Entries in How To,Blank Gun

My Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2014

2 Comments

It's that time once again for an end of the year Gun Collection video. And no I will not be showing off all of my guns, to show and explain them all (Approximately 200 or so?) would simply take a really long time to make and a really long time for you to watch ;)

So like last years Gun Collection Video, I take a look at some of my favorite guns from 2014.

Here is a list of the guns featured in this Collection Video with links to their original reviews: 

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blank Gun, Blowback, CO2, Comparison, Full Auto, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, YouTube Video Tags:

Bruni Mod. 92 Top Venting 8mm PAK Blank Pistol Shooting Test

No Comments

My last Blank Gun Shooting video went really well, my iPhone 6 plus 720p 240 frames per second slow-mo video worked awesome and so did my newly acquired ME8 General 1911 Front Firing 8mm blank pistol.

I was hoping my Bruni Mod. 92 Top Venting 8mm PAK Blank Pistol would also perform just as well and as luck would have it, it did :) I did notice on the last round the shell kind of stayed in place and got re-chambered, not really sure what happened there but all 4 rounds fired which was my main goal and of course I caught it all in slow-motion HD!

Enjoy my Shooting Test Video of the Bruni Mod. 92 Top Venting 8mm PAK Blank Pistol and if you have not already checked out my Table Top Review of the Bruni Mod. 92 then make sure to do so.

Bruni Mod. 92.jpg
Categories: 8mm, Blank Gun, Field Test, Pistol, Review, Semi Auto, YouTube Video Tags: Beretta, Beretta M 92 FS, Bruni, Bruni Mod. 92

ME 8 General 1911 8mm PAK Blank Pistol Shooting Test

No Comments

I was really looking forward to not only shooting my recently acquired Front Firing ME 8 General 1911 8mm PAK Blank Pistol and making sure it worked as promised, but I also want to checkout the new 720p at 240 frames per second slow motion video feature on my new iPhone 6 plus!

Everything went pretty much as expected, all rounds chambered, fired and ejected without a hitch. No slide lock back on the last round but this blank gun is not designed to do that so I was not expecting this to happen :)

Enjoy my Shooting Test Video of the Front Firing ME 8 General 1911 8mm PAK Blank Pistol and if you have not already checked out my Table Top Review of the ME 8 General, then make sure to do so.

blank  8 general.jpg
Categories: 8mm, Blank Gun, Field Test, Pistol, Review, Semi Auto, YouTube Video Tags: ME, ME 8 General, Model 1911

Bruni Mod. 92 Top Venting 8mm PAK Blank Pistol Table Top Review

1 Comment

Type: Blank Pistol.

Manufacturer: Bruni.

Model:Mod. 92 (Beretta 92).

Materials: Mostly Metal with some steel parts.

Weight: 2.8 pounds unloaded. (1274 grams)

Barrel: Top Venting. (No Red Tip)

Propulsion: Gun powder.

Action: Single and double action.

Ammunition Type: 8mm P.A.K. Blanks.

Magazine Capacity: 15 rounds.

FPS: N/A.

Trigger Pull: The trigger pull on the Bruni Mod. 92 Top Venting 8mm PAK Blank Pistol is fairly decent on both single and double action with a fairly long take-up in double action and of course a much shorter lighter take-up in single action mode.

Accuracy: NA.

Build Quality: The overall build quality of the Bruni Mod. 92 Blank Pistol is good, mine does show some wear since it is an older previously owned blank gun but for the most part the wear and tear is cosmetic only, the mechanical parts all seem to be in excellent working order. Most of this blank shooter is made out of a zinc based metal with a few steel parts, mainly the screws, pins and springs. But it has an impressive weight to it! The grips seem to have been replaced with wrap around rubber grips that may actually be for a real steel Beretta M92.

Realism: The Bruni Mod. 92 8mm P.A.K. Blank Pistol is a very realistic looking Beretta 92 in terms of overall looks and true to scale size and weight. Most of the parts work as you would expect them to on the real steal version including the double and single action trigger, safety, locking slide catch release and magazine release button. The only exception really is the fact that this version is top venting so there is a small hole just in front of the breach that allows the full discharge of the blank round to escape out the top of the blank gun. The barrel is actually fully plugged but seems to have been partially drilled out to give the impression of being a front firing gun.

Purchase from: A private collector.

Pros:

  • Well made, materials fit and finish is all very good even though very little use of hardened steel.

  • 15 round double stack magazine is nice hi-capacity.

  • For a used gun it is in very good working condition, some minor wear mainly on finish.

  • Barrel has been partially bored out to look like a front firing gun.

  • Grips have been replaced with what looks to be real Beretta grips.

  • It's a very close Beretta Model 92 replica!

  • Made in Italy.

Cons:

  • Top venting instead of front firing

  • No actual take down lever for easy field striping

  • Finish is a bit worn.

Comments:

In terms of being a very accurate Beretta Model 92 replica, the Bruni Mod. 92 8mm P.A.K. Blank Pistol is very close in almost all areas. Sure I would have liked it to of been front firing but the reality is, I rarely get around to shooting my blank guns. My blank pistols are mostly for show and since actual replica only guns are prohibited, being a blank gun skirts around our Canada laws allowing for ownership. Don't forget we sell the ROHM Blank guns here in our Canada Online Store and they are very good quality guns so check them out if you are in the market for a blank shooter.

My Vimeo Full Video Table Top Review for the Bruni Mod. 92 8mm P.A.K. Blank Pistol:

Bruni Mod. 92.jpg
Categories: 8mm, Blank Gun, Comparison, Pistol, Review, Semi Auto, YouTube Video Tags: Bruni, Bruni Mod. 92

ME 8 General 1911 8mm PAK Blank Pistol Table Top Review

5 Comments

Type: Blank Pistol.

Manufacturer: ME.

Model:ME 8 General 1911 (Colt 1911 A1 Replica).

Materials: Mostly Metal with some steel parts.

Weight: 2.9 pounds loaded. (1355 grams)

Barrel: Front firing. (No Red Tip)

Propulsion: Gun powder.

Action: Single action only.

Ammunition Type: 8mm P.A.K. Blanks.

Ammunition Capacity: 10+ rounds.

FPS: N/A.

Trigger Pull: The trigger pull on the ME 8 General 8mm P.A.K. Blank Pistol is exactly what you would expect from a single action only 1911 styled semi auto pistol, short and light. But not super light, it's far from a hair trigger, perhaps more of a medium pull weight for a 1911 SAO.

Accuracy: NA.

Build Quality: The overall build quality of the ME 8 General 8mm P.A.K. Blank Pistol is really very good, nothing fancy at all going on with this pistol and a lot less actual moving parts than you would find on a real steel 1911 so much less to go wrong but the metal quality and fit and finish are very good overall. You will not find a lot of actual steel in this gun other than the magazine, screws, pins and springs but again the metal is good quality and the ME 8 General 8mm P.A.K. Blank Pistol even sports real wood grips.

Realism: The ME 8 General 8mm P.A.K. Blank Pistol is a very realistic looking 1911in terms of overall looks and true to scale size and weight. As mentioned already, many of the parts are not operational but actually moulded into the gun. Like the Safety, side trigger mounted magazine release and back strap safety. You will find the actual magazine release on the bottom of the pistol grip and even thought the slide catch release is operational, there is no spring assist to lock it in the up and open position when the magazine is empty so if you want to lock the slide back you will need to manually do this.

Purchase from: Private collector.

Pros:

  • Well made, materials fit and finish is all very good even though very little use of hardened steel.

  • 10+ round single stack magazine is very hi-capacity.

  • For a used gun it is in very good condition, not many rounds through it and well kept.

  • Front firing and came with flare adaptor.

  • Real wood grips.

  • Made in Italy.

  • It's a 1911!

Cons:

  • Slide catch release, must be engaged manually.

  • Many working parts are simply moulded into the gun.

  • Not easily field strip-able.

Comments:

So the ME 8 General 8mm P.A.K. Blank Pistol is not the most accurate replica of a 1911 in terms of all parts being operational but it hits the major ones for me like: It's front firing, the slide will lock back, it has a true 1911 SAO trigger and for the most parts it looks and works like a 1911. Finding 1911 blank guns here in Canada is super hard and I am a big fan of 1911's so when the opportunity to pickup this gun came around I was interested even if it was not cheap. Blank guns are getting harder and harder to find here in Canada and I guess that's what is making them so appealing. Don't forget we sell the ROHM Blank guns here in our Canada Online Store and they are very good quality guns so check them out if you are in the market for a blank shooter.

My Vimeo Full Video Table Top Review for the ME 8 General 8mm P.A.K. Blank Pistol:

blank  8 general.jpg
Categories: 8mm, Blank Gun, Gun Safety, Pistol, Review, Semi Auto, YouTube Video Tags: ME, ME 8 General, Model 1911

Clay Pigeons as Reactive Targets for Airguns and Airsoft Guns

2 Comments

If you have been watching my Full Auto Fun Videos, then you will have noticed that I have recently been using Clay Pigeons as my go-to targets. Generally Clay Pigeons are shot from launchers and used with shotguns since the flight of the Clay Pigeon simulates a bird in flight nicely.

So I thought, why not use them as reactive targets for my Airguns and Airsoft guns? It turns out they work pretty darn good, well at least with 4.5mm Steel BB pistols and I would imagine even better with pellet guns. What about Airsoft guns, will the Airsoft lighter weight plastic BB's have enough mass to get the job done?

You'll have to watch this video to find out the answer to that question when I unload a full magazine of .20 gram Airsoft BB's into some Clay Pigeons using my KWC .50 Desert Eagle...

 
Categories: Field Test, How To, Review, YouTube Video Tags: Desert Eagle, KWC

What is an Uncontrolled Firearm in Canada?

6 Comments

This Article and Video expresses my views and opinions on this matter and should not be taken as legal advice.

Main points covered:

  • Uncontrolled Firearms do not require a Firearms License within Canada to own and operate.

  • What is an Uncontrolled Airgun and Airsoft Gun?

  • What is an Uncontrolled Blank Gun / Starter Pistols?

  • What about Fully Automatic Airguns and Airsoft Guns?

  • What about Replica Guns?

NOTE: Controlled Firearms require a POL (Possession Only License) , PAL (Possession Acquisition License) or R-PAL (Restricted Possession Acquisition License) within Canada to own and operate. 

MEMORANDUM D19-13-2

Firearm – a barreled weapon from which any shot, bullet, or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barreled weapon and anything that can be adapted for use as a firearm.

“Uncontrolled”firearms are those devices that, although falling within the definition of a firearm in the Criminal Code, are exempt from specific legal requirements of the Firearms Act and its regulations, as well as from other legislative provisions. “Uncontrolled” firearms should not be subdivided into any of the non-restricted, restricted, or prohibited classes. The following types of firearms are deemed “uncontrolled”:

Flare, blank, rivet and industrial guns: Any device that is designed exclusively for signaling, for notifying of distress, or for firing blank cartridges or for firing stud cartridges, explosive-driven rivets or other industrial projectiles, provided that the importer intends to use it only for the purpose for which it is designed.

NOTE: (Toy guns and starter pistols do not generally qualify as firearms. However, some toy or model guns and starter pistols may be designed with very realistic mechanisms or appearances (e.g., color, size, scale, translucency) and resembling a real make and model of a firearm. In such cases, they may be considered replica firearms even if they are made of plastic, die cast zinc, or other material.)

Low muzzle velocity/energy guns: Any barreled weapon that is not designed or adapted to discharge projectiles at a muzzle velocity exceeding 152.4 meters per second (500 feet per second) and at a muzzle energy exceeding 5.7 Joules, or to discharge projectiles that are designed or adapted to attain a velocity exceeding 152.4 meters per second (500 feet per second) and an energy exceeding 5.7 Joules. Both thresholds of 152.4 mps and 5.7 Joules must be exceeded for the firearm to be considered “controlled”. This requirement exempts firearms that fire below the threshold velocity with a standard projectile, but exceed the threshold velocity when fired with a high-velocity projectile. 

Airsoft guns and certain types of paintball guns or markers may qualify as a replica firearm, if the muzzle velocity of the projectile does not cause serious bodily harm and their external features are clearly designed to resemble a specific and readily identifiable make and model of a firearm. To be considered a firearm, within the meaning of the Criminal Code, an airsoft gun must have a muzzle velocity in excess of 111.6 meters per second (366 feet per second).

NOTE: This memorandum used to state when using a .20 gram BB but does not specify this BB weight anymore?

NOTE: The term air gun is a colloquial term referring to BB or pellet guns. Such guns operate either as spring- powered, gas-powered, or electrically powered. If the muzzle velocity of the air gun is less than 152.4 mps (500 fps)/5.7 joules but still able to cause serious bodily injury to a person, it may be considered an “uncontrolled” firearm. Airsoft guns and certain types of paintball guns may qualify as a replica firearm (see paragraph 49 of this memorandum).

Replica firearms:

“Replica firearm” is defined as any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm.

For a device to be a replica firearm it must meet all three requirements:

  • (a) it cannot be a firearm, meaning it does not discharge a projectile with sufficient energy to cause serious bodily injury or death to a person. If the device is a firearm, then it cannot be a replica firearm (and vice versa);

  • (b) it must resemble exactly, or with near precision, a real existing firearm of an identifiable make and model. With respect to visual examination, note that the maximum observing distance is one at which the equivalent make and model of the firearm can be identified. This distance will vary from one firearm make to the next. For example: A Luger pistol has a very distinctive silhouette as compared to other makes and is therefore more readily identified from further away. The examination of the object is something more than casual, but less than detailed. The device does not need to be so close that markings are identifiable; and

  • (c) it cannot be designed or intended to exactly resemble, or to resemble with near precision, an antique firearm. 

RCMP Website "Air Guns"

1. Air guns that are "Controlled" Firearms for purposes of both the Firearms Act and the Criminal Code

These are air guns with both a high muzzle velocity (greater than 152.4 meters or 500 feet per second) and a high muzzle energy (greater than 5.7 joules or 4.2 foot-pounds). The "muzzle velocity" is the speed of a projectile at the instant it leaves the muzzle of a gun, normally expressed in meters per second or feet per second. The "muzzle energy" is the energy of a projectile at the instant it leaves the muzzle of a gun, expressed in joules or foot-pounds. Air guns need to meet both standards to be classified as "Controlled" firearms for purposes of the Firearms Act.

These high-powered air guns are subject to the same license and registration requirements as a conventional "Controlled" firearm. Owners and users are also required to store, transport, display and handle them safely in accordance with the regulations supporting the Firearms Act.

Usually, the manufacturer's specifications are used to determine what muzzle velocity and muzzle energy an air gun was designed to have. This information may be available in the user's manual or on the manufacturer's website. If the information is not available, individuals can call the Royal Canadian Mounted Police Canadian Firearms Program (CFP) at 1-800-731-4000 and ask to speak to a firearm technician to find out if the air gun is considered to be a firearm for purposes of the Firearms Act.

High-powered air rifles are generally classified as non-restricted firearms. However, the classification depends on the exact design of the air gun. Air rifles manufactured to resemble an assault rifle could be non-restricted, restricted or prohibited depending on the exact model imitated. High-powered air rifles would also be prohibited firearms if fully automatic or if they have a sawed-off barrel. They could also be restricted firearms if they have a folding stock that reduces the overall length to less than 660mm. 

Additional thought on this subject: Even though Uncontrolled Firearms are not governed by the same laws that apply to Controlled Firearms within the Firearms act and do not need to be handled or stored similar in the same way you are required to handle, transport and store a Controlled Firearm, we need to treat our Uncontrolled Airguns, Airsoft Guns and Blank guns with care and go over and above what is expected when had handle, transport and store them.

Categories: Airsoft, BB, Blank Gun, Full Auto, Gun Law, Gun Safety, Non Airguns, Paintball, Pellet, Pistol, Real Gun, Revolver, Rifle, YouTube Video Tags:

Do Airguns and Blank Guns Have Recoil?

No Comments

In this Vimeo video, I go over a common question I get pertaining to the recoil effect of Airguns and Blank Guns. Many people want to know if Airguns and Blank Guns have similar recoil effects to a Real Guns and if so, how much recoil will you feel from an Airgun or Blank Gun?

The short answer is yes, there is some recoil with both Airguns and Blank Guns since whenever there is a force in one direction there will be a somewhat similar force in the opposite direction creating what we feel as recoil. With Airguns since the force from the CO2 or compressed air is rather small in comparison to that of the gun powder blast from a Real Guns or even a Blank Gun, the recoil is very slight. Blank Guns have similar gun powder charges to a Real Gun and so the recoil is more noticeable but unlike a Real Gun, a Blank Gun does not really push against a sizable object like a bullet, a Blank Gun only pushes against the air in front of the barrel which has very limited resistance and so there will be much less felt recoil from a Blank Gun than the recoil from a Real Gun pushing on a heavy grain bullet.

With semi auto Guns like Blowback Pellet and BB Guns and semi auto Blank Guns, there is also the momentum and mass of the slide to consider as it moves backwards and forwards which also gives the effect of recoil and in the case of an Airgun accounts for most of the recoil felt by the shooter.

Watch my Vimeo video on this subject where I go into much more detail and explain the effect of recoil when shooting Airguns and Blank Guns:

Categories: Airsoft, BB, Blank Gun, Blowback, CO2, Comparison, GBB, Gas, Pellet, Pistol, Semi Auto, YouTube Video Tags:

How to Fix Leaking CO2 in an Airgun?

8 Comments

A very common occurrence with CO2 Airguns and Airsoft guns are leaky CO2 seals. Usually this occurs right where the CO2 cartridge connects to the main valve area. This can be either in the gun or in the magazine depending on the setup of the airgun.

There are many reasons why this can happen, but the most common reasons are a worn-out or dried up seals or even a seal that has been imprinted or misshapen from the constant pressure of the tip of the CO2 pressing against it.

When this happens you may encounter a leaking CO2, the severity of the leak can vary from mild slow leaks to leaks that can be so bad that the gun is unusable. Keep in mind there can be other problems not related to the CO2 seal such as in the valve area, the fix I show you in this YouTube video will not fix a leaking valve, you can try using something like Crosman Pellgun oil for a problem like that.

Watch my below Vimeo video where I show you how you can easily use some Plumbers Teflon Tape to improve the contact points between your CO2 and CO2 main seal and eliminate leaking CO2 in your Airgun.

Categories: CO2, How To, YouTube Video Tags:

How Long Can I Leave CO2 in My Airgun?

1 Comment

A very common question I get asked is "How Long Can I Leave CO2 in My Airgun?" So what do I do when I get asked a question over and over again... Well I make a video and give you my answer to the question.

Some CO2 Related Questions I seem to get over and over again are:

  1. Can I leave an unused CO2 in my Airgun and for how long is it safe?

  2. Can I reuse a C2 once it is empty?

  3. Can I use my gun without CO2?

In this YouTube video I address questions 1 and 2, I kind of forgot about question number 3 since it is not as often but it does come up from time to time believe it or not and the answer to being able to use a CO2 airgunwith out CO2 is "NO", It's kind of like trying to drive a car without gas, or turn on a light without electricity or stay alive without food...

So anyways, watch my below Vimeo video for answers to questions one and two:

Categories: CO2, How To, YouTube Video Tags:

Airgun Usage for Hunting and Pest Control

2 Comments

This may be a bit controversial for some people who don't like the thought of using an gun for hunting or extermination of unwanted pests. But weather or not it is accepted by all, it is a practice that many people still embrace including myself when done in a humane way.

Let's start off by addressing this topic by asking some questions and filling in some of the answers. Keep in mind I go into much more detail in my Vimeo video below.

What is the reason that you need to Shoot or Hunt an Animal?

Are you shooting an animal out of need or just for fun, sure there is a thrill in the sport of hunting but after taking down your prey, the animal should not be killed in vain as the meat should be eaten. There are also times when pesky critters get into your gardens, tree farms, feeding stations garbages and who knows what else? I personally think shooting an animal that has not done you any harm or that you don't plan on eating is not ethical. So question your motives wisely?

Can you use an Airgun for Hunting and or Pest Control?

The short answer is yes! As long as you choose the correct Airgun for the job, one that has enough power and accuracy to get the job done in a humane manner. Using an underpowered or inaccurate gun of any type for the chosen target will lead to the animal being wounded and possibly getting away to suffer unnecessarily.

What about Pistols versus Rifles?

Given the choice, a rifle will always be your best bet, rifles tend to be more accurate since they are more stable to hold and the fact that the sights are further apart which improves the guns accuracy. Most rifles also allow for enhanced sighting systems like red dots or magnified scopes for even further accuracy improvements. There are some pistols made specifically for hunting and target shooting that can be accurate but I would limit their use to shorter ranges.

What about Pellet guns versus BB guns?

BB guns in general are not meant for hunting or pest control, and in most cases they are underpowered and not as accurate as their pellet shooting counterparts, especially out at longer ranges where most pests keep their distances to. If you plan on doing some hunting and or pest control, please invest in an adequate pellet rifle to get the job done humanly.

What type of Ammo is best for Hunting and Pest Control?

There are lots of types of pellets available, pointed, rounded, flat, hollow-point and even pellets that have nylon tips. At the end of the day, use the pellet that is the most accurate in your Airgun because shot placement will win over pellet shape any day of the week. The reality is that as long as that pellet hits the target with adequate velocity, it doesn't matter what shape it is, it's more than likely going to pass right through the animal.

What is the lowest FPS that I can use?

I would rather ask the question, what is the highest fps I can get away with since more fps will give you more margin for error, since it will have a flatter trajectory and will do more damage even if your shot is off a bit. An experienced shooter could make a kill shot on a small pest even with a 400 fps airgun but the shot would have to be perfect and the range would have to be close. Of course when shooting larger game, you will need larger caliber pellets with higher velocities. Also when using a high velocity airgun you need to consider what is beyond your target, if you miss, where is that pellet or bullet going to end up? You need to make sure you do not injure anyone by mistake as pellets/bullets can travel a long distance.

How large of an Animal can an Airguns Kill?

This is really dependent on the Airgun being used, Airguns come in many different calibers, from .177 right up to .50 caliber, some PCP Airguns can even take down a deer! You need to do your research and make sure the Airgun you choose has both the power and accuracy you need for the intend prey.

Where can I use an Airgun for Hunting and or Pest Control?

This is a question you need to ask your local authorities as laws and hunting regulations are different just about everywhere. Even shooting pests on your property may require a permit so be careful to obey your local laws.

Categories: .20 cal, .22 cal, 4.5mm / .177 cal, BB, Break Barrel, Bulk Air, CO2, Comparison, Full Auto, How To, PCP, Pellet, Pistol, Rifle, Scope, Semi Auto, YouTube Video Tags:

How to Load Your Air Pistol

No Comments

In many of my reviews I show the loading process of each gun but sometimes I either skim over this part or assume most people already know how to load an Air Pistol and skip it entirely. Well as it turns out not everybody does know how to load up an Airgun or they are unclear on certain areas, like do you actually need the CO2 and how long can you leave CO2 in an airgun?

So I made a video specifically to cover how to load CO2, BB's and/or Pellets into your Air Pistol.

Now even though this video is targeted at 4.5mm Steel BB and Lead Pellet Pistols, there is a crossover with 6mm Airsoft Pistols so this video may also help an Airsoft shooter.

Our Family Bearded Dragon (Dijon) was looking rather sad and lonely today so I figured he could hang out while I made the video, he really doesn't do much of anything most of the time so why not give him a special appearance in one of the Replica Airguns Videos ;)

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, How To, Pellet, Pistol, Semi Auto, YouTube Video Tags:

Will this Ammunition Work in my Gun - Can I Convert a Blank Gun to a Real Gun?

3 Comments

Two questions that come up over and over again and to be honest I just hate answering, mainly because both of these questions to me are kind of common sense questions. I feel if someone where to stop and actually think about teh question, the answers would become obvious.

That said, common sense has to be learned somewhere and not all of us are exposed to the same life experiences so here goes...

The two questions are:

  • Will this Ammunition Work in my Gun?

  • Can I Convert a Blank Gun to a Real Gun?

The answer for both of these question is actually the same! Use the ammo made for your gun and do not try to use anything other than the ammo that was made for your gun. Do not try to modify your gun to shoot anything other than the ammo that was made for it, if you do, you may be breaking the law and could land yourself in jail. If you can follow these rules then your ammo and gun will work as intended :)

So that's pretty much it in a nutshell, watch my YouTube video below as I show you examples of ammo types with visuals on exactly why you need to use the ammo made for your gun. I also talk about the dangers of attempting to modify a blank gun to shoot some sort of real bullet and why it is a very bad idea in so many ways to try and convert a blank gun into a real gun.

rohm RG-88.jpg
Categories: Gun Law, Gun Safety, How To, Real Gun, YouTube Video Tags:

How to Align Your Gun Sights on Target

No Comments

This video should go "Hand in Hand" (pun intended) with my Best Two Handed Pistol Grip Tutorial Video that I did last year back in August. After that video I had several people ask me to talk about how to aim a gun. I guess if you have been shooting guns for a while you kind of take it all for granted but after teaching my kids the proper way to aim a gun at a target, this info is not naturally born into us ;)

This video demonstrate how and where to place your open gun sights on a target and also how you can compensate for a gun that may not be perfectly sighted in.

Categories: How To, YouTube Video Tags:

Testing Out LED Lighting with my F1 Chrony Chronograph - Take 2

No Comments

This is take 2 of my Modification to my F1 Chrony Chronograph. The purpose of this modification is to improve the low light FPS readings. In my first attempt I used LED Puck Lights but they where the kind that used flat panel LED's and they only had 4 panels per LED Puck which made each LED panel kind of bright. I did get OK with my first mod using LED Puck Lights but not as good as I would like to see.

So here we are with take 2 of F1 Chrony Chronograph LED Puck Light modification and this time around I am using standard bulb styled LED lights and to improve my chances of this working I went with and LED Puck that contained 24 LED bulb lights per puck, this way each light on it's own is a bit dimmer which I feel will give a more diffused lighting effect and hopeful consistent fps readings.

By the way I got these LED Puck Lights at my local dollar store for $2.50 each so not a very expensive modification, especially if they work.

Well... Watch the video and see how they perform...

Categories: How To, YouTube Video Tags:

Testing Out LED Lighting with my F1 Chrony Chronograph

No Comments

This video was made to show you the results I got by mounting LED puck lights to the top of my F1 Chrony Chronograph defuser panel in order to improve the low light Feet Per Second readings when using 4.5mm Steel BB's.

I have been struggling with my F1 Chrony Chronograph during the fall and winter months as tit becomes overcast and dark where I live. There have been days where I have gone out to shoot my field test shooting video and not been able to get any Chronograph fps results which is very frustrating because much time and effort goes into the planning setup of each video.

I was given advice from several of my viewers to mount an LED puck style light on the back side of my Chronograph defuser panel and that this helps the Chronograph to read much better in low light situations.

I bought a multipack of the LED puck lights from my local Costco but they did not work as well as I expected them to as they had a panel style of LED rather than the bulb shaped LED which I think may diffuse the light a bit more. My next experiments will be done using LED Puck lights but with the bulb styled LED.

You can watch my video to see how my first attempt using an LED Puck light with my F1 Chrony Chronograph worked out.

Categories: How To, YouTube Video Tags:

My Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013

6 Comments

So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.

Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!

2013 BB Pistols

2013 Pellet Pistols

2013 Airsoft Pistols

2013 Blank Pistols

2013 Rifles

Categories: .20 cal, .22 cal, .43 cal, 4.5mm / .177 cal, 6mm, 8mm, 9mm, Airsoft, BB, Blank Gun, Blowback, Bulk Air, CO2, Full Auto, GBB, Multi-pump, Paintball, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, YouTube Video Tags:

ME 9 Mini-Para 9mm P.A.K. Blank Pistol Field Test Shooting Review

No Comments

As promised, here is my Field Test Shooting Video for the ME 9 Mini-Para 9mm P.A.K. Blank Pistol. Make sure to checkout my full Table Top Video Review for more details and specifications along with some high resolution photos and of course my full video where I show you around the ME 9 Mini-Para 9mm P.A.K. Blank Pistol and even perform a field strip.

In this Field Test Shooting Review I do actually shoot the ME 9 Mini-Para 9mm P.A.K. Blank Pistol which is what many of you want to see :) I shoot 5 rounds through the ME 9 Mini-Para 9mm P.A.K. Blank Pistol until the slide locks out and capture all of this using my Nikon 1 1080p HD camera along with my Casio EX-ZR1000 slow motion 240 frames per second camera.

My ME 9 Mini-Para 9mm P.A.K. Blank Pistol even though it could be as old as 10+ years still performed perfectly with no misfires or failures to load or eject, a testament to the West German build quality!

rohm gun.jpg
Categories: 9mm, Blank Gun, Field Test, Pistol, Review, Semi Auto, YouTube Video Tags: ME, ME 9 Mini-Para

ME 9 Mini-Para 9mm P.A.K. Blank Pistol Table Top Review

No Comments

Type: Blank Pistol.

Manufacturer: ME.

Model:ME 9 Mini-Para (Similar to a S&W 469 or Shorty 40).

Materials: Mostly Metal with some steel parts.

Weight: 2.12 pounds. (960 grams)

Barrel: Front firing. (No Red Tip)

Propulsion: Gun powder.

Action: Single & double action.

Ammunition Type: 9mm P.A.K. Blanks.

Ammunition Capacity: 8+1 rounds.

FPS: N/A.

Trigger Pull: The trigger pull on the ME 9 Mini-Para 9mm P.A.K. Blank Pistol is fairly light in single action mode as would be expected and this is for the most part how you would shoot the gun since you need to rack the slide to pickup a round for the first shot. If you do decide to de-cock the hammer, you can shoot in double action but it is extremely heavy, perhaps close to 15 pounds or more! The take-up in single action is pretty short and the release is crisp. The safety is a standard firing pin block so you can release the hammer with the safety on but the hammer will hit the firing pin block first rather then strike the pin.

Accuracy: NA.

Build Quality: The overall build quality of the ME 9 Mini-Para 9mm P.A.K. Blank Pistol is similar to the ROHM German made blank pistols we sell in our Canada Replica Airguns Store. So in other words, the build quality is very good. Like most blank pistols, much of the gun is made out of zinc alloy (or pot metal) but the parts that see the most wear and tear and higher pressures are made from steel, these parts would be the barrel, magazine, magazine release, extractor, firing pin, springs and most of the screws and pins. In terms of finish, mine was picked up used and I'm not even sure how old it is? It could be as old as 20+ years? That said it is mechanically in very good conditioned even the finish is pretty good with only some minor wear.

Realism: The ME 9 Mini-Para 9mm P.A.K. Blank Pistol is a very realistic looking gun; operation, size, weight, feel and looks are what you would expect from a real gun and it almost is a real gun except that it's made to shoot blanks, not actual bullets. The ME 9 Mini-Para 9mm P.A.K. Blank Pistol is not an exact copy of any gun that I know of in production but it does share a lot of commonalities with a Smith & Wesson Shorty 40.

Purchase from: A private collector.

Pros:

  • Well made, materials fit and finish is all very good considering it was purchased used.

  • Decent amount of rounds (8+1) in its single stack magazine.

  • Steel parts where they need to be.

  • Nice light single action trigger, can also be shot in double action.

  • Made in Germany.

Cons:

  • No external slide catch release, must remove the empty magazine to release the slide.

  • Double action trigger is super heavy!

  • Very hard to find here in North America.

Comments:

When ever I find a blank gun that is unique or hard to get, it interests me. Especially if it is as good quality as the ME 9 Mini-Para 9mm P.A.K. Blank Pistol. Mine may have a few wear marks and blemishes on it since I did get it used but they are minor and I may even strip it down and refinish it at some point since this blank pistol would definitely be worthy of the time and effort involved. It's kind of unfortunate that locating one of these very fine ME 9 Mini-Para's is so hard here in Canada and the US but at least we do have the ROHM line of German made blank guns if you are in the market for such a quality blank pistol.

My Vimeo Full Video Table Top Review for the ME 9 Mini-Para 9mm P.A.K. Blank Pistol:

rohm gun.jpg
 
Categories: 9mm, Blank Gun, Pistol, Review, Semi Auto, YouTube Video Tags: ME, ME 9 Mini-Para

Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol Table Top Review

2 Comments

Type: Pellet percussion cap parlor pistol.

Manufacturer: DavidePedersoli.

Model:Derringer Guardian #11.

Materials: Mostly steel.

Weight: .34 pounds (155 grams)

Barrel: 3 1/8 inch steel rifled.

Propulsion: #11 percussion caps.

Action: Single shot, single action only.

Ammunition Type: 4.5mm BB's / .177 Caliber Pellets.

Ammunition Capacity: 1 round.

FPS: Under 500.

Trigger Pull: The trigger pull on the Pedersoli Derringer Guardian #11 is pretty light and short since it is a true single action only pistol, the majority of the pull comes from the pre-cocking of the hammer, there is next to no take-up or creep and I would say around a 2-3 pound trigger pull.

Accuracy: This part of the review is yet to be determined, I don't expect anything special here since there is no rear sight, I am guessing I will need to practice a bit with the Pedersoli Derringer Guardian to figure out how to sight it in using the rear chamber area as a sight bridge. Once I can figure it out I should get decent shot placement since the barrel is rifled. At this point I have no real idea what kind of fps to expect since I have not been able to acquire any #11 percussion caps, but I am guessing it will be just under 500 fps to stay Canada legal as an unregulated or uncontolled firearm. UPDATED FIELD TEST SHOOTING RESULTS HERE.

Build Quality: The build quality in the Pedersoli Derringer Guardian #11 is what you would expect from a true firearm, all the metal parts are actual steel, not zinc like you would find in most airguns. The only exception is the grips which are plastic. The fit and finish is very nice with gun bluing on the steel parts and very good quality control and fit throughout. The only improvement would have been actual wooden grips since the rest of the gun is so well made and finished.

Realism: The Pedersoli Derringer Guardian #11 is a Parlor Pistol designed for "indoor" shooting. (These guns were first developed in 1845 when French inventor, Louis Nicolas Flobert, modified a percussion cap to hold a small lead bullet) So in other words it is a real gun, not so much a replica. The #11 Pedersoli Derringer Guardian version is designed to shoot within our Canada Uncontrolled Firearms limitations so this pellet pistol can be sold within Canada to an adult without the requirement of a PAL Firearms license.

Reviewed by:Replica Airguns.

Pros:

  • Almost all steel construction.

  • Rifled barrel.

  • Very light single action trigger.

  • Excellent fit and finish.

  • Low cost to shoot using standard .177 lead pellets and #11 percussion caps.

  • Legal in Canada without a PAL Firearms License.

  • Smallest pellet pistol I know of!

Cons:

  • No rear sight, will take some practice to get used to.

  • Plastic grips.

  • #11 percussion caps are a bit hard to find in stock at times.

Comments:

When I came across the Pedersoli Derringer Guardian #11 I just had to have one! Heck, it's a pellet gun, and It's kind of a blank gun or cap gun all in one, it's also one of the smallest pellet guns I have ever seen. Like most of the other pellet pistols I own, it does not require a PAL or Firearms license here in Canada and can be shot in a lot more places than a "real gun" or Controlled Firearm can because of the low energy levels it produces and of course lower volume of sound it emits. I suppose it could even be shot indoors if you had the right setup in your house or garage. Definitely one of my most unique pellet pistols I own.

My Vimeo Video Review for the Pedersoli Derringer Guardian #11 .177 Caliber Pellet Pistol:

Categories: 4.5mm / .177 cal, BB, Blank Gun, Pellet, Pistol, Review, Single Shot, YouTube Video Tags: Pedersoli Derringer Guardian