This topic of Blowback Airguns Versus Non-blowback Airguns comes up often so I thought I would address it a second time around since I get a lot of new visitors and subscribers daily who may not have watched my first video explanation on this topic. You can also checkout my first video on this subject since there may be some stuff I missed out in this video second video ;)

There are really two types of people asking or commenting on Blowback Airguns Versus Non-blowback Airguns. The first type of person who genuinely wants to know which is best and for what reasons. Then there is the other kind of person who makes a narrow minded statement that one type is clearly better than the other type, based on their own preferences and interests but not considering that there are other people out there with different opinions and preferences than them. You know who you are and we all know you are not going to change cause that would require an open mind...

Here is a list of the Pros and Cons I go over for each style of Airgun:

Pros:

• Blowback guns simulate recoil.

• Blowback guns can have better and more true triggers compared to their real steel counterparts.

• Blowback guns can be better suited for action shooting.

• Blowback guns are better as prop guns.

• Blowback guns are generally more realistic in terms of mechanics.

• Non-blowback guns generally use less CO2 per shot.

• Non-blowback guns generally have higher fps.

• Non-blowback guns can be more accurate.

• Non-blowback guns can be more reliable.

• Non-blowback guns can be less expensive.

Cons:

• Blowback guns generally get less shots per CO2.

• Blowback guns generally have lower fps.

• Blowback guns can be less accurate.

• Blowback guns can be less reliable.

• Blowback guns can be more costly. 

• Non-blowback guns do not simulate recoil.

• Non-blowback guns do not have true single action only triggers.

• Non-blowback guns generally have heavier triggers that slow down shooting performance.

• Non-blowback guns are generally not as good for prop use and or training.

• Non-blowback guns generally are not as realistic compared to their real steel counterparts. 

Watch my Vimeo video where I go into detail on Blowback Airguns Versus Non-blowback Airguns again ;)

A very common occurrence with CO2 Airguns and Airsoft guns are leaky CO2 seals. Usually this occurs right where the CO2 cartridge connects to the main valve area. This can be either in the gun or in the magazine depending on the setup of the airgun.

There are many reasons why this can happen, but the most common reasons are a worn-out or dried up seals or even a seal that has been imprinted or misshapen from the constant pressure of the tip of the CO2 pressing against it.

When this happens you may encounter a leaking CO2, the severity of the leak can vary from mild slow leaks to leaks that can be so bad that the gun is unusable. Keep in mind there can be other problems not related to the CO2 seal such as in the valve area, the fix I show you in this YouTube video will not fix a leaking valve, you can try using something like Crosman Pellgun oil for a problem like that.

Watch my below Vimeo video where I show you how you can easily use some Plumbers Teflon Tape to improve the contact points between your CO2 and CO2 main seal and eliminate leaking CO2 in your Airgun.

A very common question I get asked is "How Long Can I Leave CO2 in My Airgun?" So what do I do when I get asked a question over and over again... Well I make a video and give you my answer to the question.

Some CO2 Related Questions I seem to get over and over again are:

1. Can I leave an unused CO2 in my Airgun and for how long is it safe?

2. Can I reuse a C2 once it is empty?

3. Can I use my gun without CO2?

In this YouTube video I address questions 1 and 2, I kind of forgot about question number 3 since it is not as often but it does come up from time to time believe it or not and the answer to being able to use a CO2 airgunwith out CO2 is "NO", It's kind of like trying to drive a car without gas, or turn on a light without electricity or stay alive without food...

So anyways, watch my below Vimeo video for answers to questions one and two:

I've already done a full Table Top Review that included a Pre-test for this war pistol replica where you will find more details and specifications for the KWC Mauser Airsoft pistol.

In this official Field Test Shooting Video, I do my standard Chronograph test where I shoot a series of .25 gram 6mm Plastic Airsoft BB's using a brand new CO2 cartridge to see what kind of real word Feet Per Second performance I can get out of the KWC Mauser CO2 Blowback Airsoft Pistol. On this medium temperature day I averaged a very quick 415 fps which may be a bit hot for most Airsoft matches. The temperature was fairly cool at 14 Celsius or 57 Fahrenheit so the fps will only get faster on a warmer day.

During my Accuracy Shooting Test, I set myself up 30 feet away using a semi-rested stance (Sand bag up front, standing in the back). I did have to adjust my rear sight to the lowest position and even then I found that I needed to aim at the lowest ring on the target to get my shots close to the center and even then they placed a bit high. Even though the KWC Mauser Airsoft Pistol shot high the results where very good, resulting in a 10 shot grouping in the 1.5 to 2 inch range!

Overall I really enjoyed shooting the KWC Mauser CO2 Blowback Airsoft Pistol, the trigger is super nice and short with a light single action release. The blowback action is very quick and snappy which really makes the full auto rate of fire very high. You will go through a 21 round magazine in a hurry! It is a sample or prototype pistol and I would imagine that KWC could work on getting the FPS juts a bit lower so it would be more usable in an Airsoft Game, and while they're at it they should bring the shot placement down just a bit. Other than that it's a really great Airsoft War pistol replica worthy of addition to anyone collection.

Buy KWC Mauser Products in the Canada Store

Type: Airsoft Pistol.

Manufacturer:KWC.

Model:Mauser (M1932 / M712 Schnellfeuer).

Materials: Almost entirely all Metal.

Weight: 3.15 pounds (1424 grams).

Barrel: 5 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi & full auto, single action only with full blowback.

Ammunition Type: 6mm Plastic Airsoft BB's.

Ammunition Capacity: 21 round full size drop out metal magazine.

FPS: 400+.

Trigger Pull: The Single Action Only trigger pull on the KWC Mauser CO2 Blowback Airsoft Pistol is what you would expect from a full blowback, true single action only pistol, it has a little bit of take-up and then a smooth fairly light release. Of course when in full auto mode, just press and hold the trigger till the ammo is gone, but don't hold the trigger too long since when the BB's run out, the gun will keep firing as there is no bolt lock back on empty.

Accuracy: It took me a while to figure out exactly where this pistol was actually shooting, but once I realized the KWC Mauser was shooting way high and I adjusted the rear sight all the way to the bottom, I started getting shots at least on to the paper, I did have to hold really low to get near the bulls eye but keep in mind this is a sample pre-production model so some modifications may be in order to correct the rather high shot placement. Over all the accuracy at 30 feet out was very good with about a 2 inch group from 10 shots. Full auto was as you would expect, more of a spray and pray. I do have to say I was surprised by the feet per second performance, even with .25 gram Airsoft BB's I still shot well over 400 fps on a new CO2 cartridge.

Build Quality: The KWC Mauser CO2 Blowback Airsoft Pistol is well built being that it is pretty much entirely metal. It weighs in at a whopping 3.15 pounds so be prepared for a heavier gun but you can choose to hold it two handed by using the forward magazine as a sort of fore-grip. Again this was a pre-production sample but even so the fit and finish looked and felt good. I really liked the dark grey finish and very believable plastic wood grain grips.

Realism: The KWC Mauser Airsoft Pistol is spot on replica of the M1932 / M712 Schnellfeuer with as far as I can tell all the same working parts including the semi and full auto selector switch. The KWC Mauser also has a full working bolt, hammer, safety, adjustable rear sight and of course full size drop out metal magazine that holds the CO2 and Airsoft BB's.

Purchase from:The Replica Airguns Store

Pros:

• Nice quick snappy blowback.

• Lots of metal and good overall weight - very heavy

• Very high fps and good accuracy.

• Very good replica of a real Mauser (M1932 / M712 Schnellfeuer) with all working parts.

• Nice short single action light trigger.

• Shoots in both semi and full auto selectable.

• Will come in 4.5mm Steel BB and 6mm Plastic Airsoft.

Cons:

• Bolt does not lock back on last shot.

• Seemed to shoot really high even when adjusted as low as possible.

• Not totally sure when we will have it in stock?

Comments:

Overall the KWC Mauser CO2 Blowback Airsoft Pistol is that all metal version we kind of hoped Umarex had made, and from what I can tell in the KWC product brochure, this one should be available in both 4.5mm Steel BB and 6mm Plastic Airsoft so this should make everyone pretty happy :) Other than the rather high shot placement I really liked the KWC Mauser especially the super high fps and ultra fast rate of fire in full auto mode. Another must have classic war pistol to add to the collection!

My Vimeo Video Review for the KWC Mauser CO2 Blowback Airsoft Pistol:

Buy KWC Mauser Products in the Canada Store

I have some really new guns from KWC for you today, so new that we don't even stock them yet (hopefully soon) and one of then is an un-marked and un-branded sample version that didn't even come in a proper box. Pretty sure this will be the first YouTube video review of it!

It's great that we are starting to see more of the classic older guns, it really give you a chance to appreciate some of the original designs that helped the development of the more modern guns we now have today.

In this preview-review video we take a quick look at the KWC P-08 Luger and KWC Mauser C96 CO2 powered Blowback Airsoft pistols. I will be doing a full table top and field test shooting video for each gun so make sure to check back for them later. I even do a quick comparison to the same style 4.5mm BB pistol offerings from Umarex I already reviewed, the Umarex P-08 and Umarex C96.

Both the KWC P-08 Luger and C96 Mauser are pretty much all metal with full drop out magazines that hold the CO2 and the 6mm plastic Airsoft BB's, the KWC luger holds 15 rounds while the KWC Mauser holds 19 rounds. Since both Airsoft pistols are full metal they come in nice and heavy with the C96 Mauser weighing just a hair over 3 pounds and the P-08 just a bit under 2 pounds. Both pistols have full blowback operation with very nice single action only triggers and while the P-08 shoots in semi-auto only the C96 can select fire in semi and full-auto modes.

According to the KWC product brochure, both of these new classic CO2 blowback pistols will be offered in 4.5mm Steel BB and 6mm Plastics Airsoft versions. As of right now we do not have any in stock as we are planning an order based on these two samples. We like what we see and will be bringing them in to our Canada and possible US online store so stay posted as once we have verification of an order on rout, we will be offering a pre-sale option so you can reserve yours.

Watch my preview-review of the KWC P-08 Luger and Mauser C96 CO2 Blowback Airsoft Pistols:

Buy KWC Products in the Canada Store

Buy Umarex Products in the Canada Store

This may be a bit controversial for some people who don't like the thought of using an gun for hunting or extermination of unwanted pests. But weather or not it is accepted by all, it is a practice that many people still embrace including myself when done in a humane way.

Let's start off by addressing this topic by asking some questions and filling in some of the answers. Keep in mind I go into much more detail in my Vimeo video below.

What is the reason that you need to Shoot or Hunt an Animal?

Are you shooting an animal out of need or just for fun, sure there is a thrill in the sport of hunting but after taking down your prey, the animal should not be killed in vain as the meat should be eaten. There are also times when pesky critters get into your gardens, tree farms, feeding stations garbages and who knows what else? I personally think shooting an animal that has not done you any harm or that you don't plan on eating is not ethical. So question your motives wisely?

Can you use an Airgun for Hunting and or Pest Control?

The short answer is yes! As long as you choose the correct Airgun for the job, one that has enough power and accuracy to get the job done in a humane manner. Using an underpowered or inaccurate gun of any type for the chosen target will lead to the animal being wounded and possibly getting away to suffer unnecessarily.

What about Pistols versus Rifles?

Given the choice, a rifle will always be your best bet, rifles tend to be more accurate since they are more stable to hold and the fact that the sights are further apart which improves the guns accuracy. Most rifles also allow for enhanced sighting systems like red dots or magnified scopes for even further accuracy improvements. There are some pistols made specifically for hunting and target shooting that can be accurate but I would limit their use to shorter ranges.

What about Pellet guns versus BB guns?

BB guns in general are not meant for hunting or pest control, and in most cases they are underpowered and not as accurate as their pellet shooting counterparts, especially out at longer ranges where most pests keep their distances to. If you plan on doing some hunting and or pest control, please invest in an adequate pellet rifle to get the job done humanly.

What type of Ammo is best for Hunting and Pest Control?

There are lots of types of pellets available, pointed, rounded, flat, hollow-point and even pellets that have nylon tips. At the end of the day, use the pellet that is the most accurate in your Airgun because shot placement will win over pellet shape any day of the week. The reality is that as long as that pellet hits the target with adequate velocity, it doesn't matter what shape it is, it's more than likely going to pass right through the animal.

What is the lowest FPS that I can use?

I would rather ask the question, what is the highest fps I can get away with since more fps will give you more margin for error, since it will have a flatter trajectory and will do more damage even if your shot is off a bit. An experienced shooter could make a kill shot on a small pest even with a 400 fps airgun but the shot would have to be perfect and the range would have to be close. Of course when shooting larger game, you will need larger caliber pellets with higher velocities. Also when using a high velocity airgun you need to consider what is beyond your target, if you miss, where is that pellet or bullet going to end up? You need to make sure you do not injure anyone by mistake as pellets/bullets can travel a long distance.

How large of an Animal can an Airguns Kill?

This is really dependent on the Airgun being used, Airguns come in many different calibers, from .177 right up to .50 caliber, some PCP Airguns can even take down a deer! You need to do your research and make sure the Airgun you choose has both the power and accuracy you need for the intend prey.

Where can I use an Airgun for Hunting and or Pest Control?

This is a question you need to ask your local authorities as laws and hunting regulations are different just about everywhere. Even shooting pests on your property may require a permit so be careful to obey your local laws.

In many of my reviews I show the loading process of each gun but sometimes I either skim over this part or assume most people already know how to load an Air Pistol and skip it entirely. Well as it turns out not everybody does know how to load up an Airgun or they are unclear on certain areas, like do you actually need the CO2 and how long can you leave CO2 in an airgun?

So I made a video specifically to cover how to load CO2, BB's and/or Pellets into your Air Pistol.

Now even though this video is targeted at 4.5mm Steel BB and Lead Pellet Pistols, there is a crossover with 6mm Airsoft Pistols so this video may also help an Airsoft shooter.

Our Family Bearded Dragon (Dijon) was looking rather sad and lonely today so I figured he could hang out while I made the video, he really doesn't do much of anything most of the time so why not give him a special appearance in one of the Replica Airguns Videos ;)

Two questions that come up over and over again and to be honest I just hate answering, mainly because both of these questions to me are kind of common sense questions. I feel if someone where to stop and actually think about teh question, the answers would become obvious.

That said, common sense has to be learned somewhere and not all of us are exposed to the same life experiences so here goes...

The two questions are:

• Will this Ammunition Work in my Gun?

• Can I Convert a Blank Gun to a Real Gun?

The answer for both of these question is actually the same! Use the ammo made for your gun and do not try to use anything other than the ammo that was made for your gun. Do not try to modify your gun to shoot anything other than the ammo that was made for it, if you do, you may be breaking the law and could land yourself in jail. If you can follow these rules then your ammo and gun will work as intended :)

So that's pretty much it in a nutshell, watch my YouTube video below as I show you examples of ammo types with visuals on exactly why you need to use the ammo made for your gun. I also talk about the dangers of attempting to modify a blank gun to shoot some sort of real bullet and why it is a very bad idea in so many ways to try and convert a blank gun into a real gun.

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the US Store

This video should go "Hand in Hand" (pun intended) with my Best Two Handed Pistol Grip Tutorial Video that I did last year back in August. After that video I had several people ask me to talk about how to aim a gun. I guess if you have been shooting guns for a while you kind of take it all for granted but after teaching my kids the proper way to aim a gun at a target, this info is not naturally born into us ;)

This video demonstrate how and where to place your open gun sights on a target and also how you can compensate for a gun that may not be perfectly sighted in.

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Carbine GBB.

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

I could pretty much copy and paste my review of my G&G CM16 Raider GBB since both of these guns are pretty much the same Airsoft Rifle with different finishings. Instead I will place a link to my G&G CM16 RaiderVersion 2 GBB AR Airsoft Rifle Review and insert some nice photos of the  G&G CM16 Carbine version for you to admire :)

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada - Buy G&G Airsoft Rifles in the US

This is take 2 of my Modification to my F1 Chrony Chronograph. The purpose of this modification is to improve the low light FPS readings. In my first attempt I used LED Puck Lights but they where the kind that used flat panel LED's and they only had 4 panels per LED Puck which made each LED panel kind of bright. I did get OK with my first mod using LED Puck Lights but not as good as I would like to see.

So here we are with take 2 of F1 Chrony Chronograph LED Puck Light modification and this time around I am using standard bulb styled LED lights and to improve my chances of this working I went with and LED Puck that contained 24 LED bulb lights per puck, this way each light on it's own is a bit dimmer which I feel will give a more diffused lighting effect and hopeful consistent fps readings.

By the way I got these LED Puck Lights at my local dollar store for $2.50 each so not a very expensive modification, especially if they work.

Well... Watch the video and see how they perform...

This video was made to show you the results I got by mounting LED puck lights to the top of my F1 Chrony Chronograph defuser panel in order to improve the low light Feet Per Second readings when using 4.5mm Steel BB's.

I have been struggling with my F1 Chrony Chronograph during the fall and winter months as tit becomes overcast and dark where I live. There have been days where I have gone out to shoot my field test shooting video and not been able to get any Chronograph fps results which is very frustrating because much time and effort goes into the planning setup of each video.

I was given advice from several of my viewers to mount an LED puck style light on the back side of my Chronograph defuser panel and that this helps the Chronograph to read much better in low light situations.

I bought a multipack of the LED puck lights from my local Costco but they did not work as well as I expected them to as they had a panel style of LED rather than the bulb shaped LED which I think may diffuse the light a bit more. My next experiments will be done using LED Puck lights but with the bulb styled LED.

You can watch my video to see how my first attempt using an LED Puck light with my F1 Chrony Chronograph worked out.

I stopped by the ICS Booth, we don't sell too much of their products but have carried a few items from time to time. ICS caries some nice quality Airsoft guns including the M1 Grand with real wood stock, and some AK & AR variants.

One of our suppliers had the new FN Herstal Five-seveN Blowback Airsoft pistol, I believe made by Marushin. Like the real FN Herstal Five-seveN, the pistol is pretty much all polymer including the slide and frame. This pistol also uses CO2 in the full size drop out magazine which should make it fairly powerful.

Looks like there is another Dan Wesson contender available now in the form of a Swiss Arms S&W 357 Magnum 4 inch and 6 inch barreled version, they look really nice and like the Dan Wesson have the realistic reusable brass shells that hold the 4.5mm Steel BB's.

Ever considered owning a  mobile Gunsmith vehicle, look no further, I came across this pimped out Firearms Van complete with machine guns mounted in the front :) Inside was a complete firearms workshop.

Last but not least, we had some fun while in Vegas. I go down for the SHOT Show for business but I also bring my wife and we make time for some non business related activities. I generally stay at the WorldMark resort each time and this year the weather was pretty nice so we where able to get some sun by the pool a couple of days and I even got a tan line! Of course the food and entertainment is always awesome in Vegas.

We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.

I also visited my friends at the ASG booth but for some reason I did not get a photo  of their booth? I do have some video walk through stuff I will show you in my YouTube Video coverage of this years Vegas SHOT Show. Most importantly I have lots of gun photos so let's take a look at them...

One of my favorite ASG pistols is the Bersa BP9CC, I have already reviewed it and I just really like how this gun looks and holds, ASG took it one step further this year by adding a two-tone silver version and I have to say it looks awesome in person, my photos do not do it justice at all :(

A new handgun to the ASG blowback pistol series is the CZ P-09 Duty Pellet pistol. Basically it shares similar mechanics to the Umarex PX4 and Gamo PT-85 using the double sided rotary pellet magazine with 8 shots located on each end of the stick magazine. The ASG CZ P-09 Duty features a metal slide, working hammer and safety.

Another pellets pistol that should be very familiar to most of you is the new .177 caliber pellet shooting Dan Wesson in 6 inch silver and 8 inch black versions. ASG added a rifled barrel and redesigned solid brass shells that hold pellets instead of 4.5mm Steel BB's. Expect to take a little bit longer to reload the pellets as unscrewing the tip of each shell is required to place a .177 caliber pellet in each bullet tip.

Of course ASG has tons of licensed pistols to choose from, many on both 4.5mm Steel BB and 6mm Plastic Airsoft!

One new rifle that stood out to me was the ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle, the Scorpion features an intelligent AEG system that detects when there may be a potential feeding problem and also when the magazine is out of ammo.

I get many question over on my Vimeo Channel, lots of times people asking me which gun is better and in most cases it really comes down to personal preference. But in some situations the comparisons are really close and to be honest it's even hard for me to decide which gun I think is better.

I get asked which one has higher fps, or is more accurate, or has harder blowback recoil... the list goes on. Without actually taking both gun outside and doing a head to head test using the same exact situations, I really can not honestly tell you! So that's exactly what I am going to do. Take some of the most commonly asked about gun comparisons and have a showdown.

Over the next while I will be making a total of five separate videos where I compare the following CO2 BB pistols head to head:

• The Tanfoglio Gold Custom versus the Sig Sauer P226 X-Five Sight Rail Version

• The KWC Model M1911 Tac A1 versus the Cybergun/KWC GSG 92/M92

• The ASG Dan Wesson 8 inch Revolver versus the Umarex Smith & Wesson 327 TRR8

• The ASG CZ 75 P-07 Duty versus the ASG Bersa BP9CC versus the ASG STI Duty One 1911

• The Gamo PT-85 versus the Umarex Beretta PX4 Storm

Make sure to come back and check out these upcoming head to head field test shooting videos!

So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.

Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!

2013 BB Pistols

2013 Pellet Pistols

2013 Airsoft Pistols

2013 Blank Pistols

2013 Rifles

Type: GBB Airsoft Machine Pistol (Used).

Manufacturer: KSC

Model: Cobra M11A1

Materials: Plastic and metal.

Weight: 2.9 pounds (1315 grams).

Barrel: Metal non-rifled.

Propulsion: GBB.

Action: Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 40 rounds.

FPS: 300+ fps.

Trigger Pull: The trigger pull on the KSC M11A1 GBB Airsoft Machine Pistol is pretty much exactly what you would expect from this fast firing single action only semi and full auto machine pistol, it has a really short take-up and then a nice crisp light trigger pull. Since it is an open bolt system, you will need to pull back the bolt for the first shot, releasing the trigger releases the bolt, just like with a real M11A1.

Accuracy: At this point because I received this gun from another collector in used condition, it is not working 100%, the hop-up bucking was damaged and the new ones I ordered are not the correct versions for this Airsoft gun. It does shoot but it is temperamental, sometimes the bolt will not cycle all the way and I have no idea how this is effecting the fps and accuracy. It would not be fair to test it in this condition, hopefully I can find the right hop-up bucking for it and do the Field Test Shooting Review at some point.

Build Quality: MyKSC M11A1 GBB Airsoft Machine Pistol has been used a fair bit so it is somewhat battle scarred, still it looks pretty good and other than the Hop-up bucking problem I am having it should be in working condition, unfortunately without the correct hop-up bucking, this gun will not work properly. Hopefully I can find a hop-up bucking? Even though much of this machine pistol is plastic externally, it has held up very well, the metal parts do also help to balance it off and give it a decent overall 3 pound weight which feels good considering it is such a small gun. 

Realism: The KSC M11A1 GBB Airsoft Machine Pistol is a very close copy of the real steel Cobra M11A1 Machine Pistol, all the parts appear to function just like the original Cobra RPB Industries M11A1 and it even field strips in the same manor. The full licensing and trademarks also help to make this replica very believable.

Reviewed by:ReplicaAirguns.com

Pros:

• Very realistic and accurate replica with full Cobra RPB Industries licensing.

• Even though there is lots of external polymer, it still has good weight to it.

• Full metal 40 round drop out magazine, holds BB's and Gas.

• Everything works like the original, field strips and lots of mechanical parts. 

• Shoots in both semi and full auto.

Cons:

• Hard to get here in Canada and hard to get parts here in Canada.

• Mostly plastic main build - Limited usage of metal and steel.

• Have no idea how it will perform because it is not functioning at 100%.

Comments:

Well I've pretty much said everything I can say without actually shooting it? Even though my used KSC M11A1 GBB Airsoft Machine Pistol is not in 100% working condition, I still like having it as I like the replica aspects of owning it, how else would I get my hands on a .380 caliber full auto machine pistol here in Canada ;) And you never know, I may just luck out and find the proper hop-up bucking for it and then have the chance to do my Field Test Shooting Review for you all :)

My Vimeo Table Top  Review of the KSC M11A1 GBB Airsoft Machine Pistol:

Buy BB Mini UZI in Canada

Buy BB Mini UZI in the US

Type: Pellet Pistol (Used).

Manufacturer: Daisy

Model:Power Line 2003

Materials: Mostly plastic.

Weight: 1.6 pounds (726 grams).

Barrel: Metal rifled.

Propulsion: 12 gram CO2.

Action: Single action only.

Ammunition Type: .177 caliber lead pellets.

Ammunition Capacity: 35 rounds.

FPS: 400+ fps.

Trigger Pull: The trigger pull on the Daisy Power Line 2003 Blowback Pellet Pistol even though it is single action only, is a bit heavier than you may expect, it is more of a medium pull with a very short take up and then somewhat unexpected release due to the medium to heavy pull. Quick shot succession should be achievable though due to the short trigger pull length.

Accuracy: Well we will have to find out in my followup Field Test Shooting Video Review? And I really hope that this pistol is in working order so I am able to bring that review to you shortly. I am expecting it to produce around 400 fps and some decent accuracy with its rifled barrel.

• Checkout my Field Test Shooting Review for the Daisy Power Line 2003 Blowback Pellet Pistol.

Build Quality: The Daisy Power Line 2003 Blowback Pellet Pistol is made in the US and is primarily a plastic built air pellet pistol, it does have some metal internal parts along with the screws, barrel, cross-bolt safety and CO2 Tab. Fit and finish seem to be fairly decent, in terms of reliability I have no idea but my hopes are high. I have heard that this pistol can jam if not using pellets that are agreeable with it.

Realism: The Daisy Power Line 2003 Blowback Pellet Pistol is not really a replica so to speak, it does kind of resemble a bloated version of a Browning High Power but is much larger and out of proportion when comparing the two of them. The actual mechanical aspects of this gun are not like any other gun I have every come across, specifically when it comes to the 35 shot rotary magazine as the pellets spiral internally from front to back. The single action blowback mechanism is also very unique to an airgun pellet pistol, it has been said that this pistol can be converted to full auto but I have no intensions of doing so.

Reviewed by: ReplicaAirguns.com

Pros:

• If you have a Power Line 2003 then you have a really rare gun from Daisy.

• True single action Blowback operation.

• One of the only Pellet Pistols that can be converted to full auto.

• High capacity 35 round pellet magazine. 

• Made in the US.

Cons:

• No longer in production.

• Kind of large for a pistol, not true to scale.

• Mostly plastic build materials

• None adjustable sights. 

Comments:

I have had an interest in the Daisy Power Line 2003 for some time but did not know how or if I would ever get my hands on one and lucky for me it finally happened :) The main interest here is simply that it is the only pellet pistol I know of that has a true single action blowback operation and to top things off it has a 35 round magazine! Sure there is the implication that it can be converted to full auto but for me I really want to keep this pistol in factory condition, I have other guns that shooting in full auto if I feel the urge to go Rambo on anything ;) Definitely stay posted for my Field Test Shooting Review for this rare Daisy pellet pistol.

My Vimeo Table Top  Review of the Daisy Power Line 2003 Blowback Pellet Pistol:

Buy Daisy Products in Canada

Buy Daisy Products in the US