UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS requirement using a .20 gram Airsoft BB. In my previous video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol but swapped out the longer barrel for the shorter barrel to see how much the sorter barrel reduces velocity and also if there is an impact on accuracy? Make sure to watch that video to get the scoop on the shorter barrel with both the Umarex Glock 17 dam Glock 19 GBB Airsoft Pistols
For the velocity portion of this test I placed several .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 355 average FPS reading which is very close to the claimed 360 FPS when using .20 gram Airsoft BB’s so if I had been using a lighter BB I would have for sure seen velocity up and over the 360 FPS.
In terms of accuracy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol also performed really well, maybe not as well as the short barrel Glock 19 Gen 3 I tested just last week that seemed to group just a little bit tighter and was a little bit more well vented on the target. Both the Glock 17 and Glock 19 shot a bit low but I am sure a slight hop-up tweak could rectify that. I did however manage to get around a 2 - 2.5 inch 10 shot grouping.
So in summary both the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols at least for now come with the longer barrels only and so you options are to either cut down the existing barrel or buy a shorter barrel and replace it, that is unless you like the look of the long sticking out barrel ;) You will get a velocity drop of around 75 FPS with the shorter barrel installed but I would say accuracy should be about the same at the end of the day.
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS cut off using a .20 gram Airsoft BB. I wanted to see how much of a difference the shorter barrel would make so I will be comparing the short barrel with the long barrel to find out the FPS and accuracy differences. In the Video I only shoot the Umarex Glock 19 Gen 3 GBB Airsoft Pistol with the short barrel but in my next video I Shot the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel for comparison.
For the velocity portion of this test I placed 5 .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 276 average FPS reading with the slowest shot hitting 274 FPS and the fastest shot hitting 278 FPS so really close. Keep in mind I was using .25 gram Airsoft BB’s rather than .20 gram Airsoft BB’s so I would imagine the Umarex Glock 19 Gen 3 GBB Airsoft Pistol even using the shorter barrel should hit closer to 300 FPS with the lighter Airsoft BB’s.
In terms of accuracy the Umarex Glock 19 Gen 3 GBB Airsoft Pistol also performed really well, I did not make any adjustments to the gun after installing the shorter barrel not even to the hopup. I was pleased to see a fairly well centered 10 shot grouping mostly within a 2 inch grouping with perhaps one flyer extending that group to about 2.5 inches. All shots where well centered left to right but just a light bit under the target, a quick hopup adjustment should rectify that.
My next Vimeo Video will be focusing on the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel to see what kind of velocity gains we get for it and if the longer barrel helps with accuracy at all so look for that video early next week!
In this our first dedicated video made to be uploaded to our New Replace Airguns Vimeo page, I talk about what exactly happened to us over on YouTube at least forma eh very little info we have what I feel happened which is still very confusing and we are still trying o make sense of it all…
I cover the initial email we received from YouTube on July 22nd at 12:18 am that our Replica Airguns YouTube channel of some 15 years with over 1000 Videos uploaded, some 350+ thousand subscribers and around a half billion videos views had been been terminated just like that! Apparently there was a Countrified Claim made, whom that was from and what product/s are in question is still a huge mystery to us.
I also read off our appeal that we presented to YouTube / Google LLC but that appeal in turn was denied quickly, probably an automated generic response, not even sure if a real person even looked at to be honest.
I slo mention an email we received for YouTube a little bit before all of this happened basically stating that gun videos will start to get strikes on them as YouTube has detrained any type of gun related video is against their policies so it will not be long until all gun related YouTube channels are gone, be warned. YouTube is pushing hard the leftist agenda on their platform so if you view yourself as a more right wing individual you may have to satin looking to other platform to get your Video information from…
I made an Appeal to YouTube several days ago regarding their “Counterfeit Complaint” and subsequent termination of our Replica Airguns YouTube Channel but have not yet heard back from them yet?
If anyone out there has any sort of connection or influence with the powers that be within YouTube, I ask that you reach out to them on our behalf. Our Replica Airguns Channel and future presence within the Airgun community is hanging on a thread as we had so much of our business invested with YouTube.
Below is a copy of the Channel Termination Appeal I sent to YouTube, it would have been longer but it needed to stay within 1000 characters as per their limitations:
“I was notified July 22nd that because of a Counterfeit Complaint our YouTube channel of some 15 years with 350,000 subscribers, a half a billion videos views and 1000+ videos published had been terminated.
On the charge of a Counterfeit Complaint. We have never had such a claim made to our channel as we do not sell or promote counterfeit products on our YouTube channel, online store, or website.
www.replicaairguns.ca
www.replicaairguns.us
We only sell licensed products that we buy directly from companies that own licenses to sell such products. For example: Umarex, Crosman, Daisy, ASG, Sig Sauer, Gletcher, Air Venturi, Cybergun… to name a few.
If we are in violation of a Counterfeit Claim then all the above mentioned companies should also be in violation and have their YouTube channels terminated? Along with every other YouTube channel that reviews/sells any Airgun/Airsoft gun that resembles a real gun and that also sells such products from the above mentioned licensed companies.”
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
Type: Blowback GBB Airsoft Pistols.
Manufacturer: Distributed by Umarex.
Model: Glock 17 Gen 4 & Glock 19 Gen 3.
Materials: Metal & Polymer.
Weight: 1.66 Pounds (642 grams) / 1.64 Pounds (634 grams).
Barrel: Smooth bore 10.8 inch barrels.
Propulsion: Green Gas or Propane.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 22 / 19 round drop out full size metal magazines.
FPS: Claimed 410 with .20 gram Airsoft BB’s.
Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols is fairly short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety like the real steel versions.
Accuracy: At this point I have not shot either of the long barrel Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols so I can only quote what Umarex is saying in terms of FPS which is around 410 using Green Gas or Propane. These longer barreled versions should shoot fairly hot compared to the much shorter barreled versions and since i do have a short barrel Glock 17 Gen 4 I may also compare it at the same time to see what the actual barrel length does in terms of fps velocity. Of course my Field test Shooting video will also focus on accuracy add see what can be accomplished shooting a 10 shot grouping at 30 feet down range.
Build Quality: The Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols seems well made overall. It does seem a little bit underweight but still feels solid enough in the hand, Glocks are not known for being all that hefty. The Slide is metal but has a bit of an unusual finish that makes it look a lot like the plastic frame rather than a more shiny metal look. All the parts seem to fit nicely, maybe even a bit snug at first as I noticed the side had a bit of friction to it but seems to be working in nicely now.
Realism: The Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols look the part of these Glocks all day long. Other then the slightly lighter weight it would be hard to tell off hand until you remove the magazine and take a closer look. All the parts work as you would expect them to, similar to the real steel version and you can even fully field strip the them which makes getting to and adjusting the hop-up easy enough to do.
Available From: The Replica Airguns Store.
Pros:
Decent weight and feel to them, build quality seems good.
Really nice looking replicas of the original Glock 17 Gen 4 / Glock 19 Gen 3.
Fully Glock licensed via Umarex.
Easy to see white dot sights front and back with rear sight adjustable for windage.
Recessed barrel for added realism when cut down.
Accessory rail for adding a laser or tactical light.
Full size drop out metal magazines that holds the Green Gas and 6mm Airsoft BB’s.
Warning instruction are nice and discreet under trigger guard.
Nice light SAO trigger as the blowback action pre-cocks the internal hammer/striker.
Working trigger safeties.
No red tips and more realistic outer barrel size.
Cons:
Only comes with the longer barrel so you need to either cut it down or replace it with a shorter barrel.
No way to put a mock suppressor on it to keep extended barrel.
Comments:
Getting the Umarex BB versions of the Glock 17 and Glock 19 has for sure been a bit easier since fps velocity is not a factor. So it’s great that we at least have a way to import these two Umarex Glock GBB Airsoft Pistols into Canada! Yes some home modifications may be required to cut down the inner barrel as the long extended barrels are certainly not practical for every day shooting. That said with the extended long barrels I did get out and shoot a few rounds through them and the added barrel length really does allow for a much faster velocity Airsoft BB making these Umarex GBB Airsoft Glocks more like snipper pistols :)
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this YouTube Update Preview Video I go over a couple new Umarex Glock Licensed GBB Airsoft Pistols that I feel require a bit of explaining. Essentially we already stock these same Umarex Glock Blowback Airsoft Pistols, but in the CO2 magazine versions. The Umarex Glock 17 Gen4 and Umarex Glock 19 Gen3 I highlight in this video come with Green Gas Magazines and both have extended inner barrels to allow for Canada import to increase the velocity to our over 360 fps using a .20 gram Airsoft BB.
Usually Green Gas Airsoft Pistols with extended inner barrels will have the ability to unscrew the extension and will even come with a shorter replaceable barrel but in this case all you get is the longer one piece inner barrel. My suggestion is to either cut down the long inner barrel to fit within the out barrel or purchase a short inner barrel when they are available.
At the moment we do not have either one of these Airsoft Pistols listed in our Replica Airguns Stores but they should pop up shortly!
Type: GBB Airsoft Pistol.
Manufacturer: WE Airsoft
Model: 1039 M2
Materials: Mostly all metal build.
Weight: 2.43 pounds (1100 grams).
Barrel: 4.53 inches, non-rifled.
Length: 8.5 inches.
Propulsion: Green Gas
Action: Semi & full Auto, single and double action trigger.
Ammunition Type: 6mm Plastic Airsoft BB's.
Ammunition Capacity: 26 round full size dropout metal magazine.
FPS: 366+.
Trigger Pull: The trigger pull on the WE M92 GBB Full Auto Airsoft Pistol is good in both single and double action. Double action as expected has the longer heavier pull but is still smooth and fairly light with a predictable release. Single action shooting has a much shorter trigger pull with a bit of take-up and an even lighter release than in double action shooting mode.
Accuracy: This is one of those times I actually performed my Field Test Portion of my Review first so I do have some feedback in terms of the accuracy and velocity for the WE M92 GBB Full Auto Airsoft Pistol. WE claims an fps of around 366+ using the extended barrel that comes with it so this is how I tested it. I did use .26 gram airsoft BB’s so the fps was a bit lower but I did get close to 320 fps, So you should expect around a 20% increase in FPS using .20 gram Airsoft BB’s, so closer to 360-380 fps. In terms of accuracy I did notice that the WE M92 GBB Full Auto Airsoft Pistol shot rather low for me, as much as 8 inches at 30 feet out, perhaps adjustment get hop-up will fix that, at longer ranges it should… That said I found I was able to get around a 1-5.2 inch 10 round grouping at 30 feet out. In terms of full auto, all I can say is don’t expect to hit very much you point at as the gun really likes to rock around!
Build Quality: The WE M92 GBB Full Auto Airsoft Pistol is a really gorgeous looking pistol and has one of my favorite looking finishes in that stainless steel look. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all in all this Airsoft pistol performed great for me with no mechanical problems.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE M92 GBB Full Auto Airsoft Pistol is no exception! All mechanical parts work as intended and you can easily field strip the WE M92 GBB Full Auto Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with good weight to it.
Crisp firm full blowback operation.
Excellent fit and finish.
No markings on the metal parts at all, just the WE branding on the grips.
Color matching magazine.
Gun will accept real Beretta M9 grips.
Semi and full auto selector safety switch.
White dot sights front and back.
Good fps, right around the claimed 366 using .20 gram Airsoft BB’s.
Very believable working replica of the real steel Beretta M9 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No marking on the gun if that is important to you?
Shot rather low in my testing but hop-up and barrel change may fix it.
Almost unusable in Full Auto mode.
The WE M92 GBB Full Auto Airsoft Pistol is one of the nicer looking Airsoft Beretta M9 pistols on the market and is comparable in quality to other higher end brands like KWA and KJWorks. The price point is also in line with what you are getting. I really like the Stainless - Silver - Chrome finish or what ever you want to call it… One thing I was not able to determine 100% is if this version is in fact the Gen 2 version but I do believe it is given that it has the black gas tube in it. We just don’t have it advertised as such. If you’re in the market for a Beretta style M9 Pistol then consider the WE M92 GBB Full Auto Airsoft Pistol as a solid choice.
I haven’t reviewed many WE products over the years as they where not part of our inventory in the Replica Airguns Store. The good news is we do carry a selection of their pistols in our Canada Store including the WE 1039 M92 GBB Full Auto Airsoft Pistol I review in this video along with some 1911’s. In this Field Test Shooting Video I test out the WE 1039 M92 GBB Full Auto Airsoft Pistol in the Replica Airguns Sea Can Indoor Shooting Range to find out what the real world velocity and accuracy is.
Starting with the velocity portion of the test I place 6 rounds through my Chronograph using .25 gram Airsoft BB’s and I averaged 317 fps which is about right considering the claimed fps is 366+ using .20 gram Airsoft BB’s. The temperature was also not overly hot or cold in the Sea Can so in warner shooting conditions the fps will up a bit too.
Next I performed my accuracy test where i generally shoot 10 rounds on a paper target for 30 feet back ling a rested shooting position, sand bag up front and sensated in the back. I found the WE 1039 M92 GBB Full Auto Airsoft Pistol was shooting a good 6-8 inches low at this range with the default hop-up setup so I had to aim near the top of my target to place rounds closer to the bullseye for the sake of the video. I would say the WE 1039 M92 GBB Full Auto Airsoft Pistol is capable of 1-2 inch 10 rod groupings, my test was closer to 2 inches but I can see potential for sub 2 inch groups. A quick hop-up adjustment should bring the aim point closer to where the rounds are actually hitting. I did perform a full auto mag dump and the WE 1039 M92 GBB Full Auto Airsoft Pistol was able to get through all 26 rounds with a full mag of gas but as expected accuracy was not very goo dat all as the heavy blowback action really throws this gun around.
All in all the WE 1039 M92 GBB Full Auto Airsoft Pistol is a really nice Airsoft pistol that performs fairly well and in a game situation would get the job done nicely. It’s also a real looker with it’s stainless looking finish. Keep posted for my Table Top Video I will be making shortly for the WE 1039 M92 GBB Full Auto Airsoft Pistol.
In this Field Test Shooting Video I put the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol through its paces to see how well it performs in the Replica Airguns Indoor Sea Can Airgun Shooting Range. I first place 5 rounds through the chronograph to see what the actual real world velocity is and then I shoot 10 rounds on my paper target 30 feet downrange to see how tight of a grouping I can get with it.
For my Chronograph Test I was using .25 gram Airsoft BB’s so the velocity will be a little bit under the claimed 370 using .20 gram Airsoft BB’s. The temperature was average, not hot or cold so right around room temperature. My 5 shot sting resulted in an average of 312 fps so I would guesstimate an additional 50-60 fps using the .20 gram BB’s since the Airsoft BB’s I was using where ab out 20% heavier than what was claimed. So 370 is for sure possible with the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol.
Going onto my accuracy test, again I used the same .25 gram Airsoft BB’s and placed 10 rounds back to back into my fresh paper target setup 30 feet away. As usually I had my hands resting on a sand bag up front and I was sitting in the back which helps get a fairly stable shooting position but not without some human factor involved. I did manage to place 4 rounds right inside the 1.5 inch bullseye but 6 did come out with my last shot being a bit of a flyer hitting rather low on the target. If I removed the flyer form the equation the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol did mange to shoot a 3 inch grouping. I do feel I can do better with this Airsoft pistol when I dial in the right Airsoft BB’s, hop-up and of course get a bit more use to shooting it.
All things considered, I really like the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol! It has one of the best triggers I have ever reviewed with a nice combination of short take up and light predictable trigger release. The blowback action is fast yet not overwhelming and the overall feel of shooting this gun is very satisfying. Make sure to also checkout my Table Top Video Review for the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol where I go into more details about the specifications and features along with some nice close up video.
Type: GBB Airsoft Pistol.
Manufacturer: Made by EMG.
Model: TTI STI 2011 Combat Master.
Materials: Aluminum & polymer components.
Weight: 2.4 pounds (1100 grams).
Barrel: 5 inches (127mm) metal non-rifled.
Propulsion: Green gas.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 28 round drop out full size metal magazine.
FPS: Claimed 370.
Trigger Pull: The single action only trigger pull on the EMG TTI STI 2011 Combat Master is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, at least up there with the best for sure!
Accuracy: At this point I have not shot the EMG TTI STI 2011 Combat Master so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will ahed to wait till I perform my Field Test Shooting Video coming up shortly…
Build Quality: The EMG TTI STI 2011 Combat Master is for the most part an all metal gun with a CNC Machined Aluminum Slide and metal slide along with mostly ,metal parts throughout. The guide rod is stainless steel and the barrel is also aluminum with an anodized rose gold finish. The fit and finish is awesome on the EMG TTI STI 2011 Combat Master with attention to detail everywhere. The only plastic I could find on this Airsoft pistol would be the grips and the skeletonized trigger.
Realism: The EMG TTI STI 2011 Combat Master is based off of the STI 2011 but is really a replica of the John Wick pistol used in the John Wick 3 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped.
Pros:
Super crisp, light and short SAO trigger.
Fit and finish is excellent, very little slide wiggle.
Extremely close replica of the custom STI 2011 pistol used in the John Wick 3 movie.
Rear sight is fully adjustable and is not too bulky.
Fiber optic front sight helps with quick targets acquisition.
CNC machined two tone Aluminum slide with metal frame.
Rose Gold barrel looks great!
Full size high capacity 28 round double stack metal magazine.
Ambidextrous thumb safeties.
Working grip safety as you would expect on a 1911 based gun.
Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.
Super crisp and fast blowback action, great for action shooting.
Licensing all over this gun true to the real steel version..
Cons:
Comes with the red tip but can be remove pretty easily.
Need a tool to remove the two part guide rod and barrel (don’t lose the screw!).
No dot’s on the rear sight.
Comments:
The EMG TTI STI 2011 Combat Master has got to be one of the most gorgeous and sticking Airsoft Pistols I have reviewed so far. Just everything about this pistol looks and feel great. For a $299 Canadian Pistol you get a really well made high quality product that will be a collectors item to own for years to come. It’s not a small or light gun but for it’s size it feels really well balanced in the hand but for those with small hands it may be a bit too much of a handful. If you see them in stock on our website, make sure to grab one while you can!
In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.
First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.
13 Oz Aluminum
10 Inches Long
2 Inches Diameter
Integrated Pressure Gauge
Includes Buttstock
CO2 Adaptor Included
3000 PSI Fill
1100 PSI Regulated
Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.
6mm Airsoft BB’s
Green Gas / Propane
370 fps
25 Round Magazine
2 Pounds
Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!
6mm Airsoft BB’s
Green Gas / Propane
9.4 Inches
366 fps
28 Round Magazine
2.4 Pounds
Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.
4.5 mm Steel BB’s
CO2 x 1
4.2 Inch Barrel
330 fps
19 Round Magazine
2.4 Pounds
Comes with Laser Sight
Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.
6mm Airsoft BB’s
CO2 x 1
36 Inches
440 fps
15 Round Magazine
3.5 Pounds
It was a decent day today, not too cold and not raining at least at the time I and ethics video :) I figured with my new Insta60 One R and iVUE Vista cameras it would be a great day to test them out outside shooting with my G&G SMC-9 Full Auto Airsoft Carbine. I like the bak for more regulated Indoor Field Tests, these outside usually clay pigeon shooting videos are a lot more fun and I think a nice break for everyone.
So in this video I have three cameras rolling and switch camera switch back and forth throughout the video to make the experience more immersive. I have cameras setup front and back (Sony RX100 IV in front & Sony HDR-AS15 Back), along with my iVUE camera glasses and my Insta360 One R mounted to the barrel of my G&G SMC-9. All in all I think the video turned out well. It may be time to upgrade my Sony Action Camera as it is probably the oldest camera in my collection and you can see in the video it does not look as good as the other cameras.
I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.
This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.
Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!
The other online e-petition we need to sign is the change.org petition.
And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.
https://petitions.ourcommons.ca/en/Petition/Sign/e-3201
Dear (MP),
I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.
"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:
replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)
(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices
(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if
(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."
The long and short of it, Bill C-21 is an attack on law abiding Canadian gun owners and goes so far as to include the Daisy Red Ryder BB gun and many other Airguns as a Prohibited Firearm in Canada.
I am not a Lawyer or Bureaucrat so this video is my personal take on how I perceive the new Gun laws and Bill C-21. Please do your own investigation on these new laws and come to your own conclusions.
I don’t ask this often, please like and share this video with as many people as you can in Canada and outside of Canada. This is a new level of attack on Canadian Gun rights and we need to stand up for our gun rights or there will be no more guns in Canada eventually. This could happened in your country and has already happened in many others.
Make sure to also sign the change.org petition and call/email your local MP’s and Firearms Officers
https://www.change.org/p/canadian-government-stop-bill-c-21
Make sure to also sign ePetition e-3201 to put a stop to Bill C-21:
https://petitions.ourcommons.ca/en/Petition/Sign/e-3201
Find your local MP:
https://www.ourcommons.ca/Members/en/search#
So how did we get here… Back in May of 2020 Trudeau (without going through Parliament) banned some 1500 (what he referred to as) Assault rifles. For the most part but not exclusive to, anything that looks scary with a semi auto action. Many rifles with semi auto actions that did not look scary where not on this banned list. Some bolt action rifles and even shotguns made it to this banned list of guns deemed by Trudeau as dangerous Assault Rifles.
Bill C-21 is now going after handguns in a similar capacity along with any Airgun that looks like a Firearm.
In this video I am going to focus mainly on the Airgun side of how Bill C-21 effects Canadians so we are talking about BB Guns, Pellet Guns, Airsoft Guns, even Paintball Guns. But do understand if you own a handgun or even a rifle, Bill C-21 is coming after many of those guns as well making them literally impossible to own and use in any capacity other than keeping them in a safe at all times until you die in which it has to be relinquished without payment to the government.
How does Bill C-21 effect Airguns? Previously most Airguns where classified as Firearms but where unregulated so they didn’t require registration or even a Firearms license to sell, buy, own or use. Bill C-21 wants to make any Airgun that looks like a firearm (other than an antique firearm) prohibited. This means you will not be able to import, sell, or buy them in Canada. You will be able to keep your existing Prohibited Airguns but with extensive limitations on how you can keep and use them. Basically no use at all.
For the most part you will want to keep your now prohibited Airguns in a gun safe at home at all times or you risk having them confiscated from you since if you are transporting or using an Airgun, the police have the right to ask you to produce a Prohibited Firearms license which if I am not mistaken has not been made available since 1991, so the vast majority of gun owners especially none license holding Airgun owners do not have a Prohibited Firearms license nor is there any way to obtain such a license. How convenient!
Who does Bill C-21 effect? Firearms in Canada is a Multi Billion dollar industry and Airguns are an ever growing part of that industry. Bill C-21 effects Importers, Wholesalers, Retailers, Gun Ranges, Airsoft Fields, Gun Organizations, Gun Groups and of course every Firearm and Airgun owner in Canada. Bill C-21 wants to eliminate many aspects of the firearms Industry in Canada putting large and small business out of business. Replica Airguns will be gone if Bill C-21 passes in Canada, a business I founded and have been part of for over 15 years affecting many employees, families and of course customers.
How will Bill C-21 by eliminating the vast majority of Airguns in Canada keep Canadians safer and save lives as it proposes? I’m tryin to wrap my head around this one… So please tell me how many Pellet Rifles where used in mass shootings? How many drive by shootings involved Paintball guns? How many suicides have there been with BB pistols? How many police officers have died at the hands of an Airsoft wielding mad person? I’m going out on a limb here to say probably zero. And if any of these Airguns had been used in any of these situations that would have been a good thing because no lives would have been lost perhaps except for the user of the Airgun.
I want to end this video off with an example and an analogy of just exactly how ridiculous Bill C-21 is and how it will do absolutely zero to protect Canadians from criminals.
Daisy Red Ryder BB Rifle (1940) Will now be a Prohibited Firearm in Canada
Crosman 38T Pellet Revolver (1964) Will now be a Prohibited Firearm in Canada
Crosman 357 Pellet Revolver (1983) Will now be a Prohibited Firearm in Canada
Air-Ordnance SMG 22 Caliber Full Auto Machine Gun (Modern Airgun) Currently and even after Bill C-21 will be an Unregulated Firearm in Canada with no license or registration required.
Analogy of how Bill C-21 is supposed to Make Canadians Safer:
Bill C-21 is going after law abiding Licensed and Registered gun owners and only allowing them to keep their now Prohibited Guns but not allowed them to use their prohibited guns in any capacity. Prohibited guns must be in a safe at all times unloaded and locked. You are not allowed to transfer them anywhere, you are not allowed to sell, loan or give them to another person, and upon death the prohibited gun/s must be relinquish to the Government. According to Bill C-21 this is apparently going to help stop non license holding non gun registered criminals from committing gun related crimes that for the most part do not obtain their firearms legally.
This is like saying that ICBC (Canadas Vehicle Insurance Agency) has looked into motor vehicle accidents and found that a high majority of vehicle accidents are caused by people that do not have drivers licenses and that do not have registered or insured vehicles, furthermore ICBC has come to the conclusion that vehicles related to these accidents often times are import sedans that have been lowered and tuned. So in order to reduce car accidents ICBC will be focusing on drivers with drivers licenses and registered and license vehicles that fit this description and any other vehicle they deem a possible threat , these registered and licensed vehicle owners will still be allowed to own their vehicles that fit this criteria and have them registered but they will not be allowed to drive their vehicle/s anymore. Their vehicle/s must be kept in the garage at all times and never driven. You can not sell or loan your vehicle/s to anyone and these vehicle/s will not be allowed to be imported, bought or sold anymore in Canada. Once you die your vehicle/s are relinquished by the Government without payment no matter what their assessed value.
Please make sure to sign the change.org petition and call/email your local MP’s and Firearms Officers
A really informative video on how Bill C-21 will effect Airguns (BB, Pellet, Airsoft, Paintball) in Canada.
It is important that we as a community understand the impact Bill C-21 will have on our sport, hobbies, and livelihoods. We know everyone is concerned with the possible outcome that this could have for our sport and we cant thank you all enough for for your support in this time. We want you to help you exercise your rights and voices. If there is a hope of saving our sport it will come down to letting our MP's know that we will not stand by and let the rug be pulled from under us. If you want more information regarding Bill C-21 and it's implications to firearms regulation we have some links in this post so you can read the proposed legislation yourselves. For now we would like to invite you to sign the petition at change.org and help us in the fight to keep Airsoft alive in Canada.
#stopbillc21
https://www.publicsafety.gc.ca/cnt/cntrng-crm/frrms/c21-en.aspx
https://www.change.org/p/canadian-government-stop-bill-c-21
