After many many requests to show how the Umarex Walther PPK CO2 Tab Modification is done I have relented to public demand. I don't actually cut my tab in this PPK CO2 Tab Modification Video but I do go step-by-step in detail and compare my modified Umarex PPK to my unmodified Umarex PPK. It is really very basic on how this is done and only a hack say and perhaps a file are all that is required to make the modifications to the PPK CO2 tab in order to make it flush with the bottom of the handle area.
Your best bet is to simply watch my YouTube Video located below and follow the steps there but here it is in text form:
Place an empty (already pierced) CO2 into your Umarex Walther PPK and tighten the unmodified CO2 tab until fully tightened, just like you would tighten a fresh CO2.
Take note at how many threads are exposed between the bottom of the handle and the top of the plastic CO2 tab, there should be about 2-4 threads exposed.
Unscrew the CO2 tab all the way, place the PPK BB Pistol so it is secure (in a vice of some sort) and use a hacksaw or dremel to shorten the CO2 screw just above the plastic tab at the thread location you previously noted. Be conservative as you can always cut or file the screw a bit shorter if your first cut was not short enough.
Now use the same hacksaw or dremel to cut a notch in the exposed cut area of the CO2 screw so that you can use a slot screwdriver to tighten the CO2 screw.
That's it - Enjoy your modified Umarex Walther PPK CO2 BB Pistol!
Watch my Vimeo Video of the Umarex Walther PPK CO2 Tab Modification Tutorial:
I do get requests from many of my viewers to do some real steel reviews and so far I have pretty much stuck with 22LR real steel reviews and my Tokarev real steel review. I recently purchased an interesting 10mm semi auto handgun used at a local used gun show and so I though I would share this rather interesting and no longer in production pistol with you. The handgun we are looking at today is the Wyoming Arms Parker 10mm S.S. At first place it looks a lot like a 1911 but it is different in several ways. the obvious traits are the safety on the slide and lack of a grip safety, it also has a very different looking handle and there are some internal differences also.
What drew me to the Wyoming Arms Parker 10mm S.S. was it's 1911 looks, the very nice stainless steel finish and the rather unusual 10mm ammo it was chambered to shoot. If your not familiar with the 10mm round it was developed by the FBI for sue by their field agents but was later determined to be a bit too much to handle for some of their smaller but later agents. The 10mm was then detuned and turned into the S&W 40 caliber which is essentially a shorter less powerful version of the 10mm.
Here are a bunch more photos that really show off the beauty of this pistol!
Definitely make sure to watch this video as I go through the gun and show you around, I also do a field strip and talk a bit more about the Miami Shootout that was the FBI's reason to look into the development of the 10mm Auto round.
This is not meant to be a full review of either the BB or Airsoft version of the Cybergun - KWC CO2 Blowback Mini UZI's but I do talk about specifications, show you around both guns, and put them both through a full Field Test so I guess in a way, perhaps it can be considered to be a full review ;)
I will list the specifications here for you but I am not going to get into details like Trigger Pull, Build Quality, Accuracy and Realism. You can check out my other video reviews for more information on the Mini UZI:
As I said you can check out all my other videos for info on these very accurate Mini UZI Replicas, I mainly want to go over some of the main differences and similarities for both the BB and Airsoft versions.
In terms of build quality they are made almost exactly the same and weigh in at a hefty near 5 pounds, the only differences are the inner barrel and magazines to accommodate the different sized ammo. The BB version has a 25 round single stack magazine that does not have a follower to stop the bolt from continuing to operate even after the magazine is empty. While the 6mm Airsoft version has a double stack magazine that holds 38 rounds and does have a follower to stop the bolt which can save you some unintentional wasted CO2.
The Airsoft Mini UZI version is distributed by KWC while the 4.5mm BB version is distributed by Cybergun, you will find the UZI and IWI licensing on the Cybergun 4.5mm BB version but not on the KWC 6mm Airsoft version.
Out of the box the KWC Airsoft Mini UZI is ready to go in both semi auto and full auto while the 4.5mm steel BB version will only shoot in semi auto mode, it can however be easily modded to shoot in full auto.
Both guns come in cardboard boxes with manuals, some BB's and an Allen key to tighten the CO2. The KWC Airsoft Mini UZI also comes with a handy speed loader.
There is a slight fps velocity difference between the two with the KWC Airsoft 6mm plastic rounds traveling at around 400 fps (with .20 gram BB's) and the 4.5mm Steel BB's traveling at right around 350 fps. In the field test portion I test both guns out on some water filled cans to see how each ammo type performs in terms of penetration.
Your best bet is to watch both my Table Top and Field Test Comparison Video Reviews and see for yourself how they compare!
Earlier this week my father called me up and asked if I wanted to head out with him to go do some hunting/shooting. He has his bear tag but for the most part, hunting with my Dad consists of driving around in his truck hoping to stumble on something since he can not walk all that far these days.
We had a great time just enjoying each others conversation and of course the beauty of Canada BC's Harrison Lake area. We also got to shoot some guns to "make sure they where sighted in and working correctly". I brought my Norinco 12 Gauge Homeland Security 780 which I needed to test out and I'm glad I did since it needs some TLC to get working smoothly. I also brought along my little Henry Lever Action 22LR which is always a blast to shoot. My Dad brought his Savage Arms 7mm Magnum just in case we did see a bear on this outing.
Long story short we didn't bring any meat back home with us but we did see some out of season doe and of course had some nice father-son time together...
Trigger Pull: The trigger pull on the Cybergun Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the P226 in single action mode, the pull is light and the take-up is fairly short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action next shot, double action shots are still pretty light but much longer in order to cock the hammer.
Accuracy: Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor.
Build Quality: The build quality is generally good and I was surprised at the finish on this model as the paint is not showing any wear marks so far, the fit is good with minimal slide and barrel wobble and everything is working very well with no problems so far with a fair amount of shots through it, guess you could say I like shooting this gun :) Most of the gun is metal with only the grips and a couple internal parts being plastic.
Realism: The Cybergun Sig Sauer P226 6mm Airsoft pistol is a replica of the real steel Sig Sauer P226 right down to the licensing and it really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig and all the mechanical parts work just the same including a working de-cocker and adjustable front sight.
Seemed to shoot a bit low for me, could adjust with hop-up a bit?
Only one magazine per Gas fill.
Comments:
I am a big Sig Sauer fan so it would take a lot for me to not give this gun a good review, with that said it performed pretty well, sure it was not the most powerful but I was using gas over CO2 so I was not expecting too much, it also shot a bit low for me but again that may have been because of the barrel mod so who really knows for sure at this point ;) And yes it came with that unsightly orange tip that I took short work of removing. At teh end of the day I still love it and it performed well without letting me down, just like a would expect from a real Sig Sauer!
My Vimeo Table Top Review of the Cybergun Sig Sauer P226 GBB Blowback Airsoft Pistol:
I usually do my Table Top Video Review first but this time around I did my Field Test Video Review first since I was all setup checking out a couple other guns at the time. When I do my detailed Table Top Video Review for the Cybgergun Sig Suer P226, I'll post the link here so stay tuned. If you have not already checked out my Barrel Mod Video for this same gun then check that video out where I remover the extended orange portion of the metal barrel and make the barrel flush with the end of the slide which is how the real steel version was originally made.
Getting back to the Cybergun Sig Sauer P226 GBB blowback Airsoft Pistol field test, as per usual I test this Airsoft semi auto gas blowback pistol on the Chronograph to see what kind of real world velocity I get and since I had some Green Gas on hand, I used it for this part of the review and got an average of 315 fps with a six shot string.
I also stepped back 20 feet and shot 10 times at my stationary target using a semi rested position (sand bag up front and kneeling in the back). Even though the Sig Sauer P226 shot a bit low I did get about a 1.25 inch group with the exception of one flyer that hooked down just a bit making the 10 shot group a bit wider at just under 2 inches. The low shot placement may have been caused by my barrel mod but since I did not do a before and after test, I can not say for sure?
Make sure to watch my YouTube Video of this Field Test as it also includes some nice slow-motion of the slide blowback at both 400 and 1200 frames per second.
Watch my full Video Field Test Shooting Vimeo Video below:
I have not done my official Table Top and Shooting Reviews for the Gas Blowback Airsoft Cybergun Sig Sauer P226 but I really wanted to cut off the ugly orange painted barrel tip, it was kind of driving me crazy! keep in mind here in Canada we are not required to have orange tips on our Airsoft guns, most of the all metal or all black Airsoft guns imported these days fall into the "airgun uncontrolled firearms" category. If you live in the US or other parts of the world you could be breaking the law if you do this mod so be warned...
Your best best is to simply watch my Vimeo Video as I show you exactly how I removed the orange painted portion of the metal barrel using a hack saw, file, vice and some sand paper. All in all it was not too difficult and only took about 15 minutes to complete...
I am happy to report back to you on all the new cool stuff I got to see at this years 2013 SHOT Show in Las Vegas. Make sure to also watch my Vimeo video at the bottom of this post for some first person styled play by play of my experience at the Vegas SHOT Show 2013. (like you're there with me ;)
First up I want to cover a new gun from ASG, I have been wanting to get my hands on the 4.5mm Bersa BP9CC and I finally got to, not only did I get my hands on it but ASG was kind enough to supply me with one to take home for review. You can get the Bersa BP9CC in both Blowback and non-blowback versions and also in either BB or Airsoft. I opted for the 4.5mm BB Blowback version. I will be reviewing this BB gun very soon!
ASG also had a very cool prototype of an Airsoft CZ Scorpion EVO 3A1 hopefully coming out soon.
While roaming around SHOT Show 2013, I came across an interesting booth from FlashFog Security. I often get people asking me about using an airgun as a home defense weapon and I strongly advise against this. If the intruder is not scared off by the gun there is little an airgun can do to actually stop them. The FlashFog system works by rapidly filling a room with dense fog combined with a strobe light effect which blinds and disorients intruders completely. There is little an intruder can do other then try and get the heck out of there!
UPDATE: FlashFog just added a new section to their website specifically for School Security to help keep our schools safer from potential safety threats! So check it out: School Security Smoke Screen
I was a bit surprised by Gamo this year, they tend to stay away from actual Replica's and generally make BB/Pellet guns that look like popular guns but not any gun in particular. Gamo has a new BB/Pellet MP9 based machine pistol that uses a similar mechanism to their P-25 and PT-85 so it can shoot both 4.5mm BB's and .177 caliber Pellets using a double ended 16 shot rotary magazine. It also has an internal blowback system so it should have some recoil feel to it! I am pretty sure it is semi auto only but still a nice addition to their lineup!
Gamo also brought out a new 4.5mm BB Blowback pistol called the C-15 which has a metal slide and plastic frame, it kind of reminds me of the Umarex HPP in how it looks and feels.
Umarex had several new products that I am sure everyone is going to like! One that I think will do really well is the Steel Force, the Steel Force is designed around the 4.5mm BB shooting Steel Storm platform so it has a 6 round burst blowback operation and holds the 2x12 gram CO2 in the magazine while the BB's go in a 300 round hopper that feeds into a 30 round spring fed internal magazine. Like the Steel Storm it will shoot around 430 fps. The Steel Force has the advantage of being styled after the AR platform so it has a collapsible stock which will make shooting very easy.
Another often asked for airgun replica is the historic German Luger. This year Umarex stepped up to the plate and introduced the Umarex P.08 4.5mm BB pistol. Sorry, no blowback or even a working slide on this one but it is all metal and has a very good weight and feel to it.
If you're a fan of the entry level Umarex XBG then you may be interested in the new Umarex T.D.P. 45 which is very similar to the XBG in looks and features but with a slightly different look to it.
If you've ever wanted to turn your pistol into more of a PDW styled gun, you may be able to depending on which Umarex gun you have? Umarex added a very cool accessory called the T.A.C Converter that converts your Umarex HK USP (BB-Airsoft), SW MP40 (BB), XBG (BB), CZ Enforcer (Airsoft) and Walther P99 DOA (Airsoft) into more of a tactical (PDW) or Personal Defense Weapon complete with for-grip, adjustable rear sight, lots of rail options and a foldable stock.
I am assuming the Crosman M4-177 Pellet/BB Rifle has been doing well for Crosman as they have expanded with some more similar assault styled air rifles. The Crosman MSR77NP pretty much looks like a classic M16 but is in fact a Nitro Piston break barrel pellet rifle able to shoot .177 caliber pellets at 1200 fps (I hope there is a 499 fps Canada version planned too?).
A new takeoff of the M4-177 is the MK-177 which also shoots .177 caliber pellets and 4.5mm BB's using a multi-Pump System but it uses an upgraded more efficient pump system that squeaks out more fps with less pumps. The Crosman MK-177 is designed after the FN SCAR and is available in an adjustable iron sight version or a Red Dot equipped kit version.
One thing you can never get enough of in my opinion is another 1911 pistol! Crosman is introducing their GI Model 1911BB Blowback 4.5mm CO2 pistol, the one they had on hand was more of a prototype so the slide was not operational but it will feature an all metal design, blowback operation, 450 fps and a 20 round drop out magazine. I am sorry to say but it looks like the Crosman C51 has been dropped from Crosman's lineup but if you want a similar styled gun you can checkout the KWC SW40F which is a very close airsoft version.
We recently started carrying G&G Armament Airsoft guns, you can checkout my review of the Xtreme 45. I did stop by their booth and they had some new products on display, the M1 Grand (all wood stock) Airsoft had it's magwell all wrapped up as G&G had a propriety magazine system they did not want their competition to see. G&G also had some very interesting targets that light up, when shot they would react by individually turning off so you could see if you hit it or not.
There was a rather large crowd at the KWA booth but it was a shared booth so it's hard to say what everyone was looking at, the KWA area was pretty full, I did talk to the KWA rep and asked him point blank if KWC and KWA where the same or sister companies and the answer was not at all. There are often a lot of guns that look like they could be from the same company, I guess there is a lot of copying going on ;) One gun from KWA I would love to get my hands on is the Kriss SMG!
Now keep in mind many of these guns I have highlighted today are not available yet and a lot of them should be coming out in the spring time frame so please try to refrain from repeatedly asking when I will review them and have them in the store, it takes time and as much as we all want them now, they get here when they get here!
Watch my Vimeo video of the Replica Aiguns at SHOT Show Vegas 2013
I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).
These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).
So make sure to get in on the savings and the chance to get your order free!
In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!
Ten Million Video Views Giveaway Plus CZ 75 - Glock Airsoft - Gamo Combat Pellet Revolver
Here is a sample of some of the items on sale right now...
I first want to say this isn't exactly a review, more of an overview. I do show you around this Chinese made Norinco Type 54 Model 213 9mm Tokarev copy but I don't shoot it or even talk too much about shooting it. I have shot my Norinco M213 and it's quit nice, especially when you consider this gun was designed back in 1930. The Original Russian made Tokarev was built to replace the aging Nagant M1895 revolver that the Soviet troops used as their sidearm.
The Tokarev looks a lot like the Browning FN Model 1903 and was more than likely based off of it but it is different internally utilizing a short recoil dropping barrel similar to what is used in a 1911. The original Tokarev was not normally chambered in 9mm but rather the Russian made 7.62mm round. Being that the original 7.62 round is longer than a 9mm Lugar, Norinco had to place a block inside the magwell to accommodate the smaller magazine. I think it's a good tradeoff so I can use my readily available 9mm rounds in it. Each magazine hold 7 rounds as they are single stack design, this does make the profile of the entire gun very slim.
Another feature to note, that is found on the Chinese Norinco Type 54 Tokarev copy is the addition of a safety. The original Tokarev did not have a safety on it. The safety is similar to what you would find on a Makarov.
I have several Norinco guns and from what I have seen, people either love them or hate them and it's usually the people that own them that love them and the people that don't own them that don't like them. This may be based on first impressions as many Norinco guns are not as refined as what you would see in a Smith & Wesson, Sig Sauer and many other higher end firearms. With that said the Norinco firearms kind of remind me of many Russian made guns which are more about how they work and less about how they look. The Norinco metal is tuff as nails and has a very high nickel content in it which is what makes it harder to refine.
Even today the Tokarev is a decent gun and I really love the history behind it, once you get used to it's unusual looks it really does start to grow on you and you can pick one up for pretty cheap these days, I only paid just over $200 for mine and it even came with 4 magazines.
Watch my Vimeo Video Overview of the Norinco Type 54 Model 213 9mm Tokarev:
When it comes to Airguns and Blank Guns, it's not often that an item is actually more money to buy in the US but with the Webley Alecto, it was actually more money in the US so I got to thinking, why not ship our Canada version to our US customers so they can save a few bucks! Both the US and Canada Webley Alecto are the same with only one exception, the Canada version has been detuned but this can be easily rectified with a simple valve modification (Instructions delivered after purchased from Replica Airguns).
Trigger Pull: The trigger pull on the Chiappa - Puma 1911-22 Tactical semi auto pistol is fairly heavy at the start of it's life at close to 10 pounds! This is a bit distracting but it has been reported that as the metals harden and the gun breaks in (Closer to the 2000-3000 round mark), you can expect a much lighter trigger pull of closer to 5 pounds.
Accuracy: I put about 500 rounds through the Chiappa - Puma 1911-22 and took some time getting used to how it felt and also shot several groups on target before I did my final test group. I shot two full magazines (20 shots) and was able to get a 6-7 inch group from 10 yards out (30 feet). I was shooting in a standing unrested position using the open sights unadjusted and my grouping was well center but just a tad bit high and to the left. Interestingly enough I had a nice tight 5 shot sub-group that all landed within each other almost dead center on target.
Build Quality: The Chiappa - Puma 1911-22 Tactical 22LR is not built out of the same hardened steel material (with the exception of some key high stress areas) as you would find in a large caliber hand gun as it is not necessary with the lower pressure of 22LR rimfire ammunition, but it is an almost all metal gun and seems to have decent fit and finish. Chiappa utilizes a special proprietary metal they call Chiappalloy throughout much of the pistol to make the 1911-22 look, feel and weigh about the same as a conventional 1911 45 auto.
Realism: The Chiappa - Puma 1911-22 Tactical looks the part for sure of a real 1911 A1 styled 45 auto. It even feels about the same weight and has a similar balance to it. On the outside you can tell because of the smaller diameter .22 caliber barrel and the lack of a working grip safety. Internally the 1911-22 has a fixed barrel which is not true to the original 1911 design but it does make the 22LR version more accurate and simpler in design.
Purchased From: Wholesale supplier.
Pros:
Inexpensive to purchase and shoot but still has that "1911" look and feel.
Came with two 10 round magazines.
Comes in a nice hard shell case.
Can add an accessory rail under the barrel.
Adjustable rear sight for windage.
Fixed barrel for better accuracy and less moving parts.
Nice realistic weight adn ballance to it.
Very easy to take down and clean.
Similar dimensions to a real 1911 and should fit most holsters and add-ons.
Has a secondary "tool based" firing pin lock for safe storage.
Trigger is very heavy at first - needs to be broken in!
Slide spring is very light which can lead to some cycling problems if you are not careful.
No working grip safety like the real 1911.
Plastic magazines.
Comments:
My Chiappa - Puma 1911-22 Tactical first impression was that it kind of had a blank gun look and finish too it which is not a bad thing but I wondered if it would take the abuse of constant 22LR rounds being shot through it and it most certainly did. Chiappa has put hardened steel where it needs to be and used their proprietary Chiappalloy where it is best suited. after about the first 100 rounds the 1911-22 stated performing consistently for me using a couple of brands of 22LR I brought with me and cycled both 22LR Standard Velocity and High Velocity just fine. I did notice it started to act up at around the 400 round mark but on inspection, the Chiappa 1911-22 just needed a cleaning to clear the debris that was forming in the breach area. I would also suggest keeping the magazines loaded up fore a few weeks to decrease the spring tension which helps with chambering the first couple of rounds out of a new magazine. Overall, I am really happy with my Chiappa 1911-22 purchase and plan to shoot this gun often and extensively!
My Vimeo Video Review for the Chiappa 1911-22 Tactical .22LR Pistol:
Trigger Pull: The trigger pull on the ISSC M22 semi auto pistol is fairly light at about 4.4 pounds and it has a nice predictable break point. Some people claim the trigger itself is a bit edgy but I did not find this the case for myself at least when shooting off several hundred rounds at a time. No blisters for me :)
Accuracy: I put about 500 rounds through the ISSC M22 and took some time getting used to how it felt and also shot several groups on target before I did my final test group. I shot two full magazines (20 shots) and most of my shots (17 out of 20) landed within a 3 inch group from 10 yards out (30 feet). I was shooting in a standing unrested position using the open sights unadjusted and my grouping was well center but just a tad bit high. I was very happy with these results.
Build Quality: The ISSC M22 is a very well made pistol in just about every way. The materials are very good and the fit and finish is excellent. There is nothing cheap about this gun and even after over 500 shots through the M22, it still looked brand new (after a well needed cleaning of course) with barely any wear marks to speak of. I especially liked the solid aluminum magazines. I have no doubt this 22 caliber pistol will last me for a long time.
Realism: The ISSC M22 may not be a bang on copy of a Glock but it certainly looks the part with only a few exceptions like the rear hammer, safety and fixed internal barrel. I have even heard you can use real Glock accessories with this semi auto pistol! Even the kick kind of surprised me, I was using high velocity 22LR rounds and they gave me a nice crisp recoil that of course was not as hard as a 9mm but never the less it was enough for working on double taps and rapid sight acquisition.
Purchased From: Wholesale supplier.
Pros:
Inexpensive to purchase and shoot but still has that "Glock like" look and feel.
Came with two 10 round magazines.
Very well made - no quality issues as far as I can tell.
Accessory rail under the barrel.
Very usable sights similar to a real Glock. (also fully adjustable).
Ambidextrous safety and de-cocker.
Similar trigger safety as a real Glock.
Very easy to take down and clean.
Nice compact and light weight.
Similar dimensions to a Glock and may work with many of the same accessories.
Some Glock users may not like the external hammer and safety setup?
Some people have commented on it being a bit picky with certain ammo and the trigger being a bit edgy.
Comments:
I really fell in love with the ISSC M22 22LR Glock copy. I know this gun is going to get a lot of use and to be honest I'm not even worried about it. With the low cost of 22LR ammo I will be shooting this gun more than any of my other pistols simply because it's totally fun, and gives me almost the exact same experience as my larger caliber semi auto shooters at about 1/10th the price to shoot. I'm pretty sure I will even get out to the range more often knowing that I can shoot the entire day for about $20! I found the M22 to be reliable, accurate and comfortable while shooting so as far as I'm concerned the ISSC M22 is a real winner!
My Vimeo Video Review for the ISSC M22 Glock Copy .22LR Pistol:
As you know I have been doing some reviews of my 22LR "Real Steel" guns and I added a couple more to the collection I want to share with you all. From my past experience, airguners also like the low cost 22LR guns for a variety of reasons including reduced operating cost, low recoil, lots of places to shoot them and so on...
I took both these guns to the gun range and put several hundred rounds through them and by the end they where both shooting very reliable using inexpensive box Blazer 22LR ammo. I stuck with this ammo because it seemed to be working well. The Chiappa 1911-22 was a bit pickier at first but I think it was mainly to do with a rather stiff magazine spring, making it difficult for the first couple rounds to chamber, again most of this sorted itself out by the end of the shooting day.
My ISSC M22 really performed well, the slide was a bit tight at first creating a few failures to chamber and eject but after a few magazines it settled right down and would hammer through all 10 rounds with no problems. I am really loving this little 22LR Glock replica!
Stay tuned for my full reviews on both of these guns and enjoy my Vimeo preview video for now!
Good things come in pairs so I figured I'd get a Glock 22LR to go with my 1911 22 LR and since I already had another rather nice ISSC 22LR product the ISSC MK22 SCAR 22LR I picked up something familiar and went with the ISSC M22 22LR Glock-Styled semi auto pistol.
From first inspection it is really well made pistol, very similar in design to a Glock but with a few differences like the hammer and safety but still close enough to satisfy many large caliber Glock shooters. I am looking forward to shooting this one for sure!
Yes this is mainly an Airguns and blank gun website but every time I post something regarding my 22LR Firearms, I get lots of great feedback and it seems airguners are also into the small caliber firearms for many of the same reasons... cheaper to buy and shoot, can also shot them in more locations. Less recoil means less fatigue at the end of the day too.
I don't have much to tell you about my recently purchased Chiappa 1911-22 Tactical 22LR semi auto pistol but I will be doing a review on it down the road just a bit so stay tuned. So far it looks pretty nice and has the size and weight of a 1911 45.
OK, so I took a day off to appease the wife and did some "shopping" but then today it was back to business and I made the wife come along for the ride, she was a good sport about it so it all worked out!
I went back to Umarex and Crosman, just to verify a few things, first of all, the Umarex P38 is in fact a blowback pistol and it has a nice 400 claimed fps. I am looking forward to testing this one!.
I also went back to Crosman to checkout the C51 and the C*TT to see if the C51 Glock-ish looking replica had a polymer frame which it does and also to see if the C*TT is blowback which it is not :( But it is mostly metal and has a working slide so there is hope for the C*TT.
I dropped by the ASG booth but there was nothing really new there. I already have pretty much all their 4.5mm BB guns but they do have a nice selection of Airsoft guns, and speaking of Airsoft guns I am spending a significant amount of my time these days looking into the Airsoft market and what I can bring into Canada for sale. I have been talking with several suppliers and we should have some nice offering for us Canadians shortly so stay posted on this one...
Lastly, I have a few 22LR guns coming my way that I will be reviewing. yes I know they are not airguns but whenever I review a 22LR gun, I get a lot of questions and if you are like me, and you have your PAL, the 22LR guns make a nice addition to your low cost guns that you can buy and shoot for a fraction of the cost of the larger caliber guns out there.
Today I stopped by Chiappa and checked them out. I have a 1911 Tactical 22LR on the way that I will be reviewing and I may get some more 22LR from Chiappa down the road if the 1911 reviews well. By the way I also have a 22lR M22 ISSC "Glock" styled pistol also on it's way for review!
Well that's it from the Vegas SHOT SHow 2012 for now, see you on the flip-side!
Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 900 rounds.
FPS: 360-500.
Trigger Pull: The trigger pull on the IZH Drozd Blackbird is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved, by means of electronics.
Accuracy: The Drozd Blackbird is designed to be a machine gun and so testing it in single shot mode for accuracy is kind of taking it out of its element. Even so it did reasonably well, but when when I flicked it over to full auto it actually seemed to tighten up and start grouping even more centered and closer together considering the vast amount of rounds coming out of the barrel all at once :)
Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is made out of plastic, it's really more of a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, much of the magazine and many internal parts. This air gun is very durable!
Realism: The Baikal Drozd Blackbird IZH MP-661K is not a replica, but it does look like a sub machine gun of sorts, I'm really just not sure exactly what it looks like as it kind of has its own look. When you start shooting it, looks just don't seem to matter anymore, all you can think about is how much damage is happening down range.
A bit more accuracy in semi auto mode would have been nice.
On the pricey side.
Comments:
The Baikal Drozd Blackbird IZH MP-661K takes all the fun you get with the Classic Drozd and gives you even more fun. It may be one of the more pricy BB machine guns on the market but it is well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve its performance and looks dramatically. If you are looking for the absolute top player in the BB Machine gun category then the Drozd Blackbird is the top contender with its excellent build quality and performance along with the nearly unlimited modifications available to make the Blackbird perform up to anyones standards.
My Vimeo Video Review for this Russian made Blackbird BB Machine gun:
I'm kind of doing this one backwards this time around. I was going to do the table top review of the Baikal Drozd Blackbird first but the weather was just too nice to pass up today to not get outside and give this gun a thorough testing.
I will be posting the table top review in a few days with all the specification (Here it is now) but if you're looking for some basic info on the Blackbird you can checkout our online store where you can find some statistics on the Drozd Blackbird and you can also checkout my Drozd Classic Review where I do a short comparison between the Drozd Classic and the newer updated Blackbird version.
I had a lot of fun shooting this gun, it lays down a lot of steel in a very short amount of time and has a virtually endless 900 round BB hopper that just keeps on going. During my testing I shot close to 400 rounds or more using one 88 gram CO2 cartridge and even near the end the Baikal Drozd Blackbird had pretty good feet per second performance.
My Baikal Blackbird does have some upgrades: (JimC Barrel, Full Auto-High RPM Mod Chip, Added Accessory Rails, Red Dot Scope, Tactical Light, Laser and Bulk Air kit) but the stock version is "almost" as fun :)
Thought I would share this photo of a Magazine doubler for his Umarex MP5K PDW one of my viewers (Daniel) sent to me. He lives in the UK and bought his from a supplier out his way. I don't sell them sorry but I have included an Amazon link for my US viewers.
