Type: Pellet air rifle.

Manufacturer:Kimar.

Model:K 760.

Materials: Metal & plastic.

Weight: About 3+ pounds.

Barrel: 14 inches, metal-rifled.

Propulsion: Spring piston.

Action: Single shot.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 1 round.

FPS: 450.

Trigger Pull: The trigger pull on the Kimar Model K 760 is a bit stiff but on a beginner gun I would recommend the trigger to be on the heavy side for safety reasons and also to teach correct trigger control. It did not seem to effect my shooting at all which was nice.

Accuracy: Very good, I was surprised at the tight group I got from a semi rested position and with open sights, I nearly got a 3/4 inch group from 30 feet out which is about the best I can expect from just about any gun I have shot in the same manner. The Kimar Model K 760 spring piston break barrel rifle also shot true to it's claimed feet per second rating and got right around the 450 fps velocity mark.

Build Quality: The Kimar K 760 .177 air rifle is not going to win any prizes for style or craftsmanship but it gets the job done and in about as simple a manner as is required. With that said, what can really go wrong with it?Crank the barrel and pull the trigger. The lack of a safety does not really bother me as I never ever trust a safety and it's always good to learn how to keep a gun safe at all times even when you "believe" it is not loaded or ready to shoot. There is some plastic found on the Kimar K 760 like in the sights and the stock but the mechanical parts are all metal including the trigger.

Purchased From: The Replica Airguns Store.

Pros:

• Inexpensive spring piston rifle.

• Reasonable quality for the money.

• Synthetic stock good in all elements.

• I pump - 1 shot.

• Decent FPS, could be used on small game with practice.

• Very good accuracy even with open sights.

• Adjustable rear sight for windage and elevation.

• Very compact and easy cocking effort - good for younger shooters.

• Made in Italy

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Very basic design, no frills.

• No safety or trigger adjustments.

• No ability to mount a scope.

Comments:

Coming in at around $50, you can not ask the world from the Kimar Mod. K 760 .177 Caliber Spring Piston Rifle! What you can ask for is for decent accuracy and usable fps, and that's exactly what you are going to get from the Kimar K 760. This break barrel air rifle is really perfect for a beginner shooter on a budget or even for someone who may want to pack it around in some ugly situations where you wouldn't want to subject your high priced top quality air rifle. For the money you really can't lose with this one!

Buy this gun in Canada

Type: Pellet air pistol.

Manufacturer:Umarex.

Model:Beretta M 92FS.

Materials: Mostly metal construction.

Weight: 2.9 pounds.

Barrel: 4.5 inches, metal rifled.

Propulsion: CO2 x 1.

Action: Semi auto, single and double action.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 8 rotary magazine.

FPS: 425.

Trigger Pull: The Umarex Beretta M 92FS has a double action trigger and is extremely nice in both single and double action mode with the single action having the lightest pull. As this gun uses a rotary magazine, the first part of the trigger motion not only cocks the hammer but also rotates the internal 8 shot magazine.

Accuracy: I shot this air gun from 20 feet away in a free standing position at my target, and it performed well getting a mainly tight grouping with a few flyers possibly because of the awkward camera mount position I was using. I removed the camera and shot another 4 magazines in double action and was able to keep most of the pellets in a 1.5 inch group. My Chrony testing with an eight shot averaged result was 363 fps using 6.9 grain RWS pellets.

Build Quality: This is an almost all metal air gun with excellent fit and finish and a nice heavy 2.9 pound weight to it. It's made in Germany, so you know it's a quality product? The only non-metal parts to speak of are the grips which are a hard plastic or real wood depending on what version of this gun you have. The mechanics of this gun are very fluid.

Realism: The Umarex Beretta M 92 FS is a licensed replica of the real Beretta M 92FS semi auto pistol. It looks very close to the real steel with the exception of the break in the slide where the rotary magazine is accessible.

Purchased From: Used.

Pros:

• All metal construction - good weight and very solid feeling gun - 2.9 pounds!

• German made!

• Comes in a nice hard-shell case.

• Very nice looking gun with in the Matte black - Blued finish and in the two-tone Nickel.

• Adjustable rear sight for windage.

• Double and Single Action trigger, very smooth and light in both actions.

• Ambidextrous safety just like the real steel.

• Good accuracy, decent FPS for a pellet shooing pistol and very good usage of CO2 (12 magazines).

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• More expensive then many entry level guns but much higher quality.

• The sights are a bit hard to see when shooting on certain darker backgrounds.

• Engraving on the right side of the gun is a bit loud on the black version.

Comments:

I have to say I pretty much like most everything about this airgun; Its size, its looks, it's German build and quality and the ease in which it shoots. The Umarex Beretta M 92 FS air pistol along with the other German made Umarex rotary magazine air pistols are one of those airguns I think everyone should save up for just to have the pleasure to own and shoot. There is nothing to substitute quality and a gun like this will not only give you teh pride of ownership but also years and years of shooting enjoyment.

My Vimeo Video Review for this quality German made Beretta M 92FS Airgun:

Buy similar gun in Canada   -   Buy this gun in the US

Type: Pellet air pistol.

Manufacturer:Xisico.

Model:XSP180.

Materials: Metal & plastic.

Weight: 2.5 pounds.

Barrel: 9.1 inches, metal-rifled.

Propulsion: Spring piston.

Action: Single shot.

Ammunition Type: .22 caliber pellets. (Also available in .177 caliber)

Ammunition Capacity: 1 round.

FPS: 400+.

Trigger Pull: The trigger pull on the Xisico XSP180 is amazing right out of the box. You actually have to be very carful because it doesn't take much to release it. I like mine setup this way but you can adjust it to your shooting style.

Accuracy: Very good, I was expecting to do much worse as I am far from a spring piston expert shooter. Even though I'm not as comfortable on the springers, I found the XSP180 easy to shoot even with the heavier spring piston kick. From 30 feet out I was able to get a tight 1 inch group shooting from a semi rested position. The Xisico XSP180 surprised me yet again with 470 fps average velocities even in the large .22 caliber version I was using.

Build Quality: The Xisico is priced on the lower end for a target pistol and because of this uses perhaps a bit more plastic then similar styled pistols. That said I found the plastic to be good quality and the gun had good overall weight to it. There are times when plastic is better suited then metal and I felt it was used well in this gun. Of course there is metal internally and externally but the main shell is primarily made out of plastic. All the moving parts worked well and felt nice and tight. I did not feel any concern that this gun would let me down.

Realism: The Xisico XSP180 is not a replica of any gun that I know of but it does have a modern look to it with its elongated design and ergonomic features.

Purchased From: The Replica Airguns Store.

Pros:

• Inexpensive spring piston target pistol.

• Reasonable quality for the money.

• I pump - 1 shot.

• Comes in .177 and .22 caliber version.

• Excellent FPS even in .22 caliber, well above claimed.

• Very good accuracy.

• Modern looking and ergonomic design.

• Adjustable Trigger.

• Adjustable Sights with fiber optics.

• Under barrel rail mount for laser or tactical light. (may work with a sight rail)

• Comfortable form fitting grips

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Lots of plastic but looks to be durable.

• Grip shape will only work for right handers.

• No top rail for a red dot or scope.

• Safety is a bit tuff and on the ridged side.

Comments:

I wasn't expecting the world from this spring piston break barrel pistol because it is a more price conscience gun and yes it may not be as refined as the Webley Alecto I also reviewed but I have to say it performed well and exceeded my expectations in most every way. First off, when the manufacturer claims 400 fps from the .22 caliber version this usually means the absolute best case scenario! I used medium grain pellets and still got some amazing chronograph results from this spring piston shooter right up into the 470 fps range. Secondly, being a springer with a heavy recoil, I figured it would effect my shot placement but again I was surprised and shot as tight a group as I can expect from any pistol with open sights from 30 feet out. lastly, again if you can get your head around the plastic, this gun feels well made and I would expect a lot of good times shooting with it for many years. If you're on a bit of a budget but want a compact shooter you can target shoot with or even take down small to medium sized pests, then grab yourself a Xisico XSP180.

Sometimes you just got to make a video because you can and because it's just plain old fun! And that's why I made this video of me shooting some cans with dual full auto BB machine guns. One is my full auto converted and trusted Cybergun Mini UZI and the other is my newly acquired ZMZ Tyrex PPA-K-01 Russian Machine Pistol.

So sit back and enjoy, I know I did :)

Buy this gun in Canada   -   Buy this gun in the US

Type: BB machine gun.

Manufacturer:ZMZ.

Model:Tyrex PPA-K-01.

Materials: Steel.

Weight: 3.24 pounds.

Barrel: 4.83 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi & full auto, single action.

Ammunition Type: 4.5mm steel BB.

Ammunition Capacity: 25 round magazine.

FPS: 328-394 fps.

Trigger Pull: The trigger pull on the ZMZ Tyrex PPA-K-01 is a bit on the heavy side even though it is single action only. In full auto mode this doesn't really matter too much, but in semi auto the heavy trigger can slow down how fast you can shoot your followup shots. You quickly forget about it though because you are having so much fun shooting the Tyrex :)

Accuracy: I was very impressed with the Tyrex PPA-K-01 BB machine guns accuracy in both semi and full auto. I was actually expecting it to do poorly in this area because of the sights, they are inverted or in other words when you are shooting with the stock open, the peep sight would be best suited and when shooting with the stock folded, the pistol "V" sight would be best suited. Unfortunately the setup is backwards on the BB gun version, perhaps a mixup in manufacturing? I may attempt to switch this around at some point. Even with hard to use sights, the Tyrex shot a 1.5 inch 8 shot group in semi auto from 20 feet out and a very respectable full auto burst grouping.

Build Quality: The ZMZ Tyrex PPA-K-01 is not going to win any beauty contests and it's a bit rough around the edges but everything about it is made to last. It's virtually all steel with the exception of the grips and when I say steel, I mean the real hard stuff they put in actual firearms. You won't find any zinc in this BB gun! The Tyrex feel solid and tight with no slop in the moving parts at all, and when you shoot it, it feels like the real thing, minus the loudness and extra recoil of course.

Realism: The Tyrex PPA-K-01 is a very close copy of the Kedr PP-91 (9 x 18 mm Makarov) which is also made in the Russian ZMZ factory. You can tell them apart visually by the grips but other then that they are virtually the same! Based on the quality of the steel used in this gun I would bet money that the BB gun version is made in the same assembly plant and using the same steel.

Purchased From: Private sale

Pros:

• All "Steel" construction - Good weight and very solid gun.

• Fit of the parts is very good.

• Heavy blowback action.

• Semi and full auto selectable with a nice high rate of fire in full auto.

• Good accuracy in both semi and full auto.

• Very Accurate Kedr PP-91replica.

• Pretty easy operation.

• The folding stock works very well and is very secure.

• Not too bad amount off shots for this style - About 2-3 25 round magazines.

• If you can find one you will be the only kid on the block with a Tyrex for sure!

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Non adjustable sights.

• Peep and "V" sight should be the other way around.

• CO2 access can be a bit finicky and be very careful when removing it!

• Finish is a bit rough but about what you would expect from many Russian made guns.

• Supper hard to find and if you do find one you will pay a lot of money for it.

Comments:

I have been wanting to get my hands on the ZMZ Tyrex PPA-K-01 BB machine gun for some time now and I was willing to pay dearly for it! I am very happy with this purchase not just as a collector piece but one that I plan to take out and shoot often. Here in Canada the real version of this gun is completely unobtainable so this will have to do and even better yet I can shoot it in my backyard! The Tyrex PPA-K-01 is very pleasing to shoot and sounds more like a suppressed real gun then a BB gun adding to the enjoyment of shooting the Tyrex. Perhaps one day I'll swap the rear sight around and really see how well this BB gun shots?

My Vimeo Video Review for the  ZMZ Tyrex PPA-K-01 4.5mm BB shooting machine gun:

xProductThumbnail('productid=2930700');

Cybergun Mini UZI (Limited Time Sale - $20 OFF)

C$159.00

xAddToBag('productid=2930700');

I took a look at the Halloween Costume Contest Giveaway videos again and really found it hard to pick a winner so I'm going to ask for your help to make up my mind. I have narrowed the Halloween Costume Videos down to my top 5 picks and have listed them here for you to view and pick your favorite one.

Please watch them all before you decide and for those that did not make the top five, you all did a great job and thanks for taking the time to make a video!

The voting will be open for three days (Ends November 19th at midnight)
 

My Costume (Soviet Shock Trooper)

Replica Air Guns Halloween Contest

SwitchingToMac Halloween Costume Contest Entry

Replicaairguns.com Costume Contest Entry

GHOST.MP4

Please Pick Your favorite video!!

	My Costume (Soviet Shock Trooper)
	Replica Air Guns Halloween Contest
	SwitchingToMac Halloween Costume Contest Entry
	Replicaairguns.com Costume Contest Entry
	GHOST.MP4
Web Polls

Hey everyone, this Youtube video is to let you know a bit about what I have been up to these days and some of my plans for the near future.

It has been getting really busy for me lately and when things don't go exactly as I want them to, the work kind of piles up. So I have recruited some help with some of the backend business related duties to help enable me to be able to spend more time making videos and also respond to the many questions and product inquiries I get each day.

In this video I talk a bit about the recent BB AK-47Police raid and seizure that I was caught up in and a bit on how I was effected by it.

I also let you know about some up-coming new product Categories and products that will add nicely to some of the goodies you will be able to purchase in the Replica Airguns Store.

So make sure to watch this video for all the latest Replica Airguns news!

If you haven't already checked out the main review for the RAP4 - RAP5 BB Machine Gun then make sure to read it also. This "update review" is to cover a few extra things that I didn't include in the main review like a comparison of the RAP5 to my Umarex MP5K PDW and some more video of the RAP5 shooting some cans in full auto and recorded in slow motion.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I have also had some more time to play around with the RAP5 BB gun and get an idea of how many shots you can expect using the dual 12 gram CO2 adaptor and I also tried putting two BB's inside one shell to see how 42 rounds would work shooting in full auto.

Buy similar gun in Canada   -   Buy similar gun in the US

I have found one of the more confusion aspects of guns is what defines the trigger action, and I confused this a lot at first but now feel I have a good understanding of what makes a gun Single Action Only, Double Action Only or Single and Double Action.

Your best bet is to watch my attached Vimeo video as it not only describes trigger actions but also has the added benefit of the visual examples of each type of trigger action.

Here is a very quick explanation of what constitutes each type of trigger action:

First off the action is based on the role of the trigger in how it effects the action, not how the slide or the hammer can effect the action of the gun.

A Single Action Only gun does one action (a single action) and that is generally the releasing of the hammer or striker or what have you... Single Action Only guns can not fire without first manually pre-cocking the external hammer or manually pulling the slide or charging handle back first to chamber a round and also pre-cock the action of the gun. Keep in mind that the blowback of the slide or bolt in semi and full auto guns effectively cocks the action of the gun allowing for single action trigger release.

A Double Action Only gun performs dual functions, the pre-cocking of the hammer or striker in the first stage and the releasing of the hammer or striker in the second stage, therefore performing two actions. Double Action Only guns do not have the ability to pre-cock the hammer or striker fully and therefore generally have a heavier trigger pull as the first stage of the trigger is to cock the sprung hammer or internal action.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Single and Double Action guns have the ability to do both, meaning they can be pre-cocked and then fired or fired without pre-cocking simply by pulling the trigger.

Keep in mind that there are some guns that fall in to their own category, take for example the Glock. Glock has been known to actually describer their guns as Double Action Only, when in fact they can not be fired without the slide first being pulled back to partially pre-cock the internal striker - similar to a single action gun. But when you pull the trigger on a Glock you do not simply release the action but rather the trigger first pulls the striker action back the final stage in order to release it, similar to a double action gun.

Again, watch my Vimeo video as I hope the visuals will help you to understand the differences between Single Action Only, Double Action Only and Single and Double Action trigger.

Make sure to also checkout my update video for the RAP4-RAP5 where I compare the RAP5 to my Umarex MP5K PDW and also take out a bunch of cans...

Type: BB machine gun.

Manufacturer: RAP4.

Model: RAP5 (H&K MP5).

Materials: Metal & Polymer.

Weight: 6-7 pounds.

Barrel: 9.5 inches, metal non-rifled.

Propulsion: CO2 or bulk air.

Action: Semi & full auto, single action.

Ammunition Type: .4.5mm steel BB.

Ammunition Capacity: 21 round magazine.

FPS: 400fps.

Trigger Pull: The trigger pull on the Real Action Paintball RAP5 feels kind of like an on/off switch, even though it is not an electronic switch it kind of feels like one a bit and it seems to need some CO2 or Air pressure in order to operate. Once the pressure is there, you can engage the trigger. The trigger is fairly short and nice and light.

Accuracy: I was pretty impressed with the RAP5 BB machine guns overall accuracy. I did not have to play around to much with my Red Dot scope to get it on target and keeping it on target is easy to do in both semi and full auto modes. I was especially impressed with how well it stayed on target in full auto mode. I like the fact that it pumps out BB's very quickly and they go exactly where you want them too go.

Build Quality: I was very impressed with the overall build quality of the RAP5, it has lots of metal parts exactly where they would be metal on the real MP5 giving the RAP4-RAP5 BB machine gun a very solid feel. Even the magazines feel solid and are made with metal. I was bit concerned about how the RAP5 would feed and shoot the BB & casing combination but it really seemed to work well and the combined full auto and ejecting casings makes the RAP5 a total gas to shoot!

Realism: The RAP5 BB machine gun is extremely realistic, you can even mix and match real H&K MP5 accessory parts! The only way you can tell its not the real steel is the small ejection port where the .43 caliber casings fly out, and they really come out with some momentum! Other then that this BB machine gun is very realistic in how it operates, looks and feels.

Purchased From: RAP4 (Real Action Paintball)

Pros:

• Extremely realistic replica of a real H&K MP5.

• Lots of metal on this gun.

• Ejecting casings makes for a realistic experience.

• Semi and full auto selectable with a nice high rate of fire in full auto.

• Can customize with actual MP5 add on parts. (stocks, rails, grips)

• Good accuracy even in full auto mode.

• Can use either CO2 or bulk-air power sources.

• Decent 400fps for a full auto machine gun.

Cons:

• Not a cheap gun!

• Hunting down the ejected casings can be a bit of a chore but they are not expensive to buy.

• .43 caliber ejection port on the side is a bit of a giveaway.

• Would have liked more options of power-sources when purchasing. (Dual 12 gram CO2 adaptor should come standard)

Comments:

When I heard about this BB machine gun, I new I had to have it and mostly because of the way it feeds and ejects the shell casings, much like a real gun! I'm also a big fan of the H&K MP5 styled rifle and PDW version. I was genuinely impressed with everything about this BB shooter; design, quality, realism and shoot-ability and I hope to one day get the RAP4 (M4 styled) version of this gun which uses the same feeding mechanism. If you want the most realistic looking and operating full auto 4.5mm BB machine gun you can get then this is really it.

Buy similar gun in Canada 

Buy similar gun in the US

Type: .22 caliber rifle.

Manufacturer:ISSC.

Model:MK22.

Materials: Metal & Polymer.

Weight: 6.5 pounds.

Barrel: 16 inches, metal rifled.

Propulsion: Gun Powder.

Action: Semi auto, single action.

Ammunition Type: .22LR caliber rimfire.

Ammunition Capacity: 22 round magazine.

FPS: 1,138 - 1255.

Trigger Pull: The trigger pull on the ISSC MK22 is fairly short with a bit of noticeable break point in it but overall is pretty light. I get the feeling that this may be a striker based action because of the slight tension before the release.

Accuracy: I put about 300 rounds through the ISSC MK22 and took some time getting used to how it felt and also sighting in the sights on my 4 power scope. Once I felt comfortable I setup a new target and placed a full magazine (22 shots) all with in a 2 inch group from 20 yards out (60 feet). I was in a seated position using and elbow based rest. I was very happy with these results.

Build Quality: To me the ISSC MK22 SCAR clone feels like the real deal, it's not till you load it up and fire off a few rounds that you can even tell you are shooting the .22 caliber rimefire version. The MK22 has a lot of metal parts and the fit and finish is very good. You do have to use quality .22 caliber ammo in this guns for the best results because it can be a bit picky and also make sure to also take a bit of extra time when loading your magazines to ensure the ammo is set well to the back of the magazine. I'm not saying you can't use the cheap box ammo but you will have to be prepared to clear a few rounds from time to time.

Realism: It doesn't get any more real than this, the ISSC MK22 is basically an FN SCAR in a smaller cheaper .22LR caliber. But if you want to spend $3000 on the real thing and several hundred dollars per day at the range in ammo then get the full NATO round firing version. Unfortunately my pocket book does not allow for this and I don't think we can even get the larger caliber versions here in Canada. I also go to an indoor range that allows .22 caliber rifles to be used alongside the pistols which makes getting out and using the ISSC MK22 that much easier.

Purchased From: ???

Pros:

• One fifth the price of the NATO round firing version to purchase and operate.

• Mostly metal construction with good usage of polymer in the right places to keep it light.

• Lots of rails to mount just about any type of accessory you can think of.

• Nice high capacity 22 round magazine to keep the shoots going.

• Versatile flip up multi position sights for pistol or rifle based target acquiring.

• Fully adjustable stock with three length positions and check hight position, can also be folded in.

• Most bad ass looking .22 caliber rimefire rifle around.

• Made in Germany

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Not the Cheapest .22LR on the market in this category but well worth the added price tag.

• Can be a bit picky about which bullet's you use in it and how you load the magazine.

• The rear stock cheek rest is a bit high when using the pistol sights or a low rise scope, you may need a riser under your scope.

Comments:

As you know, I don't do a lot of actual "real gun" reviews, the ones that use gun powder and shoot lead bullets. I do have a very soft spot for the .22 caliber rifles for a few reasons. Firstly, they are usually more inexpensive to buy and also to shoot as the ammo is only a fraction of the cost of the larger caliber ammo. .22 rimefire guns can also be shot in more areas and at most gun ranges so you are more likely to get better use out of it in the long run. The ISSC MK22 FN SCAR clone is definitely the most impressive .22 caliber tactical styled rifle you can get, at least in Canada and even though it is at the top of the price rang in it's category it is well worth it because it is really a very high quality gun at a reasonable price.

My Vimeo Video Review for the ISSC MK22 FN SCAR Type .22LR:

This may be "News" to some of my regular visitor but if this is your first time here, (perhaps after reading one of the CBC News article related to the imported BB shooting AK-47 airguns). I  would like to welcome you to the Replica Airguns website.

• Replica AK-47 BB guns allowed into Canada
• BB gun inspections to be beefed up at border

First off, Canada is still a somewhat free country and this gives us all the right to freely peruse our legal hobbies and passions even if they are not fully understood by others. For those of you that do not understand what this website is about, I respect that but I also want you to know that your opinion is not all that important to me and most of the people like me that enjoy collecting and shooting replica airguns and blanks guns.

Owning guns in Canada is still our legal right and with this right comes great reasonability, just like driving a car or even drinking alcohol within ones limits. Yes people have died from gun related accidents, just like people have died from vehicles, alcohol, sports and many other mishaps that can happen to any one at any time each and every day. Life is precious and valuable and so are our rights.

The guns sold on ReplicaAirguns.com, although they may look to some to be scary and dangerous, in reality they have a very small bite. In other words, the consequences of being shot with an air gun pail in comparison to being shot by a real gun and although people have died from airguns (usually thigh powered licensed versions not sold on this website), these instances are rare. Airguns must always be taken seriously and treated like any other gun, with respect!

Air guns are one of the best ways to introduce a young person to gun safety. For the most part, it's not the educated gun people who cause the accidents, it's ignorance and stupidity and hiding your head in the sand that causes these accidents and deaths unnecessarily! My children are very young but I have already started to teach them how to respect all types of guns because one day when I am not around to tell them what to do, I know they are going to do the right thing and perhaps save the life of one of their "gun curious" friends who was "Sheltered" from guns and in so was never given the tools to treat them in a safe and respectful manor.

Anyways, this is not a debate, this is my opinion and you don't have to like it! I don't really care and I don't have to like your opionion either ;)

So what brought us to this point? I am not going to say all that much because there is an ongoing investigation and I do not want to interfere with the RCMP investigation in any way.

Here are some facts:

• This incident has not effected the Replica Airguns Store operation as the warehouse that ships the products is still fully functioning and operating at 100%.
• All items sold at ReplciaAirguns.com are legal within Canada and are imported and sold legally at the time of their sale. Everything available in the Replica Airguns Store can be sold to an adult in Canada without the need for a special licence.
• Replica Airguns is not an import company. (We purchase from other importers)
• Yes we perviously sold a legally imported BB shooting AK47 styled air gun that is now being investigated by the RCMP, as they have concerns about it being converted to a real firearm.
• If you have questions or concerns about the BB gun in question then you need to contact the RCMP and ask them your questions as I can not provide you with the answers.
• Was I raided? Yes I was, it was not fun. The police took all my stuff and it disrupted my life and my family, pretty much what you would expect from a police raid… At this time most of my personal airguns and blank guns have been returned to me. I am still waiting for my computer related items and registered firearms to be returned to me.
• I have not been charged with anything at this time and I do not believe I will be charged based on the findings and information provided to me by the police and the fact that I have not done anything wrong.
• Do I still support the police in their efforts? Yes I do! I still feel that their intensions where good even if some of their information may not have been accurate. It is unfortunate that this happened to law abiding people like me across Canada but sometimes good people get caught in the middle and all we can hope for is that in the end it all gets sorted out…

Michael Kaye

It seems like we just had a Replica Airguns Giveaway Contest... Oh - that's right we did! So why on earth is there another giveaway contest so soon? What can I say - I'm just that kind of guy and why not get into the Halloween mood by making it a costume based contest this time.

And in keeping with the theme around here, the costumes must be weapons based so basically any costume that is accompanied by a weapon of some sort is what you will need to take part in this contest. And you will have to make a short video of you in your costume and send me a video response to this Halloween Costume Contest Giveaway YouTube Video.

Here are some ideas: Police, SWAT, Military, Navy Seal, Rebel Force, Ninja, Viking... Even Cave Men had spears...

You get the idea!

The winner (Ultimately picked by me) will receive a Retay Baron HK 9mm P.A.K. Blank pistol styled after the Sig Sauer P228.

And here are the official rules...

• You need to make a video and send me a video response of you in your "Weapons Related Costume": Can be Military, Police, Rebel Force, Special Ops, Ninja, Viking, Caveman with a Spear… as long as you are in character and have a weapon of some sort!
• You need to be Subscribed to my YouTube Channel.
• You need to Favorite this video.
• You must be an adult or have your parent/s or guardians permission to accept the prize.
• Contest ends at midnight on November 15th and the winner will be announced shortly there after.
• Anyone located outside of North America will be compensated to their PayPal account the approximate value of the giveaway prize.

May the best Cop, Soldier, Rebel, Ninja, Mercenary, Viking, Cave "Person" win!

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Type: Blank Gun.

Manufacturer:Retay.

Model:CS9.

Materials: Mostly Metal.

Weight: 2 pounds.

Barrel: Semi plugged - front firing.

Propulsion: Gun powder.

Action: Semi auto single action only.

Ammunition Type: 9mm P.A.K. blanks.

Ammunition Capacity: 13+1 round magazine.

FPS: N/A.

Trigger Pull: The trigger pull on the CS9 is fairly light with a shorter pull. There is no double action on the Retay CS9 but it does have an exposed hammer making it easy to pull back and fire if you have a round already in the chamber but your gun is de-cocked.

Accuracy: N/A.

Build Quality: The build quality is similar to that of my EKOL blank guns which is what you would expect since they are both Turkish made guns. The Retay CS9 is well built and uses good quality materials with pretty decent fit and finish, this gun is mostly metal and has good heft for its small size weighing in at 2 pounds. My review unit is the Gloss black version but keep in mind we will be selling the CS9 in Matte Black and Satin only. The Retay CS9 performed very well for me and had no problems with chambering, firing and ejecting rounds when I tested it, just like the other Retay blank guns I tested before it

Realism: The Retay CS9, Smith & Wesson CS9 copy is a pretty good Smith & Wesson CS9 replica with the exception of the de-cocker and a few other minor differences. The basic gun shape and main features are similar to that of a Smith & Wesson CS9.

Purchased From: the Replica Airguns Store.

Pros:

• Good hefty 2 pound weight.

• Almost all metal build

• Black finish looks really nice on this gun - Satin would give it a nice tow tone look also.

• Decent replica of the Smith & Wesson CS9 semi auto pistol.

• Smallish gun but still holds 13+1 double stack magazine.

• Performed very well in my tests with no chambering, firing or ejection problems.

• Easy to field strip with the supplied tool.

• Fills the void the Zoraki 914 left behind in Canada.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Barrel back pressure screw needs to be removed in order to use flare adaptor.

• Could have been just a bit closer to the real CS9.

• No Manual or cleaning rod included.

Comments:

I wasn't sure about the Retay CS9 at first and kind of preferred my Retay Baron HK and Eagle over the CS9 at first but this smaller Retay has really grown on me. It's almost the perfect size yet it retains a very compact frame while still having a mid sized guns weight and magazine capacity. And as mentioned, it kind of fills the void that the Zoraki 914 left behind when it was reclassified as a prohibited firearm in Canada. I will most likely be picking myself up a Satin version of this one to go with my black Retay CS9, hey you can't lose at this very good price.

My Vimeo Video Review of the Retay Baron HK Sig Sauer P228 copy) Blank Gun:

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Type: Blank Gun.

Manufacturer:Retay.

Model:Baron HK.

Materials: Mostly Metal.

Weight: 2.3 pounds.

Barrel: Semi plugged - front firing.

Propulsion: Gun powder.

Action: Semi auto single action only.

Ammunition Type: 9mm P.A.K. blanks.

Ammunition Capacity: 14+1 round magazine.

FPS: N/A.

Trigger Pull: The trigger pull on the Retay Baron HK is about light to medium with a fairly short pull. The actual real steel Sig Sauer P228 would have both single and double action but many semi auto guns shoot in single or double action only.

Accuracy: N/A.

Build Quality: The build quality is similar to that of my EKOL blank guns which makes sense since they are both Turkish made guns. The Retay Baron HK is well built and uses good quality materials with pretty decent fit and finish, this gun is almost all metal and has good heft to it weighing in at 2.3 pounds. The matte black finish on this gun is pretty close to what you would find on a blued gun but with less shine to it, keep in mind we will be selling the Baron HK's in Matte Black and Satin. The Retay Baron HK performed very well for me and had no problems with loading, firing and ejecting rounds when I tested it.

Realism: The Retay Baron HK Sig Sauer P228 copy is a really good Sig Sauer P228 replica. The grips could even almost be swapped with a real Sig Sauer P228 grip if the screw holes where just a bit closer to the center of the hand grip. The basic gun shape and main features are almost dead on to the real Sig Sauer P228 including the de-cocker, slide catch and take down leaver. Internally the gun does differ as the Baron HK has a single action only trigger and a fixed barrel.

Purchased From: the Replica Airguns Store.

Pros:

• Good hefty 2.3 pound weight.

• Matte black finish looks close to blued finish, satin finish also available.

• Good replica of the Sig Sauer P228 semi auto pistol.

• Working de-cocker.

• 14+1 round double stack magazine similar to real steel version.

• Performed very well in my tests with no chambering, firing or ejection problems.

• Easy to field strip.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Barrel back pressure screw needs to be removed in order to use flare adaptor.

• Grips are a bit shiny and the texture takes some getting used to.

• No Manual or cleaning rod included.

Comments:

This gun for me was another must have blank shooter as I already own a real steal 9mm version of this gun (My Norinco NP-34), I just really like the look of Sig Sauer semi auto pistols! I will be getting another Retay Barron HK but this time in the satin finish. Because I have the real gun version, I was able to see how really close this gun is to an actual Sig in looks weight and handling. As a training gun, this is ideal as there is much less risk when using blank guns for practicing things like holster draws or even basic gun control drills.

My Vimeo Video Review of the Retay Baron HK Sig Sauer P228 copy) Blank Gun:

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Type: Blank Gun.

Manufacturer:Retay.

Model:Eagle.

Materials: Mostly Metal.

Weight: 3.1 pounds.

Barrel: Semi plugged - front firing.

Propulsion: Gun powder.

Action: Semi auto single & double action.

Ammunition Type: 9mm P.A.K. blanks.

Ammunition Capacity: 18+1 round magazine.

FPS: N/A.

Trigger Pull: The trigger pull on the Retay is about medium pull, it is a bit heavier in double action mode as would be expected and I found that the release is fairly near the very end of the pull. I'm pretty sure the real Desert Eagle only has single action operation but being able to shoot in both actions is kind of nice.

Accuracy: N/A.

Build Quality: The build quality is similar to that of my EKOL blank guns which makes sense since they are both Turkish made guns. The Retay Eagle is well built and uses good quality materials, this gun is almost all metal and has good heft to it weighing in at 3.1 pounds. The finish quality is typical of other Turkish guns - good but not perfect. The satin finish on this gun has a raw metal look but with a slight gold tint and a semi polished look, keep in mind we will be selling it in Matte Black, non-shiny Chrome and Nickel. The Retay Eagle performed very well for me and had no problems with loading, firing and ejecting rounds when I tested it.

Realism: The Retay Eagle Desert Eagle copy is a pretty decent Desert Eagle replica with a few small exceptions. Overall I would say it is slightly smaller than a real Desert Eagle and has a bit smaller handle which may be good for people with smaller hands and it also has 2 screws near the front of the slide on each side that would not be there on a real Desert Eagle.

Purchased From: the Replica Airguns Store.

Pros:

• Good hefty 3.1 pound weight.

• Satin finish looks good but the Nickel is going to look even better :)

• Good replica of the Desert Eagle semi auto pistol.

• Trigger is both single and double action.

• 18 round magazine is very high capacity for a pistol.

• Performed very well in my tests with no chambering, firing or ejection problems.

• It's a Desert Eagle for goodness sake - isn't that enough!

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Slightly smaller in size then a real Desert Eagle?

• The screws on the slide are a bit out of place and would look better color matched.

• Barrel back pressure screw needs to be removed to use flare adaptor

• No Manual or cleaning rod included.

Comments:

This gun was a must have blank gun for me, owning a real Desert Eagle is pretty much out of the question because they are not cheap to buy and operate. For a very small fraction of the price of a real Desert Eagle I get to own the next best thing and as a matter of fact, I may just buy one in each color since the price is very affordable! As with many of the blank guns, the Retay Eagle would make an excellent prop gun for TV or Movie scenes. And you can always impress you friends by pulling out the Retay Eagle and proclaiming "That's not a gun - This is a gun!"

My Vimeo Video Review of the Retay Eagle (Desert Eagle copy) Blank Gun:

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

I will be doing full reviews of these three Retay guns; the CS9 (Smith & Wesson CS9 Copy), Baron HK (Sig Sauer P228 Copy), and the Eagle (Desert Eagle Copy). For know I wanted to at least give you a quick preview video of them. My full review videos will focus on each Retay blank gun individually and go into detail with shooting tests and Fields Strips when possible.

My basic first impressions of this new blank gun offering from Retay is that they are a welcome addition to our current blank gun offerings here in Canada and what I like most is that all three guns are very different in look and design then the EKOL guns we have had for some time now. As far as quality goes, I would say they are on par with the EKOL guns and being that they are made in Turkey this shouldn't be too unexpected.

Keep checking back as I will be reviewing all three Retay 9mm P.A.K. blank guns over the next little while.

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Type: Pellet air pistol.

Manufacturer:Crosman & Kimar.

Model:CK92.

Materials: Mostly metal.

Weight: 2.6 pounds.

Barrel: 4.25 inches, metal rifled.

Propulsion: CO2 x 1.

Action: Semi auto, single and double action.

Ammunition Type: .177 cal. pellets.

Ammunition Capacity: 8 round rotary magazine.

FPS: 394.

Trigger Pull: The trigger pull on the Crosman - Kimar CK92 is absolutely excellent! Single action is very light and smooth and double action is almost exactly the same. The CK92 has one of the lightest and smoothest double action trigers out of all my airguns and that's saying a lot!

Accuracy: I shot the Crosman - Kimar CK92 air pistol at a target from 20 feet away in a free standing position, and it performed well getting about a two inch grouping right close to the center, just to the right. Most of the rounds stayed in a one inch group while two rounds strayed away a bit. I had a very awkward grip due to my camera mount so I know this guns should get closer to a one inch grouping with some getting used to it and using a standard grip. The rear sight is adjustable for windage and elevation so hitting the bullseye would not take much work. My Chronograph testing started out a bit rough due to the 10 year absence of shooting this gun but once I blew out some of the cobwebs it settled in at around the 350 fps mark and I was also able to get 10 magazines worth of shots before I noticed a drop in performance.

Build Quality: The Crosman- Kimar CK92 is built like a tank, it is probably one of my heaviest pellet pistols weighing in at 2.6 pounds! The build quality and craftsmanship is very nice with most of the gun being made out of metal and only a couple parts made from plastic like the grips and part of the rear sight. You can really feel the quality of this gun when you pick it up and squeeze the trigger a few times.

Realism: The CK92 pellet air pistol is a very nice copy of the real steel Beretta 92FS and considering it was made some 10 years ago when most replica air guns still looked mostly like air guns. You really have to give Crosman and Kimar credit for making this gun so close to the actual Beretta 92FS. Everything is exactly where it would normally be on the real Beretta and most of the mechanical part are functional, even if they serve a different purpose as it is an airgun after all.

Purchased From: The Replica Airguns Store.

Pros:

• The price is right, especially for this condition of collectors item!

• All metal very heavy and well made gun.

• Pellet shooting with a rifled barrel.

• Fully adjustable rear sight with windage and elevation.

• Decent accuracy and power and CO2 usage.

• CO2 screw and tab are hidden in the handle.

• Excellent trigger pull in both single and double action.

• Very good Beretta 92FS replica.

• Comes in a plastic case.

• Rare collectors opportunity.

• Made in Italy

Cons:

• Have to use narrow headed CO2, can be a bit tricky to load until you get used to it

• This is a 10 year old gun and hard to tell how reliable it will be because of its age?

• When they are gone, they are gone! No more in this kind of shape.

Comments:

This was a very different review for me to do, a part of me wanted to just put my two CK92's away in a safe place and just keep them as collectors guns but I was also very curious to see if the CK92 performed as well as it looked and felt. Curiosity got the best of me as you can see and I am glad I ended up testing at least my Chrome CK92 because it was a real joy to shoot and it didn't let me down in any way. I am not going to recommend the CK92 airgun for anyone who plans to shot it regularly because I really believe that 10 year old valves and seals have a lot more potential to fail then a new airgun and getting replacement part will not be easy for this very fine air pistol. That said, you may get lucky because it's a very well made air gun. Personally I am going to put both my Chrome and Black Crosman - Kimar CK92's in a nice safe place and treasure them like you would anything rare and valuable. I think these guns are selling at a steel of a price right now and when they are all gone I just know people will be offering me several times the price I paid for my personal Chrome and Black Crosman - Kimar CK92's, and I will tell you my answer right now... Sorry, these guns are not for sale.

Buy Pellet guns in Canada

Buy Pellets guns in the US

As promised, I went out and picked up some Reball (reusable) paintballs to try in my Tacamo T68 AK47 styled paintball rifle. I wanted to see what kind of damage they could inflict on various targets. The purpose of the Reball is mainly for practice or training use with paintball guns, they are also used in some indoor paintball facilities. Reballs have the advantage of not only being reusable but also not making a lot of mess.

Another benefit is that Reballs do not break apart and so they will deliver more energy on target which may be useful in a self defense situation with a high fps Paintball gun. Now I am not recommending these guns in any ways to be used for self defense or non-lethal use but other people have suggested it to me, and I wanted to see what these little rubber balls could do to different targets.

Keep in mind I was not looking for penetration as that is not the purpose of a "traumatic round", such as a rubber bullet. Rubber bullets are not supposed to penetrate but rather stun a person.

I found the Rubber Reball Paintballs to be about the same weight as standard paintballs and so they shoot about the same fps which in my gun was about 350 fps.

In conclusion, I would not want to be shot with a Reball out of a high fps paintball gun, as for stopping an intruder, maybe? You most certainly would be able to pick them out of a police lineup because they would be riddled with red welts :)

Buy this Paintball gun in Canada

I get a fair bit of interest and questions from people in the TV, Movie, Stage, Internet and Photo business looking for guns they can use in their productions, so I thought I would put together an informative video to show them some options available to them at least here in Canada.

The problem is a lot of times a "Gun Handler" is required, as in many cases real firearms are used and very strict guidelines need to be in place for obvious safety reasons. This is most likely the best option in the case of a Matrix styled movie and an extensive amount of guns are required in the production. What if you only need a few guns and you want to keep your budget and complications to a minimum? Well there are other options and that's where I come in.

Watch this short Promotional Video for more information if you are looking for a simplified and easy solution for your realistic gun use in Movie, Stage, Internet and Photo productions.