Great looking replica of the real steel M4 AR, operation and weight.

• Variety of sling mount hook in points for varies styles of slings.

• Fully adjustable rear sight with duel apertures.

• Working, dust cover, forward assist, magazine release, selector switch.

• Price point is reasonable for this type of full size mostly metal BB rifle.

Cons:

• Semi auto and double action only trigger only.

• Magazine only holds 18 rounds and a single CO2.

• No blowback operation.

View fullsize

Comments:

I think the Air Venturi HellBoy M4 CO2 BB Rifle is a super addition to the replica rifle lineup. I know we all wish it had blowback operation and shot in full auto mode too but there are trade-offs here and you can still have boat loads of fun shooting the Air Venturi HellBoy M4 CO2 BB Rifle even in semi auto only mode. The fact that it does not have blowback allows for some generous fps velocity and more shots per CO2. It looks really great, feels really great and shoots really great all in a mostly metal build which is what everyone has been asking for and at a reasonable price. I think the Air Venturi HellBoy M4 CO2 BB Rifle is a total winner and recommend it 100%. You will not be disappointed!

• My Table Top Video of the Air Venturi HellBoy M4 CO2 BB Rifle:

• Buy the Air Venturi HellBoy M4 CO2 BB Rifle in Canada

• Buy the Air Venturi HellBoy M4 CO2 BB Rifle in the US

View fullsize

It's been a while since I made a just for fun shooting video, especially a multi-camera kinda tactical shooting video. Well the weather was nice, I had the perfect CO2 Air Rifle for the job, the Air Venturi HellBoy, and I need to keep things simple since I am in contest prep for a fitness show I am doing this weekend and being so low on calories and high on activity messes with the brain a little bit which makes it hard to focus.

View fullsize

This all made for the perfect opportunity to get outside the the Replica Airguns indoor Sea Can Airgun Shooting Range and shoot my Air Venturi HellBoy CO2 BB M4 at some different targets.

To make this video as interesting as possible I have several cameras setup to capture the action from multiple angles. So watch me have some outdoor fun with the Air Venturi HellBoy M4 CO2 BB Rifle as I slay as many clay pigeons as I can...

• Buy the Air Venturi HellBoy M4 CO2 BB Rifle in Canada

• Buy the Air Venturi HellBoy M4 CO2 BB Rifle in the US

View fullsize

In this table top preview video I take a look at three new products from Air venture that we are now carying in our Online Replica Airguns Store.

View fullsize

First off is yet another rebranded KWC 1911 CO2 Blowback BB Pistol, this time with John Wayne Licensing in the classic 1911 A1 version with a distressed look. What can I say, people just can't get enough of these KWC 1911's and with all the choices out there you are sure to find something you like!

View fullsize

I then show you around a new Competition Target Pistol called the V10. The Air Venturi V10 Competition Target Pistol shoots .177 caliber pellets at around 400 fps with only a single pump! The Air Venturi V10 has adjustable sights, trigger and even the grip is adjustable. I am expecting some decent actuary out of this one...

View fullsize

Last up but perhaps the most unique product from Air Venture is the HellBoy CO2 BB Firing M4 Air Rifle. The Air Venturi HellBoy has an all metal receiver, magazine, carry handle, buffer tube and barrel with only plastic used for the stock and fore grip which is to be expected. The Air Venturi HellBoy shoot in semi auto only with a double action style trigger and does not have blowback action. You can expect to get 18 4.5mm Steel BB's in the all metal magazine that holds the CO2 as well and a top velocity of 495 fps. Did I mention you can fully field strip the Air Venturi HellBoy?

View fullsize

The Sig Sauer We the People 1911 CO2 Blowback BB Pistol is really simply another KWC rebranded and license 1911 and I have already made a tone of videos on the KWC 1911 for guns like the Cybergun Tanfoglio Witness 1911, Swiss Arms 1911, several Umarex KWC 1911 rebrands and a bunch of Cybergun Rail Gun versions. So why make another Field Test Shooting video? Well Why not and at the end of the day the KWC 1911 BB / Airsoft Pistol has been one of our top sellers over the last several years for the time when it came out.

View fullsize

Getting back to the Sig Sauer We the People 1911 CO2 Blowback BB Pistol Field. It really is a beauty and I think it's the only one with metal grips! So how did it shoot? In terms of Velocity it shot just like all the other KWC 1911 Co2 Blowback BB pistols and averaged right around 320 fps, not super fast but perfectly fines for an action pop can plinker. I was using a brand new CO2 and did place 5 shots through my Chronograph of this  test result. The temperature in my indoor  shooting Sea Can Airgun Range was about 17 degrees Celsius or 63 degrees Fahrenheit.

View fullsize

When it came to accuracy these KWC 1911's usually get anywhere from a 2-4 inch 10 round grouping and the Sig Sauer We the People 1911 CO2 Blowback BB Pistol was no excepting shooting about a 4 inch group. My first 4 rounds did all hit the 1.5 inch bullseye so perhaps the following 6 where on me :) Even so a 4 inch grouping at 30 feet back is good enough to punch holes in pop cans all day long.

View fullsize

I do really like the Sig Sauer We the People 1911 CO2 Blowback BB Pistol, it's perhaps one of the most unique and eye catching of the bunch with its distressed and black highlight features. The white dot sights, metal star pistol grips and skeletonize trigger are also great touches. If you can find a Sig Sauer We the People 1911 CO2 Blowback BB Pistol in your area for sure pick on up, we also have a tone of other version of the KWC 1911 CO2 Blowback Airgun in Steel BB and Plastic Airsoft over in our Replica Airgun Online Canada and US Stores...

Buy the “We The People” BB Pistol in Canada - Buy the “We the People” BB Pistol in the US

View fullsize

You may remember back at SHOT Show this year I showed everyone some new products from Sig Sauer, well two of those pistols showed up for me to review so why not start off with an Unboxing before I get into the full Table Top and Shooting reviews.

View fullsize

The two pistols I received from Sig are the Sig Sauer X-Five ASP CO2 B blowback Pellet Pistol and the We the People 1911 Co2 Blowback BB Pistol. Sig was also kind enough to send me out some of their 12 gram CO2 and Match Ballistic Alloy Pellets to use with these Airguns.

Here are some of the basic specifications for both of theses fine Airguns...

View fullsize

Sig Sauer X-Five ASP CO2 B blowback Pellet Pistol:

• Distributer: SIG Sauer

• Caliber: .177 cal. Pellets

• Velocity: 430 fps

• Action: Semi automatic Blowback SAO

• Barrel Style: Rifled

• Gun Weight: 2.7 Pounds

• Overall Length: 8.7 Inches

• Barrel Length: 5 Inches

• Magazine Capacity: 20 Rounds

• Mechanism: CO2 12 Gram

• Trigger Pull: 5.5 Pounds

View fullsize

We the People 1911 Co2 Blowback BB Pistol:

• Distributer: SIG Sauer

• Caliber: .4.5mm Steel BB

• Velocity: 340 fps

• Action: Semi automatic Blowback SAO

• Barrel Style: Smooth bore

• Gun Weight: 2.2 Inches

• Overall Length: 8.5 inches

• Barrel Length: 4.5 Inches

• Magazine Capacity: 17 Rounds

• Mechanism: CO2 12 Gram

Watch my full Unboxing Video for the Sig Sauer X-Five ASP and We the People 1911 Airguns:

We often think that something that is more expensive and perhaps built with what we consider to be better materials is going to be the best option. That's not always the case! In this Vimeo Video I talk about some of the Pros and Cons to buying a Plastic Airgun versus a Metal Airgun. Of course this applies to BB, Airsoft and Pellet shooters.

Price
In most cases a Plastic Airgun is going to be less expensive, so if you have limited funds then your only option may be a Plastic Airgun and at the end of the day both airguns are going to probably get the job done much the same.

Realism
Generally speaking, most Metal Airguns are going to have more moving parts, often times with working slides and even blowback operation. This is not always the case but even a Metal Airgun that has few working parts will still feel more realistic simply because of the additional weight to the Airgun. Metal has that cold hard feel to it that makes you feel like you're holing something of substance. Plastic Airguns on the other hand can feel light and cheap and usually are very simple in design with less working parts.

Shooting an Airgun with blowback operation simulates the recoil action and in many cases allows for true single action operation of the trigger and hammer. This is going to feel a lot more realistic than shooting a non-blowback Airgun which again is generally what you get with Plastic Airguns.

Durability
Most people assume that because an Airgun is Meta, it is going to be stronger and more durable. This would be true if the Metal used in the Airgun was actually hardened steel but with almost Metal Airguns, they are made using a zinc alloy metal (Pot Metal) that is much softer then hardened steel and can wear and break a lot easier. When you also consider a Metal Airgun is going to be a lot heavier than a Plastic Airgun, a drop onto a hard surface will have a lot more impact which can cause breakage a to a heavy Metal Airgun versus a Plastic light weight Airgun.

Plastic surfaces are also a lot less prone to showing scratches since the Plastic material will usually be black all the way through versus a Metal Airgun that has a painted surface that when scratched hard enough will show through right to the bare metal. You also get wear marks on painted Metal Airguns that will make it look used and older, some people like this look but other do not.

Reliability
Again people are going to assume a Metal Airgun is going to be more reliable simply because it has more metal parts and metal parts are stronger right? Not the case if the parts are made out of zinc alloy. Now some companies will upgrade some high use parts in Airguns to hardened steel but it's hard to know for sure. You can use a magnet to determine what parts are Metal and what parts are hardened steel.

As we mentioned before, Plastic Airguns are generally pretty simple in design, less working parts means less to go wrong at the end of the day so just because you have a Plastic Airgun it doesn't mean it's going to break on you quickly. Actually it may even outlast your Metal Airgun since all those working parts will eventually wear out.

Now I am the first person to admit that I prefer Metal Airgun over Plastic Airguns, I don't mind spending the extra money for more realism and I'm willing to accept the fact that it's not going to last forever but the fact remains, a Plastic Airgun does have some advantages going for it so don't rule them out completely.

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

View fullsize

I got the chance to Field Test another 4.5mm Steel BB Air Rifle. Most of the time I'm testing out pistols so the opportunity to shoot some rounds through a rifle is a nice change. Todays Air Rifle test subject was the ASG TAC-4.5 CO2 BB Air Rifle and by the way it also comes in a 6mm Airsoft version called the ASG TAC-6 CO2 Airsoft Rifle. Maybe down the road I will see how the 6mm Airsoft version compares to the 4.5mm Steel BB version...

View fullsize

Right out of the get go the ASG TAC-4.5 CO2 BB Air Rifle surprised me with some rather high velocity shots going through my Chrony Chronograph. The highest FPS shot getting up to 538 fps and the slower shot which was the 5th shot slowing down a bit to 485 fps. My 5 shot average was still up and over 500 fps at 514 fps.

View fullsize

If you're worried about the ASG TAC-4.5 CO2 BB Air Rifle being legal as an unregulated firearm in Canada, there is no need to be concerned since the 500 fps limitation also requires a foot pound energy of over 4.2 foot pounds for the airgun to require a firearms license (both thresholds must be met). A 4.5mm steel BB weighs in at around 5.1 grain and even with the fastest shot of 538 fps, the foot pound energy would only be 3.28 foot pounds so nope, no PAL required.

View fullsize

OK so the ASG TAC-4.5 CO2 BB Air Rifle has some decent power, what about accuracy? Again the ASG TAC-4.5 CO2 BB Air Rifle came through with flying colors! I was able to get about a 1 inch 10 shot grouping even though I was struggling to use the peep sight. My old eyes really find it hard to focus using a peep sight. I would suggest a red dot or even a low powered optical scope since the ASG TAC-4.5 CO2 BB Air Rifle has a rail for this purpose. I did find that the ASG TAC-4.5 CO2 BB Air Rifle shot a little bit low and slightly to the right. This can easily be corrected by adjusting the rear iron sight since it has windage and elevation settings.

View fullsize

The ASG TAC-4.5 CO2 BB Air Rifle would really be a great plinker even shooting objects at ranges up to 50 feet you should still be able to nail a pop can with no problems. The double action trigger is a bit long and not the lightest I have used but you can still get shots off fairly quickly. Make sure to also checkout my Table Top Video for more details and specifications along with somer nice closeup video.

View fullsize

Type: Airsoft Rifle.
Manufacturer: KJWorks.
Model: M700P.
Materials: Metal with textured synthetic stock.
Weight: 7.8 pounds (3600 grams).
Barrel: Smooth bore barrel.
Propulsion: Gas operated (Green Gas or propane).
Action: Bolt..
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 10-11 round metal magazine.
FPS: Up to 550fps.

Trigger Pull: the trigger on the KJWorks M700P Gas Bolt Action Airsoft Rifle is what you would expect from a bolt action style hunting/sniper rifle. The working of the bolt does most of the work for your trigger finger so all that is required is the release of the firing pin from a very short and light tigger.

View fullsize

Accuracy: Checkout my full field test shooting video for the KJWorks M700P Gas Bolt Action Airsoft Rifle to see how it performed in detail. I did only shoot it inside the Sea Can shooting range since the weather outside this time of year is not favorable especially for gas guns so I was limited to ab out 30 feet, perhaps I can retest the KJWorks M700P Gas Bolt Action Airsoft Rifle outdoors at longer ranges when the weather is better. That said the KJWorks M700P Gas Bolt Action Airsoft Rifle did shot about a 1.5 inch shot grouping and averaged about 400 fps using .20 gram Airsoft BB's.

View fullsize

Build Quality: The KJWorks M700P Gas Bolt Action Airsoft Rifle is well built all around and the fit and finish feel good. all the mechanical parts functioned without any problems and I do like the textured stock and nice rubber butt pad. I did notice a couple of spots on the textured stock where it there where cosmetic imperfections, perhaps this is form the moulding of it?

Realism: The KJWorks M700P Gas Bolt Action Airsoft Rifle is based around the Remington 700 platform which looks like your standard high powered hunting rifle. The Airsoft version looks and functions just like the real deal since we are using Green Gas rather than a spring making the bolt easy and smooth to operate.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Bolt is super easy to use compared to a Spring style bolt action Airsoft rifle.

• Textured stock feels great.

• Lots of sight option with the built in scope rail and removable adjustable iron sights.

• Ready for Bipod or sling.

• Full size drop out metal magazine that holds the Gas and Airsoft BB’s.

• Easy to adjust Hop-up screw.

Cons:

• FPS was a little bit lower than expected.

• Was not able to get 11 rounds into the magazine.

• Some imperfections on the textured stock.

View fullsize

Comments:
I have revised a couple of spring bolt action Airsoft rifles in the past and although it's nice that all you need is a bag of Airsoft BB's and your ready to shoot, having the Gas operation makes the bolt so  much easier to operate allowing for much quicker follow up shoots. The more time you have to acquire your next target and make the shot can make all the difference when your enemy is closing in. The KJWorks M700P Gas Bolt Action Airsoft Rifle is a nice ready to shoot out of the box Airsoft rifle that if you want to can be customized pretty easy with a bipod or scope which I would recommend since not only will this make the KJWorks M700P Gas Bolt Action Airsoft Rifle look a lot better but also way more practical.

My YouTube Table Top Review Video for the KJWorks M700P Gas Bolt Action Airsoft Rifle:

View fullsize

This John Wayne Lil Duke Giveaway didn't go exactly as planned as we had that YouTube Airgun Channel scare shortly after the original announcement so not as many people knew about it but we said we where going to giveaway two John Wayne Lil Duke BB Rifles and so that's what we are going to do!

Make sure to watch my Youtube video and find out if you won or not and congratulations to the two winners! For those that did not win this time around, you can still get yourself a John Wayne Lil Duke BB Gun by heading over to our Replica Airguns Canada or Replica Airguns US online web store and purchasing one the conventional way!

View fullsize

Type: BB Rifle.
Manufacturer: ASG.
Model: TAC 4.5.
Materials: Plastic with some internal metal parts.
Weight: 3.5 pounds (1588 grams).
Barrel: 12 inches, metal non-rifled.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 21 round metal stick magazine.
FPS: 417.

View fullsize

Trigger Pull: The double action only type trigger pull on the ASG TAC 4.5 CO2 Air Rifle is not too heavy but it is rather long so really quick rapped fire shooting will require some finger work. The trigger reset is right at the begging of the pull so you need to make sure you allow the trigger full range of motion or you may miss the odd shot.

View fullsize

Accuracy: I haven't done my Field Test Shooting video just yet for the ASG TAC 4.5 CO2 Air Rifle but hope to do it soon so stay posted for that video. ASG claimed the fps to be right around 417 but I have a feeling it shoudl come in a little bit higher than this since there is no blowback and the barrel is close to 12 inches long, With the fiber optic front sight and fully adjustable rear peep sight I shoudl be able to get some decent rounds on target downrange and hopefully get a nice grouping.

View fullsize

Build Quality: The ASG TAC 4.5 CO2 Air Rifle is mostly plastic but feels pretty good in the hand with decent fit and finish. There are some metal internal part along with the outer barrel but for the most part the ASG TAC 4.5 CO2 Air Rifle is all plastic including the trigger and front and rear sights.

View fullsize

Realism: The ASG TAC 4.5 CO2 Air Rifle is not a replica of any modern rifle that I know of but it does look a bit like a Beretta CX4 Storm especially the back half of it. The flash hider and top and bottom raise add to the realism.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Very customizable with rails top and bottom.

• Comes with a rather nice Bipod.

• Front and back Iron sights are very usable.

• Safety switch is in a great location for right handed shooters.

• Integrated laser add on is a nice touch.

• Solid construction.

• Rubber Butt Pad is nice and thick.

• Removable barrel to reduce size for easier transportation.

• Also come in Airsoft version.

View fullsize

Cons:

• DOA Trigger pull is a bit long which will slow down rapid fire shooting a bit.

• Mostly Plastic Polymer build.

• Why not a longer inner barrel for possible more fps?

View fullsize

Comments:
It's nice when a new action shooting air rifle comes out on the market since there are not a ton of them. The ASG TAC 4.5 CO2 Air Rifle is a nice addition if you're looking for a BB shooter for plinking around the yard. You can also get an Airsoft firing version too called the ASG TAC 6 CO2 Airsoft Rifle if you want to shoot some rounds that are a little bit less destructive and more game friendly. The ASG TAC 4.5 CO2 Air Rifle offers a lot of customizability with its top and bottom rails for accessories which allow for the placement of the included removable iron sights and Bipod. I would recommend adding a red dot sight and perhaps even a tac light to really dec out this modern looking air rifle.

My Vimeo Table Top Review Video for the ASG TAC 4.5 CO2 Air Rifle:

View fullsize

Hopefully we are back in business after the YouTube Attack on Airgun channels. I'm still waiting for YouTube to get back to me on the video that they put a strike on. I did appeal the Strike but so far YouTube has not responded...

We must push forward and so here is my first video back and it's a good one! If you haven't already watched my Table Top Review of the Umarex SA10 CO2 Blowback Pellet and BB Pistol, make sure to check it out for details and some nice up and close video of this fine dual ammo CO2 air pistol.

View fullsize

As always during my indoor Sea Can Field Test Shooting videos, I first test out the velocity of each gun. Since the Umarex SA10 CO2 Blowback Pellet and BB Pistol can shoot both 4.5mm Steel BB's and .177 caliber pellets I tested both ammo types using my Chrony Chronograph. I fired three shots of each ammo to get an average fps velocity. Interestingly the heavier 6.9 grain lead pellets had the higher average velocity of 376 fps versus 304 fps with 5.1 grain Steel BB's. I have a feeling the lead pellets fit the barrel more snug and did not let any of the CO2 blow by creating more back pressure and a higher velocity.

View fullsize

After my velocity test I proceeded to find out which ammo type was going to be more accurate with the Umarex SA10 CO2 Blowback Pellet and BB Pistol. Since each rotary magazine holds 8 rounds it made sense for me to put 8 shots of each ammo type into the paper target setup 30 feet away. Keep in mind the Umarex SA10 CO2 Blowback Pellet and BB Pistol has a riffled barrel best suited for lead pellets so going into this test I was expecting the pellets to be the clear winner here.

View fullsize

I was able to get about a 2 inch 8 shot grouping using .177 caliber lead pellets with the Umarex SA10 CO2 Blowback Pellet and BB Pistol. All shots where fairly well centered but I did notice that most shots actually hit all within a very tight 1/2 inch group with 3 shots coming out a bit and extending the grouping more or less vertically. Switching up the ammo to steel BB's and as expected the groupings extended to about 3 inches with one outlier hitting very wide for some reason? Even with the steel BB's shot placement on the target was well centered in general.

The blowback on the Umarex SA10 CO2 Blowback Pellet and BB Pistol is very pronounced but does not rock your hands too much keeping this airgun on target between shots and the trigger is one of the best rotary mag type trigger I have tested to date, extremely smooth throughout the entire trigger pull. Overall the Umarex SA10 CO2 Blowback Pellet and BB Pistol has great looks, decent power and good accuracy going for it and could perhaps be one of my top pics if you're looking for a blowback pellet pistol option.

This year at SHOT Show 2018 I had the please to interview Bob from ASG yet again, Bob always has a ton of info to share about ASG new products so make sure to watch this video as it has a lot of info!

View fullsize

To summarize what Bob shared, ASG has their line of CZ P-09 and SP-01 Shadow Steel BB and Airsoft Full Blowback pistols with full size drop out metal magazines. And you'll be happy to know the Canadian CZ P-09 Airsoft version not only will have a threaded barrel but it will come with both a black and red barrel tip cover.

View fullsize

Another new air pistol from ASG is the Dan Wesson licensed none blowback pellet firing 1911, similar to what Crosman is offering that utilizes a full size drop out metal magazine combined with a two sided 6 shot rotary magazine that flips 180 degrees for a total of 12 shots per .177  caliber pellet load. the ASG Dan Wesson Pellet shooting 1911 has a nice heavy weight to it's metal slide and frame design.

View fullsize

Lastly Bob shared with us a new ASG ICS Hera Arms CQR Airsoft Rifle, this ASG Airsoft Rifle is still in the design and production state but look forward to it later on this year!

This year at SHOT Show 2018 I had the please of again interviewing Dani Navickas from Sig Sauer. Dani Showed me several new pistols and a new break barrel rifle Sig Sauer is offering this year. The Sig ASP20 Break Barrel rifle will come in both .177 and .22 caliber pellet shooting versions. The ASP20 has a lighter than most cocking effort of only 33 pounds using their proprietary GlideLite system, along with an adjustable ASP MatchLite trigger.

View fullsize

Another Target pellet airgun from Sig Sauer this year is the .177 caliber pellet shooting Super Target, styled after the Sig Sauer P210 firearm. The Sig Super Target is a single pump pneumatic single shot pistol designed for 10 meeter shooting with adjustable sights and a crips short light trigger.

View fullsize

Sig like several other companies has rebranded their own version of the KWC 1911 CO2 Blowback BB pistols. The Sig Sauer licensed BB 1911 is based on Sigs We the People line to celebrate the American people and their Constitution.

View fullsize

Another new Blowback Pellet firing Sig Sauer Air Pistol was also introduced at SHOT Show, the Sig Sauer X-Five. The X-Five uses their 20 round belt fed magazine and also has Sig's Cam Lever CO2 loading mechanism. You will also find a rear adjustable sight on the Sig Sauer X-Five Pellet Pistol.

View fullsize

Last but not least and perhaps one of the most interesting new products coming out later this year from Sig Sauer is the P320MHS APS which is another new rotary magazine Blowback Pellet Pistol. What's a bit different with the new Sig P320MHS is that it has a full size drop out magazine that holds the CO2 and belt fed pellet magazine. The P320MHS can also be fully field striped, has an open ejection port and is styled after Sig's real Steal M17 firearm.

View fullsize

Umarex presented at SHOT Show this year a license I think we all thought was never going to happen! That would be Glock, for years Glock has been steadfast about not allowing their handguns to be licensed by anyone other than them. Glock has been very protective about their brand and intellectual properties as they are entitled to. I'm not sure what Umarex said to Glock but somehow they where able to get Glock to agree to letting Umarex license Glock pistols to be made into BB and Airsoft versions. The first BB and Airsoft models I was able to checkout at this years SHOT Show are pretty basic in design and are styled after the Glock 19.

View fullsize

The new Umarex Glock 19 licensed BB and Airsoft pistols are CO2 powered as expected but don't have blowback operation and have a fixed metal slide and a drop out stick magazine. The new Glock Licensed Umarex pistols do however look and feel really good, picking them up you would think you are holding a real steel Glock until you try and rack the slide or drop the magazine. Umarex did indicate there will be more licensed models coming out down the road with full blowback operation and full size drop out metal magazines, we just need to be patient as Glock is very particular about the quality control.

View fullsize

Another show stopper for me at the Umarex Booth was the Legends Cowboy Lever Action Shell loading BB Rifle. I love shooting my Red Ryder BB Rifle but I have to admit the Red Ryder kind of looks a bit like a kids beginner airgun. The new Umarex Legends Cowboy Lever Action Shell loading BB Rifle look, feels and operates like the real deal so it's not only going to be super fun to shoot but an awesome replica to own especially if your into the old west guns.

View fullsize

The Umarex Legends Cowboy Lever Action Shell loading BB Rifle uses two 12 gram CO2 cartridges and can hold 10 BB loaded shells in its tube styled magazine, working the lever action elects the empty shells. Umarex claims around 410 fps so the Umarex Legends Cowboy Lever Action Shell loading BB Rifle will be Canada legal without the need for a PAL. I thought the stock was real wood but was correct, it's actually made out of plastic, but I think just about anyone looking close up would have a hard time believing Umarex didn't use real wood.

Thanks to Mark Davis from Umarex for making himself available to interview!

View fullsize

I wanted to start my SHOT Show 2018 Interviews with Crosman because in my books they had one of the most exciting new products this year at SHOT Show, the Crosman Remington DPMS SBR which is a duel 12 gram CO2 powered 4.5mm steel BB firing AR styled semi and full auto Machine gun.

View fullsize

What I like about the Crosman Remington DPMS SBR is that it works a lot like an Airsoft Gas Blowback rifle with an internal bolt and buffer tube spring, working charging handle and dust cover, it even has a bolt release button. The Crosman Remington DPMS SBR can even be taken apart similarly to a real AR rifle.

View fullsize

The next new interesting product from Crosman, and as I found out the design is not entirely exclusive to Crosman, was the CO2 Non-Blowback Pellet firing 1911. The Crosman Pellet 1911 has an interesting magazine design, it looks like a traditional full size drop out magazine, which as you would expect holds the CO2 but rather than an inline BB magazine the new Crosman Pellet firing 1911 has two built in 6 shot rotary magazines that can be flipped so you essentially end up with a 12 shot magazine.

View fullsize

You will have to drop the full size magazine after the first 6 shots to flip the rotary magazines. The Crosman Pellet 1911 does not have blowback action but the double action only trigger is smooth and not too heavy. The slide is metal with a metal magazine and a polymer frame. The Crosman Pellet shooting 1911 comes in silver and black.

View fullsize

The next new product from Crosman was the Mako. The Crosman Mako is a Beretta styled CO2 Blowback BB pistol. The Crosman Mako features Blowback action, fiber optic sights, tactical grips, a double action trigger and a stick magazine that holds the 4.5mm steel BB's.

Thanks to Phillip Guadalupe from Crosman for allowing me the Interview!

So it begins, I have been to this years SHOT Show in Las Vegas and checked out the new products from Umarex, Crosman, Sig Sauer and ASG. I have taken video and Interviewed the main Airgun companies. Now it's time to report back to everyone what I saw and learned. To start with here is a Teaser Video with some scenes from Vegas, inside SHOT Show and of course some of the highlight products from each airgun company.

View fullsize

Type: Blowback Pellet & BB Pistol.
Manufacturer: Distributed by Umarex.
Model: SA10.
Materials: Metal & Polymer.
Weight: 2.05 pounds (930 grams).
Barrel: Metal rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, single & double action.
Ammunition Type: .177 caliber pellets & 4.5mm BB's.
Ammunition Capacity: 8x4 round rotary full size drop out metal magazine.
FPS: Claimed 420.

View fullsize

Trigger Pull: The trigger pull on the Umarex SA10 CO2 Blowback Pellet and BB Pistol is similar to most of the rotary magazine styled pellet pistols. The blowback operation does cock the hammer allowing for a lighter single action styled trigger pull but the trigger pull length is still about the same as shooting in double action. There is less trigger pull weight when the hammer is back shooting in single action but the first part of the trigger pull is necessary in order to rotate the magazine.

View fullsize

Accuracy: At this point I have not shot the Umarex SA10 CO2 Blowback Pellet and BB Pistol so I have no feedback to share so far but I plan to test out the Umarex SA10 CO2 Blowback Pellet and BB Pistol during my next indoor Sea Can Field Test Shooting video. I will be testing out both pellets and BB's for velocity and accuracy.

View fullsize

Build Quality: The Umarex SA10 CO2 Blowback Pellet and BB Pistol feel great in the hand and has a nice weight and solid feel to it. Like most modern day pistols the Umarex SA10 CO2 Blowback Pellet and BB Pistol has a metal slide and polymer frame, you will also find a lot of internal metal parts along with a full size drop out metal magazine. Fit and finish are also very good.

View fullsize

Realism: The Umarex SA10 CO2 Blowback Pellet and BB Pistol is not a copy or replica of any actual real steel gun in production but to me it most resembles a Sig Sauer, not exactly as the Umarex SA10 CO2 Blowback Pellet and BB Pistol does incorporate its own design and style. You will find a lot of real gun attributes  that make this gun look and feel the deal. Like it's blowback operation, full see drop out metal magazine, wide open recessed barrel and ability to be field stripped.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Great weight and feel to it, build quality seems good.

• Accessory rail for adding a laser or tactical light.

• Unique full size drop out metal magazine that holds extra rotary magazines on it for quick reloading.

• Have the option of shooting Steel BB’s or pellets.

• Has a rifled barrel.

• Gold barrel looks good.

• Barrel tip is removable allowing for possible mock suppressor or silencer.

• Slide catch is actually a safety making it nice and discreet.

• Can easily field strip the gun.

• Warning instruction are not overpowering.

Cons:

• No white or yellow dot sight on the front and they are non-adjustable.

• Trigger safety is just for show.

• Not really a replica but a great looking gun none the less.

View fullsize

Comments:

I have been waiting a while to get my hands on the Umarex SA10 CO2 Blowback Pellet and BB Pistol and now that I have it for review I can say it seems to be a really well put together CO2 Blowback Airgun. OF course I still need to get some shooting in with it till I make my final decision but so far I am liking what I am seeing. Generally prefer actual Replica Airguns but the Umarex SA10 CO2 Blowback Pellet and BB Pistol does have a really nice look and feel to it, I don't even mind the Gold barrel and I am usually not a big Gold Gun fan. The unique magazine design with its snap in rotary Pellet and BB magazines shoudl come in handy when it coms time for testing and the ability to shoot either Pellets or BB's does give the shooter more options.

If you're interested in picking up an Umarex SA10 for yourself you can find them in our Replica Airguns Canada and US Online Store.

View fullsize

Type: BB Pellet Pistol
Manufacturer: Umarex
Model: SA10
Material: Polymer frame with metal slide.
Weight: 929.8 g (2.05 pounds).
Power Source: 12 g CO2 x 1.
Action: Single & Double action
Ammo Type: 4.5mm steel BBs and /177 caliber Pellets.
Ammo Capacity: 8 rounds.
FPS: 420

View fullsize

I have been having a hard time getting my hands on the Umarex SA10 CO2 Blowback Pellet and BB Pistol to do a review for everyone. It's been a rather low stock item. We have had it in a couple of times but not in a lot of quantity and since the demand has been higher than the supply the Umarex SA10 CO2 Blowback Pellet and BB Pistol tends to be out of stock most of the time! Hopefully that changes in the future?

View fullsize

This YouTube video is a Preview video only for the Umarex SA10 CO2 Blowback Pellet and BB Pistol so I do not go over a lot, I sim,ply show you around the gun and take a look at the packaging and any info on the packaging. My Future Table Top Video Review will have a lot more details along with a full field strip of the Umarex SA10 CO2 Blowback Pellet and BB Pistol.

I have yet to shoot the Umarex SA10 CO2 Blowback Pellet and BB Pistol so in terms of the Umarex SA10 actually power and accuracy, we will again fidn out when I do my Field Test Shooting view review for the Umarex SA10 CO2 Blowback Pellet and BB Pistol so check back for those review videos.

View fullsize

Here's what we know for now! The Umarex SA10 has a metal frame and polymer slide, it shoots both .177 caliber pellets and 4.5mm Steel BB's. The Umarex SA10 CO2 Blowback Pellet and BB Pistol has blowback action with a single and double action trigger and sports a full size drop out metal magazine that holds the CO2 and removable rotary 8 round magazines, 4 in total 1 ready for shooting and the other 3 on standby ready to be hot swapped. We should expect around 400 fps with lighter ammo and I am hoping for decent accuracy using pellets since the Umarex SA10 CO2 Blowback Pellet and BB Pistol does have a rifled steel barrel.

• Buy the Umarex SA10 CO2 Blowback Pellet and BB Pistol in Canada

• Buy the Umarex SA10 CO2 Blowback Pellet and BB Pistol in the US

View fullsize

First I wanted to wish everyone a Merry Christmas and Happy New Year, hopefully you get all the toys you have been wanting! Maybe we can help you out a little with that over on our Online Canada and US Replica Airgun Stores.

View fullsize

I also have a new Red Ryder Type BB Rifle to show off, this one is John Wayne licensed and called the John Wayne Lil Duke. At first glace it looks a lot like a Red Ryder but it has the large loop styled lever which is designed for easier use when wearing gloves, perfect for our Canadian weather ;) The John Wayne Lil Duke Lever Action BB Rifle has a really nice fit and finish, perhaps even a bit better than the classic Red Ryder BB Gun. I really like the real wood stock finish.

View fullsize

Another nice touch is that the John Wayne Lil Duke Lever Action BB Rifle comes with a lasso scope rail that you can attach just behind the rear iron sight to accommodate dove tail scope mounts. Just make sure to really tighten down the rear screw as it comes loose super easy due to the spring vibration. I would even recommend adding a bit of lock tight to the screw to be sure.

View fullsize

Here are some of the main specifications for the John Wayne Lil Duke Lever Action BB Rifle: 4.5mm Steel BB's, leaver action spring piston, 350 fps, 550 round magazine, 2.5 pounds, smooth bore 9.5 inch barrel, adjustable rear sight for elevation, included scope mount for 11mm dovetail rings, metal and wood build.

View fullsize

Look forward to a head to head showdown between the John Wayne Lil Duke Lever Action BB Rifle, the Classic Red Ryder BB Gun and the Marlin Cowboy BB Rifle.