Kicking off my SHOT Show 2024 Interviews, I present my Umarex Interview with Mark Davis, you may remember Mark from past Umarex SHOT Show Interviews? This is a fairly long interview as Mark had a lot of product to show me including…

The new Marlin Lever Action BB Rifle, the Walther PDP CO2 BB Pistol, the BBX11 1911 Blowback CO2 BB Pistol, the MarkPoint Break Barrel .177 Caliber Pellet Pistol, the Trinity Hi-Cap 2011 Blowback Airsoft Pistol, the Gambler High Stakes Single Action Army CO2 Airsoft Revolver, the Glock 380 GBB Airsoft Pistol, the CQC Elite Force AEG Airsoft Rifle with i-Trace, and the Beretta PMX GBB Airsoft Rifle.

Yep, that’s a lot of products to go over in one Interview, and Mark did a great job! I am really looking forward to getting my hands on these new products from Umarex to review for everyone!

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

I’m back from SHOT Show 2024 and I always like to start off my series of SHOT Show Interview videos with a Teaser Video that not only shows off a few new guns but also gives everyone a vibe of what it feels like to visit Las Vegas and SHOT Show. I can only show you so much because as you know what happens in Vegas stays in Vegas…

I did get the chance to interview several Airgun Companies that I will be putting together Interview Videos for, including Umarex, ASG, KWA, Barra, EKOL and Byrna. Unfortunately Sig Sauer is no longer attending SHOT Show and Crosman had significantly reduced the focus of their booth and really did not have much in the way of Replica Airguns to show.

View fullsize

As Christmas and New year approach, I wanted to wish everyone a Merry Christmas and a Happy New Year. According to my religious beliefs I concelebrate Christmas and I do so unapologetically. I know we live in a multicultural world with a variety of religions and beliefs. If you do not celebrate Christmas as many of us do here in Canada, then I wish you a wonderful holiday season nonetheless.

I look forward to 2024 and hope the new year brings prosperity to those deserving of it. May the righteous prevail over the unrighteous and good over evil.

For those following me over on Replica Airguns, I will be going to SHOT Show this year after a three year hiatus. I am really looking forward to seeing all the venders and new products they are showcasing at SHOT Show 2024.

For my GetFitOver40 audience I am taking things day by day and as I feel better and better I hope to be able to do more and more and perhaps maybe even do a show this year, but more on my own terms and my own timeline

Score Unbelievable Savings on Your Favorite Items. Don't Wait, Shop Now!

• www.replicaairguns.ca

View fullsize

I don’t get to test out Bolt Action Airsoft Sniper type Rifles all that often but I do enjoy them for sure. I would like to test out the S&T Matrix KAR98K Bolt Action Airsoft Rifle using longer ranges than I can here in the Replica Airguns Indoor Sea Can Shooting Range but hopefully this Filed Test Review gives you an idea of what this Spring powered Bolt Action Airsoft Rifle can do. Make sure to watch my Table Top Review for the S&T Matrix KAR98K Bolt Action Airsoft Rifle for details, specifications and closer up video. In this video I mainly test out the velocity and accuracy at 30 feet away to see what the actual fps is and how tight of a 10 shot grouping I can get on a paper target.

Starting with the velocity test, I generally put 5 rounds through my Chronograph and then average them out for a real world rating. In this test I used standard .20 gram Airsoft BB’s for both the velocity and accuracy components of the video. I was very impressed with the consistency of the velocity with the slowest shot hitting 362 fps and the fastest shot hitting 363 fps averaging 362.5 fps and only having a 1 fps maximum difference between all shots. Pretty good right? Consistent velocity is very important for any sniper type rifle as if there is a large spread in velocity this can reduce elevation accuracy down range.

View fullsize

In terms of accuracy I was again very impressed with my results. For my target test I setup a fresh paper target 30 feet away and proceeded to shoot 10 rounds into it. I did have to reset for each shot as I had to manually work the bolt after each shot, this can affect accuracy but it did not seem to all that much. I was using a seated position in the back with my hands rested on a sand bag up front which does hep settle things down. Even with having to reset between each shot, I still managed to get close to a 1 inch 10 shot grouping, one shot did shoot just a bit high but that was probably me pulling it a bit. Out of the box with no sight adjustments the S&T Matrix KAR98K Bolt Action Airsoft Rifle shot almost dead center in the bullseye, it is fairly easy to adjust the elevation using the rear sight but there is no easy way to adjust for windage using the built in iron sights.

I know this is a Field Test Shooting Video and so it’s not really all about build or quality. That said I do love the quality and attention to detail the S&T Matrix KAR98K Bolt Action Airsoft Rifle has and the fact that it performs really well too is a big bonus. One last point I did not even mention in the Field Test Video is that Was able to load a lot more than 11 rounds into the magazine. I stoped at 19 as the spring was getting on the tight side, but may have been able to load more? If you’re looking for a sniper rifle with a history and that will stand out in a game then take a look at the S&T Matrix KAR98K Bolt Action Airsoft Rifle as an option.

• Buy the S&T Matrix KAR98K Bolt Action Airsoft Rifle in Canada

• Buy Bolt Action Airsoft Rifles in the US

View fullsize

Type: Pellet Rifle.
Manufacturer: Beeman
Model: Black Panther Dual Caliber.
Materials: Metal and Synthetic Plastic.
Weight: 7.2pounds (2.3kg).
Total Length: 44 inches (111.8cm).
Barrel: 16.75 inches (42.5cm).
Propulsion: Spring Piston.
Action: Single Action Single Shot.
Ammunition Type: .177 & .22 Caliber Pellets.
Ammunition Capacity: 1.
Max FPS: 495 Claimed.

View fullsize

Trigger Pull: The trigger on the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. This will also engage the safety which you have to disengage for each shot manually as an added security measure. The actual trigger pull is I would say a medium pull with an easy first stage then a more firm second stage. I am pretty sure the Black Panther uses the Sportsman tigger setup which does have some adjustment for trigger pull as far as I am aware of. Once I get a chance to shoot the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle I will be able to tell you more about how the trigger feels.

View fullsize

Accuracy: I have not performed any shooting tests with the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle so far, I will be making a Video Review next in the next few weeks “weather permitting” as I want to get outdoors for this test to be able to shoot the Black Panther at longer ranges. I expect the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle to perform well in the accuracy department using the 4x32 optical scope. In terms of power the spring does seem to take a bit of effort so I am hoping for a decent fps in both .177 caliber and .22 caliber!

View fullsize

Build Quality: The Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle is made in China but looks to be fairly well made. It is mostly metal including the front and rear sights with a synthetic plastic stock and feels good to hold resting the cushioned rubber butt-pad to your shoulder. The stock and trigger guard are a one piece design, that said the trigger guard is fairly thick so it should stand up to some abuse.

View fullsize

Realism: The Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle is not a copy of any real steel gun in production but does have that overall rifle shape to it so it looks like a gun but most people will be able to immediately see that it is a Pellet Rifle and that is exactly what it is since it is not trying to be a Replica Airgun or copy of any real steel rifle in production.

View fullsize

Pros:

• All Weather durable ambidextrous synthetic stock.

• All metal front and rear fiver optic sights.

• Can shoot both .177 and .22 caliber pellets for multi purpose shooting.

• Sportsman trigger (adjustable) with automatic safety system.

• Comes with included 4x32 scope and mounts.

• Very solid build at 9.92 pounds.

• Nice cushioned rubber butt-plate looks good and adds to shooting comfort.

• Has a scope-stop so your scope will stay nicely in place.

Cons:

• Hard to tell if the claimed 495 fps is for .177 or .22 caliber lead or alloy pellets?

• Hard to find this exact gun for info, not even on Beeman’s own website.

• Made in China.

View fullsize

Comments:
The Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle is designed to be a more affordable Break Barrel Spring Piston Pellet Rifle with metal where it counts and a synthetic stock for durability and resiliency to weather conditions. You do have the option of shooting either .177 caliber pellets for a faster flatter trajectory or if you use the .22 caliber barrel, you benefit from perhaps a bit more downrange energy and less effect from windy conditions. You can also choose between shooting with the open fully adjustable metal sights or install the 4x32 scope for longer range shooting. You for sure get a versatile Spring Piston Air Rifle with the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle at the end of the day.

• Buy the Beeman Black Panther Break Barrel Pellet Rifle in Canada

• Buy Beeman Break Barrel Pellet Rifles in the US

View fullsize

Type: Airsoft Rifle.
Manufacturer: S&T
Model: KAR98K
Materials: Metal & Wood.
Weight: 3300 grams (7.28 pounds).
Total Length: 1120mm (44.1 inches).
Barrel: 483mm (19 inches) Smooth bore.
Power Source: Spring Piston.
Action: Bolt Action - Single Action Only.
Ammo Type: 6mm Airsoft BB.
Ammo Capacity: 11 Round Magazine.
FPS: 380-420.

View fullsize

Trivia: The Karabiner 98 kurz (German: "carbine 98 short", often abbreviated Kar98k or K98k and often incorrectly referred to as a K98 (which was a Polish Carbine) is a bolt-action rifle chambered for the 7.9257mm Mauser cartridge that was adopted on 21 June 1935 as the standard service rifle by the German Wehrmacht. It was one of the final developments in the long line of Mauser military rifles. Although supplemented by semi- and fully automatic rifles during World War II, it remained the primary German service rifle until the end of the war in 1945. Millions were captured by the Soviets at the conclusion of World War II and were widely distributed as military aid. The Karabiner 98k, therefore, continues to appear in conflicts across the world as they are taken out of storage during times of strife.

View fullsize

Trigger Pull: The trigger pull on S&T Matrix KAR98K Bolt Action Airsoft Rifle is a single action only trigger as the bolt action not only compresses the spring but also readies the trigger for release making the trigger pull short and light. There is a short amount of takeup with a crisp and light release.

Accuracy: I have not shot the S&T Matrix KAR98K Bolt Action Airsoft Rifle so far but plan to make a full dedicated Field Test Shooting Video shortly to find out what the actual real world velocity and accuracy will be. So stay posted for my upcoming shooting test in a few weeks time…

View fullsize

Build Quality: The build quality for the S&T Matrix KAR98K Bolt Action Airsoft Rifle is really good as it is made almost exclusively of either metal or wood. The stock is finished in a dark walnut stain and the metal has a rustic finish about it which is what you would find in a real steel aged version. You will also find a CNC Aluminum body along with a Reinforced metal barrel, bolt assembly and internals. The S&T KAR98K has a quality feel about it inside and out.

View fullsize

Realism: As mentioned earlier the finishes has a less refined look adding to the realism, that combined with the real wood stock really makes this Bolt Action Airsoft Rifle supper believable as a Replica Airgun. The only real giveaway is when you pull the bolt back and it is a solid unit with no visibility in to the magazine area. Other than that the S&T Matrix KAR98K Bolt Action Airsoft Rifle is a solid copy of the real steel version.

View fullsize

Pros:

• Super believable replica of the real Kar98k.

• Very solid build quality weighing over 7 pounds.

• Realistic materials including the real wood stock.

• CNC Aluminum body.

• Reinforced metal barrel, bolt assembly and internals.

• No need for a battery or to use CO2 or gas.

• Adjustable rear sight on the fly for elevation.

• Bolt action feels smooth.

• Easy to adjust Hop-up.

View fullsize

Cons:

• Does come with a red tip (should be able to remove).

• Rear sight not adjustable for windage.

• No sling included, would have been nice.

• Bolt does not allow to see into magazine area.

View fullsize

Comments:

The S&T Matrix KAR98K Bolt Action Airsoft Rifle looks and feels the part for sure and has a lot of quality going on with it’s real wood stock and quality metal throughout. I love the finish of not only the wood stock but also the metal parts as they have a less refined and aged quality about them that would be similar as to how a real World War 2 rifle would look today. If you want an ultra realist bolt action World War 2 Carbine that you can shoot almost anywhere, then look no further. OK the sticker price on this one is a bit higher than some, but again so is the quality so if that's important to you be prepared to pay a bit more.

• Buy the S&T Matrix KAR98K Bolt Action Airsoft Rifle in Canada

• Buy Bolt Action Airsoft Rifles in the US

In this Replica Airguns Unboxing Video I take a look at 6 Airguns consisting of 2 Paintball Pistols, 3 Airsoft Rifles and one Pellet Rifle. This is not a full review in any way but is rather a preview of what i will be doing full Reviews for over the next several weeks.

View fullsize

Umarex T4E HK VP9 .43 Cal Paintball Pistol:

• Manufacturer: T4E Umarex

• Type: .43 Cal. Paintball Pistol

• Action: CO2 Blowback DOA

• FPS: 300+

• Ammunition Capacity: 8 Rounds

View fullsize

Umarex T4E TR68 .68 Cal Paintball Revolver:

• Manufacturer: T4E Umarex

• Type: .68 Cal. Paintball Revolver

• Action: CO2 Revolver DOA

• FPS: 300+

• Ammunition Capacity: 5 Rounds

View fullsize

Specna Arms Core SA-CO2 AEG Airsoft Rifle:

• Manufacturer: Spec Arms

• Type: .6mm Airsoft BB

• Action: AEG Semi/Full Auto SAO

• FPS: 410

• Ammunition Capacity: 450 Rounds

View fullsize

Bear River Black Ops SR4 AEG Airsoft Rifle:

• Manufacturer: Bear River

• Type: .6mm Airsoft BB

• Action: AEG Semi/Full Auto SAO

• FPS:400

• Ammunition Capacity: 300 Rounds

View fullsize

S&T Armament KAR 98K Spring Airsoft Rifle:

• Manufacturer: S&T Armament

• Type: .6mm Airsoft BB

• Action: Bolt Spring Action SAO

• FPS:400

• Ammunition Capacity: 11 Rounds

View fullsize

Beeman Black Panther Break Barrel Pellet Rifle:

• Manufacturer: Beeman

• Type: .177 & .22 Cal. Pellets

• Action: Break Barrel Spring Piston SAO

• FPS:495

• Ammunition Capacity: 1 Round

View fullsize

When it comes to video and audio components that I use for making my videos, I am always looking for something that can improve the creativity or quality of my videos and audio in the videos so I keep an eye out for any new tech that I think is ingesting.

I tried using a drone in the past but found them too time consuming to setup and the drone noise always got into the sound of the video which can be a problem when you need live audio.

View fullsize

And then along comes the Hover Camera X1, it’s not really what you would expect exactly from a drone or camera. As a drone you would expect a remote along with GPS and the ability to go super high and far away and fly really fast. Well the Hover Camera X1 doesn’t do any of that.

As a camera you would expect something you can put on a tripod or at the end of a selfie stick and that is for the most part a more static object. Again the Hover Camera X1 is not really any of this.

What the Hover Camera X1 is is a new type of tech that allows you to have many of the benefits of what a camera man can do along with some of the cool tracking shots that a drone can do. And all in a device that fits easily in your pocket and weighs less than a smartphone.

View fullsize

In this Video I go into what the Hover Camera X1 can and can not do and where it really excels as compared to what a typical camera and typical drone is capable of. Yes there are some similarities but there are for sure something newish a conventional camera or drone can match.

Watch my video review with my take on the Hover Camera X1 with samples videos showing off the capabilities this very versatile video and photo tool can perform.

View fullsize

Final Countdown! Shop now our BC Day weekend sale, ending within 24 hours!

• Save 5% Sitewide - FREE SHIPPING ON ORDERS OVER 275$

  SHOP NOW

Save 5% Site Wide in the Replica Airguns Canada Store!

5% Off Sitewide for Father’s Day at www.ReplicaAirguns.ca

I am personally very interested in what the origins of a company are, at least companies that I am interested in. Where did the idea for the company come from,? How did the company first start up? What steps did they take to get to where they are now? Where there any road black along the way?

I don’t believe I have every talked about how Replica Airguns came to be in any of my videos, where and when it all started, so why not talk about it now…

And I don’t have any Airguns to review at the moment so I need to make a video of some sort…

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

Cost:

Airguns are generally cheaper to buy and for sure cheaper to shoot. Airguns can cost as little as $50-100 to buy while real guns in similar models will cost many time more. Cost of ammo is so much less expensive than Real Gun ammo by a mile!

View fullsize

Difficulty to Obtain:

Airguns in most countries do not require any licensing or registration. Generally there are more available options in Airgun choices than Real Gun choices as restrictions often prohibit many Real Guns to be obtained.

View fullsize

Places to Shoot:

Unless you live in a super remote locations and your laws allow you to shoot Real Guns in those locations, then in most cases you can shoot an Airgun almost anywhere within reason. You can even shoot certain Airgun models in your basement. Airsoft is a great option for indoor shooting as the plastic ammo does not carry very much energy so with minimal effort you can make a backstop that will trap the ammo very well.

View fullsize

Trigger Time:

Because ammo is much less expensive and places you can shoot are easier to find, you can get a lot more Trigger Time under your belt which will also improve your shotgun with Real Guns and after all it’s just fun to shoot guns even if they are Airguns.

View fullsize

Safety:

I am not talking about safety in terms of protection. I am talking about safety as in if you do something stupid and your Gun goes off accidentally. If you accidentally fire your Airgun indoors, the bullet will not travel through floors or walls and potentially harm or kill someone on the other side. If you do manage to shoot yourself with an Airgun, the consequence are much less severe than shooting yourself with a Real Gun. That said, always treat an Airgun as if it was a Real Loaded Gun, as server injury and even death can occur even with an Airgun.

View fullsize

Ware Games and Training Situations:

There is no way you can use a standard Real Gun to shoot at people, unless extensively altered with special parts that make the Real Gun unusable to shoot live ammo. With Airguns you have the choice of using an Airsoft or Paintball gun that are both designed specifically for this purpose.

View fullsize

Pest Control:

If you have the need for pest control in an urban area where you do not want a stray bullet to travel too far or penetrate buildings if a shot where to go awry, then an Airgun designed for accuracy and power may be perfect for the job. Accuracy with target and hunting Airguns is on par if not better than many Real Guns and are have powerful enough to kill a pest humanely without having too much power for the job and having to worry as much about your background.

View fullsize

Prop Guns:

As mentioned already, Airguns can look a lot like Real Guns, so they are perfect to be used as a stand-in or Prop Gun when you need to simulate the look and function of a Real Gun. Again they are easier and cheaper to obtain and if something does go wrong, the consequences are much less severe.

View fullsize

Social Stigma:

Unfortunately Real Guns and perhaps any gun these days are looked upon with a social stigma as being the cause of the Crime rather than a tool used in a Crime. And so people blame Guns for these crimes rather than the people committing these crimes. If a person is motivated enough to do something bad, they are going to do it either way and will use whatever means is available to them to commit these Crimes. Including other means like: Knives, Blunt Objects, Poisons, Vehicles, Explosives… Sad but true! Airguns are not used in homicides or mass shootings as they are completely underpowered for a crime like this. They can however be used in crimes as a show of threat, as they do look a lot like real guns, generally people that use Airguns for real crimes, if challenged will give up immediately as they are completely outgunned. Don’t bring an Airgun to a Real Gun fight, you have better chance with a knife!

This video is primarily for my viewers over on the Replica Airguns channels as I have not posted anything about what's been going on with me the last month and a bit. My Airgun channel does not have very much personal content like my GetFitOver40 channel does, so I wanted to fill them in on where I have been and what's been going on.

In this video I talk about being in the hospital for a month because I was experiencing shortness of breath and a feeling of pressure in my diaphragm area which was later found out to be a heart problem.

Unknown to me I had been born with a Congenital Heart Defect where my Aortic Valve was defective which over time had cause the Aortic Root area to double in size (3cm normal to 6cm).

This defect caused my heart to work a lot harder then normal making it enlarge over time which is not good and reduces it's pumping ability. Before my operation my heart function was below 20%, a normal healthy heart is around 60%.

While in the hospital I had open heart surgery on my Aortic valve replacing it along with a section above it. I also had a Pacemaker/Defibrillator put in. There where a lot of concerns because my heart was also enlarged and not functioning that well, the doctor even said they may not be able to get me off of bypass which would then require an emergency heart transplant. The good news is the operation went well and no need for a new heart at least for now...

I was in the hospital for longer than normal because of my enlarged heart and because of all the stress to it. I was in and out of what's called Atrial Fibrillation. This is when the heart beats very irregularly and faster than normal. It can be short term or longer term and can sort itself out or require intervention to help get back to a Sinus Rhythm. At the time of this post I believe it has gone back to the normal Sinus Rhythm, so fingers crossed it stays this way.

As you can imagine, this has been a life changing event and means my lifestyle will be changing a bit. I will not be doing anything to overstress my heart but that does not mean no more fitness for me, just a different fitness approach. Perhaps a more scaled back approach but I am always up for a challenge and this is no different in terms of how I would approach any challenge in my life.

So if you are a Replica Airguns follower and want to follow my "Road to Recovery" you can do that over on my GetFitOver40 channels. Other than that I will be making regular Airgun Videos moving forward now that I am at home.

Save big this long weekend with our Early Black Friday Sale! Grab some new guns, and tactical gear all for cheap. Everything here has prices slashed up to 50% off.

View fullsize

Type: Pellet Pistol.
Distributer: Umarex.
Model: Stainless Ruger Mark IV.
Materials: Metal and polymer build.
Weight: 1.56 pounds (708 grams).
Barrel: 5.3 inches (135mm).
Total Length: 11 inches (279mm).
Propulsion: Spring Piston.
Action: SAO Break Barrel.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 1 round.
FPS: 320.

View fullsize

Trigger Pull: The trigger pull on the Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.

View fullsize

Accuracy: I have tested out the all black version of this pistol which will perform exactly the same or should I say is expected to perform the same since they are virtually the exact same Pellet Pistol but in different finishes. You can watch my Field Test Shooting Video for the all black version but in case you don’t make it there I will fill you in on the basic results… In terms of velocity I averaged 312 fps using 7 grain lead pellets and got around a 2 inch 7 rounds grouping but expect with a bit more trigger time to get closer to 1 inch.

View fullsize

Build Quality: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?

View fullsize

Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.

View fullsize

Pros:

• It's a decent Ruger Mark IV Replica!

• Feels well built overall.

• Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.

• Barrel locks into place much better than the Umarex Browning Buck Mark URX did.

• Fully adjustable rear sight with fiber optic front sight.

• Auto locking safety, just don’t forget to unlock before each shot

• Actual metal trigger in this version.

• Nice and compact, not too heavy.

• Full Ruger licensed via Umarex.

• Fairly low price tag.

View fullsize

Cons:

• No built in rail for a sight system like the Umarex Browning Buck Mark URX.

• Would have liked a metal trigger and maybe a slightly lighter trigger pull to match the real Buck Mark's very light trigger pull.

• A bit more metal would have been nice.

• Significantly more expensive than the black version which is the same exact gun in a different color.

View fullsize

Comments:
The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a decent looking replica and a decent pellet shooting target pistol and if you own the real steel version in 22LR you may just want to get your hands on one of these Break Barrel Replica Pellet shooters. The only real question is do you get the Stainless version with simulated wood grips or the all black version? If you like the look of the stainless version and don’t care about money whatsoever, then pickup that one up since it is a Limited Edition version that will only go up in value over time. If you are on a budget and don’t mind the look of the all black versions or maybe even prefer it then by all means grab one since at the end of the day they will both perform exactly the same.

My Vimeo Table Top Review Videos for the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol:

• Buy the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol in Canada

• Buy the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol in the US

This time I have a tiny Mystery Box to unpack and show you guys, this time there are only two pistols, one is a Spring Piston Single Shot .177 Caliber Pellet Pistol and the other is a 6mm Airsoft Blowback BB Pistol, both are Licensed Replicas for Umarex. If you want to find out more about each Air Pistol then make sure to watch this Mystery Box Unboxing Preview Video!

This will be my only video this week as I am in what is called Peak Week in preparation for the Vancouver Fall Calssic Fitness show I am competing in this upcoming weekend. Peak Week really takes a lot out of me and is rather time consuming with the physical activity I am doing and daily blog styled videos I am posting for my other channel www.GetFitOver40.com.

If you are interested in what I do fitness wise then checkout that channel and follow me along this week as I hope to kick some but competing against dudes half my age.

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

In this Field test Shooting Video I Test out the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in the Replica Airguns Indoor Airgun Shooting Range to find out what kind of velocity we can achieve using standard lead pellets. I also shoot 6 rods on a paper target setup 30 feet down range to see what kind of grouping I can get with this single shot spring piston Airgun. If you are looking for more details and specification along wit some closer up video then make sure to watch my Table Top Review Video for the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun.

Starting with my velocity test, I shot 3 rounds through my Chronograph using .177 caliber 7 grain lead pellets achieving 482, 489 and 466 fps with an average of 479 for the three shots. Not bad for a fairly compact Break Barrel Airgun. This is perhaps fast enough for small game like mice and small rats but you would need to get proficient on your shot accuracy to make sure you got a good head or lung shot to make it a more humane pest control.

View fullsize

For the accuracy portion of this Field test Shooting Review I proceeded to fire 6 rounds into a paper target setup 30 feet away. I use a semi rested shooting position with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun resting on a sand bag up front and me sitting on a stool for stability. My 6 shot grouping was all within around 1.5 inches but I feel like this Pellet gun can do better with me getting a bit more use ot it, still not bad out of the box and with my first round shooting it.

I really like the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun as not only a Replica but it also shoed itself ot be a decent target Airgun at the end of the day. I do have to say the trigger is a bit long but not heavy at all, it has a smooth pull with a soft release. Most pimple should be able towel with this just fine. SO if you are looking for a Replica but also want an Airgun that can shoot hard and with decent accuracy then look no further than the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun.

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in Canada

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in the US

View fullsize

Type: Pellet Rifle.
Manufacturer: Umarex
Model: HK MP7 .177.
Materials: Metal and Polymer.
Weight: 4.4 pounds (2kg).
Barrel: 11.7 inches (29.7cm).
Total Length: 31 inches (78.7cm).
Propulsion: Break Barrel Spring Piston.
Action: Single Action Single Shot.
Ammunition Type: .177 Caliber Pellets.
Ammunition Capacity: 1.
Max FPS: 490 Claimed.

View fullsize

Trigger Pull: The trigger on the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. The actual trigger pull is pretty decent overall. There is very little take-up but the creep is on the longer side but fairly smooth requiring medium pressure. The release is a bit hard at first to predict but nothing some trigger time can’t get you use to.

View fullsize

Accuracy: I have not performed any shooting tests with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun so far. I hope to make that Video Review next week. I expect the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun to perform well in the accuracy department especially with the included Red Dot Optical Scope installed. I hope the velocity rating from Umarex is based on lead pellets and not hyper velocity light weight pellets but we will find out the story when I perform my Field Test Shooting Video shortly!

View fullsize

Build Quality: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is a China made Airgun but looks to be well made. It has lots of metal parts as you would expect from a Spring Piston Rifle which adds a nice weight and feel to it. I did however have an issue with the front plastic mock Suppressor/Compensator as it does not seem to be attached to the metal barrel very well other than being pressure fit which is not going to cut it with all the vibration a spring piston system makes. My first shot loosened the mock Suppressor/Compensator so I will either have to hold it when shooting or find another way to make sure it stays in place.

View fullsize

Realism: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is kind of unique in this department as most break barrel rifles are not Replicas, especially the more compact sub machine gun styled ones. Umarex did good job making the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun look like a real HK MP7 for the most part. Of course it is a Spring Piston Rifle at its core so exceptions had to be made to make this work including molded non working parts like the magazine release, sector switch and, bolt/ejection port. That said all in all it is a decent looking replica considering it is a Break Barrel Airgun under the skin.

View fullsize

Pros:

• Not many Replica Pellet Rifles on the market, especially in a more compact gun.

• Comes with Red Dot sight.

• Lots of rails for adding accessories to it.

• Full HK Licensed by Umarex.

• Collapsible Wire Stock.

• Nice high claimed 490 fps.

• No need for CO2 so low cost to cooperate.

• Not effected by temperature like a CO2 Airgun.

• Should have better accuracy than most BB Replica Airguns.

• Very solid feel to it, good overall weight and feel.

View fullsize

Cons:

• Not going to be an action shooter, have to reload after each shot.

• A good overall Replica but not as Realistic or full operation as a BB version would be.

• Mock Suppressor/Compensator poorly attached to barrel.

View fullsize

Comments:
The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is an interesting product, on one hadn't it is a Replica Airgun and most people expect a Replica Airgun to have all of the appropriate working parts similar to what would be found on the real steel version. But since this is a Break Barrel Airgun at the core the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun will not function the same as the Real Steel version so as long as you don’t expect it to and appreciate the fact that it should be a nice accurate low cost to operate target rifle then I think you will understand this product and enjoy it for what it is… A Single Shot Pellet Rifle that looks a lot like a HK MP7.

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in Canada

• Buy the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun in the US