Entries in Replica Airguns News,Rifle

ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun Table Top Review

No Comments

Type: Airsoft Rifle.
Distributer: ASG.
Model: Action Army T-11.
Materials: Metal and polymer build.
Weight: 3.9/4.5 pounds.
Barrel: 11.8 inches, non-rifled.
Total Length: 34.7/43.3 inches
Propulsion: Spring
Action: Bolt action repeater.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 50 round magazine.
FPS: 400-430.
Type: Pistol and Rifle versions.

Trigger Pull: The trigger pull on ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is light, short and crisp. There is virtually no take-up and the release point has no creep to it. I would say it is not too light but for sure one of the lighter trigger s I have tested on a Airsoft rifle.

Accuracy: I have not performed my Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun so stay posted for that. ASG claims around 400-430 fps velocity depending on the version which is kind of weird since both have the exact same barrel length internally and I would assume both use the same mechanical part throughout? I don’t have the rifle version to compare to but I will for sure test the velocity using my Chronograph for the pistol version when I do my Field Test Shooting Review along with accuracy performance.

Build Quality: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is well built for sure, it feels really solid in the hadn't and has good overall weigth to it for it’s size. You will find lots of metal parts where they need to be as in the inner and outer barrel, receiver, bolt, trigger, magazine release and I am sure most mechanical internal parts. Fit and finish is also very good.

Realism: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is not a replace of any gun I know of but does have tab least the pistol version does look like a sawn off shotgun more than a sniper rifle. The gun overall all is very modern and ergonomic looking but in terms of being a replica of any specific real steel gun in production I don’t know of any it would resemble?

Pros:

  • Top and bottom rails for lots of accessory add on options.

  • Can swap over to a rifle version by adding on an interchangeable but-stock.

  • Mock magazine allows for storage and transport of tools plus extras.

  • Safety switch is in a great location for right handed shooters.

  • Comes with included hand stop.

  • Solid construction with lots of metal parts where they are important.

  • Ability to add side rails.

  • Great option if you are looking for a more compact sniper rifle.

  • Comes in Pistol and Rifle versions.

Cons:

  • Has an orange tip.

  • Does not come with sights, will need to add some sort of optical or red dot sight.

  • Does not come with speed loader, would have been nice.

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun. I won’t be able to test it out perhaps as far range as I would like to since I will be shooting it in the Replica Airguns Indoor Shooting range which allows me to test at 30 feet. That should give us a good overall idea on at least what it may be capable of since if we can get a tight group at 30 feet we should also be able to get a tight group at longer ranges with proper hop-up and BB selection. I like the option of being able to choose either the Pistol or Rifle version and both should perform about the same. Having the Pistol version will allow for a much more compact Sniper Rifle option much better suited for shooting in a variety of situations.

My Vimeo Videos for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun:

Categories: 6mm, Airsoft, Pistol, Repeater, Review, Rifle, Spring Piston, Vimeo Video Tags: ASG, Action Army T-11, T-

Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle Field Test Review

1 Comment

Make sure to watch my Table Top Video Review where I go into more detail about the specifications and details along with some nice close up video of the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle.

In this Vimeo Video Field Test Review I test out the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the indoor Replica Airguns Shooting Range to see how accurate it is and what kind fo velocity we can expect from it.

Starting with the velocity test I averaged out 8 rounds through my chronograph using 8.18 grain lead pellets using the dual 12 gram CO2 setup and I was able to average 445 fps which is not bad as these are mid grain weight pellets, lighter weight pellets would for sure get closer to the 490 fps claimed by Umarex. The temperate was about average room temp so not overly cold or warm.

Moving on to the accuracy test I placed all 9 rounds from the rotary magazine into a fresh paper target setup 30 feet away. I use a reseted seated position in the back with the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle resting on a sand bag up front and I was using the 4 power scope for this test which I setup earlier. My final result was for sure an under one half inch grouping, I did feel like I pulled one shot a little bit but I am sure this Airgun can get quarter inch groupings at 30 feet and I would expect half inch groupings at 50 feet so perfect for mid range small pest shooting.

Umarex does adversities this Air rifle as being very quiet but in Canada we are not allowed to have any type of suppressor even on airguns so I believe this Canada version has been disabled in that regard but the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is fairly quiet for sure with its long barrel and slightly lower fps than the US version. Overall the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is a lot of bang for the buck with the added 4x scope, included magazines that hold 9 rounds each and the ability to use either a dual 12 gram or single 88 gram CO2 setup. It also looks really cool and performs just as good!

Categories: 4.5mm / .177 cal, CO2, Field Test, Pellet, Repeater, Review, Rifle, Scope, Vimeo Video Tags: Umarex, Fusion 2

Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle Table Top Review

1 Comment

Type: Pellet Rifle.
Distributer: Umarex.
Model: Fusion 2.
Materials: Metal and polymer build.
Weight: 6.5pounds (2948 grams).
Barrel: 22.5 inches, rifled.
Total Length: 40.3 inches
Propulsion: 12 gram CO2 x2 or 88 gram CO2 x1
Action: Bolt action repeater.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 9 round rotary magazine x2.
FPS: 490.

Trigger Pull: The trigger pull on Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle feels pretty good, it is fairly short and light having a claimed 3.5 pound release which is believable. You will need to obviously work the bolt for each shot that precooks the internal hammer/striker allowing for the short and light trigger.

Accuracy: I have not performed my Field Test Shooting Video for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle so stay posted for that. Umarex has claimed a velocity of around 490 FPS for the Canada version I will be testing, the US version has a claimed velocity of up to 700 for those in the US purchasing this Rifle. I am sure the included 4x32 optical scope once setup will help in the accuracy department when I test this CO2 Air Rifle out on a paper target setup 30 feet down range.

Build Quality: The Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is a fairly low cost target pellet Rifle when you consider it comes with a decent optical scope along with two 9 round magazines but even so the build quality seems very solid coming in at 6.5 pounds. The stock is plastic of course but there is lots of metal where you want it to be as in the bolt, trigger, safety and most other mechanical parts.

Realism: The Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is not a replace of any gun I know of but does sport a very modern ergonomic look with its pistol grip and molded full stock. I like the built in picatinny rail which even though it does not offer any type of open sight configuration will allow for a variety of scope mounting options for near or far shooting.

Pros:

  • Low cost for a full featured Air Rifle with included scope.

  • Nice ergonomic modern looking design.

  • Ability to use either 12 gram or 88 gram CO2 cartridges.

  • Comes with 4x32 optical scope and all mounting hardware needed.

  • Come with two 9 round rotary magazines.

  • May be very quiet if the SilencAir technology is not disabled here in Canada?

  • Single action 3.5 pound trigger fells good.

  • Safety is large and easy to use.

  • M-LOK slots for mounting additional hardware.

Cons:

  • No iron sight option if you would prefer that.

  • Limited to under 500 fps (Canada version).

  • Not sure about the functionality of the SilencAir technology in Canada?

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle to see if it performs as good as it looks. I’ll probably use the duel 12 gram configuration for this test since I don’t plan on shooting 300 rounds with it for my testing. We should also find out if the SilencAir technology has been disabled or not with my Canada version but even so, a 500 fps Air Refile is not going to be all that loud either way at the end of the day. There are not a lot of Bolt Action multi shot pellet Air Rifles out there especially in this price range so I am really hoping it hits a home run when I test it so stay posted for that video…

My Vimeo Videos for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle:

Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in Canada

Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the US

Categories: 4.5mm / .177 cal, CO2, Pellet, Repeater, Review, Rifle, Scope, Vimeo Video Tags: Umarex, Fusion 2

ASG T-11 Sniper - Steyr Scout - Umarex Fusion 2 Preview Unboxing Video

No Comments

In this Preview Unboxing Video I do an Unboxing and take a quick look at three Bolt Action Rifles, two spring powered Airsoft Rifles from ASG and a dual CO2 powered Pellet Rifle from Umarex.

ASG Action Army T-11 Spring Powered Bolt Action Airsoft Rifle

  • 6mm Airsoft BB’s

  • Length: 880mm/34,65inch

  • Barrel Length: 300mm/11.8inch

  • Mag. Capacity: 50 Rounds

  • Bolt Action Spring Powered

  • Hop up type: Adjustable

  • Velocity: 122ms/400fps

  • Weight: 1750gr/3.86lb

  • Comes in two versions, long and short.

ASG Steyr Scout Spring Powered Bolt Action Airsoft Rifle

  • 6mm Airsoft BB’s

  • Length: 410/620mm

  • Built in Bipod

  • Mag. Capacity: 50 Rounds

  • Bolt Action Spring Powered

  • Hop up type: Click Adjustable

  • Velocity: 375fps

  • Weight: 2125gr/4.7lb

  • Comes in two color version, black or two tone black and grey.

Umarex Fusion 2 Dual CO2 Powered .177 Caliber Pellet Rifle

  • .177 Caliber Pellets

  • Length: 1016mm/40inch

  • Barrel Length: 580mm/22.8inch

  • Mag. Capacity:9 Rounds

  • Bolt Action CO2 Powered

  • 4 x 32 Scope and 2 Magazines Included

  • Velocity: 490fps

  • Weight: 1580gr/3.5lb

  • Can use either 12 or 88 gram CO2

Categories: 4.5mm / .177 cal, 6mm, Airsoft, CO2, Pellet, Review, Rifle, Scope, Vimeo Video Tags: ASG, Umarex, T-11 Sniper, Steyr Scout, Fusion 2

Termination of the Replica Airguns YouTube Channel

12 Comments

In this our first dedicated video made to be uploaded to our New Replace Airguns Vimeo page, I talk about what exactly happened to us over on YouTube at least forma eh very little info we have what I feel happened which is still very confusing and we are still trying o make sense of it all…

I cover the initial email we received from YouTube on July 22nd at 12:18 am that our Replica Airguns YouTube channel of some 15 years with over 1000 Videos uploaded, some 350+ thousand subscribers and around a half billion videos views had been been terminated just like that! Apparently there was a Countrified Claim made, whom that was from and what product/s are in question is still a huge mystery to us.

I also read off our appeal that we presented to YouTube / Google LLC but that appeal in turn was denied quickly, probably an automated generic response, not even sure if a real person even looked at to be honest.

I slo mention an email we received for YouTube a little bit before all of this happened basically stating that gun videos will start to get strikes on them as YouTube has detrained any type of gun related video is against their policies so it will not be long until all gun related YouTube channels are gone, be warned. YouTube is pushing hard the leftist agenda on their platform so if you view yourself as a more right wing individual you may have to satin looking to other platform to get your Video information from…

Categories: Airgun News, Airsoft News, Blank Gun News, Replica Airguns News Tags:

YouTube Channel Termination Appeal

5 Comments

YouTube Termination.jpg

I made an Appeal to YouTube several days ago regarding their “Counterfeit Complaint” and subsequent termination of our Replica Airguns YouTube Channel but have not yet heard back from them yet?

If anyone out there has any sort of connection or influence with the powers that be within YouTube, I ask that you reach out to them on our behalf. Our Replica Airguns Channel and future presence within the Airgun community is hanging on a thread as we had so much of our business invested with YouTube.

Below is a copy of the Channel Termination Appeal I sent to YouTube, it would have been longer but it needed to stay within 1000 characters as per their limitations:

“I was notified July 22nd that because of a Counterfeit Complaint our YouTube channel of some 15 years with 350,000 subscribers, a half a billion videos views and 1000+ videos published had been terminated.

On the charge of a Counterfeit Complaint. We have never had such a claim made to our channel as we do not sell or promote counterfeit products on our YouTube channel, online store, or website.

www.replicaairguns.ca

www.replicaairguns.us

We only sell licensed products that we buy directly from companies that own licenses to sell such products. For example: Umarex, Crosman, Daisy, ASG, Sig Sauer, Gletcher, Air Venturi, Cybergun… to name a few.

If we are in violation of a Counterfeit Claim then all the above mentioned companies should also be in violation and have their YouTube channels terminated? Along with every other YouTube channel that reviews/sells any Airgun/Airsoft gun that resembles a real gun and that also sells such products from the above mentioned licensed companies.”

Categories: Airgun News, Airsoft News, Blank Gun News, Replica Airguns News, Gun Law Tags:

ASG TAC-6 CO2 Airsoft Rifle Field Test Review

No Comments

Today I decided to get outside since the weather was nice and make my Field Test Shooting Video for the ASG TAC-6 CO2 Airsoft Rifle (actually outside in the filed!) After all the ASG TAC-6 CO2 Airsoft Rifle is a sniper rifle and so I wanted to test it out at longer ranges than my 30 foot indoor shooting range can allow for. So I setup two paper targets at around 40 feet and 80 feet out, the actually distance may have been longer than that?

Starting off my Field Test Review I placed five .25 gram plastic Airsoft BB’s through my Chronograph and averaged 446 fps which is 6 fps faster than the claimed 440 fps from ASG. And that was with .25 gram Airsoft BB’s so if I was using lighter .20 gram BB’s I would expect velocity closer to around 500fps so don’t be shooting anyone with this Airsoft Rifle at close ranges!

Next I proceeded with my accuracy test placing 5 rounds on the target setup around 40 feet downrange. I managed to get all 5 rounds within about 2 inches of each other, not bad since this is a good 10 feet more than I usually test my Airsoft Rifles at. With the remaining 10 rounds in my magazines I was hoping to get at least a couple shots on my paper target setup a good 80 feet away but did not have much luck, I even reloaded the 15 round stick magazine 2 more times and gave it a go but again with no success! The Airsoft BB’s seemed to want to angle off in all direction usually up and to the right or left right before the 80 foot target, perhaps I would have had much better luck at 60 feet?

All I can surmise from this higher range Field Test is that the ASG TAC-6 CO2 Airsoft Rifle is not really a long range Airsoft gun at least with the .25 gram Airsoft BB’s I was using, maybe heavier Airsoft BB’s would settle down a bit more? I can say at ranges up to 40 feet the ASG TAC-6 CO2 Airsoft Rifle did perform just fine so keep that in mind when looking into buying one of these as smoking cans at 30-40 feet will be no problem and make for some fun times in the back yard or even basement makeshift gun range.

Make sure to also watch my Table Top review for the ASG TAC-6 CO2 Airsoft Rifle.

Categories: 6mm, Airsoft, CO2, Field Test, Review, Rifle, Semi Auto, YouTube Video, Repeater Tags: ASG, TAC-6

ASG TAC-6 CO2 Airsoft Rifle Table Top Review

No Comments

Type: Airsoft Rifle.
Manufacturer: ASG.
Model: TAC-6.
Materials: Plastic with some internal metal parts.
Weight: 3.5 pounds (1588 grams).
Barrel: 12 inches, metal non-rifled.
Length: 36 inches.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: 6mm BB's.
Ammunition Capacity: 15 round metal stick magazine.
FPS: 440.

Trigger Pull: The double action only type trigger pull on the ASG TAC-6 CO2 Airsoft Rifle is not too heavy but it is rather long so really quick rapped fire shooting will require some finger work. The trigger reset is right at the begging of the pull so you need to make sure you allow the trigger full range of motion or you may miss the odd shot.

Accuracy: I haven't done my Field Test Shooting video just yet for the ASG TAC-6 CO2 Airsoft Rifle but will shortly so stay posted for that video. ASG claimed the fps to be right around 440 and I am assuming with .20 gram Airsoft BB’s, I will most likely busing .25 gram Airsfto BB’s for my testing so I am hoping for around 400 fps or so. With the fiber optic front sight and fully adjustable rear peep sight I shoudl be able to get some decent rounds on target downrange and hopefully get a nice grouping.

Build Quality: The ASG TAC-6 CO2 Airsoft Rifle is mostly plastic but feels pretty good in the hand with decent fit and finish. There are some metal internal part along with the outer barrel and top rail but for the most part the ASG TAC-6 CO2 Airsoft Rifle is all plastic including the trigger and front and rear sights.

Realism: The ASG TAC-6 CO2 Airsoft Rifle is not a replica of any modern rifle that I know of but it does look a bit like a Beretta CX4 Storm especially the back half of it. The flash hider and top and bottom raise add to the realism.
Available From: The Replica Airguns Store.

Pros:

  • Very customizable with rails top and bottom.

  • Comes with a rather nice Bipod that can be used with other rifles.

  • Front and back removable Iron sights are very usable, fiber optic in front, peep in back.

  • Safety switch is in a great location for right handed shooters.

  • Canada version comes with black flash hider.

  • Mostly plastic but solid construction.

  • Rubber Butt Pad is nice and thick.

  • Removable barrel to reduce size for easier transportation.

  • Also come in 4.5mm Steel BB version.

  • Optional Integrated laser can be added.

Cons:

  • DOA Trigger pull is a bit long which will slow down rapid fire shooting a bit.

  • Mostly Plastic Polymer build.

  • Why not a longer inner barrel for possible more fps?

  • CO2 is in the Pistol grip and not the magazine so may not be great for on field battles.

Comments:
This may not be the most exciting Airsoft Rifle I have reviewed, it does look kind of cool and the price is right compared to other Airsoft Rifles. Who is it really for? I would say someone looking for an Air Rifle for plinking in the backyard or basement that perhaps want's a little bit more safety in terms of using plastic BB’s rather than Steel BB’s. Sure you can use the ASG TAC-6 CO2 Airsoft Rifle for Airsoft wars but most people want something a bit more realistic in terms of looks and function. Because the ASG TAC-6 CO2 Airsoft Rifle does have built-in Popup it shoudl be able to reach out to longer ranges so we will have to see if it can perform decent at longer ranges when I do my Field test Shooting Video.

My YouTube Table Top Review Video for the ASG TAC-6 CO2 Airsoft Rifle:

Categories: 6mm, Airsoft, CO2, Repeater, Review, Rifle, Semi Auto, YouTube Video Tags: ASG, TAC-4.5, TAC-6

Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter Field Test Review (Sort of)

1 Comment

I will say right off the bat this Field Test Shooting Video for the Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter did not go as well as I would have wanted it to! The HPA tank itself worked really well but I believe the adapter was faulty as it was destroying the seals on my tank and not regulating very well.

I still wanted to publish this video regardless as not all reviews go as planned, some fail horribly but I would rather be honest and transparent about it rather than have you believe every product is a perfect.

There will always be problems even with really great products there can be defects. I plan to get a new adaptor and try this Field Test Review Video again but for now you can have some fun watching me at least have some success using the Air Venturi 3000 PSI Aluminum HPA Tank with Stock on my Rap4 Rap5 MP5.

You can also watch my Table Top Review Video for more details and info on this product!

Categories: 4.5mm / .177 cal, Accessory, BB, Bulk Air, Field Test, Full Auto, Full Auto Fun, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, RAP4, RAP5 4.5 BB, Sig MPX, Sig Sauer ASP

Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter Table Top Review

No Comments

Type: Airgun Accessory.
Manufacturer: Distributed by Air Venturi.
Model: Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank.
Materials: Aluminum.
PSI: 3000.
Capacity: 13 CU.
Output PSI: 1100.
Diameter: 2 inches.
Length: 10 inches.
Features: Two ASTM burst disks, integrated pressure gauge.
Accessories included: Buttstock, CO2 Adapter.

In this Table Top Review Video I go over the features and benefits of the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank system, what to expect and some of the Pros and Cons for it.

I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!

Pros:

  • Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.

  • Smaller tank means if you are using a foot pump it won’t take all day to fill up :)

  • Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.

  • Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.

  • Not effected by colder temperatures compared to CO2.

  • Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.

Cons:

  • Still takes a while to pump up using a foot pump system.

  • Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.

  • Will need access to a pump or compressor to use it.

  • Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.

Comments:

I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.

Categories: Airsoft, Accessory, BB, Bulk Air, CO2, Paintball, PCP, Pellet, Pistol, Review, Rifle, Semi Auto, YouTube Video, Full Auto Tags: AirVenturi

Air Venturi HPA Tank - KJWorks M9A1 GBB - EMG Combat Master - Crosman P1 - ASG TAC-6 Update Preview Video

No Comments

In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.

First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.

  • 13 Oz Aluminum

  • 10 Inches Long

  • 2 Inches Diameter

  • Integrated Pressure Gauge

  • Includes Buttstock

  • CO2 Adaptor Included

  • 3000 PSI Fill

  • 1100 PSI Regulated

Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 370 fps

  • 25 Round Magazine

  • 2 Pounds

Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 9.4 Inches

  • 366 fps

  • 28 Round Magazine

  • 2.4 Pounds

Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.

  • 4.5 mm Steel BB’s

  • CO2 x 1

  • 4.2 Inch Barrel

  • 330 fps

  • 19 Round Magazine

  • 2.4 Pounds

  • Comes with Laser Sight

Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.

  • 6mm Airsoft BB’s

  • CO2 x 1

  • 36 Inches

  • 440 fps

  • 15 Round Magazine

  • 3.5 Pounds

Categories: 4.5mm / .177 cal, 6mm, Accessory, Airsoft, BB, Blowback, Bulk Air, CO2, Gas, GBB, PCP, Pistol, Replica Airguns News, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, KJWorks, M9A1, EMG, Combat Master, Crosman, Crosman P1, ASG, TAC-6

Crosman Full Auto Quick Reload Magazine Review for DPMS - MPW - R1 - A4-P

No Comments

I have been wanting to test out the Crosman Full Auto Quick Reload Magazine for a while now and finally got around to it. The weather was cooperating with me so I went outside for this one and setup a bunch of cameras to make the many many magazine reloads a bit more interesting for my viewers.

The Crosman Full Auto Quick Reload Magazine has a hopper that is said to hold around 300 4.5mm Steel BB’s which I can attest it does in fact hold at least 300 BB’s. The Crosman Full Auto Quick Reload Magazine like their regular Crosman Full Auto Magazines holds two 12 gram CO2 Cartridges, so the question is, will I be able to get through most of the 300 BB’s without reloading the CO2?

Watch my struggle a bit to figure out the exactly how to properly use the Crosman Full Auto Quick Reload Magazine and then quickly eat through 300 or so BB’s blasting pop cans down range!

Categories: 4.5mm / .177 cal, Accessory, BB, Blowback, CO2, Field Test, Full Auto, Full Auto Fun, Review, Rifle, Semi Auto, YouTube Video Tags: Crosman, R1, Crosman R1, Crosman Remington DPMS SBR, Crosman MPW, Bushmaster MPW, A4-P

Sig Sauer ASP MPX .177 Cal. Pellet Rifle Canada vs USA Version Field Test Comparison

No Comments

Looking at the 2016 US version of the Sig Sauer ASP MPX .177 Cal. Pellet Rifle verses the more resent Canada version we have in our Canada Replica Airguns Store it is hard to really see any difference other than my US version is all black and Canada version is two tone desert tan with black highlights. To be honest I really like both color schemes but that will be a personal preference.

In this Field Test Shooting Comparison video my main goal was to see if there is any significant performance difference between the two versions. Did Sig Sauer perhaps detune the Canada version as is often the case with Canada versions of Airguns? Did Sig Sauer make any changes internally and improve the accuracy or shooting characteristics of their newer Canada model?

I am happy to say both version performed really similar, maybe the US version shot just a little bit hotter but they where within around 5 fps of each other so the same test on a different day could yield the opposite results. The same is true for my accuracy test shooting 10 rounds 30 feet downrange on a paper target. This time the Canada version shot just a tad bit tighter I would say just under an inch grouping but then again the US version was really close with really only 1 pellet extending the grouping out just over an inch. A different test I am sure and the results may be switched? After all I am only human and this was all shot using the open sights on both guns using a sand bag as a rest and sitting in a chair in the back to help with stability.

The good news is we have the Sig Sauer ASP MPX .177 Cal. Pellet Rifle available in both our Canada and US online Replica Airguns Stores so where ever you buy them from you are basically getting the exact same gun!

Categories: 4.5mm / .177 cal, Blowback, CO2, Comparison, Field Test, Pellet, Review, Rifle, Semi Auto, YouTube Video Tags: Sig MPX, Sig Sauer ASP

Sig Sauer ASP MPX .177 Cal. Pellet Rifle Canada vs USA Version Comparison

No Comments

This Table Top Comparison video is also a bit of a revisit since I reviewed the US version of the Sig Sauer ASP MPX .177 Cal. Pellet Rifle back in 2016 when it first came out. I actually had to go across the border and bring it back across with me which can be a lot of fun dealing with Canada Customs border agents. They are well meaning but often don’t fully understand their own import guidelines for Airguns. After about an hour or so I was able to convict the CBSA officer that no my Sig Sauer Airguns where not regulated Firearms and no they did not require any registration or transfer permits.

Anyway that was 5 years ago and now we have the Canada import version which makes purchasing one of the Sig Sauer ASP MPX .177 Cal. Pellet Rifles so much easier and to be honest there really isn’t any difference as far as I can tell since my original US version even though it had a claimed fps of up to 600 was actually closer to somewhere in the mid 400’s using standard .177 caliber lead pellets.

Below are the basic specifications and if you want more info than that either watch the video or checkout my Original Table Top Review for the Sig Sauer ASP MPX .177 Cal. Pellet Rifle since both the original US and newer Canada versions are virtually identical…

Type: Pellet Rifle.
Manufacturer: Sig Sauer ASP
Model: Sig Sauer MPX ASP
Materials: Metal and Nylon Fiber build.
Weight: 7 Pounds (3300 Grams).
Barrel: 8 inch steelrifled.
Propulsion: 88 or 90 Gram CO2.
Action: Semi Auto,double action only.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 30 rounds belt fed.
FPS: Up to 575-600 fps (When shot by a Unicorn) Probably closer to around 450fps

I will be following this Tabel Top Review for the US and Canada Sig Sauer ASP MPX .177 Cal. Pellet Rifles with a Field Test Shooting Comparison to see if anything has really changed interns of velocity and accuracy so stay posted for that video coming out very soon…

Categories: 4.5mm / .177 cal, Blowback, CO2, Comparison, Pellet, Repeater, Review, Rifle, Semi Auto, YouTube Video Tags: Sig MPX, Sig Sauer, Sig MCX, Sig Sauer MCX, Sig Sauer Virtus

ICS CPX-APE SF1 AEG Airsoft Rifle Field Test Review

No Comments

In this Field Test Shooting Video I perform my usual Chronograph and Accuracy tests in the Replica Airguns Indoor Sea Can Shooting Range to find out what the actual feet per second velocity is and how accurate the ICS CPX-APE SF1 AEG Airsoft Rifle is in both semi auto and full auto. Watch my Table Top Video if you are looking for more info on Specifications and Details along with a full tear down of the ICS CPX-APE SF1 AEG Airsoft Rifle.

First up I place 6 rounds through my Chronograph to see what the real world velocity is and the ICS CPX-APE SF1 AEG Airsoft Rifle was able to average 391 fps using .25 gram plastic Airsoft BB’s. ICS claims the ICS CPX-APE SF1 is capable of fps up to 460 fps but this would be using lighter .20 gram Airsoft BB’s which I believe is entirely possible!

ICS CXP APE AEG Airsoft Rifle Right Side Angle.png

Next I put a fresh paper target on my metal backstop 30 feet downrange and proceeded to shoot 10 round in semi auto to see how tight of a grouping I could get. I was happy to see that 7 of my 10 rounds all grouped nicely within the 1.5 inch bullseye and only 3 came out just slightly increasing the grouping to around 2 inches but still closer to 1.5 inches. When I switched over to full auto and emptied the 300 round magazine into the target, amazingly the grouping still seemed to stay pretty close to 2 inches in diameter with some stragglers. The ICS CPX-APE SF1 AEG Airsoft Rifle punched a satisfying hole in my target going through several layers of cardboard.

As you can see in this YouTube Field Test Shooting Video the ICS CPX-APE SF1 AEG Airsoft Rifle performed very well for me living up to its pristine price point. You will pay top dollar for the ICS CPX-APE SF1 AEG Airsoft Rifle but will also get top quality with a ton fo features including an almost all metal/aluminum build, ambidextrous controls throughout, tons of add on capabilities using the 5 sided Keymod hand-gurd, fully adjustable folding stock and exceptional performance.

Categories: 6mm, AEG, Airsoft, Blowback, Field Test, Full Auto, Review, Rifle, Semi Auto, YouTube Video Tags: ICS, ICS CXP APE

ICS CPX-APE SF1 AEG Airsoft Rifle Table Top Review

1 Comment

Type: AEG EBB Airsoft.
Manufacturer: ICS
Model: CPX-APE SF1
Materials: Mostly Metal/Aluminum.
Weight: 6.4 pounds (2900 grams).
Length: 25.2 inches folded / 32.5-36.2 unfolded.
Hop-up: Yes adjustable.
Propulsion: AEG EBB (Electric Blowback).
Action: Semi & Full Auto single action only electric trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 300 rounds.
FPS: 460 fps.

Trigger Pull: The trigger pull on the ICS CPX-APE SF1 AEG Airsoft Rifle is pretty much like most AEG Electric trigger operated Airsoft Rifles. Usually mid range, light and with no real noticeable release point since it is an electric on and on switch at the end of the day and not really mechanical. Of course you can elect between semi and full auto operation at will.

Accuracy: I have not done my actual Field Test Shooting video review for the ICS CPX-APE SF1 AEG Airsoft Rifle but plan to tackle this video next on my list so this week for sure, stay posted of this one as I have not Field Tested any ICS Airsoft Rifles to date and really don’t know what to expect!

Build Quality: The G&G ICS CPX-APE SF1 AEG Airsoft Rifle is extremely well made as the price tag would suggest. You are going to find metal almost everywhere on this product including the all aluminum upper receiver. The only plastic I could find on the ICS CPX-APE SF1 AEG Airsoft Rifle was in the magazine and the folding butt stock. Everything else is metal/aluminum including the upper and lowe receivers, the sights, the rails and all of the controls. Fit and finish feels great as-well!

Realism: The ICS CPX-APE SF1 AEG Airsoft Rifle is not a replica so to speak of any one particular gun in production but does have some AR and perhaps SCAR attributes to it. Perhaps there needs to be a real steel version of this gun as it does combine a bit of the best of a both platforms. The ICS CPX-APE SF1 AEG Airsoft Rifle is sold for sure with great weigth and feel to it being that it is mostly metal. All the controls work exactly like you would expect on a the real powder burner and you can totally take this Airsoft rifle apart in just a minute or two with virtually no tools.

Available in the: Replica Airguns Store

Pros:

  • Mostly metal construction with full aluminum upper receiver.

  • Tons of rail attachment options with the 5 sided Keymod rail hand-guard.

  • Fully adjustable pop-up iron sights.

  • Most everything is ambidextrous: Selector switch, Magazine release, Charging handle, Sling mount.

  • Rear folding stock has tons of positions, 6 in length and 5 for cheek rest.

  • Super easy access to everything, hop-up, gear box, inner barrel, outer barrel.

  • Electric blowback system for slight recoil effect.

  • T-window in magazine for quick ammunition checks.

  • FPS is nice and high, great for longer range shooting.

Cons:

  • On the expensive side but very high quality.

  • Limited battery options as space for a battery is tight.

  • May have a bit too high of fps for closer quarter indoor Airsoft games.

Comments:

The ICS CPX-APE SF1 AEG Airsoft Rifle is not an inexpensive product and may be a bit out of touch for Airsofters on a tighter budget. That said it is really well thought out and well built Airsoft product that is ready to go with no real upgrading required. You may want to show on an optical or red dot sigh, perhaps a tac light or fore grip? Nothing you need right away. There really isn’t one thing I can point out that makes this gun so great, it is a combination of everything. when it comes down to it the ICS CPX-APE SF1 AEG Airsoft Rifle kind of has it all going for it. I am looking forward to seeing just how well it performs during my Indoor Field Test. I have high hopes!

Categories: 6mm, AEG, Airsoft, Blowback, Full Auto, Review, Rifle, Semi Auto, YouTube Video Tags: ICS, ICS CXP APE

Which Full Auto BB Rifle Performs Best - Full Auto Rate of Fire and Accuracy

No Comments

This is a bit of a different test than my usual Indoor Field Test Shooting Video I make here in the Replica Airguns indoor shooting range. I don’t test the feet per second with my Chronograph, I don’t test how accurate each gun is shooting in semi auto. Instead this Full Auto BB Rifle comparisons is to find out which Full Auto BB rifle has the highest rate of fire and which one stays on target the best shooting 25 rounds in full auto, all in one burst.

The guns I use of this Full Auto BB Rifle Full Auto Rate of Fire and Accuracy Test are:

Make sure to watch my Vimeo Full Auto BB Rifle Full Auto Rate of Fire and Accuracy Comparison to see how they compare!

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Field Test, Full Auto, Full Auto Fun, Review, Rifle, YouTube Video Tags: Umarex, Crosman, KWC, Mini UZI, Crosman Remington DPMS SBR, Thompson M1A1, Legends M1A1, AK-47, AK1, Kalashnikov AK47, Umarex Legends MP

Outside Shooting the G&G SMC-9 with Insta360 Camera Mounted to it

No Comments

It was a decent day today, not too cold and not raining at least at the time I and ethics video :) I figured with my new Insta60 One R and iVUE Vista cameras it would be a great day to test them out outside shooting with my G&G SMC-9 Full Auto Airsoft Carbine. I like the bak for more regulated Indoor Field Tests, these outside usually clay pigeon shooting videos are a lot more fun and I think a nice break for everyone.

So in this video I have three cameras rolling and switch camera switch back and forth throughout the video to make the experience more immersive. I have cameras setup front and back (Sony RX100 IV in front & Sony HDR-AS15 Back), along with my iVUE camera glasses and my Insta360 One R mounted to the barrel of my G&G SMC-9. All in all I think the video turned out well. It may be time to upgrade my Sony Action Camera as it is probably the oldest camera in my collection and you can see in the video it does not look as good as the other cameras.

Categories: 6mm, Airsoft, Blowback, Field Test, Full Auto, Full Auto Fun, GBB, Gas, Pistol, Rifle, Semi Auto, YouTube Video Tags: Insta360 One R, iVUE Vista, G&G SMC9, G&G