Entries in Gun Law,Revolver

Umarex S&W 327 TRR8 SPECIFICATIONS AND PHOTOS

1 Comment

I don't have too much in the way of specification for the Umarex S&W 327 TRR8 but I can say it pretty much looks like an ASG Dan Wesson that has been re-skinned! Something I found a bit funny with this gun si that it is supposed to be a TRR8 replica, and the real S&W 327 TRR8 is an 8 shooter and the Umarex copy is a 6 shooter! Maybe they though nobody would notice?

Specifications based on Photos and similar Dan Wesson:

  • Uses 12 gram CO2
  • 4.5mm steel BB's
  • 400-450 fps
  • Single & double action
  • 6 rounds
  • 2.25 - 2.5 Pounds
  • All metal
  • Picatinny Rail top and bottom
  • Red Dot Scope accessory
  • Fore grip accessory

Click on the pictures below to open them in a larger window.

Buy S&W 327 TRR8 in Canada   -   Buy S&W 327 TRR8 in the US

Categories: 4.5mm / .177 cal, Airgun News, BB, CO2, Pistol, Revolver, Semi Auto Tags: S&W 327 TRR8, Umarex

New Umarex products coming out soon...

4 Comments

I'm not sure which of these we will get in North America but there are some nice new Umarex products coming out in the next few months. 

Some of the 4.5mm BB Pistols featured:

I'll will post some pictures and more info on some of these guns shortly...

Here are a couple videos featuring some of these new products from Umarex:

Categories: 4.5mm / .177 cal, Airgun News, BB, Blowback, CO2, Pellet, Pistol, Revolver, Semi Auto, YouTube Video Tags: Beretta 90two, Race Gun, S&W 327 TRR8, S&W M&P 45, Umarex

EKOL ARDA 8MM P.A.K. BLANK POCKET REVOLVER REVIEW

3 Comments

Related Posts:

Type: Blank Pocket Revolver.

Manufacturer:EKOL - VOLTRAN.

Model: Arda.

Materials: Mostly Metal.

Weight: .55 pounds.

Barrel: Semi plugged - front firing.

Propulsion: Gun powder.

Action: Semi auto single action.

Ammunition Type: 8mm P.A.K. blanks.

Ammunition Capacity: 5 rounds.

FPS: N/A.

Trigger Pull: As the Arda is single action only, the trigger pull requires pre-cocking of the hammer before each shot, just like the old west six shooters.

Accuracy: N/A.

Build Quality: The build quality is similar to that of my Zoraki blank guns. The EKOL Arda pocket revolver is well built and uses good quality materials, this gun is almost all metal. The finish quality is typical of other Turkish guns - good but not perfect, the gloss black finish on the Arda looks really good and seems to have filled in most of the imperfections. You will get some powder burns in areas that the gasses escape such as between the cylinder and the beginning of the barrel.

Realism: The EKOL Arda is fairly unique, I don't know of an actual gun that it resembles? It's kind of a cross between a Derringer and a tinny snub nosed revolver.

Purchased From: the Replica Airguns Store

Pros:

  • In Canada these guns are some of the few blank guns available for purchase that are not prohibited.

  • Would make a good training gun animals (retrievers - guard dogs - police dogs) or a compact starter pistol.

  • Revolvers are always dependable, no loading or ejecting problems like you can have with some semi-autos. 

  • Extremely compact blank shooter.

  • Nice gloss black finish.

Cons:

  • 8mm P.A.K. Blank ammo is expensive.

  • Only holds 5 rounds

  • Single action only with pre-cocking required.

  • The powder from shooting will wear the finish a bit between the barrel and the cylinder.

Comments:

The EKOL Arda blank pocket revolver is a nice addition to our growing number of legal blank guns in Canada. The Arda is a very interesting looking blank pistol and it may not appeal to everyone? I found it so unique looking that I just had to have it as it's just nothing like any other blank gun I own. If you want an ultra compact pistol with revolver reliability then pick yourself up an EKOL Arda and get a small gun with a big bang!

Ekol  Gun.jpg
Categories: 8mm, Blank Gun, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: ARDA, EKOL

ASG Dan Wesson 6 inch Silver & 8 inch Black CO2 BB Revolver Review

35 Comments

Related Posts:

Type: BB air Revolvers.

Manufacturer: ASG.

Model:Dan Wesson 6 and 8 inch.

Materials: Mostly Metal.

Weight: 2.25 - 2.3 pounds.

Barrel: Metal non-rifled.

Propulsion: CO2 x 1.

Action: Revolver, single and double action.

Ammunition Type: 4.5mm BB's.

Ammunition Capacity: 6 rounds.

FPS: 426.

Trigger Pull: The ASG Dan Wesson Revolvers have predictable trigers with the single action being a bit more consistent, not just in feel but in fps also. Double action mode is very usable without a lot of extra pressure required. I found I just wanted to shoot this gun in single action mode because it felt more natural with a six shooter.

Accuracy: I shot the pair of Dan Wesson Revolvers  at a target from 20 feet away in a free standing position, and they performed well getting a 1.5 to 2 inch grouping just to the left of the target. The sights are adjustable for elevation and windage so getting these guns centered on the bullseye would be very easy. My Chrony testing with a six shot averaged result was 395 fps for the six inch and 447 fps for the 8 inch Dan Wesson.

Build Quality: These fine revolvers are extremely well built, I am beginning to think just about any product from ASG would not disappoint me, after reviewing the Dan Wesson's and CZ 75 P-07 DUTY. The Dan Wesson BB revolvers are almost all metal with just a few components made out of plastic, like the handles and CO2 screw tab. The handles feel like a cross between plastic and rubber. The finish on the six inch silver Dan Wesson is amazing and looks just like polished stainless steel. The black eight inch version has an almost metallic speckled finish without the shininess.

Realism: The ASG Dan Wesson BB revolvers are as close as you can get to a real six shooter, ASG didn't leave any detail out and thought of a few I may have never even dreamt up! Loading and ejecting actual brass shells into the cylinder makes you feel like this gun is much more then an unassuming airgun!

Purchased From: The Replica Airguns Store.

Pros:

  • It's a revolver with actual brass shells giving you the feeling of a real 6 shooter!

  • Almost all metal design.

  • lots of detail in this gun, very well made, fit and finish is excellent.

  • Good power and good accuracy.

  • Fully adjustable sights.

  • If I could have dreamt up this gun I don't think I could have done as good a job!

Cons:

  • Very hard to get this gun in North America.

  • Plastic CO2 screw tab.

  • Only shoots BB's, would have been cool to shoot pellets too.

Comments:

I'm not really a revolver person, or should I say I wasn't really a revolver person, well until I got my Dan Wessons! I felt this way because most of the air gun revolvers available look just like that - they look like air guns! The Dan Wesson BB revolvers showed me that an air gun revolver can be just as cool as any of my very realistic automatic air pistols in my collection. And if you where already a revolver fan then the Dan Wesson CO2 BB revolvers are definitely for you.

 
Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: ASG, Dan Wesson

Preview - CZ 75 P-07 DUTY - Dan Wesson Revolvers - Colt Special Combat

2 Comments

Related Posts:

Today, my ASG CZ 75 P-07 DUTY and Dan Wesson 6 and 8 inch Revolvers arrived along with an Umarex Colt Special Combat. This is kind of a big deal because all of these guns virtually don't exist here in North America. I have been wanting these guns for some time but until now, I had no way to get them! I guess the best part of having a web-store is I have a say in what we are going to carry. And lucky for me I have a really resourceful product manager who was able to locate and import these fine guns not only for myself but also for anyone else here in North America wanting to place an order for one in our Replica Airguns Store.

Let's take a quick look - I won't get too detailed as I will be doing dedicated reviews for all of these guns shortly...

The ASG Dan Wesson's:  6 inch Silver and 8 inch Black

Right off the bat, both of these guns are just flawless. Their finish and quality control is top notch. They have a good solid weight to them and all the moving parts feel tight and responsive. They offer both double and single action and come with a speed loader and six brass shells where the 4.5mm BB's are located. You also have the option of using the included accessory rail for mounting a scope or Red Dot sight.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

ASG CZ 75 P-07 DUTY

Again I was really impressed with the quality of this blowback 4.5mm BB shooter! Even though the CZ 75 P-07 DUTY has a polymer frame it has good weight to it, probably because of the metal slide and good usage of metal in other areas like its drop out 20 round metal magazine and metal even in the CO2 door. There is amazing detail and realism all over this gun, it even has the original 9x19 markings on the slide and ejection port, you would be hard pressed to tell the difference between this air gun version and the real steel without a very close inspection!

Umarex Colt Special Combat

OK, so the Colt Special Combat isn't a blowback BB pistol! Once you pick it up and take a close look at all the work that went into this gun, you will soon forget all about the blowback. The tradeoff here is more power and usable shots along with features like an all metal design, a working slide, a full size drop free metal magazine, adjustable sights and both a single and double action trigger. Having a classic 1911 that is as nice as this one in my airgun collection is a real treat!

Checkout my Vimeo Video Preview for these awesome BB Airgun:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pistol, Replica Airguns News, Revolver, Semi Auto, YouTube Video Tags: ASG, CZ 75 P-07 Duty, Colt Special Combat, Dan Wesson, Umarex

ASG CZ 75 P-07 DUTY and Dan Wesson 6 & 8 inch Revolvers Now Shipping

10 Comments

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pistol, Replica Airguns News, Revolver, Semi Auto Tags: ASG, CZ 75 P-07 Duty, Dan Wesson

ASG CZ 75 P-07 DUTY and Dan Wesson 6 & 8 inch Revolvers coming soon!

12 Comments

Related Posts:

I am really excited to let you in on some more Replica Airguns Store news. We have some really nice Air guns from ASG on order, I don't just yet have an ETA on when they will be here but should know in a little while...

First off we have the ASG CZ 75 P-07 Duty in Blowback Dual Tone:

"The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer ÄŒeská zbrojovka, Czech Republic. This is the semi automatic 4.5mm (.177) airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the BB’s are put in the drop-out magazine. The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number."

  • Length: 7.3 inches.
  • Weight: 1.8 pounds.
  • Magazine: 4.5mm BB's x 20.
  • FPS: 361.

We also have on order some ASG Dan Wesson Revolvers in 6 inch Nickel and 8 inch Black barrel Versions:

"The legendary semi automatic revolver licensed by Dan Wesson – 6” silver and 8 inch black versions. The revolver has authentic markings and an individual serial number stamped into the frame. The revolver features a double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson revolver is made of metal except for the ergonomical grip constructed in hard ABS plastic.

The 12g CO2 cartridge is stored under the grip and is easily accessed by sliding the grip to the side – easy-load style. Each of the 6 cartridges holds one BB and is placed in the metal drum that rotates as each round is fired. The revolver comes with a speed loader, changeable tactical rail and 6 cartridges."

  • Length: 11.7/13.3 inches.
  • Weight: 2.25/2.3 pounds.
  • Magazine: 4.5mm BB's x 6.
  • FPS: 426.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pistol, Replica Airguns News, Revolver, Semi Auto Tags: ASG, CZ 75 P-07 Duty, Dan Wesson

Is an Air Gun, Blank Gun, Airsoft gun a Firearm in Canada?

20 Comments

Can you tell which one is "Real" and which one is an "Air Gun"?

There seems to be a lot of confusion about what is a Firearm, especially in Canada because we have some confusing laws in this area.

First off, I am not an expert on this and this article is just my own personal understanding of how this works so don't quote me on it!

What is the definition of a Firearm? This is what Wiki says:

"A firearm is a device which projects either single or multiple projectiles at high velocity through a controlled explosion. The firing occurs by the gases produced through rapid, confined burning of a propellant. This process of rapid burning is technically known as deflagration. In older firearms, this propellant was typically black powder or cordite, but modern firearms use smokeless powder or other propellants. Most modern firearms (with the notable exception of smoothbore firearms) have rifled barrels to impart spin to the projectile for improved flight stability."

So clearly this does not include air guns because no "burning explosion" is involved.

Here is what Canada says a Firearm is for the purposes of the Canada Firearms act:

"A barrelled weapon from which any shot, bullet or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes: Any frame or receiver of such a barrelled weapon, as well as, anything that can be adapted for use as a firearm."

Notice that Canada does not limit Firearms to only include weapons that use explosions to propel a projectile. So this means that Air guns  are considered Firearms in Canada! Or does it?

In Canada we have exemptions to what is considered a regular "Controlled Firearm" that change there classification to a "Uncontrolled Firearm" and here they are: 

  • Antique firearms.
  • Devices designed exclusively for signalling, for notifying of distress, for firing blank cartridges or for firing stud cartridges, explosive-driven rivets or other industrial projectiles;
  • Shooting devices designed exclusively for slaughtering domestic animals, tranquilizing animals, or discharging projectiles with lines attached to them;
  • Air guns and other barreled weapons designed to have: A muzzle velocity of 152.4 meters per second or less and a muzzle energy of 5.7 joules or less.

So this means Airguns that shoot under 500fps and have a muzzle energy of less than 5.7 joules or 4.2 foot pounds are considered "Uncontrolled Firearms" in Canada! This is good news because if you're 18 years old, you can walk into any sporting goods store and buy an air gun. You also do not have to abide by all the strict rules and regulations a "Controlled Firearm" must.

Keep in mind that if you use an exempted "Uncontrolled Firearm" in a criminal or negligent manner then it will be considered just like a "Controlled Firearm" and your A$$ is going to jail!

What about Blank Guns? It does mention in the exemptions that devices exclusively for firing blank cartridges and/or for signaling "Flare" are also exempt.

But hold on a moment there is another law governing what Canadian law considers "Replicas":

"Replica firearms are prohibited

To be prohibited as a replica firearm, a device must closely resemble an existing make and model of firearm. If it looks like an antique firearm, as defined by the Criminal Code and Criminal Code Regulations, it is not prohibited.

The Canadian Firearms Program receives many enquiries from people wondering whether an imitation firearm would be considered a replica if it resembles a real firearm in many ways, but it is made of clear or brightly coloured plastic, or is much smaller in size.

Many of these devices need to be assessed case by case. As a general rule, however, those made out of clear plastic and those that are a lot smaller than the real firearm are not prohibited replicas. Those that are brightly coloured might be prohibited, depending on other features."

So are Blank Guns that look like real guns replicas and therefore prohibited in Canada? And does that make Replica Air Guns Prohibited too? It's all so confusing...

This is how I understand what our Canadian Gun laws to be:

Air Guns for the sake of the "Canadian Firearms Act" are considered Firearms in the first place and so they are real guns and can look like real guns, the exemption to this rule is based on the fact that they shoot under 500fps and have a muzzle energy of 4.2 foot pounds or less, not on what they look like.

Blank Guns in Canada walk an even finer line. Basically, the ones that are being allowed into the Canada at this moment are classified as "Signal" or "Flare Guns" and they all come with flare adaptors. Secondly, they are not exact replicas of real guns in existence. If you have a blank gun that is the spitting image of a real gun and/or it does not have a flare adaptor and is capable of shooting flares then you have yourself a prohibited weapon which beleive it or not is governed even tighter than an actual restricted Firearm in Canada!

The last thing I want to mention even though I don't really do the Airsoft stuff personally is: "what about Airsoft guns?"

Many Airsoft Guns start out by not being classified as a Firearm because they are not capable of causing serious bodily injury or death to a person. So if they look like a real gun or are a replica of a real gun then they are considered Prohibited. To get around this law, most Airsoft guns in Canada have clear plastic sections and also come with red tipped barrels. There are however, some Airsoft guns that shoot a .20 gram BB over 366fps upgrading them so-to-speak into the same classification as a regular (Pellet/BB) Air Gun because the increased velocity makes them potentially capable of causing serious bodily injury or death to a person. These "high fps" Airsoft guns do not require clear plasitc parts or red tipped barrels. Here is a link to some more updated information specifically on the Airsoft subject.

So now I have cleared this all up for you, or, you're just more confused then when you stated reading this article! Either way these are our Canadian Firearms laws as they pertain to Air Guns, Blank Guns and Airsoft Guns!

Categories: Gun Law Tags:

Air Gun and General Gun Safety Tips

No Comments

Disclaimer:
"This article is only intended as a guide and may not be 100% accurate, please check your areas gun laws and regulations for more information on this subject."

I want to talk about two very important Air Gun safety topics (Any gun for that matter). Those two topics are: Handling and Storing your guns.

In Canada we are required by law to take a gun operation and safety course in order to get our PAL (Possessions and Acquisitions) license. A PAL license is required to purchase firearms and ammunition but is not necessary for most BB and Pellet guns that shoot under 500 fps. Personally, I think a firearms course is a great idea for anyone to take, even if you don't plan on getting a gun but you maybe have some interest or concerns about guns.

The biggest problem with guns is the ignorance surrounding them. I'm not saying people who don't like guns are stupid, but rather that in many cases they simply don't understand guns and it scares them. What's even worse than this is when a firearms owner has no idea on how to properly handle and store their firearms. When you put both of these scenarios together you get a bad combination that in turn makes it more difficult for pro-gun and anti-gun advocates to see eye to eye.

I definitely don't want to start a debate on this issue but rather provide safety information for those choosing to own and operate guns.

General Gun Handling Tips:

  • Make sure you understand your areas gun handling laws.
  • Safety check your gun - Make sure your gun is unloaded (visual inspection) at all times unless you are ready to shoot it. (If you use the gun for home or personal defense and need it to be loaded at all times, make sure to keep it securely holstered or stored in a safe manor so that it does not fall into the wrong hands)
  • Get familiar with your gun while it is unloaded, read the owners manual, learn the workings and features of your gun until you are comfortable with it.
  • If your gun has a safety make sure you know how to operate it but do not become dependent on the safety alone.
  • Always wear eye protection and if your gun is loud, use appropriate ear protection.
  • Treat your gun likes it's loaded and off of safe mode at all times. The most dangerous gun is one that is believed to be unloaded. Many people treat unloaded guns with less respect than they do a loaded gun and pay a severe price for it when they find out the gun was actually loaded.
  • Only place your finger on the trigger of the gun when you are ready to shoot at your target. The best safety feature on any gun is your trigger finger. When you are not shooting, place your finger across the trigger guard, this acts as a physical barrier helping to protect the trigger from an accidental or unintentional misfire.
  • If you are holding the gun but it is not in use, point it slightly forward but mostly toward the ground. When on a gun range, keep your gun pointed down-range in the direction of the target at all times.
  • Always know what is behind and beyond your target and never shoot over the crest of a hill. Some ammunition can travel several miles and still be dangerous. Even a pellet or BB if shot upwards at a slight angle can travel a few hundred yard and impact a person with enough energy to inflict harm.
  • Don't use your scope as a pair of binoculars to see what is out there. Use binoculars, that's what they are for. Would you like to be at the receiving end of a set of cross-hairs?
  • When you are finished using your gun remove the ammunition, safety check and secure it.

Gun Storage Tips:

  • Make sure you understand your areas gun storage laws.
  • In Canada most  air guns that shoot under 500 fps are not required to abide by the same storage laws as licensed firearms but practicing safe gun storage for any gun is always a good idea.
  • Safety check your gun - Make sure your gun is unloaded (visual inspection) before placing in storage.
  • Make sure to have at least one level of lock prevention, this could be a gun safe or a gun trigger lock or cable lock. I recommend using a trigger lock on your gun and placing it in a gun safe. Keep your gun safe or case keys in a secure area out of sight.
  • Keep your ammunition and firearms in different locations. This is not necessary in Canada but a good general idea.
  • Keep your firearms out of sight and keep the temptation out of the picture.
  • If you have a dedicated home defense gun that you want easy access to, keep it in a gun safe beside your bed with an easily accessible touchpad combination lock. You can have a loaded magazine in the safe with your gun, just not in the gun. (This scenario is Canada Gun Law Friendly!)
  • Gun storage laws when transporting your firearm are often different than when storing a gun in your home, make sure you understand these laws in your area. For example: In Canada we have to have an "ATT" transportation permit (Authorization to Transport) that allows a gun holder to transport their firearm from their home and to the range and/or to a gun smith. Any detours from point A to point B must be within reason. (No dropping by the bar on the way home from the gun range) Furthermore, licensed pistols must be unloaded and trigger locked in a hard shell case that also has a lock on it. Ammunition is not allowed in the case with the gun in transport and your gun needs to be in the trunk of your car or in an out of sight area if you have a truck.

Hopefully you have gotten at least something out of this gun handling and storage awareness article. My hope is that many of you will take this to heart and if you don't already practice safe gun handling and storage, you will start today!

Related Links:

Please feel free to spread the word and link to this Article and YouTube video on the same subject.

Here is my YouTube Video on Air Gun and General Gun Safety Tips:

Click on Links/Photos below to BUY related Gun Safety items:

   

Categories: Gun Law, Gun Safety, YouTube Video Tags:

Zoraki 914 & R1 9mm and Kimar Lady K 8mm Blank Gun Test Fire

No Comments

Related Posts:

Below is my Vimeo Video of the Zoraki Mod.914Zoraki Mod.R1 (2.5) and Kimar Lady K Blank

Guns. I fire 9mm and 8mm P.A.K blank ammunition through these guns and even show off the Zoraki Mod.914 in full auto firing mode. In the Vimeo Videos I also slow down the video to one-quarter speed so you can really see the action of these blank guns.

Zoraki Mod.914

  • 9mm P.A.K. Ammunition

  • 14 Round Magazine

  • Semi & Full Auto Modes

  • Front Muzzle Firing

Zoraki Mod. R1

  • 9mm P.A.K. Ammunition

  • 6 Round Capacity

  • Single & Double Action

  • Front Muzzle Firing

Kimar Lady K

  • 8mm P.A.K. Ammunition

  • 6 Round Magazine

  • Semi Auto Only

  • Top Muzzle Firing

Here is the Vimeo Video of my Zoraki 914, R1 and Kimar Lady K Blank Gun Test Firing:

Blank gun.jpg
Categories: 8mm, 9mm, Blank Gun, Full Auto, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: 914, Kimar, Lady K, R1, Zoraki

ZORAKI R1 (2.5) 9mm P.A.K. BLANK REVOLVER REVIEW

12 Comments

Related Posts:

Type: Blank Gun.

Manufacturer: Zoraki - Atak Arms.

Model:Zoraki R1 2.5.

Materials: All metal with plastic grips.

Weight: 1.7 pounds.

Barrel: 2.5 inches, semi plugged - front firing.

Propulsion: Gun powder.

Action: Single and double action.

Ammunition Type: 9mm P.A.K. or 380 R Blanks.

Ammunition Capacity: 6 rounds.

FPS: N/A.

Trigger Pull: The trigger pull is good overall, even in double action mode it is smooth and not too heavy, in single action mode it is even lighter and shorter.

Accuracy: NA.

Build Quality: The overall build quality of this gun is very good. The design and materials all seem to be good quality. The cosmetics look good but when closely inspected there are small imperfections such as tool marks and some finishing blemishes. Not a big deal but if you are picky about this kind of thing then it may turn you off a bit.

Realism: This gun in theory is not supposed to be a replica of any gun in production but it does resemble many common snub nosed revolvers available such as the Rossi Snub Nosed Revolvers. It would be hard to tell the difference between the Zoraki R1 and a real snub nosed revolver even side by side. The only real tell tale sign would be if you looked at the front of the cylinder, you may notice the front bullet ports are smaller than they should be, more like a 22 caliber. The Zoraki looks and feels like a real gun, so make sure to take precautions when using this blank revolver!

Purchased From:CanadaAmmo.com.

Pros:

  • In Canada it is one of the few Blank guns available for purchase that is not prohibited.

  • All metal construction, with the exception of the grips.

  • Attractive styling, many finishing options available.

  • Well priced.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

  • Finishing detail could be better.

  • Pistol grips are hard plastic, would be better in rubber.

  • 9mm P.A.K. Blank ammo is expensive.

Comments:

The Zoraki R1 (2.5) is a nice addition to my Replica gun collection, if you are a Canadian then there are few options available to us if you want to legally own a Blank shooter. I do like the look of this Zoraki snub nosed revolver, especially in the two-tone configuration that I purchased. I'm not sure of the availability of Zoraki gun in other parts of the world but in the US there is another Snub Nosed Revolver that is virtually identical, made by the company Viper for about $99.

My Vimeo Video Review for this Airgun:

Categories: 9mm, Blank Gun, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: R1

Zoraki R1 (2.5) Blank Revolver Arrives!

8 Comments

Related Posts:

WOW! That was fast shipping from CanadaAmmo.com!!! I ordered my Zoraki R1 (2.5) Blank Revolver on Tuesday the 28th and got it today the 30th! I got my tracking number today expecting it to have an estimated arrival day sometime next week and when I checked it out it said it was already at the post office waiting for me. I don't know exactly where CanadaAmmo.com is located but from my tracking info it looks like they may be located somewhere in Vancouver BC which is very close to where I live.

I will be posting a more thorough review with Video hopefully sometime next week on the Zoraki R1 (2.5) Blank Revolver but for now I wanted to give you my first impressions with a few photos.

The gun comes in a nice box wrapped inside a plastic bag to keep the other accessories from scratching it along the way. Mine was pretty greasy and needed a wipe down and then a re-oil but that's better than dry and rusty any day. Inside the case there is a manual, a cleaning rod and a flare adaptor. I was also pleasantly surprised to see that CanadaAmmo.com gave me a FREE pack of targets (with their marketing on it of course).

The gun looks great and I love the two-tone Satin/Black finish that I selected. Mine had a few tool marks on it but over all it's not bad and I am sure it will get more marks along the way...

The gun is a good size and weight, not huge or not small either. It does not feel cheap and looks more like a real gun than a blank gun. The Canadian Zoraki R1 (2.5) Blank Revolver discharges out of the front of the barrel like my other Zoraki Mod.914 which is always very nice and more realistic.

The Zoraki R1 uses 9mm blanks and can take the standard 9mm P.A.K rounds but they seem a bit loose and may not eject properly. I believe the right ammo to use would be the Crimped Blank 9mm rounds which I do not have. (If anyone knows where I can get some 9mm crimped blanks in Canada please let me know?)

I look forward to shooting this well made Zoraki Blank gun sometime in October amongst the other Halloween explosions...

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Categories: 9mm, Blank Gun, Pistol, Revolver, Semi Auto Tags: R1, Zoraki

Blank Gun Canadian Laws

27 Comments

Related Posts:

I was kinda right about why the Zoraki Blank Guns are allowed in Canada. It's mainly because they do not closely resemble any existing model of Firearm making it a Non-Replica and a Non-Firearm. The issue with most blank shooters is that they are Replicas of existing guns. Here is the official statement I got from Vinzer Sports located in Chateauguay, Quebec Canada pertaining to what is a Firearm.

Q. What is considered to be a firearm for purposes of the Firearms Act and for offences related to the Firearms Act in the Criminal Code? 

As set out in the Firearms Act, "firearm" means: 

  • A barreled weapon from which any shot, bullet or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes.
  • Any frame or receiver of such a barreled weapon, as well as:
  • Anything that can be adapted for use as a firearm.

Following are some weapons and devices that meet the definition of a firearm but that are deemed not to be firearms for purposes of the Firearms Act and related offences in the Criminal Code. Some of these items are exempted from the definition only if they were designed exclusively for a specific purpose and are intended to be used exclusively for that purpose by the person who possesses it. However, all of the items listed below are considered to be firearms if used in a criminal or negligent manner. 

  • Antique firearms; 
  • Devices designed exclusively for signaling, for notifying of distress, for firing blank cartridges, or for firing stud cartridges, explosive-driven rivets, or other industrial projectiles.

 I hope this helps anyone else who is interested in legally purchasing and owning a Blank Gun in Canada.

Categories: 8mm, 9mm, Blank Gun, Full Auto, Gun Law, Pistol, Semi Auto Tags: 914, Zoraki