This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• UMAREX MAGNUM RESEARCH DESERT EAGLE BLOWBACK PELLET PISTOL CHRONOGRAPH TEST

Type: Pellet air pistol.

Manufacturer: Umarex.

Model:Magnum Research Desert Eagle.

Materials: Exterior mostly polymer with internal metal parts.

Weight: 2.4 pounds.

Barrel: 5.7 inches, metal-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, blowback, double and single action.

Ammunition Type: .177 cal. Pellets.

Ammunition Capacity: 8 rounds - rotary magazine.

FPS: 425.

Trigger Pull: The trigger uses two stages. The first stage rotates the magazine while the last stage releases the hammer. When in double action mode the trigger also engages the hammer. Overall the trigger pull I would consider to be a medium pull yet smooth making it easy to shoot on target.

Accuracy: Very good, the Umarex Desert Eagle makes a great semi-auto target shooter as far as 30 to 40 feet out.

Build Quality: Even though the external shell of the Desert Eagle is mostly plastic, it is still a very well made gun. Most of the internal parts that matter seem to be made out of metal. The fit and finish is also very good.

Realism: This is a very close replica to the real actual Magnum Research Desert Eagle with licensed trademarks and most everything in all the right places. However, other than the safety lever, many of the mechanical aspects of the gun are either non-functioning or serve an alternative purpose. The slide release actually opens the loading bay by making the barrel slide forward. The disassembly lever is non-functioning and is molded into the plastic along with the magazine release button.

Purchased this form: The Replica Airguns Store.

Pros:

• Good reproduction of the original Magnum Research Desert Eagle.

• Would make an excellent training gun as it has a similar size, weight, and feel to the actual Desert Eagle handgun. (With obviously much less kick :)

• Blowback action and loud report add to the realism of shooting this pellet pistol.

• Nice high FPS for a blowback pellet gun.

• Good accuracy.

• Adjustable rear sight.

• Picatinny rail on top and bottom for accessories like a scope, red dot, laser sight and/or tactical light.

Cons:

• Heavy usage of CO2.

• Slide does not stay back after 8th shot so you need to count them off or you end up wasting CO2 before you realize no pellets are coming out.

• No way to keep the slide back, no working slide release.

• Lots of usage of plastic, would have been nice to have seen more metal in it.

• Large gun, not suitable for people with small hands.

Comments:

The Umarex Desert Eagle is a very unique pellet blowback air pistol, there are very few airgun pistols that include blowback, shoot pellets and have decent accuracy and FPS . The Umarex Desert Eagle is a very close replica of the original Magnum Research Desert Eagle. It has very good accuracy but you can only expect about 32 good shots (4 magazines) out of a CO2 cartridge. If you're looking for an airgun that may be a bit of a handful and can get over the abundance of plastic and hunger for CO2, than you will be rewarded with a predictable, accurate and enjoyable true semi-auto target pistol.

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• UMAREX PX4 STORM PELLET GUN REVIEW

• BERETTA CX4 RIFLE & PX4 STORM TACTICAL PISTOL ADDED TO COLLECTION

I've already done a review of the Non-Tactical Umarex PX4 Storm CO2 Blowback Pellet-BB Airgun so make sure to read up on it and also checkout my YouTube Video Review.

This post/video is mainly just to show you what the differences are between the Tactical Recon Version and Non-Tactical versions of the PX4 Storm and talk a little about the added accessories included in the Tactical version.

The base gun is literally exactly the same except for the two-tone coloration on the Tactical version. The Tactical version obviously comes with the addition of several accessories which makes it the "Tactical Model".

Firstly, there is the addition of the Suppressor. With an airgun, usually a suppressor is mainly for show as sound level is not often an issue! That said, an airgun can benefit from a suppressor in one big way - a longer barrel meaning more FPS. Unfortunately Umarex did not take advantage of adding barrel length to the PX4 Tactical model and I'm not really sure why? Even with a longer barrel I double that the PX4 Storm would exceed 500 FPS excluding it from the Canadian market. That's just my two cents on the suppressor but on a good note it seems to be all metal and well built.

There is also the addition of a "Tactical Bridge Mount" that allows you to add more accessories than just the under barrel ones available to the Non-Tactical version. The Tactical Bridge Mount actually gives you four location to mount more accessories - (bottom, top and both sides). The Tactical Bridge Mount is not the most ridged of mounts but it does the job and because it is more flexiable it may be less prone to breakage in a fall.

Umarex takes advantage of these rail locations by including a Red-Dot scope on the top and a Tactical Light on the left side. The Red-Dot scope is decent but there is room for improvement as it's fairly entry level. The Walther Tactical Light on the other hand is very nice and comes with a pressure sensitive thumb grip switch.

All in all you will pay about double for the PX4 Storm Recon over the basic PX4 Storm but it does make for an intimidating looking hand gun especially if you're into that tactical look!

Buy Pellet Guns in Canada

Buy Pellet  Guns in the US

I had an idea the other day, Since I have all these Replica Guns and just about any TV show, Movie or even Internet Video that uses guns is going to need guns that look real, why not put my Replica Guns along with myself up for hire!

The first thing one must do with an idea like this is a bit of research to make sure there aren't any major road blocks like the law, and getting thrown in jail, so I called my local RCMP Chief Firearms Officer and we had a talk. Long story short, if I can buy the guns I'm going to be using without a firearms license, then I don't need a Business Firearms License to use my guns on set.

What most large budget TV and Film productions do is a hire a "Gun Wrangler" who is authorized to transport and supervise real steel guns on set - Very Expensive!!!

So with my much lower overhead and next to no red tape I can now offer a large and growing assortment of Replica guns for use on set in TV and Film. Right now I am only offering this in Canada, in the Vancouver and lower mainland areas.

So if you need guns for your TV, Film or Movie - You know who to call - Click on the link for more info on TV, Movie & Film Prop Guns For Hire!

Related Posts:

• UMAREX PX4 STORM PELLET GUN REVIEW
• UMAREX BERETTA PX4 STORM RECON CO2 BLOWBACK PELLET-BB GUN REVIEW
• UMAREX CX4 STORM GETS SOME NEW TOYS - 3X9X40 SCOPE AND FOREGRIP

I acquired a couple new CO2 blowback pellet guns to add to my Airgun Collection! I say new but they are actually used (Barley!). I got them off of a friend who wasn't really using them any more and he figured if he wanted to shoot them, he could always just drop by. Buying second hand is a good way to purchase items if you can find what you're looking for and if it's in good condition.

The Beretta CX4 Storm is a German made true-blowback semi-auto CO2 air rifle that uses 88 gram CO2 tanks and has a 30 round removable magazine. The claimed FPS is rated at 495 although I suspect it shoots under this. It is nearly identical to it's 9mm and 40 Cal brother. It even comes in the same case.

The Beretta PX4 Storm Tactical Pistol is basically the same gun as my Non-tactical Beretta PX4 Blowback Airgun but in two-tone and with a few added accessories such as a Silencer, Rail System, Red Dot Sight, and Tactical Flashlight. It uses regular 12 gram CO2 cartridges, has a 16 round magazine with a claimed FPS of 380.

As with all of my air guns, I plan to eventually review these two nice additions to my Replica Airgun Collection!

Buy Air Rifles in Canada   -   Buy this Air Rifle in the US

Buy this gun in Canada   -   Buy this gun in the US

(Photo curtesy of www.co2airguns.net)

Related Posts:

• BERETTA CX4 RIFLE & PX4 STORM TACTICAL PISTOL ADDED TO COLLECTION

• UMAREX BERETTA PX4 STORM RECON CO2 BLOWBACK PELLET-BB GUN REVIEW

Type: Pellet air pistol.

Manufacturer: Umarex.

Model:PX4 Storm.

Materials: Metal slide, composite frame.

Weight: 1.6 pounds.

Barrel: 4.5 inches, metal-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, blowback, double and single action.

Ammunition Type: .177 cal. Pellets or Steel BBs 4.5mm.

Ammunition Capacity: 16 rounds.

FPS: 380.

Trigger Pull: The trigger pull is long and light when in single action mode, there is a slight heavy spot at the begging when the rotary magazine is turned to advance to the next pellet and then another break point near the end to actuate the hammer.

Accuracy: Good, not amazing but pretty good.

Build Quality: Excellent, with a very nice slide finish that is more of a dyed metal rather than painted like most airguns. The non-metal components seem to be very durable and the fit and finish to this gun is outstanding.

Realism: This is a very close replica to the real Beretta PX4 Storm with licensed trademarks and most everything in all the right places. The only real acceptation is the safety lever which has been repurposed from the Umarex CP99 Compact BB Blowback Airgun.

Purchased this gun in: The Replica Airguns Store.

Pros:

• Good reproduction of the original Beretta PX4 Storm.

• Would make an excellent training gun as it has a similar size, weight, and feel to the actual Beretta PX4 Storm handgun.

• Blowback action is very firm adding to the realism of shooting this weapon.

• Good FPS and CO2 efficiency for a blowback Pellet air gun.

• Nice easy to use sights with white spot markings for quick targeting.

• Picatinny rail for accessories like a laser sight and/or tactical light.

Cons:

• Non functioning slide release on frame and safety lever on slide.

• Slide does not stay back after 8th shot so you need to count them off or you end up wasting a few shots before you realize no pellets are coming out.

• No way to keep the slide back, no working slide release.

• Safety lever seems out of place and takes away from the realism of this replica.

Comments:

The Umarex Beretta PX4 Storm is a very unique pellet blowback air pistol and there are very few airguns that sport all the same features. Not only is it a very close replica of the original Beretta PX4 Storm but it's also a blowback pellet shooter with decent FPS velocity. The Umarex PX4 Storm has decent accuracy and you can expect about 60 good shots out of a CO2 cartridge. At well under $100, this replica airgun is a great value and a nice addition to any airgun enthusiasts collection.

Buy this gun in Canada

Buy this gun in the US