• Also Checkout my Field Test Shooting Review for the KJWORKS KP-09 CZ 75.

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:KJWORKS.

Model: KP-09 (CZ 75 Replica)

Materials: Metal slide & frame.

Weight: 2.1 pounds (970 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single and double action.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 24 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on the KJWORKS KP-09 CZ 75 Airsoft Replica is surprisingly light in single action but incredibly sticky at first in double action, with that said you really will not be shooting very often in double action unless you happen to de-cock the gun for some reason, at least you have the ability to shoot with the hammer down in double action when required. In signal action it took me a bit to get used to the very light trigger pull as I was letting some shots go off early.

Accuracy: I shot the KJWORKS KP-09 from 20 feet out in semi rested position and got very satisfactory results. I was able to place 10 rounds under 2 inches almost getting a 1 inch group with the exception of one flyer. Shot placement was also well centered but just a bit high which could easily be corrected by adjusting my aim point just a bit down. The KJWORKS CZ 75 Airsoft Replica shot right around the 360 fps range while conducting my 5 shot average chrony testing which is right where this gun is supposed to be. I also got three full 24 round magazines worth of shots with a bit of CO2 left over for a partial mag, so this gun can easily get 75 shots out of a 12 gram CO2 - not bad at all for this style of full heavy blowback airsoft design.

Build Quality: I am extremely impressed with the build quality of pretty much all the KJWORKS Airsoft guns, the fit and finish is the best I have seen on any of my guns including my 4.5mm steel BB shooters. Even after shooting several magazines worth of BB's, the painted metal friction areas show very light wear which is not always the case with metal built blowback airguns. (there was some wear present within the ejection port but this is common even with real steel guns as metal on metal will wear down the finish). The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining. 

Realism: The KJWORKS KP-09 6mm Airsoft pistol is a replica of the real steel CZ 75 and is a great looking and functioning copy. You will not find actual licensing on this version and the CO2 magazine does stick out a bit to accommodate the 12 gram CO2 but other than that this Airsoft pistol looks and works near exactly like the real mccoy and is full field strip-able. Even the safety operates just the same with safety available on half cock and full cock only.

Available in the:Replica Airguns Store

Pros:

• All metal pistol with good overall realistic weight to it.

• Very crisp and firm full blowback operation.

• Excellent fit and finish - best I have seen.

• Excellent fps and CO2 efficiency (three plus full 24 round magazines)

• Good accuracy and well centered on target.

• Very believable working replica of the real steel CZ 75.

• Fully field strip-able.

Cons:

• Does not have official CZ 75 licensing.

• CO2 magazine is long to accommodate the 12 gram CO2.

• Did get some finish wear in the ejection port area.

Comments:

The KP-09 CZ 75 is another wonderful full blowback Airsoft pistol from KJWORKS. The CZ 75 is a classic semi auto pistol and deserves the attention to detail the KJWORKS version demonstrates. I found the CO2 usage to be very good on the KP-09 considering the rather high 360+ fps I was abel to get with it. Top this off with high marks in the accuracy department and you have a real winner here. So if you're looking for a quality Airsoft Replica of the classic CZ 75 that shoots straight and hard and looks and operates just like the real steel version then the KJWORKS KP-09 should just do the trick for you.

Buy KJWORKS KP-09 Airsoft Pistol in Canada

Buy Airsoft Pistols in the US

Here's a heads up on some new items we will be adding to the Canada Replica Airguns Store very soon so keep checking back if you're interested in them!

Your best bet is to Watch My Vimeo Video as I go over them all and show you around the new products, but for now here is some basic info on each item:

KJWORKS HP-06 HI-CAPA CO2 Blowback Airsoft Pistol

• 6mm Plastic Airsoft BB's

• All Metal

• 2.6 pounds (1194 gram)

• CO2 Full Blowback

• 366+ fps

• 28 Round Full Size Drop Out Metal Magazine

• Single Action Only

• Full Adjustable Rear Sight

• No Red Tip

• BUY NOW

Cybergun Sig Sauer P226 GBB Blowback Airsoft Pistol

• 6mm Plastic Airsoft BB's

• All Metal

• 2 pounds (920 gram)

• Gas Full Blowback

• 366+ fps

• 26 Round Full Size Drop Out Metal Magazine

• Single & Double Action

• Sig Sauer Licensed

• Red Tip

• BUY NOW IN CANADA

• BUY NOW IN THE US

KWC Model SW40F CO2 Blowback BB Pistol

• 4.5mm Steel BB's

• Metal Slide, Polymer Frame

• 2 pounds (900 gram)

• CO2 Full Blowback

• 1.4 Joule

• 19 Round Full Size Drop Out Metal Magazine

• Single Action Only

• No Red Tip

• BUY NOW

EOTech 551 Red/Green Dot Sight (Chinese Copy)

• Comes in Black & Camo (Tan)

• 551 short Base Design

• Red & Green Reticle

• Adjustable Reticle Brightness

• Come with hood cover and Quick Release

Pittstop Magnum Power Green Gas

• High Powered

• Silicon Oil Added for Optimum Performance

• Output pressure of 115+/- PSI @ 70F (21C)

• BUY NOW

Sapien Arms GEN 2 Aluminum Propane Adapter

• Aircraft aluminum construction.

• Anodized metallic finish.

• For AirSoft use only.

• Lubricates & Cleans

• Enhances Performance

• Revolutionary design with silicon oil reservoir.

• New thread-on cap with loop for your convenience.

• Texturized body for easy grip hand-tightening.

• Sapien Logo Engraving.

• Does not need to be detached from propane tank to apply silicon oil for your convenience.

• Excellent alternative for AirSoft gas products.

• Light silicon oil not included.

• Available in five different colors!!!

Below are some more photos for your viewing pleasure - scroll down for my Vimeo Update Video:

I am happy to report back to you on all the new cool stuff I got to see at this years 2013 SHOT Show in Las Vegas. Make sure to also watch my Vimeo video at the bottom of this post for some first person styled play by play of my experience at the Vegas SHOT Show 2013. (like you're there with me ;)

First up I want to cover a new gun from ASG, I have been wanting to get my hands on the 4.5mm Bersa BP9CC and I finally got to, not only did I get my hands on it but ASG was kind enough to supply me with one to take home for review. You can get the Bersa BP9CC in both Blowback and non-blowback versions and also in either BB or Airsoft. I opted for the 4.5mm BB Blowback version. I will be reviewing this BB gun very soon!

ASG also had a very cool prototype of an Airsoft CZ Scorpion EVO 3A1 hopefully coming out soon.

While roaming around SHOT Show 2013, I came across an interesting booth from FlashFog Security. I often get people asking me about using an airgun as a home defense weapon and I strongly advise against this. If the intruder is not scared off by the gun there is little an airgun can do to actually stop them. The FlashFog system works by rapidly filling a room with dense fog combined with a strobe light effect which blinds and disorients intruders completely. There is little an intruder can do other then try and get the heck out of there!

UPDATE: FlashFog just added a new section to their website specifically for School Security to help keep our schools safer from potential safety threats! So check it out: School Security Smoke Screen

I was a bit surprised by Gamo this year, they tend to stay away from actual Replica's and generally make BB/Pellet guns that look like popular guns but not any gun in particular. Gamo has a new BB/Pellet MP9 based machine pistol that uses a similar mechanism to their P-25 and PT-85 so it can shoot both 4.5mm BB's and .177 caliber Pellets using a double ended 16 shot rotary magazine. It also has an internal blowback system so it should have some recoil feel to it! I am pretty sure it is semi auto only but still a nice addition to their lineup!

Gamo also brought out a new 4.5mm BB Blowback pistol called the C-15 which has a metal slide and plastic frame, it kind of reminds me of the Umarex HPP in how it looks and feels.

Umarex had several new products that I am sure everyone is going to like! One that I think will do really well is the Steel Force, the Steel Force is designed around the 4.5mm BB shooting Steel Storm platform so it has a 6 round burst blowback operation and holds the 2x12 gram CO2 in the magazine while the BB's go in a 300 round hopper that feeds into a 30 round spring fed internal magazine. Like the Steel Storm it will shoot around 430 fps. The Steel Force has the advantage of being styled after the AR platform so it has a collapsible stock which will make shooting very easy.

Another often asked for airgun replica is the historic German Luger. This year Umarex stepped up to the plate and introduced the Umarex P.08 4.5mm BB pistol. Sorry, no blowback or even a working slide on this one but it is all metal and has a very good weight and feel to it.

If you're a fan of the entry level Umarex XBG then you may be interested in the new Umarex T.D.P. 45 which is very similar to the XBG in looks and features but with a slightly different look to it.

If you've ever wanted to turn your pistol into more of a PDW styled gun, you may be able to depending on which Umarex gun you have? Umarex added a very cool accessory called the T.A.C Converter that converts your Umarex HK USP (BB-Airsoft), SW MP40 (BB), XBG (BB), CZ Enforcer (Airsoft) and Walther P99 DOA (Airsoft) into more of a tactical (PDW) or Personal Defense Weapon complete with for-grip, adjustable rear sight, lots of rail options and a foldable stock.

I am assuming the Crosman M4-177 Pellet/BB Rifle has been doing well for Crosman as they have expanded with some more similar assault styled air rifles. The Crosman MSR77NP pretty much looks like a classic M16 but is in fact a Nitro Piston break barrel pellet rifle able to shoot .177 caliber pellets at 1200 fps (I hope there is a 499 fps Canada version planned too?).

A new takeoff of the M4-177 is the MK-177 which also shoots .177 caliber pellets and 4.5mm BB's using a multi-Pump System but it uses an upgraded more efficient pump system that squeaks out more fps with less pumps. The Crosman MK-177 is designed after the FN SCAR and is available in an adjustable iron sight version or a Red Dot equipped kit version.

One thing you can never get enough of in my opinion is another 1911 pistol! Crosman is introducing their GI Model 1911BB Blowback 4.5mm CO2 pistol, the one they had on hand was more of a prototype so the slide was not operational but it will feature an all metal design, blowback operation, 450 fps and a 20 round drop out magazine. I am sorry to say but it looks like the Crosman C51 has been dropped from Crosman's lineup but if you want a similar styled gun you can checkout the KWC SW40F which is a very close airsoft version.

We recently started carrying G&G Armament Airsoft guns, you can checkout my review of the Xtreme 45. I did stop by their booth and they had some new products on display, the M1 Grand (all wood stock) Airsoft had it's magwell all wrapped up as G&G had a propriety magazine system they did not want their competition to see. G&G also had some very interesting targets that light up, when shot they would react by individually turning off so you could see if you hit it or not.

There was a rather large crowd at the KWA booth but it was a shared booth so it's hard to say what everyone was looking at, the KWA area was pretty full, I did talk to the KWA rep and asked him point blank if KWC and KWA where the same or sister companies and the answer was not at all. There are often a lot of guns that look like they could be from the same company, I guess there is a lot of copying going on ;) One gun from KWA I would love to get my hands on is the Kriss SMG!

Now keep in mind many of these guns I have highlighted today are not available yet and a lot of them should be coming out in the spring time frame so please try to refrain from repeatedly asking when I will review them and have them in the store, it takes time and as much as we all want them now, they get here when they get here! 

Watch my Vimeo video of the Replica Aiguns at SHOT Show Vegas 2013

I've already done a KJWORKS review on the KP-02, KP-07 and Elite 1A and they turned out to be very high quality Airsoft pistols so the extra price does get you a higher quality gun. So in this preview we are simply looking at some more models that from the looks of things I expect to be more of the same in terms of high quality and excellent functionality.

The KJWorks models we are looking at today are the KP-05 (1911 HI-CAPA), the KP-09 (CZ 75) and the M9 (Beretta M9). Even though none of them are licensed, they are very detailed and realistic copies of the original real steel versions with full blowback operation, heavy metal drop out magazines and lots of metal throughout. You would be hard pressed to tell them apart from the real powder versions.

All version in this preview load CO2 in the magazine along with 6mm Plastic Airsoft BB's, none of them have any orange markings or translucent parts as they fall into the uncontrolled firearms category here in Canada.

I look forward to doing my full review of these three very nice KJWorks Airsoft pistols.

Buy KJWORKS Airsoft Pistols in Canada

Buy Airsoft Pistols in the US

It would not be the end of another year without another Airgun, Airsoft Gun and Blank Gun Collection video for you. This year I'm not showing all my guns, I started to take them out and quickly realized there where just way too many and this years video would have been several hours long and would have taken most of the week for me to shoot and edit...

So this year I have hand picked some of my top favorites and most notable replica Airgun, Airsoft Gun and Blank Guns. They may not all be the best made or hardest shooters or even all that accurate but each one has some significants to me.

So if you have about 30 minutes to kill, then join me in this years roundup of my most favorite Collection of guns for 2012!

Watch my Vimeo Video Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2012

This Update video addresses the similarities between the KWC and Cybergun product lines, specifically the KWC Model 1911 vs. the Cybergun Tanfoglio Witness 1911 and the KWC Taurus PT99 vs. the Cybergun GSG 92. In a nutshell, they are all made by KWC and are exactly the same with the exception of some of the licensing and branding that goes on the slides. Cybergun simply contracts KWC to make the guns for them and add some slight different printing. All parts are interchangeable.

I also show you the Silver Finish Blowback Airsoft KWC Desert Eagle and mention again that the licensing on this one is kind of hit and miss depending on what KWC sends us. So when you order one there is an additional surprise waiting for you when you open the box :)

Lastly, I show for the first time a G&G Airsoft product, the G&G Xtreme 45 Blowback that looks an awful lot like the Umarex Colt Special Combat chambered in 4.5mm Steel BB. The main differences are that the Colt Special Combat is a BB gun and the Xtreme 45 is an Airsoft gun. The G&G has blowback where as the Colt Special Combat does not have blowback.

Make sure to checkout my Vimeo video of this product update for even more info!

Buy BB KWC/Cybergun Tanfoglio Witness 1911

Buy BB KWC/Cybergun GSG 92/PT99

Buy KWC Airsoft Desert Eagle

Buy G&G Airsoft Xtreme 45

Type: Airsoft Machine Pistol.

Manufacturer:ASG.

Model: ASG/KWC MP9 A3.

Materials: Metal & plastic.

Weight: 3.9 pounds.

Barrel: 5.5 inches, smooth bore.

Propulsion: GBB - Gas Blowback.

Action: Semi-full auto selectable SAO.

Ammunition Type: Airsoft 6mm Plastic BB's.

Ammunition Capacity: 48 rounds.

FPS: Up-to 375.

Trigger Pull: The trigger pull on the ASG/KWC MP9 A3 is single action only as the charging handle has to be pulled back to open and release the bolt for the first shot. There is a trigger safety but it is not noticeable when shooting this Airsoft machine gun. There is a short take-up and then a light release and short reset.

Accuracy: Right away I put my NcSTAR 1x25 Red Dot sight on the ASG/KWC MP9 A3 as it was a perfect fit for this small and compact machine pistol, it did not take long to sight it in and I was able to get decent accuracy in both semi auto and full auto burst due to the mild but very fast cycle rate. I was able to get a 2 inch grouping at 30 feet out using a rested position. In full auto mode the grouping did not really get too much wider. I also got between 350 and 370 fps when testing the ASG MP9 on my Chronograph.

Build Quality: The ASG/KWC MP9 A3 Airsoft Machine Pistol is built very well, using similar components that you would find on the real steel version so yes it has a plastic shell but that is to be expected. The ASG/KWC MP9 A3 does use lots of metal where it needs to be like in the internal parts, pins, bolt, barrel, rails and even the magazine. The fit and finish is near perfect!

Realism: I have to say the ASG/KWC MP9 A3 is pretty much a bang on copy of the real steel Brügger & Thomet MP9 A3. The only telltale sign is the ASG branding on the right side along with the 6mm caliber beside the ASG logo. One other small detail is the magazine which is metal on the Airsoft version where as you would find the real version uses a transparent polymer magazine.

Available at the:Canada Replica Airguns Store.

Pros:

• Extremely fun to shoot and it sounds awesome!

• Rate of fire is very fast and does not slow down much even when the gas is running low.

• Good overall power for a short barreled gas blowback gun.

• Very nice trigger with working trigger safety.

• Excellent replica of the real steel version in just about every way.

• Can add a lot of gear and make this gun your own.

• Decent price for all you get out of the ASG MP9!

Cons:

• Bolt didn't lock back for me when the gun got really cold?

• Real magazine would actually be transparent polymer.

Comments:

I really like the ASG/KWC MP9 A3! I love the look, I love the features and the price is also really good for what you are getting. I was really impressed with the super high cycle rate and because of the small low weight bolt the gun does not move around too much or slow down in rounds per minute even when you do a full mag dump. There is however just enough blowback recoil to give you that GBB realistic feel! I also found that the magazine holds a lot of gas so it is possible to get two magazine worth of shots out of a single fill, that's around 100 shots. I also like how easy it is to add to the ASG/KWC MP9 A3, I had mine pimped out and looking amazing right away and suggest if you get one you do the same :)

My Vimeo Video of the ASG/KWC MP9 A3 Airsoft Machine Pistol:

Buy the ASG MP9 A3 in Canada  -   Buy similar Airsoft Gun in the US

This one has to be the coolest Machine Pistols out there!

The KWA (ASG) B&T MP9 A3 Black GBB is a compact gas blowback machine pistol licensed by the original manufacturer Brügger & Thomet, Switzerland. The A3 version has a bottom rail and a folding stock and the whole body is made of reinforced fiber polymer. The whole construction of the MP9 is very realistic and it is field stripped as the real thing. The cocking handle is functional with the realistic metal bolt. The B&T MP9 has adjustable hop-up and both semi and full auto firing mode can be selected. Furthermore the trigger has an active safety function.

• Plastic 6mm Airsoft BB's
• (GBB) Gas Blow Back
• Semi & Full Auto
• 366+ fps w/ .2g
• Adjustable Hop Up
• 3.9 lbs
• 48 Round Magazine
• 11.5 Inches Folded - 20.5 Inches Open
• Reinforced Fiber Polymer Body
• Field Strips like the Real Steel
• NO CLEAR sections (All Black) and does NOT have orange tip!

Buy the ASG MP9 A3 in Canada  -   Buy similar Airsoft Gun in the US

Type: Airsoft Assault Rifle.

Manufacturer:WE.

Model: G39C.

Materials: Metal & plastic.

Weight: 6.1 pounds.

Barrel: 9.5 inches, smooth bore.

Propulsion: (GBB) Gas Blowback.

Action: Semi & full auto.

Ammunition Type: Airsoft 6mm Plastic BB's.

Ammunition Capacity: 32 rounds.

FPS: Up-to 420.

Trigger Pull: The trigger pull on the WE G39C is about what you would expect from a Single action only Semi Auto rifle, it has a very slight take up and then about a 4 pound trigger pull that is crisp and smooth.

Accuracy: Out of the Box the WE G39C shot great up close and farther out, the hop-up seemed to be already dialed in, and even though I was using only .20 gram BB's which is a bit light for this gun, I still found they tracked well and stayed on target both near and far. My 30 foot semi rested testing produced a nice 2 inch grouping. Shooting the barrel out on the tactical range I did have to aim just a bit higher when back out at 60 or more feet away. Maybe a slight bit more hop-up would do the trick.

Build Quality: The WE G39C is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, The fit and finish looked great and there is a lot of metal in and around the G39C where it would be on the real steel gun and where it is really required to be. Like the trigger, flash hider, rails, pins, switches, rear sight, magazine and most internal parts also.

Realism: I bet if you had the real G36C sitting beside the WE G39C you would be hard pressed to tell them apart? WE did a great job making this Airsoft version very believable not just in appearance but also when field stripping it and shooting it with it's heavy bolt and felt blowback recoil.

Available at the:Canada Replica Airguns Store.

Pros:

• Amazing attention to detail, just like the real H&K G36C.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal version.

• Nice high 400 FPS and good accuracy near and far.

• Full ambidextrous, even the charging handle can be switched side to side.

• Can get up to three magazines per propane fill up.

• Very well priced for how awesome it really is.

Cons:

• Some people may not like that it is a polymer built gun externally but it is what it is!

• And that's it!

Comments:

So far I have been impressed with We an Airsoft company, they really know how to make very realistic and high quality products. I wasn't sure if I was going to like the mostly polymer external build on this gun but the sheer quality and solid build took away any ideas that tis Airsoft gun would be anything like a toy. The WE G39C is one of the best performing GBB Airsoft guns I have tried out getting up to 90 shots per gas fill on a magazine which is very impressive. We was also able to keep the price down which means more people can get into one of the G39C's. If you've been thinking about adding one of these to your arsenal I don't see any reason why not to!

Buy the WE G39C in Canada

Buy Airsoft Rifles in the US

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"

Type: Airsoft GBB pistol.
Manufacturer: KSC?
Model: NAME REMOVED 17.
Materials: Plastic & metal.
Weight: 1.6 pounds.
Barrel: 4 inch, non-rifled.
Propulsion: GBB - Propane.
Action: Semi auto - single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 23 round drop out all metal magazine.
FPS: Up to 330.
Trigger Pull: The trigger pull on this Mystery NAME REMOVED 17 GBB Airsoft pistol is very nice with some take-up at the beginning but once you hit the resistance part it is smooth and the release is very light. The NAME REMOVED trigger safety actually works on this model which is a nice touch!

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Accuracy: I found the (KSC) NAME REMOVED 17 to have very good accuracy, getting about a 2 inch 8 shot grouping from 20 feet out in a semi rested position (sand bag up front, standing in the back). I also put 5 rounds through my Chrony Chronograph and this Airsoft Gas Blowback pistol averaged right around 326 fps using .20 gram 6mm plastic Airsoft BB's.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Build Quality: The (KSC) NAME REMOVED 17 Airsoft pistol uses a combination of plastic and metal and has a decent overall weight and feel to it thanks to the full size drop out metal magazine. The frame like a real NAME REMOVED is plastic but the slide and outer barrel are also plastic which on real steel NAME REMOVED would not be the case. Even so the overall weight is good and the fit and finish is very good. Even though this is a pre-owned Airsoft gun it is in as-new condition and seems to be holding up very well.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Realism: The (KSC) Airsoft NAME REMOVED 17 is very realistic in appearance and operation with all parts working exactly as they would on a real NAME REMOVED 17. Even the trigger safety works and field stripping this Airsoft gun is the same as a real NAME REMOVED. NAME REMOVED trademarks are present throughout, the only real giveaway is the plastic slide and outer barrel but you would need to examine this gun close up to see this for yourself.
Purchased privately, check out some other Airsoft guns in the Replica Airguns Store.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Pros:

• Very realistic and accurate licensing.
• Got a tight two inch group but was a bit low, hop up should get it back up.
• Decent FPS for a short barreled GBB Airsoft gun.
• Even thought the frame and slide are polymer, it has good weight to it.
• Everything works like the original, field strips and most mechanical parts are metal.
• High capacity 23 round full size drop out metal magazine.
• Adjustable rear sight for windage but is a bit lose on mine.
• Good usage of the gas - two full magazines.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Cons:

• Hard to get here in Canada.
• Mostly plastic main build - slide and outer barrel are plastic.
• Rear sight was a bit lose.

Comments:
I am hoping that someone will know for sure who make this Airsoft NAME REMOVED 17 but either way it has been great playing around with it and doing my research to see if I could find out on my own. It's hard to tell you to go out and get one because I'm not sure what to go out and get at this point or even if this version can still be purchased and if so where from? All these questions... I can tell you that it's great to finally have an actual NAME REMOVED replica in my collection, I have a few NAME REMOVED-like guns but until I got my hand on this Mystery NAME REMOVED 17 GBB Airsoft pistol I really only had close proximities. So if you have the opportunity to snatch up something like this I say go for it!

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Watch my YouTube Full Video Review of this Mystery NAME REMOVED 17 Airsoft Pistol:

Buy Airsoft Pistols in Canada  -  Buy Airsoft Pistols in the US

I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).

These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).

So make sure to get in on the savings and the chance to get your order free!

In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!

Ten Million Video Views Giveaway Plus CZ 75 - Glock Airsoft - Gamo Combat Pellet Revolver

Here is a sample of some of the items on sale right now...

Buy King Arms M4A1 in Canada 

Buy King Arms M4A1 in the US

Buy Webley Alecto in Canada

Buy Webley Alecto in the US

Buy EKOL ES55 in Canada

Buy EKOL ES55 in the US

Check out all items on Sale Now!

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:KJWorks.

Model:KP-02, KP-07, Elite A1

Materials: Metal slides & frames.

Weight: 2/2.1/2 pounds.

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 20/22/20 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.

Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.

Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.

Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.

Available in the:Replica Airguns Store

Pros:

• All metal guns with good overall realistic weights.

• Very heavy blowback on all guns, especially the KP-07 1911

• Excellent fit and finish - best I have seen.

• Nice mid range fps - great for on the field.

• Very consistent accuracy for all KJWorks Airsoft guns.

• Very believable replicas of the real steel versions.

Cons:

• KP-2 and KP-07 did not have official licensing.

• All seem to go through CO2/Gas fairly fast.

• KP-02 had a rather strange looking CO2 magazine.

• KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.

Comments:

I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There where no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!

Buy the KP-02 Airsoft Pistol in Canada 

Buy Airsoft Guns in the US

Buy the KP-07 Airsoft Pistol in Canada

Buy Airsoft Guns in the US

Buy the M9 Elite 1A Airsoft Pistol in Canada

Buy Airsoft Guns in the US

Here is a short video update along with a few photos of my KWC and Umarex Airsoft Pistols recently added to the Canada Replica Airguns Store. The models showcased are the KWC M1911 & KWC M92 (PT99) along with the Umarex Walther P99. All of these pistols use 6mm plastic Airsoft BB's, shoot over 366 fps using CO2 and have blowback operation.

Watch my Vimeo Update Video on these three Blowback Airsoft Pistols:

Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

Last but not least for now, just added to the Canada Replica Airguns Store - the KWC M92 (PT99) CO2 Blowback Airsoft Pistol.

The KWC M92 (PT99) is essentially is the Airsoft KWC version of the Cybergun GSG 92 without any branding and also in 6mm Airsoft caliber. And it comes already to shoot in either semi or full auto so no modifications required!

The KWC M92 PT99 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.

• 6mm Plastic Airsoft BB's
• CO2 Powered
• 26 round magazine
• 366+ fps
• 2.4 pounds
• 4.1 inch brass non-rifled barrel
• Single and double action
• Semi/Fully Auto Selectable
• Blowback operation
• All metal design
• Beretta FS 92 look

 Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

KWC Tanfoglio Witness 1911 Airsoft clone Added to the Canada Replica Airguns Store.

The KWC M1911 is essentially is the Airsoft KWC version of the Cybergun Tanfoglio Witness 1911 without any branding and also in 6mm Airsoft caliber.

The KWC M1911 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual 1911 sidearm.

• 6mm Plastic Airsoft BB's
• CO2 Powered
• 17 round full size drop out magazine
• 366+ fps
• 2 pounds
• 8.6 inch length
• Semi auto, single action only
• Blowback operation
• All metal design
• Government 1911 A1 replica

Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

Another Blowback Airsoft pistol added to the Canada Replica Airguns Store and this one won't break the bank!

The Umarex Walther P99, one of Walther's most popular semi auto pistols. This CO2 powered Airsoft version captures the realism with its BLOWBACK, semi-automatic action and full metal slide.

A 12g CO2 cylinder loads in the back of the grip and the Airsoft BB magazine releases with the push of a realistic magazine release lever. The recoil action made live by the power of CO2 kicks the slide back giving you that oh-so-realistic feel. A great pistol for Target, Airsoft Games and owners of the P99 or similar firearms.

• 6mm Airsoft Plastic BB's
• CO2 Powered
• 15 round drop out metal magazine
• Up to 380 fps
• 1.5 pounds
• 7.25 inch length
• Double action only
• Blowback
• Metal slide - polymer frame
• Tactical Rail Mount
• Fully Licensed
• Comes with red tip (Can be removed with a bit of work ;)

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

Last update for the day, I am happy to announce that I have added two Gas Blowback Airsoft Rifles from WE to the Canada Replica Airguns Store. They are both fantastic guns that are the spitting image of their real steel counterparts and both have awesome blowback action and feel. Both rifles shoot in semi and full auto which is exhilarating!

WE G39C (H&K G36) Open Bolt GBB Reinforced Airsoft Rifle

WE M4 CQBR Open Bolt GBB Full Metal Airsoft Rifle

Some more asked for blowback Airsoft pistols just added to the Canada Replica Airguns Store, these three are from KJWORKS and are very high quality for sure with excellent fit and finish on them!

KJWORKS P229 KP-02 Full Metal CO2 Blow Back Airsoft Pistol

KJWORKS MEU KP-07 Full Metal Gas Blow Back Airsoft Pistol

KJWORKS M9 Elite IA Full Metal CO2 Blow Back Airsoft Pistol

Two very nice KWC Blowback Airsoft Pistols where add to the Canada Replica Airguns store and yes one is the large and in charge Desert Eagle!

KWC .50 Desert Eagle CO2 Blowback Airsoft Pistol

KWC SW40F (S&W Sigma) CO2 Blowback Airsoft Pistol

I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).

I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).

And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)

So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!