A bit of a heads up, one of our most poplar BB and Airsoft Pistols, the Dan Wesson line is for the most part fairly well stocked right now in the Canada Replica Airguns Store and ready for the Christmas rush! With that said don't hold off too long because we always run out of at least a few of the most popular versions...
Buy Dan Wesson BB Revolvers in Canada - Buy Dan Wesson Airsoft Revolvers in Canada
I was going to put these two very nice EKOL Dicle 9mm P.A.K. Front Firing Blank Pistols up in the Canada Replica Airguns Store at a preset price but after viewing the condition and the fact that I have had a lot of people asking about blank guns being available, I decided to put them up as silent auction items instead, I kind of wanted to show them off in a video ;)
They are both in "as new" condition, one has never been shot, the other has had a handful of rounds through it, to be honest I can not tell which is which? So basically they are both in "new condition".
Both EKOL Dicle's are being sold with customized Hogue grips but I will include the original grips with them. Both come in the original cases and with the flare adaptors.
To place a bid to purchase one or both of these very nice EKOL Dicle Blank Pistols, you will need to Email Me Here with your highest bid. I will contact the winning bid at the end of the auction and send them a PayPal request for the total amount including $17.99 Shipping/Handling along with their local tax rate. The winner will have till the end of the day to pay or I will move on to the next highest bidder.
This auction will conclude on Friday November 16th Midnight so act fast!
Enjoy my YouTube Video showcasing the EKOL Dicle twins:
As with most new items I pickup, I like to share them with everyone. I am checking into some more ROHM blank guns, an RG-59 and RG-88, the RG-59 is a lot like the ROHM RG-56 .22 caliber blank revolver I sell in the Canada Replica Airguns Store but in .380 caliber and the one I show off here is a 5 shot two-tone model. Other than that they use the same frame and mechanical parts throughout.
I also received a black/blued ROHM RG-88 which is kind of like a Walther PPK in design, it field strips the same, has a similar safety setup and even has a similar size and look to it although it is definitely not a replica of a Walther PPK. I am impressed with the overall quality of the ROHM blank guns, material used, fit and finish is very good.
Lastly, I acquired a pre-owned Umarex CP99 CO2 Pellet Pistol from a customer of mine. It is in pretty much in new condition and is one of the Umarex guns I was missing in my collection and have been looking to add. The Umarex CP99 is a pretty good replica of the Walther P99 and uses the standard Umarex metal 8 shot rotary magazines and shares the same CO2 grip fed magazine as the CPSport. The CP99 is German made so it's not one of the lower cost Umarex pistols out there but you do get what you pay for ;)
For my Canadian Blank Gun collectors, I'm not going to list these ones as Silent Auction items this time around so if you're looking for an EKOL blank gun, I have one of each of the following versions for sale:
Act fast if you want one!
Buy EKOL ASI Full Auto Machine Blank Gun in Canada
Type: Blank Gun.
Manufacturer:Bruni.
Model:ME Ranger (1873 Colt 45 Single Action Army).
Materials: Mostly Metal with wood grips.
Weight: 2.2 pounds.
Barrel: Cylinder venting with fully plugged barrel. (No Red Tip)
Propulsion: Gun powder.
Action: Single action only.
Ammunition Type: .380 Crimped.
Ammunition Capacity: 6 rounds.
FPS: N/A.
Trigger Pull: The trigger pull on the Bruni ME Ranger Colt 45 Single Action Army Revolver is very light as it is a single action revolver and most of the effort is done by pre-cocking the hammer. All you are doing is releasing the hammer which with the ME Ranger is nice and light with next to no creep.
Accuracy: NA.
Build Quality: The overall build quality of the Bruni ME Ranger is nice an believable. It has good weight to it and the finish is not perfect but you would not expect and Single Action Army styled revolver to be perfect. All the mechanical parts felt tight and functioned perfectly for me.
Realism: The Bruni ME Ranger Blank Revolver is a pretty decent replica of a real Colt 45 Single Action Army Revolver in terms of size, weight and most general appearances. It does lack the 45 caliber larger more open Cylinder holes as it is chambered in .380 caliber but you can only see this when looking from the forward position of the ME Ranger. My version also had the plugged barrel so all flame and gasses emit from between the cylinder and the back of the barrel, it would be nice to un-plug this barrel so some of the gasses and flame would come out the front of the barrel.
Purchase from: A private collector.
Pros:
Well made, materials fit and finish is all very good.
True to the original 1873 Colt Single Action Army Revolver.
Real wood grips.
Nice light single action trigger.
Made in Italy.
Cons:
Not fornt venting.
9mm P.A.K. blanks do not fit - too long.
Wood grips are a bit bland.
Comments:
As my first replica Old West Single Action Blank Revolver, it is a nice addition to my collection. It would make an awesome prop for any cowboy or cowgirl costume, maybe I can convince my wife to go as a cowgirl this year for halloween ;) Overall I really like the Bruni ME Ranger and I plan to perhaps open the barrel up so that I get a more realistic shooting experience with flames and smoke coming out the front of the barrel. That and perhaps some work on the grips to give them a more rugged and weathered look.
My Vimeo Full Video Review for the Bruni ME Ranger Blank Revolver:
I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).
These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).
So make sure to get in on the savings and the chance to get your order free!
In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!
Here is a sample of some of the items on sale right now...
Type: Pellet Revolver.
Manufacturer:Crosman.
Model:357.
Materials: Metal and plastic.
Weight: 1.75 pounds.
Barrel: 6 inch, rifled.
Propulsion: 12 gram CO2.
Action: Revolver - single and double action.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 10 shot rotary magazine.
FPS: Up to 435.
Trigger Pull: The trigger pull on the Crosman 357 is decent in both single and double action. Single action is much shorter and lighter but not overly light with just a very short break to it. In double action it does get heavier and much longer as is expected. People with small hands may have to adjust their grip so they will have enough extension for the entire trigger pull, this is partially because of the larger grips that sit far back on the revolver frame.
Accuracy: I found the Crosman 357 pellet revolver to have excellent accuracy, getting about a 1 inch grouping from 30 feet out in a semi rested position (sand bag up front, standing in the back). I also put 6 rounds through my Chrony Chronograph and the Crosman 357 averaged 402 fps using RWS 6.9 grain lead pellets.
Build Quality: The Crosman 357 CO2 Pellet Revolver uses a combination of metal and plastic and has a good overall weight and feel to it. There could be more metal (like in the outer barrel) but Crosman used metal parts where they really needed to be like in the main frame, trigger, hammer, CO2 area and inner barrel. This air pistol has been around for a long time and so you can count on all the bugs being worked out. You will not find a great amount of detail in the Crosman 357 and some of the joints seem a bit unrefined but overall it is a nice looking airgun and feels well made.
Realism: The Crosman 357 is a replica of the Colt Python 357 Magnum and overall looks similar in shape. I would have liked to have seen a full swing our cylinder but this would have meant a complete redesign and the Crosman 357 main design goes back to the early 80's. Yes there are some newer revolver styled airguns like the Dan Wesson that have full swing out cylinders (BB only) but I still would have liked to have seen this, maybe on a future updated revision?
Available in the:Replica Airguns Store.
Pros:
Inexpensive Pellet revolver, not really any other pellet revolvers out there to compare to.
Good usage of metal parts. (Metal trigger, hammer, frame, barrel, CO2 tab screw).
Single and double action trigger.
Excellent accuracy and good power with a reasonable amount of shots per CO2.
Can mount optics on the dove tail railed barrel.
High capacity 10 round removable magazine.
Fully adjustable rear sight.
Cons:
Outer barrel is plastic.
Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.
Some of the finish detail could be better (seems).
A slight recess on the inner barrel would have added to the realism.
Comments:
Reviewing this fun Crosman Pellet revolver was a bit of a walk in the past for me. back when I was in my early teens I had one and it went with me on just about all of my back woods adventures. I'd have to say I learned how to shoot with this pistol and it felt right at home back in my hands after all these years... Back in the day I didn't do any scientific testing with my Crosman revolver but I can tell you it shot hard and true then, just like it does now! I'm not sure why I held out so long getting another one, the price is right and if you are looking for a nice multi-shot pellet pistol with excellent accuracy and good power for well under $100, the Crosman 357 might just be for you.
Sorry for not posting any videos for almost a week but the kids are back to school and I was also away in Whistler on a short family get away for the first half of the week. So I thought I would put together a quick Update video to show off some new products added to the Canada Replica Airguns Store and also an upcoming product review of a Crosman Pellet Revolver.
In this video Update I show you around two KWC Airsoft pistols, the Sig Pro SP2022, and the Taurus PT 24 (24/7), both of which I just added to the Canada Replica Airguns Store. I also show you a very nice alternative to the Cybergun Sig Sauer P226 X-Five - the KWC Equivalent which almost exactly the same but with an adjustable rear sight, flared magwell and an unlicensed slide.
One air pistol I get asked to review over and over again is the Crosman 357 .177 caliber pellet revolver and so I contacted Crosman and they where kind enough to send me one for review, so keep checking back for that one, it will be coming up soon.
I also show off an assortment of Airsoft Magainzes and Airgun Magazines recently added to the Replica Airguns Canada Store.
Oh-yh, one more thing. I briefly mention an upcoming contest/giveaway that will coincide with my 10,000,000 YouTube Channel Video View that should be happening in the next couple of week!
Watch my Vimeo Video of this Update Video:
I haven't had a blank gun Silent Auction for a few months now. Not too many people are willing to give theirs up here in Canada. Today I am featuring two very good condition EKOL blank guns, both front firing and in Satin finish and both full size and full weight 15 round double stack semi auto shooters. The EKOl Dicle is semi auto only while the Jackal Dual has a selector switch for shooting in semi auto or full auto. The EKOL Dicle comes with it's original hard shell case, manual and flare adaptor while the EKOL Jackal Dual does not have a case but does come with a flare adaptor.
Remember the Silent Auctions for blank guns are primarily for my Canadian customers as blank guns are very hard to come by here in Canada. If you are interested in bidding on one or both of these guns, please send me an email with your highest bid to mike@replicaairguns.com. This Silent Auction end date is August 24th at midnight so get your bids in ASAP.
If you are US based you can order a front firing EKOL Blank gun from my US Replica Airguns Store.
You can also check out my full reviews on both these guns:
Watch my YouTube video showcasing these two Silent Auction EKOL Blank pistols:
Type: Blank revolvers.
Manufacturer:RÖHM.
Model:Le Petit RG 56 & Little Joe.
Materials: Mostly metal with plastic grips.
Weight: 472/134 grams.
Barrel: Front firing.
Propulsion: Gun powder.
Action: Revolver, single & double action/Single action only
Ammunition Type: .22 caliber crimped blanks (6mm Flobert).
Ammunition Capacity: 7/5 rounds.
FPS: NA.
Trigger Pull: The trigger pull for both ROHM Le Petit and Little Joe blank revolvers in single action is nice and light. The action for both blank revolvers is very solid so cocking both guns requires a firm grip, the ROHM Le Petit also allows for double action shots and while it takes some force, the mechanics are very smooth and you can really feel the German quality in the hammer and trigger.
Accuracy: NA.
Build Quality: Even though both revolvers are made as blank/signal guns and do utilize scaled down metals (not high pressure gun steel), they are made very well and many of the internal mechanical parts, pins and screws are solid steel. The fit and finish is excellent and both guns worked flawlessly for me in my testing.
Realism: Both ROHM blank Revolvers are derivatives of similar real guns (Freedom Arms and RG 22) but again have been made from the ground up to be blank guns and can not be converted in any way shape or form to fire live ammo. The quality and feel is very believable, they also both fire out the front of the barrels and can shoot 15mm flares with the required flare adaptors attached.
Available in the: Replica Airguns Store
Pros:
Sold metal construction.
Excellent fit and finish.
Made in Germany.
Shoot lesser expensive .22 caliber crimped blanks.
Can also shoot 15mm flares with appropriate flare adaptor attached.
Come in gift box with cleaning rod and manuals (Le Petit RG-56 also comes with flare adaptor)
Cons:
Real wood grips would have been a nice touch but could be added later.
Little Joe does not come with a flare adaptor.
Comments:
We now have some blank guns that seem to be somewhat available in Canada... At least for now! And even though some of the other blank guns I was selling may have been more to the liking of the folks that where looking for a semi auto styled blank gun, the good news is both of these guns are very high quality and revolvers in general are very dependable. I also like the fact that both of the ROHM Blank Revolvers are fairly compact and so if you want to take them with you out on a hike or in the back country, they will not take up much room or add too much weight, but are still ready if required to scare off something bigger or more dangerous than you!
After what has been a very long absence of any new Blank (Flare Guns) in the Replica Airguns Canada Store, I managed to find a supplier for some very high quality German made .22 caliber compact revolvers. These two ROHM (RÖHM) blank revolvers are almost all metal with the exception of the grips and for their size are very hefty. The ROHM Le Petit RG-56 and Little Joe both come in a nice gift box with the manual and cleaning rod while the larger RG-56 also included a flare adaptor.
RÖHM Le Petit RG-56 .22 Blank Revolver:
RÖHM Little Joe Ultra Compact .22 Blank Revolver:
The RÖHM Little Joe Ultra Compact .22 Blank Revolver is a very high quality German made almost all metal super compact blank gun that uses affordable .22 caliber acorn blanks. It is ultra compact, front firing and has a 5 shot cylinder. The RÖHM Little Joe comes presented in a gift box with a manual and cleaning rod.
Type: BB air revolver.
Manufacturer: UmarexUSA.
Model:Smith & Wesson 327 TRR8.
Materials: Mostly metal with some plastic construction.
Weight: 2.3 pounds.
Barrel: 6 inches, non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 6 rounds.
FPS: 400fps.
Trigger Pull: The trigger pull on the Umarex Smith & Wesson 327 TRR8 is good in both single and double action, I wouldn't say it isn't supper light in either action but pretty decent overall. I found shooting in single action to be the most precise as the release point is instant. Shooting in double action was also fairly predictable.
Accuracy: The results I got shooting my 6 round group from a 20 foot out position where none other than impressive and I would have to say the 327 TRR8 shot the best group (just over a 1/2 inch) I have ever recorded using 4.5mm steel BB's. I'm not even sure if I have bettered these results using pellets from a rifled barreled pistol? This goes to show you how well an accurate BB gun can perform when shooting from a reasonable distance.
Build Quality: With the Umarex S&W 327 TRR8 Revolver being mostly metal, you would expect it to have a decent build quality and I am happy to say it does. Everything looked and fit well, the CO2 Revolver had good heft to it and I had absolutely no problems shooting this gun. My only real reservation is the plastic CO2 screw tab but so far with my other guns that have the same type of tabs, they are holding up well.
Realism: The Umarex Smith & Wesson 327 TRR8 is very realistic in terms of looking and operating as a revolver with it's brass shell casings you load juts like a real revolver, so yes it feels realistic and even looks a lot like a S&W 327 TRR8 to some degree. With that said, Umarex has taken some liberty on this one most likely because it is built off an existing airgun frame and to make it into a true 327 TRR8 replica would have required a complete redesign. I would have to say the Umarex S&W M&P R8 is actually a closer 327 TRR8 Replica than the gun reviewed in this video.
Available in the:Replica Airguns Store
Pros:
It's a revolver with actual shells! Gives you the feeling of loading and shooting a real revolver.
Almost all metal design.
Lots of detail in this gun, very well made, fit and finish is excellent.
Excellent power, accuracy and shots per CO2.
Adjustable fiber optic sights.
Lots of places to mount accessories.
Cons:
Plastic CO2 screw tab could cause problems down the road?
Only shoots BB's - why not make a pellet version with a rifled barrel?
Actually shoots 6 rounds not 8 like the real version of this revolver.
Comments:
What's not to like about this Umarex Smith & Wesson Revolver? It's built very well, it most certainly looks good, it has the best tested accuracy I have seen so far from a BB gun, it shot even higher velocities than claimed, it gets tons of shots from a single CO2, and it loads up just like a real steel revolver but at a fraction of the cost to shoot! If you want to customize yours you have plenty of options with two weaver mounts top and bottom and it comes in at a very reasonable price tag!
I have a rare EKOL LADY blank gun for you today listed as a silent auction item, this blank gun is a front venting model so the barrel is semi-plugged but all the flames and smoke vent out the front of the barrel like a traditional gun.
This EKOL LADY 9mm P.A.K. Blank Pistol in Satin is previously owned, it has been fired but is in very good condition. It comes in a hard shell foam lined plastic case.
Please submit your silent auction offers to me by no later than June 27th midnight! (Silent auctions are for our Canadian customers looking to by blank guns in Canada) participants can send me an email with their top bid on the item listed and the highest bid wins this auction). *Local tax plus shipping & handling will be added.
Good luck to all participants!
If you reside in the US, you can also buy the EKOL Firat new from us in our US Replica Airguns Store.
I just received some of my ASG Airsoft guns in my BC location and wanted to make an update video for you so you can see them up close and perhaps see how they stack up against their Airgun counterparts. Keep in mind many of my ASG guns are only available in the Canada Replica Airguns Store, we do have some ASG Airsoft guns for my US based customers but this time here in Canada I have more to offer my Canadian folks!
The Dan Wesson's, the Steyr M9-A1, STI Duty One 1911, CZ 75 P-07 Duty are all pretty much identical to my 4.5mm Steel BB shooting versions with the exception of not having blowback but the good news is the slides do in fact move on the semi autos! Of course the Dan Wesson is just made to accept 6mm Airsoft BB's rather than 4.5mm steel BB's.
I am also super impressed with the high quality of the LMT Defender M4 Carbines, they are a serious bit of gear and have some very good heft to them, even more so than my full metal King Arms M4A1 I already sell and have done a full review of, not to take anything away from the Kings Arms product as it is very good at its price point.
I also received my first sniper rifle and have played around with it a bit to see what it is capable of. I added a bipod to the front and a 3x9 power scope as the ASG AW .308 comes pretty bare bones but ready for all you can throw at it. I can say it likes heavier Airsoft BB's, as the .20 gram ones I started with seemed to fly off in all directions due to the high velocity, even stepping up to a .25 gram BB tightened my group up significantly at 30 feet. I have heard this rifle really prefers heavy Airsoft BB's so I plan do do my review based on that information.
Enjoy my Vimeo Video Update focusing on the new ASG Airsoft lineup.
THIS SILENT AUCTION IS NOW CLOSED
I have another EKOL Firat Magnum blank gun for you today listed as a silent auction item, this one is a top venting model so the barrel is plugged and all the flames and smoke vent out the top of the barrel, not the front. The EKOL Firat has always been a popular seller here in the Replica Airguns Store.
This EKOL Firat Magnum 9mm P.A.K. Blank Pistol in Gloss Black is previously owned but has low usage and is in very good condition. It comes in a hard shell plastic case with the manual, and field stripping key.
Please submit your silent auction offers to me by no later than June 5th midnight! (Silent auctions are for our Canadian customers looking to by blank guns in Canada) participants can send me an email with their top bid on the item listed and the highest bid wins this auction). *Local tax plus shipping & handling will be added.
Good luck to all participants!
If you reside in the US, you can also buy the EKOL Firat new from us in our US Replica Airguns Store.
Type: Blank Gun.
Manufacturer:UMAREX USA.
Model:SW1911 S
Materials: Mostly Metal with rubber grips.
Weight: 2.2 pounds.
Barrel: Top venting with fully plugged barrel.
Propulsion: Gun powder.
Action: Single action only.
Ammunition Type: 9mm P.A.K.
Ammunition Capacity: 8-10 rounds.
FPS: N/A.
Trigger Pull: The trigger pull on the Umarex SW1911 S is actually fairly heavy which I found a bit surprising because it is a single action only gun. I found myself thinking a few times that the gun may have misfired but realised that I just needed to pull the trigger a bit firmer. This can be good in that the gun will not easily or accidentally go off and since accuracy is not a factor it is not a big deal.
Accuracy: NA.
Build Quality: The overall build quality of the SW1911 S is fantastic. It is one of the nicest blank guns in terms of overall build quality and finish quality. The tolerances are very tight and the quality of the workmanship is top notch. When holding the Umarex SW1911 it has a lot of mass to it and feels just like a real 1911 in the hand. This blank pistol is made in Germany!
Realism: The Umarex SW1911 S is a replica of a Smith and Wesson 1911 semi auto pistol but I could not find an exact match to a specific model they currently make. It is licensed and branded by Smith & Wesson and in terms of looking like a real steel gun it is bang on with the exception of the exhaust notch that is cut into the top of the slide. Interestingly enough I think Umarex may have not even needed to cut out this notch as my slow motion video shows that all the burn off happens before the slide even starts to move.
Purchase from: The US Replica Airguns Store.
Pros:
Very well made, materials fit and finish is all very good.
Two-tone finish looks very nice.
Very true to the original 1911 - (A1 styled).
Love the nice rubber wrap around grips.
I was able to fit 10 rounds in the magazine (2 extra)!
German made quality.
Cons:
Top venting.
Notch cut out of slide takes away from the realism a bit.
Magazine can be a bit tuff to get in (pressing the magazine release helps).
Heavy trigger pull on mine.
Comments:
Even though the Umarex SW1911 S had a few shortcoming like being a top venting gun, having the notch cut out of the slide and perhaps a bit heavy of a trigger, I still really like it! The quality is evident throughout this fine German made blank gun and you can just tell it's made right. This is also my first true replica blank gun as it is fully licensed by Smith & Wesson, something that has been lacking in all my other blank guns because of our Canadian importation laws. I really wish I could get my hands on some more "replica blank guns" as I don't mind giving up the front firing for top venting to obtain a blank gun that is a true replica.
As promised, the new ASG Airsoft Pistols have been added to the Replica Airguns Store and by the way none of them have the orange tip as they are all classified as Uncontrolled Firearms just like a standard Airgun!
Dan Wesson Airsoft Revolvers:
The legendary revolvers licensed by Dan Wesson These revolvers have authentic markings and an individual serial number stamped into the frame. The revolvers features a single and double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson BB revolvers are made of metal except for the ergonomical grip constructed in hard ABS plastic.
Dan Wesson Revolver - 4 inch Silver (Airsoft)
Dan Wesson Revolver - 6 inch Silver or Grey (Airsoft)
No orange tip!
6mm Plastic Airsoft BB's
CO2 powered
6 rounds
453 fps
2.25 pounds
11.7 inches
Single and double action
All metal design
licensed markings
Dan Wesson Revolver - 8 inch Grey (Airsoft)
CZ 75 P-07 Duty Non-Blowback (Airsoft)
The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer Česká zbrojovka, Czech Republic. This is the semi automatic 4.5mm airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the Airsoft BB’s are put in the drop-out magazine.
The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number.
Steyr M9-A1 Non-Blowback (Airsoft)
The ASG Steyr M9-A1 Non-Blowback CO2 6mm AIrsoft BB pistol is a faithful copy of the real model Steyr mannlicher M9-A1 complete with licensed trade marks and a functional safety pin. You will get over 465fps shots from the 14 round drop out magazine and just like the real steal you can add a laser site or tactical light to the weaver style accessory rail.
Just a quick heads up for our Canadian customers waiting on Dan Wesson Revolvers, the ASG Airguns and some Airsoft guns have now cleared customs, we still have some more Airsoft guns from ASG coming down the road but at least we have some to start with for now.
PLEASE KEEP IN MIND that we have a very large backorder list and we will be doing our best to send out the backordered Dan Wesson starting tomorrow. It will take some time to get caught up so please try to avoid sending us an email about your backordered Dan Wesson, we are working very hard to get them to all of you and will update everyone with a tracking number as soon as yours ships.
If you are interested in some of the ASG Airsoft guns then make sure to check back over the next few days as I update our Airsoft guns section or our Canada Replica Airguns Store with the new ASG Airsoft items.
Photo of ZORAKI 917 Removed by Request from Glock "Renzulli Law Firm"
All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"
When ever I can get my hands on some blank guns at a realistic price or perhaps a trade that works for both parties, I generally try to make it happen. And if they are guns that I don't have in my collection, well they go directly into my collection so please no offers from fellow Canadians as I tend to hold onto my more rare or hard to acquire Canadian replica guns pretty firmly! .
Both of these 9mm P.A.K. Blank shooting guns are not brand new but they are in very good condition and it's hard to even say it they have been shot or not? My new Zoraki Mod. 917 as you can see, is styled very closely after the NAME REMOVED and so much so that all new version sold in North America must have "This is not a Glock" engraved on the right side frame of the receiver in order to be sold. Mine however was purchased before this requirement :) UPDATE: NO LONGER BEING SOLD IN NORTH AMERICA.
Photo of ZORAKI 917 Removed by Request from Glock "Renzulli Law Firm"
My Umarex SW1911 S is licensed by Smith & Wesson which makes it pretty hard to get in Canada becasue for a very long time we have not been allowed to import any replica guns and since it is licensed it makes it a true replica and would normally be stopped at the boarder. You may own replicas in Canada without a said license but you need to make sure they are stored and handled as defined by the requirements outlined in the Canada Firearms Act.
The S&W 1911 S is for sale in my US Replica Airguns Store for my US customers.
I will be reviewing the Umarex SW1911 but not the Zoraki M917 as I have already reviewed a Chrome Slide version of it.
We have been waiting a while here in Canada for some of our ASG products to come back in stock. ASG provides us with our Dan Wesson line and the Dan Wesson Revolvers have been a very popular airgun to say the least. We did manage to get a few of them, mainly to fill some of the earlier back orders but this big order had to come by cargo ship and now it has arrived and has been with Canada customs for about a week so we should be close to having them for you!
The hold up on this shipment is because we have some ASG Airsoft guns in with the regular Airguns which is good news as we will soon be stocking some very nice ASG Airsoft Pistols and Rifles but the new Airsoft guns are the main reason that Canada Customs is taking their time giving their OK on this shipment.
My advice to anyone who has been waiting a long time for their Dan Wesson Revolver (Mostly the 2.5 & 4 inch versions) is to hold on a bit longer because the wait is almost over and we will sell out of these guns quickly so having your backorder in guarantees you will get yours.
