Entries in Non Airguns,GBB

Amomax Airsoft Airgun Holster Update Review

No Comments

Wow, an accessory review, not many of these :) Today I take a look at the Amomax Airsoft Airgun Holster product line since at some point you may want to put your gun in a holster or practice drawing your gun from a holster?

The good news is we just got in a decent amount of product for our Amomax Airsoft Airgun Holsters. Here is a bit of info about Amomax but of course make sure to watch the video as I take a good look at a few of the versions we sell in our Canada and US online Replica Airguns Stores.

Amomax holsters are compatible with 4 different carrying platforms :paddle (standard), belt clip, MOLLE, and drop leg platforms. All the carrying platforms can be replaced by only one screw. Users can carry them in daily use, outdoor sports, normal shooting training and competition. Holster will stay firmly on a belt, leg and MOLLE system even in fast moving situations with a quick release Retention System button that keeps the gun locked in place until you are ready to draw. Holster body and carrying platform are connected with a tooth gear that allows for 360 degrees of rotation. User can easily adjust the carrying position to fit their needs.

Amomax Holsters are currently available in the following versions:

  • Glock 17/22/31

  • 1911 (Fits most brands 1911’s)

  • USP

  • Sig P320

  • Single and double Universal Magazine

Categories: Accessory, Airsoft, BB, Non Airguns, Paintball, Pistol, Review, YouTube Video Tags: Glock, Amomax, Sig, 1911, H&K USP, HK USP, Sig Sauer

EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol Field Test Review

No Comments

In this Field Test Shooting Video I put the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol through its paces to see how well it performs in the Replica Airguns Indoor Sea Can Airgun Shooting Range. I first place 5 rounds through the chronograph to see what the actual real world velocity is and then I shoot 10 rounds on my paper target 30 feet downrange to see how tight of a grouping I can get with it.

For my Chronograph Test I was using .25 gram Airsoft BB’s so the velocity will be a little bit under the claimed 370 using .20 gram Airsoft BB’s. The temperature was average, not hot or cold so right around room temperature. My 5 shot sting resulted in an average of 312 fps so I would guesstimate an additional 50-60 fps using the .20 gram BB’s since the Airsoft BB’s I was using where ab out 20% heavier than what was claimed. So 370 is for sure possible with the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol.

Going onto my accuracy test, again I used the same .25 gram Airsoft BB’s and placed 10 rounds back to back into my fresh paper target setup 30 feet away. As usually I had my hands resting on a sand bag up front and I was sitting in the back which helps get a fairly stable shooting position but not without some human factor involved. I did manage to place 4 rounds right inside the 1.5 inch bullseye but 6 did come out with my last shot being a bit of a flyer hitting rather low on the target. If I removed the flyer form the equation the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol did mange to shoot a 3 inch grouping. I do feel I can do better with this Airsoft pistol when I dial in the right Airsoft BB’s, hop-up and of course get a bit more use to shooting it.

All things considered, I really like the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol! It has one of the best triggers I have ever reviewed with a nice combination of short take up and light predictable trigger release. The blowback action is fast yet not overwhelming and the overall feel of shooting this gun is very satisfying. Make sure to also checkout my Table Top Video Review for the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol where I go into more details about the specifications and features along with some nice close up video.

Categories: 6mm, Airsoft, Blowback, Field Test, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: EMG, TTI, STI 2011, STI, Combat Master, John Wick

EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol Table Top Review

No Comments

Type: GBB Airsoft Pistol.
Manufacturer: Made by EMG.
Model: TTI STI 2011 Combat Master.
Materials: Aluminum & polymer components.
Weight: 2.4 pounds (1100 grams).
Barrel: 5 inches (127mm) metal non-rifled.
Propulsion: Green gas.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 28 round drop out full size metal magazine.
FPS: Claimed 370.

Trigger Pull: The single action only trigger pull on the EMG TTI STI 2011 Combat Master is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, at least up there with the best for sure!

Accuracy: At this point I have not shot the EMG TTI STI 2011 Combat Master so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will ahed to wait till I perform my Field Test Shooting Video coming up shortly…

Build Quality: The EMG TTI STI 2011 Combat Master is for the most part an all metal gun with a CNC Machined Aluminum Slide and metal slide along with mostly ,metal parts throughout. The guide rod is stainless steel and the barrel is also aluminum with an anodized rose gold finish. The fit and finish is awesome on the EMG TTI STI 2011 Combat Master with attention to detail everywhere. The only plastic I could find on this Airsoft pistol would be the grips and the skeletonized trigger.

Realism: The EMG TTI STI 2011 Combat Master is based off of the STI 2011 but is really a replica of the John Wick pistol used in the John Wick 3 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped.

Pros:

  • Super crisp, light and short SAO trigger.

  • Fit and finish is excellent, very little slide wiggle.

  • Extremely close replica of the custom STI 2011 pistol used in the John Wick 3 movie.

  • Rear sight is fully adjustable and is not too bulky.

  • Fiber optic front sight helps with quick targets acquisition.

  • CNC machined two tone Aluminum slide with metal frame.

  • Rose Gold barrel looks great!

  • Full size high capacity 28 round double stack metal magazine.

  • Ambidextrous thumb safeties.

  • Working grip safety as you would expect on a 1911 based gun.

  • Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.

  • Super crisp and fast blowback action, great for action shooting.

  • Licensing all over this gun true to the real steel version..

Cons:

  • Comes with the red tip but can be remove pretty easily.

  • Need a tool to remove the two part guide rod and barrel (don’t lose the screw!).

  • No dot’s on the rear sight.

Comments:

The EMG TTI STI 2011 Combat Master has got to be one of the most gorgeous and sticking Airsoft Pistols I have reviewed so far. Just everything about this pistol looks and feel great. For a $299 Canadian Pistol you get a really well made high quality product that will be a collectors item to own for years to come. It’s not a small or light gun but for it’s size it feels really well balanced in the hand but for those with small hands it may be a bit too much of a handful. If you see them in stock on our website, make sure to grab one while you can!

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: EMG, TTI, STI, Combat Master, STI 2011, John Wick

Air Venturi HPA Tank - KJWorks M9A1 GBB - EMG Combat Master - Crosman P1 - ASG TAC-6 Update Preview Video

No Comments

In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.

First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.

  • 13 Oz Aluminum

  • 10 Inches Long

  • 2 Inches Diameter

  • Integrated Pressure Gauge

  • Includes Buttstock

  • CO2 Adaptor Included

  • 3000 PSI Fill

  • 1100 PSI Regulated

Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 370 fps

  • 25 Round Magazine

  • 2 Pounds

Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 9.4 Inches

  • 366 fps

  • 28 Round Magazine

  • 2.4 Pounds

Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.

  • 4.5 mm Steel BB’s

  • CO2 x 1

  • 4.2 Inch Barrel

  • 330 fps

  • 19 Round Magazine

  • 2.4 Pounds

  • Comes with Laser Sight

Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.

  • 6mm Airsoft BB’s

  • CO2 x 1

  • 36 Inches

  • 440 fps

  • 15 Round Magazine

  • 3.5 Pounds

Categories: 4.5mm / .177 cal, 6mm, Accessory, Airsoft, BB, Blowback, Bulk Air, CO2, Gas, GBB, PCP, Pistol, Replica Airguns News, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, KJWorks, M9A1, EMG, Combat Master, Crosman, Crosman P1, ASG, TAC-6

Synco G1 (A2) Wireless Microphone Set Review

No Comments

As with most of the new tech I purchase or acquire that I will be using in my Videos for either my GetFitOver40 or ReplicaAirguns YouTube channels, I generally like to do some sort of a practical review for the item. In this case I take a look at the Synco G1 (A2) Wireless Microphone Set which is a pair of wireless transmitters that pair with a single dedicated receiver allowing me to quickly and easily capture good quality audio for my Videos.

For the past couple of years my go to microphone setup for my video was to use a generic lapel mic connected to my Samsung Galaxy Smartphone recording into an audio program. I would then send the audio file via dropbox to my computer where I would then line up the audio file with the video file in my video editing software to get a much higher quality and more clear voice recording versus what the camera mic would be able to capture.

This system has been working fairly well for me but required a somewhat cumbersome lapel cable and of course my bulky Smartphone in my pocket at all times but did allow me to be as far away from the camera as I wanted without any interference or loss of audio clarity.

After playing around with the Synco G1 (A2) Wireless Microphone System I have determined I will most likely simply be clipping the transmitter onto my shirt without the lavaliere mic plugged in and transmitting the audio into either my Samsung Smartphone or my iPad where I can then again dropbox the audio file to wherever I plan on editing the video.

This video was kind of a test to see how everything sounded in terms of the lapel mic versus the built in mic. What settings to use and how distance effected the audio signal and quality. Unfortunately the lapel mic was a bit close to my voice causing some distortion to occur but you can still hear what I am saying no problem. In the future I would place the lapel mic a bit further away from my voice lower down on my shirt or simply use the built in mic as it was not as sensitive to this distortion and seemed to handle louder volume much better than the lapel mic.

Here are some of the specifications for those that like that sort of info :)

Transmitter (TX )

  • Wireless Transmission - Digital 2.4GHz

  • RF Frequency Band - 2400-2483.5MHz

  • Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

  • Latency - 12.5ms

  • Mounting - Pocket Clip

  • Audio Input - 1/8" / 3.5 mm TRS Mic Input

  • Audio Input Level - 1V (0dBV)

  • RF Output Power - <10mW

  • Power Requirement - 3.3V-4.7V

  • Battery Type - Built-in Lithium Battery

  • Battery Charging Time - 1.5h

  • Battery Life - 5h

  • Dimensions - 52X42X16mm

  • Material - Plastic

  • Weight - 35g

Receiver (RX)

  • Wireless Transmission - Digital 2.4GHz

  • RF Frequency Band - 2400-2483.5MHz

  • Approximate RF Sensitivity - -81dBm

  • Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

  • Latency - 12.5ms

  • Mounting - Pocket Clip

  • Number of Audio Channels - 2

  • Audio Output - 1/8” / 3.5 mm TRS Mic Output - 1/8“ / 3.5 mm TRS Headphone Output

  • Gain - 0-4 Level (0 to 8dB)

  • Audio Output Level - Line Out: 1V, Monitoring: 25-30mW

  • Power Requirement - 3.3V-4.7V

  • Battery Type - Built-in Lithium Battery, 400mAh

  • Battery Charging Time - 1.5h

  • Battery Life - 5h

  • Dimensions - 52X42X16mm

  • Material - Plastic

  • Weight - 35g

Microphone

  • Form Factor - Built-in/External Mic

  • Sound Field - Mono

  • Polar Pattern - Omnidirectional

  • Frequency Response - 50Hz-20KHz

  • Sensitivity - -40dB (±3 dB, re 1V/Pa at 1KHz)

  • Max. Input SPL - 135dB SPL (at 1KHz)

Categories: Review, YouTube Video, Non Airguns Tags:

Outside Shooting the G&G SMC-9 with Insta360 Camera Mounted to it

No Comments

It was a decent day today, not too cold and not raining at least at the time I and ethics video :) I figured with my new Insta60 One R and iVUE Vista cameras it would be a great day to test them out outside shooting with my G&G SMC-9 Full Auto Airsoft Carbine. I like the bak for more regulated Indoor Field Tests, these outside usually clay pigeon shooting videos are a lot more fun and I think a nice break for everyone.

So in this video I have three cameras rolling and switch camera switch back and forth throughout the video to make the experience more immersive. I have cameras setup front and back (Sony RX100 IV in front & Sony HDR-AS15 Back), along with my iVUE camera glasses and my Insta360 One R mounted to the barrel of my G&G SMC-9. All in all I think the video turned out well. It may be time to upgrade my Sony Action Camera as it is probably the oldest camera in my collection and you can see in the video it does not look as good as the other cameras.

Categories: 6mm, Airsoft, Blowback, Field Test, Full Auto, Full Auto Fun, GBB, Gas, Pistol, Rifle, Semi Auto, YouTube Video Tags: Insta360 One R, iVUE Vista, G&G SMC9, G&G

Bill C-21 Let's All Make Some Waves

1 Comment

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Categories: Airgun News, Airsoft, Airsoft News, Blank Gun News, Blank Gun, BB, Gun Law, Gun Safety, Non Airguns, Paintball, Pellet, Pistol, Real Gun, Replica Airguns News, Revolver, Rifle, YouTube Video Tags: Bill C-21

Insta360 One R 1 Inch Mod versus Sony RX 100 IV

No Comments

In this YouTube Video I test out my new Insta360 One R with the 1 Inch Mod, comparing it to my Sony RX 100 IV to see how they compare against each other.

It’s not really a fair comparison since my Sony RX 100 IV is now 5 or 6 years old which is a long time for a digital camera but it has been really good to me and provided some really great quality video over the years. Compare that to the Insta360 One R that is about a year on the market now and you would think the clear winner would be the Insta360 One R.

On it’s own the Insta360 One R with the standard 4k lens would perform well against the Sony RX 100 IV but the Sony RX 100 IV has a 1 inch sensor allowing it to get the most out of each pixel and since I primarily shoot in 1080p 60 frames per second I need to get as much out of each pixel as I can.

One really great feature about the Insta360 One R is that it is modular so I can swap the 4k module out for a 5.7 k 360 module or even a 1 inch 5.3k module allowing both the Insta360 One R and the Sony RX 100 IV to have that large 1 inch sensor keeping the comparison more inline with each other.

Some things to not that will make a big difference in quality and limitations for this video is that the Insta360 One R 1 Inch Mod was shot using 4k 60 fps while the Sony RX 100 IV was shot using 1080p 60fps. The Insta360 One R 1 Inch Mod has a fixed focus while the Sony RX 100 IV has a variable focus.

Anyway I will let you be the judge and decide which camera you like the look of the video for at least in this shooting situation.

Categories: YouTube Video, Non Airguns Tags: Insta360 One R

G&G SMC-9 GBB Airsoft Carbine Field Test Review

No Comments

In this Field Test Shooting Video I test out the G&G SMC-9 GBB Airsoft Carbine in the Replica Airguns Indoor Sea Can Airgun Shooting Range to see if the real world performance matches the manufacturers claims. I first place 5 rounds through my Chronograph using .25 gram Airsoft BB’s with a fully gassed up extended magazine to find out what the actual FPS is. I then shoot 10 rounds from a seated and rested shooting position into a fresh paper target setup 30 feet down range to see just what we can expect and then just for fun I shoot the 40 rounds left in the 50 round magazine in full auto to see how this also effects accuracy.

Starting with my Chronograph test, the G&G SMC-9 GBB Airsoft Carbine averaged 339 FPS with the fastest shot recorded at 350 fps and the slowest being 324 fps, so very consistent in terms of sustained fps during my Chronograph velocity testing. The velocity was a bit under the claimed 366-375 fps but I was using slightly heavier BB’s and it wasn’t super warm temperatures in the Sea Can on this testing day, around room temperature, (20 degrees Celsius or 68 degrees Fahrenheit).

Moving onto the accuracy testing for the G&G SMC-9 GBB Airsoft Carbine, it performed pretty decent shooting about a 10 round 4 inch grouping but if I removed two flyers top and bottom the grouping would have been loser to 1.5 inches. The grouping was well centered on the target but I did adjust the sights up a bit as initially out of the box the G&G SMC-9 GBB Airsoft Carbine was shooting fairly low at 30 feet out. The good news is the G&G SMC-9 GBB Airsoft Carbine has fully adjustable sights for windage and elevation along with the 120 clicks of hop-up adjustment. When it came to my full auto testing I found I was shooting really low, perhaps from the blowback recoil pushing me of target? This was the case at least when I did a 40 round mag dump. When I performed the test using shorter bursts I was able to keep more rounds centered on the target for sure but accuracy in full auto was not nearly as good as in semi auto because of the heavy blowback.

Over all the G&G SMC-9 GBB Airsoft Carbine performed decent for me, the velocity was bang on right around what is claimed by G&G allowing this GBB Airsoft Carbine to shoot targets at further out ranges. Accuracy in semi auto was also very good but again shooting in full auto will take a bit more of your attention keeping the blowback recoil under control, for this reason burst fire in full auto will give you better accuracy which is more than likely how you would be shooting the G&G SMC-9 GBB Airsoft Carbine anyways. I really like the diversity you get with the G&G SMC-9 GBB Airsoft Carbine and if you are into Gas Blowback Airsoft guns, then I feel you get similar performance to an AEG but with a lower capacity magazines, but then again I may just have to get my hands on a drum magazine for the G&G SMC-9 GBB Airsoft Carbine and see how that changes things.

Categories: 6mm, Airsoft, Blowback, Field Test, Full Auto, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video, Rifle Tags: G&G, G&G SMC9

G&G SMC-9 GBB Airsoft Carbine Table Top Review

No Comments

Type: Gas Blowback Airsoft Carbine.
Manufacturer: G&G
Model: SMC-9
Materials: Metal/Aluminum & Polymer.
Weight: 4.7 pounds (2125 grams).
Length: 410/620mm folded/unfolded length
Hop-up: Yes - 120 click adjustment.
Propulsion: Green gas or propane.
Action: Semi & Full Auto Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 50 rounds.
FPS: 366-375 fps.

Trigger Pull: The trigger pull on the G&G SMC-9 GBB Airsoft Carbine is typical single action only with a soft short take-up and light release point. I would not call this a crips trigger since it does have a rather spongy feel to it but this is only noticeable when you are easing the trigger slowly. In reality you will be engaging the trigger quickly when shooting it on the field and won’t notice any of the creep or take-up. I would consider it to be a decent trigger pull over all.

Accuracy: I have not done my actual Field Test Shooting video review for the G&G SMC-9 GBB Airsoft Carbine but as with most of my Full auto Airguns I find it hard not resist going outside and blasting off at least one magazine in full auto. Of course this was the case with the G&G SMC-9 GBB Airsoft Carbine and I can tell you I went through all 50 rounds in not time and the G&G SMC-9 GBB Airsoft Carbine rounds went exactly where I pointed the gun short and long range so I expect my Field Test Shooting video to produce good results.

Build Quality: The G&G SMC-9 GBB Airsoft Carbine feels amazing in the hand with a lot of metal going on in the upper Carbine conversion kit portion, the front rail assembly is CNC Aluminum and the Pop-up iron sights are actually metal. The rear fold out stock is plastic but it is sold and just like the rest of the G&G SMC-9 GBB Airsoft Carbine very well made with great fit and finish. Of course the lower polymer frame is from the G&G GTP9 and just like all of the G&G pistols is very well made.

Realism: The G&G SMC-9 GBB Airsoft Carbine genuinely feels like a real steel firearm when holding it in the hand. Shooting it feels much the same but obviously with a lot less recoil than a powder burner. Just like a real steel 9mm Carbine the G&G SMC-9 GBB Airsoft Carbine mechanically works virtually the same with working slide catch release, charging handles, magazine release, and duel safeties, all ambidextrous by the way. As expected you can fully field strip the G&G SMC-9 GBB Airsoft Carbine.

Available in the: Replica Airguns Store

Pros:

  • Lots of metal parts giving the G&G SMC-9 GBB Airsoft Carbine really good weigth and feel.

  • Fold out stock sits nice and tight using magnets when not in use.

  • Integrated QD sling swivel.

  • Comes with two different sized Back-straps to accommodate small and larger hands.

  • Super high capacity extended 50 round magazine that holds a ton of gas for consistent power and lots of shots per fill.

  • Converts the standard GTP9 semi auto pistol into a full auto Carbine.

  • Almost everything is ambidextrous.

  • CNC 20mm / MLOK  Rail for lots of accessories options.

  • Actual metal pop-up fully adjustable sights.

  • Easy to adjust hop-up without disassembly.

  • Dual safety system, cross bolt on frame and trigger safety.

Cons:

  • Fold out stock is not adjustable which makes the sights are a bit tight.

  • Does not come with the pistol slide if you want to covert it back to the GTP9.

Comments:

I am a big fan of the full line of G&G Airsoft guns and so far their GBB pistol lineup has been a treat to review, adding their new G&G SMC-9 GBB Airsoft Carbine to the lineup for me is the perfect mix between their GBB Pistol lineup and their mostly AEG Rifle lineup. I am hoping to see if I can acquire the drum magazine and eventually see how that works with the G&G SMC-9 GBB Airsoft Carbine, for now the 50 round extended magazine will have to do. Really looking forward to testing out the G&G SMC-9 GBB Airsoft Carbine so stay posted for those results shortly!

My YouTube Table Top Review of the G&G SMC-9 GBB Airsoft Carbine:

Categories: 6mm, Airsoft, Blowback, Full Auto, Gas, GBB, Pistol, Review, Rifle, Semi Auto, YouTube Video Tags: G&G, G&G SMC9

Insta360 One R Camera Review

No Comments

This is by far not a full Review of the Insta360 One R Camera but rather more of my take on the Insta360 One R Camera and what it can do for me and how I plan on using it in by Replica Airguns and Get Fit Over 40 YouTube channels.

I talk about how the Insta360 One R Camera compares to a GoPro type camera and how it can also be much more than a typical action camera because of its ability to morph from one camera to a completely different type of camera because of its modular form factor. Not to mention possible future new hardware lenses and even main modules that could increase the ability of this camera even further.

In this video I show some sample videos I shot using the Insta360 One R Camera with the 4K 60 fps Mod and its 5.3K 30 fps 360 Mod Lenses.

Here are some of the basic Specifications for the Insta360 One R Camera:

Aperture

4K: F2.8

360: F2.0

35mm Equivalent Focal Length

4K: 16.4mm

360: 7.2mm

Photo Resolution

4K: 4000 x 3000 (4:3), 4000 x 2250 (16:9)

360: 6080 x 3040 (2:1)

Video Resolution

4K: 4000x3000@24/25/30fps, 3840x2160@24/25/30/60fps, 2720x1530@24/25/30/60/100fps, 1920x1080@24/25/30/60/120/200fps,

360: 5760x2880@30fps, 5760x2880@24fps, 5760x2880@25fps, 3840x1920@50fps, 3840x1920@30fps, 3008x1504@100fps

Photo Format

4K: jpg, RAW (dng) (RAW files require software on PC/Mac to export.)

360: insp (can be exported via App or Studio), RAW (dng) (RAW files require software on PC/Mac to stitch)

Video Format

4K: insv (can be exported via App or Studio), mp4 (enable in-camera basic stabilization), * The .insv video format has been changed to .mp4 in firmware 1.2.16 and later

360: insv(can be exported via App or Studio), LOG and HDR videos

Video Coding

4K: H.264 / H.265

360: H.264 / H.265

Video Modes

4K: Standard video, HDR video, Timelapse mode, TimeShift mode, Basic stabilization mode (in-camera stabilization), Pro stabilization mode (export with Insta360 app/Studio or supported plugins to apply FlowState stabilization)

360:Standard video, HDR video, Timelapse mode, Bullet Time video

Weight

4K: 121g

360: 130.5g

Dimensions (W x H x D)

4K: 72mm x 48mm x 32.4mm

360: 72mm x 48mm x 43mm

Run Time

4K: 4K@60fps - 70 minutes

360: 5.7K @ 30fps - 70 minutes

Video Bitrate

100Mbps

Gyroscope

6-axis Gyroscope

Compatible Devices

Recommended devices: iOS: A11 or above iOS iPhone SE, iPhone 11/11 Pro/11 Pro Max, iPhone XS/XS Max, iPhone XR, iPhone X, iPhone 8/8 Plus Android: Kirin 980 or above (Huawei Mate20, P30 and above) Qualcomm Snapdragon 845 (Samsung Galaxy S9, Xiaomi Mi 8 and above) Exynos 9810 or above (Samsung S9, S9+, Note9 and above) * Devices that do not meet the above requirements can still use the app to control ONE R, however, some operations with high processing performance requirements such as AI supported functions and video playback, may be sub-optimal.

Photo Modes

Standard photos, HDR photos, Burst, Interval photos, Night Shot, PureShot

Live-streaming

Coming Soon

360 live-streaming, FreeCapture Live (user controls visual perspective)

EV

±4EV

Exposure Modes

Photo Shoot Auto, Manual(Shutter 1/8000s-120s, ISO 100-3200), Shutter Priority(1/8000s-1s), ISO Priority(100-3200) Video Shoot Auto, Manual(Shutter 1/8000 - 1/30, ISO 100-3200)

WB

Auto, 2700K, 4000K, 5000K, 6500K

Bluetooth

BLE4.0

Wi-Fi

5G (Standard range of approximately 20 meters)

USB

Type-C

Micro SD Card

UHS-I V30 speed class, exFAT(FAT64) format SD cards with a max storage of 1T are recommended.

Battery Capacity

1190mAh

Charging Method

Type-C

Charging Time

65mins

Use Environment

-4° F to 104° F (-20℃ to 40℃)

Categories: Review, Replica Airguns News, YouTube Video, Non Airguns Tags: Insta360 One R

G&G Piranha MK I & TR GBB Airsoft Pistol Field Test Review

No Comments

In this Field Test Shooting Video I test out the G&G Piranha MK I & TR GBB Airsoft Pistols in the Replica Airguns Indoor Sea Can Airgun Shooting Range to see what the real world performance is for these very similar Airsoft Pistols. I first place 5 rounds through my Chronograph for each Airsoft Gun using .25 gram Airsoft BB’s with fully gassed up magazines to find out what the actual fps velocity is. I then shoot 10 rounds from a seated and rested shooting position into fresh paper targets setup 30 feet down range to see just what we can expect in terms of accuracy from the G&G Piranha series.

Starting with my Chronograph test, a placed 5 rounds through my Chronograph with both the G&G Piranha MK I and G&G Piranha TR GBB Airsoft Pistols. Technically they should have performed nearly identical but not all guns are setup exactly the same out of the box and so the G&G Piranha MK I GBB Airsoft Pistol did shoot a bit hotter than the G&G Piranha & TR GBB Airsoft Pistol averaging 290 fps versus 257 fps. As a quick test I placed the magazine from the MK I into the TR and the G&G Piranha TR GBB Airsoft Pistol did shoot much hotter and very close to the G&G Piranha MK resultsI. I would assume the valves in these magazines where perhaps not letting out the same amount of Gas hence the difference in velocity. The velocity was well under the claimed 370+but I was using slightly heavier BB’s and it was a little cold in the Sea Can on this testing day, not quite room temperature. Around 19 degrees Celsius or 66 degrees Fahrenheit.

Moving onto the accuracy testing for the G&G Piranha MK I & TR GBB Airsoft Pistols, they performed pretty well shooting 10 round 2 inch groupings with both Airsoft Pistols shooting on the money vertically while the G&G Piranha MK I shot a bit to the left and the G&G Piranha TR shooting well centered all around.

All in both of the G&G Piranha MK I & TR GBB Airsoft Pistols performed good for me, I would have liked to have seen the fps higher since both guns where well under the claimed 370+ fps but for close quarter shooting you should have no problem with either of them and again maybe your magazine will shoot a bit hotter than mine did. The partial blowback action is snappy and quick with just enough recoil action to give that realistic shooting experience. The triggers on the G&G Piranha MK I & TR GBB Airsoft Pistols are really nice allowing for quick tight followup shots and again if you like the look and feel of a Glock but perhaps want something a bit more unique then you will want to consider one of the G&G Piranha series Airsoft Pistols know doubt.

Categories: 6mm, Airsoft, Blowback, Comparison, Field Test, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: G&G, Pirahna MK-1, Piranha TR

G&G GPM92 GP2 GBB Airsoft Pistol Field Test Review

No Comments

In this Field Test Shooting Video I test out the G&G GPM92 GP2 GBB Airsoft Pistol in the Replica Airguns Indoor Sea Can Airgun Shooting Range to see what the real world performance is for this Beretta 92 styled G&G Airsoft Pistol. I first place 5 rounds through my Chronograph using .25 gram Airsoft BB’s with a fully gassed up magazine to find out what the actual FPS is. I then shoot 10 rounds from a seated and rested shooting position into a fresh paper target setup 30 feet down range to see just what we can expect in terms of accuracy from the G&G GPM92 GP2 GBB Airsoft Pistol.

Starting with my Chronograph test, the G&G GPM92 GP2 GBB Airsoft Pistol averaged 275 FPS with the fastest shot recorded at 278 FPS and the slowest being 274 FPS, so very consistent in terms of sustained FPS doing my testing. The velocity was well under the claimed 366 but I was using slightly heavier BB’s and it was a little cold in the Sea Can on this testing day, not quite room temperature. Around 19 degrees Celsius or 66 degrees Fahrenheit.

Moving onto the accuracy testing for the G&G GPM92 GP2 GBB Airsoft Pistol, it performed pretty decent shooting about a 10 round 1.5 inch grouping if I removed one flyer that pulled a bit to the left. The grouping was a little bit low but well centered left and right so even though the sights are none adjustable I should be able to pull up the shot placement a bit using the hop-up adjustment.

All in all the G&G GPM92 GP2 GBB Airsoft Pistol performed well for me, I would have liked to see the FPS just a bit higher but for close quarter shooting you should have no problem with it. The blowback action is nice and firm and the typical Beretta single and double action trigger is true to form allowing for a round in the pipe with the hammer safely decocted but ready to go with a quick release of the safety and a double action pull of the first round. The G&G GPM92 GP2 GBB Airsoft Pistol may be a bit bulky and heavy for some smaller handed shooter so keep that in mind.

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video, Field Test Tags: G&G, GPM92, GPM92 GP2

G&G Piranha TR GBB Airsoft Pistol Table Top Review

No Comments

Type: Gas Blowback Airsoft Pistol.
Manufacturer: G&G
Model: Piranha TR
Materials: Metal & Polymer.
Weight: 1.5 pounds (670 grams).
Length: 7.8 inches total
Barrel: 4.01 inches, Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 25rounds.
FPS: 370+ fps.

Trigger Pull: The trigger pull on the G&G Piranha TR GBB Airsoft Pistol is typical single action only with a easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for quick semi auto shooting with the G&G Piranha TR GBB Airsoft Pistol making it a great fast action shooter with quick target acquisition between shots.

Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha TR GBB Airsoft Pistol but I expect it to perform similar to most G&G Blowback Gas Operated Airsoft Pistols and shoot consistently in the mid 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I hope to confirm these predictions in the Sea Can indoor Airgun Shooting Range.

Build Quality: Like most off theG&G Airsoft guns, the G&G Piranha TR GBB Airsoft Pistol build quality is really nice. Fit and finish are excellent with virtually zero slide wiggle, you can also get the G&G Piranha TR GBB Airsoft Pistol in a two tone stainless slide and chrome finish barrel that looks really sharp. It also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust using a special tool without taking the Airsoft gun apart.

Realism: The G&G Piranha TR GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share looks, size and feel to that of the Glock but perhaps with an even more modernized look to it. You will find realistic function to the G&G Piranha MK I GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be easily and quickly field stripped.

Available in the: Replica Airguns Store

Pros:

  • Good balance of metal and plastic for a balanced and light feel.

  • Partial slide Blowback operation should allow for even better gas performance and snappy operation.

  • Ceramic Whirl Cylinder Valve should expect to get decent amount of shots per green gas fill.

  • White dot sights front and back.

  • Nice two tone slide.

  • Has a working trigger safety.

  • Smaller spit grip perfect for people smaller hands.

  • Comes with hard shell case.

  • New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.

  • Dual 20mm top and bottom Rails for accessories.

  • Comes in all black and two tone black and sliver.

  • Comes with high quality speed loader

  • Threaded barrel tip for add on mock suppressor.

Cons:

  • Sights are non adjustable.

  • Not an actual replica of any specific gun I know of but does share some Glock attributes.

  • No actual frame safety other than the trigger safeties, (not always a bad thing).

Comments:

Overall I really like the new G&G Piranha TR GBB Airsoft Pistol, it has a really modern look to it yet has a familiar feel. The G&G Piranha TR GBB Airsoft Pistol is fairly light weight with that quick and snappy partial slide allowing for very quick follow up shots. Combine all of that with the new Gas saving Ceramic Whirl Cylinder Valve I expect the G&G Piranha TR GBB Airsoft Pistol to perform really well when in action. I like that you have the option of the more subdued all black version or if you like your guns to be a little bit more flashy you can also get it in the two tone with black and stainless version. The TR version over MK 1 does allow for optics on top which personally would not be my choice for this gun but it’s nice that you have this option.

My Table Top Review Video of the G&G Piranha TR GBB Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: G&G, Piranha TR

G&G Piranha MK I GBB Airsoft Pistol Table Top Review

No Comments

Type: Gas Blowback Airsoft Pistol.
Manufacturer: G&G
Model: Piranha MK I
Materials: Metal & Polymer.
Weight: 1.5 pounds (670 grams).
Length: 7.8 inches total
Barrel: 4.01 inches, Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 25rounds.
FPS: 370+ fps.

Trigger Pull: The trigger pull on the G&G Piranha MK I GBB Airsoft Pistol is typical single action only with a easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for some pretty quick semi auto shooting with the G&G Piranha MK I GBB Airsoft Pistol making it a great fast action shooter.

Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha MK I GBB Airsoft Pistol but I expect it to perform similar to most G&G Blowback Gas Operated Airsoft Pistols and shoot consistently in the mid 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I will confirm these predictions.

Build Quality: Like pretty much all G&G Airsoft guns, the G&G Piranha MK I GBB Airsoft Pistol build quality is really good. Fit and finish are excellent with virtually zero slide wiggle, the two tone stainless slide and chrome finish barrel look really good. It also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart.

Realism: The G&G Piranha MK I GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share looks, size and feel to that of the Glock but perhaps with an even more modernized look to it. You will find realistic function to the G&G Piranha MK I GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be field stripped.

Available in the: Replica Airguns Store

Pros:

  • Good balance of metal and plastic for a balanced and light feel.

  • Partial slide Blowback operation should allow for even better gas performance and snappy operation.

  • Ceramic Whirl Cylinder Valve should expect to get decent amount of shots per green gas fill.

  • White dot sights front and back.

  • Nice two tone slide.

  • Has a working trigger safety.

  • Smaller spit grip perfect for people smaller hands.

  • Comes with hard shell case.

  • New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.

  • 20mm Rail for accessories.

  • Comes in all black and two tone black and sliver.

  • Comes with high quality speed loader

  • Threaded barrel tip for add on mock suppressor.

Cons:

  • Sights are non adjustable.

  • Not an actual replica of any specific gun I know of but does share some Glock attributes.

  • No actual frame safety other than the trigger safeties, (not always a bad thing).

Comments:

Overall I really like the new G&G Piranha MK I GBB Airsoft Pistol, it has a really modern look to it yet has a familiar feel. The G&G Piranha MK I GBB Airsoft Pistol is fairly light weight with a quick and snappy slide allowing for very quick follow up shots. Combine all of that with the new Gas saving Ceramic Whirl Cylinder Valve I expect the G&G Piranha MK I GBB Airsoft Pistol to perform really well when in action. I like that you have the option of the more subdued all black version or if you like your guns to be a little bit more flashy you can also get it in the two tone with black and stainless version.

My Table Top Review Video of the G&G Piranha MK I GBB Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: G&G, Pirahna MK-1

G&G GPM92 GP2 GBB Airsoft Pistol Table Top Review

No Comments

Type: Gas Blowback Airsoft Pistol.
Manufacturer: G&G
Model: GPM92 GP2
Materials: Metal slide & frame, real wood grips.
Weight: 2.3 pounds (1040 grams).
Length: 8.9 inches total
Barrel: 4.6 inches, Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single and double action.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 28rounds.
FPS: 366+ fps.

Trigger Pull: The trigger pull on the G&G GPM92 GP2 GBB Airsoft Pistol is very good in both single and double action. Double action is a bit longer but not that much heavier when shooting in single action. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.

Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM92 GP2 GBB Airsoft Pistol but it should perform similar to my earlier review of the G&G GPM92 GBB Airsoft Pistol where it performed fairly well shooting in the mid 300 fps with a nice under 1 inch 10 round shot placement for 30 feet down range.

Build Quality: Like pretty much all G&G Airsoft guns, the G&G GPM92 GP2 GBB Airsoft Pistol build quality is right inline. Fit and finish where excellent and a lot of attention to detail was seen all over this Replica Airsoft Pistol. It also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart.

Realism: The G&G GPM92 GP2 GBB Airsoft Pistol is an excellent replica of the real steel Beretta Mod. 92FS, the safety even acts as a working de-cocker. You'll also find 5, 10, and 15 numbered markings on the backside of the magazine that would normally indicate how many bullets are in the magazine, a nice touch for sure! Everything works pretty much the same as it would on a real Beretta M9 including the ability to fully field strip the G&G GPM92 GP2 GBB Airsoft Pistol. I like the addition of th real wood grips that are a bit thicker than the plastic ones but if you ahed decent sized hands this shoudl not be a problem for you.

Available in the: Replica Airguns Store

Pros:

  • Lots of metal and good overall weight.

  • Pretty heavy Blowback operation.

  • Ceramic Whirl Cylinder Valve should expect to get decent amount of shots per green gas fill.

  • White dot sights front and back.

  • Nice real wood grips.

  • Comes with hard shell case.

  • New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.

  • 20mm Rail for accessories.

  • comes in three different color schemes. Black, Silver, Gold.

  • Comes with high quality speed loader

  • Safety also works as a de-cocker.

  • Threaded removable barrel tip for add on mock suppressor.

Cons:

  • Sights are non adjustable.

  • Wood grips make the grips a bit thicker than plastic grips.

  • Price does go up especially if yo want the silver or gold version.

Comments:

I would have to say the new G&G GPM92 GP2 is one of the nicest Beretta Model 92FS Airsoft Pistols you are going to find out there, even a step up over the previous GPM92 model. There is a ton of attention to detail for sure, You also get the hard shell case with included high quality speed loader and G&G's updated Ceramic Valve and Revolutionary Whirl Cylinder Valve that help with freeze-up issues. It’s also nice that you no longer are required to filed strip the G&G GPM92 GP2 GBB Airsoft Pistol in order to adjust hop-up and the real wood grips just really finish off this quality product from G&G.

My Table Top Review of the G&G GPM92 GP2 GBB Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: G&G, GPM92, GPM92 GP2

G&G Piranha TR - G&G Piranha MK-1 - G&G GPM92 GP2 - ICS XAE - ICS XFG Update Unboxing Video

No Comments

In this Preview Unboxing Video I take a look at five Gas Blowback Airsoft Pistols. Three of them are from G&G and two are from ICS. All offer full blowback operation and are green gas or propane powered with full size metal drop out magazines.

G&G Piranha TR GBB Airsoft Pistol

  • Caliber: 6 mm (.24 cal)

  • FPS: 350 to 400

  • Ammo Type: Airsoft

  • Magazine Capacity: 25 Rounds

  • Power Source: Green Gas

  • Blowback Action: Blowback

  • Primary Material: Metal & Polymer

  • Color: Black

G&G Piranha MK1 GBB Airsoft Pistol

  • Caliber: 6 mm (.24 cal)

  • FPS: 350 to 400

  • Ammo Type: Airsoft

  • Magazine Capacity: 25 Rounds

  • Power Source: Green Gas

  • Blowback Action: Blowback

  • Primary Material: Metal & Polymer

  • Color: Black/Silver

G&G GPM92 GP2 GBB Airsoft Pistol

  • Caliber: 6 mm (.24 cal)

  • FPS: 366+

  • Ammo Type: Airsoft

  • Magazine Capacity: 28 Rounds

  • Power Source: Green Gas

  • Blowback Action: Blowback

  • Primary Material: Metal & Wood (Walnut)

  • Color: Black/Brown

ICS XAE GBB Airsoft Pistol

  • Caliber: 6 mm (.24 cal)

  • FPS: 370

  • Ammo Type: Airsoft

  • Magazine Capacity: 24 Rounds

  • Power Source: Green Gas

  • Blowback Action: Blowback

  • Primary Material: Metal & Wood (Walnut)

  • Color: Black

ICS XFG GBB Airsoft Pistol

  • Caliber: 6 mm (.24 cal)

  • FPS: 370

  • Ammo Type: Airsoft

  • Magazine Capacity: 19 Rounds

  • Power Source: Green Gas

  • Blowback Action: Blowback

  • Primary Material: Metal & Wood (Walnut)

  • Color: Black/Tan

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: ICS, G&G, Piranha TR, Pirahna MK-1, GPM92, ICS XAE, ICS XFG

Crosman AK1 - G&G SMC9 - ICS CXP APE Update Preview Unboxing Video

No Comments

I am super excite to showcase three awesome rifles in this Update Preview Unboxing Video. Two of which are Airsoft and one is a Steel BB shooter, all of which are semi and full auto selectable. In this video I do a bit of an unboxing and preview of each Rifle not going into too much detail as I want to leave most of the information for my Table Top and Filed Test Videos. The main purpose of this video is to let everyone know we have these Rifles in our Canada Replica Airguns Store now for sale.

I may as well talk about them in the order they appear in my video so lets start with the ICS CXP APE AEG Airsoft Rifle. The ICS CXP APE AEG Airsoft Rifle is a mostly metal Electric Airsoft Rifle with realistic electronic blowback operation along with a CNC machined aluminum upper and lower receiver. It comes with a hi-cap 300 round magazine and a Ver 2 Full Metal ICS Split Type Gearbox. The ICS CXP APE AEG Airsoft Rifle weighs in at just under 3kg.

Next I showcase the G&G SMC9 GBB Airsoft Carbine, a unique product that converts the G&G GTP9 pistol into a a semi and full auto Carbine and includes a 50 round extended magazine, there is an even higher capacity drum magazine made for this product! You will find a fold out stock along with a CNC Machined MLOK Rail for additional mounting options.

Last but perhaps one that I have been the most eagerly anticipating is the Crosman AK1 CO2 Blowback BB Rifle a twin CO2 Blowback 4.5mm Semi and Full auto AK style BB Rifle, finally a decent AK BB Rifle! The Crosman AK1 CO2 Blowback BB Rifle has a claimed fps of 430 and shoots 1400 rounds per minute in full auto, very similar to the Crosman DPMS series of AR styled CO2 Blowback Full Auto BB Rifles. The Crosman AK1 CO2 Blowback BB Rifle comes with a 25 round magazine and swing out rear adjustable stock.

Categories: 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Full Auto, Gas, GBB, Pistol, Review, Rifle, Semi Auto, YouTube Video Tags: Crosman, AK1, Crosman AK1, G&G, SMC9, G&G SMC9, ICS, CXP APE, ICS CXP APE

Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol Field Test Review

1 Comment

Make sure to check out my Table Top Video and Written Review for the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol where I go over the features and specifications along with some nice close up video.

In this Field Test Shooting Video I shoot the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol in my indoor Sea Can Airgun Shooting Range to see what the real world velocity is and also how well it will group shooting 10 rounds at a paper target 30 feet down range. I was using .25 gram Airsoft BB’s for my testing along with Propane Gas. The temperature inside the sea can was around 26 degrees Celsius (79 degrees Fahrenheit).

Because the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol coms with both a shorter internal barrel and a screw on extended barrel designed to be hidden inside a mock suppressor I thought it would make sense to test both the short and long barrels to see what the fps difference would be. With the short internal barrel I shot 4 rounds and average 255 fps. I then added the longer barrel extension again shooting 4 rounds but this time I averaged 363 fps so a good 100+ fps faster with the longer barrel attachment added to the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol.

For my accuracy portion of the testing I left the extended barrel on the gun but was a bit disappointed in my 10 shot grouping. The Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol did not get the tightest of groupings coming in at around 5 inches. It also shot a little bit to the right but vertically was fairly well centered. Perhaps changing up the barrels and lengths might make a difference?

I did really like the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol, it has a really light trigger that is a bit hard to find the release point, the blowback action is crisp but not overly heavy. I’m pretty sure the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol is a VFC product so the quality is bang on. Other than the grouping being a little bit spread out I really liked everything about the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol.

Categories: 6mm, Airsoft, Blowback, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: Cybergun, FNX-45 Tactical