I have review all three of these super fun Full Auto CO2 BB Rifles so make sure to watch those YouTube Field Test Video Shooting Reviews to see how they performed on their own in the Sea Can Indoor Airgun Shooting Range.
In this Field Test Shooting Video I have a little bit of fun to see which of the three Full Auto CO2 BB Rifles is the King in terms of FPS Velocity and all out full auto mag dump acuracy.
All there of these BB Rifles are awesome and I highly recommend picking one up or maybe even all of them! You can get them in our Canada and US Replica Airgun Stores…
Perhaps you might call this a followup video since I already made a full Field Test Shooting Video of the all black version of this pistol and you may wonder if the color of a gun could in some way effect how it performs? Well I don’t think color would really matter but it has been over 6 years since I did my original Field Test Shooting video fo the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver and so perhaps some things have changed, maybe my shooting is better or worse? At any rate let’s find out.
Starting off with my Chronograph test I was able to get an average 6 shot velocity of 348 fps which is about 40 fps less than my testing 6 years ago of 390 fps, perhaps the temperatures where a bit different? Perhaps the valve setups of the guns was not the same? By the way the temperature was 23 degrees Celsius in the indoor Airgun Sea Can Shooting Range and I was using a brand new 12 gram CO2 along with 5.1 grain zinc coated steel BB’s.
Moving on to the accuracy test, surely I would get a similar 1 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver, after all it’s been 6 years and I must be a much more advanced shooter… Well there again the Chrome Umarex Colt Python 357 Magnum CO2 BB Revolver did not perform as well as the black one from my 2014 Field Test? Again maybe the steel BB’s I was using where not of the same quality? Maybe I simply had one too many espresso shots? As the video shows this time around I was only able to get about a 2 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver. Still not bad but I was hoping for better result or at least the same as before.
I could do this test again and get completely different results using perhaps another brand of CO2 on a warmer day with higher quality Steel BB’s and just maybe with me on my game a little bit better? At the end of the day 350 fps is perfectly fine for putting holes in pop cans and a 2 inch group at 30 feet will get you on most targets every time so I’m not going to sweat it too much. If you are looking for a shell loading CO2 BB Revolver the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is for sure one of my top picks.
Type: BB air revolver Manufacturer:Umarex. Model: Colt Python 375 Materials: Almost entirely all Metal. Weight: 2.75 pounds (1218 grams). Barrel: 5.5 inches, metal non-rifled. Propulsion: 12 gram CO2. Action: Revolver, single & double actions. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 6 round cylinder. FPS: 400.
Trigger Pull: The trigger pull on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is good in both single and double action, it’s nice that you have the shorter lighter single action trigger for slower more accurate shooting but you can also blast away in double action when you feel like it. The hammer on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is firm with not very much wiggle which some other revolvers in this category do have.
Accuracy: Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.
Build Quality: The Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver being mostly metal has a very good build quality and is on par with the Dan Wesson 715 shell loading revolver. It has a nice weigth adn balance to it and feels really good in the hand! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time compared to the black finishes fodun on most KWC made Airguns.
Realism: TheUmarex Colt Python 357 Magnum Chrome CO2 BB Revolver overall is a close copy a the real steel Colt Python 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that, this pistol is super close to the original Colt Python 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands and noise to be had.
Pros:
Shells loading revolver give you the feeling of loading and shooting a real revolver.
Mostly all metal design.
Lots of detail, well made, chrome looks nice, not sure if it will wear better than the black finish found on most KWC made pistols?
Good overall weight, almost 3 pounds.
Should have good overall power, accuracy and shots per CO2 (based on my previous Colt Python testing).
Fully adjustable sights.
Well hidden CO2 Screw.
Recessed barrel.
Nice Trigger pull in both single and double action.
Cons:
Grips are a bit rough and wood grain is only OK.
Grips may be a bit large for people with small hands.
Decent enough Colt Python 357 replica but the frame is a bit long between the cylinder and the hammer.
Comments:
It’s been a while since I reviewed a Shell Loading Airgun and this one is pretty much the same Airgun I have reviewed in the past in both the KWC and Umarex Distributed forms. It has been almost 6 years since I took a look at one on my table and it still hods up today. I plan on performing another Field Test Shooting Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver to see if I can replicate the same good results I did back in 2014 when I tested it out on my deck. If you’re looking for a shell loading revolver in the 357 design then for sure checkout the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver as an option.
My Vimeo Table Top Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver:
This is a combined Filed Test Shooting Video for the KWC 2022 NBB - 24/7 NBB - 24/7 Blowback CO2 BB Pistols. I already made an update video for these KWC Steel BB Pistols since they are slightly different version I have not covered in any video beforehand.
As per my typical Field Test Shooting Videos I first place 5 shots through my Chronograph to test out the real world fps of each gun. I then shoot 10 rounds on a paper target setup 30 feet away using a seated and rested shooting position. My ammo for this test was 5.1 grain zinc coated 4.5mm Steel BB’s for all airguns along within a brand new 12 gram CO2. The temperature in my indoor Sea Can Airgun Shooting Range was around 25 degrees Celsius (77 degrees Fahrenheit) for this test.
First up was the KWC 2022 NBB 4.5mm CO2 Steel BB Pistol with an average five shot fps of 347. The KWC 2022 NBB 4.5mm CO2 Steel BB Pistol was the least accurate of the three Airguns tested on this day getting about a 5-6 inch 10 shot grouping. I did notice when I went to edit the video that it did shoot a double shot on the first shot which lowered that first shot making the group a bit larger. This may have been as a result of pulling the trigger with the safety on right before which probably loaded a round into the barrel followed by the second pull loading a second BB into the barrel.
I then tested out the KWC 24/7 NBB 4.5mm CO2 Steel BB Pistol which was by far the most powerful Airgun tested out of the three hitting a top fps of 452 with a five shot average of 420 fps! The KWC 24/7 NBB 4.5mm CO2 Steel BB Pistol was also fairly accurate getting a nice 2 inch 10 shot grouping, slightly to the left and just under the bullseye. Nothing wrong with that!
The last KWC 4.5mm Steel BB pistol for the day was my KWC 24/7 Blowback CO2 4.5mm Steel BB Pistol. The only only blowback single action shooter out of the bunch. As expected from a blowback CO2 Airgun the fps was lower averaging just under 300 fps (298 to be precise). The surprise of the day was the accuracy from the KWC 24/7 Blowback CO2 4.5mm Steel BB Pistol was the best out of this test group getting really close to a 1 inch grouping very well centered just a tad to the right but with near perfect elevation.
Depending on what you are going for, all of these Airguns are great choices. If you want ultimate power perhaps go for the KWC 24/7 NBB 4.5mm CO2 Steel BB Pistol with its 450+ fps, if you want accuracy and realism then I would suggest the KWC 24/7 Blowback CO2 4.5mm Steel BB Pistol with its full blowback action and excellent accuracy.
You’ve seen them all before but have you seen them in this exact configuration? All the Airguns I show off in this video are made by KWC and generally come in either Steel BB and or Airsoft versions along with non-blowback and blowback versions. You can even find most of them redistributed by other companies like Umarex, Cybergun, Gletcher, Crosman and others even licensed in some cases.
The versions I am showing today I have not review yet in these exact configuration and all of them are the KWC made and distributed unlicensed versions, so nice and clean with virtually none of that ugly white lettering on them…
This Field Test Shooting Review for the Daisy Powerline 340 Spring BB Pistol is a lot different from most of my other shooting video reviews mainly because the Daisy Powerline 340 Spring BB Pistol is not a CO2 powered BB Pistol like pretty much every other 4.5mm Steel BB pistol I have ever tested. There are way more 6mm Airsoft spring pistols but when it comes to actual 4.5mm BB Pistols they are not very common. The Daisy Powerline 340 Spring BB Pistol is Kind of like the pistol version of the Daisy Red Ryder BB Rifle…
So let’s get right into the nitty gritty on how the Daisy Powerline 340 Spring BB Pistol performed in the Replica Airguns Indoor Sea Can Airgun Shooting Range. Starting off with the feet per second velocity for the Daisy Powerline 340 Spring BB Pistol Daisy claims around 240 fps. shooting about 8 shots through my chronographs with standard 5.1 grain 4.5,, steel BB’s I was able to get an average of just over 180 fps, the Daisy Powerline 340 Spring BB Pistol was super consistent shooting all shots between 181 and 189 fps.
I then proceeded to place 10 shots on my paper target setup 30 feet down range shooting from a rested portion with a sand bag up front supporting my hadbn’s and a stool to sit on in the back. The Daisy Powerline 340 Spring BB Pistol did shoot a bit low and to the left but all 10 shots grouped within 3 inches of each other, actually a bit better than I was expecting from a low cost BB Pistol like this. If I was shooting at a pop can and adjusted my aim point a bit I would have hit the can 10 out of 10 times which is about as good as you can ask for a plinker like this.
The best way I can describe the Daisy Powerline 340 Spring BB Pistol is the pistol equivalent of the Daisy Re Ryder in that it shoots 4.5mm Steel BB’s has a high capacity BB reservoir that holds lots of BB’s and you are required to cock the spring for each shot rather than use CO2 for power. This makes for an over low cost Airgun but like the Daisy Red Ryder it is a lot fo fun to shoot at the end of the day. The Daisy Powerline 340 Spring BB Pistol has a surprisingly good trigger and at the end of the day shot really consistently for me.
Type: BB Pistol. Manufacturer: Daisy Model:Powerline 340. Materials: Mostly metal construction. Weight: 1 Pound (454 grams). Barrel Length: 4-5 inches Total Length: 8.5 inches. Propulsion: Spring Action: Single action only. Ammunition Type: 4.5mm steel BB’s. Ammunition Capacity: 13/200 round magazine. Max FPS: 240 fps.
Trigger Pull: The Daisy Powerline 340 Spring BB Pistol has a single action only trigger. You will have to pull the slide back for each shot as this motion draws the spring back and also cocks the hammer. The trigger pull is fairly decent with about a quarter inch of take-up followed by a light predictable release. There will not be any action shooting since the trigger is not double action and the fact that the slide must be pulled back for each shot.
Accuracy: So far I have not made my Field Test Shooting Video for the Daisy Powerline 340 Spring BB Pistol but I did take it outside for some good old plinking to see how it would perform causally shooting in the yard. The Daisy Powerline 340 Spring BB Pistol shot a bit harder than I was expecting it to and I was even able to hit targets a good 50 or so feet away but did have to account for some trajectory arch. Accuracy seemed good in general without a lot of need to adjust my aim point as the sights seemed well centered out of the box which is good since they are not adjustable.
Build Quality: The build quality of the Daisy Powerline 340 Spring BB Pistol is nothing exciting as it is mostly plastic with a metal barrel and perhaps a few other internal metal parts. Being that the Daisy Powerline 340 Spring BB Pistol is mostly plastic it only weighs in at about a pound but feels good in the hand. Everything feels pretty solid on the airgun with good overall fit and finish.
Realism: In terms of realism the Daisy Powerline 340 Spring BB Pistol is a good replica of a Beretta 92 in terms of looks and size comparison. Other than the open slide area that exposes the inner barrel being shorter than a real steel Beretta (probably to accommodate the internal spring) the Daisy Powerline 340 Spring BB Pistol looks very close to a Beretta 92. Moving parts include the slide, hammer, magazine release and slide catch release which is actually the safety. Even the magazine is drop out and near full size. I also like that there are no perceivable screw holes which is usually the case with these types of low cost all plastic Airguns when they are basically two halves slapped and screwed together.
Pros:
Pretty decent replica of a Beretta 92 in general.
For an inexpensive Airgun it has a lot of working parts that make it more realistic.
Very low cost to buy and operate, no CO2 required (Under $40 in Canada Store right now).
Has a recessed barrel for added realism.
Single action only trigger is not overly long or heavy.
Lots of ammo stored in the internal hopper so no need for a lot reloading.
Safety actually looks like part of the gun built into the slide catch release.
Full size dropout magazine.
Weight and feel of gun are pretty good considering so much plastic.
Cons:
Not super high in the fps department.
Need to cock the slide for every shot so not going to be an action shooter.
Made in China.
Comments: The Daisy Powerline 340 Spring BB Pistol is one of those low cost yet kind of fun BB guns that as long as you don’t have super high expectations you will get a ton of fun out of for very little cost. At about $40 Canadian with a bit more for some 4.5mm steel BB’s you are ready to shoot all day long. I was a bit surprised at how decent of a little BB gun the Daisy Powerline 340 Spring BB Pistol is. It looks real enough, has a decent build quality to it, actually shoots pretty good with a nice trigger and for such a low cost airgun it has a lot going for it like lots of working parts and even a removable full size magazine that doubles as a 200 round hopper with 13 round internal magazine. I don’t think anyone will be disappointed buying the Daisy Powerline 340 Spring BB Pistol and it would make a perfect first BB gun for a younger person looking to get started out in the sport.
My Vimeo Table Top Review for the Daisy Powerline 340 Spring BB Pistol:
Type: Pellet Revolver. Manufacturer: Gamo Model:PR-776. Materials: Mostly metal construction. Weight: 2.2 Pounds (1 kg). Barrel Length: 6 inches Total Length: 11.5 inches. Propulsion: CO2 x1 Action: Revolver single and double action. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 8 rounds per magazine. Max FPS: 400+ fps.
Trigger Pull: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver has your traditional revolver single and double action trigger setup. In double action, the trigger is going to be a bit longer and heavier but it feel fairly smooth with no real friction points and I would consider it to have a medium trigger pull. When you cock the hammer back placing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver in single action, the trigger pull becomes very short with virtually no take-up at all and the weight of the trigger is very light allowing for more accurate shots.
Accuracy: Make sure to watch my Field Test Shooting video for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I test out the velocity and accuracy in the Replica Airguns Indoor Airgun Shooting Range. In summary the Gamo PR-776 CO2 .177 Caliber Pellet Revolver shot a little bit hotter than claimed at just over 400 fps using around 7 grain lead pellets. In terms of accuracy with a total of 16 shots the grouping spread out to around 4 inches but I am pretty sure a different pellet choice may have made a difference.
Build Quality: The build quality of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver is pretty good overall. It is mostly all metal with the exception of the grips of course, Fit and finishes looks good, everything feel snug adn tight with the exception of the pistol grips. I feel like the grips could easily move out of place and get caught on something. This is not a problem when shooting, more so when in a holster. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver feels good in the hadn't, nice and solid and with a good weight to it.
Realism: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver is a decent looking Airgun in the style of a traditional revolver, I wouldn’t say it’s an exact replica of any specific revolver in production but it does tick off all the boxes in terms of looking realistic. The weight and feel for now and the Gamo PR-776 CO2 .177 Caliber Pellet Revolver also has a recessed barrel and hidden CO2 crew. The only real giveaway would be the cylinder size as it is a bit smaller than expected and of course is chambered for .177 caliber pellets.
Pros:
Good power over 400 fps using actual lead pellets.
Quicker reloading over shell loading revolvers
More shots per magazine reload, 8 versus 6.
Comes with two metal 8 round magazines.
Traditional single and double action trigger.
White dot front sight with fully adjustable rear sight.
Good weight and feel to it.
Fit and finish look good.
Recessed barrel for realistic looking barrel opening.
Should be able to use a dovetail type scope mount for adding on a red dot or magnified scope.
Cons:
Not a fan of the loose pistol grip setup to access the CO2.
Was hoping to get a bit tighter grouping but may have been a pellet choice issue.
Comments: It was nice reviewing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver as it was a bit different then most of today shell loading revolvers. I like that the Gamo PR-776 CO2 .177 Caliber Pellet Revolver still offered a realistic looking cylinder that the shell loading revolvers have but with the moon clip style magazines that allow for quick adn easy reloading of 8 rounds at a time. The velocity or power of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver was even a bit high than Gamo claims using PBA Platinum pellets since Gamo claims 400 fps using these 5.1 grain lead pellets. My testing with closer to 7 grain pellets yielded fps up and over 400 fps. All the Gamo PR-776 CO2 .177 Caliber Pellet Revolver needs is to be just a little bit more accurate but I feel this may simply be more of a pallet choice, once you find a pellet the Gamo PR-776 CO2 .177 Caliber Pellet Revolver likes I am pretty sure it will deliver accurate shots.
My Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver:
Make sure to watch my upcoming Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I go over the specifications, pros and cons and show it up nice and close. In this Field Test Shooting Video I determine what the accuracy and velocity of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver by testing out the fps with my Chronograph along with a accuracy test shooting a paper target at a distance of 30 feet away using a rested shooting position.
For the velocity test I placed a brand new CO2 Cartridge in the Gamo PR-776 CO2 .177 Caliber Pellet Revolver and shot five 6.9 grain lead pellets though my Chronograph. Gamo claims their 5.1 grain PBA Platinum pellets will shoot around 400 fps so I was expecting something in the low to mid 300’s but was surprised at a five shot average of 4115 fps with the much heavier RWS6.9 grain pellets. The slowest shot I achieved was 396 fps while the fastest shot was 434 fps. The temperature was right around 24 degrees Celsius or 75 degrees Fahrenheit.
For the next section of my Field Test Shooting Review I setup a brand new paper target 30 feet down range and loaded up two eight round magazines. The results for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where a bit confusing with both eight round magazines. It seemed like most of the shots wanted to group within about 1-2 inches of each other but I was getting several outliers that extended the grouping to closer to four inches. Not the best performance but as I have found with many guns, sometimes you need to find a pellet that the gun is happy with. the wrong pellet can really make a difference and I am fairly sure this was the case with the Gamo PR-776 CO2 .177 Caliber Pellet Revolver using the RWS pellets. just not the best choice for it.
The Gamo PR-776 CO2 .177 Caliber Pellet Revolver overall performer well, like I said I really think pellet choice will be the deciding factor in how accurate it is going to be. The velocity was very good for a CO2 Pellet revolver considering I was suing actual lead pellets and not the alloy pellets Gamo was using as their reference. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver uses metal eight round magazines which are easy to preload and allow for two additional shots over the more common these days shell loading revolvers, which makes the Gamo PR-776 CO2 .177 Caliber Pellet Revolver more practical as a target pistol allowing for more power and easier loading.
Type: BB Rifle. Manufacturer: Crosman. Model: R1 AR. Materials: Metal & plastic. Weight: 6 pounds (2.7 kilograms). Length: 26.25 / 29.25 inches (Stock closed / extended). Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 rounds. FPS: 430fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman R1 CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The real fun happens with the Crosman R1 CO2 Blowback BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in mere seconds.
Build Quality: The Crosman R1 CO2 Blowback BB Machine Gun is well made all around. Weighing in at 6 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman R1 CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real AR / M4 other than the forward assist which is moulded into the receiver.
Pros:
Super realistic working M4/AR 4.5mm BB Rifle just like the otters Crosman Rifles in this lineup.
Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.
Great weight and feel to it.
Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch…)
Duel CO2 full metal drop out magazine that holds the 25 4.5mm steel BB’s as well.
Adjustable and customizable AR butt stock.
Included red dot sight and ability to add pop-up iron sights.
Lots of rails of mounting additional cool hardware.
Removable flash hider that uses standard threading.
Cons:
Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.
No iron sights included.
Comments:
The Crosman R1 CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR and Crosman MPW with more or less Cosmetic changes. Like the Crosman MPW the Crosman R1 has an AR compatible Rear stock and pistol grip, the Crosman R1 CO2 Blowback BB Machine Gun is the only Crosman AR Full Auto CO2 BB Rifle that has the ability to change out the flash hider, you can even put a mock suppression or in it if you choose to. No matter which of the Crosman AR Full Auto CO2 BB Rifles you chooses to get they are mechanically every similar and share most of the same parts. I would say the Crosman R1 CO2 Blowback BB Machine Gun is the most customizable to date but they are all fantastic Air Rifles!
My Table Top Video of the Crosman R1 CO2 Blowback BB Machine Gun:
Here we are with yet another Crosman AR styled Full Auto Blowback CO2 BB Rifle and they just keep getting better, I say that lightly as even the first version the Crosman DPMS SBR still holds up to the 3 part lineup. It kind of has to since all three of them can be mixed and matched in terms of the uppers and lowers, magazines and I am sure most intern parts. Check out the Crosman DPMS SBR and the Crosman MPW for reference as I have made full table top and field test shooting videos for them already.
The purpose as always for my Field Test Shooting Videos is to find out how the airgun being reviewed performs in terms of velocity and accuracy, and if the ratings on paper end up being the same or close to the tested results. Crosman claims the Crosman R1 CO2 Blowback BB Machine Gun is capable of shooting 5.1 grain 4.5mm Steel BB’s at up to 430 fps. When I tested the Crosman R1 CO2 Blowback BB Machine Gun using my Chronograph averaging out 5 shots using a brand new set of CO2 cartridges I averaged 395 fps. Note the temperature in my Indoor Airgun Sea Can Shooting Range was about average at about 24 degrees Celsius or right around 75 degrees Fahrenheit. Comparatively I was able to get 405 fps from the Crosman DPMS SBR and around 385 fps with the Crosman MPW. Temperature may have beene slightly different on those testing days so that needs to be factored in.
Moving on to the accuracy portion of this Field Test Shooting Review for the Crosman R1 CO2 Blowback BB Machine Gun, I placed 10 semi auto shots on my paper target setup 30 feet downrange. I was using a rested and seated shooting position to help minimize human factor. I was able to get pretty much a 1 inch grouping with my 10 semi auto shots which was nit surprising as I have been able to get tight shot placement like this from the Crosman AR series before.
I then flipped the Crosman R1 CO2 Blowback BB Machine Gun semi auto selector switch to full auto and dumped the remaining 10 rounds into my paper target in full auto mode flowed by another full 25 round magazine again in full auto and the grouping only stretched out to about 2.5 -3 inches even with all the full auto vibrations and rocking around of the gun. Shot placement was a little bit high and to the left but this can easily be corrected using the red dot sight adjustments.
In summary the Crosman R1 CO2 Blowback BB Machine Gun performed a lot like the Crosman DPMS SBR and the Crosman MPW which makes since since all of them are virtually mechanically the same. In the end I think it really comes down to which of the Crosman AR type full auto BB rifles you like the look of since they areal very capable shooters. If you can’t decide then maybe get one of each :)
Watch my Preview Video where I take a quick look at the Sig Sauer MCX CO2 Pellet Rifle and Crosman R1 Full Auto BB Rifle. Full Table Top and Field Test Shooting Videos coming soon.
The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball pistol, it has a very different look and also uses .50 caliber Paintballs which are a little bit less common than the .68 and .43 caliber paintball gun I have been reviewing up until now. The Umarex T4E TR50 .50 Caliber Paintball Revolver is some countries is marketed as a self defense gun but those versions do have a little bit more fps and foot pounds of energy. The version I am testing is not marketed here in Canada or the US as self defense products but rather as more of a training Paintball Gun.
Starting with my Chronograph velocity test I placed 5 Rubber Balls through my Chronograph using a brand new CO2. The Rubber balls I am going to say are a little bit heavier than standard Paintballs and Umarex claims the Umarex T4E TR50 .50 Caliber Paintball Revolver is capable of hitting around 360 fps so with the heavier rubber balls I was expecting a little bit under the max fps. I was able to get an average of 328 fps so not bad at all.
Moving on to my accuracy test. I need up placing 10 of my 12 rounds into the paper target as I had two rounds that went off in what I am going to call an uncontrolled manor. The 10 rubber paintball rounds that did hit my paper target that was setup 30 feet down range all hit within about 6 inches of each other daily well centered left and right and a little bit low on the target. Gettin back to the uncontrolled shots, I had a situation where I pulled the trigger and the Umarex T4E TR50 .50 Caliber Paintball Revolver went click as you would expect but no CO2 was expelled and so no round was shot. I thought perhaps the cylinder was caught up so I went to wiggle it to try and free it up. As I did so the gun went off without my finger anywhere near the trigger. I am glad I was using rubber balls since the rubber ball hit my cabinet leaning a biota a mark but really causing any damage. This happened twice with the same cylinder, the second time I was bit more prepared for it and had the gun pointed well downrange. I was not able to recreate this problem again so perhaps the cylinder magazine was not seated properly but this still concerns me a bit.
Overall I really like the Umarex T4E TR50 .50 Caliber Paintball Revolver, it’s a pretty cool looking Paintball Gun with decent accuracy and power, you can even feel a little push back and barrel lift when you shoot it. I also like that you can preload a CO2 and puncture it whenever hypo are ready to shoot with a quick smack on the bottom of the grip. Just made sure to put the CO2 in the right way :)
As always I like to test each gun out in the Replace Airguns Indoor Sea Can Airguns Range first placing 5 rounds through my Chronograph to find out the real world velocity of each test gun, then I shoot 10 rounds at a distance of 30 feet onto a paper target to see how tight of a grouping I can get shooting from a seated and rested position. When it come to full auto BB guns like the Umarex Legends M1A1 Blowback CO2 BB Machine Gun, I will usually switch up to full auto and dump the rest of the magazine to see if I can still sray on target with the remaining rounds.
For my Power or Velocity test I was using fairly new CO2, I had shot a full magazine a couple days before but the Umarex Legends M1A1 Blowback CO2 BB Machine Gun was all warmed up and ready to perform optimally. Umarex does state that it will shoot around 435 fps and with my 5 shot test I was able to confirm that with a 434 fps average. The temperature in the Sea Can was around 23 degrees Celsius or 73 degrees Fahrenheit.
For my accuracy test I setup a new paper target 30 feet downrange and proceeded to place 10 shots into it using the peep sights on the Umarex Legends M1A1 Blowback CO2 BB Machine Gun. Other than one slight flyer my 10 round grouping was around 3/4 of an inch and just a tad low of the bullseye but pretty close. I then switched over to full auto fun mode and with the remaining BB’s I unloaded all 20 rounds in about a half a second, or at least it seemed like that! The Umarex Legends M1A1 Blowback CO2 BB Machine Gun even in full auto mode with the trigger matted till the gun ran out I was still able to get a 2 inch grouping!
I’m a big fan of the Umarex Legends Series BB Guns and the Umarex Legends M1A1 Blowback CO2 BB Machine Gun may be my favorite out of all of them to date. The Thompson M1A1 is just such a stand out Machine Gun we all know from the Mob shows. Not only does the Umarex Legends M1A1 Blowback CO2 BB Machine Gun look the part but it performs I would have to say so far the best when it comes to Full Auto Machine guns at least from Umarex. I do have to say that the Crosman CO2 BB AR Series does not disappoint. That said if you are looking for a more classic BB Machine Gun that performs as good as it looks then my advice is grab yourself one of the Umarex Legends M1A1 Blowback CO2 BB Machine Gun and add it to your collection.
My systems setup for a more powerful airgun as I was shooting .22 caliber lead pellets with about 11-12 foot pounds of energy. Direct hits passing through the 3/4 inch cut outs had no problem laying down the metal paddles and resetting the paddles was a lot easier than I though it would be even way back 50 feet.
I did not have my Sig Sauer Virtus PCP .22 Caliber Air Rifle perfectly sighted in so I did have to aim low and to the left which made it a bit harder dropping the plates but I did manage to get the job done at least for providing a decent test video fo the Rx Target Systems for the purposes of this video.
Make sure to not only watch my Field Test Shooting video included in this post but also checkout my Rx Target Systems Preview Video where I show it up and close and also go into more details on the Rx Target Systems and how modular and versatile it really is.
Type: Air Rifle / Machine Gun. Distributer: Umarex Model:Legends M1A1. Materials: Mostly Metal build. Weight: 7.75 pounds (3.5 kilograms) Barrel: 12 inches - smooth bore steel. Propulsion: 2x12 gram CO2. Action: Internal BoltBlowback single action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 30 round full size drop out magazine. Max FPS: 435.
Trigger Pull: The trigger pull on the Umarex Legends M1A1 Blowback CO2 BB Machine Gun is single action only so you will need to charge the bolt for the first shot just like you would on the real steel Thompson M1A1, after that the blowback operation will charge the bolt which allows for semi and full auto shooting. Trigger pull is not very long or heavy.
Build Quality: The Umarex Legends M1A1 Blowback CO2 BB Machine Gun is pretty much all metal other than the stock and pistol grip. Pretty much everything that is black is going to be metal on this CO2 airgun. It weighs in at a hefty 7.75 pounds which is lighter than the real steel version by about 2 pounds but keep in mind the simulated plastic wood grips are a much lighter than real wood would be. Overall the fit and finish is really good, mechanical parts work well and seem to be well machined..
Realism: The Umarex Legends M1A1 Blowback CO2 BB Machine Gun is a 1 to 1 replica of the real steel World War II Thompson M1A1 Machine Gun and is very authentic looking with similar operation. Even the magazine holds 30 rounds just like the real steel Thompson M1A1. The blowback operation will give you a little bit of that shoulder tap but of course nothing like a 45 caliber M1A1. As expected in todays Replica Airguns the barrel is recessed to give it a larger opening and the CO2 screw is hidden well enough. I would like to see at least a real wood kit for the Umarex Legends M1A1 Blowback CO2 BB Machine Gun which would not lonely look even better but also increase the overall weight closer to the 10 pound real steel weight.
Yet another Classic Legends Replica Airgun from Umarex, maybe one of the best to date.
Mostly all metal design with good overall weight.
Semi and Full auto select-ability.
Dual CO2 design for increased shots and less cool down effect.
High capacity 30 round full size drop out metal magazine.
Umarex went with less rounds to get away from the double stay configuration of the 50 round Legends MP40 which was not always dependable.
Great looking replica of the real steel M1A1 in looks, operation and feel.
Internal bolt blowback will give a bit of recoil feedback feel.
Simulated wood looks very realistic.
Recessed barrel for added realism.
Cons:
Real wood hardware would have been cine and added it of additional weight. Maybe Umarex will offer this down the road?
Price is getting up there a bit but still worth it if you are an M1A1 fan, imagine what a real one would cost?
Going to eat up CO2 quickly in full auto mode but you can always switch over to semi auto.
Comments: Another great Legends product from Umarex, maybe even the best one so far. The only issues I had with the Umarex Legends MP40 was the double stack magazine feeding dependability with the 50 round double stack magazine not always feeding consistently. Umarex went back to a less aggressive closer to a single stack magazine on the Umarex Legends M1A1 Blowback CO2 BB Machine Gun which has a fewer rods but is expected to feed more consistently. I am looking forward to getting out and actually shooting the Umarex Legends M1A1 Blowback CO2 BB Machine Gun when I make my Field Test Shooting video. My advice right now with uncertainties about if and when we will get new inventory is buy now if you are in a position to as I am not sure how long they will last and when we will be able to get more stock.
My Vimeo Table Top Review of the Umarex Legends M1A1 Blowback CO2 BB Machine Gun:
I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.
For now here are some of the key points I want to get out to everyone:
Mission: Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack. What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.
Modular
One base allows interchange of faceplates for different target configurations
One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles
Portable
Mount it on a shelf indoors
Mount it on a sawhorse outdoors
Carry it in a backpack or duffle bag- its 10 pounds
Rugged
Solid steel design
Faceplates from 10 gauge to ¼ inch thick
3-Dimensional
Faceplate is offset from paddles
Clipping the aperture does not guarantee a score
Intentions of target configurations
Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull)
1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper
AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.
WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures
10-15- Inspired by customer request, uses 10mm and 15mm apertures. High-Precision shooting.
Unfortunately the microphone system I was using for some reason did not record the Lapel Microphones we where record the audio with for this ASG SHOT Show 2020 Interview Video. The Camera we where recording video with did record audio but as there is so much back ground noise going on at large show like this, the audio is far from good. That all said try do you your best to listen to what we are discussing. There are sections where the audio is fairly distinguishable and sections in the video that are not due the proximity of the camera.
Bob from ASG and I go over serval products for ASG at SHOT Show 2020 this year. We first take a look at the new ASG Shadow 2 CO2 Blowback BB Pistol. One interesting fact about the new ASG Shadow 2 is that it has an internal Hop-up system that help BB’s travel further out for longer range shooting. The ASG Shadow 2 also has a fully adjustable rear sight making this Blowback CO2 BB Airgun a potentially pretty decent target pistol.
Another new product from ASG we focused on is the Airsoft ASG B&T Universal Service Weapon designed for first responder situations. The ASG B&T USW has an extended rear frame allowing for a non-recipricating red dot sight placement. The ASG B&T Universal Service Weapon has a built in folding stock and you can trick it out with all kinds of add ons to make it your own.
Near the end of the video we took a look at some new ICS Airsoft offerings from ASG.
