When I say Airguns, I am referring to pretty much all BB, Airsoft, Pellet, Paintball and even Blank guns for most of the topics listed here.

Do’s:

1. Treat your Airgun just like you would a real gun. If something goes wrong, perhaps the outcome will not be as severe but do you really want to take a trip down to your local emergency ward to get a BB or Pellet removed?

2. Always assume your airgun is loaded, for some reason it always seems those empty guns are the ones that do the most damage.

3. Be discrete, If it looks like a gun other people will think it is a gun so don’t flash your airguns around in public. Keep it in a case when transporting and shoot it in an area that will not alarm other people.

4. Always wear eye protection when shooting your Airgun. Do you really want to shoot your eye out? No Joke!

5. Be aware of your surroundings like windows, hard objects that could make your ammo bounce back at you. Make sure you are shooting your Airgun in a safe direction at all times, know your target and beyond.

6. Use Airguns to teach others and learn how to safely and effectively shoot a gun. Airguns can be less intimidating then a real gun (Not so loud and very little recoil) and make for great start out and transitions guns.

7. Use Airguns to get more inexpensive trigger time and become a more experienced shooter. Airguns cosy only pennies per round to shoot and can be shot in way more areas than a real gun can, practice makes perfect so get shooting!

8. Use Airguns in areas where real guns may not be allowed or safe to use. Again, Airguns can be shot in all kinds of places, in your back yard or even in a properly setup indoor home range.

9. Use Airguns with adequate power for safe and humane pest control where real guns may be prohibited.Airguns are quiet and less likely for the bullet to travel long ranges which makes them ideal for close range pest control in areas where real guns are too loud and to powerful.

Don’ts:

1. Do not assume because it is an airgun it is not dangerous or simply a toy. Many Deaths have been caused by Airguns along with a lot of pain and suffering so treat your Airgun with respect. It is not a toy or you would find them in the toy department at your local store along with yo-yos and stuffed animals.

2. Do not point or shoot at people unless of course you are using an Airsoft gun in an Airsoft field or facility. Yes Airsoft guns are meant to shoot at each other (with appropriate attire like eye protection and full body clothing), but steel BB and Pellet can cause serious injury especially at close range and on direct skin contact.

3. Do not leave your Airgun loaded, you never know who is going to come across it and accidentally discharge it. Remember, a loaded gun is a dangerous gun in the wrong hands. You may know better than to assume the gun is undulated but children and even adults without any gun training will most definitely handle the airgun without consideration of the danger it poses.

4. Do not use an Airgun for self protection. See my related video. Simply put, Airguns are not practical for self defense because they rarely have enough Stopping Power. The ones that do have enough power need to be pre-charged and in most cases are only single shot meaning if you miss or don’t get the job done no the first shot then you are done.

5. Do not use an underpowered Airgun for pest control. See related video. Using a low powered BB pistol for pest control is cruel, you will only injure the animal making it suffer unnecessarily. Use a high powered pellet rifle to get the job done.

6. Do not take your gun apart, in most cases this will void the warranty and the reality is that airguns rarely need to be cleaned since no dirty gun powder is used. lead pellet rifles may require occasional barrel cleaning to keep the rifled barrel free of debris.

7. Do not over oil your Airgun, a little goes a long way and too much oil will just attracted dirt, use the right airgun oil and just enough to keep part functioning smoothly.

8. Do not over pump an Airgun. Over pumping an Airgun can cause damage to valves and seals and in a worse case situation a rupture the air pressure reservoir or even cause the airgun to explode!

Can I use Airsoft BB's in my BB Pistol? I would have to say this is by far the number one question I get asked in the comments section of my Vimeo videos. I have made several videos where this question gets addressed within the video but so far to date I have not made a stand alone video just covering Airsoft BB use in BB Guns.

So here it is, and now I have a video I can link to this so very common question, if you where wondering about this yourself than please watch my YouTube Video on this topic as it goes into a fair amount of detail about it.

The short answer to this question is no, you can not use 6mm Airsoft BB's in a 4.5mm Steel BB Pistol or Rifle. For the simple reason that 6mm is larger than 4.5mm and so the physical diameter of a6mm Plastic Airsoft BB is just to large to fit inside of a 4.5mm Steel BB magazine or barrel.

People have commented about using a 4.5mm plastic Airsoft BB in a 4.5mm BB gun and yes this could in theory be an option but I discuss why I feel this is not a good idea based on size and mass.

I'm getting close to uploading 600 videos now over on the Replica Airguns Vimeo channel, so there are bound to be a lot of similar questions and popular discussions. In this Replica Airguns Vimeo Video I address what I feel are my Top 10 Most Common Airgun Questions and Discussions.

1. Can I shoot my CO2 gun without CO2? (1:00)

2. Can I refill CO2 Cartridges? (2:08)

3. Will XYZ BB gun kill a bird, rat, rabbit, gopher…? (3:33)

4. Can I shoot Airsoft BB’s in my BB gun? (5:58)

5. Can I use my Airgun for self defense? (7:47)

6. Do Airguns & blank guns have recoil? (10:42)

7. Why play around with Airguns, just buy a real gun?(12:50)

8. Can I have a free gun? (17:15)

9. Which gun should I get? (19:10)

10. Mike, can you do a review of such and such a gun? (20:05)

Type: Blowback Airsoft Pistol.

Manufacturer: Socom Gear.

Model:MEU SOC 1911.

Materials: Almost all metal.

Weight: 2.3 pounds (1020 grams)

Barrel: Metal non-rifled.

Propulsion: Gas (Propane, Green Gas)

Action: Semi auto blowback, single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 15 round full size metal magazine.

FPS: 300+

Trigger Pull: The trigger pull on the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is I would have to say one of the nicest 1911 single action triggers I have tested so far. The take-up is very slight with an extremely light trigger pull required to release the hammer. Any lighter and I would say it would be too light and perhaps prone to accidental firing.The three hole tactical trigger extends out a little further than some 1911's but feels secure on the finger.

Accuracy: At this point I have not shot the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol but have high expectations based on the overall quality of this pistol and form other reviews I have read on this Airsoft 1911 replica. According to the manufacturers claimed fps, we should get somewhere right around 300 fps. The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol has an adjustable rear sight for windage and we can take care of elevation using the adjustable hop-up so zoning in the Socom Gear US Marine MEU SOC 1911 to shoot dead center on target should not be too difficult.

Build Quality: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is one of those Airguns that really catches your eye, and once you pick it up and hold it in your hands you discover that not only does it look really great but it also feels really great in your hands! The tolerances of the parts are excellent, everything mechanical is smooth without any friction and you can even see the texture of the metal grain through the quality matt black powder finish.

Realism: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is a a fantastic replica of a real steel MEU SOC 1911 used by the US Marine Corps' Marine Expeditionary Unit (MEU). The balance and weight really make this 1911 Airsoft pistol feel like your holding the real deal, all the mechanic parts function as they would compared to the original and the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is fully field stripable.

Available From: The Replica Airguns Store.

Pros:

• Heavy full blowback action.

• White dot sights (Adjustable for windage).

• Super light single action trigger.

• Ambidextrous safety and working grip safety.

• Full size metal dropout magazine.

• Excellent quality, durable black powder coat matte finish .

• Enhanced Pro-Grip with brass marine inserts

• MEU SOC 1911 Licensed.

• Three hole tactical trigger with skeleton hammer.

• Comes in a hard shell case with Gemtech Outback II 5-inch silencer and lanyard.

• Rail for adding accessories. 

Cons:

• FPS is kind of low for Canada Market so not one we can regularly get in stock.

• A bit on the pricy side.

• No option of CO2 magazine.

Comments:

With all the BB and Airsoft 1911's out there what makes the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol stand out from the rest. First off it feel the most believabel when holding it in your hand, it seems ot have that perfect weight and balance that is often hard to replicate in an Airgun. With features like enhanced Pro-Grips with brass marine inserts, MEU SOC 1911 licensing, three hole tactical trigger, ambidextrous safety, super smooth and light single action trigger, White dot adjustable sights and the included hard shell case with lanyard and Gemtech silencer you can not go wrong with the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol.

My Vimeo Video Review for the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol:

Buy the Socom Gear US Marine MEU SOC 1911 in Canada

This is my Official Field Test Shooting Review video for the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol. You can also checkout my Table Top Review where I go into more of the specifications and features of this fine KJWorks pistol and show you around the Sig Sauer P226 Airsoft gun and even do a Field Strip of it.

In this Field Test Shooting video I test out the performance of the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol using my Chronograph to get a real world (FPS) Feet Per Second rating. I also position myself 30 feet back and shoot 10 rounds at a paper target using a semi-rested shooting position (Sand bag up front and standing in the back).

In terms of velocity the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol shot a bit on the fast side at 414 FPS when averaging a 5 shot strong using .20 gram BB's with a brand new CO2. Keep in mind I was using the CO2 magazine which will have more power than the Gas Magazine version. I would assume the Gas mag version would shoot right around the mid 300's which may be more suited for indoor Airsoft games. For outside Airsoft wars you may want the extra power of the CO2 mag for shooting at targets further distances out.

Stepping back 30 feet and shooting at my paper target, the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol produced a decent 2 inch 10 shot grouping that was just a hair low but well centered left and right. The low factor could be adjusted up using some Hop-up tweaking. The trigger in single action mode is light and the release is crisp. Even the double action trigger is fairly light for double action, but there is a lot more take up since your finger is doing all the work that the blowback action would normally do for you when shooting in single action.

With the heavy blowback and high FPS the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol creates a really great shooting experience. It would be great for some target practice, getting some additional trigger time in if you are a Sig Sauer P226 owner and would make an excellent outdoor Airsfot war backup weapon. The quality is excellent and as a lover of the Sig Sauer lineup of guns I highly recommend this Airsoft pistol from KJWorks.

Buy the KJWorks KP01-E2 Sig Sauer P226 CO2 Blowback Airsoft Pistol in Canada

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer: KJWorks

Model:KP01-E2 Sig Sauer P226

Materials: Metal slide & frame.

Weight: 2 pounds (920 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 Gram CO2.

Action: Single and double action.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 26 rounds.

FPS: 350-400 fps

Trigger Pull: The trigger pull on the KJWorks KP01-E2 Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the KJWorks P226 in single action mode, the pull is light and the take-up is nice and short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action follow-up shot, double action shots are still pretty light but much longer in order to cock the hammer back.

Accuracy: (I have not shot the KJWorks distributed CO2 Mag version but I have already done a Field Test Shootinng Review for the same KJWORKS gun distributed and licensed by Cybergun in the Gas Mag version. Here is what I had to say about the Cybergun Gas Magazine version: "Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor."

Build Quality: The build quality for all KJWorks guns in my opinion is one of the best in the business. Fit and finish is top notch with close tolerances in the working parts as you would find in a real steel gun. The paint is excellent and in general will wear much better than other Airsoft guns out there. The KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol is pretty much all metal and feels it, the recoil spring is nice and firm and all working parts are smooth and crisp when operated.

Realism: The KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol is a replica of the real steel Sig Sauer P226 with the exception of the licensing. The KJWorks KP01-E2 really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig Sauer and all the mechanical parts work just the same including a working de-cocker and adjustable front sight. It is really hard to distinguish the Airsoft version from the real Sig P226 in both looks and feel.

Available in the:Replica Airguns Store

Pros:

• All metal pistol with good overall realistic weight to it.

• Very crisp and firm full blowback operation.

• Some of the best fit and finish in the industry. Especially in price range.

• Nice accurate looking and working Sig Sauer P226 Replica.

• Working de-cocker.

• White dot sights for quick target acquisition.

• Front sight is adjustable for windage.

• Full size drop out magazine holds Airsoft BB's and CO2.

• Fully field strip-able.

Cons:

• No actual Sig Sauer Licensing but very clean look.

• CO2 Mag does stick out a bit and add to size

Comments:

I am a huge Sig Sauer fan so I have kind of high expectations with a replica gun! The KJWorks lineup as a whole is really fantastic, and what I say about the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol can be said about the entire lineup. KJWorks makes a super well built product that replicates the real steal version almost exactly other then they shoot Airsoft BB's instead of actual bullets. When holding a KJWorks gun in the hand you can feel the quality, in weight, ballence and especially when operating the slide, trigger and other working parts. Everything just feels so perfect and responsive. For the money you can not go wrong with the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol or any other KJWorks gun for that matter.

My Vimeo Table Top  Review of the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol:

Buy the KJWorks KP01-E2 Sig Sauer P226 CO2 Blowback Airsoft Pistol in Canada

This First Person Shooting Clay Pigeons Video with my KJWorks M9A1 and 1911 Airsoft Pistol is to serve two purposes: Number one and really the only reason needed to make a video like this... To get outside on a nice warm summer day and practice some tactile shooting all while recording it in first person so you can come along and enjoy it with me :)

Secondly I wanted to inform everyone that the video uploads will be a bit lighter for the next week or so since I am on what I call a working holiday. I am focusing on a Fitness Contest this weekend along with a Fitness Expo the following weekend, nothing to do with Replica Airguns but it does coincide with my other Website and YouTube channelGetFitOver40.com. The Fitness contest is the Victoria Cup where I will be competing in the Men's Physique (Masters - Over 40) and (Open - All Ages) divisions. The Fitness Expo is called "theFitExpo" and it is in Anaheim California.

So if you want to watch more of my videos then you will have to checkout my other fitness channel for the next week where I will be posting lots of related content on what's going on fitness wise in my life right now.

Buy the KJWorks M9A1 Full Metal Airsoft Pistol in Canada

Buy the KJWorks Full Metal CO2 1911 in Canada

Type: Blowback Airsoft Pistols.
Manufacturer: KJWORKS.
Model: M9 & M9A1
Materials: Metal slide & frame.
Weight: 2.1 pounds (950 grams).
Barrel: Metal non-rifled smooth bore.
Propulsion: 12 gram CO2.
Action: Blowback, Single and double action.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 24 rounds.
FPS: 360+ fps.

Trigger Pull: The trigger pull on the KJWorks Beretta M9 & M9A1 is very good in both single and double action. Double action is a bit longer and heavier than when shooting in single action but not heavy by any means. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.

Accuracy: I have not done my actual Field Test Shooting video review for the KJWorks M9 and M9A1 Airsoft pistols but I did get the chance to make a short preview video where I shot both guns at some clay pigeons setup around 20 feet away. I was able to pop the center out of the clay pigeons no problem and found that even without any practice I was consistently hitting dead center on most shots. I am not sure exactly what the FPS will be but considering both theses versions of the KJWorks M9 & M9A1 have the CO2 mags they should shoot up into the 360+ fps range using .20 gram Airsoft BB's. Blowback operation is strong and the slides cycle full length. Keep posted for my upcoming Field Test Shooting Video for both pistols.

Build Quality: As expected, the KJWorks M9 & M9A1 build quality is just like all the other KJWorks Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to my my 4.5mm steel BB shooters. When using these guns regularly, areas that are painted like the metal friction areas show very light wear which is rarely the case with metal built blowback Airguns. Again the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWorks.

Realism: Both the KJWorks M9 & M9A1 are copies of the real steel popular Beretta M9 & M9A1, it is really hard to tell them apart from the real versions. Both the M9 and M9A1 are very similar in design with the M9A1 having some slight cosmetic differences, the biggest being the addition of a tactical rail built into the frame. Both KJWorks Beretta's can be field stripped in the same manor as a real Beretta M9 Semi Auto pistol and all parts function the same.

Available in the: Replica Airguns Store

Pros: 

• Pretty much all metal pistols with good weight to them.
• Full heavy blowback operation.
• Excellent fit and finish as always with KJWorks pistols.
• High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
• Seem to be very accuracy and well centered on target.
• White dot sights make it easy to shoot an most backgrounds.
• Ambidextrous safeties.
• Field strip-able like the real steel versions.

Cons:

• Sight are non-adjustable but elevation can be adjusted using the hop-up.
• Grips may be a bit wide for some small handed people.
• CO2 magazines sticks out a bit when using the CO2 mags.

Comments:
The KJWorks Full Metal M9 & M9A1 are yet more examples of excellent full blowback Airsoft pistols from KJWorks. They are built to very high standards, are near perfect replicas of the real steel Beretta M9 & M9A1 and performance is also excellent. Yes the price is slightly higher than a similar Airsoft gun from KWC but the quality on the KJWorks is definitely worth the extra cost. Make sure to drop by our Replica Airguns Canada Store and checkout our new lower pricing on the KJWorks line of Airsoft guns.

My YouTube Table Top  Review of the KJWorks M9and M9A1 Full Metal Blowback Airsoft Pistol:

Buy the KJWorks M9A1 Full Metal Airsoft Pistol in Canada

Buy the KJWorks M9 Full Metal Airsoft Pistol in Canada

Type: Blowback Airsoft Pistol.

Manufacturer:KJWORKS.

Model:1911

Materials: Metal slide & frame.

Weight: 2.2 pounds (980 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 28 rounds.

FPS: 360+ fps.

Trigger Pull: The trigger pull on the KJWorks 1911 is very good since it is modeled after a real steel 1911 which makes it short and crisp with a very light trigger pull. There is a very slight take-up at the very beginning of the pull but once your get past this the release is crisp and perceptible. Since it is not a double action trigger you will need to either rack the slide for your first shot or pull the hammer back if you have already chambered a round.

Accuracy: I have not done my actual Field Test Shooting video review for the KJWorks 1911 Airsoft Pistol but I did get the chance to make a short preview video where I shot some clay pigeons setup around 20 feet away. The KJWorks Full Metal CO2 Airsoft 1911 was a lot of fun to shoot at the clay pigeons and I had no trouble hitting them form that range over and over again. I am not sure exactly what the FPS will be but considering this version of the KJWorks 1911 has the CO2 mag it should shoot up into the 360+ fps range using .20 gram Airsoft BB's. Blowback operation is strong and the slide cycles full length. Keep posted for my upcoming Field Test Shooting Video for the KJWorks Full Metal 1911 CO2 Airsoft Pistol.

Build Quality: As expected, the KJWorks 1911 build quality is just like all the other KJWorks Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to any of my 4.5mm steel BB shooters or 6 mm Airsoft pistols. When using KJWorks guns regularly, areas that are painted like the metal friction areas and high spots show very light wear which is rarely the case with metal built blowback Airguns. Again the tolerances between the moving parts like the slide and frame are extremely tight showing excellent workmanship and machining from KJWorks.

Realism: The KJWorks CO2 Full Metal 1911 Blowback Airsoft Pistol copies the real steel very popular even today Colt 1911 A1, it is really hard to tell the KJWorks Airsoft 1911 apart from the real 45 caliber version. The KJWorks 1911 can be field stripped very similarly to a real 1911 Semi Auto pistol and all parts function virtually the same including a working safety, grip safety, slide catch-release, magazine release and hammer.

Available in the:Replica Airguns Store

Pros:

• Pretty much all metal pistol with good realistic weight to it.

• Full cycle heavy blowback operation.

• Excellent fit and finish as always with KJWorks pistols.

• High capacity 28 round full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)

• Seems to be accurate and well centered on target.

• Nice two tone finish.

• Working grip safety.

• Nice light true single action only trigger.

• Field strip-able.

Cons:

• Sights are non-adjustable but you can adjust elevation using the hop-up.

• Field strips a little different than a real 1911.

• CO2 magazine sticks out a bit but KJWorks makes Gas Mags also.

Comments:

I am a big fan of 1911 pistols and love getting my hands on pretty much any version weather it be a Real Steel 45 caliber 1911, a 4.5mm Steel BB version or 6mm Airsoft Pistol. As long as it has that true 1911 single action short light trigger to it. I love the way the slide cycles a bit slower than most semi auto pistols and this can be found in many Airgun and Airsoft version like this KJWorks 1911 making the shooting experience even more realistic. The fit, Finish and overall quality of the KJWorks 1911 over other brands is worth the slight additional costs so if you don't mind paying juts a tad bit more for that extra quality and you're looking for a CO2 1911 then you will not be disappointed with the KJWorks Full Metal CO2 Airsoft 1911.

My Vimeo Table Top  Review of the KJWorks M9and M9A1 Full Metal Blowback Airsoft Pistol:

Buy the KJWorks Full Metal CO2 1911 in Canada

We recently received some new pistols from KJWorks, The CO2 versions in Full Metal of the Colt 1911, the Berretta M9 and the Berretta M9A1. All of these guns are really well made, the fit and finish is excellent. Definitely a very high quality Airsoft pistol and worth spending a little bit more to get this extra quality. We have even lowered the price on many of our new KJWorks guns to make them even more affordable so check them out in our Canada Replica Airguns Store!

So I made a quick demo preview video where I get away from my table top and go outside to show them off a bit and shoot a few rounds through them at some clay pigeons. I did have some camera issues but you will get a good idea on how these guns look and perform.

KJWorks CO2 Airsoft Full Metal 1911

• Full Metal Design.

• 2.2 Pounds (980 grams).

• Adjustable Hop-up.

• 350-400 fps

• 28 Round CO2 Magazine

• Blowback SAO 

KJWorks CO2 Airsoft Full Metal M9

• Full Metal Design.

• 2.1 Pounds (950 grams).

• Adjustable Hop-up.

• 350-400 fps

• 24 Round CO2 Magazine

• Blowback SA & DA

KJWorks CO2 Airsoft Full Metal M9A1

• Full Metal Design.

• 2.1 Pounds (950 grams).

• Adjustable Hop-up.

• 350-400 fps

• 24 Round CO2 Magazine

• Blowback SA & DA

Here is my full Field Test Shooting Performance Video Review for the ANT (Advanced Novelty Tech) CO2 HPA Conversion Kit.

Make sure to watch my Table Top Preview for the ANT CO2 HPA Conversion Kit where I talk more about the features and benefits of a Bulk Air system like this and show you exactly what you get in the package.

My main goal in this Shooting Performance Test was to see how the ANT Advanced Novelty Tech CO2 HPAConversion Kit performed side by side with a standard 12 gram CO2. Keep in mind that you can also switch over at any time to a regular 12 gram CO2 even after installing the ANT adaptor system in the gun or magazine.

My choice of Airgun for this test was the KWC - Cybergun Mini UZIConverted to Full Auto. I chose this Blowback 4.5mm CO2 BB Gun because it uses a lot of CO2 with each shot and when shooting in full auto it literally eats CO2. I knew this airguns would really put the ANT Advanced Novelty Tech CO2 HPA Conversion Kit to the test.

My first performance test was to comparing both systems using a Chronograph so I could see how the fps velocity slowed down because of the CO2 cool down effect. The 12 gram CO2 did pretty well emptying a full 25 round magazine but keep in mind I was shooting in semi auto only for the sake of using a Chronograph. I did notice a drop in velocity from a high of over 300 fps to a low of around 260. When I switched over to the Bulk CO2 ANT System and performed the same test the fps started out a bit lower but stayed pretty much about the same with a few ups and downs. The initial lower fps may have been a result of using separate magazines for each test since the valves in each magazine are most likely tuned a bit differently to let out more or less CO2 with each shot.

My second and most impressive test was to empty a full 25 round magazine in full auto mode! Again a started out using the standard 12 gram CO2 and to make this a real world test, I did not replace the 12 gram CO2 form the previous test. I figured 50 shots was a realist amount of shots to get from a single 12 gram CO2 and after all I was only shooting in semi auto which uses a lot less CO2 then shooting in full auto.

My KWC Blowback Mini UZI rocked pretty good using the 12 gram CO2 until it hit about a third the way through the magazine and then it stated to slow down and pretty much stop dead in its tracks with about 5-6 rounds still left in the magazine. The CO2 was all gone and I was left a bit unsatisfied :(

Without any significant break time to let my KWC Mini UZI warm up again, I switched over to the ANT Advanced Novelty Tech CO2 HPA Conversion Kit magazine and unloaded the full magazine in no time with no cycle rate slow down at all, even after the magazine was deprived of Steel BB's I kept squeezing the trigger and letting the blowback hammer my shoulder for several more satisfying bursts. Now that is what you expect from a full auto Blowback BB Machine gun!

In conclusion, when shooting in semi auto you will see better fps consistency using the ANT Advanced Novelty Tech CO2 HPA Conversion Kit but where this system really shines at least for me is I can shoot as fast as as long as I want and it will feel same as the very first shoot I take even when using a full auto system. No more switching out 12 gram CO2 every few magazines, just speed load some more BB's in and your good to go.

I was sent a really cool new product form a company called ANT (Advanced Novelty Tech). Their CO2/HPA Converter allows you to hook up either a large CO2 tank or High Pressure Air system using standard Paintball hose system.

What's kind of neat with the Advanced Novelty Tech CO2 HPA Conversion Kit, is that you can still interchange your 12 gram CO2 if you want to even after modifying your gun to use Bulk CO2 or HPA!

The ANT Advanced Novelty Tech CO2 HPA Conversion Kit works with well over 100 BB, Pellet and Airsoft guns most of which would be Pistols but some rifles are included in this list.

The main advantages over using standard 12 gram CO2 cartridges would be a significant lower cost for CO2, along with less fps velocity fall off, so better performance overall.

The Advanced Novelty Tech CO2 HPA Conversion Kit  is fairly easy to install and ANT even has some inctructional videos showing you how to do this.

Stay posted as I will be making a field test performance test using the ANT Advanced Novelty Tech CO2 HPA Conversion Kit with my KWC Mini UZI Full Auto BB Machine gun :)

We recently recieved a KJWorls shipment so make sure to take a look at the full line of top quality KJWorks items we have in our Canada Replica Airguns Online Store.

In this preview Update Vimeo Video I take a quick look at the following ASG Airsoft and BB Guns...

ASG Marsushin Deringer Chrome Gas Airsoft Pistol:

• Ammo Capacity: 2

• Green Gas

• Weight: 215 gram (.5 pounds)

• Power: 77 m/s (252 fps)

• Plastic Frame / Metal Grips

ASG MK2 Dual Tone CO2 Airsoft Pistol:

• Ammo Capacity: 15

• 12 Gram CO2

• Weight: 790 gram (1.8 pounds)

• Power: 127 m/s (417 fps)

• Metal and Plastic

ASG CZ 75 CO2 Blowback BB Pistol:

• Ammo Capacity: 17

• 12 Gram CO2

• Weight: 950 gram (2.1 pounds)

• Power: 95 m/s (312 fps)

• Mostly Metal

ASG US Marine MEU Limited 1911 Gas Blowback Pistol:

• Ammo Capacity: 15

• Gas Blowback

• Weight: 1020 gram (2.3 pounds)

• Power: 86 m/s (283 fps)

• Mostly Metal

ASG CZ Scorpion VZ61 AEG Airsoft Machine Pistol:

• Ammo Capacity: 58

• Electric AEG

• Weight: 1220 gram (2.7 pounds)

• Power: 81 m/s (266 fps)

• Metal and Plastic

ASG BT5 PDW AEG Aisoft Rifle:

• Ammo Capacity: 100

• Electric AEG

• Weight: 2400 gram (5.3 pounds)

• Power: 95 m/s (310 fps)

• Metal and Plastic

ASG Franchi SAS 12 Pump Action Airsoft Shotgun:

• Ammo Capacity: 30 (3 Shot Burst)

• Spring Pump

• Weight: 1200 gram (2.7 pounds)

• Power: 85 m/s (279 fps)

• Metal and Plastic

Buy ASG MK2 Dual Tone CO2 Airsoft Pistol in Canada

Buy ASG BT5 PDW AEG Aisoft Rifle in Canada

Buy ASG US Marine MEU Limited 1911 Gas Blowback Pistol in Canada

Buy ASG CZ 75 CO2 Blowback BB Pistol in Canada

Buy ASG CZ 75 CO2 Blowback BB Pistol in the US

Buy ASG CZ Scorpion VZ61 AEG Airsoft Machine Pistol in Canada

Buy ASG CZ Scorpion VZ61 AEG Airsoft Machine Pistol in the US

First off let’s get one thing straight! What I’m looking for in a BB gun is more than likely going to be way different than what someone else is looking for in what they think is the “Best BB Gun” available.

Many people will determine the Best BB Gun as the BB gun that has the highest price tag, usually you get better quality the higher the price goes up but not always, there are times when perhaps you are paying for a name brand or cosmetic add ons that don’t always make the gun better or the best.

On the other hand, some people will determine the best BB gun as the one that is the least cost since they may not have a lot of money to spend, and an expensive BB gun is a BB gun that that person would not be able to afford or even own, far from an ideal or the Best BB Gun for them.

Many people only look at the specifications to determine if that particular BB gun is the outright best BB Gun. One specification that people seem to fixate on is how powerful is the BB gun in question? If it has the highest FPS then surely it must be the best BB Gun! That Pop can never saw it coming! What about cost of operation, so things like reliability and how many shots per CO2 you can get out of a BB gun. All important features to consider when picking out the Best BB Gun!

Style is another important part of what makes a BB Gun the Best option for you, are you wanting a classic BB Pistol? Perhaps a Modern BB Gun, Maybe even a BB gun that you can not get in your area because of gun laws? Style is a very individual preference and what looks good to me may look terrible to someone else.

One aspect that is very important to me, is realism, does the BB Gun operate the same and does it have similar metal and plastic parts as the real steel version? Does the BB gun I am considering have blowback operation and a true single or double action trigger like it’s big brother? What about a full size drop out magazine and the ability to field strip the BB Gun?

Some people want their BB gun for simple backyard good old fun shooting and so as long as it shoots pretty straight and works as it’s supposed to, then that is all they care about. Many real steel shooters want a BB Gun to operate exactly like their real steel version, so they can practice with it to get in more trigger time when going to a gun range is not an option.

Of course there are aspects like Reliability, Performance, Fit and Finish, Licensing and Build Quality that all determine what makes the Best BB Gun and again it really depends which of these qualities are most important to you that will determine which BB Gun is the best BB Gun.

So how do you determine which is the Best BB Gun? Make a list of what you are looking for in a BB Gun. Attributes like Cost, Performance, Build Quality, Style, Realism, Availability…

Once you have narrowed down your Best BB Gun list, get as much information on each BB Gun you are considering, to narrow the list down even more. There are tons of Youtube videos you can watch for your Best BB Gun final short list to help you determine your ultimate choice.

So please don’t ask me what the Best BB Gun is? I can not even tell you which one I like the best since my wish list changes from day to day…

I again had the opportunity to attend this years SHOT Show in Las Vegas, it has pretty much become a tradition for me now. First of all it's a great excuse to go to Las Vegas! And then there is the SHOT Show with all the big Airgun companies to go and checkout their products and of course meet some of the folks that I have been emailing. It also give my wife and I nice break from the kids, Vegas is almost like a second home to us now we have been so many times, we have our favorite eating places, of course there is the Fat Tuesdays we make sure to stop in most days for our troff of slushy boozy drink. We generally hit a show of some sort and if you like shopping, there is plenty of that to do in Las Vegas.

OK, so back to the 2015 SHOT Show, I have to say every year is a lot like the years before, most of the booths are even in the same locations so it is making it easier for me to find them, SHOT Show is a big show with lots of area to covers! Generally most companies will have all there old guns on display along with a few new ones, for me I am there to see what's new and I am sure most of you are interested in the upcoming products as well.

I know many of my American viewers have been wanting a Single Action Army 45 Revolvers and I too have been asking for this classic Cowboy revolver, I have even mentioned this to the big companies the past several years. Well I guess they finally got the message! Umarex is releasing their Colt Single Action Army 45 in a few different configurations. Their run of 500 Limited edition US Marshal revolvers sold out within the first few hours but I got my name on one this time so look forward to that review when I get mine :) Don't worry if you don't manage to get your hands on one of the US Marshal Single Action Army's, there will be two other none limited edition versions, one in silver and one in blued, both with bone handles. Like the Dan Wesson and Colt 357 shell loading BB revolvers, the Colt Single Action Army pistols will be mostly metal and also have removable shells that you place the BB's into. You will have to load each shell one at a time into the Colts, just like the old cowboy versions. The 12 gram CO2 is located in the pistol grip as expected and all version shoot in single action only as the name indicates.

Another noteworthy Umarex new product is the Umarex Pietro Beretta 92 A1 which is a pretty much full metal licensed Beretta with full blowback and a full size drop out metal magazine that holds the BB's and CO2. Umarex also added the KWC Luger and Mauser to their line off classic Blowback BB pistols this year.

ASG had some interesting offerings, they showed me a new styled Dan Wesson that will be able to accept a sight rail, it will come in Steel 4.5mm BB, 6mm Airsoft and .177 caliber Pellet. The new style Dan Wesson will not include the sight rail but you will be able to purchase it separately.

While visiting ASG I played around with their new Airsoft CZ P-09 full blowback semi auto pistol, wow the slide felt good, I am pretty sure the ASG Airsoft CZ P-09 is going to be a lot of fun to shoot!

Crosman didn't have a lot in terms of Replica guns which is not all that unusual for them, I did get my hands on their new P15B Blowback BB Pistol, I am not sure if it is the final version or a prototype at this point? The Crosman P15B has blowback action but no slide catch or slide lock, it sports a drop out full metal stick styled magazine and kind of looks like a cross between a Sig Sauer and a Desert Eagle.

Gamo, again, not known for their huge selection of replica guns did have an interesting new revolver, the PR-776 which is based on the shell loading Win Gun Frame but instead of incorporating removable shells, you load .177 caliber pellets directly into the cylinder of the PR-776.

I got to take a close up look at the Gletcher .177 caliber brass shells for their 357 series CO2 revolvers and they are a lot different than the Dan Wesson version of pellet loading brass shells. Instead of screwing together they press together and have a rubber O-ring system to help them seal tightly.

Even though I don't sell many KWA branded pistols, I do occasionally bump into them when companies like Umarex or ASG use them in their licensed lines. I did like their Scorpion KZ61, hopefully I will get to try one out sooner than later...

Well that's about it for this years SHOT Show Las Vegas 2015, until I return again in 2016 :)

Here is a Press Release taken from the NFA website, I have also made a YouTube Video going over all of this in my own words and what it really means for us law abiding airgun owners in Canada so make sure to watch my video below for further explanation...

"On Wednesday, November 5, the Supreme Court of Canada issued its ruling R. v. Dunn, finding that most air guns are considered “firearms” for all purposes in the Criminal Code except for licensing and registration.

The Court affirmed the previous decision of the Ontario Court of Appeal, which itself had overruled a decade of its own jurisprudence in finding that air guns are “firearms”. Prior to this case, the courts had held that air guns are not treated as “firearms” unless they are used for some offensive or unlawful purpose.

This decision applies to all air guns that are capable of causing serious bodily injury or death. Most courts have found that any air gun with a velocity of more than 214 feet-per-second meets this threshold. The vast majority of air guns sold across the country are capable of such a velocity.

This decision will have numerous significant impacts on those who buy and use air guns lawfully in Canada.

First of all, the Criminal Code provisions regarding careless storage, use and transportation of firearms now apply to air guns. Therefore, it is an offence to store or transport an air gun in a “careless” manner. However, because the ordinary firearms Storage Regulations do not apply to air guns, air gun owners are left with absolutely no guidance as to what precisely constitutes careless storage of an air gun.

It will be left up to police, prosecutors and courts to determine what charges will be laid, which will be prosecuted and ultimately who will be found guilty of this nebulous and ambiguous offence.

Moreover, as air gun owners do not require a license or a firearms safety course to possess these items, law-abiding Canadians will not be put on notice of the new legal requirements for air gun use, storage, transportation, etc.

Secondly, the offence of “carrying a concealed weapon” now applies to air guns, regardless of whether or not the air gun owner acts in an otherwise lawful manner. Placing an air gun in a backpack, a pocket or other concealed place will now be a criminal offence.

As the Supreme Court has ruled on this issue, the only route forward is through legislative amendment. Canada’s National Firearms Association has been extremely active on this front and will continue to pressure the government and provide all assistance in order to see that this decision be responded to by Parliament."

Canada’s National Firearms Association is this country’s largest and most effective advocacy organization representing the interests of firearms owners and users.

My big concern with this new Supreme Court of Canada ruling is that it really only effects law abiding Canadians. The criminals are not going to be worrying about how they store, transport and handle an airgun and since this new "airgun rule" does not change how an airgun can be purchased, or the fact that a criminal can still be charged with a gun crime while using an airgun in a crime, nothing has really changed by this new law from a criminals perspective.

Even more disturbing is the fact that the vast majority of airgun owners are now criminals since most will not be storing their airguns in the same way a firearm needs to be stored. Most Airgun owners do not have a PAL Firearms license, so they will have no idea of this new airgun ruling or even be educated on firearms handling and regulations, making most airgun owners criminals because for the most part, they will be storing, transporting and handling airguns in an unlawful manner now according to this new airgun ruling.

Links:

• RCMP on Airguns
• Safe Storage and Handling of Firearms
• NFA Press Release

This YouTube video was made to touch upon the tragic shooting and death of a young man at the Beavercreek Walmart in the US. The tragedy was the result of poor judgment and misunderstanding of the situation that started with John Crawford (22) deciding to walk around a Walmart store with a very realistic looking replica Air Rifle. Subsequently in the midst of all the excitement as customers ran out of the store, Angela Williams (37) had a medical emergency that also cost her her life. 

Below is an outline of YouTube video that follows:

John Crawford 22 Years old was shot  by police in a Beavercreek Walmart while holding a Crosman MK-177 Pellet BB gun.

Another death as a result: Angela Williams, 37, was with her 9-year-old daughter and suffered a medical emergency and died as a result as people attempted to flee the store amongst the panic.

John Crawford is Survived by: LeeCee Johnson, 22 Mother of Crawford's children (Believe he had 2 children)

NOTES: 

• Walmart US keeps these guns on shelf in the box generally, but not locked up or behind glass.
• In Canada Most places keep even Airguns behind locked glass. 

The weapon (Crosman MK-177), which can shoot both pellets and BBs, had been removed from its original packaging, was this done by John Crawford or was it already unpackaged when he picked it up?

Ronald Ritchie made the original 911 call, I listened to two of the police 911 phone call recording and he seemed to be talking level headed and not making it out to be anything more than what he saw which was a black man walking around a Walmart with what looked like a real rifle. John Crawford was holding the rifle while he had his phone between his shoulder and ear, John was fiddling with the rifle and looked to be trying to load it. Ronald Ritchie said John was periodically pointing it at people (which may or may not have been intentional).

LeeCee Johnson, 22, who identified herself as the mother of Crawford’s children, said she was talking to Crawford on her cell phone at the time of the shooting:

“We was just talking. He (John) said he was at the video games playing videos and he went over there by the toy section where the toy guns were. And the next thing I know, he said ‘It’s not real,’ and the police start shooting and they said ‘Get on the ground,’ but he was already on the ground because they had shot him,” she said. She added she “could hear him just crying and screaming” and said officers “shot him down like he was not even human.”

First and Foremost, this event is very tragic and my condolences go out to the families and friends of John Crawford and Angela Williams.

Questions we need to ask ourselves:

• Why was John Crawford walking around the Walmart with what looked like an "assault rifle" in a very public location?
• With all the public shootings these days, why would you walk around a public Walmart with what looks like a very real and threatening rifle, similar to the kinds used in these types of shootings in the past?
• Why did the police seem so quick to shoot John down? Where they a bit eager or hyped up? It would be very interesting to see the surveillance video for this tragedy?
• Why are very realistic Airguns on open display and so easy to attain? Keep in mind even a regular break barrel Airgun looks like a real rifle to most people.

What is so damaging about all this:

• This will add "ammunition so to speak" for bureaucrats and authorities to question if Airguns should look realistic, or if they now need to have bright colored markings all over them so people will assume they are not reel? Or perhaps outlaw them completely or make them very hard to attain for the average person.
• Now the general public will have yet another reason to have a negative view on Airguns. I fear that putting more restrictions on airguns is just a stepping stone to more restrictions on real guns and more restrictions on our rights overall.

What ever happened to common sense? It has become uncommon these days…

 Based on how easy it is for a person to get their hands on very realistic looking Airguns in most US based retail stores, I am surprised this tragedy has not happened already, or more often.

Would you walk around your neighborhood with what looks like an Assault rifle? So why walk around a Walmart with one?

Unfortunately we can not protect everyone from themselves, the more failsafes we put in place, the less reasonability people have for themselves and the more responsibility it seems is placed on businesses, government, organizations, parks and events…

We even need warning labels on our coffee telling us it's hot, or to not put poison in our mouths, there are railing and barriers around any bit of water or slight ledge.

Society is programing people to think less fore themselves and trust that everything is going to be OK.

Well it's not true, there is still something called survival of the fittest no matter how many safety nest are in place.

We need to spend more time teaching our kids how to act and behave and how to think for themselves and not be so dependent on everyone else to protect them from themselves. Don't  leave it up to the TV, movies, video games or even their just as oblivious friends. 

Make sure to also checkout my full Table Top Review where you will find more details and specifications for the KWC Luger P-08 Airsoft replica pistol which is virtually the same gun as the 4.5mm BB version with the only real difference being the ammo type and the amount of rounds per magazine (21 rounds for the 4.5mm BB version and 15 rounds for the 6mm Airsoft version).

I have also already made a full Field Test Shooting Review for the Airsoft version of this CO2 Blowback Pistol where I got very similar results using slightly heavier .25 gram Airsoft BB's so again, make sure to checkout that YouTube Video Filed Test Review.

Basically in this YouTube video, I shoot the 4.5mm Steel BB version of the KWC P-08 Luger head to head against the Airsoft Version to see how they compare in terms of Feet Per Second speed and Accuracy from30 feet away from a paper target using a semi rested shooting stance. As expected the heavier 4.5mm Steel BB's shot a bit slower but did seem to have a slight advantage in the accuracy department.

Watch my YouTube Field Test Head to Head Shooting video of the KWC Luger P-08 CO2 Blowback Replica Pistols to see how they both compared:

Buy the KWC Luger P-08 in the Canada Store

This topic of Blowback Airguns Versus Non-blowback Airguns comes up often so I thought I would address it a second time around since I get a lot of new visitors and subscribers daily who may not have watched my first video explanation on this topic. You can also checkout my first video on this subject since there may be some stuff I missed out in this video second video ;)

There are really two types of people asking or commenting on Blowback Airguns Versus Non-blowback Airguns. The first type of person who genuinely wants to know which is best and for what reasons. Then there is the other kind of person who makes a narrow minded statement that one type is clearly better than the other type, based on their own preferences and interests but not considering that there are other people out there with different opinions and preferences than them. You know who you are and we all know you are not going to change cause that would require an open mind...

Here is a list of the Pros and Cons I go over for each style of Airgun:

Pros:

• Blowback guns simulate recoil.

• Blowback guns can have better and more true triggers compared to their real steel counterparts.

• Blowback guns can be better suited for action shooting.

• Blowback guns are better as prop guns.

• Blowback guns are generally more realistic in terms of mechanics.

• Non-blowback guns generally use less CO2 per shot.

• Non-blowback guns generally have higher fps.

• Non-blowback guns can be more accurate.

• Non-blowback guns can be more reliable.

• Non-blowback guns can be less expensive.

Cons:

• Blowback guns generally get less shots per CO2.

• Blowback guns generally have lower fps.

• Blowback guns can be less accurate.

• Blowback guns can be less reliable.

• Blowback guns can be more costly. 

• Non-blowback guns do not simulate recoil.

• Non-blowback guns do not have true single action only triggers.

• Non-blowback guns generally have heavier triggers that slow down shooting performance.

• Non-blowback guns are generally not as good for prop use and or training.

• Non-blowback guns generally are not as realistic compared to their real steel counterparts. 

Watch my Vimeo video where I go into detail on Blowback Airguns Versus Non-blowback Airguns again ;)