In this Vimeo video, I go over a common question I get pertaining to the recoil effect of Airguns and Blank Guns. Many people want to know if Airguns and Blank Guns have similar recoil effects to a Real Guns and if so, how much recoil will you feel from an Airgun or Blank Gun?

The short answer is yes, there is some recoil with both Airguns and Blank Guns since whenever there is a force in one direction there will be a somewhat similar force in the opposite direction creating what we feel as recoil. With Airguns since the force from the CO2 or compressed air is rather small in comparison to that of the gun powder blast from a Real Guns or even a Blank Gun, the recoil is very slight. Blank Guns have similar gun powder charges to a Real Gun and so the recoil is more noticeable but unlike a Real Gun, a Blank Gun does not really push against a sizable object like a bullet, a Blank Gun only pushes against the air in front of the barrel which has very limited resistance and so there will be much less felt recoil from a Blank Gun than the recoil from a Real Gun pushing on a heavy grain bullet.

With semi auto Guns like Blowback Pellet and BB Guns and semi auto Blank Guns, there is also the momentum and mass of the slide to consider as it moves backwards and forwards which also gives the effect of recoil and in the case of an Airgun accounts for most of the recoil felt by the shooter.

Watch my Vimeo video on this subject where I go into much more detail and explain the effect of recoil when shooting Airguns and Blank Guns:

A very common occurrence with CO2 Airguns and Airsoft guns are leaky CO2 seals. Usually this occurs right where the CO2 cartridge connects to the main valve area. This can be either in the gun or in the magazine depending on the setup of the airgun.

There are many reasons why this can happen, but the most common reasons are a worn-out or dried up seals or even a seal that has been imprinted or misshapen from the constant pressure of the tip of the CO2 pressing against it.

When this happens you may encounter a leaking CO2, the severity of the leak can vary from mild slow leaks to leaks that can be so bad that the gun is unusable. Keep in mind there can be other problems not related to the CO2 seal such as in the valve area, the fix I show you in this YouTube video will not fix a leaking valve, you can try using something like Crosman Pellgun oil for a problem like that.

Watch my below Vimeo video where I show you how you can easily use some Plumbers Teflon Tape to improve the contact points between your CO2 and CO2 main seal and eliminate leaking CO2 in your Airgun.

A very common question I get asked is "How Long Can I Leave CO2 in My Airgun?" So what do I do when I get asked a question over and over again... Well I make a video and give you my answer to the question.

Some CO2 Related Questions I seem to get over and over again are:

1. Can I leave an unused CO2 in my Airgun and for how long is it safe?

2. Can I reuse a C2 once it is empty?

3. Can I use my gun without CO2?

In this YouTube video I address questions 1 and 2, I kind of forgot about question number 3 since it is not as often but it does come up from time to time believe it or not and the answer to being able to use a CO2 airgunwith out CO2 is "NO", It's kind of like trying to drive a car without gas, or turn on a light without electricity or stay alive without food...

So anyways, watch my below Vimeo video for answers to questions one and two:

This may be a bit controversial for some people who don't like the thought of using an gun for hunting or extermination of unwanted pests. But weather or not it is accepted by all, it is a practice that many people still embrace including myself when done in a humane way.

Let's start off by addressing this topic by asking some questions and filling in some of the answers. Keep in mind I go into much more detail in my Vimeo video below.

What is the reason that you need to Shoot or Hunt an Animal?

Are you shooting an animal out of need or just for fun, sure there is a thrill in the sport of hunting but after taking down your prey, the animal should not be killed in vain as the meat should be eaten. There are also times when pesky critters get into your gardens, tree farms, feeding stations garbages and who knows what else? I personally think shooting an animal that has not done you any harm or that you don't plan on eating is not ethical. So question your motives wisely?

Can you use an Airgun for Hunting and or Pest Control?

The short answer is yes! As long as you choose the correct Airgun for the job, one that has enough power and accuracy to get the job done in a humane manner. Using an underpowered or inaccurate gun of any type for the chosen target will lead to the animal being wounded and possibly getting away to suffer unnecessarily.

What about Pistols versus Rifles?

Given the choice, a rifle will always be your best bet, rifles tend to be more accurate since they are more stable to hold and the fact that the sights are further apart which improves the guns accuracy. Most rifles also allow for enhanced sighting systems like red dots or magnified scopes for even further accuracy improvements. There are some pistols made specifically for hunting and target shooting that can be accurate but I would limit their use to shorter ranges.

What about Pellet guns versus BB guns?

BB guns in general are not meant for hunting or pest control, and in most cases they are underpowered and not as accurate as their pellet shooting counterparts, especially out at longer ranges where most pests keep their distances to. If you plan on doing some hunting and or pest control, please invest in an adequate pellet rifle to get the job done humanly.

What type of Ammo is best for Hunting and Pest Control?

There are lots of types of pellets available, pointed, rounded, flat, hollow-point and even pellets that have nylon tips. At the end of the day, use the pellet that is the most accurate in your Airgun because shot placement will win over pellet shape any day of the week. The reality is that as long as that pellet hits the target with adequate velocity, it doesn't matter what shape it is, it's more than likely going to pass right through the animal.

What is the lowest FPS that I can use?

I would rather ask the question, what is the highest fps I can get away with since more fps will give you more margin for error, since it will have a flatter trajectory and will do more damage even if your shot is off a bit. An experienced shooter could make a kill shot on a small pest even with a 400 fps airgun but the shot would have to be perfect and the range would have to be close. Of course when shooting larger game, you will need larger caliber pellets with higher velocities. Also when using a high velocity airgun you need to consider what is beyond your target, if you miss, where is that pellet or bullet going to end up? You need to make sure you do not injure anyone by mistake as pellets/bullets can travel a long distance.

How large of an Animal can an Airguns Kill?

This is really dependent on the Airgun being used, Airguns come in many different calibers, from .177 right up to .50 caliber, some PCP Airguns can even take down a deer! You need to do your research and make sure the Airgun you choose has both the power and accuracy you need for the intend prey.

Where can I use an Airgun for Hunting and or Pest Control?

This is a question you need to ask your local authorities as laws and hunting regulations are different just about everywhere. Even shooting pests on your property may require a permit so be careful to obey your local laws.

In this Comparison video I go through the benefits and shortcomings of both Blowback and Non-Blowback Airguns. I focus mainly on Airguns but there is a definite crossover with Airsoft guns.

Here are some basic statements that best describe both Blowback and Non-Blowback Airguns.

Blowback Airguns:

• Blowback Airguns usually have a movable slide that moves back and forth with each shot.

• Sometimes the blowback operation is internal (Internal bolt) so there may not be an external moveable slide.

• Some CO2 is used to move the slide rearwards in a Blowback Airgun.

• The Blowback motion of the slide with some blowback airguns can also cock the hammer or internal striker allowing for true single action trigger pull. But not always!

• Some Blowback airguns have the potential for full auto capabilities since they can have a true semi auto action.

• There is some noticeable recoil from the Blowback action simulating the recoil of a real gun.

Non-Blowback Airguns:

• Non-Blowback Airguns can have fixed or movable slides but they will not cycle back and forth with each shot.

• Non-Blowback Airguns tend to have less working parts since no Blowback valves are required or even a moveable slide.

• There are some Blowback and Non-Blowback Airguns that field strip similarly to their real steel counterparts but this is most commonly found in Blowback Airguns.

• Non-Blowback Airguns require the shooter to cock the hammer for single action shooting or use a double action trigger pull for semi auto like performance.

Pros:

Blowback Airguns:

• Blowback Action causes a noticeable recoil which makes the airgun feel more realistic.

• Blowback Airguns in some cases have true semi auto action with true single action triggers which mimic the authenticity of the real steel versions of the guns they replicate much better making them better training tools.

• Having some recoil makes blowback Airguns potentially better training tools.

• Blowback Airguns look really cool when shooting them  and are great action prop guns.

Non-Blowback Airguns:

• Non-Blowback Airguns tend to have less working parts so less to go wrong and more reliability.

• Non-Blowback Airguns can be more accurate since the recoil from the blowback is not a factor.

• Non-Blowback Airguns have more potential power and more shots per CO2 since no CO2 is robbed for the blowback operation.

Cons:

Blowback Airguns:

• Blowback operation can rob some of the power and will also rob how many shots you get from the Airgun.

• Blowback Airguns are effected even more by cold weather and the cool down effect.

• The recoil from Blowback Airguns can effect accuracy for some shooters.

Non-Blowback Airguns:

• Non-Blowback airguns are generally double action when shooting semi auto and so the trigger pull will be longer and heavier.

• Non-Blowback Airguns do not replicate the recoil action of a real gun.

• Non-Blowback Airguns do not look as cool to shoot and are not as good of an action prop gun.

In many of my reviews I show the loading process of each gun but sometimes I either skim over this part or assume most people already know how to load an Air Pistol and skip it entirely. Well as it turns out not everybody does know how to load up an Airgun or they are unclear on certain areas, like do you actually need the CO2 and how long can you leave CO2 in an airgun?

So I made a video specifically to cover how to load CO2, BB's and/or Pellets into your Air Pistol.

Now even though this video is targeted at 4.5mm Steel BB and Lead Pellet Pistols, there is a crossover with 6mm Airsoft Pistols so this video may also help an Airsoft shooter.

Our Family Bearded Dragon (Dijon) was looking rather sad and lonely today so I figured he could hang out while I made the video, he really doesn't do much of anything most of the time so why not give him a special appearance in one of the Replica Airguns Videos ;)

Two questions that come up over and over again and to be honest I just hate answering, mainly because both of these questions to me are kind of common sense questions. I feel if someone where to stop and actually think about teh question, the answers would become obvious.

That said, common sense has to be learned somewhere and not all of us are exposed to the same life experiences so here goes...

The two questions are:

• Will this Ammunition Work in my Gun?

• Can I Convert a Blank Gun to a Real Gun?

The answer for both of these question is actually the same! Use the ammo made for your gun and do not try to use anything other than the ammo that was made for your gun. Do not try to modify your gun to shoot anything other than the ammo that was made for it, if you do, you may be breaking the law and could land yourself in jail. If you can follow these rules then your ammo and gun will work as intended :)

So that's pretty much it in a nutshell, watch my YouTube video below as I show you examples of ammo types with visuals on exactly why you need to use the ammo made for your gun. I also talk about the dangers of attempting to modify a blank gun to shoot some sort of real bullet and why it is a very bad idea in so many ways to try and convert a blank gun into a real gun.

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the US Store

This video should go "Hand in Hand" (pun intended) with my Best Two Handed Pistol Grip Tutorial Video that I did last year back in August. After that video I had several people ask me to talk about how to aim a gun. I guess if you have been shooting guns for a while you kind of take it all for granted but after teaching my kids the proper way to aim a gun at a target, this info is not naturally born into us ;)

This video demonstrate how and where to place your open gun sights on a target and also how you can compensate for a gun that may not be perfectly sighted in.

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Carbine GBB.

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

I could pretty much copy and paste my review of my G&G CM16 Raider GBB since both of these guns are pretty much the same Airsoft Rifle with different finishings. Instead I will place a link to my G&G CM16 RaiderVersion 2 GBB AR Airsoft Rifle Review and insert some nice photos of the  G&G CM16 Carbine version for you to admire :)

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada - Buy G&G Airsoft Rifles in the US

This is take 2 of my Modification to my F1 Chrony Chronograph. The purpose of this modification is to improve the low light FPS readings. In my first attempt I used LED Puck Lights but they where the kind that used flat panel LED's and they only had 4 panels per LED Puck which made each LED panel kind of bright. I did get OK with my first mod using LED Puck Lights but not as good as I would like to see.

So here we are with take 2 of F1 Chrony Chronograph LED Puck Light modification and this time around I am using standard bulb styled LED lights and to improve my chances of this working I went with and LED Puck that contained 24 LED bulb lights per puck, this way each light on it's own is a bit dimmer which I feel will give a more diffused lighting effect and hopeful consistent fps readings.

By the way I got these LED Puck Lights at my local dollar store for $2.50 each so not a very expensive modification, especially if they work.

Well... Watch the video and see how they perform...

This video was made to show you the results I got by mounting LED puck lights to the top of my F1 Chrony Chronograph defuser panel in order to improve the low light Feet Per Second readings when using 4.5mm Steel BB's.

I have been struggling with my F1 Chrony Chronograph during the fall and winter months as tit becomes overcast and dark where I live. There have been days where I have gone out to shoot my field test shooting video and not been able to get any Chronograph fps results which is very frustrating because much time and effort goes into the planning setup of each video.

I was given advice from several of my viewers to mount an LED puck style light on the back side of my Chronograph defuser panel and that this helps the Chronograph to read much better in low light situations.

I bought a multipack of the LED puck lights from my local Costco but they did not work as well as I expected them to as they had a panel style of LED rather than the bulb shaped LED which I think may diffuse the light a bit more. My next experiments will be done using LED Puck lights but with the bulb styled LED.

You can watch my video to see how my first attempt using an LED Puck light with my F1 Chrony Chronograph worked out.

I stopped by the ICS Booth, we don't sell too much of their products but have carried a few items from time to time. ICS caries some nice quality Airsoft guns including the M1 Grand with real wood stock, and some AK & AR variants.

One of our suppliers had the new FN Herstal Five-seveN Blowback Airsoft pistol, I believe made by Marushin. Like the real FN Herstal Five-seveN, the pistol is pretty much all polymer including the slide and frame. This pistol also uses CO2 in the full size drop out magazine which should make it fairly powerful.

Looks like there is another Dan Wesson contender available now in the form of a Swiss Arms S&W 357 Magnum 4 inch and 6 inch barreled version, they look really nice and like the Dan Wesson have the realistic reusable brass shells that hold the 4.5mm Steel BB's.

Ever considered owning a  mobile Gunsmith vehicle, look no further, I came across this pimped out Firearms Van complete with machine guns mounted in the front :) Inside was a complete firearms workshop.

Last but not least, we had some fun while in Vegas. I go down for the SHOT Show for business but I also bring my wife and we make time for some non business related activities. I generally stay at the WorldMark resort each time and this year the weather was pretty nice so we where able to get some sun by the pool a couple of days and I even got a tan line! Of course the food and entertainment is always awesome in Vegas.

We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.

One company I took notice of was Inokatsu, they make super high quality Airsoft guns. I was drawn to their Sig Sauer P229 and 1911 pistols that by the way are made out of real steel and as close to the real version as possible without it being a real gun. The Inokatsu pistols I looked at are not cheap and will set you back over a grand but are as close as you can get to a real sidearm as possible in an Airsoft version. They feel amazing to shoot with heavy blowback and that sound real steel makes when the slide snaps back.

Let me know if you're like me and would be willing to part with a substantial amount of money for one of these treasures? 

So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.

Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!

2013 BB Pistols

2013 Pellet Pistols

2013 Airsoft Pistols

2013 Blank Pistols

2013 Rifles

Type: GBB Airsoft Machine Pistol (Used).

Manufacturer: KSC

Model: Cobra M11A1

Materials: Plastic and metal.

Weight: 2.9 pounds (1315 grams).

Barrel: Metal non-rifled.

Propulsion: GBB.

Action: Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 40 rounds.

FPS: 300+ fps.

Trigger Pull: The trigger pull on the KSC M11A1 GBB Airsoft Machine Pistol is pretty much exactly what you would expect from this fast firing single action only semi and full auto machine pistol, it has a really short take-up and then a nice crisp light trigger pull. Since it is an open bolt system, you will need to pull back the bolt for the first shot, releasing the trigger releases the bolt, just like with a real M11A1.

Accuracy: At this point because I received this gun from another collector in used condition, it is not working 100%, the hop-up bucking was damaged and the new ones I ordered are not the correct versions for this Airsoft gun. It does shoot but it is temperamental, sometimes the bolt will not cycle all the way and I have no idea how this is effecting the fps and accuracy. It would not be fair to test it in this condition, hopefully I can find the right hop-up bucking for it and do the Field Test Shooting Review at some point.

Build Quality: MyKSC M11A1 GBB Airsoft Machine Pistol has been used a fair bit so it is somewhat battle scarred, still it looks pretty good and other than the Hop-up bucking problem I am having it should be in working condition, unfortunately without the correct hop-up bucking, this gun will not work properly. Hopefully I can find a hop-up bucking? Even though much of this machine pistol is plastic externally, it has held up very well, the metal parts do also help to balance it off and give it a decent overall 3 pound weight which feels good considering it is such a small gun. 

Realism: The KSC M11A1 GBB Airsoft Machine Pistol is a very close copy of the real steel Cobra M11A1 Machine Pistol, all the parts appear to function just like the original Cobra RPB Industries M11A1 and it even field strips in the same manor. The full licensing and trademarks also help to make this replica very believable.

Reviewed by:ReplicaAirguns.com

Pros:

• Very realistic and accurate replica with full Cobra RPB Industries licensing.

• Even though there is lots of external polymer, it still has good weight to it.

• Full metal 40 round drop out magazine, holds BB's and Gas.

• Everything works like the original, field strips and lots of mechanical parts. 

• Shoots in both semi and full auto.

Cons:

• Hard to get here in Canada and hard to get parts here in Canada.

• Mostly plastic main build - Limited usage of metal and steel.

• Have no idea how it will perform because it is not functioning at 100%.

Comments:

Well I've pretty much said everything I can say without actually shooting it? Even though my used KSC M11A1 GBB Airsoft Machine Pistol is not in 100% working condition, I still like having it as I like the replica aspects of owning it, how else would I get my hands on a .380 caliber full auto machine pistol here in Canada ;) And you never know, I may just luck out and find the proper hop-up bucking for it and then have the chance to do my Field Test Shooting Review for you all :)

My Vimeo Table Top  Review of the KSC M11A1 GBB Airsoft Machine Pistol:

Buy BB Mini UZI in Canada

Buy BB Mini UZI in the US

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Raider GBB

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

Trigger Pull: The trigger pull on the G&G AR styled Airsoft CM16 Raider is very smooth, the CM16 Raider uses a mechanical trigger that once the charging handle has been pulled back or "charged", works in a single action only manor with a slight bit of take-up and then a light predictable release. Each time the closed bolt gas blowback system shoots a round in semi or full auto, the internal action is ready for the next single action shot.

Accuracy: So far I have not tested Version 2 of the G&G CM16 Raider, but I have tested Version 1 so here are the result I got with Version 1 until I do my official Field Shooting Test with Version 2. When shooting from a 30 foot distance I did get some nice closely grouped shots from the G&G CM16 Raider Gas Blowback but when shooting in full auto it did spread apart somewhat, maybe from the GBB recoil? Version1 of the G&G CM16 Raider GBB shot an average of just over the 325 fps, I was using .25 gram BB's and it was a cool day so you can expect higher fps out of the G&G CM16 Raider when conditions are better.

Build Quality: The G&G CM16 Raider GBB being built on G&G Combat Machine Platform is targeted more for the price conscience person. The quality is consistent and good and I did not mind having more plastic in the G&G CM16 Raider GBB as my plan from the beginning was to add a lot of extra accessories and starting out with a somewhat lighter footprint made the gun still relatively usable even when all geared up with extra accessories. I also feel the plastic or polymer fiber upper and lower receiver and RIS rail system will also wear better than steel as it is more likely to flex rather than break in many situations, not to mention metal will show scratches and wear more over time.

Realism: Airsoft AR rifles in my opinion are very realistic in general, even the AEG versions work just like the real steel AR's with working charging handles, dust covers, bolts, magazine, adjustable stocks and sights, but I would have to give the advantage to the gas Blowback systems like the G&G CM16 Raider GBB as it has a full internal bolt with some decent recoil, it can also be field striped very similarly to a real AR15 rifle. The shot count is more like what you would find in an M16 or AR rifle which means you will need to consider ammo shot assuage and reloading more carefully when using it in an Airsoft game.

Purchased From: The Replica Airguns Store.

Pros:

• Super affordable Gas Blowback Airsoft AR M16 styled Rifle.

• Very high rate of fire in full auto.

• Polymer shell is both light and very durable, does not show scratches or wear as easily as metal.

• All most every part is operational - Fully Ambidextrous now.

• Can be fully customized, lots of mounting points on the RIS Rail system.

• Fully adjustable Crane Stock.

• Removable rear Iron Sight can be swapped out for other sighting systems and hardware.

• Version 2 is a significant upgrade from Version 1.

• Internals can be swapped over to make it an AEG gun.

Cons:

• Some people may not like the polymer RIS rails and upper and lower receiver?

• Would have liked to have seen some sort of a plate over the pistol grip to finish it off.

Comments:

I already really liked Version 1 of the G&G CM16 Raider GBB Airsoft AR Rifle and even bought a bunch of magazines and gear to sport mine up for use in some local Airsoft games, the upgrades and improvements found in Version 2 are the icing on the cake! I am hoping the internal performance enhancements will increase the FPS just a bit and Gas efficiency somewhat over Version 2 but will find out when I give it a thorough testing shortly. If you have been a bit scared off by the higher prices of some GBB Gas Blowback Airsoft rifles then perhaps take a look at the G&G Combat Machine Platform CM16 Raider in GBB, it may just change your mind about Gas Blowback Airsoft rifles!

My Vimeo Video Review for the G&G CM16 Raider Airsoft GBB AR Styled Airsoft Rifles:

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada 

Buy G&G Airsoft Rifles in the US

Every so often I come across some interesting guns that people are willing to trade or sell me, if the price is right or the trade involves a gun I can part with, then I go for it and hopefully end up with something I may not be able to get new or that for me is hard to acquire in Canada.

My most recent trade added two new guns to the collection, a KSC M11A1 Airsoft Machine Pistol and a Daisy Power Line 2003 .177 Caliber Pellet Pistol.

Both of these guns are very hard to get since the KWC Airsoft M11A1 shoots a  bit too week for import into Canada, and the Daisy 2003 is no longer in production.

The KSC M11A1 is a 6mm Airsoft pistol that shoots in both semi and full auto using a Gas Blowback open bolt system, it is a replica of the .380 Caliber Cobra RPB Industries M11-A1. Mine came with a mock suppressor and 7 magazines, although not all of them are in working condition. The KSC M11A1 is in working condition but needs a new Hop-up Rubber Bucking which I have on order.

The Daisy Power Line 2003 seems to be in really good condition but still needs to be tested, it is one of the only true blowback semi auto pellet pistols I know of, what I mean by this, is it has a true blowback system with a true single action trigger which means it can be converted to full auto which is one of the reason Daisy may have discontinued it. The Daisy Power Line 2003 uses a very interesting 35 round rotational magazine. Some say it is loosely styled after a Browning High Power pistol.

Stay posted for reviews on both of these pistols down the road.

Buy BB Mini UZI in Canada   -   Buy BB Mini UZI in the US

Buy Airsoft Mini UZI in Canada   -   Buy Airsoft Pistols in the US

You may wonder why I am doing another video on the G&G CM16 Raider Gas Blowback Airsoft AR Rifle? That's because the one I have here in this Update Video is Version 2 and yes there is a difference. So far I can only tell you about the obvious stuff since I really have not tested it out to see if there are any other performance gains with Version 2 over Version 1.

G&G has made some improvement with Version 2 enhancing several areas:

• First off, there is now a selector switch on both sides of the receiver allowing for left or right handed use.

• Carrying on with the ambidextrous theme, G&G also added a magazine release to the left side of the receiver.

• Another missing feature was a bolt lock out when your magazine was empty, this has been added and so the bolt will lock back about 1/3 the way back locking out the gun and letting you know when you are out of ammo.

• The bolt release on Version 1 was just for show and did not function. On Version 2, with the bolt lock, G&G also added a working bolt release.

Those are some pretty significant improvements to the G&G Armament CM16 Raider GBB Version 2 in my books! So now it's time to test it out and see if full auto mode has been improved. I found with Version 1, that when using full auto, the G&G CM16 Raider GBB would have some trouble getting through a full mag dump but when shooting very quickly in semi auto had no problems at all.

Make sure to check back for my full review and shooting field test for the G&G CM16 Raider GBB Version 2 AR Airsoft Rifle.

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada - Buy G&G Airsoft Rifles in the US

We just received an order of KWC products so if you've been waiting for some out of stock items then go take a look! By the way, the KWC Beretta / Taurus full metal blowback BB and Airsoft versions now come semi and full auto enabled!

Canada Replica Airguns Store  -  US Replica Airguns Store