Type: Blowback Airsoft Pistol. Manufacturer: Distributed by Cybergun. Model:Taurus PT24/7 G2. Materials: Metal & Polymer. Weight: 1.86 pounds (844 grams). Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 19 round double stack full size metal magazine. FPS: Claimed 438 using .20 gram BB's.
Trigger Pull: The trigger pull on the Cybergun Taurus PT24/7 G2 Airsoft Pistol is Single Action Only and feels really good, it was much lighter than I expected and has a medium length take up, the reset positions the trigger fairly far back ready for quick follow-up shots. You'll also find a working trigger safety on this Airsoft Pistol which is a nice touch and ads to the realism.
Accuracy: At this point I have not shot the Cybergun Taurus PT24/7 G2 Airsoft Pistol, I imagine it should perform well considering it has an adjustable spin-up or hop-up along with a rear site that can be adjusted for windage. According to the manufacturers claimed fps, we should get around 438 fps using .20 gram Plastic Airsoft BB's. I will be a bit surprise if this Cybergun Taurus PT24/7 G2 Airsoft Pistol actually hits this rather high velocity but anything over 400 will be impressive.
Build Quality: Overall the Cybergun Taurus PT24/7 G2 Airsoft Pistol looks and feels really good. It has a nice weight to it but is not overly heavy. Everything feels tight and the finish looks great. the only thing I noticed that stood out a little bit was some flex in the forward part of the frame near the accessory rail. It seems to seperate just a little bit leaving a very slight gap and there is some flex here. I would not worry too much about this as it is not a structural consideration.
Realism: The Cybergun Taurus PT24/7 G2 Airsoft Pistol is a real ringer for the lead bullet firing version in almost every way and even has licensed trademarks on it through Cybergun but they are not exactly where you would find them on the real steel version, at least on the slide portion. Everything works like you would expect including full ambidextrous slide catch, safety, and magazine release. You can also easily field strip the Cybergun Taurus PT24/7 G2 Airsoft Pistol just like the real steel version. Available From: The Replica Airguns Store.
Pros:
Claimed to have a very high fps over 400 using .20 gram Airsoft BB’s.
Full length blowback action.
Supper accurate licensed Taurus PT24/7 G2 replica.
Excellent SAO trigger pull, very smooth and light.
Working trigger safety.
Double stack full size drop out metal magazine holds the CO2 and 19 BB’s.
Comes with additional back-straps in small medium and large sizes.
Adjustable rear sight for windage.
Fully ambidextrous controls.
Easily field strippable.
Red tip is easy to remove using boiling water to melt the glue.
Adjustable Bax hop-up.
Cons:
Comes with red tip installed and glued on.
Seems to have a little bit of frame flex in the rail area with a slight gap.
Safety selector is plastic.
Comments:
The most noticeable feature of the Cybergun Taurus PT24/7 G2 Airsoft Pistol is the claimed high FPS of 438 using .20 gram airsoft BB's. This seems kind of high for a full blowback Airsoft pistol but we will find out when I do my Filed Test Shooting Video Review for the Cybergun Taurus PT24/7 G2 Airsoft Pistol. Velocity aside the Cybergun Taurus PT24/7 G2 Airsoft Pistol is a very stylish gun, I have always been a Sig Sauer fan and it remind me a lot of the Sig brand but with a some more rounded finishing going on. The Cybergun Taurus PT24/7 G2 Airsoft Pistol has a lot going for it: Taurus Licensing, metal and polymer parts where you would expect them, fully ambidextrous working controls, adjustable rear sight for windage, adjustable hop-up, a working trigger safety, some power behind it and a full size double stack all metal magazine. It's also rather reasonably priced in our Replica Airguns Canada and US Online Store.
It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)
First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!
Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.
I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.
As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.
Wow, we had a great contest giveaway for the Umarex Ace in the Hole Single Action Army Revolver. We received 406 participants with close to 2000 separate entries, so thank you everyone that got involved. Unfortunately for the other 405 participants there can only be one winner and to see who that winner is you're going to have to watch my Contest Giveaway announcement video...
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PPQ M2. Materials: Metal & Polymer. Weight: 848 grams (1.87 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 9 Rounds. FPS: 290.
Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.
Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.
Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weigth to the gun.
Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.
Everything works pretty much like the real gun so a great training tool.
Adjustable yellow dot sights.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out.
Love the .43 caliber barrel opening, adds to realism.
Cons:
Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?
Magazine only holds 9 rounds, so you are going to need extras.
Blowback action is not full blowback, more like a typical BB airgun.
Comments:
I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)
First I wanted to wish everyone a Merry Christmas and Happy New Year, hopefully you get all the toys you have been wanting! Maybe we can help you out a little with that over on our Online Canada and US Replica Airgun Stores.
I also have a new Red Ryder Type BB Rifle to show off, this one is John Wayne licensed and called the John Wayne Lil Duke. At first glace it looks a lot like a Red Ryder but it has the large loop styled lever which is designed for easier use when wearing gloves, perfect for our Canadian weather ;) The John Wayne Lil Duke Lever Action BB Rifle has a really nice fit and finish, perhaps even a bit better than the classic Red Ryder BB Gun. I really like the real wood stock finish.
Another nice touch is that the John Wayne Lil Duke Lever Action BB Rifle comes with a lasso scope rail that you can attach just behind the rear iron sight to accommodate dove tail scope mounts. Just make sure to really tighten down the rear screw as it comes loose super easy due to the spring vibration. I would even recommend adding a bit of lock tight to the screw to be sure.
Here are some of the main specifications for the John Wayne Lil Duke Lever Action BB Rifle: 4.5mm Steel BB's, leaver action spring piston, 350 fps, 550 round magazine, 2.5 pounds, smooth bore 9.5 inch barrel, adjustable rear sight for elevation, included scope mount for 11mm dovetail rings, metal and wood build.
Before I get into this Field Test Shooting Review for the Umarex Legends Ace in the Hole SAA Pellet Revolver I did want to mention again that we do have a Contest Giveaway going on till the end of this month where we will be giving away an Umarex Legends Ace in the Hole SAA Pellet Revolver to a Canada or US Winner. Sorry we can not ship outside of Canada or the US due to airgun and import regulations. Make sure to scroll to the bottom of this review to enter the contest.
Back to the Field Test Shooting Review! Rather than just testing the 3.5 inch barreled Umarex Legends Ace in the Hole SAA Pellet Revolver by itself, I also compare it to two other Umarex SAA Revolvers, in 5.5 and 7.5 inches version. I wanted to see how the barrel length effected power and accuracy and I was kind of surprised at the results.
I shot three rounds from each Umarex SAA Pellet Revolver through my Chrony Chronograph and averaged them out for each gun. Umarex claims the Umarex Legends Ace in the Hole SAA Pellet Revolver to get around 340 fps and it shot an average of 323fps with a brand new CO2 and using 8.2 gram lead pellets, not bad at all considering the pellet weight and colder temperature of around 15 degrees Celsius. next I shot the 5.5 inch Umarex SAA Pellet Revolver in the same manner and averaged 347fps which is kind of what I was expecting die to the anger barrel. SO when I came to the 7.5 inch Umarex SAA Pellet Revolver I was expecting even higher results but was surprised by my results which where exactly the same as the 3.5 inch version coming in at 323fps? Perhaps the valve was a bit detuned on the 7.5 inches version, I am not sure?
Moving on to the accuracy performance for the Umarex Legends Ace in the Hole SAA Pellet Revolver. Again I sued the same 8.2 grain RWS flathead pellets and emptied a full cylinder into my paper target positioned 30 feet downrange. My accuracy result for the Umarex Legends Ace in the Hole SAA Pellet Revolver where decent with my 6 shoot group getting around a 2 inches and well centered on the target, just a lad high but not by much. I am pretty sure I pulled one of the shots so I think I should of gotten closer to 1.5 inches. Next I Shot the 5.5 inch UmarexSAA Pellet Revolver but seemed to struggle a bit with it. I found the 5.5 inch Umarex SAA Pellet Revolver shot to the left and my 6 shot grouping was a lot more spread out exceeding 2 inches by a bit. Lastly I tested out the 7.5 inch Umarex SAA Pellet Revolver and it was the clear winner placing all 6 rounds wishing the black bullseye getting close to a 1 inch grouping. I love it when that happens :)
Let's start this review off by first stating that this is also a contest, I know it's been a while but I am happy to announce that we will be having way more regular contests for our viewers and subscribers! To kicking things off with this new contest trend we are giving away an Umarex SAA Ace in the Hole CO2 Pellet Revolver to one lucky either Canada or US winner. Sorry for legal and shipping reasons we have to stay within Canada and the US.
And we're gong high tech with this contest implementing Gleam to allow a number of ways for you to get involved and have more chance to win! Go to the bottom of this post to get involved!
So I guess I better include a written review here to :) We'll keep it short this time since I am sure we are all mostly interested in the contest!
Type:Pellet Revolver. Manufacturer:Umarex. Model:Ace in the Hole. Materials: Full Metal. Weight: 885 grams (1.95 pounds). Barrel: Rifled Power Source: CO2. Action: Semi-Automatic. Ammo Type: .177 Pellets. Ammo Capacity: 6 Rounds. FPS: 340 using lead pellets.
Pros:
Short barrel increases draw speed.
Thumb spur hammer primed for rapid fire.
Realistic heavy metal frame with weathered finish.
Authentic rotation cylinder with loading gate.
Interchangeable clip-op front sights.
Has good combination of accuracy and power for a short barreled revolver.
CO2 Allen Key built into pistol grip.
Cons:
Shells must be loaded one at a time but can be kept in the cylinder.
Plastic sights detract a bit from realism.
The Ace in the Hole has more than one trick up its sleeve. This CO2 pellet gun is an original take on the classic Single Action Army revolver. The oversized thumb spur allows you to fan the hammer with your palm, like a real gunslinger. Swap in the sight that works best for your aim, or remove it entirely and shoot from the hip.
Overall I found it to be one of my favorite of the Umarex SAA Colt Revilers. I like that it's a pellet shooter and the Umarex Ace in the Hole is even capable of shooting decent weight led pellets at close to the claimed fps. The size and weigth of this CO2 Revolver feel perfect coming in at almost 2 pounds in an all metal airgun.
The weathered finish with the Ace logo imbedded in the pistol grips looks really great, the only distraction from the realism would be the plastic removable front sights. I am not sure why Umarex did this but it will help in quick draw situations. Overall the Umarex Ace in the Hole is a super well built and ultra realistic SAA Revolver that will not disappoint any old west airgun collector. get your while we still have them.
This was the first time shooting a blank gun in the new Sea Can and I can tell you it was pretty loud inside but of course I was wearing ear protection! In this Blank Gun Shooting video I test out the ARAL Model 1453 and 622K 9mm PAK Blank Guns and put 3 rounds through each of them.
Not everything went as planned. First off my high speed slow motion camera decided to not work :( and secondly I had some technical issues with both guns, well sort of...
Since the manual for the ARAL Model 1453 does not cover what I believed to be a safety on the back of the slide, I had no idea and was surprised to find out that rather than a safety, this selector switch is actually a semi and full auto selector which is kind cool but not so much when you're not expecting your blank gun to be shooting in semi auto :) Keep in mind this semi-full auto switch is only on the all black ARAL Model 1453 and not the two tone version.
Moving on to the ARAL Model 622K 9mm PAK Blank, I have a feeling that perhaps a different brand of ammo may have worked better in it. The 9mm PAK Blanks I used worked OK but I did get a failure to eject and the last round seemed to also not eject properly probably because there was no bullet in the mag too help direct it out of the breach area.
What do yo know, a new Blank Gun Review! It's been a while since I actually saw some new Blank Guns other than our ROHM selection that made it past our wonderful Canada Customs.
But still it's nice to hold a new Blank Gun in my hands even if it's not the best quality. The two ARAL blank guns I take a look at in this Table Top Video Review are the ARAL Model 1453 and ARAL 622K 9mm PAK versions. Both are front venting and both have double stack 14 round magazines. They also have threaded inner barrels however no flare adaptor came with either on of them and I only got an included manual with the ARAL Model 1453.
In terms of what exactly real steel guns do they look like or resemble? The ARAL Model 1453 is kind of like a big chunky and somewhat ugly looking Glock. I have nick named mine the RoboGlock :)
The ARAL 622K resembles a CZ 75 but it's a fair bit smaller in size and much shorter. The finish on my ARAL 622K is really bad, it looks like someone took a can of spray paint and painted it themselves. But still they are working blank guns, well let's hope so when I test them out in my upcoming Field Test Shooting video... Fingers crossed!
First off make sure to checkout my Table top review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol, it really is a nice Beretta Airsoft copy, perhaps one of the best out there!
In the Field Test Shooting Video I perform my standard Chronograph and accuracy tests on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol. I put 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's with a full propane filled magazine. My Sea Can indoor airgun range was warmed up sufficiently for a gas gun test but I found the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol did shoot a tad bit slower than the 330 or so claimed fps coming in closer to 300fps. Still totally usable for indoor airgun wars.
Moving onto my accuracy test I placed 10 shots on target 30 feet down range using a rested shooting position, sitting in the back and sand bag up front. This time I was impressed with how tight a group I got, I was able to get the bulk of the shots all within about three quarters of an inch with only two shots hitting just a little outside of this. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol was shooting a bit low for me but that can be easily corrected by adjusting the the internal hop-up to raise the shot placement up as required.
The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol has a somewhat relaxed blowback but has plenty to give some recoil feel. You will get at least a full 27 round magazines worth of shots from each gas fill, perhaps even two if you stretch out your shooting a bit.
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: GPM92 Materials: Metal slide & frame. Weight: 2.24 pounds (1016 grams). Length: 8.9 inches total Barrel: 4.6 inches,Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 27 rounds. FPS: 350+ fps.
Trigger Pull: The trigger pull on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is very good in both single and double action. Double action is a bit longer but not that much heavier when shooting in single action. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol but I did get the chance to shot it quickly in my Sea Can indoor shooting range. Blowback felt good and accuracy seemed tight even though I was shooting free hand. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol shot just a little bit low but I can adjust the hop-up slightly to account for it.
Build Quality: Like pretty much all G&G Airsoft guns, the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol build quality is right inline. Fit and finish where excellent and a lot of attention to detail was seen all over this Replica Airsoft Pistol. There is also some new gas valve technology from G&G that should significantly help with freezing in colder or fast shooting situations.
Realism: The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is an excellent replica of the real steel Beretta Mod. 92FS, the safety even acts as a working decocker. You'll also find 5, 10, and 15 numbered markings on the backside of the magazine that would normally indicate how many bullets are in the magazine, a nice touch for sure! Everything works pretty much the same as it would on a real Beretta M9 including the ability to fully field strip the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol.
Whirl Cylinder Valve system should expect to get decent amounts of shots per gas fill.
White dot sights front and back.
Comes with hard shell case.
Very detailed full size drop out metal magazine.
20mm rail for accessories.
Comes with high quality speed loader.
Safety also works as a decocker.
Threaded removable barrel tip for add on mock suppressor.
Cons:
Sights are non adjustable.
A little bit more expensive than some other Beretta M92 full blowback Airsoft pistols
Barrel opening not as recessed as much as a real 9mm would be.
Comments:
I would have to say the G&G GPM92 is one of the nicest Beretta Model 92FS Airsoft Pistols you are going to find out there. There is a ton of attention to detail for sure, You also get the hard shell case with included high quality speed loader and G&G's new Advanced Safety Release Valve and Revolutionary Whirl Cylinder Valve that help with freeze-up issues. You might pay just a smidgen more that some other similar Blowback Beretta M92's out there but I feel it is well worth it.
My Vimeo Table Top Review of the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol:
I just received some really nice G& G Airsoft guns to share with everyone, I have two CQB Styled AEG rifles and a fantastic Gas Blowback Beretta Mod. 92FS.
The AEG CQB AR or M4 styled rifles are similar in a lot of ways and are super compact and really well built. The G&G ARP-9 has a polymer receiver and hand guard while the G&G ARP-556 has a full metal receiver and hand guard. Both have good weight to them. You will also find Skeletonized PDW stocks and large crown flash hiders on both models along with M-LOK hand guards. Inside you will find upgraded ETU and MOSFET electronics.
Obvious difference are the 9mm style magazine found on the G&G ARP-9 versus the M4 styled high capacity magazine on the G&G ARP-556. You also get an ambidextrous safety sector switch on the G&G ARP-556.
Next I show off the G&G GPM92 Beretta Mod. 92FS Gas Blowback Airsoft Pistol. It comes in a high quality hard plastic case with a well made speed loader. If you place the magazine in the gun you will have room for two magazine in the hard shell case. The G&G GPM92 hold 27 roads in it's double stack magazine that has some interesting new features that help it perform much beet in cold environments and really boost green gas usage. G& G calls them the Whirl Cylinder Valve system and Micro gas filter. Both help eliminate free up in the gun when shooting fast.
The G&G GPM92 Beretta Mod. 92FS is really well made and shoot in double and single action and the safety even works as a decocker. For those looking to add a mock suppressor you will happy to know the G&G GPM92 has a threaded barrel tip.
In this Classic Legends Airguns comparison video I look at a number of different Classic or Legendary BB Airguns and compare them to each other to determine which one I personally feel is the best . My final choices are of course based on my own personal opinion and in this video I end up picking two as they where kind of each in their own class.
In this Makarov comparison video I look at a variety of different versions of Makarov BB Airguns and compare them to each other to determine which one I feel is the best in their class. My final choice is of course based on my own personal opinion and even then I found it hard to pick a clear winner.
In this Revolver comparison video I look at a variety of different types of Revolver Airguns and compare them to each other to determine which one I feel is the best Revolver styled Airgun. My final choice is of course based on my own personal opinion.
In this comparison video I look at a variety of different Sig Sauer P226 Airguns and compare them to each other to determine which one I feel is the best Sig Sauer styled Airgun. Of course my choice may not be your choice :)
In this comparison video I look at a variety of different Beretta 92/Taurus PT92 Airguns and compare them to each other to determine which one I feel is the best Beretta/Taurus Airgun. Keep in mind what's best in for me may not be best for you.
In this comparison video I look at a variety of different 1911 Airguns and compare them to each other to determine which one I feel is the best 1911 Airgun, well at least for me.
Type: Break barrel pellet rifle. Manufacturer: Umarex USA. Model:Ruger Explorer. Materials: Metal and polymer parts. Weight: 4.45 pounds (2.5 kg). Barrel: 12 inches, metal rifled. Propulsion: Spring piston. Action: Single shot. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1. FPS: 495.
Trigger Pull: I found the Ruger Explorer Youth Break Barrel Pellet Rifle to have a fairly light trigger, there is some initial take up with a smooth almost undetectable break or release point, I found that as I shot the Ruger Explorer Youth Break Barrel Pellet Rifle the trigger seemed to be breaking in a bit which made it a bit hard to figure exactly when the trigger was going to release but I feel over time and once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in the trigger will become more predictable.
Accuracy: Since I have already made a shooting or field test video for the Ruger Explorer Youth Break Barrel Pellet Rifle, I can comment on its performance n this review! With 6 grain lead pellets (on the lighter side), I was able to get a 5 shot Chronograph average velocity of 485 fps. Using heavier 7-8 grain pellets the velocity slowed down a bit to around 400 fps. In terms of accuracy the Ruger Explorer Youth Break Barrel Pellet Rifle performed well getting about a 1 inch 10 shot grouping on my paper target setup 30 feet down range. I know the Ruger Explorer Youth Break Barrel Pellet Rifle can do better than this once the trigger settles down a bit since some shots went off unexpectedly.
Build Quality: The Ruger Explorer Youth Break Barrel Pellet Rifle is not an expensive air rifle and is more or less an entry level spring piston pellet shooter. That said it is built fairly well with a metal receiver, barrel and trigger setup. The modern looking stock is polymer and the steel barrel is coated in a synthetic soft plastic to help with long term durability. The real fiber optic sight is plastic so you will have to be careful with it as it does protrude a bit from the air rifle.
Realism: Since the Ruger Explorer Youth Break Barrel Pellet Rifle is not a replica realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.
Pros:
Really great looking air rifle with a modern look to it.
Finish is very durable with its polymer stock and plastic/rubber coated barrel.
Fully adjustable fiber optic sights are easy to sight in and use.
Receiver is notched for ring mounts so you can add an optical sight or red dot to it.
Trigger is fairly light, just need some break in time with it.
Cocking effort is fairly easy at 16.5 pounds.
Great size gun for all ages.
Power and accuracy were good for an entry level air rifle.
Cons:
I did find the trigger break/release point to be a bit unpredictable but I feel this is a break-in issue and will become more consistent over time.
You have to remember to push that safety in with ever shot.
Comments: The Ruger Explorer Youth Break Barrel Pellet Rifle is marketed as a Youth air rifle but in reality it would be great fun for all ages. I am a fairly large person at 6 feet tall and I had no problem dealing with the slightly shorter configuration. The trigger guard is nice and open and allows for large fingers which is not always the case with airguns designed for smaller individuals. The overall quality you get with the Ruger Explorer Youth Break Barrel Pellet Rifle for the lower entry level price tag is very good and in terms of performance I feel you for sure get your monies worth with the Ruger Explorer Youth Break Barrel Pellet Rifle.
I don't do a lot of Springer (Spring Piston) Air Rifle shooting tests or even reviews for that matter. Mainly for a couple of reasons: Number 1, my content is mostly focused around Replica style Airguns and Number 2, it's kind of hard to test out the longer range airguns in my 30 foot airgun range. That said I felt the Ruger Explorer Youth Break Barrel Pellet Rifle would be a really great airgun to review since it is both affordable and even though it is targeted for the youth market, it really does make a great shooter for all ages.
I have not done a Table Top Review for the Ruger Explorer Youth Break Barrel Pellet Rifle but plan to shortly so stay posted for more detailed info on the Ruger Explorer Youth Break Barrel Pellet Rifle down the road in that review.
So how'd we do during my Field Test Shooting Video for the Ruger Explorer Youth Break Barrel Pellet Rifle? Not bad I would say! Using about 6 grain rather light weight .177 caliber lead pellets I was able to get really close to the 500 fps claimed fps mark coming in just under at a 5 shot testing average of 485 fps. I did put a couple heavier grain pellets through my Chrony Chronograph and got closer to the 400 fps mark, still not bad for this lighter sprung spring piston air rifle.
In terms of accuracy, shooting at my paper target setup 30 feet down range in my Sea Can Airgun Range, I shot about a 1 inch 10 shot grouping. I was finding the trigger break-in to be a bit unpredictable during this testing which led to some premature shots going off so I do feel once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in and me getting use to the trigger break, I should be able to improve on this result.
Overall the Ruger Explorer Youth Break Barrel Pellet Rifle is a really nice entry level airgun perfect for all ages and not just the youth market. It looks really cool, is easy to cock and has a very resilient finish. Oh ya it shoots pretty good to!
