Right off the bat I have to say I had a great time making this Field Test Video Review of the RAP4 RAM X50 (Sig P226) .43 Caliber Blowback Paintball Pistol. I did something I don't generally do, I went back into my forest area of the property and setup some human sized targets (5 gallon buckets) and did some tactical real world shooting simulation, it was a lot of fun and the RAP4 RAM X50 Paintball Pistol worked perfectly for this as I could very easily see exactly where I was shooting and also did not have to worry too much about rebounding ammo.
This video only covers the shooting performance of the RAP4 RAM X50, so checkout my Table Top Review for things like the Specifications and Features.
In this video I start out by doing a Chronograph Test and shoot not only Paintball rounds but also some Rubber bullet and got very good average FPS results using both ammo types (288 fps using .43 caliber Rubber Balls and 279 fps using .42 caliber Paintballs).
I also tested the accuracy out from 20 feet away in a semi rested position and got about an 8 inch group with a full 9 round magazine, which on a human sized target would do the trick for sure. Keep in mind this is not a target pistol! My Tactical Field or should I say "Forest test", showed that this paintball pistol performs very well when used in a simulated shooting scenario.
I can really see a use for a gun like this, mainly for training oneself on how to acquire targets quickly and how to improve your tactical shooting skills.
Action: Semi auto, single & double action with blowback.
Ammunition Type: .43 caliber paintball or rubber bullet.
Ammunition Capacity: 9 round magazine.
FPS: 250-300fps.
Trigger Pull: The trigger pull on the Real Action Paintball RAP4 X50 is rather nice, being a true blowback action gun, the cycling of the slide not only chambers a round but also pre-cocks the hammer allowing for a very smooth and light trigger pull in single action mode. There is also a de-cocker that allows you to release the hammer without activating the firing pin and placing the hammer in a half cock position rested about 2mm off the firing pin.
Accuracy: I did not expect amazing result with The RAM X50 Paintball Pistol in my preliminary testing as it does use rather light weight and fairly small caliber Paintballs that will be susceptible to wind gusts and the seems on them will make them a bit more turbulent than a standard Pellet, BB or Airsoft round. Even so I was able to hit pretty much any moderate sized target I shot at and I would assume in a battle situation I could place most shots on a human sized target fairly well as along as I was not too panic stricken ;)
Build Quality: The RAP4 RAM X50 Sig Sauer P226 styled Pistol is built very well, it does have a polymer frame but the gun overall has lots of metal parts and a very good overall 2.2 pounds weight to it dry. The blowback action is very snappy and all the mechanics and fit and finish all look and function very nicely. The only function that was not working on my "used" gun was the slide catching on the last round. I have not looked into it too much to see what may be the problem but I can see some wear on the catch area of the slide that may be causing it. I have no idea how the previous owners may have cared for this Paintball gun but overall it is in good condition.
Realism:The RAP4 RAM X50 was primarily made to simulate real word shooting environments for Police and Military users and even though it is not branded and licensed as such, it is a bang on copy of a Sig Sauer P226 Semi Auto Pistol. Other than the exception of the CO2 Cylinder hanging a bit far out of the bottom of the handle, The RAM X50 would be hard to tell from the Real Steel Sig Sauer P226, especially when looking down the large .43 caliber barrel. The Blowback action and firm recoil help pull off the believability when shooting this Paintball Pistol.
Everything works pretty much like the real gun so a great training tool.
Fairly affordable in the US adn Canada.
Seemed to have Decent accuracy, decent amount of shots, about 3-4 good magazines
Nice light single action trigger.
Cons:
CO2 cylinder sticks out from the handle and looks a bit odd.
My slide does not lock back after the last shot, may be a potential wear problem?
Does not field Strip conventionally.
Comments:
I have had my eye on this paintball pistol for some time now, the first time I saw it, it was behind the counter in a Paintball store and generally in Canada they sell in retail shops for about $450+ so I have kind of been holding off to see if it woudl come my way a bit more affordably. The time came when I was able to leverage another sought after item I had and I was able to add this gun to my collection. I found that it shoots much like many of my other blowback airguns but perhaps with a bit more force than most. Shooting at targets 20-40 feet away was easy and the Paintball's had no problems breaking on contact with most medium to hard objects. I normally would not have a need for Paintball pistol but heck, why not if it looks this good and next time I go out to a paintball battle, I will have a surprise waiting for when I run out of rifle ammo or need to work in some close combat situations...
Some more updates for you, I received some more NcSTAR Accessories for my Canada Replica Airguns Store, some Red Dots, Scopes, Lasers, Tactical Lights, Rails, Bipods and some Vests, Slings and Holsters. I will be updating the Canada Store shortly with these very well priced items shortly so check back soon!
I also have a couple more blank guns that I will be conducting a Silent Auction on shortly: An EKOL Lady in Satin and an EKOL Special 99 in "White", which is more like a soft textured Nickel.
Lastly I also just picked up my first paintball pistol a RAM X50 and it is one I have been after for a while since I am a big Sig fan. It' basically an unlicensed Sig Sauer 226 that uses CO2 and chambers .43 caliber paintball and/or rubber balls. It is blowback and has a drop out 9 round metal magazine.
I just received some of my ASG Airsoft guns in my BC location and wanted to make an update video for you so you can see them up close and perhaps see how they stack up against their Airgun counterparts. Keep in mind many of my ASG guns are only available in the Canada Replica Airguns Store, we do have some ASG Airsoft guns for my US based customers but this time here in Canada I have more to offer my Canadian folks!
I am also super impressed with the high quality of the LMT Defender M4 Carbines, they are a serious bit of gear and have some very good heft to them, even more so than my full metal King Arms M4A1 I already sell and have done a full review of, not to take anything away from the Kings Arms product as it is very good at its price point.
I also received my first sniper rifle and have played around with it a bit to see what it is capable of. I added a bipod to the front and a 3x9 power scope as the ASG AW .308 comes pretty bare bones but ready for all you can throw at it. I can say it likes heavier Airsoft BB's, as the .20 gram ones I started with seemed to fly off in all directions due to the high velocity, even stepping up to a .25 gram BB tightened my group up significantly at 30 feet. I have heard this rifle really prefers heavy Airsoft BB's so I plan do do my review based on that information.
Enjoy my Vimeo Video Update focusing on the new ASG Airsoft lineup.
Trigger Pull: The trigger pull on the Daisy Powerline 5501 is about average, a bit long but fairly smooth and about a medium pull weight. The first part of the action loads a BB into the chamber and the second part releases the hammer which give the pistol a bit of a creepy first stage.
Accuracy: I was not impressed with how my Daisy 5501 performed in the accuracy portion of this review, it got about a 3 inch 8 shot group from 20 feet out in a semi rested position, in comparison many of my BB pistols can easily get a 1 inch grouping shooting this way. I may try a different brand of BB's even though the RWS BB's I used where of high quality, they just may have not suited this pistol? FPS velocities where a bit under the manufacturers claimed ratings but very close at a respectable average of 386 fps with my 8 shot test shooting on a somewhat cold day. Not bad for a blowback pistol!
Build Quality: The Daisy Powerline 5501 is a pretty much all metal pistol with what looks to be very good build quality. The 5501 is made in Japan, I have found most Japanese made guns to be well made in the past. The frame, slide, trigger, safety, slide catch, CO2 screw, and de-cocker are all metal and of course many of the internal parts too. The only plastic parts to speak of are the grips and the magazine. I would have liked to have seen the magazine with more metal in it but for the most part it is protected within the gun so you should be OK.
Realism:The Daisy Powerline 5501 is loosely styled after the Sig Sauer in combination with a Walther semi auto pistol. It is lacking a cut-out ejection port that would have added greatly to its realism. I would have also liked to have seen a metal magazine as it's seems a bit cheap compared to the rest of the pistol. I do like the fact that the barrel tip has a large diameter opening making the gun look more like the larger caliber weapon it is styled after. It's also one of the few BB pistols with a working de-coker on it.
The two-tone look is very nice with a stainless look to the frame.
Accessory rail makes adding a tactical light or laser easy.
Warning instructions on slide are color matched to be more discreet.
Very well designed CO2 tightening system and also well hidden.
Cons:
Did not shoot very accurately for me with the BB's I used.
Ejection port is not cut out, takes away from the realism a bit.
All plastic magazine.
No white dotes on rear sight.
Comments:
All in all I liked this Daisy Powerline 5501, other than the poor results I got in terms of accuracy using my chosen zinc platted RWS BB's, the Powerline 5501 was really very good in all other aspects. I think it is a rather nice looking gun with excellent build quality throughout with lots of metal giving the 5001 a nice 1.5 pounds weight. The Daisy 5501 had very heavy and snappy blowback while retaining decent shots per CO2 and respectable close to 400 fps real world velocities. This Daisy Powerline 5501 blowback BB pistol is priced at well under $100 making it very good value in my mind.
My Vimeo Video Comparison Review for the Daisy Powerline BB Pistol:
The STI Duty One 1911 Non-Blowback Airsoft Pistol is a full size replica of the actual STI Duty one 1911 pistol which is a modernized and upgraded version of the original classic Colt 1911. You will find features like; an integrated weaver rail for lasers and tactical lights, high rise beavertail grips, a unique serial number on each air pistol and STI licensed markings. (BUY NOW)
The ASG AW .308 very powerful spring operated Airsoft Sniper Rifle and has licensed Accuracy International AW .308 markings. Out of the box it shoots close to 2 joule and weights almost 7 pounds with its solid metal construction. The Sportline AW .308 has adjustable Hop-Up for accuracy and top rail for mounting a scope. (BUY NOW)
The ASG LMT Defender R.I.S. is a classic carbine with a few modifications. The normal front guard has been replaced with a full rail interface system (R.I.S.), that gives you plenty of opportunities to mount accessories. As the normal battery space is used by the R.I.S. the wiring to the battery goes back to the stock. The stock is a special sopmod stock with two compartments to house the battery. The functionality is similar to the other LMT ProLine models – Adjustable hop up, 1.5 joule power and semi & full auto. (BUY NOW)
The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.
Two well known firearms and accessory manufactures have joined forces to create this beauty of a Proline Airsoft AEG. The full metal Defender4 Carbine licensed by LMT upgraded with the S.I.R. rail system licensed by A.R.M.S.. A Selective Integrated Rail system (S.I.R.) offers a wide variety of options to mount tactical accessories. Quick and handy flip-up iron sights are mounted on the S.I.R. Strong and well built with what is probably one of the best out-of-the-box gearboxes, heavy reinforced with 8 and 9 mm bearings, steel gears, and ball-bearing spring-guide as well as an upgraded cylinder set. It can handle Li-Po batteries and shoots 1.5 joule (120m/s/394 fps) in semi- and full-auto mode with Easily adjustable Hop-Up. (BUY NOW)
The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.
As promised, the new ASG Airsoft Pistols have been added to the Replica Airguns Store and by the way none of them have the orange tip as they are all classified as Uncontrolled Firearms just like a standard Airgun!
Dan Wesson Airsoft Revolvers:
The legendary revolvers licensed by Dan Wesson These revolvers have authentic markings and an individual serial number stamped into the frame. The revolvers features a single and double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson BB revolvers are made of metal except for the ergonomical grip constructed in hard ABS plastic.
The 12g CO2 cartridge is stored under the grip and is easily accessed by sliding the grip to the side – easy-load style. Each of the 6 cartridges holds one Airsoft BB and is placed in the metal drum that rotates as each round is fired. The revolvers comes with a speed loader, changeable tactical rail and 6 cartridges.
The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer ÄŒeská zbrojovka, Czech Republic. This is the semi automatic 4.5mm airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the Airsoft BB’s are put in the drop-out magazine.
The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number.
The ASG Steyr M9-A1 Non-Blowback CO2 6mm AIrsoft BB pistol is a faithful copy of the real model Steyr mannlicher M9-A1 complete with licensed trade marks and a functional safety pin. You will get over 465fps shots from the 14 round drop out magazine and just like the real steal you can add a laser site or tactical light to the weaver style accessory rail.
Just a quick heads up for our Canadian customers waiting on Dan Wesson Revolvers, the ASG Airguns and some Airsoft guns have now cleared customs, we still have some more Airsoft guns from ASG coming down the road but at least we have some to start with for now.
PLEASE KEEP IN MIND that we have a very large backorder list and we will be doing our best to send out the backordered Dan Wesson starting tomorrow. It will take some time to get caught up so please try to avoid sending us an email about your backordered Dan Wesson, we are working very hard to get them to all of you and will update everyone with a tracking number as soon as yours ships.
If you are interested in some of the ASG Airsoft guns then make sure to check back over the next few days as I update our Airsoft guns section or our Canada Replica Airguns Store with the new ASG Airsoft items.
We have been waiting a while here in Canada for some of our ASG products to come back in stock. ASG provides us with our Dan Wesson line and the Dan Wesson Revolvers have been a very popular airgun to say the least. We did manage to get a few of them, mainly to fill some of the earlier back orders but this big order had to come by cargo ship and now it has arrived and has been with Canada customs for about a week so we should be close to having them for you!
The hold up on this shipment is because we have some ASG Airsoft guns in with the regular Airguns which is good news as we will soon be stocking some very nice ASG Airsoft Pistols and Rifles but the new Airsoft guns are the main reason that Canada Customs is taking their time giving their OK on this shipment.
My advice to anyone who has been waiting a long time for their Dan Wesson Revolver (Mostly the 2.5 & 4 inch versions) is to hold on a bit longer because the wait is almost over and we will sell out of these guns quickly so having your backorder in guarantees you will get yours.
It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...
I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.
I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!
I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.
Here are some of the guns that I will be reviewing over the next while...
Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)
Materials: Plastic (polymer) and some metal construction.
Weight: .92 pounds.
Barrel: 4.5 inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 shot full size drop out magazine.
FPS: 410.
Trigger Pull: The trigger pull on the Umarex Browning Hi-power Mark III is not too bad but has more resistance when the BB magazine is full as the first part of the trigger pull is dedicated to advancing a BB into the BB chamber, this is true in both single and double action. Shooting the Browning Hi-power in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull and as you can see in my shooting results the trigger did not effect the accuracy negatively at all!
Accuracy: Excellent for a BB shooter I shot a 1 inch 7 shot group from 20 feet out in a semi-rested position and this is was with open sights! I also shot freehand in double action, shooting quickly and also got a very respectable 2.5 inch pattern that represented an additional 36 shots. When it came to FPS performance the Umarex Browning Hi-power Mark III was a bit lower than claimed which is not unusual with most airguns (369 fps averaged 8 shots). The Umarex Browning Hi-power did get well over 100 shots per CO2 but I would have given up a few shots for a bit more power.
Build Quality: I would have liked to have seen this air pistol replica use a lot more metal and perhaps some more working parts. As is it is mostly plastic and very light weight but the fit and finish are good overall and the gun should work just fine and hold up over time.
Realism: The Umarex Browning Hi-power Mark III is a licensed replica of the actual Browning Hi-power Mark III semi auto pistol. It is a very close "looking" copy in almost every way. I like the fact that there are no side screw holes that you find in many plastic moulded BB pistols and the Browning Mark III has a working ambidextrous safety and magazine release just like the real Browning Hi-power Mark III. The let down here is in the .92 pound weight of the Browning BB version, it just doesn't have that "gun like" weight to it which makes it feel a bit cheap. I would have really liked to see this BB pistol in all metal and with a working slide, and I would not have minded to pay extra for the upgrade in materials.
Mostly plastic which makes the gun feel kind of light weight.
No working slide.
Could have just a bit more power even at the expense of less shots per CO2.
No white dots on the sights?
Comments:
The Umarex Browning Hi-power Mark III BB CO2 pistol is a very good replica of the real steel version of this gun and in terms of "looks" alone does a good job making this pistol very believable. Now once you pick it up, you know it's not the real deal because of the plastic build and much lower weight. So with that out of the way, let's talk a bit more about what I did really like about the Browning Hi-power Mark III! I liked the excellent accuracy, easy to load and use full size drop out metal magazine not often found in a low price airgun like this, and I also like the fact that there are no screw holes on the side of this gun found in so many plastic and even some metal BB guns. So overall the Browning Hi-power Mark III is a good overall replica, has excellent accuracy and is really the only Browning Hi-power available in an airgun that I know about.
My Vimeo Table Top & Shooting Review for the Browning Hi-power Mark III BB CO2 Pistol:
I wanted to make a quick video to showcase a few items I will be reviewing and some of which are also for sale in the Replica Airguns Store.
First off we have a few of the new front firing Kimar Model 85's (Orange Slide) left in Canada. I stated out with 9 and I am not down to 3 so hurry on this one if you want one in Canada. If you are in the US, I also have them for sale in my US Replica Airguns Store in both Black and Nickel.
Next up I just wanted to show you a Kimar Lady K that will show up some time down the road in a video review, this item is now in my personal collection and sorry it is not for sale in either my Canada or US store at this time.
I have had lots of requests to review the Daisy Powerline 5501 and to be honest I have wanted to get this one for some time and even though it is available for sale in our US Replica Airguns Store I have not had the opportunity to pick one up until now so look forward to that review again some time down the road...
Last but not least I wanted to give you a closer look at the new Turkish made high powered Webley Tempest I have available in the Canada Store, these ones shoot as hard as legally possible within our Canada limitation to be classified as uncontrolled firearms and they make great compact pest control pistols that you can keep handy for when required.
OK, so that's it for now and be sure to watch the full reviews of these guns when I get to them shortly!
We where out of the Umarex Steel Storm for a while, I had a lot of people asking about this one so I thought I would let everyone know we now have the Umarex Steel Storm back in stock and for sale again in the Canada Replica Airguns Store.
Canada Customers only - Act fast on this one, I am selling the Cybergun Sig Sauer P226 X-Five Sight Rail Version at $30 off the regular price, this is for the first five customers that buy it! I am also throwing in five CO2 cartridges for free!
Keep in mind the sight rail version comes with a compensator, sight rail and adjustable rear sight and it's selling for less than the standard version right now!
Here is a bit of a heads up for some future reviews and YouTube videos. I have had a lot of requests to review the Gamo PT-85 and Gamo P-25 so I went ahead and picked up one of each. Now I do not currently sell these blowback air pistols in the Replica Airguns Canada Store but I do have them available in our US Replica Airguns Store.
I also took in an EKOL Lady in Chrome finish from a customer of mine looking to purchase another item in the Replica Airguns Store. Since I don't have this model it will get added to my personal collection of replica guns :) Either way we all benefit because now I have a new blank gun I can review for you all!
The fully licensed Cybergun Jericho 941 has been out of stock for almost half a year and now we have it again! Don't let this one slip through your fingers again. It's a really nice airgun for the money, well made with a full size drop out metal magazine and metal slide!
After what seemed like forever, we now have some more Cybergun Sig Sauer P226 X-Five's back in stock. And I am talking about the non-open or non-sight rail version, we never did run out of the sight rail version...
So if you have been waiting you can pick one up Right Now!
I received another airgun from Umarex USA, this time it was the Browning Hi-Power Mark III in a 4.5mm CO2 BB Pistol. (Thanks for sending it Umarex!) I did have to cross the boarder and bring it back which always adds to the excitement because you never know what to expect and how educated the CBSA guard will be? It did go pretty smoothly this instance so I had some time to make this short Preview video for you.
Here is some of the basic info about the Umarex Hi-Power Mark III CO2 BB Pistol and by the way it is available in our US Replica Airguns Store, sorry my Canadian customers will have to wait a bit...
If you're a Browning collector, this gun belongs in your vault. The Browning Hi-Power is such a sought-after firearm, so it's about time someone made an airgun replica! This lightweight pistol shoots 4.5mm steel BB's and will deliver hours of shooting fun for only pennies per shot. Since it's a copy of the real steel firearm, you can use this air gun just about anywhere to maintain firearm proficiency without the exorbitant ammo costs or range fees.
Type: BB air pistol. Manufacturer: Swiss Arms. Model:Sig Sauer GSR 1911. Materials: Mostly plastic construction with a few metal parts. Weight: 1.3 pound. Barrel: 4.5 inches, metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto, double action. Ammunition Type: 4.5mm BB's. Ammunition Capacity: 20 round magazine. FPS: 398 claimed - 450 real world. Trigger Pull: The Swiss Arms Sig Sauer GSR 1911 has a double action trigger with about a medium weight pull to it. It does feel somewhat long as the break point seems to take a while to get to but once you master where it is, you can shoot this BB gun with surprising accuracy. Accuracy: Once I sorted out the laser sight which took some MacGyvering (as explained in the video), this gun shot a nice tight pattern! For my quick test I shot free standing from 20 feet away and put 8 rounds into my target taking my time. I got about a 1.5 inch group which was very good and another note worth mentioning would be the Chronograph results I got, even though the Sig Sauer GSR 1911 CO2 BB pistol has a claimed fps of 398, mine came in consistently right around 450 fps!
Build Quality: The Swiss Arms GSR 1911 is mostly plastic and has very few actual moving parts, I'm personally not too worried about it, in fact the lack of moving parts means there is less to go wrong with it! I found the fit and finish to be good overall and as long as you are OK with the plastic this gun should be just fine for you. The only thing that would have been nice to see improved would be the laser and how it is adjusted. As is out of the box without modification, you will find that it easily moves out of aim. (I do explain how I fixed this problem in my video review) Realism: The Swiss Arms Sig Sauer GSR 1911 in terms of size and looks, is about what the real gun would look like, with the exception of the trigger which is kind of a strange looking combination of triggers mashed into one. Of course being a moulded plastic airgun, it is much lighter then the real steel 1911 and has the telltale screw holes on the right hand side. The magazine ejector does work but the real steel safety, slide catch/release, hammer and grip safety are all moulded into the plastic so they do not function. On a good note the barrel muzzle is large like a real 45 caliber adding to the realism. Purchased this gun from: The Replica Airguns Store.
Pros:
Much better than advertised FPS and good CO2 usage. (up to 200 shots).
Good accuracy once you get the laser working with the gun it adds to the ease of targeting.
Inexpensive and comes with lots of extra stuff that ads value. (Safety Glasses, Laser Sight, Starter BB's)
Well hidden CO2 tab and 45 caliber sized muzzle.
Full Sig Sauer licensing, decent replica in terms of looks
Drop out metal magazines, compatible with other airguns (Umarex Beretta Elite II, S&W M&P)
Cons:
Pretty much all plastic and not many working parts (less to go wrong)
light weight makes it feel a bit on the cheap side.
Trigger action is long and takes some getting used to.
Laser sight needs to be MacGyvered a bit to make it stay sighted in (again watch my video on how to fix this).
Comments: The Swiss Arms Sig Sauer GSR 1911 is pretty much what you would expect from a low cost airgun in terms of build quality, lots of plastic, with less working parts. This does not take away from the performance however as the GSR 1911 performed well in both accuracy and power. It also comes with the laser sight, safety glasses and starter BB's as an added bonus for about the same price as many entry level airguns on their own. If you like ultra realistic guns then this is on may not be for you, but if you want a good performer with the replica look and combined with a value package then I think you will be more than happy with the Swiss Arms Sig Sauer GSR 1911.
My YouTube Video Review for the Swiss Arms Sig Sauer GSR 1911 CO2 Air Pistol: