Type: BB Pistol/Rifle. Manufacturer: Crosman. Model: A4-P. Materials: Metal & plastic. Weight: 5.3 pounds (2.4 kilograms). Length: 21.2 inches. Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - Semi & full auto, single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 rounds. FPS: 430fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman A4-P CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The real fun happens with the Crosman A4-P CO2 Blowback BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in mere seconds. You may want to pickup the Crosman High Capacity magazine if you plan on doing a lot fo full auto shooting!
Accuracy: I have not made my Field Test Shooting Video just yet but you can checkout my Field Test Shooting Video for the Crosman R1 CO2 Blowback BB Machine Gun which is a very similar product to the Crosman A4-P CO2 Blowback BB Machine Gun. I test out the Crosman R1 CO2 Blowback BB Machine Gun using my Chronograph where I get an average of 385 fps and a nice 30 foot grouping of right around 1 inch in semi out and a decently tight full auto group of about 3-4 inches. We should expect about the same with the Crosman A4-P CO2 Blowback BB Machine Gun as long as not being able to shoulder it is a big factor?
Build Quality: The Crosman A4-P CO2 Blowback BB Machine Gun is well made all around just like the rest of the Crosman AR series of BB Machine Guns. Weighing in at 5.3 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman A4-P CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real AR / M4 other than the forward assist which is moulded into the receiver. Keep in mind this is the pistol version but like other AR styled “Pistols” the buffer tube area is still required to make the action work.
Pros:
Super realistic working M4/AR 4.5mm BB Rifle just like the other Crosman Rifles in this lineup.
Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.
Great weight and feel to it.
Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch).
Duel CO2 metal drop out magazine that holds the 25 4.5mm steel BB’s as well as the dual CO2.
Compact maneuverable pistol version but may be able to add an AR butt stock if you want?
Included red dot sight and ability to add pop-up iron sights.
Lots of rails for mounting additional cool hardware.
Removable flash hider.
Works with Crosman High Capacity magazine.
Cons:
Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.
No iron sights included.
No but stock included.
Comments:
The Crosman A4-P CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR and Crosman MPW and Crosman R1 CO2 Blowback BB Machine Gun with more or less Cosmetic changes, most notably being the lack of a butt stock and being more of the pistol version. Like the otters Crosman AR products, the Crosman A4-P CO2 Blowback BB Machine Gun has an AR compatible pistol grip, adn like the Crosman R1 CO2 Blowback BB Machine Gun you also have the ability to change out the flash hider, you can even put a mock suppression on in it if you choose to. No matter which of the Crosman AR Full Auto CO2 BB Rifles you chooses to get they are mechanically every similar and share most of the same parts. If you want the most compact version than the Crosman A4-P CO2 Blowback BB Machine Gun is the way to go!
My Table Top Video of the Crosman A4-P CO2 Blowback BB Machine Gun:
In this Field Test Shooting Video I put some .20 gram Airsoft BB’s through the Action Army AAP-01 GBB Airsoft Pistol to see what the actual velocity is compared to the claimed fps. I also put 10 rounds into a paper target setup 30 feet downrange to find out just how accurate and what kind of grouping I can get from this Gas Blowback Airsoft pistol and also do a full mag dump! If you have not already watched my Table Top Review for the Action Army AAP-01 GBB Airsoft Pistol then make sure to watch if for more specifications and details along with some nice close up video.
For my Chronograph test I placed 5 rounds through my Chrony using .20 gram plastic Airsoft BB’s and was able to average 314 fps with the short barrel and 385 fps with the longer barrel extension added. I was surprised with the addition 70 fps just by adding an extra 4 inches or so to the barrel.
For the accuracy portion of my Field test Shooting Video for the Action Army AAP-01 GBB Airsoft Pistol, I ended up first placing 10 rounds into a fresh paper target setup 30 feet down range. I was using my standard seated and rested shooting position which does offer a fairly stable shooting platform but not without some degree of human interaction. I was a little bit disappointed in the grouping I got as it was one of the larger groupings I have gotten for a test like this spreading out to at least 5-6 inches, still perfectly fine shooting at human target 30-40 feet away. I then uploaded up a full magazine with BB’s and gas and did a mag dump on the same target. As expected there was a lot fo gas and a lot ammo spraying everywhere but the Action Army AAP-01 GBB Airsoft Pistol did make it through the full 22 rounds and get at least some of them on the target.
The Action Army AAP-01 GBB Airsoft Pistol may not be the most accurate GBB Airsoft Pistol out of the box but does offer both semi and full auto and at the end of the day when using this Airsoft Pistol in an actual game situation the accuracy will be not as important since your target will generally be a human torso which is much larger than the 5-6 inch grouping I got. I’m not sure how useful the full auto feature really is in a real world situation but it sure is fun and maybe if you pair up a higher capacity G-series magazine this compact full auto pistol could work as a nice min machine gun!
In this Field Test Shooting Video I put some lead pellets through the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol to see what the real world velocity is compared to the claimed fps. I also put 7 rounds into a paper target setup 30 feet downrange to find out just how accurate and what kind of grouping I can get from this compact spring piston replica air pistol! If you have not already watched my Table Top Review for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol then make sure to watch if for more specifications and details along with some nice close up video.
For my Chronograph test I placed 5 rounds through my Chrony using 8.18 grain Sig Sauer Match Precision Wadcutter Lead Pellets and was able to average 312 fps so just shy of the claimed 320 fps but there are lighter lead pellets out there and even lighter alloy pellets so higher fps can be achieved with this Air Pistol if you plan on using lighter pellets.
For the accuracy portion of my Field test Shooting Video for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol, I ended up placing 7 rounds into a fresh paper target setup 30 feet down range. I was using my standard seated and rested shooting position which does offer a fairly stable shooting platform but not without some degree of human interaction. I was a little bit disappointed in the 2 inch grouping I got, I was expecting closer to a 1 inch group but I would have had to have been on my game and maybe today I was not. Pellet choice can also effect accuracy for sure and so maybe a different pellet would have performed better in this test. Most of the variable was up and down not left to right with only about an inch side to side.
All in all the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol did a good job hitting velocities as claimed and producing a decent grouping that I feel I could have improved upon once I got use to the lighter firmer trigger than I would like to see on a Ruger Mark IV Replica to match the real steal one more closely. Shot placement out of the box was close to the bullseye, it just needed to move up a bit and a tad to the right but once the sights are adjustable for windage and elevation this is easily fixed with a few turns of the sighting screws. If you are a Ruger 22LR owner than I would suggest you buy one of these Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistols and shoot for even less cost per shot and in more locations since this Air Pistol is super quiet and most makeshift backstops will work with it just fine.
Type: Airsoft Pistol. Distributer: Action Army. Model:Action Army AAP-01. Materials: Metal and polymer build. Weight: 1.43 pounds (648 grams). Barrel: 5/9.25 inches. Total Length: 9 inches. Propulsion: Gas Blowback. Action: SAO. Ammunition Type: .6mm Airsoft BB’s Ammunition Capacity: 22 rounds. FPS: 360.
Trigger Pull: The trigger pull on the Action Army AAP-01 GBB Airsoft Pistol is fairly light, it is a single action only trigger meaning you will need to pull the bolt back to engage the trigger and load an Airsoft BB into the breach. I noticed there is about a 1/4 inch of take-up with a firm breakpoint and easy trigger release. You will also notice there is a trigger safety on the trigger but it does not get in the way at all.
Accuracy: I have not had the chance to really test out this Airsoft Pistol but will be doing so next week when I make my Field Test Shooting Video for the Action Army AAP-01 GBB Airsoft Pistol. I did load up a magazine with propane and do a mag dump in full auto and managed to get though it all but I did pretty much use up all the Gas shooting in full auto. I am sure when in semi auto the gas will go a lot further. I look forward to seeing how it performs in the Filed test in term of accuracy and velocity.
Build Quality: The Action Army AAP-01 GBB Airsoft Pistolhas a good overall build quality and fit and finish. There is a lot of plastic on the outside but good use of metal internally in the bolt, barrel and magazine giving it decent weight but not making it too heavy.
Realism: The Action Army AAP-01 GBB Airsoft Pistol is not an actual Replica specifically of any one particular real steel gun in production, that said it does resemble the Ruger series of 22LR pistols in design and how the bolt functions. You will finds lots of working parts that function as you would expect to them if this was a powder burner. Like the bolt, slide catch, magazine release, safety, trigger safety and full size drop put metal magazine. You can even field strip this gun easily.
Pros:
Full Blowback operation.
Full size dropout G-series metal magazine .
Fiber optic front and back sights.
Can mount rails on top and bottom (not included).
Comes with short and long barrels.
Has a 14mm threaded barrel which can be used to add a mock suppressor to hide the barrel extension.
Working trigger safety and added cross bolt safety.
Mostly everything is ambidextrous.
Can be used in semi auto or full auto mode with the flick of a switch hidden under the bolt.
Overall a nice looking custom Airsoft Pistol!
Cons:
Rear sight not adjustable.
May be hard to find a holster for it.
Seems to eat a lot of gas especially in full auto mode.
Comments: What I really like about the Action Army AAP-01 GBB Airsoft Pistol is that it is rather unique looking, it looks nothing like a Glock, or 1911, or a Beretta or Sig so if you want something that stands out from the crowd then this may be it. I also like the ability to shoot in semi auto or full auto with the click of a switch and since it uses standard G-series magazines you should be able to easily find higher capacity extended mags that hold more gas and more Airsoft BB’s which you will for sure need if you plan to be shooting this one in full auto often.
My Vimeo Table Top Review Videos for the Action Army AAP-01 GBB Airsoft Pistol:
Type: Pellet Pistol. Distributer:Umarex. Model:Ruger Mark IV. Materials: Metal and polymer build. Weight: 1.56 pounds (708 grams). Barrel: 5.3 inches (135mm). Total Length: 11 inches (279mm). Propulsion: Spring Piston. Action: SAO Break Barrel. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1 round. FPS: 320+.
Trigger Pull: The trigger pull on the Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.
Accuracy: I have not had the chance to really test fire this pellet pistol but will be doing so next week when I make my Field Test Shooting Video for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol. If it is anything like the Umarex Buck Mark URX which I imagine it will be, then I am expecting to get some good accuracy as the URX was able to get a nice under 1 inch shot grouping when I tested it a few years back. Velocity I am expecting to be up and over 300 fps even using lead pellets, I am hoping it will be in the mid 300’s
Build Quality: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistolis a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?
Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.
Pros:
It's a decent Ruger Mark IV Replica!
Feels well built overall.
Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.
Barrel locks into place much better than the Umarex Browning Buck Mark URX did.
Fully adjustable rear sight with fiber optic front sight.
Auto locking safety, just don’t forget to unlock before each shot
Actual metal trigger in this version.
Nice and compact, not too heavy.
Full Ruger licensed via Umarex.
Fairly low price tag.
Cons:
No built in rail for a sight system like the Umarex Browning Buck Mark URX but this is tru for the Hunter version.
Trigger pull could be lighter to match the real steel version.
A bit more metal would have been nice to get the weigth up closer to the real steel version.
Comments: I remember the Umarex Buck Mark URX being a super fun pellet pistol to shoot even though it is only a single shot airgun. Sometimes just getting back to the basics and taking your time to really place your shots and see how accurate you can be is more fun than spraying BB’s and pellets rapid fire and hoping you hit something. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is inexpensive to buy and inexpensive to shoot, no CO2, just a tin of your favorite pellets and you will get hours of fun for it while honing your shooting skills. And at the end of the day the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not a bad Replica Airgun if you are a collector of shot guns.
My Vimeo Table Top Review Videos for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol:
In this Preview Unboxing Vimeo Video I take a look at five very different products! A Spring Piston .177 Caliber Pellet Pistol, an Airsoft GBB Pistol, a Compact Crossbow, a full auto CO2 Blowback BB Pistol and a PPC .22 Caliber Pellet Rifle.
First up is the Umarex Ruger Mark IV Spring Piston Pellet Pistol which is a single shot replica pellet pistol that shoots .177 caliber pellets at up to 320 fps using a spring piston break barrel system. The Umarex Ruger Mark IV Spring Piston Pellet Pistol is a target plinker with fully adjustable fiber optic sights and should be a lot of fun to shoot!
Next I take a look at a Gas Blowback Airsoft Pistol from Action Army that closely resembles the Ruger Mark IV pistol with perhaps a more compact look. The Action Army AAP-01 GBB Airsoft Pistol is full blowback a full size drop out magazine and fiber optic sights. It also come with a threaded barrel and barrel extension for adding a longer barrel and much suppressor.
Next on my list of new items is the Bear X Desire XL Crossbow which is a 2.2 pound compact bolt shooting crossbow that sports a rail system with included adjustable iron sights that also allow for a red dot if you want to really customize it. The Bear X Desire XL Crossbow has a 60 pound draw and shoots arrows/bolts at up to 175 fps.
Another AR BB Rifle/Pistol from Crosman is the Crosman A4-P Full Auto CO2 BB Pistol which is essentially a pistol version of the AR Platform. If you like the Crosman DPMS SBR, R1, PDW then you will probably also like the Crosman AP-4. Like the others it uses dual CO2’s and shoots 4.5mm Steel BB;s in semi or full auto at 1400 rounds per minute until the 25 round magazine is empty.
Last included in this preview video is the Air Venturi Avenger Regulated PCP Pellet Rifle. I’m a bit uncertain about this one as I am pretty sure it is the non detuned PAL version that requires a firearms license here in Canada as it shoots at full velocity (.22 caliber pellet at 950 fps). If that’s the case then it will not be available in our Canada Replica Airguns Store but may be available in the US Replica Airguns Store. If it is the detuned version or a detuned version becomes available in Canada then I imagine we will at some point have it in the Canada replica Airguns Store. That said the Air Venturi Avenger Regulated PCP Pellet Rifle uses compressed air and shoots either .177. .22 or .25 caliber pellets using a latch system and rotary magazine.
Back in 2017 I made “Which Beretta Airgun is the Best” Video and showed off some 4.5mm Steel BB and .177 Caliber Pellet versions of my favorite Beretta 92 - M9 style Air Pistols. There have been some changes since then most noticeably the addition to Airsoft versions so I thought I would update this video with more current Beretta Airguns along with of course some of the same ones form my last video.
Because I show off 4.5mm Steel BB, .177 Caliber Pellet and 6mm Plastic Airsoft versions I decided to pick my favorites form each category. Watch my Vimeo Review Comparison Video so checkout these Air Pistols and see which ones are my favorites…
.177 Caliber Pellet Beretta 92 -M9 CO2 Air Pistols
In this Table Top Comparison Vimeo Video I take a look at the full line of Sig Sauer distributed Replica CO2 Blowback Airguns and pick out my favorite 4.5mm Steel BB and .177 Caliber Pellet shooters out of the bunch. You will have to watch the video to see what my two picks are!
In this Vimeo Comparison Review Video I take a look at a selection of Glock CO2 4.5mm Steel BB Pistols, four from Umarex and 1 from KWC. I go over some of the similarities and differences of each of them and ultimately decide which one is my personal favorite out of the bunch based on what I generally look for in an Airgun.
Type: Airsoft AEG. Distributer:ASG. Model: CZ Scorpion EVO 3 A1. Materials: Metal and polymer build. Weight: 5.3 pounds (2400 grams). Barrel: 208mm (8.2 inches) Total Length: 425-623mm (16.7-24.5 inches). Propulsion: AEG. Action: Semi, burst, full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 75 rounds. FPS: 395.
Trigger Pull: The trigger pull on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is essentially just an on off electric switch controlled by the ECU. There is very little trigger resistance and the take up is very short allowing for quick semi auto shooting but if you like you can easily select three round burst or full auto shooting for more intense situations.
Accuracy: I have not performed my Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but plan to get to that video next week. I really have no idea what to expect at this point since i have not even loaded up a magazine and taken it for a spin yet. I am sure I will not be dissapoitned as this is a very high quality Airsoft Gun with great internals.
Build Quality: I remember at SHOT Show back when ASG introduced the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I was told indirectly that the construction was nearly identical to the real steel CZ Scorpion EVO at least cosmetically as all the internal parts will be specificities to Airsoft. That said this is a very high quality build with the material being for the most part the same as the original with Nylon Fiber PA6 Polymer reenforced plastics and even some CNC machined metal parts as in the outer barrel, flash hidden, barrel nut and even the gear box.
Realism: The ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is a bang on replica in terms of emulating the real steel CZ Scorpion EVO and has our weight and feel including a blot catch that locks back when out of ammo and most working components being ambidextrous.
Pros:
Build quality is almost exactly like the real steel version, super high quality materials.
Three shooting modes: semi auto, burst mode and full auto.
Decent mid capacity 75 round magazine with auto empty detection which locks the bolt catch.
Quad rail for lots of add on accessories.
Folding and adjustable stock that can also be removed.
Adjustable and removable iron sights with fiber optic up front and peep in the back.
Working charging handle for easy access to hop-up
Working bolt catch.
High quality electronic and gear box.
Ambidextrous controls for the most part.
Scorpion licensed through ASG.
Orange tip is fairly discreet.
Cons:
Battery compartment is small and hard for quick battery replacement, I recommend using an external setup if possible.
Price point is on the higher side but you get what you pay for.
Comments: On paper and just by looking over and inspecting the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun specs out and I am sure I will be pleased when I test it out in the Replica Airguns Indoor Shooting Range. That said this hasn’t happened yet so I will leave my final thumbs up until then. I do wish we had them in stock at the time of this video but there are a lot of other great ASG products in our store and of course many more brands of AEG Airsoft Guns. Hopefully we can get something like this in shortly for everyone so keep checking with us.
My Vimeo Table Top Review Videos for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun:
In this Field Test Shooting Video I put the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun through it’s paces by first testing out the velocity placing several rounds through my Chronograph, and then I setup a paper target downrange and place 10 rounds into it to see how tight of a grouping I can get. If you have not already watched my Table Top Video for this Airsoft Sniper Pistol/Rifle then make sure to do so for more details, specifications and close up video.
Starting off with my real world velocity test for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun, I decided to use .28 gram Airsoft BB’s for this entire Field test Shooting video so I was expecting to get somewhere between 20-25% slower fps velocity as compared to the standard tested .20 gram Airsoft BB’s. After placing around 6 shots through my Chronograph I averaged 328 fps which ended up being 18% slower than the claimed 400 fps made by ASG. I would image if I had used .20 gram Airsoft BB’s I may have even exceeded 400 fps.
Moving on to the accuracy portion of my Indoor Field Test here in the Replica Airguns Sea Can, as always I placed a fresh paper target 30 feet downrange and proceeded to shoot 10 rounds into it from a rested and seated shooting position to allow for best possible results with as little human factor added in. I was using a 4x optical scope since the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun does not come with any type of sighting system included so I did have to sight it in initially. I did manage to get a nice 1.5 inch grouping fairly close to the bullseye but I did notice that if I angled the barrel down a bit, BB’s would roll out of the barrel which made me wonder if the hop-up was set high enough to engage a BB.
So I did my second test with the hop-up set in the middle range and this time BB’s did not fall out of the barrel when angled down. After the hop-up adjustment I did notice I was shooting a bit higher which is expected with more hop-up adjustment so if you are experiencing BB’s falling out of the barrel then make sure to adjust your hop-up a bit tighter.
All in all the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun performed very well for me especially once I got the hop-up figured out. And I do think it makes for a really nice compact Sniper Rifle if bulkiness is a factor for you, if not then checkout the Rifle version of this gun with the more traditional but-stock and longer barrel.
Type: Airsoft Rifle. Distributer:ASG. Model:Action Army T-11. Materials: Metal and polymer build. Weight: 3.9/4.5 pounds. Barrel: 11.8 inches, non-rifled. Total Length: 34.7/43.3 inches Propulsion: Spring Action: Bolt action repeater. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 50 round magazine. FPS: 400-430. Type: Pistol and Rifle versions.
Trigger Pull: The trigger pull on ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is light, short and crisp. There is virtually no take-up and the release point has no creep to it. I would say it is not too light but for sure one of the lighter trigger s I have tested on a Airsoft rifle.
Accuracy: I have not performed my Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun so stay posted for that. ASG claims around 400-430 fps velocity depending on the version which is kind of weird since both have the exact same barrel length internally and I would assume both use the same mechanical part throughout? I don’t have the rifle version to compare to but I will for sure test the velocity using my Chronograph for the pistol version when I do my Field Test Shooting Review along with accuracy performance.
Build Quality: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is well built for sure, it feels really solid in the hadn't and has good overall weigth to it for it’s size. You will find lots of metal parts where they need to be as in the inner and outer barrel, receiver, bolt, trigger, magazine release and I am sure most mechanical internal parts. Fit and finish is also very good.
Realism: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is not a replace of any gun I know of but does have tab least the pistol version does look like a sawn off shotgun more than a sniper rifle. The gun overall all is very modern and ergonomic looking but in terms of being a replica of any specific real steel gun in production I don’t know of any it would resemble?
Pros:
Top and bottom rails for lots of accessory add on options.
Can swap over to a rifle version by adding on an interchangeable but-stock.
Mock magazine allows for storage and transport of tools plus extras.
Safety switch is in a great location for right handed shooters.
Comes with included hand stop.
Solid construction with lots of metal parts where they are important.
Ability to add side rails.
Great option if you are looking for a more compact sniper rifle.
Comes in Pistol and Rifle versions.
Cons:
Has an orange tip.
Does not come with sights, will need to add some sort of optical or red dot sight.
Does not come with speed loader, would have been nice.
Comments: I am looking forward to performing my Indoor Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun. I won’t be able to test it out perhaps as far range as I would like to since I will be shooting it in the Replica Airguns Indoor Shooting range which allows me to test at 30 feet. That should give us a good overall idea on at least what it may be capable of since if we can get a tight group at 30 feet we should also be able to get a tight group at longer ranges with proper hop-up and BB selection. I like the option of being able to choose either the Pistol or Rifle version and both should perform about the same. Having the Pistol version will allow for a much more compact Sniper Rifle option much better suited for shooting in a variety of situations.
My Vimeo Videos for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun:
In this Replica Airguns Vimeo Field Test Shooting Video I put the KWC / Umarex Mod. 92 A1 andElite Force 1911 TAC CO2 Blowback Airsoft Pistols through my Indoor Sea Can Shooting Test. Fist I find out what the real world velocity is by placing 5 rounds through my Chronograph and average out the FPS. I then shoot 10 rounds on a paper target for 30 feet back using a semi rested shooting position, sand bag up front and seated in the back.
Starting with my velocity test for both CO2 Blowback Airsoft Pistols I made sure to use a brand new CO2 along with .25 gram Airsoft BB’s so a bit heavier than what was used for the official stats. Both Umarex Airsoft Pistols shot really similar velocities with the Umarex Beretta Mod. 92 A1 averaging 364 FPS and the Umarex Elite Force 1911 TAC averaging 365 FPS. If I had been using .20 gram Airsoft BB’s I am sure these numbers would have been closer to the claimed 400 or so FPS.
Moving on to the accuracy test again I performed this test which each Umarex CO2 Blowback Airsoft Pistol. The Umarex Beretta Mod. 92 A1 performed a little bit better than the 1911 with all 10 shots grouping within 1.5 inches and very well centered on the target. The Umarex Elite Force 1911 TAC did have a slightly wider grouping closer to 2 inches and was a lilt bit high on the target but center nicely left to right. Of course the full auto mode on the Umarex Beretta Mod. 92 A1 did not produce anything even close to a tight group but it is always fun shooting in full auto :)
All in all both of these KWC / Umarex CO2 Blowback Airsoft Pistols performed well for me in terms of meeting their expectations for velocity and accuracy. We have them in our online Replica Airguns Stores in either KWC Unlicensed or Umarex Licensed versions so take your pick!
In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns.
The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available…
Next up from Umarex is the fully licensed Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol, this product is distributed by Umarex but is made by KWC. Another solid metal pistol with a hefty 2.4 pound weigth that holds 21 rounds in its full size drop out metal magazine and offers both semi and full auto shooting at the flick of a switch!
Again from Umarex I showcase the Elite Force 1911 Tac CO2 Blowback Airsoft Pistol and like the Beretta Pietro it too is made in the KWC factory for Umarex. The 1911 Tac as the name suggest is a tactical version of the standard Colt 1911 but with some upgrades like a skeletonized hammer and trigger along with an ambidextrous safety, white dot sights front and back and a picatinny rail on the frame for add ons. You can expect velocity to be somewhere in the 400 fps range and the full size drop out metal magazine holds 15 Airsoft BB’s.
Type: BB Air pistol. Distributer: Crosman. Model:MAKO. Materials: Metal and polymer build. Weight: 1.71 pounds (775 grams). Barrel: 6 inches, non-rifled. Total Length: 8.6 inches Propulsion: CO2 x1. Action: Semi auto blowback, double action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 20 rounds. FPS: 425.
Trigger Pull: The trigger pull on the Crosman MAKO Blowback CO2 BB Pistol is a little on the heavy side since it is double action only and it is also longer again being double action only. That said it is fairly smooth and not super heavy which shoudl allow for decent action shooting. It would have been cane if the hammer could be engaged for single action shooting but the design of the Crosman MAKO Blowback CO2 BB Pistol does not allow for this and therefore the hammer is just for show in this case.
Accuracy: I have performed my Field Test Shooting Video for the Crosman MAKO Blowback CO2 BB Pistol which can be found here. I won’t get into too much detail but overall you can expect velocity to be in the 400 fps range with a brand new CO2 and accuracy was decent form 30 feet away but could be a bit tighter. I was surprised at how snappy the blowback action was for a light weight slide with a light spring in it.
Build Quality: The Crosman MAKO Blowback CO2 BB Pistol feels solid enough in the hand and the materials used I am sure are on par with most Airguns out there but the gun may come across as being on the cheaper side as it lacks some of the more full features of more realistic functioning blowback Airguns. Just don’t let that make you think it is not well made as it is well made and may even be more reliable over time..
Realism: The Crosman MAKO Blowback CO2 BB Pistol looks the part of a beretta M92 at first glance but when you get a little closer you can really tell it is an Airgun at heart which is not a bad thing since that’s exactly what it is. You will find working parts like the magazine release and slide catch release and the slide does function since it is a blowback Airguns but the Crosman MAKO Blowback CO2 BB Pistol does have that funny inner barrel that pops out of the front every time you pull the trigger and parts like the slide safety are moulded into the slide and the hammer is just for show.
Pros:
Fairly inexpensive.
High FPS rating for a blowback BB pistol.
Easy to see Fiber Optic front and rear sights.
Multi tone color scheme looks good.
Has a pleasing tactic look to it.
CO2 tab is nicely hidden inside grip under magazine but plate.
Double action trigger pull is long but not too firm.
Picatinny rail for adding accessories.
Notched grips for a firm hold (best for larger hands)
Has a working side catch release that locks back after the last shot.
Has a surprising decent blowback action to it.
Cons:
Slide action feels clanky.
Hammer is just for show, does not do anything, no single action shooting ability.
Grips are large and will be to bog for smaller hands.
Comments: All in all the Crosman MAKO Blowback CO2 BB Pistol is a fun inexpensive CO2 Blowback BB Pistol that surprised me a bit when I actual got to shoot it. I originally though ti would feel kind of cheap to shoot but the snappy and firm blowback action and higher fps than usually found on blowback Airguns was surprising! The fiber optic sights making lining up target super easy and for a double action only shooter the trigger is not too bad so if you're a Beretta and Crosman fan then perhaps this is the pistol for you.
My Vimeo Video for the Crosman MAKO Blowback CO2 BB Pistol:
In this Field Test Review Video I test out the performance of the Crosman MAKO Blowback CO2 BB Pistol to see what the real world velocity and accuracy is for this Crosman Blowback BB Pistol. Crosman States 425 fps which is fairly high for a Blowback Airgun so we’ll see if I can get close to it!
Starting with my Velocity Test, I place 5 rounds through my Chronograph using a brand new CO2 with Daisy Zinc coated 5.1 grain Steel BB’s and averaged 390 fps withy the fastest shot hitting 403 fps and the slowest shot going down to 384 fps. It was not super warm in the sea can so I imagine with a bit warmer temperature this number would have been a little bit higher, maybe just up and over 400 which is still impressive for a blowback BB Pistol.
Moving on to my accuracy test, I placed 11 shots (meant to shoot 10) on a fresh paper target 30 feet down range and was able to get all shots within about a 3 inch grouping slightly low and to the left of the bullseye but not far off. I was shooting from a seated position with my hands resting on a sand bag for stability but of course some human factor is involved here.
Overall the Crosman MAKO Blowback CO2 BB Pistol performed decent for a fairly low cost and basic Blowback Airgun. The Blowback action is crisp with a long but not super heavy trigger. I like the fiber optic sights that make lining targets up super easy on virtually any background you are shooting on. This Airgun does have a large grip so keep that in mind if you have smaller hands but other than that it is a really fun Airguns to shoot!
In this video I test out the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol to see what we can expect in terms of accuracy and velocity. I first shoot several rounds through my Chronograph to get an average fps fooled by an accuracy test where I shoot 10 rounds at a paper target setup 30 feet down range to see how tight of a grouping I can get and if the Airgun out of the box shoots relatively on target.
Starting with my Velocity Test I shot about 9 rounds through my Chronograph to get a 6 shot average using a brand new CO2. The first three shots seemed to be a bit low as the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol is brand new and this was probably the CO2 valve settling in a bit. After the first three shots all the rest of the shots where in the 350-360 fps ranges with an average of 359 fps, fairly close to the Umarex 375 claimed fps on the packaging.
Next I setup a brand new paper target 30 feet down range and placed 10 rounds carefully on it from a seated and rested shooting position. I was able to get close to a two inch grouping that was a bit to the left of the bullseye but well centered vertically. The sights are not adjustable so at least with this gun I would need to aim juts a little bit to the right to nail targets consistently.
Overall I am impressed with the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol, the fps was right in the ballpark giving better performance than most full blowback BB guns which will ams translate to more shots per CO2. The accuracy was also on point, it just would be nice if some of these lower coat airguns had adjustable sights to get them dead canter. I did find the trigger to be better than expected, it is a bit long as the first part of the trigger is used to shutle a BB into the breach for the magazine but usually this porting of the trigger pull can have a bit of friction to it, not the case with the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol as it felt really smooth. The actual trigger release does require a bit more force but once y9u figure it out the guns world well and would make for good action shooting.
Type: BB Air pistol. Distributer:Umarex. Model:Smith & Wesson M&P9 M2.0. Materials: Metal and polymer build. Weight: 1.45 pounds (658 grams). Barrel: 3.6 inches, non-rifled. Total Length: 7.5 inches Propulsion: CO2 x1. Action: Semi auto blowback, single/double action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 18 rounds. FPS: 375.
Trigger Pull: The trigger pull on the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol is about medium weight and is on the longer side to allow for the internal mechanism that pushes a BB for the magazine into the breach of the gun with each pull of the trigger. This does add a bit of additional resistance especially when the magazine is full of BB’s. As the magazine empties the spring resistance becomes less and makes the friction on the trigger less noticeable. When the slide blows back this does cock the internal hammer/striker allowing for less trigger pull then if the hammer is not actuated but I would say the trigger feels more like a double action trigger than a single action trigger even though most shots will be fired in single action.
Accuracy: I have not performed my Field Test Shooting Video for the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol so stay posted for that. Umarex has claimed an velocity of around 375 FPS adn this Airgun shoudl be abel to achieve that with it’s partial blowback more effect use of CO2. In terms of accuracy well I guess we will find out when I make my shooting review…
Build Quality: The Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol build quality is fairly decent , fit and finish looks good with not too much slide wiggle and the materials used are both metal and plastic or polymer that look to be good quality.
Realism: The Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol in terms of looking like the real steel version of its counterpart is very close for sure, would be hard to tell without further investigation. Umarex has done a great job of making this Blowback Airguns look believable by covering the CO2 screw, recessing the barrel and even working the manual safety into the right side slide catch release. In terms of operation the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol functions as you would expect other than it can not be easily filed striped and the blowback operation does not cycle back as much as a full blowback gun would.
Pros:
Very accurate replica of the S&W M&P 9 M2.0.
Fairly accurate weight and feel to it.
Metal and plastic parts where you find them on the real steel version, fit and finish is good.
Working trigger and manual safety and working slide catch and release.
Full size dropout metal magazine that holds BB's and CO2.
Warning instructions are discreet under the trigger guard.
Recessed barrel and hidden CO2 screw for more realistic look
Fully Smith & Wesson licensed via Umarex.
Rail for add on accessories.
White dot sights for easy target acquisition.
Comes with three sizes of interchangeable grips S/M/L.
Higher fps and more shots per CO2 than full blowback versions.
Cons:
Not full blowback but uses partial blowback.
Manual safety worked into right side slide catch release (Maybe good, maybe bad).
Sight are not adjustable.
Trigger is more like a double action trigger.
Comments: Overall the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol makes for a nice replica Blowback Airgun version of the S&W M&P 9 M2.0. There are some compromises with this version mainly the partial blowback operation that does make the trigger a bit heavier and longer than a true single action trigger would be, the slide does not cycle as fully as expected either and y9ou can not easily field strip this version. That said the shorter blowback action and the way the BB is pushed forward into the breach before each shot means that the Umarex S&W M&P 9 M2.0 Blowback CO2 BB Pistol will have a high FPS and will also get more shots per CO2. So you decide what may be more important to you at the end of the day? True realism or better performance?
My Vimeo Videos for the Umarex Smith & Wesson M&P9 M2.0 CO2 Blowback BB Pistol:
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS requirement using a .20 gram Airsoft BB. In my previous video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol but swapped out the longer barrel for the shorter barrel to see how much the sorter barrel reduces velocity and also if there is an impact on accuracy? Make sure to watch that video to get the scoop on the shorter barrel with both the Umarex Glock 17 dam Glock 19 GBB Airsoft Pistols
For the velocity portion of this test I placed several .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 355 average FPS reading which is very close to the claimed 360 FPS when using .20 gram Airsoft BB’s so if I had been using a lighter BB I would have for sure seen velocity up and over the 360 FPS.
In terms of accuracy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol also performed really well, maybe not as well as the short barrel Glock 19 Gen 3 I tested just last week that seemed to group just a little bit tighter and was a little bit more well vented on the target. Both the Glock 17 and Glock 19 shot a bit low but I am sure a slight hop-up tweak could rectify that. I did however manage to get around a 2 - 2.5 inch 10 shot grouping.
So in summary both the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols at least for now come with the longer barrels only and so you options are to either cut down the existing barrel or buy a shorter barrel and replace it, that is unless you like the look of the long sticking out barrel ;) You will get a velocity drop of around 75 FPS with the shorter barrel installed but I would say accuracy should be about the same at the end of the day.
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS cut off using a .20 gram Airsoft BB. I wanted to see how much of a difference the shorter barrel would make so I will be comparing the short barrel with the long barrel to find out the FPS and accuracy differences. In the Video I only shoot the Umarex Glock 19 Gen 3 GBB Airsoft Pistol with the short barrel but in my next video I Shot the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel for comparison.
For the velocity portion of this test I placed 5 .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 276 average FPS reading with the slowest shot hitting 274 FPS and the fastest shot hitting 278 FPS so really close. Keep in mind I was using .25 gram Airsoft BB’s rather than .20 gram Airsoft BB’s so I would imagine the Umarex Glock 19 Gen 3 GBB Airsoft Pistol even using the shorter barrel should hit closer to 300 FPS with the lighter Airsoft BB’s.
In terms of accuracy the Umarex Glock 19 Gen 3 GBB Airsoft Pistol also performed really well, I did not make any adjustments to the gun after installing the shorter barrel not even to the hopup. I was pleased to see a fairly well centered 10 shot grouping mostly within a 2 inch grouping with perhaps one flyer extending that group to about 2.5 inches. All shots where well centered left to right but just a light bit under the target, a quick hopup adjustment should rectify that.
My next Vimeo Video will be focusing on the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel to see what kind of velocity gains we get for it and if the longer barrel helps with accuracy at all so look for that video early next week!
