View fullsize

I know this is an Airgun channel but when I get something that I feel my audience would be interested I in, I generally share it with everyone. I know many Airgun enthusiasts are interested in Airguns for a few reasons like the lower cost to buy and operate, the fact that there are more situations where you can shoot an Airgun and perhaps availability of these guns in terms of purchasing them without a license and laws pertaining to overall size, barrel lengths, magazine capacities and the likes. My latest acquisition does tick some of these boxes for sure.

View fullsize

My latest “Birthday” purchase was the GSG-16 which is a 22LR rimefire rifle made by www.GermanSportGuns.com and it is sort of an MP5 copy but this version is more like a Frankenstein version of an MP5 combined with an AR-15 in order to make H&K happy. Previous version of the GSG-16 (the GSG-5 and GSG-522) where too similar to the MP5 and so GSG had to make a third version less MP5-ish.

View fullsize

That said the GSG-16 has all the same controls as the MP5 so for training purposes it would be very suitable. Personally I like what GSG did in order to bring the GSG-16 to market without legal ramifications from H&K. I like all the rails and the way it kind of looks a bit more like an AR-15 even if the controls are not the same.

View fullsize

If you do like the MP5 look there are some kits out there for the GSG-16 to turn it back into more of an MP5 looking rifle but for me I don’t need to spend the extra money to be happy with the GSG-16.

No we do not have this item in our Replica Airguns Stores as we really only cater to guns that do not require any sort of lisenceing or permits. The closest thing you can buy I would say would be either the Umarex HK MP5-PDW CO2 BB Rifle, one of the MP5 Airsoft Rifles we have or even the Crosman MPW Blowback CO2 BB Rifle which is more AR based.

View fullsize

This was an unusual Field Test Review for me to do as I really don’t test out Bows or Crossbows all that much and I don’t have the best backstop setup for doing such reviews. So I spent some time making a backstop that was capable of stopping these just over 6 inch almost 10 gram or 150 grain bolts. It required some layers of foam and cardboard along with a blanket behind just in case, and even with this setup the bolts managed to lodge themselves right up to the Fletching (feather part of the arrow). Also make sure to watch my Table Top Video Review for the Bear X Desire XL Crossbow to see it up nice and close and get all the specifications and features.

I kind of wanted to change up this review just a bit and so I recorded my Chronograph Velocity at the same time as I did my Target or Accuracy Test to simplify things. I used 5 bolts in all and got what I felt was a good result using the Bear X Desire XL Crossbow.

In terns of velocity Bear X claims that the Bear X Desire XL Crossbow will shoot around 175 fps. I was able to get consistent 190+ fps readings using the 147 grain 6.5 inch aluminum bolts with my lowest fps being 192 and the highest being 194 so super consistent. This gave an overall Foot Pound energy of 12.4 foot pounds! This is enough for small pests for sure, it really comes down to accuracy at this point as you will want to get either a head or shoulder area shot for a humane kill.

View fullsize

I did do a pre test to make sure I was on target and duding this test I was able to get about a 5 inch 5 shot grouping. During my recored Accuracy Test this did open up a bit as one arrow went high and to the right so if I leave that arrow out of the test I did manage to get another 5 inch grouping with three of the arrows all within 1.5 inches of each otter. I figure with high quality arrows and some practice time using the Bear X Desire XL Crossbow, you should be able to use it for small pest control at least at closer in ranges.

All in all the Bear X Desire XL Crossbow surprised me with how powerful it really was and with the accuracy using standard default bolts. This is for sure not a toy and you would never want to accidentally shoot this at someone as it could cause a very serious injury or even death and I mean that since these arrow would for sure pierce several inches into the body. So if you’re looking for something with a bit more raw power than your standard non-regulated Airgun, then check out the Bear X Desire XL Crossbow over in both our Canada and US Online Replica Airguns Stores.

• Buy the Bear X Desire XL Crossbow in Canada

• Buy the Bear X Desire XL Crossbow in the US

View fullsize

Type: Compact Crossbow.
Manufacturer: Bear X.
Model: Desire XL.
Materials: Metal & plastic.
Weight: 2.3 pounds (1 kilograms).
Length: 20-22 inches.
Propulsion: Bow.
Action: Single action trigger.
Ammunition Type: Aluminum bolts (Comes with 3).
Ammunition Capacity: 1.
FPS: 175fps.
Draw: 60 pounds

View fullsize

Trigger Pull: The trigger pull on the Bear X Desire XL Crossbow is medium to heavy, it is a single action only trigger as you need ot cock the bow in order for the trigger to be engaged. The safety is also engaged when you cock the bow requiring you to take the Bear X Desire XL Crossbow off safe before shooting as an added layer of safety.

View fullsize

Accuracy: I have not made my Field Test Shooting Video for the Bear X Desire XL Crossbow and so I have not sea what to expect for it. I have watched a few videos of other people reviewing it and it looks to perform fairly well but until I get a few bolts in a target downrange I can not say for certain the accuracy of the Bear X Desire XL Crossbow. I will have to figure out some sort of a usable back stop in order to make this Field Test Shooting Video but have some ideas already on material to use as my back stop. FPS is claimed ot be around 175 and I will be doing my best to Chronograph the Bear X Desire XL Crossbow so we can confirm that rating for ourselves…

View fullsize

Build Quality: The Bear X Desire XL Crossbow is actually made pretty decently, yes it is mostly plastic and light weight but feels sturdy enough to hold, the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts and bolts that hold it together are some sort of plastic, the bow itself may be a composite material but I am not sure what exactly it is?

View fullsize

Realism: The Bear X Desire XL Crossbow is not a Replica as is what I usually review here on the channel. But I think their is a crossover in terms of interest for a product like this with people that are also interested in airguns. I know I like the Bear X Desire XL Crossbow and can see a place for it in my collection even if it’s not a replica product.

View fullsize

Pros:

• Fairly inexpensive.

• Super light weight.

• Can shoot in a variety of situations.

• Easy to draw the bow.

• Safety is automatically engaged.

• Picatinny rail already has iron fully adjustable rear sight but can mount a red dot if you like.

• Fiber optic front sight.

• 3 bolts included.

• 175 fps (not sure of the ft/lbs)?

• Comes with fore grip.

• 3 portion adjustable rear but stock.

View fullsize

Cons:

• Will need a good backstop or will lose or damage a lots of bolts.

• Takes a little bit of time to set it up but not too hard if you follow the instructions.

View fullsize

Comments:

The Bear X Desire XL Crossbow is an interesting product that once purchased and if you manage to not lose the bolts will cost virtually nothing to shoot since you can reuse the bolts all day long given you shoot them on target and that target does not damage the bolts. It may not offer the rapid fire action shooting of a replica semi auto CO2 Pistol but still challenges the shooter in terms of getting the best possible accuracy out of it and at the end of the day trigger time is trigger time! If you are looking for something a bit different than your CO2 Air Gun then maybe the Bear X Desire XL Crossbow will fill that requirement.

• Buy the Bear X Desire XL Crossbow in Canada

• Buy the Bear X Desire XL Crossbow in the US

In this Preview Unboxing Vimeo Video I take a look at five very different products! A Spring Piston .177 Caliber Pellet Pistol, an Airsoft GBB Pistol, a Compact Crossbow, a full auto CO2 Blowback BB Pistol and a PPC .22 Caliber Pellet Rifle.

View fullsize

First up is the Umarex Ruger Mark IV Spring Piston Pellet Pistol which is a single shot replica pellet pistol that shoots .177 caliber pellets at up to 320 fps using a spring piston break barrel system. The Umarex Ruger Mark IV Spring Piston Pellet Pistol is a target plinker with fully adjustable fiber optic sights and should be a lot of fun to shoot!

View fullsize

Next I take a look at a Gas Blowback Airsoft Pistol from Action Army that closely resembles the Ruger Mark IV pistol with perhaps a more compact look. The Action Army AAP-01 GBB Airsoft Pistol is full blowback a full size drop out magazine and fiber optic sights. It also come with a threaded barrel and barrel extension for adding a longer barrel and much suppressor.

View fullsize

Next on my list of new items is the Bear X Desire XL Crossbow which is a 2.2 pound compact bolt shooting crossbow that sports a rail system with included adjustable iron sights that also allow for a red dot if you want to really customize it. The Bear X Desire XL Crossbow has a 60 pound draw and shoots arrows/bolts at up to 175 fps.

View fullsize

Another AR BB Rifle/Pistol from Crosman is the Crosman A4-P Full Auto CO2 BB Pistol which is essentially a pistol version of the AR Platform. If you like the Crosman DPMS SBR, R1, PDW then you will probably also like the Crosman AP-4. Like the others it uses dual CO2’s and shoots 4.5mm Steel BB;s in semi or full auto at 1400 rounds per minute until the 25 round magazine is empty.

View fullsize

Last included in this preview video is the Air Venturi Avenger Regulated PCP Pellet Rifle. I’m a bit uncertain about this one as I am pretty sure it is the non detuned PAL version that requires a firearms license here in Canada as it shoots at full velocity (.22 caliber pellet at 950 fps). If that’s the case then it will not be available in our Canada Replica Airguns Store but may be available in the US Replica Airguns Store. If it is the detuned version or a detuned version becomes available in Canada then I imagine we will at some point have it in the Canada replica Airguns Store. That said the Air Venturi Avenger Regulated PCP Pellet Rifle uses compressed air and shoots either .177. .22 or .25 caliber pellets using a latch system and rotary magazine.

After about 4 years or so of not getting sick at all, I was almost starting to think I was impervious to viruses and colds and flues and then it finally happened… I got the Rona.

Now I am not 100% sure if it is the Rona since I have not been tested yet but all signs indicate it’s probably Omicron. I have ordered some antibody tests that I expect to come in shortly, I will be checking my blood for Covid-19 Antibodies once I know my body has had enough time to make them after getting sick this time.

In this video I talk about my symptoms and how I felt start to finish getting the Rona. I can say at least for me it was not big deal, the soar throat was probably the worst of it for me.

View fullsize

Type: Airsoft Rifle.
Distributer: ASG.
Model: Action Army T-11.
Materials: Metal and polymer build.
Weight: 3.9/4.5 pounds.
Barrel: 11.8 inches, non-rifled.
Total Length: 34.7/43.3 inches
Propulsion: Spring
Action: Bolt action repeater.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 50 round magazine.
FPS: 400-430.
Type: Pistol and Rifle versions.

View fullsize

Trigger Pull: The trigger pull on ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is light, short and crisp. There is virtually no take-up and the release point has no creep to it. I would say it is not too light but for sure one of the lighter trigger s I have tested on a Airsoft rifle.

Accuracy: I have not performed my Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun so stay posted for that. ASG claims around 400-430 fps velocity depending on the version which is kind of weird since both have the exact same barrel length internally and I would assume both use the same mechanical part throughout? I don’t have the rifle version to compare to but I will for sure test the velocity using my Chronograph for the pistol version when I do my Field Test Shooting Review along with accuracy performance.

View fullsize

Build Quality: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is well built for sure, it feels really solid in the hadn't and has good overall weigth to it for it’s size. You will find lots of metal parts where they need to be as in the inner and outer barrel, receiver, bolt, trigger, magazine release and I am sure most mechanical internal parts. Fit and finish is also very good.

View fullsize

Realism: The ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun is not a replace of any gun I know of but does have tab least the pistol version does look like a sawn off shotgun more than a sniper rifle. The gun overall all is very modern and ergonomic looking but in terms of being a replica of any specific real steel gun in production I don’t know of any it would resemble?

View fullsize

Pros:

• Top and bottom rails for lots of accessory add on options.

• Can swap over to a rifle version by adding on an interchangeable but-stock.

• Mock magazine allows for storage and transport of tools plus extras.

• Safety switch is in a great location for right handed shooters.

• Comes with included hand stop.

• Solid construction with lots of metal parts where they are important.

• Ability to add side rails.

• Great option if you are looking for a more compact sniper rifle.

• Comes in Pistol and Rifle versions.

View fullsize

Cons:

• Has an orange tip.

• Does not come with sights, will need to add some sort of optical or red dot sight.

• Does not come with speed loader, would have been nice.

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun. I won’t be able to test it out perhaps as far range as I would like to since I will be shooting it in the Replica Airguns Indoor Shooting range which allows me to test at 30 feet. That should give us a good overall idea on at least what it may be capable of since if we can get a tight group at 30 feet we should also be able to get a tight group at longer ranges with proper hop-up and BB selection. I like the option of being able to choose either the Pistol or Rifle version and both should perform about the same. Having the Pistol version will allow for a much more compact Sniper Rifle option much better suited for shooting in a variety of situations.

My Vimeo Videos for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun:

• Buy the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Pistol in Canada

• Buy the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Rifle in Canada

View fullsize

Make sure to watch my Table Top Video Review where I go into more detail about the specifications and details along with some nice close up video of the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle.

In this Vimeo Video Field Test Review I test out the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the indoor Replica Airguns Shooting Range to see how accurate it is and what kind fo velocity we can expect from it.

View fullsize

Starting with the velocity test I averaged out 8 rounds through my chronograph using 8.18 grain lead pellets using the dual 12 gram CO2 setup and I was able to average 445 fps which is not bad as these are mid grain weight pellets, lighter weight pellets would for sure get closer to the 490 fps claimed by Umarex. The temperate was about average room temp so not overly cold or warm.

Moving on to the accuracy test I placed all 9 rounds from the rotary magazine into a fresh paper target setup 30 feet away. I use a reseted seated position in the back with the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle resting on a sand bag up front and I was using the 4 power scope for this test which I setup earlier. My final result was for sure an under one half inch grouping, I did feel like I pulled one shot a little bit but I am sure this Airgun can get quarter inch groupings at 30 feet and I would expect half inch groupings at 50 feet so perfect for mid range small pest shooting.

View fullsize

Umarex does adversities this Air rifle as being very quiet but in Canada we are not allowed to have any type of suppressor even on airguns so I believe this Canada version has been disabled in that regard but the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is fairly quiet for sure with its long barrel and slightly lower fps than the US version. Overall the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is a lot of bang for the buck with the added 4x scope, included magazines that hold 9 rounds each and the ability to use either a dual 12 gram or single 88 gram CO2 setup. It also looks really cool and performs just as good!

• Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in Canada

• Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the US

View fullsize

Type: Pellet Rifle.
Distributer: Umarex.
Model: Fusion 2.
Materials: Metal and polymer build.
Weight: 6.5pounds (2948 grams).
Barrel: 22.5 inches, rifled.
Total Length: 40.3 inches
Propulsion: 12 gram CO2 x2 or 88 gram CO2 x1
Action: Bolt action repeater.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 9 round rotary magazine x2.
FPS: 490.

View fullsize

Trigger Pull: The trigger pull on Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle feels pretty good, it is fairly short and light having a claimed 3.5 pound release which is believable. You will need to obviously work the bolt for each shot that precooks the internal hammer/striker allowing for the short and light trigger.

View fullsize

Accuracy: I have not performed my Field Test Shooting Video for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle so stay posted for that. Umarex has claimed a velocity of around 490 FPS for the Canada version I will be testing, the US version has a claimed velocity of up to 700 for those in the US purchasing this Rifle. I am sure the included 4x32 optical scope once setup will help in the accuracy department when I test this CO2 Air Rifle out on a paper target setup 30 feet down range.

View fullsize

Build Quality: The Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is a fairly low cost target pellet Rifle when you consider it comes with a decent optical scope along with two 9 round magazines but even so the build quality seems very solid coming in at 6.5 pounds. The stock is plastic of course but there is lots of metal where you want it to be as in the bolt, trigger, safety and most other mechanical parts.

View fullsize

Realism: The Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle is not a replace of any gun I know of but does sport a very modern ergonomic look with its pistol grip and molded full stock. I like the built in picatinny rail which even though it does not offer any type of open sight configuration will allow for a variety of scope mounting options for near or far shooting.

View fullsize

Pros:

• Low cost for a full featured Air Rifle with included scope.

• Nice ergonomic modern looking design.

• Ability to use either 12 gram or 88 gram CO2 cartridges.

• Comes with 4x32 optical scope and all mounting hardware needed.

• Come with two 9 round rotary magazines.

• May be very quiet if the SilencAir technology is not disabled here in Canada?

• Single action 3.5 pound trigger fells good.

• Safety is large and easy to use.

• M-LOK slots for mounting additional hardware.

Cons:

• No iron sight option if you would prefer that.

• Limited to under 500 fps (Canada version).

• Not sure about the functionality of the SilencAir technology in Canada?

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle to see if it performs as good as it looks. I’ll probably use the duel 12 gram configuration for this test since I don’t plan on shooting 300 rounds with it for my testing. We should also find out if the SilencAir technology has been disabled or not with my Canada version but even so, a 500 fps Air Refile is not going to be all that loud either way at the end of the day. There are not a lot of Bolt Action multi shot pellet Air Rifles out there especially in this price range so I am really hoping it hits a home run when I test it so stay posted for that video…

My Vimeo Videos for the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle:

Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in Canada

Buy the Umarex Fusion 2 CO2 .177 Caliber Bolt Action Pellet Rifle in the US

In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns.

View fullsize

The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available…

View fullsize

Next up from Umarex is the fully licensed Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol, this product is distributed by Umarex but is made by KWC. Another solid metal pistol with a hefty 2.4 pound weigth that holds 21 rounds in its full size drop out metal magazine and offers both semi and full auto shooting at the flick of a switch!

View fullsize

Again from Umarex I showcase the Elite Force 1911 Tac CO2 Blowback Airsoft Pistol and like the Beretta Pietro it too is made in the KWC factory for Umarex. The 1911 Tac as the name suggest is a tactical version of the standard Colt 1911 but with some upgrades like a skeletonized hammer and trigger along with an ambidextrous safety, white dot sights front and back and a picatinny rail on the frame for add ons. You can expect velocity to be somewhere in the 400 fps range and the full size drop out metal magazine holds 15 Airsoft BB’s.

View fullsize

Type: BB Air pistol.
Distributer: Crosman.
Model: MAKO.
Materials: Metal and polymer build.
Weight: 1.71 pounds (775 grams).
Barrel: 6 inches, non-rifled.
Total Length: 8.6 inches
Propulsion: CO2 x1.
Action: Semi auto blowback, double action only.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 20 rounds.
FPS: 425.

View fullsize

Trigger Pull: The trigger pull on the Crosman MAKO Blowback CO2 BB Pistol is a little on the heavy side since it is double action only and it is also longer again being double action only. That said it is fairly smooth and not super heavy which shoudl allow for decent action shooting. It would have been cane if the hammer could be engaged for single action shooting but the design of the Crosman MAKO Blowback CO2 BB Pistol does not allow for this and therefore the hammer is just for show in this case.

Accuracy: I have performed my Field Test Shooting Video for the Crosman MAKO Blowback CO2 BB Pistol which can be found here. I won’t get into too much detail but overall you can expect velocity to be in the 400 fps range with a brand new CO2 and accuracy was decent form 30 feet away but could be a bit tighter. I was surprised at how snappy the blowback action was for a light weight slide with a light spring in it.

View fullsize

Build Quality: The Crosman MAKO Blowback CO2 BB Pistol feels solid enough in the hand and the materials used I am sure are on par with most Airguns out there but the gun may come across as being on the cheaper side as it lacks some of the more full features of more realistic functioning blowback Airguns. Just don’t let that make you think it is not well made as it is well made and may even be more reliable over time..

View fullsize

Realism: The Crosman MAKO Blowback CO2 BB Pistol looks the part of a beretta M92 at first glance but when you get a little closer you can really tell it is an Airgun at heart which is not a bad thing since that’s exactly what it is. You will find working parts like the magazine release and slide catch release and the slide does function since it is a blowback Airguns but the Crosman MAKO Blowback CO2 BB Pistol does have that funny inner barrel that pops out of the front every time you pull the trigger and parts like the slide safety are moulded into the slide and the hammer is just for show.

View fullsize

Pros:

• Fairly inexpensive.

• High FPS rating for a blowback BB pistol.

• Easy to see Fiber Optic front and rear sights.

• Multi tone color scheme looks good.

• Has a pleasing tactic look to it.

• CO2 tab is nicely hidden inside grip under magazine but plate.

• Double action trigger pull is long but not too firm.

• Picatinny rail for adding accessories.

• Notched grips for a firm hold (best for larger hands)

• Has a working side catch release that locks back after the last shot.

• Has a surprising decent blowback action to it.

Cons:

• Slide action feels clanky.

• Hammer is just for show, does not do anything, no single action shooting ability.

• Grips are large and will be to bog for smaller hands.

View fullsize

Comments:
All in all the Crosman MAKO Blowback CO2 BB Pistol is a fun inexpensive CO2 Blowback BB Pistol that surprised me a bit when I actual got to shoot it. I originally though ti would feel kind of cheap to shoot but the snappy and firm blowback action and higher fps than usually found on blowback Airguns was surprising! The fiber optic sights making lining up target super easy and for a double action only shooter the trigger is not too bad so if you're a Beretta and Crosman fan then perhaps this is the pistol for you.

My Vimeo Video for the Crosman MAKO Blowback CO2 BB Pistol:

• Buy the Crosman MAKO Blowback CO2 BB Pistol in Canada

• Buy Crosman Blowback Airguns in the US

View fullsize

Wow, an accessory review, not many of these :) Today I take a look at the Amomax Airsoft Airgun Holster product line since at some point you may want to put your gun in a holster or practice drawing your gun from a holster?

The good news is we just got in a decent amount of product for our Amomax Airsoft Airgun Holsters. Here is a bit of info about Amomax but of course make sure to watch the video as I take a good look at a few of the versions we sell in our Canada and US online Replica Airguns Stores.

View fullsize

Amomax holsters are compatible with 4 different carrying platforms :paddle (standard), belt clip, MOLLE, and drop leg platforms. All the carrying platforms can be replaced by only one screw. Users can carry them in daily use, outdoor sports, normal shooting training and competition. Holster will stay firmly on a belt, leg and MOLLE system even in fast moving situations with a quick release Retention System button that keeps the gun locked in place until you are ready to draw. Holster body and carrying platform are connected with a tooth gear that allows for 360 degrees of rotation. User can easily adjust the carrying position to fit their needs.

View fullsize

Amomax Holsters are currently available in the following versions:

• Glock 17/22/31

• 1911 (Fits most brands 1911’s)

• USP

• Sig P320

• Single and double Universal Magazine

• Buy Amomax Airsoft Airgun Holsters in Canada

• Buy Amomax Airsoft Airgun Holsters in the US

View fullsize

Today I decided to get outside since the weather was nice and make my Field Test Shooting Video for the ASG TAC-6 CO2 Airsoft Rifle (actually outside in the filed!) After all the ASG TAC-6 CO2 Airsoft Rifle is a sniper rifle and so I wanted to test it out at longer ranges than my 30 foot indoor shooting range can allow for. So I setup two paper targets at around 40 feet and 80 feet out, the actually distance may have been longer than that?

Starting off my Field Test Review I placed five .25 gram plastic Airsoft BB’s through my Chronograph and averaged 446 fps which is 6 fps faster than the claimed 440 fps from ASG. And that was with .25 gram Airsoft BB’s so if I was using lighter .20 gram BB’s I would expect velocity closer to around 500fps so don’t be shooting anyone with this Airsoft Rifle at close ranges!

View fullsize

Next I proceeded with my accuracy test placing 5 rounds on the target setup around 40 feet downrange. I managed to get all 5 rounds within about 2 inches of each other, not bad since this is a good 10 feet more than I usually test my Airsoft Rifles at. With the remaining 10 rounds in my magazines I was hoping to get at least a couple shots on my paper target setup a good 80 feet away but did not have much luck, I even reloaded the 15 round stick magazine 2 more times and gave it a go but again with no success! The Airsoft BB’s seemed to want to angle off in all direction usually up and to the right or left right before the 80 foot target, perhaps I would have had much better luck at 60 feet?

All I can surmise from this higher range Field Test is that the ASG TAC-6 CO2 Airsoft Rifle is not really a long range Airsoft gun at least with the .25 gram Airsoft BB’s I was using, maybe heavier Airsoft BB’s would settle down a bit more? I can say at ranges up to 40 feet the ASG TAC-6 CO2 Airsoft Rifle did perform just fine so keep that in mind when looking into buying one of these as smoking cans at 30-40 feet will be no problem and make for some fun times in the back yard or even basement makeshift gun range.

Make sure to also watch my Table Top review for the ASG TAC-6 CO2 Airsoft Rifle.

• Buy the ASG TAC-6 CO2 Airsoft Rifle in Canada

• Buy the ASG TAC-6 CO2 Airsoft Rifle in the US

View fullsize

Type: Airsoft Rifle.
Manufacturer: ASG.
Model: TAC-6.
Materials: Plastic with some internal metal parts.
Weight: 3.5 pounds (1588 grams).
Barrel: 12 inches, metal non-rifled.
Length: 36 inches.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: 6mm BB's.
Ammunition Capacity: 15 round metal stick magazine.
FPS: 440.

View fullsize

Trigger Pull: The double action only type trigger pull on the ASG TAC-6 CO2 Airsoft Rifle is not too heavy but it is rather long so really quick rapped fire shooting will require some finger work. The trigger reset is right at the begging of the pull so you need to make sure you allow the trigger full range of motion or you may miss the odd shot.

View fullsize

Accuracy: I haven't done my Field Test Shooting video just yet for the ASG TAC-6 CO2 Airsoft Rifle but will shortly so stay posted for that video. ASG claimed the fps to be right around 440 and I am assuming with .20 gram Airsoft BB’s, I will most likely busing .25 gram Airsfto BB’s for my testing so I am hoping for around 400 fps or so. With the fiber optic front sight and fully adjustable rear peep sight I shoudl be able to get some decent rounds on target downrange and hopefully get a nice grouping.

View fullsize

Build Quality: The ASG TAC-6 CO2 Airsoft Rifle is mostly plastic but feels pretty good in the hand with decent fit and finish. There are some metal internal part along with the outer barrel and top rail but for the most part the ASG TAC-6 CO2 Airsoft Rifle is all plastic including the trigger and front and rear sights.

View fullsize

Realism: The ASG TAC-6 CO2 Airsoft Rifle is not a replica of any modern rifle that I know of but it does look a bit like a Beretta CX4 Storm especially the back half of it. The flash hider and top and bottom raise add to the realism.
Available From: The Replica Airguns Store.

Pros:

• Very customizable with rails top and bottom.

• Comes with a rather nice Bipod that can be used with other rifles.

• Front and back removable Iron sights are very usable, fiber optic in front, peep in back.

• Safety switch is in a great location for right handed shooters.

• Canada version comes with black flash hider.

• Mostly plastic but solid construction.

• Rubber Butt Pad is nice and thick.

• Removable barrel to reduce size for easier transportation.

• Also come in 4.5mm Steel BB version.

• Optional Integrated laser can be added.

View fullsize

Cons:

• DOA Trigger pull is a bit long which will slow down rapid fire shooting a bit.

• Mostly Plastic Polymer build.

• Why not a longer inner barrel for possible more fps?

• CO2 is in the Pistol grip and not the magazine so may not be great for on field battles.

View fullsize

Comments:
This may not be the most exciting Airsoft Rifle I have reviewed, it does look kind of cool and the price is right compared to other Airsoft Rifles. Who is it really for? I would say someone looking for an Air Rifle for plinking in the backyard or basement that perhaps want's a little bit more safety in terms of using plastic BB’s rather than Steel BB’s. Sure you can use the ASG TAC-6 CO2 Airsoft Rifle for Airsoft wars but most people want something a bit more realistic in terms of looks and function. Because the ASG TAC-6 CO2 Airsoft Rifle does have built-in Popup it shoudl be able to reach out to longer ranges so we will have to see if it can perform decent at longer ranges when I do my Field test Shooting Video.

My YouTube Table Top Review Video for the ASG TAC-6 CO2 Airsoft Rifle:

• Buy the ASG TAC-6 CO2 Airsoft Rifle in Canada

• Buy the ASG TAC-6 CO2 Airsoft Rifle in the US

View fullsize

This Table Top Comparison video is also a bit of a revisit since I reviewed the US version of the Sig Sauer ASP MPX .177 Cal. Pellet Rifle back in 2016 when it first came out. I actually had to go across the border and bring it back across with me which can be a lot of fun dealing with Canada Customs border agents. They are well meaning but often don’t fully understand their own import guidelines for Airguns. After about an hour or so I was able to convict the CBSA officer that no my Sig Sauer Airguns where not regulated Firearms and no they did not require any registration or transfer permits.

View fullsize

Anyway that was 5 years ago and now we have the Canada import version which makes purchasing one of the Sig Sauer ASP MPX .177 Cal. Pellet Rifles so much easier and to be honest there really isn’t any difference as far as I can tell since my original US version even though it had a claimed fps of up to 600 was actually closer to somewhere in the mid 400’s using standard .177 caliber lead pellets.

View fullsize

Below are the basic specifications and if you want more info than that either watch the video or checkout my Original Table Top Review for the Sig Sauer ASP MPX .177 Cal. Pellet Rifle since both the original US and newer Canada versions are virtually identical…

View fullsize

Type: Pellet Rifle.
Manufacturer: Sig Sauer ASP
Model: Sig Sauer MPX ASP
Materials: Metal and Nylon Fiber build.
Weight: 7 Pounds (3300 Grams).
Barrel: 8 inch steelrifled.
Propulsion: 88 or 90 Gram CO2.
Action: Semi Auto,double action only.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 30 rounds belt fed.
FPS: Up to 575-600 fps (When shot by a Unicorn) Probably closer to around 450fps

View fullsize

I will be following this Tabel Top Review for the US and Canada Sig Sauer ASP MPX .177 Cal. Pellet Rifles with a Field Test Shooting Comparison to see if anything has really changed interns of velocity and accuracy so stay posted for that video coming out very soon…

• Buy Sig ASP MPX Air Rifles in Canada

• Buy Sig ASP MPX Air Rifles in the US

View fullsize

As with most of the new tech I purchase or acquire that I will be using in my Videos for either my GetFitOver40 or ReplicaAirguns YouTube channels, I generally like to do some sort of a practical review for the item. In this case I take a look at the Synco G1 (A2) Wireless Microphone Set which is a pair of wireless transmitters that pair with a single dedicated receiver allowing me to quickly and easily capture good quality audio for my Videos.

For the past couple of years my go to microphone setup for my video was to use a generic lapel mic connected to my Samsung Galaxy Smartphone recording into an audio program. I would then send the audio file via dropbox to my computer where I would then line up the audio file with the video file in my video editing software to get a much higher quality and more clear voice recording versus what the camera mic would be able to capture.

This system has been working fairly well for me but required a somewhat cumbersome lapel cable and of course my bulky Smartphone in my pocket at all times but did allow me to be as far away from the camera as I wanted without any interference or loss of audio clarity.

View fullsize

After playing around with the Synco G1 (A2) Wireless Microphone System I have determined I will most likely simply be clipping the transmitter onto my shirt without the lavaliere mic plugged in and transmitting the audio into either my Samsung Smartphone or my iPad where I can then again dropbox the audio file to wherever I plan on editing the video.

This video was kind of a test to see how everything sounded in terms of the lapel mic versus the built in mic. What settings to use and how distance effected the audio signal and quality. Unfortunately the lapel mic was a bit close to my voice causing some distortion to occur but you can still hear what I am saying no problem. In the future I would place the lapel mic a bit further away from my voice lower down on my shirt or simply use the built in mic as it was not as sensitive to this distortion and seemed to handle louder volume much better than the lapel mic.

View fullsize

Here are some of the specifications for those that like that sort of info :)

Transmitter (TX )

• Wireless Transmission - Digital 2.4GHz

• RF Frequency Band - 2400-2483.5MHz

• Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

• Latency - 12.5ms

• Mounting - Pocket Clip

• Audio Input - 1/8" / 3.5 mm TRS Mic Input

• Audio Input Level - 1V (0dBV)

• RF Output Power - ＜10mW

• Power Requirement - 3.3V-4.7V

• Battery Type - Built-in Lithium Battery

• Battery Charging Time - 1.5h

• Battery Life - 5h

• Dimensions - 52X42X16mm

• Material - Plastic

• Weight - 35g

Receiver (RX)

• Wireless Transmission - Digital 2.4GHz

• RF Frequency Band - 2400-2483.5MHz

• Approximate RF Sensitivity - -81dBm

• Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

• Latency - 12.5ms

• Mounting - Pocket Clip

• Number of Audio Channels - 2

• Audio Output - 1/8” / 3.5 mm TRS Mic Output - 1/8“ / 3.5 mm TRS Headphone Output

• Gain - 0-4 Level (0 to 8dB)

• Audio Output Level - Line Out: 1V, Monitoring: 25-30mW

• Power Requirement - 3.3V-4.7V

• Battery Type - Built-in Lithium Battery, 400mAh

• Battery Charging Time - 1.5h

• Battery Life - 5h

• Dimensions - 52X42X16mm

• Material - Plastic

• Weight - 35g

Microphone

• Form Factor - Built-in/External Mic

• Sound Field - Mono

• Polar Pattern - Omnidirectional

• Frequency Response - 50Hz-20KHz

• Sensitivity - -40dB (±3 dB, re 1V/Pa at 1KHz)

• Max. Input SPL - 135dB SPL (at 1KHz)

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Make sure to also sign ePetition e-3201 to put a stop to Bill C-21:

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

View fullsize

In this YouTube Video I test out my new Insta360 One R with the 1 Inch Mod, comparing it to my Sony RX 100 IV to see how they compare against each other.

It’s not really a fair comparison since my Sony RX 100 IV is now 5 or 6 years old which is a long time for a digital camera but it has been really good to me and provided some really great quality video over the years. Compare that to the Insta360 One R that is about a year on the market now and you would think the clear winner would be the Insta360 One R.

On it’s own the Insta360 One R with the standard 4k lens would perform well against the Sony RX 100 IV but the Sony RX 100 IV has a 1 inch sensor allowing it to get the most out of each pixel and since I primarily shoot in 1080p 60 frames per second I need to get as much out of each pixel as I can.

View fullsize

One really great feature about the Insta360 One R is that it is modular so I can swap the 4k module out for a 5.7 k 360 module or even a 1 inch 5.3k module allowing both the Insta360 One R and the Sony RX 100 IV to have that large 1 inch sensor keeping the comparison more inline with each other.

Some things to not that will make a big difference in quality and limitations for this video is that the Insta360 One R 1 Inch Mod was shot using 4k 60 fps while the Sony RX 100 IV was shot using 1080p 60fps. The Insta360 One R 1 Inch Mod has a fixed focus while the Sony RX 100 IV has a variable focus.

Anyway I will let you be the judge and decide which camera you like the look of the video for at least in this shooting situation.

View fullsize

This is by far not a full Review of the Insta360 One R Camera but rather more of my take on the Insta360 One R Camera and what it can do for me and how I plan on using it in by Replica Airguns and Get Fit Over 40 YouTube channels.

View fullsize

I talk about how the Insta360 One R Camera compares to a GoPro type camera and how it can also be much more than a typical action camera because of its ability to morph from one camera to a completely different type of camera because of its modular form factor. Not to mention possible future new hardware lenses and even main modules that could increase the ability of this camera even further.

View fullsize

In this video I show some sample videos I shot using the Insta360 One R Camera with the 4K 60 fps Mod and its 5.3K 30 fps 360 Mod Lenses.

View fullsize

Here are some of the basic Specifications for the Insta360 One R Camera:

Aperture

4K: F2.8

360: F2.0

35mm Equivalent Focal Length

4K: 16.4mm

360: 7.2mm

Photo Resolution

4K: 4000 x 3000 (4:3), 4000 x 2250 (16:9)

360: 6080 x 3040 (2:1)

Video Resolution

4K: 4000x3000@24/25/30fps, 3840x2160@24/25/30/60fps, 2720x1530@24/25/30/60/100fps, 1920x1080@24/25/30/60/120/200fps,

360: 5760x2880@30fps, 5760x2880@24fps, 5760x2880@25fps, 3840x1920@50fps, 3840x1920@30fps, 3008x1504@100fps

Photo Format

4K: jpg, RAW (dng) (RAW files require software on PC/Mac to export.)

360: insp (can be exported via App or Studio), RAW (dng) (RAW files require software on PC/Mac to stitch)

Video Format

4K: insv (can be exported via App or Studio), mp4 (enable in-camera basic stabilization), * The .insv video format has been changed to .mp4 in firmware 1.2.16 and later

360: insv(can be exported via App or Studio), LOG and HDR videos

Video Coding

4K: H.264 / H.265

360: H.264 / H.265

Video Modes

4K: Standard video, HDR video, Timelapse mode, TimeShift mode, Basic stabilization mode (in-camera stabilization), Pro stabilization mode (export with Insta360 app/Studio or supported plugins to apply FlowState stabilization)

360:Standard video, HDR video, Timelapse mode, Bullet Time video

Weight

4K: 121g

360: 130.5g

Dimensions (W x H x D)

4K: 72mm x 48mm x 32.4mm

360: 72mm x 48mm x 43mm

Run Time

4K: 4K@60fps - 70 minutes

360: 5.7K @ 30fps - 70 minutes

Video Bitrate

100Mbps

Gyroscope

6-axis Gyroscope

Compatible Devices

Recommended devices： iOS: A11 or above iOS iPhone SE, iPhone 11/11 Pro/11 Pro Max, iPhone XS/XS Max, iPhone XR, iPhone X, iPhone 8/8 Plus Android: Kirin 980 or above (Huawei Mate20, P30 and above) Qualcomm Snapdragon 845 (Samsung Galaxy S9, Xiaomi Mi 8 and above) Exynos 9810 or above (Samsung S9, S9+, Note9 and above) * Devices that do not meet the above requirements can still use the app to control ONE R, however, some operations with high processing performance requirements such as AI supported functions and video playback, may be sub-optimal.

Photo Modes

Standard photos, HDR photos, Burst, Interval photos, Night Shot, PureShot

Live-streaming

Coming Soon

360 live-streaming, FreeCapture Live (user controls visual perspective)

EV

±4EV

Exposure Modes

Photo Shoot Auto, Manual(Shutter 1/8000s-120s, ISO 100-3200), Shutter Priority(1/8000s-1s), ISO Priority(100-3200) Video Shoot Auto, Manual(Shutter 1/8000 - 1/30, ISO 100-3200)

WB

Auto, 2700K, 4000K, 5000K, 6500K

Bluetooth

BLE4.0

Wi-Fi

5G (Standard range of approximately 20 meters)

USB

Type-C

Micro SD Card

UHS-I V30 speed class, exFAT(FAT64) format SD cards with a max storage of 1T are recommended.

Battery Capacity

1190mAh

Charging Method

Type-C

Charging Time

65mins

Use Environment

-4° F to 104° F (-20℃ to 40℃)

View fullsize

Make sure to watch my Table Top Review for the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol if you haven’t already done so to get all the specifications and features along with some nice close up video. In this Field Test Shooting video I test out the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol to find out what the real world velocity is and also just how accurate it will be shooting a paper target from 30 feet back using a rested shooting position. Since the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol is a target pistol I was hoping for good accuracy since the Diana Chaser performed so well for me in my earlier Field Test Shooting video this week. The Diana Bandit does have a claimed 700 fps velocity but I believe this is for the non-Canada detuned version so it will be interesting to find out exactly what the power is.

First up I placed 5 shots through my Chronograph with a fully charged PCP tank using 6.9 grain RWS lead pellets and got just over 500 fps results averaging 517 fps, so yes the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol has been detuned to make it Canada non-regulated legal.

View fullsize

Next I performed my accuracy test shooting at a paper target 30 feet down range with the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol rested on a sand bag up front and sitting in the back. Since the magazine holds 9 rounds I placed 9 round on the target to see what kind of grouping I could get. At first I was not sure why my 9 shot grouping seemed to be much more spread out than My Dianna Chaser results but after watching the video I saw that only one shot really came out of the 1 inch grouping not including the random accident shot I took. Perhaps I had a misinformed pellet or perhaps I pulled that one shot. That shot aside both the Diana Bandit and Chaser performed about the same, even shooting just a hair to the left from the bullseye.

The trigger feels pretty decent, not super light or to heavy, there is a little bit of take-up and then a slight resistance then a quick release. The bolt action along with the 9 round rotary magazine worked flawlessly for me with no jamming at all. For the low price this PCP Target Pellet Pistol comes in at you really can’t go wrong and if you want to modify or upgrade it down the road there are tons of things you can do to the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol. I highly recommend the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol if you are looking for a super affordable PCP target pellet pistol.

• Buy the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol in Canada