View fullsize

Type: BB Gun/Rifle.
Manufacturer: Umarex USA.
Model: Morph 3X.
Materials: Plastic with some internal metal parts.
Weight: 2.5 pounds (1134 grams).
Barrel: 4.5 inches, metal non-rifled.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 30 round internal magazine.
FPS: 480+.

View fullsize

Trigger Pull: The double action type trigger pull on the Umarex Morph 3X CO2 BB Gun is reasonable, it is a bit on the longer side but is smooth with low friction and has a predictable break point. I found it very easy to shoot this gun with good accuracy shooting out in front as a pistol or rested on the shoulder using the shoulder stock more like a rifle.

View fullsize

Accuracy: The good news is that I have already done my Field Test Shooting video for the Umarex Morph 3X CO2 BB Gun so make sure to check that video review out when you have a moment. I was very impressed with the overall shooting performance of the Umarex Morph 3X CO2 BB Gun, it scored well in both power and accuracy! I was able to get a nice tight 3/4 inch 10 round grouping on my paper target setup 30 feet away and even with this Canadian versions 4.5 max length barrel I was still able to get really close to 500 fps out of the Umarex Morph 3X CO2 BB Gun! I wonder what velocity I would have managed if the extension barrel actually included the inner barrel portion for the full 12 inches of barrel length?

View fullsize

Build Quality: The Umarex Morph 3X CO2 BB Gun coming in at around $100 is a low cost BB gun considering it is so versatile. At this price point you are going to find an almost all plastic build with the exception of some internal metal parts. That said the Umarex Morph 3X CO2 BB Gun feels solid and well made, all the fitted parts feel tight when put together.

View fullsize

Realism: The Umarex Morph 3X CO2 BB Gun is not a replica of any gun that I can point out? It can also morph into so many different variation, Umarex says it has 3x configuration but I counted 8 possible configuration when mixing and matching components.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Under $100 in Canada at the moment of this review.

• Super versatile airgun with lots of configurations.

• Very powerful CO2 BB gun even in short barrel pistol only mode.

• Shooting test showed it had good accuracy, as good as any BB gun I have tested.

• Rails top and bottom for accessories.

• Fiber optic sights front and back.

• Has a Velocity Screw for adjusting fps power.

• In Pistol form with the rear stock, it would make a great back pack airgun.

• 30 round internal magazine for lots of shooting fun without having to reload so often.

• Uses 12 gram CO2, cheap and easy to buy.

View fullsize

Cons:

• Mostly plastic build.

• No inner barrel inside rifle extension so just for show, does not increase velocity.

• Rear sight is not adjustable but you have the option to add on a red dot or optical sight to the rail.

View fullsize

Comments:
I was pleasantly surprised with the Umarex Morph 3X CO2 BB Gun, I expected it to be much different from a lot of the other airguns I have reviewed since it is so versatile with all of its configurations. I was not expecting it to be so powerful with only the short 4.5 inch inner barrel. I was again surprised but the accuracy, not many BB guns get a 3/4 inch grouping at 30 feet out! Another kind of cool feature I didn't even know about at first is the ability to adjust the velocity using a screw for higher or lower fps. Lower fps will maximize the amount of shots you get from a 12 gram CO2 while higher fps is just kind of more fun to shoot in. I also don't often recommend BB  guns for pest control but in this case with how light weight and easy the Umarex Morph 3X CO2 BB Gun is to break down and put in a backpack, and the fact that it is fairly powerful and accurate out to 300 feet. I feel in a pinch you could take down some small vermin if you found yourself hungry and lost in the woods.

View fullsize

My Table Top and Field Test Videos for the Umarex Morph 3X CO2 BB Gun:

Buy Umarex MORPH 3X CO2 Carbine in Canada

Buy Umarex MORPH 3X CO2 Carbine in the US

View fullsize

A few years back I did a field test shooting review for the Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun but rather than my standard rested 30 foot paper target test I got out into the yard a bit and shot at some clay targets setup at a variety of ranges. I did this shooting freehand and unrested so the accuracy was a little left to be desired and actually determining how accurate the Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun was.

View fullsize

So I decided to revisit the Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun and retest the accuracy in my new Sea Can using paper targets setup 30 feet away using a rested and lated shooting position. I also redid my Chronograph velocity test siren my new Chromo setup is working so well.

View fullsize

I did get very similar results with my velocity Chromo Test, my first test I averaged about 430 fps and this time I got 428 fps shooting a 5 shot string. Moving onto the accuracy potion of my Field Test Shooting Review for the Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun, I did notice that it was shooting a little bit to the left, elevation was bang on but unfortunately with the Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun you can only adjust elevation and not windage?

View fullsize

Even so I was able to get about a 1.5 inch grouping with 10 shots on target with the Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun. But there was one mystery shot that seemed to for sure hit the target but left no indication of where it hit, perhaps I hit the same hole as my first shot?

View fullsize

The Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun is a really cool rifle, I would love to test out the Gletcher M1944 longer version but so far I have not been able to get my hands on one and have only seen it so far at SHOT Show. Keep checking our Replica Airguns online stereo for stock as our Gletcher inventory does go in and out of stock at times.

Buy the Gletcher 1891 Mosin Nagant Gun in Canada

Buy the Gletcher 1891 Mosin Nagant Gun in the US

View fullsize

I usually do my Table Top Video Review first but in this case I decided to pump out my Field Test Shooting video ahead of it. So if you're looking for more detailed specifications then just wait a bit till I get my Table Top Review out. What you really need to know about the Umarex Morph 3X CO2 BB Gun is that it's a CO2 4.5mm BB Gun with a 30 round internal magazine sporting multiple configurations as the stock, barrel and forward stock are all removable so it can be a pistol or a rifle and many variations in-between, even more than 3X of them.

View fullsize

The US version of the Morph 3X CO2 BB Gun when installing the rifled barrel (Which is not rifled buy the way), will shoot faster than when the Morph 3X CO2 BB Gun is in pistol version since the add on barrel adds a lot of additional barrel length to the airgun. The Canadian version which I am testing does come with the extension rifle barrel but it is only for show as the inside is missing the 4.5mm inner barrel. This is because our Canadian import laws for uncontrolled firearms would not allow the rifle version of the Morph 3X CO2 BB Gun here in Canada as it would potentially shoot with too much fps (around 600 fps) and foot pounds of energy for our Canadian non regulated gun laws. As it stand the Canadian version of the Morph 3X CO2 BB Gun has an fps rating of 480 fps in both pistol and rifle configurations.

View fullsize

All that aside how did the Morph 3X CO2 BB Gun do during my testing? Awesome to be precise! It actually averaged a 5 shot Chronograph Velocity Test of 498 fps even in pistol configuration which is very impressive for a CO 2 BB gun. I also was able to get the majority of my 10 shots on a paper target positioned 30 feet away from me using a rested seated position within about 3/4 of an inch. I even played around a bit with holding the Morph 3X CO2 BB Gun out in front like a pistol and tight to my shoulder using the rear stock.

View fullsize

It's kind of too bad we don't have the inner rifled version here in Canada as even at 600 fps we are just under 4.2 foot pound Canadian limit but trying to explain that this is still OK to our CBSA border guards is just a little too much for them to process :) Even without the inner barrel the Morph 3X CO2 BB Gun is a really great and super versitile airgun with lots of power and just as good accuracy!

Buy Umarex MORPH 3X CO2 Carbine in Canada 
Buy Umarex MORPH 3X CO2 Carbine in the US

View fullsize

Another revisit for an inexpensive and fun BB shooter, the Crosman Marlin Cowboy BB Rifle! I have done some previous video reviews and comparisons for the Crosman Marlin Cowboy BB Rifle so make sure to check them out. I also recently did an update Field Test Shooting Video for the Daisy Red Ryder BB gun which is a very comparable airgun to the Crosman Marlin Cowboy BB Rifle.

View fullsize

Here is a quick overview of the Crosman Marlin Cowboy BB Rifle, it's designed for younger smaller shooter with it's short stock but it's still fun of all ages! You can store 700 4.5mm Steel BB's in its internal magazine and Crosman claims a max velocity of 350 fps. Like the Daisy Red Ryder the power source is a spring piston that is activated by the lever action.

View fullsize

Now let's talk about how the Crosman Marlin Cowboy BB Rifle performed in my Sea Can Field Test Shooting test...  Crosman claims a max fps of 350, my Chronograph results came in at a 5 shot average of 316 fps which is not bad compared to the Daisy Red Ryder that also has a claimed fps of 350 but only shot around 240 fps.

View fullsize

So the Crosman Marlin Cowboy BB Rifle is the clear winner in terms of velocity over the Daisy Red Ryder but what about accuracy? That's a different story, the Crosman did not perform all that great for me shooting at a paper target 30 feet away using a rested shooting position. I shot 10 rounds at my paper target and got about a 5-6 inch grouping, there was an underlying smaller tight group that was closer to about 3 inches but a god 3-4 of the BB's came out of it spreading out the group significantly.  Compare that to the Daisy Red Ryder with a nice tight 2 inch group.

View fullsize

So what do you want? Power or accuracy? I figure since the Crosman Marlin Cowboy BB Rifle is really targeted of the younger more entry level shooter that it should have good accuracy so they know when they are doing it right and less concerned on if the gun is performing as it should. Sure power is fun and smashing your targets does give a certain satisfaction but you have to hit the target first :)

View fullsize

Both the Crosman Marlin Cowboy BB Rifle and Daisy Red Ryder BB Gun are fun airguns for sure, I guess it just comes down to which one you want to buy...

View fullsize

It's been a while since I pulled out the old Daisy Red Ryder BB Gun. And I know I have already done some Vimeo videos for the Red Ryder and the Crosman Marlin Cowboy but I really wanted to make an updated Field Test Video specifically for the Red Ryder and see how it fairs in a more controlled shooting test.

View fullsize

As always with my Field Test Shooting videos I test out the velocity using my Chrony Chronograph and see what the real world fps is compared to what Daisy Claims which by the way is up to 350 fps. I also setup a paper target about 30 feet back and take 10 shots using a rested and seated shooting position to determine what kind of grouping I can get and how well centered the airgun is out of the box.

View fullsize

During my velocity testing the Daisy Red Ryder BB Gun shot well under the claimed 350 fps by around 100 fps. I can say that the Daisy Red Ryder BB Gun was super consistent and shot between 242 fps as a low and 244 fps as a high averaging 243 fps. The Daisy Red Ryder is sure one of the most consistent airguns I have tested to date in terms of velocity constancy! This will help a lot with vertical accuracy.

View fullsize

During my accuracy test I would have to say the Daisy Red Ryder BB Gun shot pretty close to a 2 inch grouping and was pretty well centered with 4 shots hitting the black bullseye , I did pull my last shot a bit which extended the group a little but this was for sure my fault as I new I pulled it as soon as I shot it, the stock actually dropped on my shoulder a little just as I pulled the trigger.

View fullsize

Overall I really enjoy shooting the Daisy Red Ryder BB Gun, it's so simple yet so fun to shoot, there is just something about a lever action rifle that I really like and the super low cost to purchase and shoot a Daisy Red Ryder BB Gun also makes it a must have for anyone no matter how many airguns you own or what type you shoot. 

Buy the Daisy 1938 Red Ryder in Canada

Buy the Daisy 1938 Red Ryder in the US

View fullsize

The one everybody has been waiting for, my Field Test Shooting Review Video for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun!

I was originally planning on working out some of the magazine feeding issues with the Umarex Legends MP 40 Blowback CO2 BB Machine Gun as other reviewers had mentioned that the steel 4.5mm BB's can jam up a bit in the magazine. The only thing I did with my Umarex Legends MP 40 Blowback CO2 BB Machine Gun was to add a little bit of dry Jig-A-Loo lubricant to the magazine feeding track and make sure all my BB's where properly double stacked.. Other than that my Umarex Legends MP 40 Blowback CO2 BB Machine Gun is stock with no magazine spring mods.

View fullsize

I did find that my RWS Zinc coated Steel 4.5mm BB's had a tendency to bind a little in the top part of the magazine where the BB's go from a double stack to a single stack configuration. Now my RWS 4.5mm BB's are a bit older and I have found that older Zinc and Copper coated steel BB's will corrode a little which could cause some friction problems.

View fullsize

So for my Shooting Field Test I selected some brand new Umarex Zinc Coated Steel BB's and they did seem to work a little better for me as I did not get any magazine feeding issues during my testing of the Umarex Legends MP 40 Blowback CO2 BB Machine Gun. I did notice that when I did a magazine dump that the bolt cycle started to shorten up due to some cool down effect causing the bolt to lock, a quick 5 second break and she was good to go again to finish off the mag.

In terms of feet per second velocity Umarex claims around 450 fps for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun, this may be possible with brand new CO2 on a warm day but I got closer to a 400 fps 5 shot average under normal testing conditions, this is perfectly fine for a blowback BB airgun.

View fullsize

When I performed the accuracy test from my standard 30 foot out position on paper targets I got a very tight 1 inch group shooting in semi auto. just a light bit high and to the left but very close to the center bullseye. When I opened up and went full auto the group did largen a little since the Umarex Legends MP 40 Blowback CO2 BB Machine Gun does rock a little back and forth with it's internal bolt blowback operation but the remaining 40 rounds did stay within the most part within a 2-3 inch grouping.

The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a really sweet air riffle with a legendary look, blowback operation, semi and full auto capability, decent fps, great accuracy and at the end of the day is simply a ton of fun to shoot!

Buy Umarex Legends MP 40 Blowback CO2 BB Machine Gun in Canada

Buy Umarex Legends MP 40 Blowback CO2 BB Machine Gun in the US

View fullsize

Type: Air Rifle / Machine Gun.
Distributer: Umarex
Model: Legends MP 40.
Materials: Mostly Metal build.
Weight: 7.7 pounds (3.5 kilograms)
Barrel: 10 inches - smooth bore steel.
Propulsion: 2x12 gram CO2.
Action: Internal Bolt Blowback single action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 52 round full size drop out magazine.
Max FPS: 465.

View fullsize

Trigger Pull: The trigger pull on the Umarex Legends MP 40 Blowback CO2 BB Machine Gun is single action only and even though I have seen it tested at around 10 pounds pull, in person it does not feel that heavy and is actually fairly smooth. You will need ti charge the bolt for the first shot just like you would on the real steel MP 40.

View fullsize

Accuracy: I have not done my official Field Test Shooting Video for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun but did take it outside for a quick test run. Like others have reported back you really need to take your time loading the double stack magazine properly or you can have some feeding issues. it may even be a good idea to use a little lubricant in the magazine to help with BB smoothness. I will know more after I ahed played around with the Umarex Legends MP 40 Blowback CO2 BB Machine Gun a little more and worked out the BB feeding issues.

View fullsize

Build Quality: The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is pretty much all metal other than the stock and pistol grip. Pretty much everything that is black is going to be metal on this airgun. It weighs in at a hefty 7.7 pounds which is only a punt off form the real steel version. Overall the fit and finish is really good, all mechanical parts including the retractible stock work flawless.

View fullsize

Realism: The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a 1 to 1 replica of the real steel German made World War II Machine Gun. It is very authentic looking and has very similar operation. The BB version does have the ability to shoot in semi auto mode which the real steel version did not but this is a good feature for saving on CO2 and BB's It would have been nice if the bolt was abel to lock all the way back and up but since the movement is shortened this is not possible. Still the Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a really nice replica and almost every way.

Buy Airguns in the: Replica Airguns Store

View fullsize

Pros:

• Great to have another full size Rifle / Machine Gun available to purchase in a BB gun version.

• Mostly all metal design with good overall weight.

• Semi and Full auto select-ability.

• Dual CO2 design for increased shots and less cool down effect.

• High capacity full size drop out metal magazine.

• Great looking replica of the real steel MP 40 in looks, operation and weight.

• Internal bolt blowback will give a bit of recoil feedback feel.

• Adjustable rear sight for shooting at different ranges.

• Price point is reasonable for this type of full size mostly metal rifle.

View fullsize

Cons:

• Sights are not adjustable for windage.

• Bolt does not go all the way back to the lockout position.

• Some reviewers have said that a full mag load does not always work well in full auto mode.

View fullsize

Comments:
When I first got my hand on the Umarex Legends MP 40 Blowback CO2 BB Machine Gun at this years SHOT Show I immediately knew it was going to be a hit. The Umarex Legends MP has a lot going for it... High fps, semi and full auto, nostalgia of being a war replica and super great build quality and fit and finish. The questions is really who wouldn't want one? Especially being a replica BB rifle which has to be one of the more limited areas when it comes to airgun replicas. I look forward to shooting this offering from Umarex a little more and sharing my experiences with everyone.

My Vimeo Table Top  Review of the Umarex Legends MP 40 Blowback CO2 BB Machine Gun:

Buy Umarex Legends MP 40 Blowback CO2 BB Machine Gun in Canada

Buy Umarex Legends MP 40 Blowback CO2 BB Machine Gun in the US

View fullsize

It feels like I have been waiting forever to get my hands on the Umarex Legends MP 40 CO2 Blowback 4.5mm Steel BB Full Auto Machine Gun. I first saw the Legends MP 40 at SHOT Show this year in Las Vegas and immediately loved it, it was my top pick for the show and I predicted it would be a super hot item in terms of sales.

View fullsize

What's not to love about the Umarex Legends MP 40 CO2 Blowback 4.5mm Steel BB Full Auto Machine Gun? It's pretty much all metal weighing in at close to 8 pounds, The Legends MP has a max fps of up to 465, shoots in both semi and full auto and has a high capacity all metal 52 round magazine that holds not only 1 CO2 but 2 CO2 for close to 200 rounds of semi auto shooting or about 140 shots in full auto. I really look forward to my Field Test Shooting Review of the Umarex Legends MP 40!

View fullsize

Not to be out shadowed or forgotten in the preview video, I also show off another 2017 SHOT Show CO2 Blowback Air Pistol, the Umarex Beretta APX! Right away the Umarex Beretta APX feels nice and solid in the hand weighing in at around 1.5 pounds with a heavy metal slide and really high quality plastic or polymer frame. You will find some nice details like a cut out ejection port and recessed barrel and of course full Beretta licensing from Umarex. The Umarex Beretta APX CO2 Blowback BB Pistol has a pretty decent claimed fps of close to 400 and a 20 round stick magazine that when inserted has that full size magazine look to it.

View fullsize

You'll also find other nice details like white dot sights front and back and a working slide catch release. My only gripe with the Beretta APX is the trigger, it does not ahed the trigger safety you would find on the real steel Beretta APX and the action is very long and perhaps a bit heavy. Other than that the Umarex Beretta APX looks to be a really nice replica airgun.

Buy Umarex Legends MP 40 and Beretta APX in Canada

Buy Umarex Legends MP 40 and Beretta APX in the US

View fullsize

Type: Nerf Gun.
Manufacturer: Nerf Hasbro
Model: Rival Zeus MXV-1200.
Materials: Mostly plastic build.
Weight: About 3 pounds with batteries installed.
Ages: 14+ (My son is 10 and he is more than OK with this gun!)
Propulsion: Electric flywheel 6x C batteries.
Action: Semi auto.
Ammunition Type: Nerf High-impact round balls.
Ammunition Capacity: 12 round tube magazine.
Max FPS: 100.

View fullsize

Trigger Pull: The trigger on the Nerf Rival Zeus MXV-1200 is a little long and requires a firm trigger finger but it is not overly heavy. When you press the trigger it allows a Nerf High-impact round ball to advance into the motorized spinning flywheel area where the ball is accelerated and shot out of the inline barrel .

Accuracy: Keep in mind the Nerf Rival Zeus MXV-1200 is designed as a fun in home battle gun so long range accuracy is not really that important. At up to 30 feet or so you shoudl have no problem hitting a person sized target. The Nerf High-impact round balls do come out the the barrel with a fair amount of spin so some random hooking can happen, usually the spin is more of a backspin that helps keep the ammo targeting in a more linear trajectory.

View fullsize

Build Quality: The Nerf Rival Zeus MXV-1200 like most Nerf guns is built to take a fair bit of a beating since the target audience has mainly been kids and we know they are rarely careful with anything ;) The Nerf Rival Zeus MXV-1200 is mainly plastic but as I mentioned it is high quality and so far has held up well to usage. Fit is good with all interchangeable parts working well and the finish has stayed pretty much pristine!

Realism: Nerf guns are not made to be too realistic since they are meant to be toys and not look too closely like a real gun, hence the brightly colored plastic and more futuristic design. I do like the addition of Picatinny styled rails in several locations where one can add accessories like magazine clips, red dots or even a tactical light or laser sight.

View fullsize

Pros:

• Not as extreme as a Paintball gun but a little more intense than a standard Nerf gun.

• Good build quality overall.

• Easy to quickly swap out a fresh 12 rode tube magazine.

• Flip up sights

• Picatinny raise for adding accessories.

• Decent power and accuracy for a Nerf style gun.

• Semit auto action for fast follow up shots.

Cons:

• Will use up batteries pretty quickly.

• Flywheel will slow down when shooting close together semi auto shots.

• Loading magazines does take some getting use to.

View fullsize

Comments:
The Nerf Rival Zeus MXV-1200 is a great option for pretty much anyone looking for a fun battle gun you can use indoors in your home with no worries about breaking windows or messing up your house. not to mention leaving west all over your body! The Nerf Rival Zeus MXV-1200 is going to be a bit more extreme than a standard Nerf gun for sure but way more toned down compares to a paintball gun or even an airsoft gun so if you want some good old rainy day indoor fun then checkout the Nerf Rival line of Nerf guns.

My Vimeo Table Top Full  Review for the Nerf Rival Zeus MXV-1200:

This year at SHOT Show 2017 in Las Vegas, I found there wasn’t a lot of new Airgun products but as always there are some that stood out for me. If you want more info on each Airgun Company then make sure to watch my full interviews for this years SHOT Show 2017. So without prolonging this video any longer let’s get right into it…

Umarex Legends MP CO2 Full Auto German MP40 Replica Machine-gun:

What’s not to like about the Umarex Legends MP? It has lots of metal parts weighing in at 7.7 pounds, a 60 round steel BB magazine with a dual 12 gram CO2 system. You also get your choice of shooting either in semi auto or full auto at up to 400 fps. Personally the Umarex Legends MP was the most interesting Airgun at the show this year for me and I really think it is going to be a hit!

Umarex SA10 Blowback Pellet and BB CO2 Pistol:

Another interesting product from Umarex this year was the SA10, I am not really sure what it is exactly styled after, it’s more of a futuristic looking gun with slide venting and a thread barrel for adding a mock suppressor or compensator. What appealed to me most about the Umarex SA10 was the new magazine design that incorporates a full size drop out metal magazine with 4 rotary 8 round magazines that can be loaded with either pellets or BB’s. When you empty one 8 shot magazine you simply drop the entire mag out and swap your empty 8 shot rotary magazine for a full one. The SA10 has a nice weight of around 2 pounds and shoots up to 426 fps.

Sig Sauer ASP P320 CO2 Blowback Pellet Pistol:

Sig Sauer introduced their new Sig Sauer ASP P320 CO2 Pellet Pistol this year that will be replacing the P250. Like the P250 the Sig P320 has a metal slide and polymer frame but instead of a double sided 16 shot rotary magazine, the Sig ASP P320 has a newly designed and very unique 30 round belt fed magazine. That’s nearly double the capacity without having to flip the magazine around part way through shooting. It’s great to see innovations like this happening in the airgun market.

Crosman Remington 1875 Shell Loading CO2 Pellet and BB Revolver:

Crosman introduced their own Single Action Old West Revolver this year in the form of the Remington 1875. Like the super popular Umarex Single Action Army Revolvers, the Remington 1875 is also shell loading and uses 12 gram CO2. You have the option of shooting either Pellets or BB’s out of its smooth bore barrel. I expect the Crosman Remington 1875 Shell Loading Revolver to be another popular Old West Airgun Revolver.

Crosman PSM45 Single Shot Spring Powered BB Pistol:

The Crosman PSM45 at first glance may not seem that interesting, after all it’s all plastic on the outside and only shoots about 200 fps! On the plus side it kind of looks like a Glock and we all know how hard it is to find airguns these days that resemble a Glock. I also like the fact that there is no need for any CO2, and most springers out there look like springers while the Crosman PSM45 looks like a real semi auto pistol. The PSM45 even has pretty decent weight to it since there are lots of internal metal parts and a full size drop out metal magazine which was a real surprise in such an entry level low cost pistol. If you’re looking for a fun inexpensive replica plinker than the Crosman PSM45 should fit the bill. On a side not the PSM45 would also make a really great low cost prop since the slide does work and it has that full size drop out magazine!

ASG Dan Wesson 715 2.5 and 4 inch Shell Loading CO2 Revolvers:

The ASG Dan Wesson Revolver has always been a popular choice, and then the Dan Wesson 715 came out improving on the design by adding extra weight and smoothing out the mechanics. How do you top that? Well by giving us some more options like barrel lengths. You now have your choice of a 2.5, 4 or 6 inch barrel for the Dan Wesson 715 and of course you will be able to buy your 715 pick in 4.5mm Steel BB, 6mm Plastic Airsoft or .177 Caliber Pellet ammunition versions. My personal choice may be the 4 inch Dan Wesson 715 since it has the addition of an integrated accessory rail machined into the outer barrel for lasers or tach lights.

Gletcher M1944 Mosin Nogant CO2 BB Rifle:

The Gletcher M1944 Mosin Nogant CO2 BB Rifle is not a new replica gun this year but it has been a hard one to get your hands on. In fact up until SHOT Show 2017 I had never seen one in person and so the Gletcher M1944 is new to me. I was very impressed with the quality of the Gletcher M1944 Mosin Nogant, it has a lot of metal parts including the swing out bayonet and even the simulated wood stock looks like real wood. I even had to take a second look and ask before confirming that the stock is in fact plastic on the Gletcher M1944 Mosin Nogant. I am looking forward to reviewing this rifle in the future when I do finally get one!

Of course there where other interesting products at SHOT Show 2017 this year but those are the products that stood out the most for me. Again make sure to watch my full interview videos to find out more about all the new products at this years SHOT Show.

And finally my last Vimeo video from SHOT Show 2017 in Las Vegas! Sorry there is no Interview this time with KWA but I did talk a lot with the KWA folks over at SHOT Show this year and I even got to test out their Laser Targeting System designed to be used with several specifi KWA guns by laser-ammo.com.

Unfortunately we don't carry the KWA brand in the replica Airguns store, a few models sneak in when being distriubted by another company like ASG in the case of the ASG MP9. I would love to carry KWA Airsoft Products in the future since they really do make very high quality Airsoft guns.

KWA has a great selection of Airsoft pistols and rifles in both Gas Blowback and AEG formats. The quality reminds me of the KJWors Airsoft guns we sell in the Replica Airguns Canada Store, you can really feel the quality when you pick them up and hold them for yourself.

My last Interview for SHOT Show 2017 in Las Vegas, well at least till next year and I am already looking forward to going back and doing it all over again :) I met with Boris Shekhman from Gletcher and Boris showed me several of their Gletcher Airguns along with a new accessory introduced this year.

Probably the highlight at the Gletcher booth was the Gletcher M1944 Mosin Nagant CO2 4.5mm Steel BB Bolt Action full stock air rifle! I already reviewed the Gletcher M1891 short stock version but have been really looking forward to seeing the Gletcher M1944 Mosin Nagant in person. Interestingly, Boris was asked by the SHOT Show staff to remove the Gletcher M1944 Mosin Nagant from his display because the real metal swing out bayonet was a concern for them. Boris was kind enough to bring out the Gletcher M1944 for me to see and video for everyone. The full stock however is not real wood but you need to look super close to figure this out as the reproduction is incredible.

We took a look at another Gletcher Airgun I have reviewed in the past, the Gletcher NGT and Gletcher NGT R which are very acurate Steel BB and Pellet shooting reproductions of the Belgian Nagant Revolver. Both these BB and Pellet shooting NGT's are getting a slight make-over with the addition of a safety on them, the real steel versions do not have a safety but some dealers felt it was a concern so Gletcher moving forward will be including a safety on all new NGT's. So if you want a more original Gletcher NGT Nagant Revolver then hurry up and pickup the older non-safety versions while they are still available!

Last on the list of new products from Gletcher are some really great looking leather holsters that not only work for several Gletcher airgun products but can also be used for the same real steel versions. Some of the pistols these new leather holsters will accommodate are the Gletcher TT Tokarev, 1911, Grach, PM 1951 Makarov, and the Stechkin.

Next up from SHOT Show 2017 in Las vegas, I bring you my Umarex Interview with Bradley Burgin! Bradley showcases two new pistol from Umarex Airguns. First we take a look at the Umarex SA10 CO2 Blowback Pellet and BB Pistol. The Umarex SA10 has a unique full size drop our metal magazine that not only holds the CO2 but also houses 4 8 shot rotary magazines that can be pre loaded and then hot swapped as required. Each 8 shot rotary magazine can be loaded with either 4.5mm Steel BB's or .177 caliber pellets. The Umarex SA10 comes in at a hefty 2 pounds and can shoot up to 426 fps. The barrel is also threaded for attaching an optional mock silencer.

Next up Bradley showed me the ultra realistic and fully licensed Beretta APX which is a Blowback CO2 BB Pistol that like its real steel big brother has a locking metal slide and polymer frame. The Umarex Beretta APX has a 19 round stick magazine and shoots 4.5mm steel BB's at 400 fps.

Last but not least and perhaps the most exciting product from Umarex for me was the Umarex Legends MP. The Legends MP is a replica of the German MP40 submachine gun and even has semi and full auto selectability! The Umarex Legends MP is a mostly metal rifle and comes in at 7.7 pounds. The full size magazine holds two CO2 cartridges along with 60 4.5mm steel BB's for an almost endless supply of ammo :) The Umarex Legends MP like the real German MP40 has a metal folding stock and propels steel BB's at 400 fps.

This Vimeo Unboxing Preview Video focuses on two AR M4 styled AEG Airsoft Rifles. The G&G CM16 Rifles are all pretty much the same other than the barrel lengths and come in the following versions, the CM16 SRS, CM16 SRL and CM16 SRXL. I also showcase the Umarex HK M27 which is distributed by Umarex but made by VFC which is knwo for their high quality products. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG AR M4 rifle.

G&G CM16 SRS Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 4.97 Pounds

• Barrel:  8.1 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420 fps

Buy G&G CM16 SRL Black AEG Airsoft Rifle in Canada

G&G CM16 SRL Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 5.1 Pounds

• Barrel:  10.2 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420+ fps

Buy G&G CM16 SRL Black AEG Airsoft Rifle in Canada

G&G CM16 SRXL Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 5.24 Pounds

• Barrel:  13 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420+ fps

Buy G&G CM16 SRXL Black AEG Airsoft Rifle in Canada

Umarex H&K M27 Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: Umarex VFC

• Model: H&K M27

• Materials: Metal and Polymer Construction

• Weight: 6.7 Pounds

• Barrel:  14.2 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 320 rounds

• FPS: 400 fps

Buy Umarex H&K M27 Black AEG Airsoft Rifle In Canada

Buy Umarex H&K M27 Black AEG Airsoft Rifle in the US

This Unboxing Preview Video focuses on three Bullpup designed AEG Airsoft Rifles. The two Steyr Aug Bullpups are distributed through ASG while the IWI Tavor 21 is distributed via Umarex. In this Unboxing Preveiw video I take each gun out of the box and go over some basic specification and show you around each AEG Bullpup Rifle a little bit. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG rifle.

Here are some of the basic Specifications for each AEG Airsoft Rifle.

AEG Steyr AUG A3 MP AEG Aisoft Bullpup Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: ASG

• Model: Steyr AUG A3 MP

• Materials: Metal and Polymer

• Weight: 3.85 kg (8.5 pounds) 

• Barrel: 21.2 mm (0.83 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Plastic Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 394

Buy AEG Steyr AUG A3 MP AEG Airsoft Bullpup Rifle in Canada

Buy AEG Steyr AUG A3 MP AEG Airsoft Bullpup Rifle in the US

ASG Steyr AUG A2 Tan AEG Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: ASG

• Model: Steyr AUG

• Materials: Polymer with Metal Internals

• Weight: 3.39 kg (7.5 pounds)

• Length: 805 mm (31.7 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 394

Buy ASG Steyr AUG A2 Tan AEG Airsoft Bullpup Rifle in Canada

Umarex IWI Elite Tavor 21 Airsoft AEG Bullpup Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: Umarex

• Model: Steyr AUG

• Materials: Polymer with Metal Internals

• Weight: 3.5 kg (7.71 pounds)

• Length: 755 mm (29.7 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 395

It's been a great year for Replica Airguns and I wanted to share with everyone some of my favorites that I reviewed this year. In this Vimeo Video I show some of my top Replica Airgun picks for 2016 and talk a little bit about each one and what I like about it.

Here is a list of the Replica Airguns in this lineup:

• ASG Dan Wesson 715 CO2 Revolver - Comes in 4.5mm Steel BB, 6mm Plastic Airsoft & .177 Pellet.

• Umarex Colt Combat Vet CO2 Blowback 1911 - 4.5mm Steel BB.

• Sig Sauer MPX ASP CO2 Rifle - .177 Pellet.

• Sig Sauer ASP P226 CO2 Blowback Pistol - .177 Pellets.

• Air Venturi ISSC M22 CO2 Blowback Pistol - 4.5mm Steel BB.

• KJWorks KC-02 V2 Ruger 10/22 GBB Rifle - 6mm Plastic Airsoft.

• Umarex S&W M&P40 CO2 Blowback Pistol - 4.5mm Steel BB.

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.

Power Sources Covered in this review: CO2 - Green Gas / Propane - Spring - AEG / AEP (Automatic Electric Gun - Airsoft Electric Pistol)

Pro’s:

• CO2 Airsoft Guns allow for fast repeat shooting, great for action shooters, generally CO2 Airsoft Guns will have a little more power then Green Gas Airsoft Guns. There is no need to pump or cock your CO2 powered Airsoft gun in-between shots and a CO2 power source can allow for a very realistic action of the gun you are shooting. 

• Green Gas (Propane) Airsoft Guns operate much the same as CO2 Airsoft guns so they all make for great action shooters and the Green Gas powers the mechanical operation allowing for very realistic operation. Green Gas (Propane) Airsoft Guns can cost a little bit less to operate that a CO2 Airsoft Gun especially if you plan to use Propane as it can be cheaper to buy than the smaller 12 gram CO2 Cartridges.

• Spring Airsoft Guns are generally fairly basic and low cost so they are the usually the most affordable Airsoft guns to buy. There is no need to buy CO2 or Green Gas or even a Battery and Charger Setup so the cost to shoot Spring Airsoft Guns is only going to be subject to the Airsoft BB’s you plan on buying.

• AEG (Automatic Electric Guns) have the most consistent power as they use a spring internally that the electric motor draws back before each shot, the internal spring will essentially apply the same force to the Airsoft BB’s with each shot. AEG (Automatic Electric Guns) are a great option when you are wanting a Full Auto Airsoft gun since there is no cool down effect and as long as your batteries are charged and you have Airsoft BB’s in your magazine, the gun will simply keep shooting. AEG (Automatic Electric Guns) allow for the highest capacity magazines and often hold as many as 500 Airsoft BB’s in a single magazine. So if you’re looking for raw firepower an AEG or AEP Airsoft Gun is your best option. Once you have purchased your AEG (Automatic Electric Gun) and a battery and charger setup, they are fairly inexpensive to operate since no CO2 or Green Gas is required.

Con’s:

• CO2 Airsoft Guns require the additional cost to buy the CO2 cartridges as they will not function without it. CO2 Airsoft Guns have a limited power output and lose power as you shoot and use up the CO2. CO2 Airsoft Guns are effected by hot and cold temperatures and will have less power in colder temperatures and may not even work in super cold environments. CO2 Airsoft Guns will have a more conservative ammunition capacity since too high of a capacity magazine would freeze up the magazine and even the gun.  

• Again since Green Gas (Propane) Airsoft Guns work much like CO2 Airsoft Guns, they are effected by cool down and lose power when shoot quickly or as the Green Gas or Propane runs low. Green Gas does not expand as much as CO2 so it will not be as powerful and even less effective in colder temperatures. Green Gas Airsoft Guns will have a more conservative ammunition capacity since too high of a capacity magazine would freeze up.

• Spring Airsoft Guns are not the best action shooters since you need to manually operate the slide to pullback the spring prior to each shot, this does work well with Pump, Lever and Bolt Action Airsoft guns but is not the best option for pistols since most real steel pistols operate in semi auto mode.

• If you plan to use your AEG (Automatic Electric Gun) in a battle then it will require a multi battery setup which does cost a bit more upfront. AEG (Automatic Electric Guns) are know to not operate as realistically as a CO2 or Green Gas Airsoft gun since CO2 and Green Gas Guns do allow for the same realistic mechanical operation which can give very believable blowback operation, this is hard to replica with an AEG Airsoft Gun.

Power Sources Covered in this review: CO2 - Spring Piston - Variable Pump -HPA (High Pressure Air)

Pro’s:

• CO2 Airguns allow for fast repeat shooting, great for action shooters, generally CO2 Airguns will supply a medium power range. No need to pump or cock your CO2 powered weapon in-between shots and a CO2 power source can allow for a very realistic action of the gun you are shooting.

• Spring Piston Airguns are best suited of single shot situations, they can provide low to high power output depending on the spring used. Spring Piston Airguns are very low cost to operate since you only need to buy the Pellets or BB’s. Spring Piston Airguns are not greatly effected by outside temperatures.

• Variable Pump Airguns allow you to decide how much power your gun will have and can offer very high power output depending on the Airgun. Variable Pump Airguns are very low cost to operate since you only need to buy the Pellets or BB’s. Variable Pump Airguns are not greatly effected by outside temperatures. Variable Pump Airguns generally have very low recoil and vibration.

• HPA (High Pressure Air) Airguns generally do not require pumping or cocking in-between shots and some even come in semi automatic or bolt action. HPA Airguns can have very high power output and even be used on larger game using large caliber ammunition. HPA Air Rifles have lower recoil and low vibration. HPA Airguns can be charged ahead off time so they are ready for use when you need them.

Con’s:

• CO2 Airguns require the additional cost to buy the CO2 as they do not function without it. CO2 Airguns have a limited power output and lose power as you shoot and use up the CO2. CO2 Airguns are effected by hot and cold temperatures and will have less power in colder temperatures and may not even work in super cold environments.

• Spring Piston Airguns require cocking before each shot. Spring Piston Airguns can have a lot of recoil and vibration, so much so that special optics must be considered when buying an optical sight. The action of the spring recoil can effect accuracy, especially if you are not use to the vibration and recoil or have spent some time practicing using a Spring Piston Airgun.

• Variable Pump Airguns will require multiple pumps to achieved maximum power output which can take some time in-between shots. So you are going to have to work for each shot.

• HPA (High Pressure Air) Airguns require the use of a manual pump to fill their built in air tank to maximum pressure and it does take a lot of time to manual fill an HPA tank. Alternatively you can have the air tank filled at a shop or buy a pressurization system similar to a scuba tank out paintball setup, the cost of this setup can be very high but will save you the castle of manually pumping air in to your HPA Airgun. HPA Airguns are generally a little more bulky then other Airgun systems since they have to accommodate fairly large air pressure tanks.