I stopped by the ICS Booth, we don't sell too much of their products but have carried a few items from time to time. ICS caries some nice quality Airsoft guns including the M1 Grand with real wood stock, and some AK & AR variants.
One of our suppliers had the new FN Herstal Five-seveN Blowback Airsoft pistol, I believe made by Marushin. Like the real FN Herstal Five-seveN, the pistol is pretty much all polymer including the slide and frame. This pistol also uses CO2 in the full size drop out magazine which should make it fairly powerful.
Looks like there is another Dan Wesson contender available now in the form of a Swiss Arms S&W 357 Magnum 4 inch and 6 inch barreled version, they look really nice and like the Dan Wesson have the realistic reusable brass shells that hold the 4.5mm Steel BB's.
Ever considered owning a mobile Gunsmith vehicle, look no further, I came across this pimped out Firearms Van complete with machine guns mounted in the front :) Inside was a complete firearms workshop.
Last but not least, we had some fun while in Vegas. I go down for the SHOT Show for business but I also bring my wife and we make time for some non business related activities. I generally stay at the WorldMark resort each time and this year the weather was pretty nice so we where able to get some sun by the pool a couple of days and I even got a tan line! Of course the food and entertainment is always awesome in Vegas.
We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.
Gamo did not have much in terms of new Replica guns this year either? Again, Gamo does seem to focus more on their hunting and target air rifles which for me is not my focus. Pretty much the same Replica guns as last year...
This year the Crosman booth was a bit of a let down in terms of "Replica guns" There really wasn't anything new to speak of? I didn't hang around too long to check on the non-replica guns, perhaps they have been focussing on that area of their market for this year?
One 4.5mm CO2 Blowback BB Pistol they featured as a prototype version last years was on display this year as the final product, the Crosman GI Model 1911BB. And again I was not overly impressed. The Crosman GI Model 1911BB looks for the most part like a 1911 except for the funky trigger which is supposes to look like a 1911 single action trigger. In reality it is a rather heavy double action trigger not at all true to a 1911. I was also puzzled by how recessed the barrel was, sure it's nice to have a slightly recessed barrel to make the pistol more believable but the GI Model 1911BB inner barrel is recessed at least an inch or more robbing this pistol of potential fps.
Guess I'm going to have to try one out at some point to see if it shoots better than I am giving it credit for.
One product from Crosman that is kind of a crossover between a replica and a PCP rifle is the Crosman MAR177 PCP AR Conversion Kit. It is designed to replace the top receiver for a standard AR allowing AR owners to shoot .177 caliber pellets using a standard Pre Charged Pneumatic system with their AR platforms. Of course you need an AR lower to use the Crosman MAR177 PCP AR Conversion Kit.
I also visited my friends at the ASG booth but for some reason I did not get a photo of their booth? I do have some video walk through stuff I will show you in my YouTube Video coverage of this years Vegas SHOT Show. Most importantly I have lots of gun photos so let's take a look at them...
One of my favorite ASG pistols is the Bersa BP9CC, I have already reviewed it and I just really like how this gun looks and holds, ASG took it one step further this year by adding a two-tone silver version and I have to say it looks awesome in person, my photos do not do it justice at all :(
A new handgun to the ASG blowback pistol series is the CZ P-09 Duty Pellet pistol. Basically it shares similar mechanics to the Umarex PX4 and Gamo PT-85 using the double sided rotary pellet magazine with 8 shots located on each end of the stick magazine. The ASG CZ P-09 Duty features a metal slide, working hammer and safety.
Another pellets pistol that should be very familiar to most of you is the new .177 caliber pellet shooting Dan Wesson in 6 inch silver and 8 inch black versions. ASG added a rifled barrel and redesigned solid brass shells that hold pellets instead of 4.5mm Steel BB's. Expect to take a little bit longer to reload the pellets as unscrewing the tip of each shell is required to place a .177 caliber pellet in each bullet tip.
Of course ASG has tons of licensed pistols to choose from, many on both 4.5mm Steel BB and 6mm Plastic Airsoft!
One new rifle that stood out to me was the ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle, the Scorpion features an intelligent AEG system that detects when there may be a potential feeding problem and also when the magazine is out of ammo.
Umarex had a lot of new products this year so I thought I would start off showing you some of them. I will be following this post up with a full 2014 Vegas SHOT Show video once I finish posting some of my photos and comments on the show events.
Here is a photo of the main Umarex Booth.
I have always liked the 4.5mm BB version of the Umarex Makarov, Umarex now has the Makarov Ultra version that features blowback, a working slide catch and full size drop out magazine, looking forward to testing this one out!
Another kind of new addition to the 4.5mm Steel BB lineup is the Umarex Beretta Model 84FS. It has been available overseas but is now coming to North America. The Umarex Beretta Model 84FS also features blowback and a full size drop out magazine.
I'm not sure if we needed another rebranded version of the KWC 1911 Blowback BB pistol, but we got one anyways! Umarex now has their own version of what looks to similar to the KWC Tac A1 but with Colt licensing.
Umarex also made up a very limited edition and very weathered looking blowback BB shooting 1911 based on the KWC design called the Colt 1911 WWII Commemorative. I am not sure how many where made but I know there are not a lot of them... Hope I can get my hands on one...
Umarex came out with Smith & Wesson 327 TRR8 last year and this year they have added a similar styled 4.5mm Steel BB shooting revolver with removable shells but in a licensed Colt Python 357 version.
Last but not least and going back many years, Umarex is bringing out another Legends Series 4.5mm BB pistol. The German Mauser C96, I'm not 100% sure if it's blowback or not but it does seem to have a working action, the main pistol is made out of Polymer but it does have a full size drop out magazine and seems to have good weight overall. Most of the parts work like the original Mauser C96 including the adjustable rear sight and safeties.
I get many question over on my Vimeo Channel, lots of times people asking me which gun is better and in most cases it really comes down to personal preference. But in some situations the comparisons are really close and to be honest it's even hard for me to decide which gun I think is better.
I get asked which one has higher fps, or is more accurate, or has harder blowback recoil... the list goes on. Without actually taking both gun outside and doing a head to head test using the same exact situations, I really can not honestly tell you! So that's exactly what I am going to do. Take some of the most commonly asked about gun comparisons and have a showdown.
Over the next while I will be making a total of five separate videos where I compare the following CO2 BB pistols head to head:
So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.
Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!
After posting my Table Top Review for the Gamo MP9 Blowback CO2 Pellet and BB Tactical Airgun, It seemed like most people where pretty interested with it and where looking forward to my Field Test Shooting Review. So I wanted to get this one out before the Holidays! Thought I would wear my Santa hat for this one :)
I did manage to get my Chronograph problem figured out so for this test I got reads on all 8 shots which was awesome! So how did my Gamo MP9 Blowback CO2 Pellet and BB Tactical Pistol perform? Pretty nicely overall, since it has 8 shots at each end of teh 16 shot rotary magazine I decided to base my testing on 8 shot groups. The first 8 shots where aimed through my Chronograph resulting in an average 415 fps using 7 grain RWS lead pellets. Not bad considering how cold it was and the fact that I was not using the super light weight PBA® Platinum Pellets. I would expect even lead pellets to hit 450 fps on a warm day.
The next 8 rounds where designated for the paper target which was setup 30 feet from my semi rested position (rested on sand bag and standing in the back). All 8 rounds shot within 1.5 inches and I am pretty sure I could do this all day long with this pellet shooter. I then emptied the other half o my magazine on my swinging steel targets and it appears I hit them most of the time looking back on my video.
The blowback is minimal with this CO2 blowback pistol, I don't think the internal blowback mechanism caries that much weight to it but you do feel some blowback when the CO2 is new and full. Gamo claims the trigger to be around 9.5 pounds worth of pull but to me it feel much lighter, combine that with the pull length being fairly short and you can shoot 8 rounds off at a time in a hurry with this Gamo MP9 Blowback CO2 Pellet and BB Tactical Airgun.
If I could have my way I would have liked to have seen a working ejection port like the Umarex MP5K PDW and perhaps a bit more blowback feel but other than that the Gamo MP9 Blowback CO2 Pellet and BB Tactical Pistol is a great replica CO2 Blowback pellets gun for the money.
As promised I did a redo of my Original Chronograph Test for my Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol. The first time around I just could not get my Chronograph to read in the poor lighting I had going on that day. I spent a fair bit of time doing some testing with my Chronograph since it is that time of year when the lighting is poor and determined that I need to use the white defusing panels as it seems that my roofline and the low light are playing havoc with the Chronograph readings.
Once I sorted this all out my Chronograph worked perfectly and I was able to get some readings for you with my Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol. As I assumed I did not get much over 350 fps. I also got a lot of variation in the fps, most likely due to the fact that I had to roll down the pellets a bit on the backside in order to feed them in the barrel from front to back, some pellets where tight and some where a bit looser, the looser ones seemed to shoot a bit faster as less of the pressure may have escaped out the back where the primer was situated.
Ammunition Capacity: 16 shot drop out double sided magazine.
FPS: 450 (with Gamo's PBA® Platinum Pellets.)
Trigger Pull: The trigger pull for the Gamo MP9 Blowback CO2 Pellet and BB Tactical Airgun is stated to be a single and double action trigger which is kind of true and false at the same time. Yes you can pull the charging handle back which does pull the internal hammer back for a single action hammer release but you can not shoot this pistol in double action only unless the charging hammer has been pulled back technically making the Gamo MP9 a single action only pistol? On the other hand, even with the hammer back, the trigger has to rotate the pellet magazine with each shot making it a double action only trigger? So what is it really, kind of both and kind of neither? Well who really cares about all that... In the end the trigger even though stated to be around 9.5 pounds of pull feels much lighter than that 9.5 pounds and has a pretty short action so shooting this gun rapid-fire is pretty easy and not too tiring on the finger. Another bonus is that the trigger safety also works, it's not just for show!
Accuracy: I will be following this table top review with a full field test shooting review shortly but I did have the chance to take my Gamo MP9 Blowback CO2 Pellet and BB Tactical Airgun out for a test drive so I would be able to give you some of my initial shooting feedback. I started off with a full CO2 using RWS 7 grain flathead lead pellets and placed a full 8 shots through my Chronograph, the first 4 shot a bit over 400 fps with the fastest shot being right around 430 fps, the last 4 shot a bit under 400 fps with the slowest shot hitting around 370 fps. Since it is December the weather outside was a bit frosty ;) so I would expect to get most shots in or above 400 fps in warmer weather. Moving on to some target results, my main goal was to sight my red dot in so I shot 4 shot grouping till I got my NcSTAR red dot centered and each 4 shot group seemed to produce consistent 1 inch groups for me from 30 feet away using a semi rested position. Not bad at all. Stay posted for my official Field Test Shooting video!
Build Quality: TheGamo PM9 Pellet/BB Pistol seems to be made fairly well, fit and finish is very good, the overall weight is good and like the real B&T MP9 has both a metal and polymer construction. The obvious metal parts are the trigger, rear stock swivel, CO2 magazine, internal barrel and I am sure lots of other internal parts. This Gamo pellet shooter is made for Gamo in Japan and is licensed by ASG.
Realism: The Gamo MP9 Blowback CO2 Pellet and BB Tactical Airgun looks pretty much exactly like a real B&T MP9, the size is right and the weight is close. All the parts are where they should be but not all of them work as many are moulded into the plastic shell. The working parts are the charging handle, fold out stock, standard safety, trigger safety and adjustment for the rear sight. There are magazine releases for both the pellet magazine and CO2 magazine but they are not in the traditional locations. It would have been nice if the ejection port cycled when being fired but it is also moulded into the polymer shell.
Very well made and has good weight and feel to it.
Blowback action gives a bit of recoil feel.
Rear sight is adjustable for windage, can also easily add a red dot.
Pre-test shooting results seems to be positive.
CO2 and magazine are both well covered to complete the realism of this replica.
Decent looking replica, fully Licensed B&T MP9.
Trigger feels pretty decent even though it is claimed to be 9.5 pounds of pull.
Lots of rail accessory mounting locations.
Working charging handle.
Fold out stock.
Cons:
Fold out stock is a bit flexible, would have been better in more solid plastic or even metal.
Pellet magazine release is a bit awkward.
No slide catch release or any way to know you are out of pellets other than counting or listening to the sound change.
Looks to have pretty low shots per CO2 like the other Gamo blowback pellet shooters.
Comments:
Overall, I really like the Gamo MP9 Blowback CO2 Pellet and BB Tactical Airgun, unlike the PT-85 and P-25, the Gamo MP9 is an actual replica and a fully licensed one. Not only that, the Gamo MP9 pellet pistol is a very good replica in terms of looks and function. I was able to get decent power and very good accuracy when I performed my pre-test. It's really great to see Gamo come out with a pellet gun replica this time around and what better gun to base it on other than the B&T MP9!
My Vimeo Table Top & Shooting Review for the Gamo MP9 Blowback CO2 Pellet & BB Tactical Airgun:
It's a bird, it's a plan, no wait... It's a pellet gun, no it's a cap gun, or is it a blank gun or maybe it's a real gun? Well it shoots lead bullets out of the barrel using gun powder so who really know's what we should call it? At least here in Canada you don't need a license to buy or own the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol so that's a good thing :)
So on with the Field Test Shooting Review results... Right off the top, I have no Chronograph test result, try as I did I could not get my Chronograph to read the pellet speed in the rather low light situation I had today, even with a bunch of added extra lights :( I would say off hand that it was shooting somewhere in the 350-450 fps range and when I do get a brighter day I will pop outside and shoot a couple rounds off and post the updated info here for you all, so check back in a bit if this interests you.
What I can tell you for sure is how this gun shot in terms of accuracy. I was expecting to spray pellets all over the target because there is no back sight on the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol, there is just a post sight up front. I was not even sure if I was going to get all the pellets on the paper. I even setup my target at the 20 foot mark just to be safe and as per usual I was using a semi-rested position by placing a sand bag to rest my hands on and then sitting on my knees in the back, pretty stable all around.
I started off the target test by aiming dead center but quickly found that I was shooting about 6 inches high, so my next 5 shots I aimed 6 inches below the bullseye and low and behold 4 out of 5 of the shots landed within 1.5 inches of each other. So I guess having a rear sight is over rated! If you can figure this gun out, the rifled barrel will direct each pellet straight and true so I think it really comes down to knowing how to line up the front sight with an imaginary rear sight and don't try to shoot really small targets far away. Once you get used to where to point the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol, you should easily be able to hit a pop can out to 20-30 feet with no problems.
Of course you have to reload this pistol before each shot which consists of cocking the hammer, placing a pellet in the front of the barrel and pushing it to the back with the loading ram rod and then positioning a #11 percussion cap on the primer nipple. Not a rapid fire gun at all but you do appreciate each shot considering the work involved. I also found pre-rolling the back side off my pellets helped to reduce the rear diameter so that the pellets loaded into the barrel much easier. You may have to blow out some residue between each shot which is not something I would recommend with most guns but it's very clear that this pistol is safe since in order to see the barrel obstruction there would be no percussion cap loaded onto the gun.
The Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol is a very unique pellet pistol and actually kind of fun to shoot since it involves a bit of work for each shot and of course some hands on time to figure out exactly how and where to point it to get accurate target results.
Make sure to watch my second Chronograph Test where I was able to get some readings for you!
It's that time of the year again where I dread having to go outside and do my Field Test Shooting Reviews, it's way too cold so the CO2 guns are not performing at their very best, neither am I since all I'm thinking about is "let's get this over so I can go inside and warm up with a nice cup of coffee ;)". It's also dark and dreary which means the lighting is not so good for the cameras or the chronograph, even with a bunch of extra lights setup, it's just not the same as what a nice bright day can do to spruce up the video and get the chrony to read the pellet speeds.
After some playing around with the lighting, I did manage to get my Chronograph to read a couple of shots and it shot just a bit above 350 fps, I would imagine the Daisy Power Line 2003 Blowback Pellet Pistol should get 400" fps easy on a warm day with a fresh CO2. At least we have an idea of whereabouts it shoots.
Once I finished playing around with my temperamental chronograph, I headed back to the 30 foot mark and took aim at my paper target using a semi rested position (sand bag rest up front, standing in the back). I shot the rest of the magazine, which was around 10 rounds left since I was originally loaded up with 30 rounds and ended up using a lot of them trying to get my Chronograph to read for the first part of the field shooting test.
Even with the fairly wide open sights, I managed to get a very consistent 1.5 inch grouping out my Daisy Power Line 2003 Blowback Pellet Pistol which kind of surprised me since I did not really feel the sight picture was suited for accuracy. Too much open space side to side but none the less it shoot straight and true and even very well centered on target with only a bit of pull to the left.
In terms of shoot-ability, the Daisy Power Line 2003 Blowback Pellet Pistol felt pretty good, the trigger is not the lightest for a single action only trigger but it is short and the break is clean. I had no miss-feeds or jams which I have heard this gun is prone to with some pellets. I did notice when shooting rapid fire without any pellets in the gun, it wanted to go into short full auto bursts, this may have been the cold weather and/or low CO2 playing into things.
All-in-all the Daisy Power Line 2003 Blowback Pellet Pistol is a nice air pistol to shoot even though it is a bit unorthodox looking, kind of a shame it's no longer in production. If you can find one in good working condition at the right price, pick it up because you may not get another chance.
Trigger Pull: The trigger pull on the Daisy Power Line 2003 Blowback Pellet Pistol even though it is single action only, is a bit heavier than you may expect, it is more of a medium pull with a very short take up and then somewhat unexpected release due to the medium to heavy pull. Quick shot succession should be achievable though due to the short trigger pull length.
Accuracy: Well we will have to find out in my followup Field Test Shooting Video Review? And I really hope that this pistol is in working order so I am able to bring that review to you shortly. I am expecting it to produce around 400 fps and some decent accuracy with its rifled barrel.
Build Quality: The Daisy Power Line 2003 Blowback Pellet Pistol is made in the US and is primarily a plastic built air pellet pistol, it does have some metal internal parts along with the screws, barrel, cross-bolt safety and CO2 Tab. Fit and finish seem to be fairly decent, in terms of reliability I have no idea but my hopes are high. I have heard that this pistol can jam if not using pellets that are agreeable with it.
Realism: The Daisy Power Line 2003 Blowback Pellet Pistol is not really a replica so to speak, it does kind of resemble a bloated version of a Browning High Power but is much larger and out of proportion when comparing the two of them. The actual mechanical aspects of this gun are not like any other gun I have every come across, specifically when it comes to the 35 shot rotary magazine as the pellets spiral internally from front to back. The single action blowback mechanism is also very unique to an airgun pellet pistol, it has been said that this pistol can be converted to full auto but I have no intensions of doing so.
If you have a Power Line 2003 then you have a really rare gun from Daisy.
True single action Blowback operation.
One of the only Pellet Pistols that can be converted to full auto.
High capacity 35 round pellet magazine.
Made in the US.
Cons:
No longer in production.
Kind of large for a pistol, not true to scale.
Mostly plastic build materials
None adjustable sights.
Comments:
I have had an interest in the Daisy Power Line 2003 for some time but did not know how or if I would ever get my hands on one and lucky for me it finally happened :) The main interest here is simply that it is the only pellet pistol I know of that has a true single action blowback operation and to top things off it has a 35 round magazine! Sure there is the implication that it can be converted to full auto but for me I really want to keep this pistol in factory condition, I have other guns that shooting in full auto if I feel the urge to go Rambo on anything ;) Definitely stay posted for my Field Test Shooting Review for this rare Daisy pellet pistol.
My Vimeo Table Top Review of the Daisy Power Line 2003 Blowback Pellet Pistol:
Trigger Pull: The trigger pull on the G&G AR styled Airsoft CM16 Raider is very smooth, the CM16 Raider uses a mechanical trigger that once the charging handle has been pulled back or "charged", works in a single action only manor with a slight bit of take-up and then a light predictable release. Each time the closed bolt gas blowback system shoots a round in semi or full auto, the internal action is ready for the next single action shot.
Accuracy: So far I have not tested Version 2 of the G&G CM16 Raider, but I have tested Version 1 so here are the result I got with Version 1 until I do my official Field Shooting Test with Version 2. When shooting from a 30 foot distance I did get some nice closely grouped shots from the G&G CM16 Raider Gas Blowback but when shooting in full auto it did spread apart somewhat, maybe from the GBB recoil? Version1 of the G&G CM16 Raider GBB shot an average of just over the 325 fps, I was using .25 gram BB's and it was a cool day so you can expect higher fps out of the G&G CM16 Raider when conditions are better.
Build Quality: The G&G CM16 Raider GBB being built on G&G Combat Machine Platform is targeted more for the price conscience person. The quality is consistent and good and I did not mind having more plastic in the G&G CM16 Raider GBB as my plan from the beginning was to add a lot of extra accessories and starting out with a somewhat lighter footprint made the gun still relatively usable even when all geared up with extra accessories. I also feel the plastic or polymer fiber upper and lower receiver and RIS rail system will also wear better than steel as it is more likely to flex rather than break in many situations, not to mention metal will show scratches and wear more over time.
Realism: Airsoft AR rifles in my opinion are very realistic in general, even the AEG versions work just like the real steel AR's with working charging handles, dust covers, bolts, magazine, adjustable stocks and sights, but I would have to give the advantage to the gas Blowback systems like the G&G CM16 Raider GBB as it has a full internal bolt with some decent recoil, it can also be field striped very similarly to a real AR15 rifle. The shot count is more like what you would find in an M16 or AR rifle which means you will need to consider ammo shot assuage and reloading more carefully when using it in an Airsoft game.
Super affordable Gas Blowback Airsoft AR M16 styled Rifle.
Very high rate of fire in full auto.
Polymer shell is both light and very durable, does not show scratches or wear as easily as metal.
All most every part is operational - Fully Ambidextrous now.
Can be fully customized, lots of mounting points on the RIS Rail system.
Fully adjustable Crane Stock.
Removable rear Iron Sight can be swapped out for other sighting systems and hardware.
Version 2 is a significant upgrade from Version 1.
Internals can be swapped over to make it an AEG gun.
Cons:
Some people may not like the polymer RIS rails and upper and lower receiver?
Would have liked to have seen some sort of a plate over the pistol grip to finish it off.
Comments:
I already really liked Version 1 of the G&G CM16 Raider GBB Airsoft AR Rifle and even bought a bunch of magazines and gear to sport mine up for use in some local Airsoft games, the upgrades and improvements found in Version 2 are the icing on the cake! I am hoping the internal performance enhancements will increase the FPS just a bit and Gas efficiency somewhat over Version 2 but will find out when I give it a thorough testing shortly. If you have been a bit scared off by the higher prices of some GBB Gas Blowback Airsoft rifles then perhaps take a look at the G&G Combat Machine Platform CM16 Raider in GBB, it may just change your mind about Gas Blowback Airsoft rifles!
My Vimeo Video Review for the G&G CM16 Raider Airsoft GBB AR Styled Airsoft Rifles:
Every so often I come across some interesting guns that people are willing to trade or sell me, if the price is right or the trade involves a gun I can part with, then I go for it and hopefully end up with something I may not be able to get new or that for me is hard to acquire in Canada.
My most recent trade added two new guns to the collection, a KSC M11A1 Airsoft Machine Pistol and a Daisy Power Line 2003 .177 Caliber Pellet Pistol.
Both of these guns are very hard to get since the KWC Airsoft M11A1 shoots a bit too week for import into Canada, and the Daisy 2003 is no longer in production.
The KSC M11A1 is a 6mm Airsoft pistol that shoots in both semi and full auto using a Gas Blowback open bolt system, it is a replica of the .380 Caliber Cobra RPB Industries M11-A1. Mine came with a mock suppressor and 7 magazines, although not all of them are in working condition. The KSC M11A1 is in working condition but needs a new Hop-up Rubber Bucking which I have on order.
The Daisy Power Line 2003 seems to be in really good condition but still needs to be tested, it is one of the only true blowback semi auto pellet pistols I know of, what I mean by this, is it has a true blowback system with a true single action trigger which means it can be converted to full auto which is one of the reason Daisy may have discontinued it. The Daisy Power Line 2003 uses a very interesting 35 round rotational magazine. Some say it is loosely styled after a Browning High Power pistol.
Stay posted for reviews on both of these pistols down the road.
You may wonder why I am doing another video on the G&G CM16 Raider Gas Blowback Airsoft AR Rifle? That's because the one I have here in this Update Video is Version 2 and yes there is a difference. So far I can only tell you about the obvious stuff since I really have not tested it out to see if there are any other performance gains with Version 2 over Version 1.
G&G has made some improvement with Version 2 enhancing several areas:
First off, there is now a selector switch on both sides of the receiver allowing for left or right handed use.
Carrying on with the ambidextrous theme, G&G also added a magazine release to the left side of the receiver.
Another missing feature was a bolt lock out when your magazine was empty, this has been added and so the bolt will lock back about 1/3 the way back locking out the gun and letting you know when you are out of ammo.
The bolt release on Version 1 was just for show and did not function. On Version 2, with the bolt lock, G&G also added a working bolt release.
Those are some pretty significant improvements to the G&G Armament CM16 Raider GBB Version 2 in my books! So now it's time to test it out and see if full auto mode has been improved. I found with Version 1, that when using full auto, the G&G CM16 Raider GBB would have some trouble getting through a full mag dump but when shooting very quickly in semi auto had no problems at all.
Trigger Pull: The trigger pull on the King Arms Thompson Machine Guns is fairly short and light as it is essentially just an on-off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected. As with all AEG systems their is a slight delay between when you pull the trigger and the shot is taken as the internal spring needs to compress first before releasing.
Accuracy: In many cases Airsoft guns can be just as accurate as 4.5mm BB guns, well at least at fairly close ranges, I was able to get most of my .25 gram BB 10 round target test shots within 1 inch from 30 feet away using a semi-rested position. There where a couple BB's that lengthened the group out to about 2 inches but still a very good result when you consider these are plastic BB's being used. In Terms of FPS, I did stick with the slightly heavier 2.5 gram Airsoft BB's and still got a decent 360 average 5 shot Chronograph test result making this AEG Airsoft rifle perfect for just about any Airsoft game type.
Build Quality: The King Arms 23 Karat Gold and Chrome Platted AEG Thompson Machine Guns are very well made using Aluminum Zinc Alloy bodies and real Wood Stocks, the fit and finish is very good and pretty much everything on these rifles are either metal or wood. You will have to polish these guns with a cloth from time to time since the mirror finish shows every smudge and finger print.
Realism: I'm not sure how many real 23 Karat Gold and Chrome Platted Thompson Machine Guns there are out there but there has to be at least a few ;) But going on how these guns look and feel, they are solid and very realistic. Some people have mentioned that the bolt should be on the top for some versions of the Thompson's but there are some Thompson's with the bolt on the side so I suppose we will let that one slide. The Wood stocks are a real plus adding to the overall weight and authenticity. Most parts works as they would on the real steel Thompson M1A1 Military or M1928 Chicago (Gold or Chrome) AEG Airsoft Machine Guns.
Nice high capacity metal magazines, can be mixed and matched.
Adjustable rear sight for windage with two sight positions (Notch & Peep).
Semi and full auto selectable with really nice rate of fire.
FPS is bang on for indoor or outdoor Airsoft games.
Fully Thompson licensed.
Comes with Certificate of Authenticity.
Cons:
Does not come with a battery or charger.
Prone to finger prints and smudges.
Need to use a screw driver to get at the battery.
Comments:
I am a big fan of the King Arms Thompson line, even the all black version with the plastic stocks looks and functions great. Internally the lower cost black version is the same and having previously shot my black Thompson, I knew these blinged out 23 Karat Gold and Chrome Platted versions where also going to perform as good as they looked! I'm not so sure about buying a Gold or Chrome Thompson for everyday use, since they will get knocked around and scratched up but if you are looking for the best of the best with real wood stocks and all metal parts then make sure to consider one of the Thompson
My Vimeo Video Review for the King Arms Thompson Gold & Silver AEG Airsoft Machine Guns:
We just received an order of KWC products so if you've been waiting for some out of stock items then go take a look! By the way, the KWC Beretta / Taurus full metal blowback BB and Airsoft versions now come semi and full auto enabled!
