In this Field Test Shooting Video I test out the Velocity and Accuracy of the Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle by first placing 5 rounds through my Chronograph and recording the feet per second for each shot and then averaging them out. For the second portion of my Indoor Shooting Performance Test I setup a paper target 30 feet down range followed by shoot 10 rounds back to back to see what the spread or grouping size is. I followed this up with a nice long full auto burst just for fun to see if the grouping still remains nice and tight.
For my Velocity test I used .25 grain Plastic Airsoft BB’s rather than the normally tested .20 in the claimed fps of over 366 fps so I was expecting to get a little bit lower velocity results. I did manage to average right around 304 fps with all shots fairly consistently with the slowest being 302 fps and the fastest hitting 305 fps.
I then setup my brand new paper target and using a rested and seated shooting position from 30 feet back I placed my first 10 rounds into the target. The Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle did shoot a little bit low close to the bottom of the rings but not as low as when I tested the Heckler & Koch HK416C version, I am sure some hop-up adjustment will get this closer to the mark. I did mange to get a really tight 10 round grouping of close to half an inch with most of the BB’s hitting one o top of the other I would ahed to say this is the best 30 foot accuracy results I have gotten from any Airsoft rifle to date! Full auto was as predicted, lots of fun with a nice hole in the paper/cardboard leaving about a 2 inch opening.
The Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle performed really well for me and as already mentioned is crazy accurate. It had a slightly lower fps than the Heckler & Koch HK416C version which was a bit of a surprise but at 304 fps using .25 gram Airsoft BB’s this is about perfect for close quarters shooting adn even out to medium distances. Make sure not checkout all of our Umarex VFC Heckler & Koch over in the Replica Airguns Canada Online Store.
In this Field Test Shooting Video I test out the Velocity and Accuracy of the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle by first placing 5 rounds through my Chronograph and recording the feet per second of each shot then averaging them out. For the second portion of my Indoor Shooting Performance Test I setup a paper target 30 feet away and then shoot 10 rounds back to back to see what the spread or grouping size is. I follow this up with a full auto burst just for fun to see if the grouping still remains nice and tight.
For my Velocity test I used .25 grain Plastic Airsoft BB’s rather than the .20 in the claimed fps over 366 fps so I was expecting to get a little bit slower results. I did manage to average right around 325.5 fps with all shots consistently hitting either 325 or 326 fps so super consistent.
I then setup my brand new paper target and using a rested and seated shooting position from 30 feet back I placed my first 10 rounds into the target. This is when I discovered the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle liked to shoot fairly low even when using the raised elevation option on the rear sight. Because of this I had to aim a little bit higher on the paper target to place shoots more centered. Once I figure out my aim point I did mange to get a fairly tight 10 round grouping of close to an inch with a couple of stagers pushing it out to 2 inches. Full auto was as predicted, lots of fun with a nice hole in the paper/cardboard leaving about a 3.5 inch opening.
The Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle performed well for me once I figured out that it liked to shoot rather low. I would suggest placing a bit of a spacer or riser under the rear sight to bring up the barrel at least for closer in shots where hop-up may not ark the Airsoft BB enough at that point. Other than that the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle had super consistent performance in terms of both FPS and accuracy.
Type: AEG Airsoft Rifles Manufacturer:Umarex / VFC Model:HK416C V2 Materials: Fiberglass reenforced plastic and metal. Weight: 6.1 pounds (2780 grams). Total Length: 22.6 - 27.4 inches (573-696mm). Barrel: 8.3 inches (210mm) non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 320 round magazines. FPS: 366+ fps.
Trigger Pull: The trigger pull on the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle is similar to a light single action trigger as they are essentially an electrical on off switch. There is about a quarter inch of take up with virtually no extra friction to let you know when the release is going to be, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle, but plan to make my Field Test Shooting Video shortly. So stay posted for that video coming out soon. I do expected Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle to perform well as it is a high quality and not so inexpensive AEG Airsoft Rifle.
Build Quality: The Build quality on the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle looks to be really good, there are lots of quality metal parts throughout this Airsoft Rifle including the top and bottom receiver, rails, sights, flash hider, magazine, charging handle, selector switch, magazine release, forward assist, dust cover and trigger. VFC (Vega Force Company) is the actual manufacturer of this product line and they are well know for making high quality Airsoft products.
Realism: The Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle is a 1 to 1 scale fully licensed replica of the real steel HK 416 compact CQB styled rifles but in an even more compact design I believe specifically only found in Airsoft versions as I was not able to find the exact same model on the H&K Website. That said most part work in the same manner as you would find on the real steel version including the Charging Handle, Forward Assist, Bolt Release, Magazine Release, Selector Switch and Pop-up sights.
Pros:
Full H&K Licensed via Umarex.
Made by VFC (Vega Force Company), well known for quality products.
Lots of metal parts where would find them on the real steel HK416.
Semi auto & full auto selectable.
No orange tip on Canada import version.
Comes with AR type compatible high capacity 320 round magazine.
Pop up metal sights are adjustable for windage.
Lots of rail attachment positions.
Easy access to hop-up system.
Quality internals - V2 metal gearbox and built in Mosfet.
Ultra compact adjustable CQB stock.
Cons:
Price is on the higher end.
No elevation adjustment on sights.
Limited to physical size/type of battery used.
Comments:
The Umarex VFC H&K AEG Airsoft product line is going to be on the higher end of the price spectrum for sure but you are getting a really quality product here fully H&K licensed. The Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle is perhaps one of my favorites as I like more simplistic and minimalist styles of guns and this one for sure fits into that category. Even though it is small in nature it is super solid and heavier then it looks for sure when you pick it up with all the metal parts making up its build quality. I look forward to seeing how well the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle performs in my upcoming Field Test Shooting Video.
My Vimeo Table Top Review for the Umarex VFC HK416C V2 AEG Airsoft Rifle:
In this video I show you four Premium AEG Airsoft Rifles made by VFC and distributed and H&K Licensed by Umarex. This is not a detailed review but rather I focus on the basic specification and show my reaction as I take my first look at all four Umarex H&K AEG Airsoft Rifles. I do show off some close up photos so you can get an idea on the finish and what some of the components look like.
For this Field Test Shooting Video I put the Specna Arms RRA SA-C10 Core and Specna Arms RRA SA-E10 Edge head to head to see just how they will compare in terms of FPS and Accuracy at least out to 30 feet. If you want to know more about each of these AEG Specna Arms Airsoft Rifles then checkout my Table Top Review where I show them up nice and close and also talk about their specifications and how they both compare to each other.
For my Chronograph test, I decided to go with .25 gram Airsoft BB’s, a little bit heavier than what was used for the claimed FPS of around 380 using the M120 spring which by the way is preinstalled in these guns for import into Canada. Both the Specna Arms RRA SA-C10 Core and E10 Edge shot pretty similar with the C10 Core averaging right around 300 FPS and the E10 Edge shooting a little bit faster with 318 FPS. Throw some lighter .20 gram Airsoft BB’s into the mix and these numbers would go up for sure. I was using the same 11.1 volt Li-Po battery for all of my testing in this video.
Next I placed a fresh paper target 30 feet downrange and placed 10 semi auto rounds into it using a seated and rested shooting position. Both Specna Arms AEG Airsoft Rifles shot about a 1 inch grouping. I did find with both of these Specna Arms rifles that when using the peep sight they shot too low and when using the top notch sight they shot too high at least at this distance. Of course the sights are fully adjustable so this can easily be taken care of and you can adjust the hop-up for even more elevation considerations. After my 10 shot semi auto test I placed both Specna Arms Airsoft rifles in Full Auto and let the paper have it! As expected the groupings did spread out a little bit but not all that much, perhaps opening up to around 3-4 inches.
After testing both the Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles side by side you really can’t go wrong with either version as they performed very similarly on the Chronograph and on Target. If you can afford to pay the little bit more than I would go with an Edge Series Specna Arms product since you do get a lot of extras for the little bit more you pay. Well worth it!
Type: AEG Airsoft Rifles Manufacturer:Specna Arms. Model: RRA SA-C10 / RRA SA-E10 Materials: Fiberglass reenforced plastic and metal/aluminum. Weight: C10 4.9 pounds ( 2.2 kg) - E10 5.1 pounds (2.3 kg). Total Length: 21.7 - 25.2 inches (550 - 640mm). Barrel: 6.7 inch (170mm) inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: Mid cap 120 round magazines. FPS: 375 - 390 fps with installed spring, included M90 spring will be lower fps.
Trigger Pull: The trigger pull on both of the Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles is similar to a light single action trigger as they are essentially an electrical on off switch. There is a little bit of take up with virtually no extra friction to let you know when the release is going to be, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles, but plan to very soon. They are next on my list for Filed Test Shooting Videos so stay posted for that video coming out soon. I do expect them to perform well and will be shooting both of these models side by side to see if there is any noticeable difference between the lower cost Core versus the slightly more premium Edge Specna Arms versions.
Build Quality: One thing I can say is no matter which version of the Specna Arms AEG Air Rifles you deicide to go with (either a Core or Edge Series), you are getting extremely good value for your money and neither one is going to have any low quality parts in it. Even the lower cost Core Series will have fiber glass reenforced plastic and metal parts along with a metal gearbox and virtually almost the same build as the more premium and slightly higher priced Edge Series. You will get upgrades in the Edge Series such as a an aluminum receiver and buffer tube, a GATE X-ASR Mosfet, the New Orion Gearbox, deep laser engraved licensing and an additional magazine. All of this for the little bit more you pay for an Edge series Specna Arms AEG Airsoft rifle.
Realism: The Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles are based on the AR15 or M16 platform of course in a very modern and PDW styled look. They look and feel the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of your Specna Arms Rifle.
Pros:
Super affordable yet very high quality product for what you pay.
Two options to consider, both with good price points and value.
Quality components throughout both the Core and Edge series.
Rock River Arms Licensed with hologram on receiver.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are fiberglass reenforced making them very durable.
Quick release fully adjustable pop-up sights.
No orange tips on our Canada Store versions.
Lots of rial mounting options even on such short PDW styled AR’s.
Metal gearboxes with metal gears and mostly all metal parts inside.
Easy access to motor for any possible trouble shooting you may need to do.
Cons:
Popup sights are mostly plastic..
Need to hold back charging handle to access the hop-up wheel.
Comments:
Value for your money is what comes to mind when I think about the entire Specna Ams AEG Airsoft Riffle product line. And this goes for not only the lower priced Core Series but also the premium Edge Series. Both version are built supper tuff with quality components throughout. You are just getting upgrades you are probably going to do at some point in time with the Edge Series and of course more metal components when you spend about $100 more for a similar Edge version. I figure if you can muster up the extra cash then go with an Edge Specna Arms AEG Airsoft Rifle, that said, any of the Core models will be money well spent.
Make sure not also watch my previous Specna Arms YouTube Video where I introduce the product line, show you around several models and talk about the key differences between the Core and Edge versions.
My Vimeo Table Top Review for the Specna Arms RRA C10 Core & E10 Edge Airsoft Rifles:
We have a new line of Airsoft rifles from Specna Arms I am super happy to be introducing to the Replica Airguns Airsoft Community.
Specna Arms AEG Airsoft Rifles are extremely cost effective and offer value for what you pay that is amazing. In this YouTube Introduction Video I go over the main differences between the Core Series (lower priced) versus the Edge Series (mid priced) so that you can understand what the extra cost will get you when buying a Spenca Arms Edge Series AEG Airsoft Rifle over a Specna Arm Core Series AEG Airsoft Rifle.
I also show 12 different versions from the Specna Arms Core and Edge Series some with Rock River Arms licensing and some without.
Specna Arms Core Series
Price: Mid $200’s (CAD)
Materials: Fiberglass Reenforced Plastic & Metal
Mosfet System: No
Gear Box: Ver 2 Metal Fully Upgradeable
Spring System: ESA Quick Change - 2 Springs (380-310 fps)
I have review all three of these super fun Full Auto CO2 BB Rifles so make sure to watch those YouTube Field Test Video Shooting Reviews to see how they performed on their own in the Sea Can Indoor Airgun Shooting Range.
In this Field Test Shooting Video I have a little bit of fun to see which of the three Full Auto CO2 BB Rifles is the King in terms of FPS Velocity and all out full auto mag dump acuracy.
All there of these BB Rifles are awesome and I highly recommend picking one up or maybe even all of them! You can get them in our Canada and US Replica Airgun Stores…
There is not much to really say here, it’s all about watching this one as I basically shoot stuff with the Air-Ordnance SMG 22 Full Auto Pellet Rifle and figure out how many 100 round belts I can get out of a fully charged 3000 PS 48 CU PCP Tank. So make sure to watch this one for sure!
There have been lots of requests for me to get to the Field Test Shooting Video for the Air-Ordnance SMG 22 Full Auto Pellet Rifle and I know I have been a it late getting this one out there. To be honest I was not looking forward to pumping up the rather large PCP tank and loading up all the 100 round magazines but it had to be done and so here we are…
In this Part 1 of my Air-Ordnance SMG 22 Full Auto Pellet Rifle Field Test Review I perform my usual Sea Can Indoor Shooting Test and place some rounds through my Chronograph to see what the actual FPS is. I also shoot a 10 round group at a paper target 30 feet down range to see what kind of accuracy we can expect from the Air-Ordnance SMG 22 Full Auto Pellet Rifle. By the way in Part 2 I take my Air-Ordnance SMG 22 Full Auto Pellet Rifle outside to have some fun with it and blast away in full auto so make sure to watch that video coming out very soon…
The Air-Ordnance SMG 22 Full Auto Pellet Rifle with a full PCP tank pressurized right up to the max 3000 psi and using 15.43 grain lead pellets was able to get an average fps of 422 which worked out to 6.1 foot pounds of energy or about 8.3 Joules. By the way I was able to get through 3 full 100 round magazines with a fully charged 48 CU Tank which is impressive. Shots did slow down a bit at the end but the gun was able to cycle fully.
In terms of accuracy my Air-Ordnance SMG 22 Full Auto Pellet Rifle was not the most accurate performer I have tested but considering it is a full auto Airgun and not so much made for total accuracy, the 3 inch 10 shot grouping I did get was good enough for me! Of course I was shooting in semi auto mode during this test which is pretty easy to do, no selector switch to worry about, just don’t hold the trigger down and you get semi auto shooting from the Air-Ordnance SMG 22 Full Auto Pellet Rifle, hold it down and you get full auto, and the tighter you hold the trigger down the faster the air machine-gun rate of fire operates.
So far so good, no miss-feeds or any problems with my Air-Ordnance SMG 22 Full Auto Pellet Rifle. now to take it outside and let loose on some clay pigeons, pop cans and a metal target.
Trigger Pull: The trigger pull on Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is nice and short and light as would be expected form a bolt action sniper rifle. The take-up and release are virtually on existent, just nudge your finger a bit and this Airsoft rifle is firing a round down range.
Accuracy: So far I have not tested out the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle but from what I have seen watching other YouTube videos, it looks to be very accurate right out of the box. The version I have has the Canada import legal heavier spring so it should shout right around 366 fps or a tad higher using .20 gram Airsoft BB’s. I will probably test mine out using heavier Airsoft BB’s when I perform my Field Test Shooting Video for the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle.
Build Quality: The Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle like all Tokyo Marui products is very well made, there is a lot of plastic in this Airsoft Sniper rifle but it is of good quality, you will find metal in the barrel and bolt areas of course. The trigger, safety and sling attachments are also metal.
Realism: The Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is based off of your typical bolt action hunting rifle with not a lot fo bells and whistles other than the included adjustable open sights but you can pimp it out with a ton of aftermarket modifications including much suppresses, scope mounts for a scope, bipods and pretty much all the internal parts can be upgraded and swapped out.
Pros:
Not a clone so all aftermarket parts will work on and in it.
No CO2 or batteries required, ready when you are.
Expect excellent accuracy at most ranges.
Easy to adjust on the field Hop-up.
Super easy to operate bolt action and very nice trigger.
Comes with heavier spring installed so more powerful than standard version.
Comes with integrated fully adjustable sights, no need for a scope to start shooting.
Comes with sling mounts which make it Bipod compatible.
No red tip.
Cons:
Does not come with scope plate so you will need that if you plan to install a stope on it.
Front sight is taped on with double sided tape.
Cost is high compared to other Spring powered Airsoft rifles on the market..
Comments:
There are lots of clones out there of the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle but this is the real deal and so you will pay more for it for sure but you will get Tokyo Marui quality and performance. That can not be said for the clone versions. If you do plan on upgrading yours down the road the Tokyo Marui version will accept all the aftermarket add ons and parts which again the clones may not and so you could end up wasting your money on parts that don’t fit with the other versions. Something to keep in mind when adding up all the costs. One thing to be aware of with the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is the bolt is a bit firmer with the upgraded spring dn so you need to make sure it is all the way forward before twisting and releasing. If you don’t it will not lock into place and you will end up scratching the back paint off of the area just in front of the safety, not a big deal, you can always touch it up easy enough.
My Vimeo Table Top Review for theTokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle:
I’ve had the Umarex Ruger 10/22 CO2 Pellet Rifle sitting around for a bit but just haven’t gotten around to reviewing it. When I saw it at SHOT Show a couple years back I was super excited about it probably because I though it was going to have internal blowback action making it function very much like the real steel 22LR Ruger 10/22. Once I finally got it in my hands I came to discover the Umarex Ruger 10/22 CO2 Pellet Rifle did not in fact have internal blowback and for the most part was a double action shooter. Yes you can work the Bolt Handle to cock the internal hammer making the Umarex Ruger 10/22 CO2 Pellet Rifle more of a single action trigger but you won’t be doing any action shooting this way, you’ll have to shoot in double action for that.
Getting on to my Field Test Shooting Review for the Umarex Ruger 10/22 CO2 Pellet Rifle this is how it went! As always a placed 5 rounds through my Chronograph to see what the real world fps was. Umarex claims with the detuned Canada version I was testing right around 450 using light weigth alloy pellets which are generally going to be around 5 grains. I like using lead pellets so I went with some 6.9 grain RWS lead pellets and was able to get a decent average fps of 420. (Keep in mind the US version is claimed to get around 650 fps using standard lead pellets). The temperature was around 24 degrees Celsius or 75 degrees Fahrenheit in my indoor Sea Can Airgun Shooting Range so not overly hot but a bit on the warmer side.
Next I setup a fresh paper target 30 feet down range and load up a full 10 round magazine and emptied it into the target shooting from a seated and rested position. I decided to shoot the Umarex Ruger 10/22 CO2 Pellet Rifle in single action for this test requiring me to charge the bolt handle before each shot. I was impressed to see a nice 10 round grouping with about half of my shots inside the bullseye and the other half just a little to the left, elevation was bang on and the grouping was just under an inch with all shots overlapping a bit.
I’m kind of thinking I may have prematurely written off the Umarex Ruger 10/22 CO2 Pellet Rifle because it didn’t have blowback action. I was expecting the trigger to be long and heavy but the trigger is actually really good even in double action mode so don’t let the lack of blowback action turn you off for the Umarex Ruger 10/22 CO2 Pellet Rifle at least in terms of trigger pull. Where the Umarex Ruger 10/22 CO2 Pellet Rifle excels in in consistency. It has the ability of being a real tac driver and as it’s based on the Ruger 10/22 platform I imagine there are all kinds of add-ons you can get for it. If you own the 22LR version and want to be able to shoot a 10/22 virtually anywhere for even less then the cost of 22LR ammo then consider picking up yourself one of the Umarex Ruger 10/22 CO2 Pellet Rifles in our Canada or US online Replica Airguns Stores.
For this Field Test Shooting Video I actually had to go outside and use my field so in order to have an appropriate amount of distance to properly test the Umarex AirJavelin Archery CO2 Arrow Rifle. My Indoor Airgun Shooting Range is only 30 feet long and my metal backstop was simply not usable for the arrows.
I setup a make ship arrow backstop using a large bag of bark mulch with a rubber matt over top. This setup seemed to work really well for the Umarex AirJavelin Archery CO2 Arrow Rifle allowing the arrows to stick in most of the way. My target was setup around 55 feet away and I was using rested but standing shooting position for my testing.
I decided to combine the Chromo and Accuracy portion of my Field Test Shooting Video for the Umarex AirJavelin Archery CO2 Arrow Rifle by recording each shot on my chronograph while I placed shots on target, why not right? I placed 6 arrows on target with 5 of my shots being recorded by the chronograph. The average fps was only 156, the highest being 183 and lowest being 136. I did experience a bit of a CO2 leak when I first placed my 88 gram CO2 in the Umarex AirJavelin Archery CO2 Arrow Rifle. I believe this was because I did not pull the bolt back which allowed the valve mechanism to be open slightly. I realized this fairly quickly and pulled the bolt back which saved most of the CO2 but I did lose a some. This may have lowered the fps a little bit but I was surprise that the Umarex AirJavelin Archery CO2 Arrow Rifle was recording about half the fps claimed by Umarex. That said the effectiveness of the arrows and penetration into the backstop would for sure get the job done if I was trying to eradicate some small to medium sized pests.
In terms of accuracy I was very impressed with the Umarex AirJavelin Archery CO2 Arrow Rifle. At 55 feet or so I was able to get 5 of the arrows all within 2-3 inches of each other, I did have one arrow drop a little bit lower than the main grouping. I’m not sure if I would want to shoot a pest out at 50-60 feet but it could be done with the Umarex AirJavelin Archery CO2 Arrow Rifle especially if you where to add a nice red dot or optical sight to it. I would think the Umarex AirJavelin Archery CO2 Arrow Rifle would be best suited shooting small to medium game at 30-40 feet which should allow for sub 2 inch groupings.
Type: Archery. Manufacturer: Umarex. Model:AirJavelin & AirSaber. Materials: Metal & polymer construction. Weight: 3.9 pounds / 6.3 pounds no scope. Foot Pounds Energy: 34 ft/lbs / 124 ft/lbs. Total Length: 34 inches / 41 inches. Propulsion: 88 gram CO2 x1 / PCP 3625 PSI, 250 cc. Action: Bolt single action. Ammunition Type: Carbon fiber 190 grain / 350 grain arrows (Field tip can be swapped over to broad-head) Ammunition Capacity: 1 Arrow. Max FPS: 300 / 450.
Trigger Pull: The trigger pull on both the Umarex AirJavelin and the Umarex AirSaber are both single action that require the bolts to be pulled back in order to shoot them. The Umarex AirJavelin trigger is not as short, light or crisp as the Umarex AirSaber, the Umarex AirSaber for sure feels higher quality as expected.
Accuracy: This is going to be very interesting as I have never shot anything like this before but from what I was told at SHOT Show this year I can expect very accuracy results from both the Umarex AirJavelin and the Umarex AirSaber Archery CO2 and PCP Arrow Rifles. I’m not sure if I will test the Umarex AirSaber unless I can make a safe shooting range for it, luckily I live out on average so as long as I can setup a good backstop I should be able to test them both.
Build Quality: The build quality of the Umarex AirJavelin and the Umarex AirSaber Archery CO2 and PCP Arrow Rifles is very good overall, the Umarex AirJavelin is mostly plastic and is not very heavy but the fit and finish is good all round. The Umarex AirSaber on the other hand has a lot of metal used in the construction, the only real plastic found on the Umarex AirSaber would be in the stock. The Umarex AirSaber is for sure a step up in quality over the Umarex AirJavelin but will cost you almost double in the end.
Realism: This is going to be pretty short section since both the Umarex AirJavelin and the Umarex AirSaber Archery CO2 and PCP Arrow Rifles are not replicas of any actual gun in production. Their primary use is going to be for hunting and or pest control I would say.
Pros:
Only Canada non PAL Airguns with enough power to hunt medium and larger game.
Overall price point is good, nothing like this to compare to.
Arrows are propelled from the front, no archers paradox when aiming.
Arrows come with field tip arrows but can be unscrewed and replaced with broad tip arrows for hunting.
Easy to use cross bolt safeties.
Pistol grips allow for easy hold and control.
Fit and finish is very good and excellent on the AirSaber.
AirJavelin: 88 Gram CO2 for quick easy use.
AirSaber: PCP for more power and larger game options.
AirJavelin: White dot up front with fully adjustable peep sight on back.
AirJavelin: M-Lock on sides for adding accessories.
AirSaber: Picatinny rails on top for scope, sides and bottom for accessories.
AirJavelin: Adjustable AR-style rear stock.
AirJavelin: Rubber buttplate for added comfort.
Cons:
No scope or sights with base model AirSaber so you will need to get one for it.
Not a lot of shots per 88 gram CO2, will need a pump for the PCP AirSaber.
Arrows are not cheap so make sure of your shots.
Comments: The Umarex AirJavelin and Umarex AirSaber Archery CO2 and PCP Arrow Rifles are very interesting in that they are really the only Canada legal “firearms” that can actually put down small, medium and even large game without requiring a firearms license (PAL). This is because they do not exceed 500 fps, they do exceed the foot pound energy limit of 4.2 foot pounds but since both of these rifles do not exceed the 500 fps limit they do not exceed both requirements to place them in the regulated firearms category that requires a firearms license. This is great news for anyone in Canada without a PAL license that wants to be able to hunt various game or take care of pests humanly. Umarex has also been kind enough to bring us two variations on this design. The Umarex AirJavelin more economical and easier to use CO2 powered version designed for small to medium sized game and the Umarex AirSaber higher quality PCP powered big brother version designed to be used even for larger game. Both are great, all you need to do is pick which one is right for you!
My Table Top Review for the Umarex AirJavelin and AirSaber Archery CO2 and PCP Arrow Rifles:
Make sure to watch my Table Top view for the Umarex REKT OPFOUR CO2 Foam Dart Rifle where I take a closer look a talk about the specifications and go over the Pros and Cons.
Umarex claims the Umarex REKT OPFOUR CO2 Foam Dart Rifle will perform with 30% faster and farther shots than a similarly styled rifle. If you look up the average speed of a Nerf Gun on Google, Wikipedia says that it is a around 70 fps and Umarex claims 90+fps. I placed 7 shots through my Chronograph averaging 127 fps, the slowest shot was 100 fps and the fasters shot was 148 fps do a fairly big spread. faster shots hitting close to 150 fps will hurt so be careful!
Next I wanted to see if the Umarex REKT OPFOUR CO2 Foam Dart Rifle can actually hit a person sized target at around 30 feet which I feel would be about the max distance you would be shooting the Umarex REKT OPFOUR CO2 Foam Dart Rifle as you will probably using it indoors or outside but in close proximity. My paper target is about 1 foot by 1 foot in size which is around the same size as a human torso. If I can hit that from 30 feet then I should be able to hit a person. The Umarex REKT OPFOUR CO2 Foam Dart Rifle was able to reach out 30 feet no problem but during the last 10 feet the Nerf style darts did seem to veer off target. I was able to get some of the darts on target but found that at 20 feet it was way more consistent. So try and get in a bit closer if you want to be more sure of placing an accurate shot on target. By the way the dart will travel as far as 150 feet.
Type: Nerf Type Gun. Manufacturer: Umarex Model:REKT OPFOUR. Materials: Mostly plastic build with some internal metal parts. Weight: 1 pound 8 oz (680 grams). Length: 30 inches (762mm). Propulsion: 12 gram CO2 x2. Action: Pump single action. Ammunition Type: Nerf type foam darts. Ammunition Capacity: 12 rounds. Max FPS: NA. Claimed 30% faster and 30% father than standard similar type Nerf spring pistols.
Trigger Pull: The trigger on the Umarex REKT OPFOUR CO2 Foam Dart Rifle is what you would expect form a single action only trigger. Very little take up with a crisp light release. When you pull the Free Grip back you are working the pump action which loads a dart into the breach and at the same time cocks the internal hammer/striker.
Accuracy: I haven’t performed my Field Test Shooting video for the Umarex REKT OPFOUR CO2 Foam Dart Rifle but I can say after play around with it I expect it to shoot a lot harder than 90 fps. When the dual CO2 system is fully charged I was getting some pretty ferociously fast shots form the Umarex REKT OPFOUR CO2 Foam Dart Rifle. I would say it was even able to shoot out into my yard at least 150+ feet. I was even a bit concerned shooting the Umarex REKT OPFOUR CO2 Foam Dart Rifle inside my house as it is possible to dent walls with the Nerf Darts. IN terms of accuracy it seems pretty good but I will know more once I have made my Field Test Shooting Video later this week.
Build Quality: The Umarex REKT OPFOUR CO2 Foam Dart Rifle is built pretty much exactly like other Umarex all plastic CO2 BB guns and that’s a good thing since they are pretty much bullet proof. I would even go on record to say the Umarex REKT OPFOUR CO2 Foam Dart Rifle is built better or should I say stronger than a Standard Nerf gun in terms of plastic thickness and even the fit and finish is very good.
Realism: One big advantage over most Nerf Guns is that the Umarex REKT OPFOUR CO2 Foam Dart Rifle looks a lot more like a real gun, it’s about the same size, has the same feel and looks a lot like a modern AR Rilfe other than the bright coloring going on. Ergonomically speaking the Umarex REKT OPFOUR CO2 Foam Dart Rifle would make a much better trainer than a Nerf gun since it is close to a one to one scale replica.
Pros:
No need to work a spring before each shot because of the CO2 power source.
More power and range than a traditional Nerf Gun.
More realistic looking than most Nerf Gun.
Like an Airsoft Gun but more usable indoors and less chance of injury.
Rear Peep sight is removable and can be swapped out.
Has a working selector switch safety.
Uses Standard Nerf Foam Darts.
Picatinny Rail top and sides for adding on accessories.
Dual CO2 system for extended shooting time before changing.
A great option for having some indoor fun!
Cons:
Will require CO2 x2.
May actually be a bit too powerful and can cause damage or injury if not careful?
More money than a traditional similar type Nerf rifles.
Comments: The Umarex REKT OPFOUR CO2 Foam Dart Rifle may be the ideal indoor fun Nerf styled rifle right now while we are all staying at home a lot more these days. Sure you could use a standard Nerf Gun but having a CO2 powered AR-15 looking Nerf gun is way cooler! I like that the Umarex REKT OPFOUR CO2 Foam Dart Rifle is more realistic looking then a traditional Nerf Gun, perhaps the perfect intermediary gun if you want something between a Nerf Gun and an Airsoft Gun? If you’re interested in a pistol version of the REKT line of Nerf Dart shooting guns then checkout the REKT OPSIX.
My Table Top Review for the REKT OPSIX CO2 Single Shot Foam Dart Launcher:
Type: BB Rifle. Manufacturer: Crosman. Model: R1 AR. Materials: Metal & plastic. Weight: 6 pounds (2.7 kilograms). Length: 26.25 / 29.25 inches (Stock closed / extended). Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 rounds. FPS: 430fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman R1 CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The real fun happens with the Crosman R1 CO2 Blowback BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in mere seconds.
Build Quality: The Crosman R1 CO2 Blowback BB Machine Gun is well made all around. Weighing in at 6 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman R1 CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real AR / M4 other than the forward assist which is moulded into the receiver.
Pros:
Super realistic working M4/AR 4.5mm BB Rifle just like the otters Crosman Rifles in this lineup.
Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.
Great weight and feel to it.
Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch…)
Duel CO2 full metal drop out magazine that holds the 25 4.5mm steel BB’s as well.
Adjustable and customizable AR butt stock.
Included red dot sight and ability to add pop-up iron sights.
Lots of rails of mounting additional cool hardware.
Removable flash hider that uses standard threading.
Cons:
Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.
No iron sights included.
Comments:
The Crosman R1 CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR and Crosman MPW with more or less Cosmetic changes. Like the Crosman MPW the Crosman R1 has an AR compatible Rear stock and pistol grip, the Crosman R1 CO2 Blowback BB Machine Gun is the only Crosman AR Full Auto CO2 BB Rifle that has the ability to change out the flash hider, you can even put a mock suppression or in it if you choose to. No matter which of the Crosman AR Full Auto CO2 BB Rifles you chooses to get they are mechanically every similar and share most of the same parts. I would say the Crosman R1 CO2 Blowback BB Machine Gun is the most customizable to date but they are all fantastic Air Rifles!
My Table Top Video of the Crosman R1 CO2 Blowback BB Machine Gun:
Here we are with yet another Crosman AR styled Full Auto Blowback CO2 BB Rifle and they just keep getting better, I say that lightly as even the first version the Crosman DPMS SBR still holds up to the 3 part lineup. It kind of has to since all three of them can be mixed and matched in terms of the uppers and lowers, magazines and I am sure most intern parts. Check out the Crosman DPMS SBR and the Crosman MPW for reference as I have made full table top and field test shooting videos for them already.
The purpose as always for my Field Test Shooting Videos is to find out how the airgun being reviewed performs in terms of velocity and accuracy, and if the ratings on paper end up being the same or close to the tested results. Crosman claims the Crosman R1 CO2 Blowback BB Machine Gun is capable of shooting 5.1 grain 4.5mm Steel BB’s at up to 430 fps. When I tested the Crosman R1 CO2 Blowback BB Machine Gun using my Chronograph averaging out 5 shots using a brand new set of CO2 cartridges I averaged 395 fps. Note the temperature in my Indoor Airgun Sea Can Shooting Range was about average at about 24 degrees Celsius or right around 75 degrees Fahrenheit. Comparatively I was able to get 405 fps from the Crosman DPMS SBR and around 385 fps with the Crosman MPW. Temperature may have beene slightly different on those testing days so that needs to be factored in.
Moving on to the accuracy portion of this Field Test Shooting Review for the Crosman R1 CO2 Blowback BB Machine Gun, I placed 10 semi auto shots on my paper target setup 30 feet downrange. I was using a rested and seated shooting position to help minimize human factor. I was able to get pretty much a 1 inch grouping with my 10 semi auto shots which was nit surprising as I have been able to get tight shot placement like this from the Crosman AR series before.
I then flipped the Crosman R1 CO2 Blowback BB Machine Gun semi auto selector switch to full auto and dumped the remaining 10 rounds into my paper target in full auto mode flowed by another full 25 round magazine again in full auto and the grouping only stretched out to about 2.5 -3 inches even with all the full auto vibrations and rocking around of the gun. Shot placement was a little bit high and to the left but this can easily be corrected using the red dot sight adjustments.
In summary the Crosman R1 CO2 Blowback BB Machine Gun performed a lot like the Crosman DPMS SBR and the Crosman MPW which makes since since all of them are virtually mechanically the same. In the end I think it really comes down to which of the Crosman AR type full auto BB rifles you like the look of since they areal very capable shooters. If you can’t decide then maybe get one of each :)
Starting with my Chronograph velocity testing for the Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle, I used a brand new Sig branded 90 gram CO2 cartridge along with 6.9 grain RWS pellets. The temperature was 24 degrees Celsius (75 degrees Fahrenheit) in the Sea Can Indoor Airgun Shooting Range. Sig claims the Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle to shoot up to 5.7 Joules. My Chrono testing resulted in an average fps of 418 with the 6.9 grain lead pellets which yielded a 3.7 Joule (2.7 foot pound) power output. I was not expecting 5.7 joules as that would have been closer to 600 fps using 6.9 grain pellets.
Next I setup a fresh paper target 30 feet down range and using seated and rested shooting position I placed 10 rounds into the target. The Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle shot a decent 1.5 inch 10 round grouping but I am pretty sure I can get better results once I find the right pellet, I have found this especially to be true with Sig Air Rifles. My MCX Virtus was able to get 1/2 inch groupings at 50 feet once I found ammo it liked and my MPX also shot a bit tighter form 30 feet out with a different ammo selection. I then unload the remaining 15 rounds in to the target rapid fire, followed by another 30 round full magazine and the grouping only stretched out a little bit, closer to 2 inches. Shots placed on the target a little bit low and to the right but this can be easily corrected for consistent bullseyes using the fully adjustable sights.
The Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle performed well for me in general, I did find that occasionally the belt did not index resulting in a misfire (no pellet fired) but the next pull of the trigger would index the belt resulting in a pellet firing, there where no jams and all rounds from the belt where fired. I am not sure why this happened as this did not happen to me with my other Sig Sauer Air Rifles. Perhaps I short triggered it a bit not getting a full belt index. I know many of you have been waiting for a Canadian version of the Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle, now that we have them in the All Black Iron Sight Version and FDE Red Dot Version, make sure to get one as once we run out I am pretty sure we will no longer be able to get these Canada Import Legal Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifles.
Watch my Preview Video where I take a quick look at the Sig Sauer MCX CO2 Pellet Rifle and Crosman R1 Full Auto BB Rifle. Full Table Top and Field Test Shooting Videos coming soon.
