View fullsize

In this Field Test Shooting Video I test out the Umarex T4E HDX .68 Paintball Shotgun to find out what the actual fps is and if .68 Caliber Rubber Balls shot out of this Paintball gun are even going to be somewhat accurate at 30 feet out? If you have not already watched my Table Top Video where I go over the details and specifications with some closer up video showing you around the Umarex T4E HDX .68 Paintball Shotgun then make sure to watch it here…

Starting with the velocity portion of this video I used .68 caliber rubber balls which are not super heavy and not made out of a very hard rubber as you can squish them with your fingers fairly easily. I put 5 rounds through my chronograph after loading a pair of 12 gram CO2 cartriges into the CO2 chamber. My results averaged 206 fps which may seem slower than expected but they did hit my target pretty hard and actually knocked the cardboard backing right off of it. Each round was fairly consistent ranging from 203 to 210 fps.

View fullsize

Moving on to the accuracy portion of this test I proceeded to shoot around 10 rounds into my fresh paper target setup 30 feet down range. My target is basically an 8.5 x 11 sheet of paper and my goal was ot get all my shots onto the paper which I managed successfully. I would say most of the rounds all hit within about 5-6 inches of each other which for a Paintball Gun is very good! Keep in mind I was shooting using a seated position with the Umarex T4E HDX .68 Paintball Shotgun rested up front on a sand bag.

All in all the Umarex T4E HDX .68 Paintball Shotgun performed really well shooting consistent velocities and also getting all the rounds on an 8.5 x 11 inch target easily at 30 feet away which means if you where shooting at a persons body area you would easily hit it every shot making this a decent close quarters shooter which is what it really would be used for at the end of the day. Could you use it for less lethal home defense? I guess so especially if you can get your hands on pepper balls but I am not sure if regular rubber or paintballs balls would stop someone? Just seeing this impressive shotgun may in fact be more of a deterrent then being shot by it, but if it get’s the job done then why not.

• Buy the Umarex T4E HDX .68 Paintball Shotgun in Canada

• Buy the Umarex T4E HDX .68 Paintball Shotgun in the US

View fullsize

Type: Paintball Shotgun.
Manufacturer: Umarex - T4E.
Model: HDX .68 Paintball Shotgun.
Materials: Metal & Polymer.
Weight: 6.8 pounds (3.100 kg).
Barrel: 16.2 inches (411.5mm) Metal smooth bore.
Power Source: 2x12 gram CO2.
Action: Pump Action with Internal Magazine.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 16 Rounds.
FPS: 250-360?

View fullsize

Trigger Pull: The trigger pull on Umarex T4E HDX .68 Paintball Shotgun is a single action only trigger that requires the Pump Action to engage the trigger. Without working the pump the trigger is in the rear portion and does not operate until the Shotgun is pumped, then it pops forward and becomes active. At that point I would say it is fairy short and light, maybe with a little bit of friction but not bad overall. There is also a cross-bolt safety right behind the trigger making it easy to engage and disengage the safety.

Accuracy: So far I have not had the opportunity to test the Umarex T4E HDX .68 Paintball Shotgun but plan a full Field Test Shooting Video shortly. As with most Paintball Airguns they are not going to be super accurate even at 30 feet away. Generally speaking most tests I have done with Paintball guns using rubber balls perform about the same with most of the rubber balls hitting my paper sheet target (8x11) but some even missing completely. In terms of power, on the box Umarex claims 250 fps but I have seen higher velocity specifications on websites including our own so I guess we will find out for sure when I perform my Field Test Shooting Video for the Umarex T4E HDX .68 Paintball Shotgun,

View fullsize

Build Quality: The build quality of the Umarex T4E HDX .68 Paintball Shotgun is very good since this Paintball Shotgun is made for military and law enforcement training use. It has a very good weight and feel to it and has metal parts where you would expect them including the receiver. If you picked this item up along with a real steel Shotgun it would be hard to tell or feel the difference at first inspection.

Realism: The Umarex T4E HDX .68 Paintball Shotgun as far as I know is not an exact replica of any specific Shotgun but it does look like what you would expect to see from a Tactical Styled Pump Action Shotgun. In terms of mechanical working parts everything does what it supposed to do and works as expected.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Pros:

• Expected fairly high fps power of 350+ with .68 caliber paintballs/rubber balls, a bit too high for your average paintball field but perhaps powerful enough to discourage an extruder?

• Lots of mounting option for accessories like a tac light, laser or other sighting option with its upper and lower picatinny rail setup.

• Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.

• Simple to use Cross Bolt Safety.

• Nice high capacity 16 round internal magazine.

• Dual CO2 offers more shots per CO2 change.

• Build quality feels really good, very solid, with lots of weight to it.

• Very intimidating looking, just that alone may scare off an intruder.

View fullsize

Cons:

• Need a tool to load rounds.

• Will not get lots of shots per dual CO2, around 70 or so but not bad.

• A bit on the large and bulky side.

View fullsize

Comments:

I am not sure exactly what one would use this Paintball Rifle for but there are a few options. You could use it on the field but with everyone else using high capacity rapid fire Paintball Guns you might be “Out Gunned” to say the least unless of course everyone else was limited in some way to their ammo capacity and rate of fire. Again the Umarex T4E HDX .68 Paintball Shotgun could be used as a non lethal home defense option when combined with the right ammunition type like say some pepper balls? The look of this Shotgun is probably enough to make an intruder get the heck out but I would not count on it. No matter what you plan to use it for it is an awesome Paintball Airgun for sure but just be aware if is not going to be the cheapest option at around $450 Canadian.

• Buy the Umarex T4E HDX .68 Paintball Shotgun in Canada

• Buy the Umarex T4E HDX .68 Paintball Shotgun in the US

As the title suggest this a video about a Huge Mystery Box so I am not going to say what’s in it, I can say that their are 4 main products mostly rifles per-say. One is a Futuristic Full Auto BB Rifle, one is a Paintball Shotgun, One is an AEG Airsoft Rifle and one is a Replica Break Barrel Pellet Rifle.

So I have a lot of variety here to show everyone! I did absolutely zero research on any of the products I show in this video since like you I had no real idea what was inside other than how many and that most where rifle based.

Enjoy finding out what new products I will be reviewing over the next month with dedicated Table Top and Field Test Shooting videos.

Different Types of Airgun Sights

View fullsize

Sights for guns in general are the same for Airguns as is with real steel guns for the most part and can be mixed and matched with a couple of exceptions. Spring piston rifles for instance are an exception because of the unique vibration the spring makes and how it can damage a standard optical sight, so in this case you’re best to use an optical sight designed for a spring piston Airgun. In most other cases sights can be used on all types of guns.

In this Airgun Sights video I will go over the various types of sights that either come as part of the gun design or can be added afterwards using a rail or mounting system.

Types of Airgun Sights most commonly used.

View fullsize

Iron Sight (Fixed or removable).

Iron Sight (Adjustable).

Iron Sight (White Dot, Fiber Optic).

Come in Post/Notch, Post/Aperture (Peep).

Common on Pistols and Rifles

View fullsize

Laser Sight:

Generally added to a rail or can sometime be integrated into the design of the gun.

Common on both Pistols and Rifles.

View fullsize

Red Dot and Holographic:

Generally not magnified.

Most common on Rifles but can be used on Pistols.

View fullsize

Optical Magnified (Telescopic)

Come in a variety of magnifications for different shooting ranges.

Generally for Rifles but can be used on Pistols.

In this two part video series I compare several Air Pistols to each other to find out what type of round has the most power and accuracy. The guns I use for this not so scientific test are the KWC Model DE /50 Desert Eagle CO2 Blowback 6mm Plastic Airsoft Pistol, the EKOL ES 55 CO2 4.5mm Steel BB Pistol, the Umarex Magnum Research Desert Eagle Blowback CO2 .177 Caliber Pellet Pistol and the Umarex T4E TR50 CO2 .50 Caliber Paintball Pistol.

For this Video 2 Accuracy Test I shoot all of the above listed Airguns at a paper target setup 30 feet down range using a semi rested shooting position with my hands resting on a sand bag up front and seated on a stool in the back. It’s not perfect but works well enough. I didn’t take a ton of time with each gun since there where 4 to shoot in this Field Test Shooting Video so accuracy may have been a bit better if I took a little more time with each gun.

In Video 2 I test the power and penetration of each Airgun option shooting at a pop can, a soup can and a toilet paper roll so make sure to watch that video if you have not already watched it.

• Buy Airguns in Canada

• Buy Airguns in the US

In this two part video series I compare several Air Pistols to each other to find out what type of round has the most power and accuracy. The guns I use for this not so scientific test are the KWC Model DE /50 Desert Eagle CO2 Blowback 6mm Plastic Airsoft Pistol, the EKOL ES 55 CO2 4.5mm Steel BB Pistol, the Umarex Magnum Research Desert Eagle Blowback CO2 .177 Caliber Pellet Pistol and the Umarex T4E TR50 CO2 .50 Caliber Paintball Pistol.

For this Video 1 Power Test I shoot all of the above listed Airguns first at a pop can, then a soup can and then a toilet paper roll. The ides is to test penetration abilities with the pop and soup can and then raw force shooting the toilet paper as it will absorb all the energy from each airgun round and by gauging how much the toilet paper reacts or moves it should tell us which airgun has the most raw power or energy.

In Video 2 I will be testing accuracy using my standard 30 round paper target setup in the Replica Airguns Sea Can so stay posted for that upcoming video shortly…

• Buy Airguns in Canada

• Buy Airguns in the US

In this Replica Airguns Video I talk about the latest Canadian Temporary Handgun Ban What it Means for Airguns. I talk about what I think abut it and what it means for Replica Airguns now and in the future.

Canada puts in place temporary handgun import ban!

From: Global Affairs Canada

News release

August 05, 2022 - Toronto, Ontario - Global Affairs Canada

Canadians deserve to feel safe in their communities. That is why the Government of Canada has a comprehensive plan that gets firearms off our streets and more

resources into our communities. A central part of this is the recently introduced Bill C21. The bill addresses the alarming role of guns in gender based violence, gets tough on organized crime and most significantly introduces a national freeze on the sale,

transfer and ownership of handguns, anywhere in Canada.

The Honourable Mélanie Joly, Minister of Foreign Affairs, and the Honourable Marco Mendicino, Minister of Public Safety, today announced a temporary import ban on the importation of restricted handguns. This will help bring the ultimate impact of the national handgun freeze into force sooner. This temporary ban means that individuals and businesses will no longer be able to import handguns into Canada, subject to narrow exceptions that mirror those in Bill C-21. These restrictions will take effect on

August 19th, 2022, and will last until the national freeze comes into force. No single program or initiative can tackle the challenge of gun violence on its own. That is why Bill C-21 and the national freeze on handguns are two of the many elements in the Government’s comprehensive plan to keep Canadians safe. This begins at our borders, where we’ve added resources to fight smuggling and stop guns from coming into Canada. We’re also investing in prevention programs to tackle the root causes of gun crime and stop it before it starts. Finally, we banned assault-style weapons like AR15s, and will soon begin a buyback program to get these weapons of war out of our communities once and for all.

Quotes

“We know that one Canadian killed by gun violence is one too many. As a government, it is our duty to ensure that Canada remains one of the safest places to live in the world. The import ban announced today will help to keep guns stay off our streets as we work towards implementing Bill C-21, reducing gun violence in the immediate term.

- Mélanie Joly, Minister of Foreign Affairs

“My top priority as Minister is keeping Canadians safe in their communities. Today’s announcement is further proof that we are using all tools at our disposal to fight gun crime in this country. It is a key pillar of our plan to address it, along with investments in prevention, action at our borders, a ban on assault-style weapons and Bill C-21 –Canada’s most significant action on gun violence in a generation.”

- Marco Mendicino, Minister of Public Safety

View fullsize

In this Field Test Shooting Video I test out the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the Indoor Replica Airguns Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I start off by putting 5 rounds through my Chronograph and average the fps, I then I setup a fresh paper target 30 feet down range and put (max amount in the magazine) 8 Paintball rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol then checkout my Table Top Video for that information.

Starting with the Chronograph velocity test Umarex says you can expect around 350 - 400 fps which seems rather high to me based on my other Field Tests with similar .43 caliber Paintball Pistols. Perhaps this is using actual Paintballs whereas I was using rubber balls for my testing to reduce the mess in the Sea Can. I was able to average 300 fps using a brand new CO2 in what I would consider to be about a room temperature conditions which means in warmer situations I am sure we can get even higher than the 300 fps I hit on this day.

View fullsize

For the next portion of the Indoor Field Test I loaded 8 rounds into the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol and carefully placed them into a paper target 30 feet down range. I was using my standard seated position in the back with my hands resting on a sand bag up front which I have found to be fairly stable but there will still be some human factor which can effect overall accuracy. My results where about what I was expecting with a Paintball Pistol shooting Rubber Balls, generally they will spread out a bit at 30 feet and in this Field Test my 8 shot group spread out to about 8 inches or so. They did seem to be well centered on the target as a group and if I was shooting at a human sized torso at that distance I would have hit it every time.

The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another nice addition to the Umarex / T4E lineup up .43 Caliber Replica Paintball Pistols and if you are a Glock owner and want a Paintball Pistol to train with, then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is about as good as you can get, the only other option would be to go with an Umarex Glock Airsoft or BB Pistol but at least we now have a bunch of options depending on your specific needs!

• Buy the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in Canada

• Buy the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the US

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: Glock 17 Gen5
Materials: Metal & Polymer.
Weight: 726 grams (1.6 pounds).
Barrel: Smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 8 Rounds.
FPS: 350-400.

View fullsize

Trigger Pull: The trigger pull on Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger. The internal hammer/striker is engaged from the blowback action reducing the friction on the trigger. In terms of it being similar to a Glock trigger pull it will be a bit heavier and longer but not bad overall.

View fullsize

Accuracy: So far I have not had the opportunity to test the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol out so stay posted for my future Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from it. For now you can watch my Field Test Shooting Video for the Umarex T4E Walther PPQ M2 .43 Caliber Paintball Pistol as it is very similar in design and should for the most part perform about the same.

View fullsize

Build Quality: The build quality of the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol a solid 1.6 pound overall weight with the magazine in. The fit and finish is also very good with virtually no slide wiggle to be found.

View fullsize

Realism: The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is a licensed Glock Replica via Umarex which owns the licensing so you will find Glock licensing and branding throughout this Paintball Pistol. Just looking at the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol you would find it hard to tell the difference between it and the real steel Glock 17 Gen5 but there are some notable differences as in the length of the slide travel which is about half of what you would expect from a real Glock. This is to account for the obvious internal differences to allow for CO2 and paintballs to be used. Overall the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol would make a great training pistol if you are a Glock owner and want to use the closest gun to it.

View fullsize

Pros:

• Really great weight and solid feeling gun.

• Full Metal slide that locks back on the last shot.

• All metal heavy full size drop out magazine adds some additional weight to the gun.

• Good for Glock shooters looking for a training weapon.

• Everything works pretty much like the real gun so again great as a training tool.

• Easy to see white dot sights front and back.

• Working trigger safety.

• Fit and finish is excellent.

• Magazine spring release really shoots the magazine out so be warned!

• .43 caliber barrel opening, adds to realism.

• Fully Glock licensed via Umarex.

• Comes in a ice hard shell case.

View fullsize

Cons:

• Trigger is a bit heavy, not as light as a real Glock, more of a double action trigger in function.

• Magazine only holds 8 rounds, so you are going to need extra magazines for sure.

• Blowback action is not full blowback, more like a typical half blowback BB gun.

View fullsize

Comments:

The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another great addition to the Replica Paintball Pistol options out there and if you are a Glock owner looking for a training gun you can use for some additional trigger time outside of a gun range or want to perform realistic training exercises with live players then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol will fill this need. I am looking forward to testing it out when I make My Field Test Shooting Video as Umarex claims it to have significantly higher fps (350-400) then some of the other replica T4E Paintball guns I have reviewed so far. I guess we will see soon!

• Buy the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in Canada

• Buy the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the US

In this Update Preview Unboxing Video I take a look at 4 newer products that just came across my table and are in our Replica Airguns Online Stores. One is a CO2 Blowback BB Pistol, one is a CO2 .43 Caliber Paintball Pistol and two are GBB Airsoft Pistols, so a rather nice selection for us to take a look at here! I will be following up this Update Preview Unboxing Video with proper Table Top and Field Test Shooting Video to find out all the details and how well they perform.

View fullsize

Sig Sauer 1911 Emperor Scorpion CO2 BB Pistol

• Type: BB PIstol.

• Manufacturer: Sig Sauer.

• Materials: Metal & Polymer.

• Propulsion: 12 gram CO2.

• Caliber: 4.5mm steel BB's.

• Magazine Capacity: 17 rounds.

• FPS up to 300 FPS.

• Action: Semi-auto SAO.

• Overall Length: 8.7 inches.

• Weight: 2.6 pounds.

View fullsize

Umarex T4E Glock 17 Gen5 CO2 Paintball Pistol

• Type: Painball Marker.

• Manufacturer: Distributed by Umarex.

• Materials: Metal & Polymer.

• Propulsion: 12 gram CO2.

• Ammunition Type: Paintballs.

• Magazine Capacity: 8 rounds.

• FPS: 350-400.

• Action: Semi-auto SAO.

• Overall Length: 7.95 inches.

• Weight: 1.6 pounds.

View fullsize

Umarex Glock 19 GBB Airsoft Pistol

• Type: GBB Airsoft Pistols.

• Manufacturer: Distributed by Umarex.

• Materials: Metal & Polymer.

• Propulsion: Green Gas or Propane.

• Ammunition Type: 6mm plastic Airsoft BB's.

• Ammunition Capacity: 19 round drop out full size metal magazines.

• FPS: Claimed 410 with .20 gram Airsoft BB’s (Extended Barrel on).

• Action: Semi auto SAO.

• Overall Length: 7.25 inches.

• Weight: 1.64 pounds.

View fullsize

KJWorks CZ P-09 GBB Airsoft Pistol

• Type: Airsoft Pistols.

• Manufacturer: KJ Works.

• Materials: Metal & Polymer.

• Propulsion: Green Gas or Propane.

• Ammunition Type: 6mm plastic Airsoft BB's.

• Ammunition Capacity: 24 round drop out full size metal magazines.

• FPS: Claimed 370+ with .20 gram Airsoft BB’s (Extended Barrel on).

• Action: Semi auto SAO.

• Overall Length: 8.2 inches.

• Weight: 2 pounds.

View fullsize

I know this is an Airgun channel but when I get something that I feel my audience would be interested I in, I generally share it with everyone. I know many Airgun enthusiasts are interested in Airguns for a few reasons like the lower cost to buy and operate, the fact that there are more situations where you can shoot an Airgun and perhaps availability of these guns in terms of purchasing them without a license and laws pertaining to overall size, barrel lengths, magazine capacities and the likes. My latest acquisition does tick some of these boxes for sure.

View fullsize

My latest “Birthday” purchase was the GSG-16 which is a 22LR rimefire rifle made by www.GermanSportGuns.com and it is sort of an MP5 copy but this version is more like a Frankenstein version of an MP5 combined with an AR-15 in order to make H&K happy. Previous version of the GSG-16 (the GSG-5 and GSG-522) where too similar to the MP5 and so GSG had to make a third version less MP5-ish.

View fullsize

That said the GSG-16 has all the same controls as the MP5 so for training purposes it would be very suitable. Personally I like what GSG did in order to bring the GSG-16 to market without legal ramifications from H&K. I like all the rails and the way it kind of looks a bit more like an AR-15 even if the controls are not the same.

View fullsize

If you do like the MP5 look there are some kits out there for the GSG-16 to turn it back into more of an MP5 looking rifle but for me I don’t need to spend the extra money to be happy with the GSG-16.

No we do not have this item in our Replica Airguns Stores as we really only cater to guns that do not require any sort of lisenceing or permits. The closest thing you can buy I would say would be either the Umarex HK MP5-PDW CO2 BB Rifle, one of the MP5 Airsoft Rifles we have or even the Crosman MPW Blowback CO2 BB Rifle which is more AR based.

View fullsize

This was an unusual Field Test Review for me to do as I really don’t test out Bows or Crossbows all that much and I don’t have the best backstop setup for doing such reviews. So I spent some time making a backstop that was capable of stopping these just over 6 inch almost 10 gram or 150 grain bolts. It required some layers of foam and cardboard along with a blanket behind just in case, and even with this setup the bolts managed to lodge themselves right up to the Fletching (feather part of the arrow). Also make sure to watch my Table Top Video Review for the Bear X Desire XL Crossbow to see it up nice and close and get all the specifications and features.

I kind of wanted to change up this review just a bit and so I recorded my Chronograph Velocity at the same time as I did my Target or Accuracy Test to simplify things. I used 5 bolts in all and got what I felt was a good result using the Bear X Desire XL Crossbow.

In terns of velocity Bear X claims that the Bear X Desire XL Crossbow will shoot around 175 fps. I was able to get consistent 190+ fps readings using the 147 grain 6.5 inch aluminum bolts with my lowest fps being 192 and the highest being 194 so super consistent. This gave an overall Foot Pound energy of 12.4 foot pounds! This is enough for small pests for sure, it really comes down to accuracy at this point as you will want to get either a head or shoulder area shot for a humane kill.

View fullsize

I did do a pre test to make sure I was on target and duding this test I was able to get about a 5 inch 5 shot grouping. During my recored Accuracy Test this did open up a bit as one arrow went high and to the right so if I leave that arrow out of the test I did manage to get another 5 inch grouping with three of the arrows all within 1.5 inches of each otter. I figure with high quality arrows and some practice time using the Bear X Desire XL Crossbow, you should be able to use it for small pest control at least at closer in ranges.

All in all the Bear X Desire XL Crossbow surprised me with how powerful it really was and with the accuracy using standard default bolts. This is for sure not a toy and you would never want to accidentally shoot this at someone as it could cause a very serious injury or even death and I mean that since these arrow would for sure pierce several inches into the body. So if you’re looking for something with a bit more raw power than your standard non-regulated Airgun, then check out the Bear X Desire XL Crossbow over in both our Canada and US Online Replica Airguns Stores.

• Buy the Bear X Desire XL Crossbow in Canada

• Buy the Bear X Desire XL Crossbow in the US

View fullsize

Type: Compact Crossbow.
Manufacturer: Bear X.
Model: Desire XL.
Materials: Metal & plastic.
Weight: 2.3 pounds (1 kilograms).
Length: 20-22 inches.
Propulsion: Bow.
Action: Single action trigger.
Ammunition Type: Aluminum bolts (Comes with 3).
Ammunition Capacity: 1.
FPS: 175fps.
Draw: 60 pounds

View fullsize

Trigger Pull: The trigger pull on the Bear X Desire XL Crossbow is medium to heavy, it is a single action only trigger as you need ot cock the bow in order for the trigger to be engaged. The safety is also engaged when you cock the bow requiring you to take the Bear X Desire XL Crossbow off safe before shooting as an added layer of safety.

View fullsize

Accuracy: I have not made my Field Test Shooting Video for the Bear X Desire XL Crossbow and so I have not sea what to expect for it. I have watched a few videos of other people reviewing it and it looks to perform fairly well but until I get a few bolts in a target downrange I can not say for certain the accuracy of the Bear X Desire XL Crossbow. I will have to figure out some sort of a usable back stop in order to make this Field Test Shooting Video but have some ideas already on material to use as my back stop. FPS is claimed ot be around 175 and I will be doing my best to Chronograph the Bear X Desire XL Crossbow so we can confirm that rating for ourselves…

View fullsize

Build Quality: The Bear X Desire XL Crossbow is actually made pretty decently, yes it is mostly plastic and light weight but feels sturdy enough to hold, the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts and bolts that hold it together are some sort of plastic, the bow itself may be a composite material but I am not sure what exactly it is?

View fullsize

Realism: The Bear X Desire XL Crossbow is not a Replica as is what I usually review here on the channel. But I think their is a crossover in terms of interest for a product like this with people that are also interested in airguns. I know I like the Bear X Desire XL Crossbow and can see a place for it in my collection even if it’s not a replica product.

View fullsize

Pros:

• Fairly inexpensive.

• Super light weight.

• Can shoot in a variety of situations.

• Easy to draw the bow.

• Safety is automatically engaged.

• Picatinny rail already has iron fully adjustable rear sight but can mount a red dot if you like.

• Fiber optic front sight.

• 3 bolts included.

• 175 fps (not sure of the ft/lbs)?

• Comes with fore grip.

• 3 portion adjustable rear but stock.

View fullsize

Cons:

• Will need a good backstop or will lose or damage a lots of bolts.

• Takes a little bit of time to set it up but not too hard if you follow the instructions.

View fullsize

Comments:

The Bear X Desire XL Crossbow is an interesting product that once purchased and if you manage to not lose the bolts will cost virtually nothing to shoot since you can reuse the bolts all day long given you shoot them on target and that target does not damage the bolts. It may not offer the rapid fire action shooting of a replica semi auto CO2 Pistol but still challenges the shooter in terms of getting the best possible accuracy out of it and at the end of the day trigger time is trigger time! If you are looking for something a bit different than your CO2 Air Gun then maybe the Bear X Desire XL Crossbow will fill that requirement.

• Buy the Bear X Desire XL Crossbow in Canada

• Buy the Bear X Desire XL Crossbow in the US

In this Preview Unboxing Vimeo Video I take a look at five very different products! A Spring Piston .177 Caliber Pellet Pistol, an Airsoft GBB Pistol, a Compact Crossbow, a full auto CO2 Blowback BB Pistol and a PPC .22 Caliber Pellet Rifle.

View fullsize

First up is the Umarex Ruger Mark IV Spring Piston Pellet Pistol which is a single shot replica pellet pistol that shoots .177 caliber pellets at up to 320 fps using a spring piston break barrel system. The Umarex Ruger Mark IV Spring Piston Pellet Pistol is a target plinker with fully adjustable fiber optic sights and should be a lot of fun to shoot!

View fullsize

Next I take a look at a Gas Blowback Airsoft Pistol from Action Army that closely resembles the Ruger Mark IV pistol with perhaps a more compact look. The Action Army AAP-01 GBB Airsoft Pistol is full blowback a full size drop out magazine and fiber optic sights. It also come with a threaded barrel and barrel extension for adding a longer barrel and much suppressor.

View fullsize

Next on my list of new items is the Bear X Desire XL Crossbow which is a 2.2 pound compact bolt shooting crossbow that sports a rail system with included adjustable iron sights that also allow for a red dot if you want to really customize it. The Bear X Desire XL Crossbow has a 60 pound draw and shoots arrows/bolts at up to 175 fps.

View fullsize

Another AR BB Rifle/Pistol from Crosman is the Crosman A4-P Full Auto CO2 BB Pistol which is essentially a pistol version of the AR Platform. If you like the Crosman DPMS SBR, R1, PDW then you will probably also like the Crosman AP-4. Like the others it uses dual CO2’s and shoots 4.5mm Steel BB;s in semi or full auto at 1400 rounds per minute until the 25 round magazine is empty.

View fullsize

Last included in this preview video is the Air Venturi Avenger Regulated PCP Pellet Rifle. I’m a bit uncertain about this one as I am pretty sure it is the non detuned PAL version that requires a firearms license here in Canada as it shoots at full velocity (.22 caliber pellet at 950 fps). If that’s the case then it will not be available in our Canada Replica Airguns Store but may be available in the US Replica Airguns Store. If it is the detuned version or a detuned version becomes available in Canada then I imagine we will at some point have it in the Canada replica Airguns Store. That said the Air Venturi Avenger Regulated PCP Pellet Rifle uses compressed air and shoots either .177. .22 or .25 caliber pellets using a latch system and rotary magazine.

After about 4 years or so of not getting sick at all, I was almost starting to think I was impervious to viruses and colds and flues and then it finally happened… I got the Rona.

Now I am not 100% sure if it is the Rona since I have not been tested yet but all signs indicate it’s probably Omicron. I have ordered some antibody tests that I expect to come in shortly, I will be checking my blood for Covid-19 Antibodies once I know my body has had enough time to make them after getting sick this time.

In this video I talk about my symptoms and how I felt start to finish getting the Rona. I can say at least for me it was not big deal, the soar throat was probably the worst of it for me.

View fullsize

Wow, an accessory review, not many of these :) Today I take a look at the Amomax Airsoft Airgun Holster product line since at some point you may want to put your gun in a holster or practice drawing your gun from a holster?

The good news is we just got in a decent amount of product for our Amomax Airsoft Airgun Holsters. Here is a bit of info about Amomax but of course make sure to watch the video as I take a good look at a few of the versions we sell in our Canada and US online Replica Airguns Stores.

View fullsize

Amomax holsters are compatible with 4 different carrying platforms :paddle (standard), belt clip, MOLLE, and drop leg platforms. All the carrying platforms can be replaced by only one screw. Users can carry them in daily use, outdoor sports, normal shooting training and competition. Holster will stay firmly on a belt, leg and MOLLE system even in fast moving situations with a quick release Retention System button that keeps the gun locked in place until you are ready to draw. Holster body and carrying platform are connected with a tooth gear that allows for 360 degrees of rotation. User can easily adjust the carrying position to fit their needs.

View fullsize

Amomax Holsters are currently available in the following versions:

• Glock 17/22/31

• 1911 (Fits most brands 1911’s)

• USP

• Sig P320

• Single and double Universal Magazine

• Buy Amomax Airsoft Airgun Holsters in Canada

• Buy Amomax Airsoft Airgun Holsters in the US

View fullsize

Type: Airgun Accessory.
Manufacturer: Distributed by Air Venturi.
Model: Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank.
Materials: Aluminum.
PSI: 3000.
Capacity: 13 CU.
Output PSI: 1100.
Diameter: 2 inches.
Length: 10 inches.
Features: Two ASTM burst disks, integrated pressure gauge.
Accessories included: Buttstock, CO2 Adapter.

In this Table Top Review Video I go over the features and benefits of the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank system, what to expect and some of the Pros and Cons for it.

I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!

View fullsize

Pros:

• Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.

• Smaller tank means if you are using a foot pump it won’t take all day to fill up :)

• Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.

• Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.

• Not effected by colder temperatures compared to CO2.

• Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.

Cons:

• Still takes a while to pump up using a foot pump system.

• Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.

• Will need access to a pump or compressor to use it.

• Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.

View fullsize

Comments:

I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.

• Buy the in Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank Canada

View fullsize

As with most of the new tech I purchase or acquire that I will be using in my Videos for either my GetFitOver40 or ReplicaAirguns YouTube channels, I generally like to do some sort of a practical review for the item. In this case I take a look at the Synco G1 (A2) Wireless Microphone Set which is a pair of wireless transmitters that pair with a single dedicated receiver allowing me to quickly and easily capture good quality audio for my Videos.

For the past couple of years my go to microphone setup for my video was to use a generic lapel mic connected to my Samsung Galaxy Smartphone recording into an audio program. I would then send the audio file via dropbox to my computer where I would then line up the audio file with the video file in my video editing software to get a much higher quality and more clear voice recording versus what the camera mic would be able to capture.

This system has been working fairly well for me but required a somewhat cumbersome lapel cable and of course my bulky Smartphone in my pocket at all times but did allow me to be as far away from the camera as I wanted without any interference or loss of audio clarity.

View fullsize

After playing around with the Synco G1 (A2) Wireless Microphone System I have determined I will most likely simply be clipping the transmitter onto my shirt without the lavaliere mic plugged in and transmitting the audio into either my Samsung Smartphone or my iPad where I can then again dropbox the audio file to wherever I plan on editing the video.

This video was kind of a test to see how everything sounded in terms of the lapel mic versus the built in mic. What settings to use and how distance effected the audio signal and quality. Unfortunately the lapel mic was a bit close to my voice causing some distortion to occur but you can still hear what I am saying no problem. In the future I would place the lapel mic a bit further away from my voice lower down on my shirt or simply use the built in mic as it was not as sensitive to this distortion and seemed to handle louder volume much better than the lapel mic.

View fullsize

Here are some of the specifications for those that like that sort of info :)

Transmitter (TX )

• Wireless Transmission - Digital 2.4GHz

• RF Frequency Band - 2400-2483.5MHz

• Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

• Latency - 12.5ms

• Mounting - Pocket Clip

• Audio Input - 1/8" / 3.5 mm TRS Mic Input

• Audio Input Level - 1V (0dBV)

• RF Output Power - ＜10mW

• Power Requirement - 3.3V-4.7V

• Battery Type - Built-in Lithium Battery

• Battery Charging Time - 1.5h

• Battery Life - 5h

• Dimensions - 52X42X16mm

• Material - Plastic

• Weight - 35g

Receiver (RX)

• Wireless Transmission - Digital 2.4GHz

• RF Frequency Band - 2400-2483.5MHz

• Approximate RF Sensitivity - -81dBm

• Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

• Latency - 12.5ms

• Mounting - Pocket Clip

• Number of Audio Channels - 2

• Audio Output - 1/8” / 3.5 mm TRS Mic Output - 1/8“ / 3.5 mm TRS Headphone Output

• Gain - 0-4 Level (0 to 8dB)

• Audio Output Level - Line Out: 1V, Monitoring: 25-30mW

• Power Requirement - 3.3V-4.7V

• Battery Type - Built-in Lithium Battery, 400mAh

• Battery Charging Time - 1.5h

• Battery Life - 5h

• Dimensions - 52X42X16mm

• Material - Plastic

• Weight - 35g

Microphone

• Form Factor - Built-in/External Mic

• Sound Field - Mono

• Polar Pattern - Omnidirectional

• Frequency Response - 50Hz-20KHz

• Sensitivity - -40dB (±3 dB, re 1V/Pa at 1KHz)

• Max. Input SPL - 135dB SPL (at 1KHz)

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Make sure to also sign ePetition e-3201 to put a stop to Bill C-21:

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201