I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!
Pros:
Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.
Smaller tank means if you are using a foot pump it won’t take all day to fill up :)
Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.
Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.
Not effected by colder temperatures compared to CO2.
Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.
Cons:
Still takes a while to pump up using a foot pump system.
Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.
Will need access to a pump or compressor to use it.
Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.
Comments:
I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.
In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.
First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.
13 Oz Aluminum
10 Inches Long
2 Inches Diameter
Integrated Pressure Gauge
Includes Buttstock
CO2 Adaptor Included
3000 PSI Fill
1100 PSI Regulated
Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.
6mm Airsoft BB’s
Green Gas / Propane
370 fps
25 Round Magazine
2 Pounds
Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!
6mm Airsoft BB’s
Green Gas / Propane
9.4 Inches
366 fps
28 Round Magazine
2.4 Pounds
Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.
4.5 mm Steel BB’s
CO2 x 1
4.2 Inch Barrel
330 fps
19 Round Magazine
2.4 Pounds
Comes with Laser Sight
Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.
I thought when I read the one mag instruction guide that I had a good idea on how to use it but there was one area I misunderstood. I thought I needed to pull the tab in and out several times to reload the magazine but in fact I only needed to pull it out once, then shale the magazine back and forth horizontally a few times and then I was good to go.
I also read some other comments that mentioned I didn’t have to take the magazine out every time I reloaded so in this video I test that out to make sure and then one last comment that rather than pulling the charging handle back each time I reloaded I could simply press the bolt release on the right side of the Airgun, and yes this is the case with the Crosman Full Auto rile series.
So here I go a second time in making sure I do it right this time!
I have been wanting to test out the Crosman Full Auto Quick Reload Magazine for a while now and finally got around to it. The weather was cooperating with me so I went outside for this one and setup a bunch of cameras to make the many many magazine reloads a bit more interesting for my viewers.
The Crosman Full Auto Quick Reload Magazine has a hopper that is said to hold around 300 4.5mm Steel BB’s which I can attest it does in fact hold at least 300 BB’s. The Crosman Full Auto Quick Reload Magazine like their regular Crosman Full Auto Magazines holds two 12 gram CO2 Cartridges, so the question is, will I be able to get through most of the 300 BB’s without reloading the CO2?
Watch my struggle a bit to figure out the exactly how to properly use the Crosman Full Auto Quick Reload Magazine and then quickly eat through 300 or so BB’s blasting pop cans down range!
My systems setup for a more powerful airgun as I was shooting .22 caliber lead pellets with about 11-12 foot pounds of energy. Direct hits passing through the 3/4 inch cut outs had no problem laying down the metal paddles and resetting the paddles was a lot easier than I though it would be even way back 50 feet.
I did not have my Sig Sauer Virtus PCP .22 Caliber Air Rifle perfectly sighted in so I did have to aim low and to the left which made it a bit harder dropping the plates but I did manage to get the job done at least for providing a decent test video fo the Rx Target Systems for the purposes of this video.
Make sure to not only watch my Field Test Shooting video included in this post but also checkout my Rx Target Systems Preview Video where I show it up and close and also go into more details on the Rx Target Systems and how modular and versatile it really is.
I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.
For now here are some of the key points I want to get out to everyone:
Mission: Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack. What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.
Modular
One base allows interchange of faceplates for different target configurations
One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles
Portable
Mount it on a shelf indoors
Mount it on a sawhorse outdoors
Carry it in a backpack or duffle bag- its 10 pounds
Rugged
Solid steel design
Faceplates from 10 gauge to ¼ inch thick
3-Dimensional
Faceplate is offset from paddles
Clipping the aperture does not guarantee a score
Intentions of target configurations
Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull)
1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper
AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.
WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures
10-15- Inspired by customer request, uses 10mm and 15mm apertures. High-Precision shooting.
Again I have some new products to show everyone. Some we got a bit of a preview of when I was at SHOT Show 2019 earlier this year but now I have them in my hands to show off and of course will be doing full Table Top and Filed Test for anything new as soon as I can get to them.
Starting with Sig Sauer, they sent me their brand new Sig Sauer P365 CO2 Blowback BB Pistol. This was probably one of my favorite new Air Pistols at SHOT Show simply because it is so small and somehow Sig was able to find a way to put a full size drop out metal magazine that holds both the CO2 and BB’s in it. This is one I am really looking forward to testing out in the Indoor Sea Can Airgun Shooting Range.
Another fantastic product is Crosman’s DPMS Full Auto CO2 BB Rifle which was pretty much perfect the first time around. Well at SHOT Show this year Crosman updated it a bit mainly with some cosmetic changes and now is offering the Crosman MPW, a slightly shorter version of the DPMS and now with an AR Compatible Stock for customizing your Crosman’s MPW Full Auto CO2 BB Rifle.
So maybe not as exciting… I also take a look at a NBB CO2 BB Makarov from KWC that is pretty basic but is much less expensive and will offer higher FPS and more shots per CO2 being that it is Non-blowback Airgun. It will be interesting to see how it compares performance wise to the KWC Full Blowback CO2 BB version.
Last but also super cool and I know it’s not really as Airgun related but still something I think everyone will be interested in is the Pocket Shot Pro Arrow Pouch with D-Loop. I reviewed the Pocket Shot “Slingshot” a while back, this new product allows you to use standard Arrows with their new Arrow Pouch getting around 40 pounds of pull and it comes with a trigger release. By the way the Pocket Shot Pro Arrow system is legals to hunt deer with in most US States, I’m not sure about Canada but perhaps here too?
I’m back from SHOT Show Las Vegas 2019 and as always I had an awesome time. I love January since I get to go to SHOT Show each year. What an awesome job!
This year was another great show with lots of new products from the Airgun companies. I managed to get seven interviews in this year so I have my work cut out for me editing and uploading all of these informative YouTube Videos.
For now here is a SHOT Show Las Vegas 2019 Teaser Video along with some photos…
In this December Update Video I wish everyone a Merry Christmas and Happy New Year. If you have other beliefs and perhaps don’t celebrate Christmas in the traditional Canadian fashion then I wish you a Happy Holiday!
I received a number of products lately and really don’t have time to do full reviews of them as the Holliday season is on us which is going to limit how many videos I can pump out over the next couple of weeks so hopefully this Update video will keep everyone excited about the future Replace Airgun Videos.
Here are the items I talk about in this December 2018 Update Video:
A while back I did review of the 1/4 Scale Mini Replica Guns distributed by Goat Guns. Goat Guns sent them to me for review and at the time we where not selling them in our Replica Airguns Store. Recently we got some of our own 1/4 Scale Mini Replica Guns that I would say are pretty much exactly the same as the Goat Gun Line but with different packaging since they are not distributed by Goat Guns.
The good news is you can get the same product from us now in our Canada and US Replica Airguns Stores! And ours are even pre-assembled for you but if you like you can take them apart similarly to a real gun.
These 1/4 Scale Mini Replica Guns are made out of a lot of metal where you wound find it on the real steel counterpart and most parts operate the same too like removable magazines, working triggers and safety’s, Even the dust covers on the M4’s open when you charge the mini gun!
My struggle for a reliable and dependable Chronograph to test the feet per second velocity of the airguns I test in my indoor Sea Can shooting range has been going on for some time now. My original Chrony Chronograph just never gave me consistent results and over time it pretty much became useless so I ended up shooting the living tar out of it (Watch that video) and replacing it with a slightly better Chronic Chronograph.
The new Chrony Chronograph setup in my indoor Sea Can Airgun range worked really well for me especially using the LED lighting system I added to it (Made by Caldwell). But not even two years later my new Chrony Chronograph just flat out died on me, the screen went all garbley-goop and became unreadable. I tried a new battery and looked everywhere to see if there was a factory reset I could do but was not able to get it working again :(
Well I figured I invested enough money buying Chrony Chronographs with not so good results from them so it was time to look to another company for my airgun velocity testing needs. I ended up going with the Caldwell Ballistic Precision Chronograph which by the way is compatible with my LED lighting system since it is all made by the same company. I paid $149 Canadian for my Caldwell Ballistic Precision Chronograph which is pretty good and it even came with a super long cable to connect a smart phone that works on both iPhone and Android phones using the Caldwell App to display velocity readings in the their smartphone App.
I will be making a "test" video where I shoot several airguns I have not Chronographed yet to see how my new Caldwell Ballistic Precision Chronograph works so stay posted for that video coming out very soon!
On another note I upgraded my Drone just a little, I previously bought the Yuneec Breeze 4k Drone to use in my future videos to get some new interesting camera angles while I do some of my outdoor shooting and to be honest the quality is really good on it. Probably good enough for what I'm doing, but for only a couple hundred dollars more I was able to buy the DJI Spark which is by far a much better drone than the Breeze in many ways. Video is more stable and "follow me modes" are way more reliable to name a few things the DJI Spark does that are important to me.
You'll get to see video from the DJI Spark shortly in fixture videos. This little Drone is crazy!
So how did the Air Venturi HellBoy M4 CO2 BB Rifle do? Unfortunately my Chrony Chronograph bit the dust, even though it I just bought it well I guess we are going back 2 years ago but still my luck with the Chrony Chronographs has not been good :( I thought it was perhaps the battery but when I switched it out for a new one I still got the same gibberish on screen!
So I resorted to using my Airsoft Chronograph which is not ideal for testing our steel BB's and or Lead Pellets. I did get some results which gave me a three shot average of 437 feet per second, this was after shooting off a full magazine and I was having some slight CO2 leakage with my Air Venturi HellBoy M4 CO2 BB Rifle? Perhaps a bad valve or seal?
When I was playing around with m y Air Venturi HellBoy M4 CO2 BB Rifle outside shooting clay pigeons at a variety of distances I found it to be pretty accurate finding my targets most of the time even out to 50 feet or more. So was not too surprised when I shot a nice 1 inch 10 round grouping using a mounted red dot scope to help a little bit.
All in all the Air Venturi HellBoy M4 CO2 BB Rifle is a pretty slick Replica Rifle to own, I will be comparing it to the Crosman DPMS SBR now that one has arrived, they both have pros and cons so it will be interesting to see which one is going to be my favorite at the end of the day but I can say if you can own both then go for it! And don't forget to watch my Table Top Review for the Air Venturi HellBoy M4 CO2 BB Rifle where I go into some more detail and show you around up close.
Type: Airsoft Rifle. Manufacturer: KJWorks. Model:M700P. Materials: Metal with textured synthetic stock. Weight: 7.8 pounds (3600 grams). Barrel: Smooth bore barrel. Propulsion: Gas operated (Green Gas or propane). Action: Bolt.. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 10-11 round metal magazine. FPS: Up to 550fps.
Trigger Pull: the trigger on the KJWorks M700P Gas Bolt Action Airsoft Rifle is what you would expect from a bolt action style hunting/sniper rifle. The working of the bolt does most of the work for your trigger finger so all that is required is the release of the firing pin from a very short and light tigger.
Build Quality: The KJWorks M700P Gas Bolt Action Airsoft Rifle is well built all around and the fit and finish feel good. all the mechanical parts functioned without any problems and I do like the textured stock and nice rubber butt pad. I did notice a couple of spots on the textured stock where it there where cosmetic imperfections, perhaps this is form the moulding of it?
Realism: The KJWorks M700P Gas Bolt Action Airsoft Rifle is based around the Remington 700 platform which looks like your standard high powered hunting rifle. The Airsoft version looks and functions just like the real deal since we are using Green Gas rather than a spring making the bolt easy and smooth to operate. Available From: The Replica Airguns Store.
Pros:
Bolt is super easy to use compared to a Spring style bolt action Airsoft rifle.
Textured stock feels great.
Lots of sight option with the built in scope rail and removable adjustable iron sights.
Ready for Bipod or sling.
Full size drop out metal magazine that holds the Gas and Airsoft BB’s.
Easy to adjust Hop-up screw.
Cons:
FPS was a little bit lower than expected.
Was not able to get 11 rounds into the magazine.
Some imperfections on the textured stock.
Comments: I have revised a couple of spring bolt action Airsoft rifles in the past and although it's nice that all you need is a bag of Airsoft BB's and your ready to shoot, having the Gas operation makes the bolt so much easier to operate allowing for much quicker follow up shoots. The more time you have to acquire your next target and make the shot can make all the difference when your enemy is closing in. The KJWorks M700P Gas Bolt Action Airsoft Rifle is a nice ready to shoot out of the box Airsoft rifle that if you want to can be customized pretty easy with a bipod or scope which I would recommend since not only will this make the KJWorks M700P Gas Bolt Action Airsoft Rifle look a lot better but also way more practical.
My YouTube Table Top Review Video for the KJWorks M700P Gas Bolt Action Airsoft Rifle:
First I wanted to wish everyone a Merry Christmas and Happy New Year, hopefully you get all the toys you have been wanting! Maybe we can help you out a little with that over on our Online Canada and US Replica Airgun Stores.
I also have a new Red Ryder Type BB Rifle to show off, this one is John Wayne licensed and called the John Wayne Lil Duke. At first glace it looks a lot like a Red Ryder but it has the large loop styled lever which is designed for easier use when wearing gloves, perfect for our Canadian weather ;) The John Wayne Lil Duke Lever Action BB Rifle has a really nice fit and finish, perhaps even a bit better than the classic Red Ryder BB Gun. I really like the real wood stock finish.
Another nice touch is that the John Wayne Lil Duke Lever Action BB Rifle comes with a lasso scope rail that you can attach just behind the rear iron sight to accommodate dove tail scope mounts. Just make sure to really tighten down the rear screw as it comes loose super easy due to the spring vibration. I would even recommend adding a bit of lock tight to the screw to be sure.
Here are some of the main specifications for the John Wayne Lil Duke Lever Action BB Rifle: 4.5mm Steel BB's, leaver action spring piston, 350 fps, 550 round magazine, 2.5 pounds, smooth bore 9.5 inch barrel, adjustable rear sight for elevation, included scope mount for 11mm dovetail rings, metal and wood build.
Type: Multi-pump Pellet-BB rifle. Manufacturer: Umarex USA. Model:NXG APX. Materials: Metal and polymer parts. Weight: 3.4 pounds (1.54 kg). Barrel: 20 inches, rifled. Propulsion: Multi-pump. Action: Single shot pellets/repeater BB's. Ammunition Type: .177 caliber pellets & 4.5mm steel BB's. Ammunition Capacity: 75 BB's in hopper. FPS: up to 490.
Trigger Pull: The trigger pull on the Umarex NXG APX Multi-pump Pellet-BB Rifle is not too bad, I would not say it's overly light but not on the heavy side either. Essentially it has a single action trigger since you need to pre-charge the bolt to engage the trigger. There is a little bit of take-up and then a fairly noticeable break point where you will feel the most trigger weight right before it releases.
Accuracy: So far I have not performed my Field Test Shooting review for the Umarex NXG APX Multi-pump Pellet-BB Rifle so I do not have any velocity or accuracy information to share at this point. I do plan on making that Shooting video Review this week so stay posted for that one.
Build Quality: The Umarex NXG APX Multi-pump Pellet-BB Rifle is not going to be one of your highest quality airguns but it does get the job done and feels solid enough with all the working parts feeling tight and secure. Most of the Umarex NXG APX Multi-pump Pellet-BB Rifle is plastic, even the bolt and trigger but you will find more metal inside where it counts like the inner steel barrel and the outer steel barrel shroud. The stock is plastic and that's OK, I do like the addition of the rubber butt pad and cheek rest as they work well and help to make the Umarex Umarex NXG APX Multi-pump Pellet-BB Rifle feel comfortable to hold in position and shoot.
Realism: Since the Umarex NXG APX Multi-pump Pellet-BB Rifle is not a replica, realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.
Pros:
Low cost air rifle with a lot of features.
Iron sights actually look really usable with the fiber optic red dot up front.
Comes with an 4x15 optical sight which should help with accuracy at longer ranges.
Super easy to pump even when getting close to the 10 pump max.
Built in auto safety.
Stock and cheek rest position feel really good.
Choice of shooting pellets or BB’s.
Trigger feels pretty good, not too heavy.
Mostly an ambidextrous design so good for lefties too.
Has a rifled barrel.
Overall a good looking air rifle.
Cons:
Mostly plastic, not the highest quality build.
Included 4x15 scope is super low budget but will work till you can upgrade it down the road.
Comments: I really hope the Umarex NXG APX Multi-pump Pellet-BB Rifle shoots well as it is kind of a cool air rifle with a lot of features at a low price tag and would make a great little target and maybe even small pest air rifle if it turns out to be accurate and hit that near 500 fps mark with pellets. The Umarex NXG APX Multi-pump Pellet-BB Rifle is not going to win any quality or design awards but from a usability stand point it works well and feels good to hold and shoot, the rear stock and cheek rest are in a perfect piston for me and this is a pretty small airgun overal. Personally I would invest in an upgraded scope, something like the Walther 4x32 would be perfect and not too expensive.
Power: Generally speaking a longer barrel is going to allow for more power. If you compare most CO2 pellet pistols to CO2 Pellet Rifles, you will find that the CO2 Pellet Pistol will generally shoot about 300-400 fps using a standard lead Pellet. On the other hand many CO2 Pellet Rifles can get up to as high as 600 fps which is much better speed for humanly shooting some smaller pests.
If you are talking about Springer or Variable Pump Air Pistols versus their Air Rifle counterparts, again the Air rifles will generally shoot with much more power. I have seen some none CO2 Air Pistols shoot up into the 500-600 fps range but again compered to none CO2 Air Rifles, they can even double these numbers.
Some of you may ask about Steel BB Pistols and Rifles. I personally would never really sue this type of ammunition for pest control simply because most BB Rifles have much less raw power than Pellet Rifles and steel BB’s will not be as accurate at any type of longer distance.
Stability: When holding any rifle from the shoulder, you have three point of contact with your body spread out in a much longer distance than a two handed pistol grip. Holding steady even without a rested position is much easier using a rifle. Even when using a rested position, the rifle will more stable.
Accuracy: A big factor in accuracy is stability but there are also other factors to consider. Barrel length its self does not make the gun more accurate, you only need a few inches of barrel length to get constant accurate results from a gun. What makes longer barreled guns more accurate is the distance between the rear and front sight. The closer the sights are together, the more margin for error there is, the longer you spread out the sights from each other, the more accurate the sighting system becomes.
Overall More Humain: When you consider Air Rifles tend to have higher power, better accuracy and overall more consistency than shorter barreled Air Pistols. The logical choice for humanly shooting a Pest is to use the Air Rifle. The last thing you want to do is make any animal suffer, even if it has been causing a lot of havoc around your home or farm or place of business.
To make this as comparable a test as possible I used two KWC/Gletcher Makarov Full Blowback Pistols each with their own separate magazine, again one with a 12 gram CO2 and one using the ANT system.
HPA or High Presure Air is not effected by cold weather which makes this setup ideal for shooting in cold situations since fps is not effected at all. As CO2 requires heat to expand, the colder the outside temperature the less amount of expansion you get from the CO2 whihc results in less power, this is really noticeable on your follow-up magazines as the CO2, magazine and even the gun will have started to cool down from the CO2 exposure.
The ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit even when using large 20 ounce CO2 tanks will help with the cool down effect since the large CO2 tanks will take much longer to cool down and even freeze up as compared to the smaller 12 gram CO2 which can get frosty even after the first magazine.
I did notice in this Field Test Shooting Review that the CO2 did pretty good as it was my first magazine and the temperature was not all that cold out. I can say the HPA System was shooting much harder, after making this video I popped off another couple magazine with each gun shooting out to at least 100 feet and the ANT FIRE HPA setup was really throwing the 4.5mm Steel BB's out there quickly. As expected the 12 gram CO2 mags really started to trail off especially on the third magazine of shots.
All in all, the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit will not only bring your cost per shot down significantly but it allows you to keep shooting with no down time waiting for your gun to warm back up and the ability to use HPA (High Pressure Air) means you will get even more fps performance out of your air guns but also much more consistent shot performance all day long!
Well ANT (Advanced Novelty Tech) made an update model that supports a bunch more guns, that's a good thing of course. This new model is called the "FIRE" and it supports the following guns. I did find however that ANT list that the Gletcher NGT and Webley Mark VI Revolvers where supported by the FIRE but my findings indicated the CO2 screw on both these guns had a smaller diameter so they where not compatible. Other than that small discrepancy most of the other guns on their list should work just fine.
What exactly is the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit?
The Advanced Novelty Tech FIRE CO2/HPA Conversion Kit is a remote line adapter for Airsoft, BB, and pellet guns. Compatible with over 60 guns, it is easy to install and converts a compatible gun for use with a Paintball remote line and CO2 or HPA tank. Eliminating the need for disposable CO2 cartridges, while still being interchangeable with disposable CO2 cartridges, it delivers a longer, more powerful, and more consistent shooting experience between refills.
So what is the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit going to do for you?
Eliminate the need for the more expensive disposable 12 gram CO2 cartridges.
Use interchangeably with disposable 12 gram CO2 cartridges.
Use in conjunction with a Paintball remote line with standard quick disconnect fittings and a CO2 or HPA tank. (recommended use up to 1000 psi)
Shoot thousands of rounds before needing to refill your CO2.
Fits compatible Airsoft, BB, and pellet gun CO2 pistols.
Easy drop-in installation.
Overall cost savings.
More consistent FPS especially when shooting fast or in full auto.
In short the MatisX is a Firearms Training System uses motion sensing technology to monitor how you hold your pistol before, during and after you shoot it, the Mantis MantisX Firearms Training System can determine areas that you may need to work on, like your Grip, Trigger Pull, Hesitation, Anticipation and many other common shooting mistakes.
In this Field Test Review for the Mantis MantisX Firearms Training System I setup my MantisX and take it through my first trial shots with it, you will see I am learning how to use it as I go but by the time I finished shooting the video I had a pretty good idea on how it all worked.
Two main areas the Mantis MantisX Firearms Training System directed me to correct where my pistol grip as I was potentially tightening up as I pulled the trigger and also my trigger pull was a bit uneaven, On my second round of shooting I made some corrections in this area and it did give me a much tighter shot grouping so the Mantis MantisX Firearms Training System at least for me did improve my shooting to some degree.
I plan to use the MantisX some mroe and find out other posible areas I can improve upon but overal I feel the Mantis MantisX Firearms Training System will help improve most people shooting skills or at least hlep them to figure out where they are going wrong.
**Make sure to use Coupon Code "ReplicaAirguns" to get free shipping! http://mantisx.com**
