While the weather is still nice, I decided to setup some clay pigeon targets at varying further out ranges than the typically 30 feet I shoot on my deck. So I figured 40-60-80-100 foot ranges would be a good test to see if a 4.5mm Steel BB rifle could effectively hit targets at any of these ranges.
I did do a similar test earlier on using my Umarex Steel Force but I think the Steel Force may have been a bit underpowered for the 80-100 foot shots.
So today I brought out my Drozd Blackbird since it has a bit of power and what it may lack in accuracy it for sure makes up in volume! As with many of my shooting videos I captured all the fun using a bunch of different cameras and camera angles and today I even wore a dedicated lapel mic which I have a min-review for coming up shortly!
So make sure to watch my YouTube video and see how the Baikal Drozd Blackbird does shooting clay pigeons up to 100 feet away...
You guessed it, another Full Auto Fun YouTube Video! And another great Blowback BB gun from the past dusted off and brought out for some more shooting fun :)
With that said this video is me actually shooting my original Cybergun / KWC Licensed GSG 92 version that I modded to shoot full auto. It was giving me a bit of trouble today but it seemed to work out the kinks near the end.
In an upcoming Full Auto Fun Video I do plan to bring out a new KWC full auto ready M92 and Mini UZI to see how these factory full auto 4.5mm BB guns shoot out of the box.
I do have to say, modifying the PPK to Full Auto is not recommended, mine originally worked well but the heavy blowback in full auto eventually broke the firing pin setup and I lost it somewhere in my back field. I had to Macgyver a bolt in place to kind of work but now my Full Auto Modded PPK shoots out of control, what I mean by this is when I press the trigger, it does not stop shooting until all the BB's are gone. Safe, I don't think so!
My suggestion is to leave the Umarex Walther PPK as is, it truly is a an awesome CO2 Blowback BB replica with some really decent blowback recoil in a small airgun.
Full Auto Fun video number three this week and this one is perhaps the craziest one! When you take a Drozd Blackbird that already has a 800-1000 round BB magazine, convert it to 1200 rounds of full auto, add a custom JimC Barrel to it, some bulk CO2 and a bunch of other cosmetic accessories... Well you get the most ridiculous full auto BB gun you can ask for.
Since I had an extra 800-900 BB's more than I am used to when making these full auto videos, I decided to add a few additional targets over and above the clay pigeons I have been using so far. I picked up a nice fairly heavy gauge Santa tin and a rather solid hard wax candle from the dollar store that proved to add some drama to this Full Auto Fun video!
Make sure to also watch my first two Full Auto Fun videos:
If you like what you see in this video and want an absolutely crazy BB gun, then checkout our Replica Airguns Store where we Sell the Drozd BB gun and some add ons for it!
This "Full Auto Fun" video focuses on my KWC/Cybergun 4.5mm Steel BB CO2 Blowback Mini UZI BB Gun, where I kick of a short series based around shooting a bunch of 4.5mm Steel BB machine guns! Sounds like fun cause it is fun!
This KWC/Cybergun Blowback Mini UZI comes in a variety of versions, 4.5mm Steel BB and Airsoft versions, it also comes in RWS and KWC Distributed models.
In this video I basically shoot a bunch of clay pigeons positioned in various locations and film it using 4 different camera angles to spice things up a bit.
I also mention some upcoming videos where I will be shooting my RAP4 MP5 and Baikal Drozd Blackbird Full Auto BB guns so make sure to watch those video when I upload them later on this week!
In this "head to head to head" pistol shootout I compare three of my more powerful, or you could say effective air pistols against each other. Shooting at some pop cans from about 30 feet away to see how destructive each one is. I don't generally recommend air pistols for pest control simply because they tend to be less accurate and powerful than rifles, especially out at the longer ranges where a magnified scope is required and notably where the pesky vermin like to hang out.
I would have to say out of the three tested in this video comparison, the Webley Alecto in .22 caliber and the Modified Drozd Full Auto BB Gun would for sure get the job done at closer ranges. The Webley Alecto simply because it can hurl a heavy grain .22 caliber lead pellet right around the 500 fps mark which will take down small pests, again at close ranges.
My second choice or even first choice depending on how active the pest are would be my modified full auto 1200 rounds per minute Drozd that hurls 4.5mm Steel BB's at over 500 fps (under 4.2 foot pounds) at a rate of 20 BB's per second! A 4.5mm Steel BB traveling at 500 fps will penetrate fur and feathers very well and with most of the 20 BB's hitting a target in a matter of 1 second, that is going to humanly put a small to even medium sized pest down for sure. And yes the Drozd becomes a pistol when yuo take the rear stock off ;)
My last choice for the job is the Xisico XSP180 in .177 caliber since like the Webley Alecto it is only a single shot, so you got to make it count and being that it has less overall energy than the Webley Alecto again I would prefer the Alecto over the XSP180.
Watch my "head to head to head" Vimeo video to see how these three pellet pistols compare:
This topic of Blowback Airguns Versus Non-blowback Airguns comes up often so I thought I would address it a second time around since I get a lot of new visitors and subscribers daily who may not have watched my first video explanation on this topic. You can also checkout my first video on this subject since there may be some stuff I missed out in this video second video ;)
There are really two types of people asking or commenting on Blowback Airguns Versus Non-blowback Airguns. The first type of person who genuinely wants to know which is best and for what reasons. Then there is the other kind of person who makes a narrow minded statement that one type is clearly better than the other type, based on their own preferences and interests but not considering that there are other people out there with different opinions and preferences than them. You know who you are and we all know you are not going to change cause that would require an open mind...
Here is a list of the Pros and Cons I go over for each style of Airgun:
Pros:
Blowback guns simulate recoil.
Blowback guns can have better and more true triggers compared to their real steel counterparts.
Blowback guns can be better suited for action shooting.
Blowback guns are better as prop guns.
Blowback guns are generally more realistic in terms of mechanics.
Non-blowback guns generally use less CO2 per shot.
Non-blowback guns generally have higher fps.
Non-blowback guns can be more accurate.
Non-blowback guns can be more reliable.
Non-blowback guns can be less expensive.
Cons:
Blowback guns generally get less shots per CO2.
Blowback guns generally have lower fps.
Blowback guns can be less accurate.
Blowback guns can be less reliable.
Blowback guns can be more costly.
Non-blowback guns do not simulate recoil.
Non-blowback guns do not have true single action only triggers.
Non-blowback guns generally have heavier triggers that slow down shooting performance.
Non-blowback guns are generally not as good for prop use and or training.
Non-blowback guns generally are not as realistic compared to their real steel counterparts.
Watch my Vimeo video where I go into detail on Blowback Airguns Versus Non-blowback Airguns again ;)
In this Vimeo video, I go over a common question I get pertaining to the recoil effect of Airguns and Blank Guns. Many people want to know if Airguns and Blank Guns have similar recoil effects to a Real Guns and if so, how much recoil will you feel from an Airgun or Blank Gun?
The short answer is yes, there is some recoil with both Airguns and Blank Guns since whenever there is a force in one direction there will be a somewhat similar force in the opposite direction creating what we feel as recoil. With Airguns since the force from the CO2 or compressed air is rather small in comparison to that of the gun powder blast from a Real Guns or even a Blank Gun, the recoil is very slight. Blank Guns have similar gun powder charges to a Real Gun and so the recoil is more noticeable but unlike a Real Gun, a Blank Gun does not really push against a sizable object like a bullet, a Blank Gun only pushes against the air in front of the barrel which has very limited resistance and so there will be much less felt recoil from a Blank Gun than the recoil from a Real Gun pushing on a heavy grain bullet.
With semi auto Guns like Blowback Pellet and BB Guns and semi auto Blank Guns, there is also the momentum and mass of the slide to consider as it moves backwards and forwards which also gives the effect of recoil and in the case of an Airgun accounts for most of the recoil felt by the shooter.
Watch my Vimeo video on this subject where I go into much more detail and explain the effect of recoil when shooting Airguns and Blank Guns:
Another quick revisit of the KWC/Cybergun M92 Beretta - Taurus full metal, full blowback, CO2 4.5mm Steel BB pistol series. They come in several flavors but are all made by KWC and in many cases redistributed licensed by Cybergun. This Field Test Shooting Video Review focuses on the Cybergun Swiss Arms P92 version.
Now that I have a more standardized Field Test Shooting format, I though I would revisit this series of KWC/Cybergun Beretta - Taurus Replica BB Pistols and do a follow up Field Test to get some more camera angles and hopefully a nice tight target grouping using my standard semi rested position from 20 feet away.
I also incorporate some high speed video near the end of this Field Test Shooting video Review to go along with the Chronograph and target portion of the Filed Test Shooting review.
The KWC - Cybergun Full Blowback All metal serious of Replica CO2 BB Pistols has been hugely popular over here at Replica Airguns and for good reason, they are very realistic in looks and operation, are priced very respectably and replicate several of the more popular semi auto pistols.
In this Field Test Shooting Reviews I test out the ASG Ruger MK 1 Gas Airsoft Pistol and put five rounds through my Chronograph to find out what the average fps is using .20 gram BB's and propane gas. ASG claims a pretty conservative 328 fps, I was expecting much higher and got much higher even on this rather mild fall BC day.
I shoot the ASG Ruger MK 1 Gas 6mm Airsoft Pistol from the 20 foot range since I hadn't done a pre-test of any sort. While shooting from a semi rested position at 20 feet back, I was able to get a 2.5 inch 10 shot group that kind of separated its self into two sub groups, one nicely centered right in the bulls eye and then another group of four that drifted a bit high and to the right a bit. The trigger pull on the ASG Ruger MK 1 Gas 6mm Airsoft Pistol is double action only and kind of on the long side but it is very smooth and has a nice satisfying metallic click to it, I found it pretty easy to shoot.
If you are a Ruger 22LR shooter than you may just want to get your hands on one of these and have the freedom of being able to shoot it just about anywhere!
My Vimeo Field Test Video Review for the ASG Ruger MK 1 Gas 6mm Airsoft Pistol:
Ammunition Capacity: 17 round full size drop out metal magazine.
FPS: 328+ (Have heard it is much more).
Trigger Pull: The trigger pull on the ASG MK 1 is double action only which will make it a bit on the heavy and longer side, it is smooth however and does have a nice satisfying click that sounds like a firing pin being dropped. The unfortunate part is that the real steel version is a single action only trigger and one that is super short and light so the contract between the Airsoft and 22LR version may make this gun not practical is an optional training tool.
Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting tests for this pistol (Click here for the Field Test Shooting Video). I will put a link in here when I have done my official Field Shooting Test. For now all I can go on is some feedback from others that have claimed very high fps and excellent accuracy, I am looking forward to finding out for myself!
Build Quality: ASG as usually only distributes quality guns, the fit and finish is very good and there is use of metal where it needs to be like with the internal mechanical parts, the trigger, the safety, the rear fully adjustable sight and the full size drop out metal magazine that holds the gas and the Airsoft BB's.
Realism: The ASG MK 1 is based on a combination of the Ruger MK I-III, it looks mostly like the Mark III since the arrel is fairly stout but it does not have the typical taper near the charging handle area. Still it resembles a Ruger 22LR pistol very much. There is no blowback or charging handle operation so that means that only a double action trigger is possible, this is a bit unfortunate sine the real Ruger Mark III has an absolutely smooth and light single action trigger.
If you own a real Ruger 22LR it will be nice to have for some backyard or basement shooting.
Fully adjustable rear sight.
Full size all metal drop out magazine.
Metal trigger, metal safety and metal rear sight.
Very satisfying trigger sound, sounds like a real firing pin :)
Have heard it is really powerful and accurate - Yet to be determined…
Cons:
Fair amount of plastic but has an OK weigh to it.
No blowback (Would have allowed for a true single action trigger)
Safely is kind of heavy to operate but may break in over time.
Comments:
I think it may come down to how this ASG Ruger MK 1 Airsoft Pistol performs before I can give it my total thumbs up, I really wish it had a single action trigger but for a double action trigger it feels pretty good and I love the sounds of the internal hammer dropping. The fully adjustable sights mean that if this gun performs well in terms of accuracy then being able to dial it in to the bulls-eye will make it that much more enjoyable to shoot. Overall I like this pistol, the ergonomics are exactly like the real Ruger Mark III and even though much of the external build is plastic, it still has a good weight to it due to the all metal magazine and other internal metal parts.
My Vimeo Table Top Video Review for this ASG MK 1 Airsoft Pistol:
Action: Semi auto, double action only with blowback.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 15 round stick magazine.
FPS: 380.
Trigger Pull: The Double Action Only trigger pull on the Umarex Walther P99 CO2 Blowback Airsoft Pistol is long but not overly heavy for a double action trigger, it does have a break point mid way where it locks partway back, I presume this is the point in which a BB is loaded from the magazine into the barrel? The rest of the pull is still medium but much shorter with a distinct release point.
Accuracy: I did do a quick preliminary test before I made this table top review to get an idea of where this gun performs in terms of FPS and accuracy, I shot 5 rounds through my Chronograph on a fresh CO2 and got an average of 333FPS which was a bit lower than the claimed 380 but it was not the hottest of days. I also stepped back 20 feet and from a semi rested position I was able to get 9 shots within 2 inches of each other which was not bad for a DAO gun that I have never shot before. I did shoot a bit down and to the left with the set sights.
Build Quality: The Umarex Walther P99 is well built for its rather low price tag, it may not have all the bells and whistles but it does get the job done with good fit and finish and materials used. You will find a plastic/polymer frame but there is a lot of metal where it would normally be found on the real steel version like in the slide, magazine, trigger, slide catch, magazine release, inner barrel and many other internal parts. No real complaints here!
Realism: The Umarex Walther P99 CO2 Blowback Airsoft Pistol is pretty close in looks to a real steel Walther P99 with the exception of a missing decocker, but I'm pretty sure this is the same with the real steel DAO version? There is also the funny looking safety on the right side of the frame found on many Umarex airguns. I have to mention the red tip but again this can be removed and even when removed the barrel it is still recessed which adds to the realism. The Blowback action, Walther licensing and nice heavy weight all add up to make this Airsoft pistol look and feel the part.
Metal slide and internal parts gives it decent weight.
Rail for accessories.
Well hidden CO2 screw.
Walther licensing.
Recessed inner barrel.
White dot sights, easy to use.
Right amount of power for indoor CQB style airsoft games.
Cons:
Comes with a red tip even in Canada.
Double action only, so trigger is a bit heavier.
Kind of funny safety, not like the real gun.
Blowback was a bit sluggish.
Comments:
Overall the Umarex Walther P99 CO2 Blowback Airsoft Pistol is a very good buy, it's a decent replica of the real steel Walther P99 with blowback operation, lots of metal parts, good fit and finish, decent performance and full Walther licensing and trademarks. All at a very affordable price tag. It may lack some of the extras you will find on more expensive and more functional Airsoft pistols but the simplicity of the Umarex Walther P99 CO2 Blowback Airsoft Pistol means it will most likely be a bit more reliable with less to go wrong down the road. If you have been looking for a nice Walther styled replica in an Airsoft version this may be just be the ticket!
My Vimeo Video Review for the Umarex Walther P99 CO2 Blowback Airsoft Pistol:
I will be doing proper Table Top and Field Test Videos for each of these Airsoft guns as soon as I can get to them all, starting with the Umarex Gas Blowback H&K MP7 A1 Airsoft PDW so stay posted for these upcoming video reviews...
After many many requests to show how the Umarex Walther PPK CO2 Tab Modification is done I have relented to public demand. I don't actually cut my tab in this PPK CO2 Tab Modification Video but I do go step-by-step in detail and compare my modified Umarex PPK to my unmodified Umarex PPK. It is really very basic on how this is done and only a hack say and perhaps a file are all that is required to make the modifications to the PPK CO2 tab in order to make it flush with the bottom of the handle area.
Your best bet is to simply watch my YouTube Video located below and follow the steps there but here it is in text form:
Place an empty (already pierced) CO2 into your Umarex Walther PPK and tighten the unmodified CO2 tab until fully tightened, just like you would tighten a fresh CO2.
Take note at how many threads are exposed between the bottom of the handle and the top of the plastic CO2 tab, there should be about 2-4 threads exposed.
Unscrew the CO2 tab all the way, place the PPK BB Pistol so it is secure (in a vice of some sort) and use a hacksaw or dremel to shorten the CO2 screw just above the plastic tab at the thread location you previously noted. Be conservative as you can always cut or file the screw a bit shorter if your first cut was not short enough.
Now use the same hacksaw or dremel to cut a notch in the exposed cut area of the CO2 screw so that you can use a slot screwdriver to tighten the CO2 screw.
That's it - Enjoy your modified Umarex Walther PPK CO2 BB Pistol!
Watch my Vimeo Video of the Umarex Walther PPK CO2 Tab Modification Tutorial:
This is not meant to be a full review of either the BB or Airsoft version of the Cybergun - KWC CO2 Blowback Mini UZI's but I do talk about specifications, show you around both guns, and put them both through a full Field Test so I guess in a way, perhaps it can be considered to be a full review ;)
I will list the specifications here for you but I am not going to get into details like Trigger Pull, Build Quality, Accuracy and Realism. You can check out my other video reviews for more information on the Mini UZI:
As I said you can check out all my other videos for info on these very accurate Mini UZI Replicas, I mainly want to go over some of the main differences and similarities for both the BB and Airsoft versions.
In terms of build quality they are made almost exactly the same and weigh in at a hefty near 5 pounds, the only differences are the inner barrel and magazines to accommodate the different sized ammo. The BB version has a 25 round single stack magazine that does not have a follower to stop the bolt from continuing to operate even after the magazine is empty. While the 6mm Airsoft version has a double stack magazine that holds 38 rounds and does have a follower to stop the bolt which can save you some unintentional wasted CO2.
The Airsoft Mini UZI version is distributed by KWC while the 4.5mm BB version is distributed by Cybergun, you will find the UZI and IWI licensing on the Cybergun 4.5mm BB version but not on the KWC 6mm Airsoft version.
Out of the box the KWC Airsoft Mini UZI is ready to go in both semi auto and full auto while the 4.5mm steel BB version will only shoot in semi auto mode, it can however be easily modded to shoot in full auto.
Both guns come in cardboard boxes with manuals, some BB's and an Allen key to tighten the CO2. The KWC Airsoft Mini UZI also comes with a handy speed loader.
There is a slight fps velocity difference between the two with the KWC Airsoft 6mm plastic rounds traveling at around 400 fps (with .20 gram BB's) and the 4.5mm Steel BB's traveling at right around 350 fps. In the field test portion I test both guns out on some water filled cans to see how each ammo type performs in terms of penetration.
Your best bet is to watch both my Table Top and Field Test Comparison Video Reviews and see for yourself how they compare!
Trigger Pull: The trigger pull on the Cybergun Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the P226 in single action mode, the pull is light and the take-up is fairly short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action next shot, double action shots are still pretty light but much longer in order to cock the hammer.
Accuracy: Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor.
Build Quality: The build quality is generally good and I was surprised at the finish on this model as the paint is not showing any wear marks so far, the fit is good with minimal slide and barrel wobble and everything is working very well with no problems so far with a fair amount of shots through it, guess you could say I like shooting this gun :) Most of the gun is metal with only the grips and a couple internal parts being plastic.
Realism: The Cybergun Sig Sauer P226 6mm Airsoft pistol is a replica of the real steel Sig Sauer P226 right down to the licensing and it really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig and all the mechanical parts work just the same including a working de-cocker and adjustable front sight.
Seemed to shoot a bit low for me, could adjust with hop-up a bit?
Only one magazine per Gas fill.
Comments:
I am a big Sig Sauer fan so it would take a lot for me to not give this gun a good review, with that said it performed pretty well, sure it was not the most powerful but I was using gas over CO2 so I was not expecting too much, it also shot a bit low for me but again that may have been because of the barrel mod so who really knows for sure at this point ;) And yes it came with that unsightly orange tip that I took short work of removing. At teh end of the day I still love it and it performed well without letting me down, just like a would expect from a real Sig Sauer!
My Vimeo Table Top Review of the Cybergun Sig Sauer P226 GBB Blowback Airsoft Pistol:
I usually do my Table Top Video Review first but this time around I did my Field Test Video Review first since I was all setup checking out a couple other guns at the time. When I do my detailed Table Top Video Review for the Cybgergun Sig Suer P226, I'll post the link here so stay tuned. If you have not already checked out my Barrel Mod Video for this same gun then check that video out where I remover the extended orange portion of the metal barrel and make the barrel flush with the end of the slide which is how the real steel version was originally made.
Getting back to the Cybergun Sig Sauer P226 GBB blowback Airsoft Pistol field test, as per usual I test this Airsoft semi auto gas blowback pistol on the Chronograph to see what kind of real world velocity I get and since I had some Green Gas on hand, I used it for this part of the review and got an average of 315 fps with a six shot string.
I also stepped back 20 feet and shot 10 times at my stationary target using a semi rested position (sand bag up front and kneeling in the back). Even though the Sig Sauer P226 shot a bit low I did get about a 1.25 inch group with the exception of one flyer that hooked down just a bit making the 10 shot group a bit wider at just under 2 inches. The low shot placement may have been caused by my barrel mod but since I did not do a before and after test, I can not say for sure?
Make sure to watch my YouTube Video of this Field Test as it also includes some nice slow-motion of the slide blowback at both 400 and 1200 frames per second.
Watch my full Video Field Test Shooting Vimeo Video below:
I have not done my official Table Top and Shooting Reviews for the Gas Blowback Airsoft Cybergun Sig Sauer P226 but I really wanted to cut off the ugly orange painted barrel tip, it was kind of driving me crazy! keep in mind here in Canada we are not required to have orange tips on our Airsoft guns, most of the all metal or all black Airsoft guns imported these days fall into the "airgun uncontrolled firearms" category. If you live in the US or other parts of the world you could be breaking the law if you do this mod so be warned...
Your best best is to simply watch my Vimeo Video as I show you exactly how I removed the orange painted portion of the metal barrel using a hack saw, file, vice and some sand paper. All in all it was not too difficult and only took about 15 minutes to complete...
I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).
These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).
So make sure to get in on the savings and the chance to get your order free!
In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!
Ten Million Video Views Giveaway Plus CZ 75 - Glock Airsoft - Gamo Combat Pellet Revolver
Here is a sample of some of the items on sale right now...
When it comes to Airguns and Blank Guns, it's not often that an item is actually more money to buy in the US but with the Webley Alecto, it was actually more money in the US so I got to thinking, why not ship our Canada version to our US customers so they can save a few bucks! Both the US and Canada Webley Alecto are the same with only one exception, the Canada version has been detuned but this can be easily rectified with a simple valve modification (Instructions delivered after purchased from Replica Airguns).
