We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.
This year the Crosman booth was a bit of a let down in terms of "Replica guns" There really wasn't anything new to speak of? I didn't hang around too long to check on the non-replica guns, perhaps they have been focussing on that area of their market for this year?
One 4.5mm CO2 Blowback BB Pistol they featured as a prototype version last years was on display this year as the final product, the Crosman GI Model 1911BB. And again I was not overly impressed. The Crosman GI Model 1911BB looks for the most part like a 1911 except for the funky trigger which is supposes to look like a 1911 single action trigger. In reality it is a rather heavy double action trigger not at all true to a 1911. I was also puzzled by how recessed the barrel was, sure it's nice to have a slightly recessed barrel to make the pistol more believable but the GI Model 1911BB inner barrel is recessed at least an inch or more robbing this pistol of potential fps.
Guess I'm going to have to try one out at some point to see if it shoots better than I am giving it credit for.
One product from Crosman that is kind of a crossover between a replica and a PCP rifle is the Crosman MAR177 PCP AR Conversion Kit. It is designed to replace the top receiver for a standard AR allowing AR owners to shoot .177 caliber pellets using a standard Pre Charged Pneumatic system with their AR platforms. Of course you need an AR lower to use the Crosman MAR177 PCP AR Conversion Kit.
So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.
Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!
2013 BB Pistols
2013 Pellet Pistols
2013 Airsoft Pistols
2013 Blank Pistols
2013 Rifles
Type: Airsoft AR M16 Styled Rifle.
Manufacturer:G&G.
Model:CM16 Raider GBB
Materials: Metal and plastic/fiber construction.
Weight: 5 pounds.
Barrel: 10 inches, metal non-rifled.
Propulsion: GBB
Action: Semi & full auto blowback.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 30+ round magazine.
FPS: 370+.
Trigger Pull: The trigger pull on the G&G AR styled Airsoft CM16 Raider is very smooth, the CM16 Raider uses a mechanical trigger that once the charging handle has been pulled back or "charged", works in a single action only manor with a slight bit of take-up and then a light predictable release. Each time the closed bolt gas blowback system shoots a round in semi or full auto, the internal action is ready for the next single action shot.
Accuracy: So far I have not tested Version 2 of the G&G CM16 Raider, but I have tested Version 1 so here are the result I got with Version 1 until I do my official Field Shooting Test with Version 2. When shooting from a 30 foot distance I did get some nice closely grouped shots from the G&G CM16 Raider Gas Blowback but when shooting in full auto it did spread apart somewhat, maybe from the GBB recoil? Version1 of the G&G CM16 Raider GBB shot an average of just over the 325 fps, I was using .25 gram BB's and it was a cool day so you can expect higher fps out of the G&G CM16 Raider when conditions are better.
Build Quality: The G&G CM16 Raider GBB being built on G&G Combat Machine Platform is targeted more for the price conscience person. The quality is consistent and good and I did not mind having more plastic in the G&G CM16 Raider GBB as my plan from the beginning was to add a lot of extra accessories and starting out with a somewhat lighter footprint made the gun still relatively usable even when all geared up with extra accessories. I also feel the plastic or polymer fiber upper and lower receiver and RIS rail system will also wear better than steel as it is more likely to flex rather than break in many situations, not to mention metal will show scratches and wear more over time.
Realism: Airsoft AR rifles in my opinion are very realistic in general, even the AEG versions work just like the real steel AR's with working charging handles, dust covers, bolts, magazine, adjustable stocks and sights, but I would have to give the advantage to the gas Blowback systems like the G&G CM16 Raider GBB as it has a full internal bolt with some decent recoil, it can also be field striped very similarly to a real AR15 rifle. The shot count is more like what you would find in an M16 or AR rifle which means you will need to consider ammo shot assuage and reloading more carefully when using it in an Airsoft game.
Purchased From: The Replica Airguns Store.
Pros:
Super affordable Gas Blowback Airsoft AR M16 styled Rifle.
Very high rate of fire in full auto.
Polymer shell is both light and very durable, does not show scratches or wear as easily as metal.
All most every part is operational - Fully Ambidextrous now.
Can be fully customized, lots of mounting points on the RIS Rail system.
Fully adjustable Crane Stock.
Removable rear Iron Sight can be swapped out for other sighting systems and hardware.
Version 2 is a significant upgrade from Version 1.
Internals can be swapped over to make it an AEG gun.
Cons:
Some people may not like the polymer RIS rails and upper and lower receiver?
Would have liked to have seen some sort of a plate over the pistol grip to finish it off.
Comments:
I already really liked Version 1 of the G&G CM16 Raider GBB Airsoft AR Rifle and even bought a bunch of magazines and gear to sport mine up for use in some local Airsoft games, the upgrades and improvements found in Version 2 are the icing on the cake! I am hoping the internal performance enhancements will increase the FPS just a bit and Gas efficiency somewhat over Version 2 but will find out when I give it a thorough testing shortly. If you have been a bit scared off by the higher prices of some GBB Gas Blowback Airsoft rifles then perhaps take a look at the G&G Combat Machine Platform CM16 Raider in GBB, it may just change your mind about Gas Blowback Airsoft rifles!
My Vimeo Video Review for the G&G CM16 Raider Airsoft GBB AR Styled Airsoft Rifles:
You may wonder why I am doing another video on the G&G CM16 Raider Gas Blowback Airsoft AR Rifle? That's because the one I have here in this Update Video is Version 2 and yes there is a difference. So far I can only tell you about the obvious stuff since I really have not tested it out to see if there are any other performance gains with Version 2 over Version 1.
G&G has made some improvement with Version 2 enhancing several areas:
First off, there is now a selector switch on both sides of the receiver allowing for left or right handed use.
Carrying on with the ambidextrous theme, G&G also added a magazine release to the left side of the receiver.
Another missing feature was a bolt lock out when your magazine was empty, this has been added and so the bolt will lock back about 1/3 the way back locking out the gun and letting you know when you are out of ammo.
The bolt release on Version 1 was just for show and did not function. On Version 2, with the bolt lock, G&G also added a working bolt release.
Those are some pretty significant improvements to the G&G Armament CM16 Raider GBB Version 2 in my books! So now it's time to test it out and see if full auto mode has been improved. I found with Version 1, that when using full auto, the G&G CM16 Raider GBB would have some trouble getting through a full mag dump but when shooting very quickly in semi auto had no problems at all.
Make sure to check back for my full review and shooting field test for the G&G CM16 Raider GBB Version 2 AR Airsoft Rifle.
Type: Airsoft.
Manufacturer:King Arms.
Model:Thompson M1A1 Military & M1928 Chicago (Gold & Chrome).
Materials: Metal & Wood.
Weight: 6.6 pounds.
Barrel: 15 inches, metal.
Propulsion: AEG
Action: Semi/full auto, single action.
Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).
Ammunition Capacity: 420 round magazine.
FPS: 380-410.
Trigger Pull: The trigger pull on the King Arms Thompson Machine Guns is fairly short and light as it is essentially just an on-off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected. As with all AEG systems their is a slight delay between when you pull the trigger and the shot is taken as the internal spring needs to compress first before releasing.
Accuracy: In many cases Airsoft guns can be just as accurate as 4.5mm BB guns, well at least at fairly close ranges, I was able to get most of my .25 gram BB 10 round target test shots within 1 inch from 30 feet away using a semi-rested position. There where a couple BB's that lengthened the group out to about 2 inches but still a very good result when you consider these are plastic BB's being used. In Terms of FPS, I did stick with the slightly heavier 2.5 gram Airsoft BB's and still got a decent 360 average 5 shot Chronograph test result making this AEG Airsoft rifle perfect for just about any Airsoft game type.
Build Quality: The King Arms 23 Karat Gold and Chrome Platted AEG Thompson Machine Guns are very well made using Aluminum Zinc Alloy bodies and real Wood Stocks, the fit and finish is very good and pretty much everything on these rifles are either metal or wood. You will have to polish these guns with a cloth from time to time since the mirror finish shows every smudge and finger print.
Realism: I'm not sure how many real 23 Karat Gold and Chrome Platted Thompson Machine Guns there are out there but there has to be at least a few ;) But going on how these guns look and feel, they are solid and very realistic. Some people have mentioned that the bolt should be on the top for some versions of the Thompson's but there are some Thompson's with the bolt on the side so I suppose we will let that one slide. The Wood stocks are a real plus adding to the overall weight and authenticity. Most parts works as they would on the real steel Thompson M1A1 Military or M1928 Chicago (Gold or Chrome) AEG Airsoft Machine Guns.
Available in the: The Canada Replica Airguns Store.
Pros:
Gorgeous Wood stock and Gold or Chrome platting.
Nice high capacity metal magazines, can be mixed and matched.
Adjustable rear sight for windage with two sight positions (Notch & Peep).
Semi and full auto selectable with really nice rate of fire.
FPS is bang on for indoor or outdoor Airsoft games.
Fully Thompson licensed.
Comes with Certificate of Authenticity.
Cons:
Does not come with a battery or charger.
Prone to finger prints and smudges.
Need to use a screw driver to get at the battery.
Comments:
I am a big fan of the King Arms Thompson line, even the all black version with the plastic stocks looks and functions great. Internally the lower cost black version is the same and having previously shot my black Thompson, I knew these blinged out 23 Karat Gold and Chrome Platted versions where also going to perform as good as they looked! I'm not so sure about buying a Gold or Chrome Thompson for everyday use, since they will get knocked around and scratched up but if you are looking for the best of the best with real wood stocks and all metal parts then make sure to consider one of the Thompson
My Vimeo Video Review for the King Arms Thompson Gold & Silver AEG Airsoft Machine Guns:
We just received an order of KWC products so if you've been waiting for some out of stock items then go take a look! By the way, the KWC Beretta / Taurus full metal blowback BB and Airsoft versions now come semi and full auto enabled!
I am jumping the gun so to speak with this field test review and showing you my field test video review for the King Arms Thompson Gold M1A1 Military AEG Airsoft Machine Gun before I've even done the table top review... Guess I just wanted to shoot this one :)
I decided to perform my field test shooting review using just the Thompson M1A1 version since the 1928 style has the same internal mechanics, there really was no point in testing them both. Other than a few cosmetic changes like a stick magazine versus the drum magazine and the forward stock pistol grip on the 1928 version, these guns are pretty much the same. I also opted for the most flashy 23 karat Gold version, well... because "Gold is Best!"
So let's get to the results! As with most of the guns I field test, I shot 5 rounds through my chronograph, this time I decided to use .25 gram Airsoft BB's for both my chronograph and target portions of this shooting review since fishing the ammo out of the stick mag was a bit of a pain ;) I was able to get a respectable 360 fps average 5 shot Chrono test which makes this AEG Airsoft rifle bang on for just about any Airsoft battle situation. I would expect to get right around 380-400 fps if I was using the lighter .20 gram BB's.
Once I stepped back to the 30 foot semi rested target position, I shot 10 rounds first in semi auto which got me a pretty nice tight 1 inch group (if you throw out the couple of fliers). In Full Auto the shot placement also stayed nice and tight spreading out to about 2 inches or so. This Classic Thompson AEG Airsoft Machine Gun definitely hits what every you are shooting at and has a nice rate of fire that's not too wasteful of BB's but still offers plenty of cover when required.
At the end of this field test shooting review for the King Arms Thompson Gold M1A1 Military AEG Airsoft Machine Gun, I shoot some water filled cans while capturing the experience in slow motion using my new iPhone 5's 720p 120 frames per second 4 times slow-motion feature.
I finally got my Official Field Test Shooting Review for the ASG Ruger MK 1 Gas 6mm Airsoft Pistol, make sure to also check out my Table Top Review for this Airsoft Pistol for more information on features, specifications and high quality photos taken by yours truly!
In this Field Test Shooting Reviews I test out the ASG Ruger MK 1 Gas Airsoft Pistol and put five rounds through my Chronograph to find out what the average fps is using .20 gram BB's and propane gas. ASG claims a pretty conservative 328 fps, I was expecting much higher and got much higher even on this rather mild fall BC day.
I shoot the ASG Ruger MK 1 Gas 6mm Airsoft Pistol from the 20 foot range since I hadn't done a pre-test of any sort. While shooting from a semi rested position at 20 feet back, I was able to get a 2.5 inch 10 shot group that kind of separated its self into two sub groups, one nicely centered right in the bulls eye and then another group of four that drifted a bit high and to the right a bit. The trigger pull on the ASG Ruger MK 1 Gas 6mm Airsoft Pistol is double action only and kind of on the long side but it is very smooth and has a nice satisfying metallic click to it, I found it pretty easy to shoot.
If you are a Ruger 22LR shooter than you may just want to get your hands on one of these and have the freedom of being able to shoot it just about anywhere!
My Vimeo Field Test Video Review for the ASG Ruger MK 1 Gas 6mm Airsoft Pistol:
We have some new arrivals in our Canada Replica Airguns Store that some of you who like the more flashy guns may appreciate! What makes a classic Thompson machine gun even better? First of all make sure it's got an all metal body, then add real wood furnishings and of course cover it in 23 karat gold platting or if you prefer a slightly toned down version, then go with the Chrome plating.
Thompson M1928 Chicago Grand Special - Gold/Chrome
Thompson M1A1 Military Grand Special - Gold/Chrome
6mm Plastic Airsoft BB's
420 round stick or drum magazines
AEG 8.4v (Large Type)
6.6 pounds (3000 grams)
400+ fps
Aluminum Zinc Alloy body
Real Wood
Gold version is 23K Gold Plated
Checkout my update video for the Thompson Special Gold & Chrome AEG Airsoft Rifle:
Type: Airsoft gas pistol.
Manufacturer: ASG.
Model:Ruger MK1.
Materials: Mostly plastic with some metal parts.
Weight: 1.2 pounds (550 Grams)
Barrel: Metal non-rifled.
Propulsion: Gas (Propane or Green Gas).
Action: Semi auto double action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 17 round full size drop out metal magazine.
FPS: 328+ (Have heard it is much more).
Trigger Pull: The trigger pull on the ASG MK 1 is double action only which will make it a bit on the heavy and longer side, it is smooth however and does have a nice satisfying click that sounds like a firing pin being dropped. The unfortunate part is that the real steel version is a single action only trigger and one that is super short and light so the contract between the Airsoft and 22LR version may make this gun not practical is an optional training tool.
Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting tests for this pistol (Click here for the Field Test Shooting Video). I will put a link in here when I have done my official Field Shooting Test. For now all I can go on is some feedback from others that have claimed very high fps and excellent accuracy, I am looking forward to finding out for myself!
Build Quality: ASG as usually only distributes quality guns, the fit and finish is very good and there is use of metal where it needs to be like with the internal mechanical parts, the trigger, the safety, the rear fully adjustable sight and the full size drop out metal magazine that holds the gas and the Airsoft BB's.
Realism: The ASG MK 1 is based on a combination of the Ruger MK I-III, it looks mostly like the Mark III since the arrel is fairly stout but it does not have the typical taper near the charging handle area. Still it resembles a Ruger 22LR pistol very much. There is no blowback or charging handle operation so that means that only a double action trigger is possible, this is a bit unfortunate sine the real Ruger Mark III has an absolutely smooth and light single action trigger.
Available in: The Replica Airguns Store.
Pros:
If you own a real Ruger 22LR it will be nice to have for some backyard or basement shooting.
Fully adjustable rear sight.
Full size all metal drop out magazine.
Metal trigger, metal safety and metal rear sight.
Very satisfying trigger sound, sounds like a real firing pin :)
Have heard it is really powerful and accurate - Yet to be determined…
Cons:
Fair amount of plastic but has an OK weigh to it.
No blowback (Would have allowed for a true single action trigger)
Safely is kind of heavy to operate but may break in over time.
Comments:
I think it may come down to how this ASG Ruger MK 1 Airsoft Pistol performs before I can give it my total thumbs up, I really wish it had a single action trigger but for a double action trigger it feels pretty good and I love the sounds of the internal hammer dropping. The fully adjustable sights mean that if this gun performs well in terms of accuracy then being able to dial it in to the bulls-eye will make it that much more enjoyable to shoot. Overall I like this pistol, the ergonomics are exactly like the real Ruger Mark III and even though much of the external build is plastic, it still has a good weight to it due to the all metal magazine and other internal metal parts.
My Vimeo Table Top Video Review for this ASG MK 1 Airsoft Pistol:
I originally made this Field Test Review Video a few months ago but had to pull it down because it featured two WE Products. The WE AK74-UN and the WE G18C which unfortunately looks a bit like a Glock. If you are not familiar with the video I made on the Glock Trademark Infringement Cease Order I received then you should probably watch that video, it will fill in some of the gaps on why I had to cut out the WE G18C portions from this video and repost it with only the parts that showcase the WE AK74-UN.
Anyways you can still read my Original Field Test Review post minus the video and photos of the WE G18C.
Type: BB Machine Gun/Rifle.
Manufacturer: Umarex USA.
Model:Steel Force (AR Platform).
Materials: Plastic and some Metal.
Weight: 3.37 pounds (1529 grams).
Barrel: Metal non-rifled.
Propulsion: CO2 x 2.
Action: Semi and 6 round burst blowback, single action only.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 300/30 round hopper/magazine.
FPS: 430+.
Trigger Pull: The trigger pull on the Umarex Steel Force CO2 BB Machine gun is single action only, so you will need to charge the rifle by pulling back the charging handle first, one this is done the trigger is reset and ready the gun is ready to shoot. The blowback operation charges the internal bolt automatically afterwards so keep this in mind, to release the bolt you will need to take out the CO2 magazine and press the trigger. The trigger is fairly light but has some initial take up and then a bit of creep before it releases the bolt.
Accuracy: I shot the Umarex Steel Force at a target from 30 feet away in a semi rested position using both the semi auto and 6 round burst modes, the Steel Force performed very good getting around a 1.5 inch 10 shot grouping in semi auto and then spreading out a bit in 6 round burst mode which was to be expected, still a respectable grouping. Shots where well centered on the target but I did have the advantage of using a red dot scope, I found when using the none adjustable open sights that come with the Umarex Steel Force that I was shooting under the target at closer ranges. My Chrony testing did not go exactly as planned due to my temperamental Chronograph but I was able to get two shots to read and they average out at 466 fps, well over the 430 claimed fps.
Build Quality: The Umarex Steel Force CO2 BB Rifle is mostly plastic on the outside with most of it's metal parts on the inside, you will find a metal flash hider, metal trigger and metal trigger guard but other than that everything else externally is plastic. The plastic seems durable enough but it has just a bit too much shine for me which I think makes it look less like metal and more like plastic. Everything seemed to function as expected but again I would have liked to have seen a bit more metal, not necessarily the outer shell, but I feel the selector switch, sights, magazine release, charging handle and front and back sights could have been made out of metal and would have given this Umarex rifle a bit more weight and balance.
Realism: The Umarex Steel Force CO2 BB Rifle is designed on the AR platform and for the most part is about the right size shape and look of an AR pr M16 rifle. Even the selector switch, magazine release, rear adjustable stock and Charging handle function just like a real AR! Some parts are model in just for looks like the bolt release, dust cover and forward assist but at least they fully look the part. The plastic for me was the real tell here as it kind of looks like plastic where as some plastic guns are really hard to tell they are not metal, but other than that this is a pretty decent replica of an AR Rifle.
Available From: The Replica Airguns Store.
Pros:
Higher than claimed fps.
Good accuracy in both semi and 6 round burst mode.
Got lots of shots per dual CO2 (Full Hopper).
Love the adjustable AR stock which was missing and needed on the Steel Storm.
Not a bad replica of an AR platform gun.
Full auto has a very high rate of fire.
Internal blowback does give a bit of recoil feedback feel.
Lots of rials for adding on accessories.
Price point is good for a fun dull auto BB rifle.
Cons:
Sights are non adjustable.
Plastic finish could have been a bit higher grade, like what most Airsoft AR's use.
Just a bit more metal would have been nice and added to the overall weight a bit: Selector, Magazine Release, Sights, Charging handle.
Comments:
The Umarex Steel Force CO2 BB Machine Gun is for sure an improvement over the Steel Storm, first of all it is a true replica of a real rifle in production (The AR/M16 platform), it also has a rear stock that is adjustable which makes shooting this gun on target so much more easier. Overall I feel it shoots better than the Steel Storm with improved accuracy and performance. With that said the Steel Storm is still a great BB machine gun if your looking for more of a pistol SMG design. For the low cost of the Steel Force you really can not go wrong, this BB machine gun will put a smile on your face every time you take it out to shoot it.
My Vimeo Table Top and Field Test Videos for the Umarex Steel Force BB Machine Gun:
I have some more anticipated items from Umarex to show you all, and a special thanks to Bradley from Umarex for sending them my way to review.
If you like the Steel Storm then you should for sure like the Umarex Steel Force, both models share some basic mechanical attributes like semi auto and 6 round burst blowback operation, duel 12 gram CO2 cartridges, 300 round BB hoppers and 30 round spring fed magazines. The Steel Force however is more of a "replica" as it is modeled on the AR platform including an adjustable rear stock which will come in handy taming the high rate of fire 6 round burst mode.
Next up from Umarex is a classic replica of the Luger P08, it's always nice to see some older classics made into BB shooters, it may be the only way some of us will get to experience them and from what I can tell, the Umarex Legends P08 is near spot on! You won't find blowback or even a lot of actual moving parts other than the trigger, the safety and magazine release but this BB gun is all metal and well built, it has a nice weight to it with a firm double action trigger.
My last review item is not a gun but rather a gun accessory, the Umarex T.A.C. Converter which transforms several Umarex pistols into tactical PDW's. The actual models supported are the: HK USP, S&W MP40, X.B.G, CZ Enforcer, Walther P99 DOA and the now retired Umarex SA 177. With the T.A.C. Converter wrapped around your pistol of choice you are all setup with a folding stock and foregrip, not to mention anything else you may want to add onto the rails.
Keep posted for my full reviews of these items from Umarex.
Watch my Vimeo Update Video for these Umarex Products:
All references, photos and video claiming that any item in this review/video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock "Renzulli Law Firm"
I almost forgot to do my field test review for my WE AK-74UN & WE G18C Tactical GBB Airsoft Pistol and Rifle! I decided to do them both together on this one but I still did my usual full testing for both guns which consisted of my Chronograph, Target and Can destruction along with some high speed slow motion of the blowback action of both guns in full auto mode.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Your best bet is to watch my Youtube video and see how both of these WE Airsoft guns perform. Overall they are both rally nice and super realistic, the WE G18C Tactical is definitely the full auto monster here while the AK-74UN is the bull in the China store with its crazy heavy blowback action, it has so much recoil that when shooting in full auto it kind of runs our of steam near the end, not so with the WE G18C as it did not slow down even with the 50 round magazine loaded up!
The WE AK-74UN even with it's crazy recoil holds on target very well in semi and full auto and of course has the superior fps performance. I found when shooting the G18C in full auto, I needed to hold my aim-point low as the blowback and super fast cycle rate wanted to pull the gun up and over my target, same would be true with a real gun so no surprise here.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Type: Pellet/BB Multi-pump Air Rifle.
Manufacturer:Crosman.
Model: MK-177.
Materials: Plastic with some metal.
Weight: 3.5 pounds.
Barrel: 16.75 inches, rifled.
Propulsion: Multi-pump.
Action: Single shot - bolt action with manual advance magazine.
Ammunition Type: .177 caliber pellets & 4.5mm steel BB's.
Ammunition Capacity: 5 shot pellet magazine - 18 shot BB internal BB magazine - 350 round BB hopper.
FPS: 750 with Pellets and 800 with BB's for the US version (Up to 495 with Canada version).
Trigger Pull: The trigger pull on the Crosman MK-177 is medium length and fairly light. The trigger mainly releases the bolt so no pre-cocking of the trigger is required. The trigger is plastic but seems to work just fine as there is no real load on the trigger when shooting, you do need to get used to where the release point since there is some take up well before the trigger releases.
Accuracy: I found the Crosman MK-177 Air Rifle to be a very good shooter, getting about a 1 inch 10 shot grouping from 30 feet out in a semi rested position (sand bag up front, standing in the back). I also put 3 rounds through my somewhat failing Chrony Chronograph using 3,5 & 10 pumps and the MK-177 with the maximum 10 pump shot as high as 631 fps using 6.9 grain RWS lead pellets. I would expect the Canadian detuned version to shoot well below the 500 fps Canada limit much like my Canadian Crosman M4-177 I reviewed a while back.
Build Quality: The Crosman MK-177 Multi-pump Air Rifle is mostly molded plastic, but for a $100-ish Military Styled Replica Air Rifle it hits the mark in terms of affordability and if it was an all metal airgun you would more than likely expect to double or tripple this price point! Even though plastic is used throughout this Air Rifle, there are some internal metal parts where they need to be, the fit and finish seems to be good and I do not get the feeling the Crosman MK-177 is cheaply made in any way. The fact that most parts are molded means there is very little that can snap or break off and will make this air rifle even more durable longterm.
Realism: The Crosman MK-177 is a lose replica or copy of an FN SCAR Assault Rifle or ACR. It is not exact in terms of true dimensions to accommodate the pumping mechanism, You will not find very many working parts as just about everything is molded into the plastic on this Crosman MK-177 rifle. Unlike the Crosman M4-177 the lower magazine area is not removable and the rear stock is also none adjustable, I am not sure why Crosman didn't add these features to the MK-177 like they did to the M4-177? I am glad to see another Replica Assault rifle on the market as so few of them are available in Pellet or steel BB shooters.
Available in the:Replica Airguns Store.
Pros:
The only SCAR Pellet/BB rifle I know of?
Fairly well priced.
Excellent accuracy!
Very easy to pump.
None red dot version comes with detachable and adjustable iron sights.
Rails on top and sides for accessories.
Option of shooting pellets or BB's, I would stick to pellets and save the barrel since it is not semi auto.
Feels super solid since there are very few moving parts that could break.
Looks like the Crosman M4-177 Pellet magazines are compatible.
Cons:
Mostly plastic and just about everything is molded into the gun.
Bolt and magazine are on opposite sides?
Would of been cool if Crosman made a dedicated BB magazine?
Comments:
The Crosman MK-177 Multi-Pump Pellet/BB Air Rifle is very much like it's brother the Crosman M4-177 with a few plusses and a few minuses when comparing the two of them together. On the plus side the MK-177 has a bit more power and also the pumping is much easier while yielding higher internal pressures. On the downside the Crosman MK-177 is almost entirely molded plastic with no removable lower magazine or adjustable stock, and the bolt has been switched around to what I feel is the wrong side since now you need to index the magazine on one side and work the bolt on the other requiring a less efficient approach. Either way it is nice to have another replica air rifle on the marker and for the relatively low price you get a nice accurate pellet rifle, great for target shooting and even small pest control.
Watch my Vimeo Full Video Review of the Crosman MK-177 Pellet/BB Air Rifle:
We have added some items to the Canada and US Replica Airguns Stores, most are completely new items and one is a Canada only item we added to the US store!
KWC 1911 Tac A1 Blowback CO2 Steel BB Pistol
I wanted to cover some basic Airgun, Airsoft Gun, Blank Gun and Paintball Gun information on what do they all shoot, what makes them shoot and some other miscellaneous info thrown in along the way...
Your should also watch the video attached at the bottom of this post as it goes into a fair amount of detail.
Let's begin with the types of ammo used:
Airgun Ammo
Airgun ammo for the most part is broken down into BBs and Pellets, the most standard size BB and Pellet is the 4.5mm or .177 caliber Steel BB and Lead Pellet. You can also get Pellets in other calibers and even other materials other than lead such as steel or aluminum, some can have plastic skirting around a metal interior.
Pellets also come in a variety of caliber's like .177, .20. 22. 25 and even larger but then I would start considering them to be bullets as they will take on the shape of a bullet when they get into the larger sizes.
Airgun Ammo is not be fired at people, it is primarily used for target and hunting small game.
Airguns can use Spring Pistons, CO2, Compressed Air and Multi-pump propulsion systems.
Airsoft Gun Ammo
Airsoft Guns for the most part shoot round 6mm (.22 caliber) plastic BBs which come in a variety of weights ranging from .12 grams up to .48 grams. There are larger Airsoft BBs such as 8mm and even larger.
There are biodegradable and even tracer florescent Airsoft BBs available.
Airsoft Ammo is traditionally used for Airsoft battles and can be fired at people using protective gear. Airsoft Ammo can also be used for target shooting.
Airsoft Guns can use Spring Pistons, Spring Piston - AEG (Electric Motor) CO2, Gas (Green, Red, Propane) and Compressed Air propulsion systems.
Paintball Gun Ammo
Paintball Guns or "Markers" have been historically used for the sport of Paintball but their whereabouts came from the need of ranchers and forestry workers to mark trees. Hence the name "Marker"
Paintball ammo comes in a variety of sizes ranging with the most common being .43 and .68 caliber. They are generally made from a gelatin outer coating containing primarily polyethylene glycol, other non-toxic and water-soluble substances, and dye, they are usually biodegradable.
Paintball Guns can also shoot a variety of Paintball Ammo that can be made out of Rubber, Plastic, Glass and they can also contain Powders and even Pepper for use in non lethal defense.
Paintball Guns can generally use either CO2 or Compressed Air as their propellant.
Blank Gun Ammo
Blank Guns are just like Real Guns but without the dangerous bullet at the end of the brass shell. Other than that they work exactly the same as a Real Gun!
Blank Guns are used when a bullet is not required or even wanted. For instance... Gun safety, gun training, training animals to be around guns and/or loud noises, Props for Movies - Stage - Film - TV, Collectors that do not want the red tape associated with owning a Real Gun or when owning a Real Gun is prohibited.
Blank Guns can shoot a variety of sized ammo, most common are .22 caliber crimped, .380 crimped, 8mm P.A.K. and 9mm P.A.K.
Blank Guns use gun powder as their means of operation.
Here are the most common forms of propulsion used in the guns we discussed earlier:
CO2
CO2 is the most common propellant in Airguns (BB and Pellet), it is also used in Airsoft Guns and Paintball Guns.
CO2 is a compressed gas which expands when released, it requires a warm environment to fully expand and tends to cool it's surroundings quickly when shot fast or in full automatic which can slow the velocity of the projectile and even freeze up the gun being used.
The most common reusable CO2 cartridges are 12 and 88 gram but you can get larger CO2 tanks in a variety of sizes that can be refilled with CO2.
Gas
Gas is used primarily in Airsoft Guns, I have not personally seen an Airgun that is made to use Gas other than CO2.
Gas is similar to CO2 in that it is a compressed gas that expands when releases, it also cools down the gun it is being used in and requires a warm environment.
Gas comes in a variety of names, Green Gas, Red Gas and Propane Gas. Green Gas contains Propane as it's base but has additives in it like silicone for lubrication .
Red Gas is know to be a bit more powerful than Green Gas as it has Chlorodifluoromethane or HCFC-22, R22 or Freon 22 used in refrigeration which turns to a liquid under a slightly higher pressure giving you slightly higher fps.
Many people use propane gas with an adapter that allows the mixture of silicone as propane is cheaper to buy.
Compressed Air (HPA)
Compressed Air (HPA - High Pressure Air) is most commonly used in Airguns and Paintball Guns but some people use it for their Gas based Airsoft guns.
The compressed air comes from high PSI tanks that can be purchased in a variety of sizes and contains compressed air at pressures up to 5000psi.
These tanks are reusable and usually need to be refilled at a paintball or scuba shop, some people buy their own compressors or large scuba tanks for refilling purposes.
Some Compressed Air (HPA) guns have their own built in tanks that can be filled with a compressor or even a manual pump.
Compressed air does not cool down the gun it is being used in and is a great option for high output or fully automatic guns.
Multi-Pump Pneumatic
Multi-Pump Pneumatic systems are most commonly used in Pellet and/or BB guns.
Multi-Pump Pneumatic guns use the same principle as HPA - High Pressure Air guns in that they require pressurized air as the propellant. The main difference with Multi-Pump Pneumatic guns, is that you do all the work by pumping the gun between shots. Generally speaking you pump the gun 3-10 times, take a shot and repeat this process.
Multi-Pump Pneumatic guns are not effected by air temperature and are great for target and small pest control.
Spring Piston
Spring pistons are generally found in Pellet Rifles and Pistols but some Airsoft Guns also use a Spring Piston System and generally speaking Spring Piston Guns are single shot only or in other words, the Spring needs to be drawn back before each shot. Spring Piston Guns can have magazines that allow for quicker repeat shots.
Spring Piston Guns come in many cocking configurations, Brake Barrel and Side lever to name a couple.
The Spring can be a Mechanical Spring or a Gas Spring.
Spring Piston Guns are not effected by temperature and are often used for small game hunting and target shooting.
Automatic Electric Guns (AEG)
Automatic Electric Guns are generally found in Airsoft Rifles but there are some Airsoft Pistols (AEP) that use this same system.
Automatic Electric Guns use a similar system to a Spring Piston gun but have an electric motor that does all the work of drawing back the spring. You can even have fully automatic AEG guns.
The power for the electric motor comes from removable batteries, so it is a combination a battery supplying the motor with the power to draw back the spring that creates a pillow of air that shoots the BB.
AEG Airsoft Guns are great for situations when you require high capacity magazines with full auto capability.
Gun Powder
Gun powder is used in Blank Guns, in the same manor that it is used in a Real Gun, the charge from the Gun Powder supplies the force required to operate the blowback in most semi auto Blank Pistols, it also creates the sound of a live round along with the muzzle flash which makes Blank Guns great for training and as Props for Movies and Film.
Because the kinetic energy from a blank gun is the same as a real gun, blank guns can be very dangerous when used in close proximity to an object, see my "Are Blank Guns Dangerous Video"!
Some other Gun Relevant Terminology:
Blowback
Blowback operation is when some of the force of the propellant is used to move the slide backwards, which in most cases cocks the hammer for single action and can also pickup and chamber a round into the barrel.
The slide spring supplies the energy for the return to the forward position of the slide.
Blowback Guns do rob some power from the bullet force and in the case of CO2 or Gas Guns the also reduce the amount of shots per CO2 or Gas fill.
Revolver, Semi Automatic
Revolver: Revolvers feed ammunition via the rotation of a cartridge-filled cylinder, in which each cartridge is contained in its own ignition chamber, and is sequentially brought into alignment with the weapon's barrel by a mechanism linked to the weapon's trigger (double-action) or its hammer (single-action)
Semi Automatic: semi-automatic pistols use the energy of one shot to reload the chamber for the next. Typically recoil energy from a fired round is mechanically harnessed. After a round is fired, the pistol will cycle, ejecting the spent casing and chambering a new round from the magazine, allowing another shot to take place immediately.
Single Shot, Repeater, Semi Automatic & Fully Automatic
Single Shot: A Single Shot Gun needs to be reloaded each time it is shot.
Repeater: Repeating action Guns are single barreled guns containing multiple rounds of ammunition. These rounds are loaded from a magazine by means of a manual or automatic mechanism, and the action that reloads the rifle also typically re-cocks the firing action. The term repeating rifle is most often applied to weapons in which the next cartridge is loaded by a manual action, as opposed to semi-automatic rifles, in which the force of one shot is used to load the next.
Semi Automatic: A semi-automatic, or self-loading, firearm is a weapon that performs all steps necessary to prepare the weapon to fire again after firing.
Fully Automatic: A Gun that uses either its recoil or a portion of the gas propelling the projectile to remove the spent cartridge (in the case of a gun-shell), fire again repeatedly, as long as the trigger is held down or until the magazine is exhausted. Automatic Guns are distinguished from semi-automatic Guns in their ability to fire more than one shot in succession once the trigger is pulled.
Single, Double Action, SA/DA
Single-Action (SA): trigger performs the single action of releasing the hammer or striker to discharge the firearm each time the trigger is pulled.
Double-Action (DA): The trigger both cocks and releases the hammer or striker
SA-DA: A SA/DA firearm combines the features of both mechanisms. You can pull the trigger in Double Action when the hammer is down which cocks and releases the trigger or you can cock the hammer with your thumb and then release the trigger using Single Action to fire the weapon.
Lever Action, Pump Action, Bolt Action
Lever Action: In a classic lever-action firearm, rounds are individually loaded into a tubular magazine parallel to and below the barrel. A short bolt is held in place with an over center toggle action. Once closed, the over center action prevents opening solely by the force on the bolt when the weapon is fired. This toggle action is operated by a hand grip that forms part of the trigger guard. When operated, a spring in the tubular magazine pushes a fresh round into position. Returning the operating lever to the home position chambers the round and closes the breach.
Pump Action: With a pump-action firearm, the action is operated by a movable fore-end that goes backwards and forwards to eject, extract, and chamber a round of ammunition. Pump-actions are usually associated with shotguns.
Bolt Action: The bolt opens and closes the breech end of the barrel and contains the firing pin. The bolt is held in place with a lever that fits into a notch. Moving this lever out of the notch will release the restraint on the bolt, allowing it to be drawn back. An extractor removes the spent cartridge, which is then ejected through the lever slot. A spring at the bottom of the magazine pushes up the reserve rounds, positioning the topmost between the bolt and the chamber at the base of the barrel. Pushing the bolt lever forward chambers this round and pushing the lever into the notch locks the bolt and enables the trigger mechanism.
Magazine vs Clip
Magazine: A magazine is an ammunition storage and feeding device within or attached to a repeating firearm. Magazines can be removable (detachable) or integral to the firearm. The magazine functions by moving the cartridges stored in the magazine into a position where they may be loaded into the chamber by the action of the firearm. The detachable magazine is often referred to as a clip, although this is technically inaccurate.
Clip: A clip is a device that is used to store multiple rounds of ammunition together as a unit, ready for insertion into the magazine or cylinder of a firearm. This speeds up the process of loading and reloading the firearm as several rounds can be loaded at once, rather than one round being loaded at a time. The term "clip" is also frequently used to refer to a detachable magazine, though such usage is incorrect.
I wanted to show off a few new items that I will be reviewing, one being the Crosman MK-177 Pellet and BB pneumatic multi-pump air rifle that was very graciously provided to me by Crosman for review. And the other item is something kind of new in terms of the type of gun, since it is not really gun but rather a bow, or crossbow to be exact. We hope to be adding to our Replica Airguns Store a couple variations of the Avalanche Trailblazer 150lb Crossbows in wood stock and polymer stock versions.
Here are a couple key points about each item being looked at in this update video and then I will leave you with some detailed photos to drool over and of course my YouTube Update Video to watch...
Crosman MK-177 multi-pump bolt action .177 caliber BB/pellet air rifle:
Shoots both .177 caliber pellets and 4.5mm Steel BB's
Maximum 800 FPS (US Version being reviewed here)
5 shot pellet magazine and 300+ BB reservoir
Multi-pump single shot bolt action
3-10 pumps per shot
16.75 inch rifled barrel
3.5 pounds
Mostly plastic with some internal metal parts
Avalanche Trailblazer 150lb Crossbow with Wood Stock:
150 pound pull
Fiberglass bow
Wood Stock
Comes with two arrows
Fully adjustable rear sight
Can mount a dovetail sight to it.
Type: Airsoft GBB Rifle.
Manufacturer:WE.
Model:AK74UN.
Materials: Metal & plastic.
Weight: 6.9 pounds (3115 Grams).
Barrel: 9 inches, smooth bore.
Propulsion: (GBB) Gas Blowback.
Action: Semi & full auto.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 30 rounds.
FPS: 400+.
Trigger Pull: The trigger pull on the WE AK74UN GBB Airsoft Rifle is very light (maybe even under 1 pound) since the blowback action has already pre-cocking the action making this rifle single action only. The take-up is very short, about one eighth of an inch or even less! The magazine has two switches, the one on the top allows you to dry fire while the one on the backside resets the trigger block. You will need to push the side switch down after reloading your magazine to allow the trigger/hammer to function again.
Accuracy: Out of the box the WE AK74UN Airsoft Rifle shot on the high side for me, about 8 inches at 30 feet, you can adjust the front sight post to some degree for elevation but I was not able to find any way of adjusting the windage? I did my pretest shooting from the 30 foot mark and I found the WE AK74UN Gas Blowback Airsoft Rifle AK74 Replica shot a very respectable 5 shot 1.5 inch group in semi auto which opened up of course when I shot the rest of the rounds in full auto. The full auto group stayed pretty tight considering all the recoil that was going on. I would say this gun should be able to shoot fairly accurately at distances even greater than 50 feet and even in full auto.
Build Quality: The WE AK74UN Airsoft Rifle is very well made with a lot of actual stamped steel parts, the only metal (zinc alloy) would be the trigger group, bolt, and part of the front sight, the pistol grip and front stock are made out of a matt finished hard plastic. Fit and finish is near perfect and I had no problems with the functionality of this Airsoft replica in any way. There are third party steel replacement parts for the trigger group and bolt if you want to swap these out at some point.
Realism: Everything about this gun is realistic! Operation, field stripping, tones of steel and metal parts, the long travel bolt, the slower cycle rate, and the heavy recoil all make the WE AK74UN GBB Airsoft Rifle as near perfect a working replica that you can find. Sure WE modernized this AK74 variant a bit with the addition of some enhancements but they do work well and make this Airsoft rifle very usable.
Reviewed by:Replica Airguns.
Pros:
Long travel bolt with heavy blowback, lower cycle rate like a real AK!
Lots of steel and metal in this gun, very hefty and solid.
Awesome blowback kick really hits you in the shoulder.
Semi auto & full auto selectable.
Field strips just like the real AK.
Nice high 400+ FPS and good 1.5 inch 5 shot group from 30 feet away.
Decent use of Gas.
Modified improved selector/safety switch can be used with trigger finger and also can be used to lock the bolt back for easy hop-up adjustments.
Magwell guide helps with insertion of the magazine.
Cons:
Long travel bolt kicks so hard that it can wear the softer Zinc Alloy internal parts quickly like the bolt and trigger grouping.
Sights are not really very adjustable, at least for windage.
Comments:
I really love my WE AK74UN Gas Blowback Airsoft Rifle, it is truly one of the most realistic replica guns I own, not just in looks but in how it functions and shoots. The heavy use of stamped steel, lots of metal throughout, full travel bolt with heavy blowback and realistic AK cycle rate make this one of the most fun guns to shoot that I own. If you're looking for a Gas Blowback AK styled Airsoft rifle this one is one of the best out there!
My Vimeo Table Top Video REVIEW of the WE AK74UN Gas Blowback Airsoft Rifle:
