As many of you may know, I don't just own a bunch of airguns and blank guns. They are one of my biggest passions but I also have my Restricted Firearms License here in Canada and I own several "Real" hand guns and rifles that I enjoy very much.

I have four .22 caliber rimfire guns and I have another one on its way - the ISSC MK22 SCAR .22LR, you may ask why I need another .22 rimfire? Well similarly to airguns, .22 caliber rimfire guns are relatively cheap to buy and operate compared to their big brother larger caliber versions. So I guess that draws me to them, they are just so fun to shoot and in a guilt-free kind of way. With large caliber guns I tend to head to the range with a preset amount of ammo that I am willing to part with and when it's all gone then it's time to switch over to the .22 calibers and go nuts! And not only that, our .22 caliber rimfire rifles do not have the magazine round restriction like our 5 round restriction on large caliber rifles.

For example, the ISSC MK22 SCAR .22LR that is on it's way costs a fraction of the price of the full on military version at around $650 Canadian, that might sound like a lot but the NATO round firing version goes for about $3000 and as far as I know is not even available in Canada to the average joe like me? And you will be counting ammo with one of these NATO round firing bad boys, at least I know I would be :)

I will be doing a full review of the ISSC MK22 SCAR 22LR so make sure to check it out if this type of gun interests you also.

Here are some of the specifications for you till I get a chance to review this awesome .22 tactical rifle!

• Caliber: .22LR
• Overall Length Collapsed: 34.65 in./880 mm
• Overall Length Full: 36 in./916 mm
• Overall Width: 2.81 in./71,5mm
• Barrel Length: 16 in./420 mm
• Rifling Length: 15 in./406mm
• Number of Grooves 6
• Sight Length Max: 15.7 in./400mm
• Weight w/o Magazine: 6.5 lbs./2990 g
• Magazine weight, empty: 3.8 ozs. /110 g
• Trigger Pull, approx.: 4 lbs.
• Magazine Capacity:22 rds.
• This is a non-restricted firearm.

First off, you may have noticed this Henry Lever Action Rimfire .22 Caliber Rifle is not an airgun or a blank gun! So why am I reviewing it? This isn't going to be a review as much as it's going to be an overview.

I just really wanted to share this awesome little .22 caliber rimfire shooter with you because if you're like me then you may also appreciate the Henry Lever Action Rimfire .22 Caliber Rifle like I do. One reason I like airguns is because they are generally lower cost to purchase and lower cost to shoot then your average powder burner. My Henry .22 only set me back $269 and I have probably paid more for some of my airguns so this was not to bad on the pocket book. Another bonus is I can shoot this gun all day long because .22 caliber rimfire ammo is about 1/10th or less the cost of regular powder based ammo. I can buy a box of 500+ shells for under $20!

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

When purchasing a rimfire .22 caliber gun, you have to also consider what ammunition you are going to be using as not all rimfire .22 caliber guns will shoot all types of .22 caliber ammo. You can get .22 rimfire ammunition in "Long Rifle", "Long", "Short" and even "Buckshot". Keep in mind that not all .22 caliber guns will operate properly with all kinds of .22 caliber rimfire ammo. For instance, autoloaders generally require the "Long Rifle" ammunition to cycle properly. What I love about the Henry Lever Action Rimfire .22 is that it can shoot pretty much any .22 caliber rimfire ammunition you through at it except for the magnum loads which is a totally different gun altogether.

Another bonus to using the .22 caliber short ammo is that it is about as loud as a standard airgun, at least when using a rifle. So if you don't want to draw attention to yourself then pickup some shorts and plink away! Depending on what manufacturer of shorts you purchase they tend to shoot in the 700-1000 FPS using around a 20-30 grain bullet, so they are still perfectly good for small pest control. Just make sure to keep in mind what is beyond your target as a 20-30 grain bullet will penetrate objects and travel farther then a much lighter .22 caliber pellet even traveling at the same speed.

As this is just an overview I want ot cover some of the main points about the Henry Lever Action Rimfire .22 Caliber Rifle...

• Shoots .22 caliber rimfire ammunition in Long Rifle, Long and Short.

• Uses a Lever Action with a tube fed magazine.

• Magazine holds: 15-LR, 17-L, 21-S.

• Weighs 5.25 pounds.

• Has an 18 1/4 inch barrel and is 36 1/2 inches long.

• Has an adjustable rear sight and hooded front sight with a grooved receiver for easy scope mounting.

• It's mostly all metal and wood.

• Is totally fun to shoot and looks awesome!

So that's a wrap, if you want more info on this very cool .22 then check out the Henry Website.

Buy Air Rifles in Canada   -   Buy Red Ryder in the US

The following video is what happens when I grab my big guns and head out to the gun range with friends, lots of guns and some cameras! I still however love taking my air guns out in the back yard and enjoy shooting anytime I want for pennies a round.

You will see a variety of gun photos, HD video and slow motion high speed video capturing various hand guns and rifles on display and in use.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Some of the guns include:

• Norinco NP-30N 45 Auto (1911 Type Nickel plated)

• Norinco NP-34 9mm (Sig P228 Type)

• Browning Buck Mark Camper Stainless .22 cal.

• Walther P38 9mm

• Various Glocks (G17 9mm - G21 .45 cal. - G22 .40 cal.)

• Taurus Raging Bull Model 444 .44 Magnum

• Smith & Wesson Mod 627 8 Shot Performance Centre .357 Magnum

• Smith & Wesson M&P 15-22 .22 cal

• Ruger Mini-14 .223 cal.

Here is my Vimeo Video - Shooting Guns with Slow Motion High Speed Camera

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

"Before you attempt to do this modification you need to be aware that it may void your warrantee and/or you may fail and either break something or incorrectly reassemble your Mini UZI rendering it "Broked"! This is your problem so please do not attempt this modification (even though it is fairly easy to do) unless you're 100% confident you can do it and are aware of the possible consequences. Make sure to also take into account any gun laws in your area prohibiting full-auto capable firearms!"

(Special thanks to Herman for showing me the ropes on this modification)

This modification will make your semi-auto "only" Cybergun/KWC Mini UZI BB Gun into a full auto capable 4.5mm BB machine gun. From the factory the full auto switch position (Far Left "A") is disabled but the full auto selector position is visible. The actual full-auto functionality is still present in the Mini UZI but has been decommissioned by the simple means of blocking the selector switch from being moved to the far left full-auto or "A" position.

This full auto modification will show you how to disassemble the Cybergun - KWC Mini UZI BB Gun and remove the small plastic selector switch blockage so you will be able to manually switch between semi auto and full auto modes. This modification takes about 15 minutes to complete.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

You will need the following tools: A pair of pliers and either a pair of small wire cutters or a file.

Let's begin! Below are the two pre-modification positions available from the factory:

"S - SAFE"

"R - SEMI AUTO"

Below is a closeup of the top bolt cover that we will be removing to access the internal bolt for removal:

In the next photo we have removed the bolt cover by pressing the "angled button" towards the rear sight:

And now the bolt is removed:

I removed the grips but this is not necessary:

Now you will need to remove the lower receiver pin located at the back end of the receiver closest to the grip safety. Use a pair of pliers to pinch the metal pin while pushing it through. Once the pin is started you can use the pliers on the other side to pull the pin all the way out. You may need to us a fair amount of force to do this as the fit of the pin is tight:

Once the pin is removed the lower receiver can be detached:

You can see in the picture below the small plastic nub that we will need to remove in order to restore full-auto capability:

I used a pair of small wire cutters to clip this plastic nub off, but you could use a file too. Just make sure that the plastic is flush and does not have any burs or protrusions.

Below is a photo of the Plastic Nub removed from another angle:

After that, all you need to do is reassemble you Mini UZI in revers order to finnish the Full Auto modification.

In the below Photos you can see we have restored the ability to move the fire selector switch over to the "Far Left" or "A" position, reenabling the Cybergun - KWC Mini UZI BB Gun to shoot in full auto when desired.

"A - FULL AUTO"

Now enjoy your Cybergun - KWC Mini UZI BB Gun in full-auto as it was originally designed!

Here is my Vimeo Video in Narrative with Photos:

Buy this gun in Canada

Buy this gun in the US

This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US